/******************************************************************************
*
- * Copyright(c) 2003 - 2007 Intel Corporation. All rights reserved.
+ * Copyright(c) 2003 - 2008 Intel Corporation. All rights reserved.
*
* Portions of this file are derived from the ipw3945 project, as well
* as portions of the ieee80211 subsystem header files.
#include <asm/div64.h>
+#include "iwl-3945-core.h"
#include "iwl-3945.h"
#include "iwl-helpers.h"
******************************************************************************/
/* module parameters */
-static int iwl3945_param_disable_hw_scan;
-static int iwl3945_param_debug;
-static int iwl3945_param_disable; /* def: enable radio */
+static int iwl3945_param_disable_hw_scan; /* def: 0 = use 3945's h/w scan */
+static int iwl3945_param_debug; /* def: 0 = minimal debug log messages */
+static int iwl3945_param_disable; /* def: 0 = enable radio */
static int iwl3945_param_antenna; /* def: 0 = both antennas (use diversity) */
-int iwl3945_param_hwcrypto; /* def: using software encryption */
-static int iwl3945_param_qos_enable = 1;
-int iwl3945_param_queues_num = IWL_MAX_NUM_QUEUES;
+int iwl3945_param_hwcrypto; /* def: 0 = use software encryption */
+static int iwl3945_param_qos_enable = 1; /* def: 1 = use quality of service */
+int iwl3945_param_queues_num = IWL39_MAX_NUM_QUEUES; /* def: 8 Tx queues */
/*
* module name, copyright, version, etc.
#define VS
#endif
-#define IWLWIFI_VERSION "1.1.19k" VD VS
-#define DRV_COPYRIGHT "Copyright(c) 2003-2007 Intel Corporation"
+#define IWLWIFI_VERSION "1.2.26k" VD VS
+#define DRV_COPYRIGHT "Copyright(c) 2003-2008 Intel Corporation"
#define DRV_VERSION IWLWIFI_VERSION
-/* Change firmware file name, using "-" and incrementing number,
- * *only* when uCode interface or architecture changes so that it
- * is not compatible with earlier drivers.
- * This number will also appear in << 8 position of 1st dword of uCode file */
-#define IWL3945_UCODE_API "-1"
MODULE_DESCRIPTION(DRV_DESCRIPTION);
MODULE_VERSION(DRV_VERSION);
MODULE_AUTHOR(DRV_COPYRIGHT);
MODULE_LICENSE("GPL");
-static __le16 *ieee80211_get_qos_ctrl(struct ieee80211_hdr *hdr)
+static const struct ieee80211_supported_band *iwl3945_get_band(
+ struct iwl3945_priv *priv, enum ieee80211_band band)
{
- u16 fc = le16_to_cpu(hdr->frame_control);
- int hdr_len = ieee80211_get_hdrlen(fc);
-
- if ((fc & 0x00cc) == (IEEE80211_STYPE_QOS_DATA | IEEE80211_FTYPE_DATA))
- return (__le16 *) ((u8 *) hdr + hdr_len - QOS_CONTROL_LEN);
- return NULL;
-}
-
-static const struct ieee80211_hw_mode *iwl3945_get_hw_mode(
- struct iwl3945_priv *priv, int mode)
-{
- int i;
-
- for (i = 0; i < 3; i++)
- if (priv->modes[i].mode == mode)
- return &priv->modes[i];
-
- return NULL;
+ return priv->hw->wiphy->bands[band];
}
static int iwl3945_is_empty_essid(const char *essid, int essid_len)
return escaped;
}
-static void iwl3945_print_hex_dump(int level, void *p, u32 len)
-{
-#ifdef CONFIG_IWL3945_DEBUG
- if (!(iwl3945_debug_level & level))
- return;
-
- print_hex_dump(KERN_DEBUG, "iwl data: ", DUMP_PREFIX_OFFSET, 16, 1,
- p, len, 1);
-#endif
-}
-
/*************** DMA-QUEUE-GENERAL-FUNCTIONS *****
* DMA services
*
* Theory of operation
*
- * A queue is a circular buffers with 'Read' and 'Write' pointers.
- * 2 empty entries always kept in the buffer to protect from overflow.
+ * A Tx or Rx queue resides in host DRAM, and is comprised of a circular buffer
+ * of buffer descriptors, each of which points to one or more data buffers for
+ * the device to read from or fill. Driver and device exchange status of each
+ * queue via "read" and "write" pointers. Driver keeps minimum of 2 empty
+ * entries in each circular buffer, to protect against confusing empty and full
+ * queue states.
+ *
+ * The device reads or writes the data in the queues via the device's several
+ * DMA/FIFO channels. Each queue is mapped to a single DMA channel.
*
* For Tx queue, there are low mark and high mark limits. If, after queuing
* the packet for Tx, free space become < low mark, Tx queue stopped. When
* reclaiming packets (on 'tx done IRQ), if free space become > high mark,
* Tx queue resumed.
*
- * The IWL operates with six queues, one receive queue in the device's
- * sram, one transmit queue for sending commands to the device firmware,
- * and four transmit queues for data.
+ * The 3945 operates with six queues: One receive queue, one transmit queue
+ * (#4) for sending commands to the device firmware, and four transmit queues
+ * (#0-3) for data tx via EDCA. An additional 2 HCCA queues are unused.
***************************************************/
-static int iwl3945_queue_space(const struct iwl3945_queue *q)
+int iwl3945_queue_space(const struct iwl3945_queue *q)
{
int s = q->read_ptr - q->write_ptr;
return s;
}
-/* XXX: n_bd must be power-of-two size */
-static inline int iwl3945_queue_inc_wrap(int index, int n_bd)
-{
- return ++index & (n_bd - 1);
-}
-
-/* XXX: n_bd must be power-of-two size */
-static inline int iwl3945_queue_dec_wrap(int index, int n_bd)
-{
- return --index & (n_bd - 1);
-}
-
-static inline int x2_queue_used(const struct iwl3945_queue *q, int i)
+int iwl3945_x2_queue_used(const struct iwl3945_queue *q, int i)
{
return q->write_ptr > q->read_ptr ?
(i >= q->read_ptr && i < q->write_ptr) :
!(i < q->read_ptr && i >= q->write_ptr);
}
+
static inline u8 get_cmd_index(struct iwl3945_queue *q, u32 index, int is_huge)
{
+ /* This is for scan command, the big buffer at end of command array */
if (is_huge)
- return q->n_window;
+ return q->n_window; /* must be power of 2 */
+ /* Otherwise, use normal size buffers */
return index & (q->n_window - 1);
}
+/**
+ * iwl3945_queue_init - Initialize queue's high/low-water and read/write indexes
+ */
static int iwl3945_queue_init(struct iwl3945_priv *priv, struct iwl3945_queue *q,
int count, int slots_num, u32 id)
{
q->n_window = slots_num;
q->id = id;
- /* count must be power-of-two size, otherwise iwl3945_queue_inc_wrap
- * and iwl3945_queue_dec_wrap are broken. */
+ /* count must be power-of-two size, otherwise iwl_queue_inc_wrap
+ * and iwl_queue_dec_wrap are broken. */
BUG_ON(!is_power_of_2(count));
/* slots_num must be power-of-two size, otherwise
return 0;
}
+/**
+ * iwl3945_tx_queue_alloc - Alloc driver data and TFD CB for one Tx/cmd queue
+ */
static int iwl3945_tx_queue_alloc(struct iwl3945_priv *priv,
struct iwl3945_tx_queue *txq, u32 id)
{
struct pci_dev *dev = priv->pci_dev;
+ /* Driver private data, only for Tx (not command) queues,
+ * not shared with device. */
if (id != IWL_CMD_QUEUE_NUM) {
txq->txb = kmalloc(sizeof(txq->txb[0]) *
TFD_QUEUE_SIZE_MAX, GFP_KERNEL);
} else
txq->txb = NULL;
+ /* Circular buffer of transmit frame descriptors (TFDs),
+ * shared with device */
txq->bd = pci_alloc_consistent(dev,
sizeof(txq->bd[0]) * TFD_QUEUE_SIZE_MAX,
&txq->q.dma_addr);
return -ENOMEM;
}
+/**
+ * iwl3945_tx_queue_init - Allocate and initialize one tx/cmd queue
+ */
int iwl3945_tx_queue_init(struct iwl3945_priv *priv,
struct iwl3945_tx_queue *txq, int slots_num, u32 txq_id)
{
int len;
int rc = 0;
- /* allocate command space + one big command for scan since scan
- * command is very huge the system will not have two scan at the
- * same time */
+ /*
+ * Alloc buffer array for commands (Tx or other types of commands).
+ * For the command queue (#4), allocate command space + one big
+ * command for scan, since scan command is very huge; the system will
+ * not have two scans at the same time, so only one is needed.
+ * For data Tx queues (all other queues), no super-size command
+ * space is needed.
+ */
len = sizeof(struct iwl3945_cmd) * slots_num;
if (txq_id == IWL_CMD_QUEUE_NUM)
len += IWL_MAX_SCAN_SIZE;
if (!txq->cmd)
return -ENOMEM;
+ /* Alloc driver data array and TFD circular buffer */
rc = iwl3945_tx_queue_alloc(priv, txq, txq_id);
if (rc) {
pci_free_consistent(dev, len, txq->cmd, txq->dma_addr_cmd);
txq->need_update = 0;
/* TFD_QUEUE_SIZE_MAX must be power-of-two size, otherwise
- * iwl3945_queue_inc_wrap and iwl3945_queue_dec_wrap are broken. */
+ * iwl_queue_inc_wrap and iwl_queue_dec_wrap are broken. */
BUILD_BUG_ON(TFD_QUEUE_SIZE_MAX & (TFD_QUEUE_SIZE_MAX - 1));
+
+ /* Initialize queue high/low-water, head/tail indexes */
iwl3945_queue_init(priv, &txq->q, TFD_QUEUE_SIZE_MAX, slots_num, txq_id);
+ /* Tell device where to find queue, enable DMA channel. */
iwl3945_hw_tx_queue_init(priv, txq);
return 0;
* @txq: Transmit queue to deallocate.
*
* Empty queue by removing and destroying all BD's.
- * Free all buffers. txq itself is not freed.
- *
+ * Free all buffers.
+ * 0-fill, but do not free "txq" descriptor structure.
*/
void iwl3945_tx_queue_free(struct iwl3945_priv *priv, struct iwl3945_tx_queue *txq)
{
/* first, empty all BD's */
for (; q->write_ptr != q->read_ptr;
- q->read_ptr = iwl3945_queue_inc_wrap(q->read_ptr, q->n_bd))
+ q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd))
iwl3945_hw_txq_free_tfd(priv, txq);
len = sizeof(struct iwl3945_cmd) * q->n_window;
if (q->id == IWL_CMD_QUEUE_NUM)
len += IWL_MAX_SCAN_SIZE;
+ /* De-alloc array of command/tx buffers */
pci_free_consistent(dev, len, txq->cmd, txq->dma_addr_cmd);
- /* free buffers belonging to queue itself */
+ /* De-alloc circular buffer of TFDs */
if (txq->q.n_bd)
pci_free_consistent(dev, sizeof(struct iwl3945_tfd_frame) *
txq->q.n_bd, txq->bd, txq->q.dma_addr);
+ /* De-alloc array of per-TFD driver data */
if (txq->txb) {
kfree(txq->txb);
txq->txb = NULL;
}
- /* 0 fill whole structure */
+ /* 0-fill queue descriptor structure */
memset(txq, 0, sizeof(*txq));
}
/**************************************************************/
#if 0 /* temporary disable till we add real remove station */
+/**
+ * iwl3945_remove_station - Remove driver's knowledge of station.
+ *
+ * NOTE: This does not remove station from device's station table.
+ */
static u8 iwl3945_remove_station(struct iwl3945_priv *priv, const u8 *addr, int is_ap)
{
int index = IWL_INVALID_STATION;
return 0;
}
#endif
+
+/**
+ * iwl3945_clear_stations_table - Clear the driver's station table
+ *
+ * NOTE: This does not clear or otherwise alter the device's station table.
+ */
static void iwl3945_clear_stations_table(struct iwl3945_priv *priv)
{
unsigned long flags;
spin_unlock_irqrestore(&priv->sta_lock, flags);
}
-
+/**
+ * iwl3945_add_station - Add station to station tables in driver and device
+ */
u8 iwl3945_add_station(struct iwl3945_priv *priv, const u8 *addr, int is_ap, u8 flags)
{
int i;
station->used = 1;
priv->num_stations++;
+ /* Set up the REPLY_ADD_STA command to send to device */
memset(&station->sta, 0, sizeof(struct iwl3945_addsta_cmd));
memcpy(station->sta.sta.addr, addr, ETH_ALEN);
station->sta.mode = 0;
station->sta.sta.sta_id = index;
station->sta.station_flags = 0;
- if (priv->phymode == MODE_IEEE80211A)
+ if (priv->band == IEEE80211_BAND_5GHZ)
rate = IWL_RATE_6M_PLCP;
else
rate = IWL_RATE_1M_PLCP;
le16_to_cpu(station->sta.rate_n_flags);
spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
+
+ /* Add station to device's station table */
iwl3945_send_add_station(priv, &station->sta, flags);
return index;
BUG_ON((fix_size > TFD_MAX_PAYLOAD_SIZE) &&
!(cmd->meta.flags & CMD_SIZE_HUGE));
+
+ if (iwl3945_is_rfkill(priv)) {
+ IWL_DEBUG_INFO("Not sending command - RF KILL");
+ return -EIO;
+ }
+
if (iwl3945_queue_space(q) < ((cmd->meta.flags & CMD_ASYNC) ? 2 : 1)) {
IWL_ERROR("No space for Tx\n");
return -ENOSPC;
fix_size, q->write_ptr, idx, IWL_CMD_QUEUE_NUM);
txq->need_update = 1;
- q->write_ptr = iwl3945_queue_inc_wrap(q->write_ptr, q->n_bd);
+
+ /* Increment and update queue's write index */
+ q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd);
ret = iwl3945_tx_queue_update_write_ptr(priv, txq);
spin_unlock_irqrestore(&priv->hcmd_lock, flags);
{
int cmd_idx;
int ret;
- static atomic_t entry = ATOMIC_INIT(0); /* reentrance protection */
BUG_ON(cmd->meta.flags & CMD_ASYNC);
/* A synchronous command can not have a callback set. */
BUG_ON(cmd->meta.u.callback != NULL);
- if (atomic_xchg(&entry, 1)) {
+ if (test_and_set_bit(STATUS_HCMD_SYNC_ACTIVE, &priv->status)) {
IWL_ERROR("Error sending %s: Already sending a host command\n",
get_cmd_string(cmd->id));
- return -EBUSY;
+ ret = -EBUSY;
+ goto out;
}
set_bit(STATUS_HCMD_ACTIVE, &priv->status);
cmd->meta.u.skb = NULL;
}
out:
- atomic_set(&entry, 0);
+ clear_bit(STATUS_HCMD_SYNC_ACTIVE, &priv->status);
return ret;
}
/**
* iwl3945_set_rxon_channel - Set the phymode and channel values in staging RXON
- * @phymode: MODE_IEEE80211A sets to 5.2GHz; all else set to 2.4GHz
- * @channel: Any channel valid for the requested phymode
+ * @band: 2.4 or 5 GHz band
+ * @channel: Any channel valid for the requested band
- * In addition to setting the staging RXON, priv->phymode is also set.
+ * In addition to setting the staging RXON, priv->band is also set.
*
* NOTE: Does not commit to the hardware; it sets appropriate bit fields
- * in the staging RXON flag structure based on the phymode
+ * in the staging RXON flag structure based on the band
*/
-static int iwl3945_set_rxon_channel(struct iwl3945_priv *priv, u8 phymode, u16 channel)
+static int iwl3945_set_rxon_channel(struct iwl3945_priv *priv,
+ enum ieee80211_band band,
+ u16 channel)
{
- if (!iwl3945_get_channel_info(priv, phymode, channel)) {
+ if (!iwl3945_get_channel_info(priv, band, channel)) {
IWL_DEBUG_INFO("Could not set channel to %d [%d]\n",
- channel, phymode);
+ channel, band);
return -EINVAL;
}
if ((le16_to_cpu(priv->staging_rxon.channel) == channel) &&
- (priv->phymode == phymode))
+ (priv->band == band))
return 0;
priv->staging_rxon.channel = cpu_to_le16(channel);
- if (phymode == MODE_IEEE80211A)
+ if (band == IEEE80211_BAND_5GHZ)
priv->staging_rxon.flags &= ~RXON_FLG_BAND_24G_MSK;
else
priv->staging_rxon.flags |= RXON_FLG_BAND_24G_MSK;
- priv->phymode = phymode;
+ priv->band = band;
- IWL_DEBUG_INFO("Staging channel set to %d [%d]\n", channel, phymode);
+ IWL_DEBUG_INFO("Staging channel set to %d [%d]\n", channel, band);
return 0;
}
return -EIO;
}
- /* Init the hardware's rate fallback order based on the
- * phymode */
+ /* Init the hardware's rate fallback order based on the band */
rc = iwl3945_init_hw_rate_table(priv);
if (rc) {
IWL_ERROR("Error setting HW rate table: %02X\n", rc);
return priv->ibss_beacon->len;
}
-static int iwl3945_rate_index_from_plcp(int plcp)
-{
- int i = 0;
-
- for (i = 0; i < IWL_RATE_COUNT; i++)
- if (iwl3945_rates[i].plcp == plcp)
- return i;
- return -1;
-}
-
static u8 iwl3945_rate_get_lowest_plcp(int rate_mask)
{
u8 i;
memcpy(mac, priv->eeprom.mac_address, 6);
}
+/*
+ * Clear the OWNER_MSK, to establish driver (instead of uCode running on
+ * embedded controller) as EEPROM reader; each read is a series of pulses
+ * to/from the EEPROM chip, not a single event, so even reads could conflict
+ * if they weren't arbitrated by some ownership mechanism. Here, the driver
+ * simply claims ownership, which should be safe when this function is called
+ * (i.e. before loading uCode!).
+ */
+static inline int iwl3945_eeprom_acquire_semaphore(struct iwl3945_priv *priv)
+{
+ _iwl3945_clear_bit(priv, CSR_EEPROM_GP, CSR_EEPROM_GP_IF_OWNER_MSK);
+ return 0;
+}
+
/**
* iwl3945_eeprom_init - read EEPROM contents
*
- * Load the EEPROM from adapter into priv->eeprom
+ * Load the EEPROM contents from adapter into priv->eeprom
*
* NOTE: This routine uses the non-debug IO access functions.
*/
return -ENOENT;
}
+ /* Make sure driver (instead of uCode) is allowed to read EEPROM */
rc = iwl3945_eeprom_acquire_semaphore(priv);
if (rc < 0) {
IWL_ERROR("Failed to acquire EEPROM semaphore.\n");
IWL_ERROR("Time out reading EEPROM[%d]", addr);
return -ETIMEDOUT;
}
- e[addr / 2] = le16_to_cpu(r >> 16);
+ e[addr / 2] = le16_to_cpu((__force __le16)(r >> 16));
}
return 0;
}
-/******************************************************************************
- *
- * Misc. internal state and helper functions
- *
- ******************************************************************************/
-#ifdef CONFIG_IWL3945_DEBUG
-
-/**
- * iwl3945_report_frame - dump frame to syslog during debug sessions
- *
- * You may hack this function to show different aspects of received frames,
- * including selective frame dumps.
- * group100 parameter selects whether to show 1 out of 100 good frames.
- */
-void iwl3945_report_frame(struct iwl3945_priv *priv,
- struct iwl3945_rx_packet *pkt,
- struct ieee80211_hdr *header, int group100)
-{
- u32 to_us;
- u32 print_summary = 0;
- u32 print_dump = 0; /* set to 1 to dump all frames' contents */
- u32 hundred = 0;
- u32 dataframe = 0;
- u16 fc;
- u16 seq_ctl;
- u16 channel;
- u16 phy_flags;
- int rate_sym;
- u16 length;
- u16 status;
- u16 bcn_tmr;
- u32 tsf_low;
- u64 tsf;
- u8 rssi;
- u8 agc;
- u16 sig_avg;
- u16 noise_diff;
- struct iwl3945_rx_frame_stats *rx_stats = IWL_RX_STATS(pkt);
- struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt);
- struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt);
- u8 *data = IWL_RX_DATA(pkt);
-
- /* MAC header */
- fc = le16_to_cpu(header->frame_control);
- seq_ctl = le16_to_cpu(header->seq_ctrl);
-
- /* metadata */
- channel = le16_to_cpu(rx_hdr->channel);
- phy_flags = le16_to_cpu(rx_hdr->phy_flags);
- rate_sym = rx_hdr->rate;
- length = le16_to_cpu(rx_hdr->len);
-
- /* end-of-frame status and timestamp */
- status = le32_to_cpu(rx_end->status);
- bcn_tmr = le32_to_cpu(rx_end->beacon_timestamp);
- tsf_low = le64_to_cpu(rx_end->timestamp) & 0x0ffffffff;
- tsf = le64_to_cpu(rx_end->timestamp);
-
- /* signal statistics */
- rssi = rx_stats->rssi;
- agc = rx_stats->agc;
- sig_avg = le16_to_cpu(rx_stats->sig_avg);
- noise_diff = le16_to_cpu(rx_stats->noise_diff);
-
- to_us = !compare_ether_addr(header->addr1, priv->mac_addr);
-
- /* if data frame is to us and all is good,
- * (optionally) print summary for only 1 out of every 100 */
- if (to_us && (fc & ~IEEE80211_FCTL_PROTECTED) ==
- (IEEE80211_FCTL_FROMDS | IEEE80211_FTYPE_DATA)) {
- dataframe = 1;
- if (!group100)
- print_summary = 1; /* print each frame */
- else if (priv->framecnt_to_us < 100) {
- priv->framecnt_to_us++;
- print_summary = 0;
- } else {
- priv->framecnt_to_us = 0;
- print_summary = 1;
- hundred = 1;
- }
- } else {
- /* print summary for all other frames */
- print_summary = 1;
- }
-
- if (print_summary) {
- char *title;
- u32 rate;
-
- if (hundred)
- title = "100Frames";
- else if (fc & IEEE80211_FCTL_RETRY)
- title = "Retry";
- else if (ieee80211_is_assoc_response(fc))
- title = "AscRsp";
- else if (ieee80211_is_reassoc_response(fc))
- title = "RasRsp";
- else if (ieee80211_is_probe_response(fc)) {
- title = "PrbRsp";
- print_dump = 1; /* dump frame contents */
- } else if (ieee80211_is_beacon(fc)) {
- title = "Beacon";
- print_dump = 1; /* dump frame contents */
- } else if (ieee80211_is_atim(fc))
- title = "ATIM";
- else if (ieee80211_is_auth(fc))
- title = "Auth";
- else if (ieee80211_is_deauth(fc))
- title = "DeAuth";
- else if (ieee80211_is_disassoc(fc))
- title = "DisAssoc";
- else
- title = "Frame";
-
- rate = iwl3945_rate_index_from_plcp(rate_sym);
- if (rate == -1)
- rate = 0;
- else
- rate = iwl3945_rates[rate].ieee / 2;
-
- /* print frame summary.
- * MAC addresses show just the last byte (for brevity),
- * but you can hack it to show more, if you'd like to. */
- if (dataframe)
- IWL_DEBUG_RX("%s: mhd=0x%04x, dst=0x%02x, "
- "len=%u, rssi=%d, chnl=%d, rate=%u, \n",
- title, fc, header->addr1[5],
- length, rssi, channel, rate);
- else {
- /* src/dst addresses assume managed mode */
- IWL_DEBUG_RX("%s: 0x%04x, dst=0x%02x, "
- "src=0x%02x, rssi=%u, tim=%lu usec, "
- "phy=0x%02x, chnl=%d\n",
- title, fc, header->addr1[5],
- header->addr3[5], rssi,
- tsf_low - priv->scan_start_tsf,
- phy_flags, channel);
- }
- }
- if (print_dump)
- iwl3945_print_hex_dump(IWL_DL_RX, data, length);
-}
-#endif
-
static void iwl3945_unset_hw_setting(struct iwl3945_priv *priv)
{
if (priv->hw_setting.shared_virt)
/*
* QoS support
*/
-#ifdef CONFIG_IWL3945_QOS
static int iwl3945_send_qos_params_command(struct iwl3945_priv *priv,
struct iwl3945_qosparam_cmd *qos)
{
}
}
-#endif /* CONFIG_IWL3945_QOS */
/*
* Power management (not Tx power!) functions
*/
return !compare_ether_addr(header->addr2, priv->bssid);
/* packets to our adapter go through */
return !compare_ether_addr(header->addr1, priv->mac_addr);
+ default:
+ return 1;
}
return 1;
}
-#define TX_STATUS_ENTRY(x) case TX_STATUS_FAIL_ ## x: return #x
-
-static const char *iwl3945_get_tx_fail_reason(u32 status)
-{
- switch (status & TX_STATUS_MSK) {
- case TX_STATUS_SUCCESS:
- return "SUCCESS";
- TX_STATUS_ENTRY(SHORT_LIMIT);
- TX_STATUS_ENTRY(LONG_LIMIT);
- TX_STATUS_ENTRY(FIFO_UNDERRUN);
- TX_STATUS_ENTRY(MGMNT_ABORT);
- TX_STATUS_ENTRY(NEXT_FRAG);
- TX_STATUS_ENTRY(LIFE_EXPIRE);
- TX_STATUS_ENTRY(DEST_PS);
- TX_STATUS_ENTRY(ABORTED);
- TX_STATUS_ENTRY(BT_RETRY);
- TX_STATUS_ENTRY(STA_INVALID);
- TX_STATUS_ENTRY(FRAG_DROPPED);
- TX_STATUS_ENTRY(TID_DISABLE);
- TX_STATUS_ENTRY(FRAME_FLUSHED);
- TX_STATUS_ENTRY(INSUFFICIENT_CF_POLL);
- TX_STATUS_ENTRY(TX_LOCKED);
- TX_STATUS_ENTRY(NO_BEACON_ON_RADAR);
- }
-
- return "UNKNOWN";
-}
-
/**
* iwl3945_scan_cancel - Cancel any currently executing HW scan
*
return 0;
}
-static void iwl3945_set_flags_for_phymode(struct iwl3945_priv *priv, u8 phymode)
+static void iwl3945_set_flags_for_phymode(struct iwl3945_priv *priv,
+ enum ieee80211_band band)
{
- if (phymode == MODE_IEEE80211A) {
+ if (band == IEEE80211_BAND_5GHZ) {
priv->staging_rxon.flags &=
~(RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK
| RXON_FLG_CCK_MSK);
priv->staging_rxon.filter_flags = RXON_FILTER_PROMISC_MSK |
RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_ACCEPT_GRP_MSK;
break;
+ default:
+ IWL_ERROR("Unsupported interface type %d\n", priv->iw_mode);
+ break;
}
#if 0
priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
#endif
- ch_info = iwl3945_get_channel_info(priv, priv->phymode,
+ ch_info = iwl3945_get_channel_info(priv, priv->band,
le16_to_cpu(priv->staging_rxon.channel));
if (!ch_info)
priv->staging_rxon.channel = cpu_to_le16(ch_info->channel);
if (is_channel_a_band(ch_info))
- priv->phymode = MODE_IEEE80211A;
+ priv->band = IEEE80211_BAND_5GHZ;
else
- priv->phymode = MODE_IEEE80211G;
+ priv->band = IEEE80211_BAND_2GHZ;
- iwl3945_set_flags_for_phymode(priv, priv->phymode);
+ iwl3945_set_flags_for_phymode(priv, priv->band);
priv->staging_rxon.ofdm_basic_rates =
(IWL_OFDM_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF;
static int iwl3945_set_mode(struct iwl3945_priv *priv, int mode)
{
- if (!iwl3945_is_ready_rf(priv))
- return -EAGAIN;
-
if (mode == IEEE80211_IF_TYPE_IBSS) {
const struct iwl3945_channel_info *ch_info;
ch_info = iwl3945_get_channel_info(priv,
- priv->phymode,
+ priv->band,
le16_to_cpu(priv->staging_rxon.channel));
if (!ch_info || !is_channel_ibss(ch_info)) {
}
}
- cancel_delayed_work(&priv->scan_check);
- if (iwl3945_scan_cancel_timeout(priv, 100)) {
- IWL_WARNING("Aborted scan still in progress after 100ms\n");
- IWL_DEBUG_MAC80211("leaving - scan abort failed.\n");
- return -EAGAIN;
- }
-
priv->iw_mode = mode;
iwl3945_connection_init_rx_config(priv);
iwl3945_clear_stations_table(priv);
+ /* dont commit rxon if rf-kill is on*/
+ if (!iwl3945_is_ready_rf(priv))
+ return -EAGAIN;
+
+ cancel_delayed_work(&priv->scan_check);
+ if (iwl3945_scan_cancel_timeout(priv, 100)) {
+ IWL_WARNING("Aborted scan still in progress after 100ms\n");
+ IWL_DEBUG_MAC80211("leaving - scan abort failed.\n");
+ return -EAGAIN;
+ }
+
iwl3945_commit_rxon(priv);
return 0;
}
static void iwl3945_build_tx_cmd_hwcrypto(struct iwl3945_priv *priv,
- struct ieee80211_tx_control *ctl,
+ struct ieee80211_tx_info *info,
struct iwl3945_cmd *cmd,
struct sk_buff *skb_frag,
int last_frag)
{
- struct iwl3945_hw_key *keyinfo = &priv->stations[ctl->key_idx].keyinfo;
+ struct iwl3945_hw_key *keyinfo =
+ &priv->stations[info->control.hw_key->hw_key_idx].keyinfo;
switch (keyinfo->alg) {
case ALG_CCMP:
case ALG_WEP:
cmd->cmd.tx.sec_ctl = TX_CMD_SEC_WEP |
- (ctl->key_idx & TX_CMD_SEC_MSK) << TX_CMD_SEC_SHIFT;
+ (info->control.hw_key->hw_key_idx & TX_CMD_SEC_MSK) << TX_CMD_SEC_SHIFT;
if (keyinfo->keylen == 13)
cmd->cmd.tx.sec_ctl |= TX_CMD_SEC_KEY128;
memcpy(&cmd->cmd.tx.key[3], keyinfo->key, keyinfo->keylen);
IWL_DEBUG_TX("Configuring packet for WEP encryption "
- "with key %d\n", ctl->key_idx);
+ "with key %d\n", info->control.hw_key->hw_key_idx);
break;
default:
*/
static void iwl3945_build_tx_cmd_basic(struct iwl3945_priv *priv,
struct iwl3945_cmd *cmd,
- struct ieee80211_tx_control *ctrl,
+ struct ieee80211_tx_info *info,
struct ieee80211_hdr *hdr,
int is_unicast, u8 std_id)
{
- __le16 *qc;
- u16 fc = le16_to_cpu(hdr->frame_control);
+ __le16 fc = hdr->frame_control;
__le32 tx_flags = cmd->cmd.tx.tx_flags;
cmd->cmd.tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
- if (!(ctrl->flags & IEEE80211_TXCTL_NO_ACK)) {
+ if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
tx_flags |= TX_CMD_FLG_ACK_MSK;
- if ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT)
+ if (ieee80211_is_mgmt(fc))
tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
- if (ieee80211_is_probe_response(fc) &&
+ if (ieee80211_is_probe_resp(fc) &&
!(le16_to_cpu(hdr->seq_ctrl) & 0xf))
tx_flags |= TX_CMD_FLG_TSF_MSK;
} else {
}
cmd->cmd.tx.sta_id = std_id;
- if (ieee80211_get_morefrag(hdr))
+ if (ieee80211_has_morefrags(fc))
tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK;
- qc = ieee80211_get_qos_ctrl(hdr);
- if (qc) {
- cmd->cmd.tx.tid_tspec = (u8) (le16_to_cpu(*qc) & 0xf);
+ if (ieee80211_is_data_qos(fc)) {
+ u8 *qc = ieee80211_get_qos_ctl(hdr);
+ cmd->cmd.tx.tid_tspec = qc[0] & 0xf;
tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK;
- } else
+ } else {
tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
+ }
- if (ctrl->flags & IEEE80211_TXCTL_USE_RTS_CTS) {
+ if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) {
tx_flags |= TX_CMD_FLG_RTS_MSK;
tx_flags &= ~TX_CMD_FLG_CTS_MSK;
- } else if (ctrl->flags & IEEE80211_TXCTL_USE_CTS_PROTECT) {
+ } else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) {
tx_flags &= ~TX_CMD_FLG_RTS_MSK;
tx_flags |= TX_CMD_FLG_CTS_MSK;
}
tx_flags |= TX_CMD_FLG_FULL_TXOP_PROT_MSK;
tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK);
- if ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) {
- if ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_ASSOC_REQ ||
- (fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_REASSOC_REQ)
+ if (ieee80211_is_mgmt(fc)) {
+ if (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc))
cmd->cmd.tx.timeout.pm_frame_timeout = cpu_to_le16(3);
else
cmd->cmd.tx.timeout.pm_frame_timeout = cpu_to_le16(2);
- } else
+ } else {
cmd->cmd.tx.timeout.pm_frame_timeout = 0;
+#ifdef CONFIG_IWL3945_LEDS
+ priv->rxtxpackets += le16_to_cpu(cmd->cmd.tx.len);
+#endif
+ }
cmd->cmd.tx.driver_txop = 0;
cmd->cmd.tx.tx_flags = tx_flags;
cmd->cmd.tx.next_frame_len = 0;
}
+/**
+ * iwl3945_get_sta_id - Find station's index within station table
+ */
static int iwl3945_get_sta_id(struct iwl3945_priv *priv, struct ieee80211_hdr *hdr)
{
int sta_id;
u16 fc = le16_to_cpu(hdr->frame_control);
- /* If this frame is broadcast or not data then use the broadcast
- * station id */
+ /* If this frame is broadcast or management, use broadcast station id */
if (((fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA) ||
is_multicast_ether_addr(hdr->addr1))
return priv->hw_setting.bcast_sta_id;
switch (priv->iw_mode) {
- /* If this frame is part of a BSS network (we're a station), then
- * we use the AP's station id */
+ /* If we are a client station in a BSS network, use the special
+ * AP station entry (that's the only station we communicate with) */
case IEEE80211_IF_TYPE_STA:
return IWL_AP_ID;
return sta_id;
return priv->hw_setting.bcast_sta_id;
- /* If this frame is part of a IBSS network, then we use the
- * target specific station id */
+ /* If this frame is going out to an IBSS network, find the station,
+ * or create a new station table entry */
case IEEE80211_IF_TYPE_IBSS: {
DECLARE_MAC_BUF(mac);
+ /* Create new station table entry */
sta_id = iwl3945_hw_find_station(priv, hdr->addr1);
if (sta_id != IWL_INVALID_STATION)
return sta_id;
/*
* start REPLY_TX command process
*/
-static int iwl3945_tx_skb(struct iwl3945_priv *priv,
- struct sk_buff *skb, struct ieee80211_tx_control *ctl)
+static int iwl3945_tx_skb(struct iwl3945_priv *priv, struct sk_buff *skb)
{
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct iwl3945_tfd_frame *tfd;
u32 *control_flags;
- int txq_id = ctl->queue;
+ int txq_id = skb_get_queue_mapping(skb);
struct iwl3945_tx_queue *txq = NULL;
struct iwl3945_queue *q = NULL;
dma_addr_t phys_addr;
dma_addr_t txcmd_phys;
struct iwl3945_cmd *out_cmd = NULL;
- u16 len, idx, len_org;
- u8 id, hdr_len, unicast;
+ u16 len, idx, len_org, hdr_len;
+ u8 id;
+ u8 unicast;
u8 sta_id;
+ u8 tid = 0;
u16 seq_number = 0;
- u16 fc;
- __le16 *qc;
+ __le16 fc;
u8 wait_write_ptr = 0;
+ u8 *qc = NULL;
unsigned long flags;
int rc;
goto drop_unlock;
}
- if (!priv->interface_id) {
- IWL_DEBUG_DROP("Dropping - !priv->interface_id\n");
+ if (!priv->vif) {
+ IWL_DEBUG_DROP("Dropping - !priv->vif\n");
goto drop_unlock;
}
- if ((ctl->tx_rate & 0xFF) == IWL_INVALID_RATE) {
+ if ((ieee80211_get_tx_rate(priv->hw, info)->hw_value & 0xFF) == IWL_INVALID_RATE) {
IWL_ERROR("ERROR: No TX rate available.\n");
goto drop_unlock;
}
unicast = !is_multicast_ether_addr(hdr->addr1);
id = 0;
- fc = le16_to_cpu(hdr->frame_control);
+ fc = hdr->frame_control;
#ifdef CONFIG_IWL3945_DEBUG
if (ieee80211_is_auth(fc))
IWL_DEBUG_TX("Sending AUTH frame\n");
- else if (ieee80211_is_assoc_request(fc))
+ else if (ieee80211_is_assoc_req(fc))
IWL_DEBUG_TX("Sending ASSOC frame\n");
- else if (ieee80211_is_reassoc_request(fc))
+ else if (ieee80211_is_reassoc_req(fc))
IWL_DEBUG_TX("Sending REASSOC frame\n");
#endif
- if (!iwl3945_is_associated(priv) &&
- ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA)) {
+ /* drop all data frame if we are not associated */
+ if ((!iwl3945_is_associated(priv) ||
+ ((priv->iw_mode == IEEE80211_IF_TYPE_STA) && !priv->assoc_id)) &&
+ ieee80211_is_data(fc)) {
IWL_DEBUG_DROP("Dropping - !iwl3945_is_associated\n");
goto drop_unlock;
}
spin_unlock_irqrestore(&priv->lock, flags);
- hdr_len = ieee80211_get_hdrlen(fc);
+ hdr_len = ieee80211_get_hdrlen(le16_to_cpu(fc));
+
+ /* Find (or create) index into station table for destination station */
sta_id = iwl3945_get_sta_id(priv, hdr);
if (sta_id == IWL_INVALID_STATION) {
DECLARE_MAC_BUF(mac);
IWL_DEBUG_RATE("station Id %d\n", sta_id);
- qc = ieee80211_get_qos_ctrl(hdr);
- if (qc) {
- u8 tid = (u8)(le16_to_cpu(*qc) & 0xf);
+ if (ieee80211_is_data_qos(fc)) {
+ qc = ieee80211_get_qos_ctl(hdr);
+ tid = qc[0] & 0xf;
seq_number = priv->stations[sta_id].tid[tid].seq_number &
IEEE80211_SCTL_SEQ;
hdr->seq_ctrl = cpu_to_le16(seq_number) |
__constant_cpu_to_le16(IEEE80211_SCTL_FRAG));
seq_number += 0x10;
}
+
+ /* Descriptor for chosen Tx queue */
txq = &priv->txq[txq_id];
q = &txq->q;
spin_lock_irqsave(&priv->lock, flags);
+ /* Set up first empty TFD within this queue's circular TFD buffer */
tfd = &txq->bd[q->write_ptr];
memset(tfd, 0, sizeof(*tfd));
control_flags = (u32 *) tfd;
idx = get_cmd_index(q, q->write_ptr, 0);
+ /* Set up driver data for this TFD */
memset(&(txq->txb[q->write_ptr]), 0, sizeof(struct iwl3945_tx_info));
txq->txb[q->write_ptr].skb[0] = skb;
- memcpy(&(txq->txb[q->write_ptr].status.control),
- ctl, sizeof(struct ieee80211_tx_control));
+
+ /* Init first empty entry in queue's array of Tx/cmd buffers */
out_cmd = &txq->cmd[idx];
memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr));
memset(&out_cmd->cmd.tx, 0, sizeof(out_cmd->cmd.tx));
+
+ /*
+ * Set up the Tx-command (not MAC!) header.
+ * Store the chosen Tx queue and TFD index within the sequence field;
+ * after Tx, uCode's Tx response will return this value so driver can
+ * locate the frame within the tx queue and do post-tx processing.
+ */
out_cmd->hdr.cmd = REPLY_TX;
out_cmd->hdr.sequence = cpu_to_le16((u16)(QUEUE_TO_SEQ(txq_id) |
INDEX_TO_SEQ(q->write_ptr)));
- /* copy frags header */
+
+ /* Copy MAC header from skb into command buffer */
memcpy(out_cmd->cmd.tx.hdr, hdr, hdr_len);
- /* hdr = (struct ieee80211_hdr *)out_cmd->cmd.tx.hdr; */
+ /*
+ * Use the first empty entry in this queue's command buffer array
+ * to contain the Tx command and MAC header concatenated together
+ * (payload data will be in another buffer).
+ * Size of this varies, due to varying MAC header length.
+ * If end is not dword aligned, we'll have 2 extra bytes at the end
+ * of the MAC header (device reads on dword boundaries).
+ * We'll tell device about this padding later.
+ */
len = priv->hw_setting.tx_cmd_len +
sizeof(struct iwl3945_cmd_header) + hdr_len;
else
len_org = 0;
+ /* Physical address of this Tx command's header (not MAC header!),
+ * within command buffer array. */
txcmd_phys = txq->dma_addr_cmd + sizeof(struct iwl3945_cmd) * idx +
offsetof(struct iwl3945_cmd, hdr);
+ /* Add buffer containing Tx command and MAC(!) header to TFD's
+ * first entry */
iwl3945_hw_txq_attach_buf_to_tfd(priv, tfd, txcmd_phys, len);
- if (!(ctl->flags & IEEE80211_TXCTL_DO_NOT_ENCRYPT))
- iwl3945_build_tx_cmd_hwcrypto(priv, ctl, out_cmd, skb, 0);
+ if (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT))
+ iwl3945_build_tx_cmd_hwcrypto(priv, info, out_cmd, skb, 0);
- /* 802.11 null functions have no payload... */
+ /* Set up TFD's 2nd entry to point directly to remainder of skb,
+ * if any (802.11 null frames have no payload). */
len = skb->len - hdr_len;
if (len) {
phys_addr = pci_map_single(priv->pci_dev, skb->data + hdr_len,
iwl3945_hw_txq_attach_buf_to_tfd(priv, tfd, phys_addr, len);
}
- /* If there is no payload, then only one TFD is used */
if (!len)
+ /* If there is no payload, then we use only one Tx buffer */
*control_flags = TFD_CTL_COUNT_SET(1);
else
+ /* Else use 2 buffers.
+ * Tell 3945 about any padding after MAC header */
*control_flags = TFD_CTL_COUNT_SET(2) |
TFD_CTL_PAD_SET(U32_PAD(len));
+ /* Total # bytes to be transmitted */
len = (u16)skb->len;
out_cmd->cmd.tx.len = cpu_to_le16(len);
/* TODO need this for burst mode later on */
- iwl3945_build_tx_cmd_basic(priv, out_cmd, ctl, hdr, unicast, sta_id);
+ iwl3945_build_tx_cmd_basic(priv, out_cmd, info, hdr, unicast, sta_id);
/* set is_hcca to 0; it probably will never be implemented */
- iwl3945_hw_build_tx_cmd_rate(priv, out_cmd, ctl, hdr, sta_id, 0);
+ iwl3945_hw_build_tx_cmd_rate(priv, out_cmd, info, hdr, sta_id, 0);
out_cmd->cmd.tx.tx_flags &= ~TX_CMD_FLG_ANT_A_MSK;
out_cmd->cmd.tx.tx_flags &= ~TX_CMD_FLG_ANT_B_MSK;
- if (!ieee80211_get_morefrag(hdr)) {
+ if (!ieee80211_has_morefrags(hdr->frame_control)) {
txq->need_update = 1;
if (qc) {
- u8 tid = (u8)(le16_to_cpu(*qc) & 0xf);
priv->stations[sta_id].tid[tid].seq_number = seq_number;
}
} else {
sizeof(out_cmd->cmd.tx));
iwl3945_print_hex_dump(IWL_DL_TX, (u8 *)out_cmd->cmd.tx.hdr,
- ieee80211_get_hdrlen(fc));
+ ieee80211_get_hdrlen(le16_to_cpu(fc)));
- q->write_ptr = iwl3945_queue_inc_wrap(q->write_ptr, q->n_bd);
+ /* Tell device the write index *just past* this latest filled TFD */
+ q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd);
rc = iwl3945_tx_queue_update_write_ptr(priv, txq);
spin_unlock_irqrestore(&priv->lock, flags);
spin_unlock_irqrestore(&priv->lock, flags);
}
- ieee80211_stop_queue(priv->hw, ctl->queue);
+ ieee80211_stop_queue(priv->hw, skb_get_queue_mapping(skb));
}
return 0;
static void iwl3945_set_rate(struct iwl3945_priv *priv)
{
- const struct ieee80211_hw_mode *hw = NULL;
+ const struct ieee80211_supported_band *sband = NULL;
struct ieee80211_rate *rate;
int i;
- hw = iwl3945_get_hw_mode(priv, priv->phymode);
- if (!hw) {
+ sband = iwl3945_get_band(priv, priv->band);
+ if (!sband) {
IWL_ERROR("Failed to set rate: unable to get hw mode\n");
return;
}
priv->active_rate = 0;
priv->active_rate_basic = 0;
- IWL_DEBUG_RATE("Setting rates for 802.11%c\n",
- hw->mode == MODE_IEEE80211A ?
- 'a' : ((hw->mode == MODE_IEEE80211B) ? 'b' : 'g'));
-
- for (i = 0; i < hw->num_rates; i++) {
- rate = &(hw->rates[i]);
- if ((rate->val < IWL_RATE_COUNT) &&
- (rate->flags & IEEE80211_RATE_SUPPORTED)) {
- IWL_DEBUG_RATE("Adding rate index %d (plcp %d)%s\n",
- rate->val, iwl3945_rates[rate->val].plcp,
- (rate->flags & IEEE80211_RATE_BASIC) ?
- "*" : "");
- priv->active_rate |= (1 << rate->val);
- if (rate->flags & IEEE80211_RATE_BASIC)
- priv->active_rate_basic |= (1 << rate->val);
- } else
- IWL_DEBUG_RATE("Not adding rate %d (plcp %d)\n",
- rate->val, iwl3945_rates[rate->val].plcp);
+ IWL_DEBUG_RATE("Setting rates for %s GHz\n",
+ sband->band == IEEE80211_BAND_2GHZ ? "2.4" : "5");
+
+ for (i = 0; i < sband->n_bitrates; i++) {
+ rate = &sband->bitrates[i];
+ if ((rate->hw_value < IWL_RATE_COUNT) &&
+ !(rate->flags & IEEE80211_CHAN_DISABLED)) {
+ IWL_DEBUG_RATE("Adding rate index %d (plcp %d)\n",
+ rate->hw_value, iwl3945_rates[rate->hw_value].plcp);
+ priv->active_rate |= (1 << rate->hw_value);
+ }
}
IWL_DEBUG_RATE("Set active_rate = %0x, active_rate_basic = %0x\n",
return;
}
- queue_work(priv->workqueue, &priv->restart);
+ if (priv->is_open)
+ queue_work(priv->workqueue, &priv->restart);
return;
}
}
}
-void iwl3945_handle_data_packet_monitor(struct iwl3945_priv *priv,
- struct iwl3945_rx_mem_buffer *rxb,
- void *data, short len,
- struct ieee80211_rx_status *stats,
- u16 phy_flags)
-{
- struct iwl3945_rt_rx_hdr *iwl3945_rt;
-
- /* First cache any information we need before we overwrite
- * the information provided in the skb from the hardware */
- s8 signal = stats->ssi;
- s8 noise = 0;
- int rate = stats->rate;
- u64 tsf = stats->mactime;
- __le16 phy_flags_hw = cpu_to_le16(phy_flags);
-
- /* We received data from the HW, so stop the watchdog */
- if (len > IWL_RX_BUF_SIZE - sizeof(*iwl3945_rt)) {
- IWL_DEBUG_DROP("Dropping too large packet in monitor\n");
- return;
- }
-
- /* copy the frame data to write after where the radiotap header goes */
- iwl3945_rt = (void *)rxb->skb->data;
- memmove(iwl3945_rt->payload, data, len);
-
- iwl3945_rt->rt_hdr.it_version = PKTHDR_RADIOTAP_VERSION;
- iwl3945_rt->rt_hdr.it_pad = 0; /* always good to zero */
-
- /* total header + data */
- iwl3945_rt->rt_hdr.it_len = cpu_to_le16(sizeof(*iwl3945_rt));
-
- /* Set the size of the skb to the size of the frame */
- skb_put(rxb->skb, sizeof(*iwl3945_rt) + len);
-
- /* Big bitfield of all the fields we provide in radiotap */
- iwl3945_rt->rt_hdr.it_present =
- cpu_to_le32((1 << IEEE80211_RADIOTAP_TSFT) |
- (1 << IEEE80211_RADIOTAP_FLAGS) |
- (1 << IEEE80211_RADIOTAP_RATE) |
- (1 << IEEE80211_RADIOTAP_CHANNEL) |
- (1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL) |
- (1 << IEEE80211_RADIOTAP_DBM_ANTNOISE) |
- (1 << IEEE80211_RADIOTAP_ANTENNA));
-
- /* Zero the flags, we'll add to them as we go */
- iwl3945_rt->rt_flags = 0;
-
- iwl3945_rt->rt_tsf = cpu_to_le64(tsf);
-
- /* Convert to dBm */
- iwl3945_rt->rt_dbmsignal = signal;
- iwl3945_rt->rt_dbmnoise = noise;
-
- /* Convert the channel frequency and set the flags */
- iwl3945_rt->rt_channelMHz = cpu_to_le16(stats->freq);
- if (!(phy_flags_hw & RX_RES_PHY_FLAGS_BAND_24_MSK))
- iwl3945_rt->rt_chbitmask =
- cpu_to_le16((IEEE80211_CHAN_OFDM | IEEE80211_CHAN_5GHZ));
- else if (phy_flags_hw & RX_RES_PHY_FLAGS_MOD_CCK_MSK)
- iwl3945_rt->rt_chbitmask =
- cpu_to_le16((IEEE80211_CHAN_CCK | IEEE80211_CHAN_2GHZ));
- else /* 802.11g */
- iwl3945_rt->rt_chbitmask =
- cpu_to_le16((IEEE80211_CHAN_OFDM | IEEE80211_CHAN_2GHZ));
-
- rate = iwl3945_rate_index_from_plcp(rate);
- if (rate == -1)
- iwl3945_rt->rt_rate = 0;
- else
- iwl3945_rt->rt_rate = iwl3945_rates[rate].ieee;
-
- /* antenna number */
- iwl3945_rt->rt_antenna =
- le16_to_cpu(phy_flags_hw & RX_RES_PHY_FLAGS_ANTENNA_MSK) >> 4;
-
- /* set the preamble flag if we have it */
- if (phy_flags_hw & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK)
- iwl3945_rt->rt_flags |= IEEE80211_RADIOTAP_F_SHORTPRE;
-
- IWL_DEBUG_RX("Rx packet of %d bytes.\n", rxb->skb->len);
-
- stats->flag |= RX_FLAG_RADIOTAP;
- ieee80211_rx_irqsafe(priv->hw, rxb->skb, stats);
- rxb->skb = NULL;
-}
-
-
#define IWL_PACKET_RETRY_TIME HZ
int iwl3945_is_duplicate_packet(struct iwl3945_priv *priv, struct ieee80211_hdr *header)
}
#endif
-static void iwl3945_txstatus_to_ieee(struct iwl3945_priv *priv,
- struct iwl3945_tx_info *tx_sta)
-{
-
- tx_sta->status.ack_signal = 0;
- tx_sta->status.excessive_retries = 0;
- tx_sta->status.queue_length = 0;
- tx_sta->status.queue_number = 0;
-
- if (in_interrupt())
- ieee80211_tx_status_irqsafe(priv->hw,
- tx_sta->skb[0], &(tx_sta->status));
- else
- ieee80211_tx_status(priv->hw,
- tx_sta->skb[0], &(tx_sta->status));
-
- tx_sta->skb[0] = NULL;
-}
-
-/**
- * iwl3945_tx_queue_reclaim - Reclaim Tx queue entries no more used by NIC.
- *
- * When FW advances 'R' index, all entries between old and
- * new 'R' index need to be reclaimed. As result, some free space
- * forms. If there is enough free space (> low mark), wake Tx queue.
- */
-static int iwl3945_tx_queue_reclaim(struct iwl3945_priv *priv, int txq_id, int index)
-{
- struct iwl3945_tx_queue *txq = &priv->txq[txq_id];
- struct iwl3945_queue *q = &txq->q;
- int nfreed = 0;
-
- if ((index >= q->n_bd) || (x2_queue_used(q, index) == 0)) {
- IWL_ERROR("Read index for DMA queue txq id (%d), index %d, "
- "is out of range [0-%d] %d %d.\n", txq_id,
- index, q->n_bd, q->write_ptr, q->read_ptr);
- return 0;
- }
-
- for (index = iwl3945_queue_inc_wrap(index, q->n_bd);
- q->read_ptr != index;
- q->read_ptr = iwl3945_queue_inc_wrap(q->read_ptr, q->n_bd)) {
- if (txq_id != IWL_CMD_QUEUE_NUM) {
- iwl3945_txstatus_to_ieee(priv,
- &(txq->txb[txq->q.read_ptr]));
- iwl3945_hw_txq_free_tfd(priv, txq);
- } else if (nfreed > 1) {
- IWL_ERROR("HCMD skipped: index (%d) %d %d\n", index,
- q->write_ptr, q->read_ptr);
- queue_work(priv->workqueue, &priv->restart);
- }
- nfreed++;
- }
-
- if (iwl3945_queue_space(q) > q->low_mark && (txq_id >= 0) &&
- (txq_id != IWL_CMD_QUEUE_NUM) &&
- priv->mac80211_registered)
- ieee80211_wake_queue(priv->hw, txq_id);
-
-
- return nfreed;
-}
-
-static int iwl3945_is_tx_success(u32 status)
-{
- return (status & 0xFF) == 0x1;
-}
-
-/******************************************************************************
- *
- * Generic RX handler implementations
- *
- ******************************************************************************/
-static void iwl3945_rx_reply_tx(struct iwl3945_priv *priv,
- struct iwl3945_rx_mem_buffer *rxb)
-{
- struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
- u16 sequence = le16_to_cpu(pkt->hdr.sequence);
- int txq_id = SEQ_TO_QUEUE(sequence);
- int index = SEQ_TO_INDEX(sequence);
- struct iwl3945_tx_queue *txq = &priv->txq[txq_id];
- struct ieee80211_tx_status *tx_status;
- struct iwl3945_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
- u32 status = le32_to_cpu(tx_resp->status);
-
- if ((index >= txq->q.n_bd) || (x2_queue_used(&txq->q, index) == 0)) {
- IWL_ERROR("Read index for DMA queue txq_id (%d) index %d "
- "is out of range [0-%d] %d %d\n", txq_id,
- index, txq->q.n_bd, txq->q.write_ptr,
- txq->q.read_ptr);
- return;
- }
-
- tx_status = &(txq->txb[txq->q.read_ptr].status);
-
- tx_status->retry_count = tx_resp->failure_frame;
- tx_status->queue_number = status;
- tx_status->queue_length = tx_resp->bt_kill_count;
- tx_status->queue_length |= tx_resp->failure_rts;
-
- tx_status->flags =
- iwl3945_is_tx_success(status) ? IEEE80211_TX_STATUS_ACK : 0;
-
- tx_status->control.tx_rate = iwl3945_rate_index_from_plcp(tx_resp->rate);
-
- IWL_DEBUG_TX("Tx queue %d Status %s (0x%08x) plcp rate %d retries %d\n",
- txq_id, iwl3945_get_tx_fail_reason(status), status,
- tx_resp->rate, tx_resp->failure_frame);
-
- IWL_DEBUG_TX_REPLY("Tx queue reclaim %d\n", index);
- if (index != -1)
- iwl3945_tx_queue_reclaim(priv, txq_id, index);
-
- if (iwl_check_bits(status, TX_ABORT_REQUIRED_MSK))
- IWL_ERROR("TODO: Implement Tx ABORT REQUIRED!!!\n");
-}
-
-
static void iwl3945_rx_reply_alive(struct iwl3945_priv *priv,
struct iwl3945_rx_mem_buffer *rxb)
{
struct sk_buff *beacon;
/* Pull updated AP beacon from mac80211. will fail if not in AP mode */
- beacon = ieee80211_beacon_get(priv->hw, priv->interface_id, NULL);
+ beacon = ieee80211_beacon_get(priv->hw, priv->vif);
if (!beacon) {
IWL_ERROR("update beacon failed\n");
(priv->last_scan_jiffies, jiffies)));
priv->last_scan_jiffies = jiffies;
+ priv->next_scan_jiffies = 0;
}
/* Service SCAN_COMPLETE_NOTIFICATION (0x84) */
}
priv->last_scan_jiffies = jiffies;
+ priv->next_scan_jiffies = 0;
IWL_DEBUG_INFO("Setting scan to off\n");
clear_bit(STATUS_SCANNING, &priv->status);
priv->rx_handlers[SCAN_COMPLETE_NOTIFICATION] =
iwl3945_rx_scan_complete_notif;
priv->rx_handlers[CARD_STATE_NOTIFICATION] = iwl3945_rx_card_state_notif;
- priv->rx_handlers[REPLY_TX] = iwl3945_rx_reply_tx;
/* Set up hardware specific Rx handlers */
iwl3945_hw_rx_handler_setup(priv);
}
/**
+ * iwl3945_cmd_queue_reclaim - Reclaim CMD queue entries
+ * When FW advances 'R' index, all entries between old and new 'R' index
+ * need to be reclaimed.
+ */
+static void iwl3945_cmd_queue_reclaim(struct iwl3945_priv *priv,
+ int txq_id, int index)
+{
+ struct iwl3945_tx_queue *txq = &priv->txq[txq_id];
+ struct iwl3945_queue *q = &txq->q;
+ int nfreed = 0;
+
+ if ((index >= q->n_bd) || (iwl3945_x2_queue_used(q, index) == 0)) {
+ IWL_ERROR("Read index for DMA queue txq id (%d), index %d, "
+ "is out of range [0-%d] %d %d.\n", txq_id,
+ index, q->n_bd, q->write_ptr, q->read_ptr);
+ return;
+ }
+
+ for (index = iwl_queue_inc_wrap(index, q->n_bd); q->read_ptr != index;
+ q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd)) {
+ if (nfreed > 1) {
+ IWL_ERROR("HCMD skipped: index (%d) %d %d\n", index,
+ q->write_ptr, q->read_ptr);
+ queue_work(priv->workqueue, &priv->restart);
+ break;
+ }
+ nfreed++;
+ }
+}
+
+
+/**
* iwl3945_tx_cmd_complete - Pull unused buffers off the queue and reclaim them
* @rxb: Rx buffer to reclaim
*
int cmd_index;
struct iwl3945_cmd *cmd;
- /* If a Tx command is being handled and it isn't in the actual
- * command queue then there a command routing bug has been introduced
- * in the queue management code. */
- if (txq_id != IWL_CMD_QUEUE_NUM)
- IWL_ERROR("Error wrong command queue %d command id 0x%X\n",
- txq_id, pkt->hdr.cmd);
BUG_ON(txq_id != IWL_CMD_QUEUE_NUM);
cmd_index = get_cmd_index(&priv->txq[IWL_CMD_QUEUE_NUM].q, index, huge);
!cmd->meta.u.callback(priv, cmd, rxb->skb))
rxb->skb = NULL;
- iwl3945_tx_queue_reclaim(priv, txq_id, index);
+ iwl3945_cmd_queue_reclaim(priv, txq_id, index);
if (!(cmd->meta.flags & CMD_ASYNC)) {
clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
if (q->need_update == 0)
goto exit_unlock;
+ /* If power-saving is in use, make sure device is awake */
if (test_bit(STATUS_POWER_PMI, &priv->status)) {
reg = iwl3945_read32(priv, CSR_UCODE_DRV_GP1);
if (rc)
goto exit_unlock;
+ /* Device expects a multiple of 8 */
iwl3945_write_direct32(priv, FH_RSCSR_CHNL0_WPTR,
q->write & ~0x7);
iwl3945_release_nic_access(priv);
+
+ /* Else device is assumed to be awake */
} else
+ /* Device expects a multiple of 8 */
iwl3945_write32(priv, FH_RSCSR_CHNL0_WPTR, q->write & ~0x7);
spin_lock_irqsave(&rxq->lock, flags);
write = rxq->write & ~0x7;
while ((iwl3945_rx_queue_space(rxq) > 0) && (rxq->free_count)) {
+ /* Get next free Rx buffer, remove from free list */
element = rxq->rx_free.next;
rxb = list_entry(element, struct iwl3945_rx_mem_buffer, list);
list_del(element);
+
+ /* Point to Rx buffer via next RBD in circular buffer */
rxq->bd[rxq->write] = iwl3945_dma_addr2rbd_ptr(priv, rxb->dma_addr);
rxq->queue[rxq->write] = rxb;
rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
queue_work(priv->workqueue, &priv->rx_replenish);
- /* If we've added more space for the firmware to place data, tell it */
+ /* If we've added more space for the firmware to place data, tell it.
+ * Increment device's write pointer in multiples of 8. */
if ((write != (rxq->write & ~0x7))
|| (abs(rxq->write - rxq->read) > 7)) {
spin_lock_irqsave(&rxq->lock, flags);
* Also restock the Rx queue via iwl3945_rx_queue_restock.
* This is called as a scheduled work item (except for during initialization)
*/
-void iwl3945_rx_replenish(void *data)
+static void iwl3945_rx_allocate(struct iwl3945_priv *priv)
{
- struct iwl3945_priv *priv = data;
struct iwl3945_rx_queue *rxq = &priv->rxq;
struct list_head *element;
struct iwl3945_rx_mem_buffer *rxb;
while (!list_empty(&rxq->rx_used)) {
element = rxq->rx_used.next;
rxb = list_entry(element, struct iwl3945_rx_mem_buffer, list);
+
+ /* Alloc a new receive buffer */
rxb->skb =
alloc_skb(IWL_RX_BUF_SIZE, __GFP_NOWARN | GFP_ATOMIC);
if (!rxb->skb) {
* more buffers it will schedule replenish */
break;
}
+
+ /* If radiotap head is required, reserve some headroom here.
+ * The physical head count is a variable rx_stats->phy_count.
+ * We reserve 4 bytes here. Plus these extra bytes, the
+ * headroom of the physical head should be enough for the
+ * radiotap head that iwl3945 supported. See iwl3945_rt.
+ */
+ skb_reserve(rxb->skb, 4);
+
priv->alloc_rxb_skb++;
list_del(element);
+
+ /* Get physical address of RB/SKB */
rxb->dma_addr =
pci_map_single(priv->pci_dev, rxb->skb->data,
IWL_RX_BUF_SIZE, PCI_DMA_FROMDEVICE);
rxq->free_count++;
}
spin_unlock_irqrestore(&rxq->lock, flags);
-
- spin_lock_irqsave(&priv->lock, flags);
- iwl3945_rx_queue_restock(priv);
- spin_unlock_irqrestore(&priv->lock, flags);
}
-/* Assumes that the skb field of the buffers in 'pool' is kept accurate.
- * If an SKB has been detached, the POOL needs to have its SKB set to NULL
- * This free routine walks the list of POOL entries and if SKB is set to
- * non NULL it is unmapped and freed
+/*
+ * this should be called while priv->lock is locked
*/
-static void iwl3945_rx_queue_free(struct iwl3945_priv *priv, struct iwl3945_rx_queue *rxq)
+static void __iwl3945_rx_replenish(void *data)
{
- int i;
+ struct iwl3945_priv *priv = data;
+
+ iwl3945_rx_allocate(priv);
+ iwl3945_rx_queue_restock(priv);
+}
+
+
+void iwl3945_rx_replenish(void *data)
+{
+ struct iwl3945_priv *priv = data;
+ unsigned long flags;
+
+ iwl3945_rx_allocate(priv);
+
+ spin_lock_irqsave(&priv->lock, flags);
+ iwl3945_rx_queue_restock(priv);
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+/* Assumes that the skb field of the buffers in 'pool' is kept accurate.
+ * If an SKB has been detached, the POOL needs to have its SKB set to NULL
+ * This free routine walks the list of POOL entries and if SKB is set to
+ * non NULL it is unmapped and freed
+ */
+static void iwl3945_rx_queue_free(struct iwl3945_priv *priv, struct iwl3945_rx_queue *rxq)
+{
+ int i;
for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
if (rxq->pool[i].skb != NULL) {
pci_unmap_single(priv->pci_dev,
spin_lock_init(&rxq->lock);
INIT_LIST_HEAD(&rxq->rx_free);
INIT_LIST_HEAD(&rxq->rx_used);
+
+ /* Alloc the circular buffer of Read Buffer Descriptors (RBDs) */
rxq->bd = pci_alloc_consistent(dev, 4 * RX_QUEUE_SIZE, &rxq->dma_addr);
if (!rxq->bd)
return -ENOMEM;
+
/* Fill the rx_used queue with _all_ of the Rx buffers */
for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++)
list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
+
/* Set us so that we have processed and used all buffers, but have
* not restocked the Rx queue with fresh buffers */
rxq->read = rxq->write = 0;
* Conversion assumes that levels are voltages (20*log), not powers (10*log). */
int iwl3945_calc_db_from_ratio(int sig_ratio)
{
- /* Anything above 1000:1 just report as 60 dB */
- if (sig_ratio > 1000)
+ /* 1000:1 or higher just report as 60 dB */
+ if (sig_ratio >= 1000)
return 60;
- /* Above 100:1, divide by 10 and use table,
+ /* 100:1 or higher, divide by 10 and use table,
* add 20 dB to make up for divide by 10 */
- if (sig_ratio > 100)
+ if (sig_ratio >= 100)
return (20 + (int)ratio2dB[sig_ratio/10]);
/* We shouldn't see this */
u32 r, i;
int reclaim;
unsigned long flags;
+ u8 fill_rx = 0;
+ u32 count = 8;
+ /* uCode's read index (stored in shared DRAM) indicates the last Rx
+ * buffer that the driver may process (last buffer filled by ucode). */
r = iwl3945_hw_get_rx_read(priv);
i = rxq->read;
+ if (iwl3945_rx_queue_space(rxq) > (RX_QUEUE_SIZE / 2))
+ fill_rx = 1;
/* Rx interrupt, but nothing sent from uCode */
if (i == r)
IWL_DEBUG(IWL_DL_RX | IWL_DL_ISR, "r = %d, i = %d\n", r, i);
list_add_tail(&rxb->list, &priv->rxq.rx_used);
spin_unlock_irqrestore(&rxq->lock, flags);
i = (i + 1) & RX_QUEUE_MASK;
+ /* If there are a lot of unused frames,
+ * restock the Rx queue so ucode won't assert. */
+ if (fill_rx) {
+ count++;
+ if (count >= 8) {
+ priv->rxq.read = i;
+ __iwl3945_rx_replenish(priv);
+ count = 0;
+ }
+ }
}
/* Backtrack one entry */
iwl3945_rx_queue_restock(priv);
}
+/**
+ * iwl3945_tx_queue_update_write_ptr - Send new write index to hardware
+ */
static int iwl3945_tx_queue_update_write_ptr(struct iwl3945_priv *priv,
struct iwl3945_tx_queue *txq)
{
iwl3945_write32(priv, CSR_INT_MASK, CSR_INI_SET_MASK);
}
+
+/* call this function to flush any scheduled tasklet */
+static inline void iwl_synchronize_irq(struct iwl3945_priv *priv)
+{
+ /* wait to make sure we flush pedding tasklet*/
+ synchronize_irq(priv->pci_dev->irq);
+ tasklet_kill(&priv->irq_tasklet);
+}
+
+
static inline void iwl3945_disable_interrupts(struct iwl3945_priv *priv)
{
clear_bit(STATUS_INT_ENABLED, &priv->status);
if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
IWL_ERROR("Start IWL Error Log Dump:\n");
- IWL_ERROR("Status: 0x%08lX, Config: %08X count: %d\n",
- priv->status, priv->config, count);
+ IWL_ERROR("Status: 0x%08lX, count: %d\n", priv->status, count);
}
IWL_ERROR("Desc Time asrtPC blink2 "
* atomic, make sure that inta covers all the interrupts that
* we've discovered, even if FH interrupt came in just after
* reading CSR_INT. */
- if (inta_fh & CSR_FH_INT_RX_MASK)
+ if (inta_fh & CSR39_FH_INT_RX_MASK)
inta |= CSR_INT_BIT_FH_RX;
- if (inta_fh & CSR_FH_INT_TX_MASK)
+ if (inta_fh & CSR39_FH_INT_TX_MASK)
inta |= CSR_INT_BIT_FH_TX;
/* Now service all interrupt bits discovered above. */
#ifdef CONFIG_IWL3945_DEBUG
if (iwl3945_debug_level & (IWL_DL_ISR)) {
/* NIC fires this, but we don't use it, redundant with WAKEUP */
- if (inta & CSR_INT_BIT_MAC_CLK_ACTV)
- IWL_DEBUG_ISR("Microcode started or stopped.\n");
+ if (inta & CSR_INT_BIT_SCD)
+ IWL_DEBUG_ISR("Scheduler finished to transmit "
+ "the frame/frames.\n");
/* Alive notification via Rx interrupt will do the real work */
if (inta & CSR_INT_BIT_ALIVE)
}
#endif
/* Safely ignore these bits for debug checks below */
- inta &= ~(CSR_INT_BIT_MAC_CLK_ACTV | CSR_INT_BIT_ALIVE);
+ inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
/* HW RF KILL switch toggled (4965 only) */
if (inta & CSR_INT_BIT_RF_KILL) {
/* Queue restart only if RF_KILL switch was set to "kill"
* when we loaded driver, and is now set to "enable".
* After we're Alive, RF_KILL gets handled by
- * iwl_rx_card_state_notif() */
+ * iwl3945_rx_card_state_notif() */
if (!hw_rf_kill && !test_bit(STATUS_ALIVE, &priv->status)) {
clear_bit(STATUS_RF_KILL_HW, &priv->status);
queue_work(priv->workqueue, &priv->restart);
}
/* Re-enable all interrupts */
- iwl3945_enable_interrupts(priv);
+ /* only Re-enable if disabled by irq */
+ if (test_bit(STATUS_INT_ENABLED, &priv->status))
+ iwl3945_enable_interrupts(priv);
#ifdef CONFIG_IWL3945_DEBUG
if (iwl3945_debug_level & (IWL_DL_ISR)) {
IWL_DEBUG_ISR("ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
inta, inta_mask, inta_fh);
+ inta &= ~CSR_INT_BIT_SCD;
+
/* iwl3945_irq_tasklet() will service interrupts and re-enable them */
- tasklet_schedule(&priv->irq_tasklet);
+ if (likely(inta || inta_fh))
+ tasklet_schedule(&priv->irq_tasklet);
unplugged:
spin_unlock(&priv->lock);
none:
/* re-enable interrupts here since we don't have anything to service. */
- iwl3945_enable_interrupts(priv);
+ /* only Re-enable if disabled by irq */
+ if (test_bit(STATUS_INT_ENABLED, &priv->status))
+ iwl3945_enable_interrupts(priv);
spin_unlock(&priv->lock);
return IRQ_NONE;
}
}
}
+/**
+ * iwl3945_get_channel_info - Find driver's private channel info
+ *
+ * Based on band and channel number.
+ */
const struct iwl3945_channel_info *iwl3945_get_channel_info(const struct iwl3945_priv *priv,
- int phymode, u16 channel)
+ enum ieee80211_band band, u16 channel)
{
int i;
- switch (phymode) {
- case MODE_IEEE80211A:
+ switch (band) {
+ case IEEE80211_BAND_5GHZ:
for (i = 14; i < priv->channel_count; i++) {
if (priv->channel_info[i].channel == channel)
return &priv->channel_info[i];
}
break;
- case MODE_IEEE80211B:
- case MODE_IEEE80211G:
+ case IEEE80211_BAND_2GHZ:
if (channel >= 1 && channel <= 14)
return &priv->channel_info[channel - 1];
break;
-
+ case IEEE80211_NUM_BANDS:
+ WARN_ON(1);
}
return NULL;
#define CHECK_AND_PRINT(x) ((eeprom_ch_info[ch].flags & EEPROM_CHANNEL_##x) \
? # x " " : "")
+/**
+ * iwl3945_init_channel_map - Set up driver's info for all possible channels
+ */
static int iwl3945_init_channel_map(struct iwl3945_priv *priv)
{
int eeprom_ch_count = 0;
/* Loop through each band adding each of the channels */
for (ch = 0; ch < eeprom_ch_count; ch++) {
ch_info->channel = eeprom_ch_index[ch];
- ch_info->phymode = (band == 1) ? MODE_IEEE80211B :
- MODE_IEEE80211A;
+ ch_info->band = (band == 1) ? IEEE80211_BAND_2GHZ :
+ IEEE80211_BAND_5GHZ;
/* permanently store EEPROM's channel regulatory flags
* and max power in channel info database. */
ch_info->channel,
is_channel_a_band(ch_info) ?
"5.2" : "2.4",
+ CHECK_AND_PRINT(VALID),
CHECK_AND_PRINT(IBSS),
CHECK_AND_PRINT(ACTIVE),
CHECK_AND_PRINT(RADAR),
CHECK_AND_PRINT(WIDE),
- CHECK_AND_PRINT(NARROW),
CHECK_AND_PRINT(DFS),
eeprom_ch_info[ch].flags,
eeprom_ch_info[ch].max_power_avg,
}
}
+ /* Set up txpower settings in driver for all channels */
if (iwl3945_txpower_set_from_eeprom(priv))
return -EIO;
return 0;
}
+/*
+ * iwl3945_free_channel_map - undo allocations in iwl3945_init_channel_map
+ */
+static void iwl3945_free_channel_map(struct iwl3945_priv *priv)
+{
+ kfree(priv->channel_info);
+ priv->channel_count = 0;
+}
+
/* For active scan, listen ACTIVE_DWELL_TIME (msec) on each channel after
* sending probe req. This should be set long enough to hear probe responses
* from more than one AP. */
#define IWL_PASSIVE_DWELL_BASE (100)
#define IWL_CHANNEL_TUNE_TIME 5
-static inline u16 iwl3945_get_active_dwell_time(struct iwl3945_priv *priv, int phymode)
+static inline u16 iwl3945_get_active_dwell_time(struct iwl3945_priv *priv,
+ enum ieee80211_band band)
{
- if (phymode == MODE_IEEE80211A)
+ if (band == IEEE80211_BAND_5GHZ)
return IWL_ACTIVE_DWELL_TIME_52;
else
return IWL_ACTIVE_DWELL_TIME_24;
}
-static u16 iwl3945_get_passive_dwell_time(struct iwl3945_priv *priv, int phymode)
+static u16 iwl3945_get_passive_dwell_time(struct iwl3945_priv *priv,
+ enum ieee80211_band band)
{
- u16 active = iwl3945_get_active_dwell_time(priv, phymode);
- u16 passive = (phymode != MODE_IEEE80211A) ?
+ u16 active = iwl3945_get_active_dwell_time(priv, band);
+ u16 passive = (band == IEEE80211_BAND_2GHZ) ?
IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_24 :
IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_52;
return passive;
}
-static int iwl3945_get_channels_for_scan(struct iwl3945_priv *priv, int phymode,
+static int iwl3945_get_channels_for_scan(struct iwl3945_priv *priv,
+ enum ieee80211_band band,
u8 is_active, u8 direct_mask,
struct iwl3945_scan_channel *scan_ch)
{
const struct ieee80211_channel *channels = NULL;
- const struct ieee80211_hw_mode *hw_mode;
+ const struct ieee80211_supported_band *sband;
const struct iwl3945_channel_info *ch_info;
u16 passive_dwell = 0;
u16 active_dwell = 0;
int added, i;
- hw_mode = iwl3945_get_hw_mode(priv, phymode);
- if (!hw_mode)
+ sband = iwl3945_get_band(priv, band);
+ if (!sband)
return 0;
- channels = hw_mode->channels;
+ channels = sband->channels;
- active_dwell = iwl3945_get_active_dwell_time(priv, phymode);
- passive_dwell = iwl3945_get_passive_dwell_time(priv, phymode);
+ active_dwell = iwl3945_get_active_dwell_time(priv, band);
+ passive_dwell = iwl3945_get_passive_dwell_time(priv, band);
- for (i = 0, added = 0; i < hw_mode->num_channels; i++) {
- if (channels[i].chan ==
- le16_to_cpu(priv->active_rxon.channel)) {
- if (iwl3945_is_associated(priv)) {
- IWL_DEBUG_SCAN
- ("Skipping current channel %d\n",
- le16_to_cpu(priv->active_rxon.channel));
- continue;
- }
- } else if (priv->only_active_channel)
+ for (i = 0, added = 0; i < sband->n_channels; i++) {
+ if (channels[i].flags & IEEE80211_CHAN_DISABLED)
continue;
- scan_ch->channel = channels[i].chan;
+ scan_ch->channel = channels[i].hw_value;
- ch_info = iwl3945_get_channel_info(priv, phymode, scan_ch->channel);
+ ch_info = iwl3945_get_channel_info(priv, band, scan_ch->channel);
if (!is_channel_valid(ch_info)) {
IWL_DEBUG_SCAN("Channel %d is INVALID for this SKU.\n",
scan_ch->channel);
}
if (!is_active || is_channel_passive(ch_info) ||
- !(channels[i].flag & IEEE80211_CHAN_W_ACTIVE_SCAN))
+ (channels[i].flags & IEEE80211_CHAN_PASSIVE_SCAN))
scan_ch->type = 0; /* passive */
else
scan_ch->type = 1; /* active */
if (scan_ch->type & 1)
scan_ch->type |= (direct_mask << 1);
- if (is_channel_narrow(ch_info))
- scan_ch->type |= (1 << 7);
-
scan_ch->active_dwell = cpu_to_le16(active_dwell);
scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
/* scan_pwr_info->tpc.dsp_atten; */
/*scan_pwr_info->tpc.tx_gain; */
- if (phymode == MODE_IEEE80211A)
+ if (band == IEEE80211_BAND_5GHZ)
scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3;
else {
scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3));
/* NOTE: if we were doing 6Mb OFDM for scans we'd use
* power level:
- * scan_ch->tpc.tx_gain = ((1<<5) | (2 << 3)) | 3;
+ * scan_ch->tpc.tx_gain = ((1 << 5) | (2 << 3)) | 3;
*/
}
return added;
}
-static void iwl3945_reset_channel_flag(struct iwl3945_priv *priv)
-{
- int i, j;
- for (i = 0; i < 3; i++) {
- struct ieee80211_hw_mode *hw_mode = (void *)&priv->modes[i];
- for (j = 0; j < hw_mode->num_channels; j++)
- hw_mode->channels[j].flag = hw_mode->channels[j].val;
- }
-}
-
static void iwl3945_init_hw_rates(struct iwl3945_priv *priv,
struct ieee80211_rate *rates)
{
int i;
for (i = 0; i < IWL_RATE_COUNT; i++) {
- rates[i].rate = iwl3945_rates[i].ieee * 5;
- rates[i].val = i; /* Rate scaling will work on indexes */
- rates[i].val2 = i;
- rates[i].flags = IEEE80211_RATE_SUPPORTED;
- /* Only OFDM have the bits-per-symbol set */
- if ((i <= IWL_LAST_OFDM_RATE) && (i >= IWL_FIRST_OFDM_RATE))
- rates[i].flags |= IEEE80211_RATE_OFDM;
- else {
+ rates[i].bitrate = iwl3945_rates[i].ieee * 5;
+ rates[i].hw_value = i; /* Rate scaling will work on indexes */
+ rates[i].hw_value_short = i;
+ rates[i].flags = 0;
+ if ((i > IWL_LAST_OFDM_RATE) || (i < IWL_FIRST_OFDM_RATE)) {
/*
- * If CCK 1M then set rate flag to CCK else CCK_2
- * which is CCK | PREAMBLE2
+ * If CCK != 1M then set short preamble rate flag.
*/
rates[i].flags |= (iwl3945_rates[i].plcp == 10) ?
- IEEE80211_RATE_CCK : IEEE80211_RATE_CCK_2;
+ 0 : IEEE80211_RATE_SHORT_PREAMBLE;
}
-
- /* Set up which ones are basic rates... */
- if (IWL_BASIC_RATES_MASK & (1 << i))
- rates[i].flags |= IEEE80211_RATE_BASIC;
}
}
static int iwl3945_init_geos(struct iwl3945_priv *priv)
{
struct iwl3945_channel_info *ch;
- struct ieee80211_hw_mode *modes;
+ struct ieee80211_supported_band *sband;
struct ieee80211_channel *channels;
struct ieee80211_channel *geo_ch;
struct ieee80211_rate *rates;
int i = 0;
- enum {
- A = 0,
- B = 1,
- G = 2,
- };
- int mode_count = 3;
- if (priv->modes) {
+ if (priv->bands[IEEE80211_BAND_2GHZ].n_bitrates ||
+ priv->bands[IEEE80211_BAND_5GHZ].n_bitrates) {
IWL_DEBUG_INFO("Geography modes already initialized.\n");
set_bit(STATUS_GEO_CONFIGURED, &priv->status);
return 0;
}
- modes = kzalloc(sizeof(struct ieee80211_hw_mode) * mode_count,
- GFP_KERNEL);
- if (!modes)
- return -ENOMEM;
-
channels = kzalloc(sizeof(struct ieee80211_channel) *
priv->channel_count, GFP_KERNEL);
- if (!channels) {
- kfree(modes);
+ if (!channels)
return -ENOMEM;
- }
- rates = kzalloc((sizeof(struct ieee80211_rate) * (IWL_MAX_RATES + 1)),
+ rates = kzalloc((sizeof(struct ieee80211_rate) * (IWL_RATE_COUNT + 1)),
GFP_KERNEL);
if (!rates) {
- kfree(modes);
kfree(channels);
return -ENOMEM;
}
- /* 0 = 802.11a
- * 1 = 802.11b
- * 2 = 802.11g
- */
-
/* 5.2GHz channels start after the 2.4GHz channels */
- modes[A].mode = MODE_IEEE80211A;
- modes[A].channels = &channels[ARRAY_SIZE(iwl3945_eeprom_band_1)];
- modes[A].rates = &rates[4];
- modes[A].num_rates = 8; /* just OFDM */
- modes[A].num_channels = 0;
-
- modes[B].mode = MODE_IEEE80211B;
- modes[B].channels = channels;
- modes[B].rates = rates;
- modes[B].num_rates = 4; /* just CCK */
- modes[B].num_channels = 0;
-
- modes[G].mode = MODE_IEEE80211G;
- modes[G].channels = channels;
- modes[G].rates = rates;
- modes[G].num_rates = 12; /* OFDM & CCK */
- modes[G].num_channels = 0;
+ sband = &priv->bands[IEEE80211_BAND_5GHZ];
+ sband->channels = &channels[ARRAY_SIZE(iwl3945_eeprom_band_1)];
+ /* just OFDM */
+ sband->bitrates = &rates[IWL_FIRST_OFDM_RATE];
+ sband->n_bitrates = IWL_RATE_COUNT - IWL_FIRST_OFDM_RATE;
+
+ sband = &priv->bands[IEEE80211_BAND_2GHZ];
+ sband->channels = channels;
+ /* OFDM & CCK */
+ sband->bitrates = rates;
+ sband->n_bitrates = IWL_RATE_COUNT;
priv->ieee_channels = channels;
priv->ieee_rates = rates;
iwl3945_init_hw_rates(priv, rates);
- for (i = 0, geo_ch = channels; i < priv->channel_count; i++) {
+ for (i = 0; i < priv->channel_count; i++) {
ch = &priv->channel_info[i];
- if (!is_channel_valid(ch)) {
- IWL_DEBUG_INFO("Channel %d [%sGHz] is restricted -- "
- "skipping.\n",
- ch->channel, is_channel_a_band(ch) ?
- "5.2" : "2.4");
+ /* FIXME: might be removed if scan is OK*/
+ if (!is_channel_valid(ch))
continue;
- }
if (is_channel_a_band(ch))
- geo_ch = &modes[A].channels[modes[A].num_channels++];
- else {
- geo_ch = &modes[B].channels[modes[B].num_channels++];
- modes[G].num_channels++;
- }
+ sband = &priv->bands[IEEE80211_BAND_5GHZ];
+ else
+ sband = &priv->bands[IEEE80211_BAND_2GHZ];
+
+ geo_ch = &sband->channels[sband->n_channels++];
- geo_ch->freq = ieee80211chan2mhz(ch->channel);
- geo_ch->chan = ch->channel;
- geo_ch->power_level = ch->max_power_avg;
- geo_ch->antenna_max = 0xff;
+ geo_ch->center_freq = ieee80211_channel_to_frequency(ch->channel);
+ geo_ch->max_power = ch->max_power_avg;
+ geo_ch->max_antenna_gain = 0xff;
+ geo_ch->hw_value = ch->channel;
if (is_channel_valid(ch)) {
- geo_ch->flag = IEEE80211_CHAN_W_SCAN;
- if (ch->flags & EEPROM_CHANNEL_IBSS)
- geo_ch->flag |= IEEE80211_CHAN_W_IBSS;
+ if (!(ch->flags & EEPROM_CHANNEL_IBSS))
+ geo_ch->flags |= IEEE80211_CHAN_NO_IBSS;
- if (ch->flags & EEPROM_CHANNEL_ACTIVE)
- geo_ch->flag |= IEEE80211_CHAN_W_ACTIVE_SCAN;
+ if (!(ch->flags & EEPROM_CHANNEL_ACTIVE))
+ geo_ch->flags |= IEEE80211_CHAN_PASSIVE_SCAN;
if (ch->flags & EEPROM_CHANNEL_RADAR)
- geo_ch->flag |= IEEE80211_CHAN_W_RADAR_DETECT;
+ geo_ch->flags |= IEEE80211_CHAN_RADAR;
if (ch->max_power_avg > priv->max_channel_txpower_limit)
priv->max_channel_txpower_limit =
ch->max_power_avg;
+ } else {
+ geo_ch->flags |= IEEE80211_CHAN_DISABLED;
}
- geo_ch->val = geo_ch->flag;
+ /* Save flags for reg domain usage */
+ geo_ch->orig_flags = geo_ch->flags;
+
+ IWL_DEBUG_INFO("Channel %d Freq=%d[%sGHz] %s flag=0%X\n",
+ ch->channel, geo_ch->center_freq,
+ is_channel_a_band(ch) ? "5.2" : "2.4",
+ geo_ch->flags & IEEE80211_CHAN_DISABLED ?
+ "restricted" : "valid",
+ geo_ch->flags);
}
- if ((modes[A].num_channels == 0) && priv->is_abg) {
+ if ((priv->bands[IEEE80211_BAND_5GHZ].n_channels == 0) &&
+ priv->cfg->sku & IWL_SKU_A) {
printk(KERN_INFO DRV_NAME
": Incorrectly detected BG card as ABG. Please send "
"your PCI ID 0x%04X:0x%04X to maintainer.\n",
priv->pci_dev->device, priv->pci_dev->subsystem_device);
- priv->is_abg = 0;
+ priv->cfg->sku &= ~IWL_SKU_A;
}
printk(KERN_INFO DRV_NAME
": Tunable channels: %d 802.11bg, %d 802.11a channels\n",
- modes[G].num_channels, modes[A].num_channels);
-
- /*
- * NOTE: We register these in preference of order -- the
- * stack doesn't currently (as of 7.0.6 / Apr 24 '07) pick
- * a phymode based on rates or AP capabilities but seems to
- * configure it purely on if the channel being configured
- * is supported by a mode -- and the first match is taken
- */
+ priv->bands[IEEE80211_BAND_2GHZ].n_channels,
+ priv->bands[IEEE80211_BAND_5GHZ].n_channels);
- if (modes[G].num_channels)
- ieee80211_register_hwmode(priv->hw, &modes[G]);
- if (modes[B].num_channels)
- ieee80211_register_hwmode(priv->hw, &modes[B]);
- if (modes[A].num_channels)
- ieee80211_register_hwmode(priv->hw, &modes[A]);
+ if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
+ priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
+ &priv->bands[IEEE80211_BAND_2GHZ];
+ if (priv->bands[IEEE80211_BAND_5GHZ].n_channels)
+ priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
+ &priv->bands[IEEE80211_BAND_5GHZ];
- priv->modes = modes;
set_bit(STATUS_GEO_CONFIGURED, &priv->status);
return 0;
}
+/*
+ * iwl3945_free_geos - undo allocations in iwl3945_init_geos
+ */
+static void iwl3945_free_geos(struct iwl3945_priv *priv)
+{
+ kfree(priv->ieee_channels);
+ kfree(priv->ieee_rates);
+ clear_bit(STATUS_GEO_CONFIGURED, &priv->status);
+}
+
/******************************************************************************
*
* uCode download functions
static void iwl3945_dealloc_ucode_pci(struct iwl3945_priv *priv)
{
- if (priv->ucode_code.v_addr != NULL) {
- pci_free_consistent(priv->pci_dev,
- priv->ucode_code.len,
- priv->ucode_code.v_addr,
- priv->ucode_code.p_addr);
- priv->ucode_code.v_addr = NULL;
- }
- if (priv->ucode_data.v_addr != NULL) {
- pci_free_consistent(priv->pci_dev,
- priv->ucode_data.len,
- priv->ucode_data.v_addr,
- priv->ucode_data.p_addr);
- priv->ucode_data.v_addr = NULL;
- }
- if (priv->ucode_data_backup.v_addr != NULL) {
- pci_free_consistent(priv->pci_dev,
- priv->ucode_data_backup.len,
- priv->ucode_data_backup.v_addr,
- priv->ucode_data_backup.p_addr);
- priv->ucode_data_backup.v_addr = NULL;
- }
- if (priv->ucode_init.v_addr != NULL) {
- pci_free_consistent(priv->pci_dev,
- priv->ucode_init.len,
- priv->ucode_init.v_addr,
- priv->ucode_init.p_addr);
- priv->ucode_init.v_addr = NULL;
- }
- if (priv->ucode_init_data.v_addr != NULL) {
- pci_free_consistent(priv->pci_dev,
- priv->ucode_init_data.len,
- priv->ucode_init_data.v_addr,
- priv->ucode_init_data.p_addr);
- priv->ucode_init_data.v_addr = NULL;
- }
- if (priv->ucode_boot.v_addr != NULL) {
- pci_free_consistent(priv->pci_dev,
- priv->ucode_boot.len,
- priv->ucode_boot.v_addr,
- priv->ucode_boot.p_addr);
- priv->ucode_boot.v_addr = NULL;
- }
+ iwl_free_fw_desc(priv->pci_dev, &priv->ucode_code);
+ iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data);
+ iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
+ iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init);
+ iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init_data);
+ iwl_free_fw_desc(priv->pci_dev, &priv->ucode_boot);
}
/**
iwl3945_write32(priv, CSR_RESET, 0);
}
-static int iwl3945_alloc_fw_desc(struct pci_dev *pci_dev, struct fw_desc *desc)
-{
- desc->v_addr = pci_alloc_consistent(pci_dev, desc->len, &desc->p_addr);
- return (desc->v_addr != NULL) ? 0 : -ENOMEM;
-}
-
/**
* iwl3945_read_ucode - Read uCode images from disk file.
*
int ret = 0;
const struct firmware *ucode_raw;
/* firmware file name contains uCode/driver compatibility version */
- const char *name = "iwlwifi-3945" IWL3945_UCODE_API ".ucode";
+ const char *name = priv->cfg->fw_name;
u8 *src;
size_t len;
u32 ver, inst_size, data_size, init_size, init_data_size, boot_size;
* 1) unmodified from disk
* 2) backup cache for save/restore during power-downs */
priv->ucode_code.len = inst_size;
- iwl3945_alloc_fw_desc(priv->pci_dev, &priv->ucode_code);
+ iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_code);
priv->ucode_data.len = data_size;
- iwl3945_alloc_fw_desc(priv->pci_dev, &priv->ucode_data);
+ iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data);
priv->ucode_data_backup.len = data_size;
- iwl3945_alloc_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
+ iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
if (!priv->ucode_code.v_addr || !priv->ucode_data.v_addr ||
!priv->ucode_data_backup.v_addr)
/* Initialization instructions and data */
if (init_size && init_data_size) {
priv->ucode_init.len = init_size;
- iwl3945_alloc_fw_desc(priv->pci_dev, &priv->ucode_init);
+ iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init);
priv->ucode_init_data.len = init_data_size;
- iwl3945_alloc_fw_desc(priv->pci_dev, &priv->ucode_init_data);
+ iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init_data);
if (!priv->ucode_init.v_addr || !priv->ucode_init_data.v_addr)
goto err_pci_alloc;
/* Bootstrap (instructions only, no data) */
if (boot_size) {
priv->ucode_boot.len = boot_size;
- iwl3945_alloc_fw_desc(priv->pci_dev, &priv->ucode_boot);
+ iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_boot);
if (!priv->ucode_boot.v_addr)
goto err_pci_alloc;
/* Clear out the uCode error bit if it is set */
clear_bit(STATUS_FW_ERROR, &priv->status);
- rc = iwl3945_init_channel_map(priv);
- if (rc) {
- IWL_ERROR("initializing regulatory failed: %d\n", rc);
- return;
- }
-
- iwl3945_init_geos(priv);
-
if (iwl3945_is_rfkill(priv))
return;
- if (!priv->mac80211_registered) {
- /* Unlock so any user space entry points can call back into
- * the driver without a deadlock... */
- mutex_unlock(&priv->mutex);
- iwl3945_rate_control_register(priv->hw);
- rc = ieee80211_register_hw(priv->hw);
- priv->hw->conf.beacon_int = 100;
- mutex_lock(&priv->mutex);
-
- if (rc) {
- iwl3945_rate_control_unregister(priv->hw);
- IWL_ERROR("Failed to register network "
- "device (error %d)\n", rc);
- return;
- }
-
- priv->mac80211_registered = 1;
-
- iwl3945_reset_channel_flag(priv);
- } else
- ieee80211_start_queues(priv->hw);
+ ieee80211_wake_queues(priv->hw);
priv->active_rate = priv->rates_mask;
priv->active_rate_basic = priv->rates_mask & IWL_BASIC_RATES_MASK;
/* Configure the adapter for unassociated operation */
iwl3945_commit_rxon(priv);
- /* At this point, the NIC is initialized and operational */
- priv->notif_missed_beacons = 0;
- set_bit(STATUS_READY, &priv->status);
-
iwl3945_reg_txpower_periodic(priv);
+ iwl3945_led_register(priv);
+
IWL_DEBUG_INFO("ALIVE processing complete.\n");
+ set_bit(STATUS_READY, &priv->status);
+ wake_up_interruptible(&priv->wait_command_queue);
if (priv->error_recovering)
iwl3945_error_recovery(priv);
+ ieee80211_notify_mac(priv->hw, IEEE80211_NOTIFY_RE_ASSOC);
return;
restart:
if (!exit_pending)
set_bit(STATUS_EXIT_PENDING, &priv->status);
+ iwl3945_led_unregister(priv);
iwl3945_clear_stations_table(priv);
/* Unblock any waiting calls */
iwl3945_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
/* tell the device to stop sending interrupts */
+ spin_lock_irqsave(&priv->lock, flags);
iwl3945_disable_interrupts(priv);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ iwl_synchronize_irq(priv);
if (priv->mac80211_registered)
ieee80211_stop_queues(priv->hw);
STATUS_RF_KILL_HW |
test_bit(STATUS_RF_KILL_SW, &priv->status) <<
STATUS_RF_KILL_SW |
+ test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
+ STATUS_GEO_CONFIGURED |
test_bit(STATUS_IN_SUSPEND, &priv->status) <<
STATUS_IN_SUSPEND;
goto exit;
STATUS_RF_KILL_HW |
test_bit(STATUS_RF_KILL_SW, &priv->status) <<
STATUS_RF_KILL_SW |
+ test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
+ STATUS_GEO_CONFIGURED |
test_bit(STATUS_IN_SUSPEND, &priv->status) <<
STATUS_IN_SUSPEND |
test_bit(STATUS_FW_ERROR, &priv->status) <<
static int __iwl3945_up(struct iwl3945_priv *priv)
{
- DECLARE_MAC_BUF(mac);
int rc, i;
if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
if (test_bit(STATUS_RF_KILL_SW, &priv->status)) {
IWL_WARNING("Radio disabled by SW RF kill (module "
"parameter)\n");
- return 0;
+ return -ENODEV;
}
if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) {
return -EIO;
}
+ /* If platform's RF_KILL switch is NOT set to KILL */
+ if (iwl3945_read32(priv, CSR_GP_CNTRL) &
+ CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
+ clear_bit(STATUS_RF_KILL_HW, &priv->status);
+ else {
+ set_bit(STATUS_RF_KILL_HW, &priv->status);
+ if (!test_bit(STATUS_IN_SUSPEND, &priv->status)) {
+ IWL_WARNING("Radio disabled by HW RF Kill switch\n");
+ return -ENODEV;
+ }
+ }
+
iwl3945_write32(priv, CSR_INT, 0xFFFFFFFF);
rc = iwl3945_hw_nic_init(priv);
* This will be used to initialize the on-board processor's
* data SRAM for a clean start when the runtime program first loads. */
memcpy(priv->ucode_data_backup.v_addr, priv->ucode_data.v_addr,
- priv->ucode_data.len);
+ priv->ucode_data.len);
+
+ /* We return success when we resume from suspend and rf_kill is on. */
+ if (test_bit(STATUS_RF_KILL_HW, &priv->status))
+ return 0;
for (i = 0; i < MAX_HW_RESTARTS; i++) {
/* start card; "initialize" will load runtime ucode */
iwl3945_nic_start(priv);
- /* MAC Address location in EEPROM is same for 3945/4965 */
- get_eeprom_mac(priv, priv->mac_addr);
- IWL_DEBUG_INFO("MAC address: %s\n",
- print_mac(mac, priv->mac_addr));
-
- SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr);
-
IWL_DEBUG_INFO(DRV_NAME " is coming up\n");
return 0;
mutex_unlock(&priv->mutex);
}
+static void iwl3945_bg_set_monitor(struct work_struct *work)
+{
+ struct iwl3945_priv *priv = container_of(work,
+ struct iwl3945_priv, set_monitor);
+
+ IWL_DEBUG(IWL_DL_STATE, "setting monitor mode\n");
+
+ mutex_lock(&priv->mutex);
+
+ if (!iwl3945_is_ready(priv))
+ IWL_DEBUG(IWL_DL_STATE, "leave - not ready\n");
+ else
+ if (iwl3945_set_mode(priv, IEEE80211_IF_TYPE_MNTR) != 0)
+ IWL_ERROR("iwl3945_set_mode() failed\n");
+
+ mutex_unlock(&priv->mutex);
+}
+
#define IWL_SCAN_CHECK_WATCHDOG (7 * HZ)
static void iwl3945_bg_scan_check(struct work_struct *data)
struct iwl3945_scan_cmd *scan;
struct ieee80211_conf *conf = NULL;
u8 direct_mask;
- int phymode;
+ enum ieee80211_band band;
conf = ieee80211_get_hw_conf(priv->hw);
priv->direct_ssid, priv->direct_ssid_len);
direct_mask = 1;
} else if (!iwl3945_is_associated(priv) && priv->essid_len) {
+ IWL_DEBUG_SCAN
+ ("Kicking off one direct scan for '%s' when not associated\n",
+ iwl3945_escape_essid(priv->essid, priv->essid_len));
scan->direct_scan[0].id = WLAN_EID_SSID;
scan->direct_scan[0].len = priv->essid_len;
memcpy(scan->direct_scan[0].ssid, priv->essid, priv->essid_len);
direct_mask = 1;
- } else
+ } else {
+ IWL_DEBUG_SCAN("Kicking off one indirect scan.\n");
direct_mask = 0;
+ }
/* We don't build a direct scan probe request; the uCode will do
* that based on the direct_mask added to each channel entry */
scan->tx_cmd.len = cpu_to_le16(
iwl3945_fill_probe_req(priv, (struct ieee80211_mgmt *)scan->data,
- IWL_MAX_SCAN_SIZE - sizeof(scan), 0));
+ IWL_MAX_SCAN_SIZE - sizeof(*scan), 0));
scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
scan->tx_cmd.sta_id = priv->hw_setting.bcast_sta_id;
scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
scan->tx_cmd.rate = IWL_RATE_1M_PLCP;
scan->good_CRC_th = 0;
- phymode = MODE_IEEE80211G;
+ band = IEEE80211_BAND_2GHZ;
break;
case 1:
scan->tx_cmd.rate = IWL_RATE_6M_PLCP;
scan->good_CRC_th = IWL_GOOD_CRC_TH;
- phymode = MODE_IEEE80211A;
+ band = IEEE80211_BAND_5GHZ;
break;
default:
scan->filter_flags = RXON_FILTER_PROMISC_MSK;
if (direct_mask)
- IWL_DEBUG_SCAN
- ("Initiating direct scan for %s.\n",
- iwl3945_escape_essid(priv->essid, priv->essid_len));
+ scan->channel_count =
+ iwl3945_get_channels_for_scan(
+ priv, band, 1, /* active */
+ direct_mask,
+ (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]);
else
- IWL_DEBUG_SCAN("Initiating indirect scan.\n");
-
- scan->channel_count =
- iwl3945_get_channels_for_scan(
- priv, phymode, 1, /* active */
- direct_mask,
- (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]);
+ scan->channel_count =
+ iwl3945_get_channels_for_scan(
+ priv, band, 0, /* passive */
+ direct_mask,
+ (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]);
cmd.len += le16_to_cpu(scan->tx_cmd.len) +
scan->channel_count * sizeof(struct iwl3945_scan_channel);
mutex_unlock(&priv->mutex);
}
+#define IWL_DELAY_NEXT_SCAN (HZ*2)
+
static void iwl3945_bg_post_associate(struct work_struct *data)
{
struct iwl3945_priv *priv = container_of(data, struct iwl3945_priv,
mutex_lock(&priv->mutex);
- if (!priv->interface_id || !priv->is_open) {
+ if (!priv->vif || !priv->is_open) {
mutex_unlock(&priv->mutex);
return;
}
iwl3945_add_station(priv, iwl3945_broadcast_addr, 0, 0);
iwl3945_add_station(priv, priv->bssid, 0, 0);
iwl3945_sync_sta(priv, IWL_STA_ID,
- (priv->phymode == MODE_IEEE80211A)?
+ (priv->band == IEEE80211_BAND_5GHZ) ?
IWL_RATE_6M_PLCP : IWL_RATE_1M_PLCP,
CMD_ASYNC);
iwl3945_rate_scale_init(priv->hw, IWL_STA_ID);
iwl3945_sequence_reset(priv);
-#ifdef CONFIG_IWL3945_QOS
iwl3945_activate_qos(priv, 0);
-#endif /* CONFIG_IWL3945_QOS */
+
+ /* we have just associated, don't start scan too early */
+ priv->next_scan_jiffies = jiffies + IWL_DELAY_NEXT_SCAN;
mutex_unlock(&priv->mutex);
}
mutex_unlock(&priv->mutex);
}
+static int iwl3945_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf);
+
static void iwl3945_bg_scan_completed(struct work_struct *work)
{
struct iwl3945_priv *priv =
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
+ if (test_bit(STATUS_CONF_PENDING, &priv->status))
+ iwl3945_mac_config(priv->hw, ieee80211_get_hw_conf(priv->hw));
+
ieee80211_scan_completed(priv->hw);
/* Since setting the TXPOWER may have been deferred while
*
*****************************************************************************/
+#define UCODE_READY_TIMEOUT (2 * HZ)
+
static int iwl3945_mac_start(struct ieee80211_hw *hw)
{
struct iwl3945_priv *priv = hw->priv;
+ int ret;
IWL_DEBUG_MAC80211("enter\n");
+ if (pci_enable_device(priv->pci_dev)) {
+ IWL_ERROR("Fail to pci_enable_device\n");
+ return -ENODEV;
+ }
+ pci_restore_state(priv->pci_dev);
+ pci_enable_msi(priv->pci_dev);
+
+ ret = request_irq(priv->pci_dev->irq, iwl3945_isr, IRQF_SHARED,
+ DRV_NAME, priv);
+ if (ret) {
+ IWL_ERROR("Error allocating IRQ %d\n", priv->pci_dev->irq);
+ goto out_disable_msi;
+ }
+
/* we should be verifying the device is ready to be opened */
mutex_lock(&priv->mutex);
- priv->is_open = 1;
+ memset(&priv->staging_rxon, 0, sizeof(struct iwl3945_rxon_cmd));
+ /* fetch ucode file from disk, alloc and copy to bus-master buffers ...
+ * ucode filename and max sizes are card-specific. */
- if (!iwl3945_is_rfkill(priv))
- ieee80211_start_queues(priv->hw);
+ if (!priv->ucode_code.len) {
+ ret = iwl3945_read_ucode(priv);
+ if (ret) {
+ IWL_ERROR("Could not read microcode: %d\n", ret);
+ mutex_unlock(&priv->mutex);
+ goto out_release_irq;
+ }
+ }
+
+ ret = __iwl3945_up(priv);
mutex_unlock(&priv->mutex);
+
+ if (ret)
+ goto out_release_irq;
+
+ IWL_DEBUG_INFO("Start UP work.\n");
+
+ if (test_bit(STATUS_IN_SUSPEND, &priv->status))
+ return 0;
+
+ /* Wait for START_ALIVE from ucode. Otherwise callbacks from
+ * mac80211 will not be run successfully. */
+ ret = wait_event_interruptible_timeout(priv->wait_command_queue,
+ test_bit(STATUS_READY, &priv->status),
+ UCODE_READY_TIMEOUT);
+ if (!ret) {
+ if (!test_bit(STATUS_READY, &priv->status)) {
+ IWL_ERROR("Wait for START_ALIVE timeout after %dms.\n",
+ jiffies_to_msecs(UCODE_READY_TIMEOUT));
+ ret = -ETIMEDOUT;
+ goto out_release_irq;
+ }
+ }
+
+ priv->is_open = 1;
IWL_DEBUG_MAC80211("leave\n");
return 0;
+
+out_release_irq:
+ free_irq(priv->pci_dev->irq, priv);
+out_disable_msi:
+ pci_disable_msi(priv->pci_dev);
+ pci_disable_device(priv->pci_dev);
+ priv->is_open = 0;
+ IWL_DEBUG_MAC80211("leave - failed\n");
+ return ret;
}
static void iwl3945_mac_stop(struct ieee80211_hw *hw)
IWL_DEBUG_MAC80211("enter\n");
+ if (!priv->is_open) {
+ IWL_DEBUG_MAC80211("leave - skip\n");
+ return;
+ }
- mutex_lock(&priv->mutex);
- /* stop mac, cancel any scan request and clear
- * RXON_FILTER_ASSOC_MSK BIT
- */
priv->is_open = 0;
- iwl3945_scan_cancel_timeout(priv, 100);
- cancel_delayed_work(&priv->post_associate);
- priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
- iwl3945_commit_rxon(priv);
- mutex_unlock(&priv->mutex);
+
+ if (iwl3945_is_ready_rf(priv)) {
+ /* stop mac, cancel any scan request and clear
+ * RXON_FILTER_ASSOC_MSK BIT
+ */
+ mutex_lock(&priv->mutex);
+ iwl3945_scan_cancel_timeout(priv, 100);
+ cancel_delayed_work(&priv->post_associate);
+ mutex_unlock(&priv->mutex);
+ }
+
+ iwl3945_down(priv);
+
+ flush_workqueue(priv->workqueue);
+ free_irq(priv->pci_dev->irq, priv);
+ pci_disable_msi(priv->pci_dev);
+ pci_save_state(priv->pci_dev);
+ pci_disable_device(priv->pci_dev);
IWL_DEBUG_MAC80211("leave\n");
}
-static int iwl3945_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb,
- struct ieee80211_tx_control *ctl)
+static int iwl3945_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
{
struct iwl3945_priv *priv = hw->priv;
}
IWL_DEBUG_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
- ctl->tx_rate);
+ ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);
- if (iwl3945_tx_skb(priv, skb, ctl))
+ if (iwl3945_tx_skb(priv, skb))
dev_kfree_skb_any(skb);
IWL_DEBUG_MAC80211("leave\n");
unsigned long flags;
DECLARE_MAC_BUF(mac);
- IWL_DEBUG_MAC80211("enter: id %d, type %d\n", conf->if_id, conf->type);
+ IWL_DEBUG_MAC80211("enter: type %d\n", conf->type);
- if (priv->interface_id) {
- IWL_DEBUG_MAC80211("leave - interface_id != 0\n");
+ if (priv->vif) {
+ IWL_DEBUG_MAC80211("leave - vif != NULL\n");
return -EOPNOTSUPP;
}
spin_lock_irqsave(&priv->lock, flags);
- priv->interface_id = conf->if_id;
+ priv->vif = conf->vif;
spin_unlock_irqrestore(&priv->lock, flags);
memcpy(priv->mac_addr, conf->mac_addr, ETH_ALEN);
}
- iwl3945_set_mode(priv, conf->type);
+ if (iwl3945_is_ready(priv))
+ iwl3945_set_mode(priv, conf->type);
- IWL_DEBUG_MAC80211("leave\n");
mutex_unlock(&priv->mutex);
+ IWL_DEBUG_MAC80211("leave\n");
return 0;
}
struct iwl3945_priv *priv = hw->priv;
const struct iwl3945_channel_info *ch_info;
unsigned long flags;
+ int ret = 0;
mutex_lock(&priv->mutex);
- IWL_DEBUG_MAC80211("enter to channel %d\n", conf->channel);
+ IWL_DEBUG_MAC80211("enter to channel %d\n", conf->channel->hw_value);
+
+ priv->add_radiotap = !!(conf->flags & IEEE80211_CONF_RADIOTAP);
if (!iwl3945_is_ready(priv)) {
IWL_DEBUG_MAC80211("leave - not ready\n");
- mutex_unlock(&priv->mutex);
- return -EIO;
+ ret = -EIO;
+ goto out;
}
- /* TODO: Figure out how to get ieee80211_local->sta_scanning w/ only
- * what is exposed through include/ declarations */
if (unlikely(!iwl3945_param_disable_hw_scan &&
test_bit(STATUS_SCANNING, &priv->status))) {
IWL_DEBUG_MAC80211("leave - scanning\n");
+ set_bit(STATUS_CONF_PENDING, &priv->status);
mutex_unlock(&priv->mutex);
return 0;
}
spin_lock_irqsave(&priv->lock, flags);
- ch_info = iwl3945_get_channel_info(priv, conf->phymode, conf->channel);
+ ch_info = iwl3945_get_channel_info(priv, conf->channel->band,
+ conf->channel->hw_value);
if (!is_channel_valid(ch_info)) {
IWL_DEBUG_SCAN("Channel %d [%d] is INVALID for this SKU.\n",
- conf->channel, conf->phymode);
+ conf->channel->hw_value, conf->channel->band);
IWL_DEBUG_MAC80211("leave - invalid channel\n");
spin_unlock_irqrestore(&priv->lock, flags);
- mutex_unlock(&priv->mutex);
- return -EINVAL;
+ ret = -EINVAL;
+ goto out;
}
- iwl3945_set_rxon_channel(priv, conf->phymode, conf->channel);
+ iwl3945_set_rxon_channel(priv, conf->channel->band, conf->channel->hw_value);
- iwl3945_set_flags_for_phymode(priv, conf->phymode);
+ iwl3945_set_flags_for_phymode(priv, conf->channel->band);
/* The list of supported rates and rate mask can be different
* for each phymode; since the phymode may have changed, reset
#ifdef IEEE80211_CONF_CHANNEL_SWITCH
if (conf->flags & IEEE80211_CONF_CHANNEL_SWITCH) {
iwl3945_hw_channel_switch(priv, conf->channel);
- mutex_unlock(&priv->mutex);
- return 0;
+ goto out;
}
#endif
if (!conf->radio_enabled) {
IWL_DEBUG_MAC80211("leave - radio disabled\n");
- mutex_unlock(&priv->mutex);
- return 0;
+ goto out;
}
if (iwl3945_is_rfkill(priv)) {
IWL_DEBUG_MAC80211("leave - RF kill\n");
- mutex_unlock(&priv->mutex);
- return -EIO;
+ ret = -EIO;
+ goto out;
}
iwl3945_set_rate(priv);
IWL_DEBUG_MAC80211("leave\n");
+out:
+ clear_bit(STATUS_CONF_PENDING, &priv->status);
mutex_unlock(&priv->mutex);
-
- return 0;
+ return ret;
}
static void iwl3945_config_ap(struct iwl3945_priv *priv)
{
int rc = 0;
- if (priv->status & STATUS_EXIT_PENDING)
+ if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
/* The following should be done only at AP bring up */
* clear sta table, add BCAST sta... */
}
-static int iwl3945_mac_config_interface(struct ieee80211_hw *hw, int if_id,
+static int iwl3945_mac_config_interface(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
struct ieee80211_if_conf *conf)
{
struct iwl3945_priv *priv = hw->priv;
if (conf == NULL)
return -EIO;
+ if (priv->vif != vif) {
+ IWL_DEBUG_MAC80211("leave - priv->vif != vif\n");
+ return 0;
+ }
+
/* XXX: this MUST use conf->mac_addr */
if ((priv->iw_mode == IEEE80211_IF_TYPE_AP) &&
return 0;
}
+ if (!iwl3945_is_alive(priv))
+ return -EAGAIN;
+
mutex_lock(&priv->mutex);
- IWL_DEBUG_MAC80211("enter: interface id %d\n", if_id);
if (conf->bssid)
IWL_DEBUG_MAC80211("bssid: %s\n",
print_mac(mac, conf->bssid));
if (unlikely(test_bit(STATUS_SCANNING, &priv->status)) &&
!(priv->hw->flags & IEEE80211_HW_NO_PROBE_FILTERING)) {
*/
- if (unlikely(test_bit(STATUS_SCANNING, &priv->status))) {
- IWL_DEBUG_MAC80211("leave - scanning\n");
- mutex_unlock(&priv->mutex);
- return 0;
- }
-
- if (priv->interface_id != if_id) {
- IWL_DEBUG_MAC80211("leave - interface_id != if_id\n");
- mutex_unlock(&priv->mutex);
- return 0;
- }
if (priv->iw_mode == IEEE80211_IF_TYPE_AP) {
if (!conf->bssid) {
priv->ibss_beacon = conf->beacon;
}
+ if (iwl3945_is_rfkill(priv))
+ goto done;
+
if (conf->bssid && !is_zero_ether_addr(conf->bssid) &&
!is_multicast_ether_addr(conf->bssid)) {
/* If there is currently a HW scan going on in the background
iwl3945_commit_rxon(priv);
}
+ done:
spin_lock_irqsave(&priv->lock, flags);
if (!conf->ssid_len)
memset(priv->essid, 0, IW_ESSID_MAX_SIZE);
* XXX: dummy
* see also iwl3945_connection_init_rx_config
*/
- *total_flags = 0;
+ struct iwl3945_priv *priv = hw->priv;
+ int new_flags = 0;
+ if (changed_flags & (FIF_PROMISC_IN_BSS | FIF_OTHER_BSS)) {
+ if (*total_flags & (FIF_PROMISC_IN_BSS | FIF_OTHER_BSS)) {
+ IWL_DEBUG_MAC80211("Enter: type %d (0x%x, 0x%x)\n",
+ IEEE80211_IF_TYPE_MNTR,
+ changed_flags, *total_flags);
+ /* queue work 'cuz mac80211 is holding a lock which
+ * prevents us from issuing (synchronous) f/w cmds */
+ queue_work(priv->workqueue, &priv->set_monitor);
+ new_flags &= FIF_PROMISC_IN_BSS |
+ FIF_OTHER_BSS |
+ FIF_ALLMULTI;
+ }
+ }
+ *total_flags = new_flags;
}
static void iwl3945_mac_remove_interface(struct ieee80211_hw *hw,
mutex_lock(&priv->mutex);
- iwl3945_scan_cancel_timeout(priv, 100);
- cancel_delayed_work(&priv->post_associate);
- priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
- iwl3945_commit_rxon(priv);
-
- if (priv->interface_id == conf->if_id) {
- priv->interface_id = 0;
+ if (iwl3945_is_ready_rf(priv)) {
+ iwl3945_scan_cancel_timeout(priv, 100);
+ cancel_delayed_work(&priv->post_associate);
+ priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+ iwl3945_commit_rxon(priv);
+ }
+ if (priv->vif == conf->vif) {
+ priv->vif = NULL;
memset(priv->bssid, 0, ETH_ALEN);
memset(priv->essid, 0, IW_ESSID_MAX_SIZE);
priv->essid_len = 0;
mutex_unlock(&priv->mutex);
IWL_DEBUG_MAC80211("leave\n");
-
}
-#define IWL_DELAY_NEXT_SCAN (HZ*2)
static int iwl3945_mac_hw_scan(struct ieee80211_hw *hw, u8 *ssid, size_t len)
{
int rc = 0;
goto out_unlock;
}
- /* if we just finished scan ask for delay */
- if (priv->last_scan_jiffies &&
+ /* we don't schedule scan within next_scan_jiffies period */
+ if (priv->next_scan_jiffies &&
+ time_after(priv->next_scan_jiffies, jiffies)) {
+ rc = -EAGAIN;
+ goto out_unlock;
+ }
+ /* if we just finished scan ask for delay for a broadcast scan */
+ if ((len == 0) && priv->last_scan_jiffies &&
time_after(priv->last_scan_jiffies + IWL_DELAY_NEXT_SCAN,
jiffies)) {
rc = -EAGAIN;
goto out_unlock;
}
if (len) {
- IWL_DEBUG_SCAN("direct scan for "
- "%s [%d]\n ",
+ IWL_DEBUG_SCAN("direct scan for %s [%d]\n ",
iwl3945_escape_essid(ssid, len), (int)len);
priv->one_direct_scan = 1;
return rc;
}
-static int iwl3945_mac_conf_tx(struct ieee80211_hw *hw, int queue,
+static int iwl3945_mac_conf_tx(struct ieee80211_hw *hw, u16 queue,
const struct ieee80211_tx_queue_params *params)
{
struct iwl3945_priv *priv = hw->priv;
-#ifdef CONFIG_IWL3945_QOS
unsigned long flags;
int q;
-#endif /* CONFIG_IWL3945_QOS */
IWL_DEBUG_MAC80211("enter\n");
return 0;
}
-#ifdef CONFIG_IWL3945_QOS
if (!priv->qos_data.qos_enable) {
priv->qos_data.qos_active = 0;
IWL_DEBUG_MAC80211("leave - qos not enabled\n");
priv->qos_data.def_qos_parm.ac[q].cw_max = cpu_to_le16(params->cw_max);
priv->qos_data.def_qos_parm.ac[q].aifsn = params->aifs;
priv->qos_data.def_qos_parm.ac[q].edca_txop =
- cpu_to_le16((params->burst_time * 100));
+ cpu_to_le16((params->txop * 32));
priv->qos_data.def_qos_parm.ac[q].reserved1 = 0;
priv->qos_data.qos_active = 1;
mutex_unlock(&priv->mutex);
-#endif /*CONFIG_IWL3945_QOS */
-
IWL_DEBUG_MAC80211("leave\n");
return 0;
}
q = &txq->q;
avail = iwl3945_queue_space(q);
- stats->data[i].len = q->n_window - avail;
- stats->data[i].limit = q->n_window - q->high_mark;
- stats->data[i].count = q->n_window;
+ stats[i].len = q->n_window - avail;
+ stats[i].limit = q->n_window - q->high_mark;
+ stats[i].count = q->n_window;
}
spin_unlock_irqrestore(&priv->lock, flags);
mutex_lock(&priv->mutex);
IWL_DEBUG_MAC80211("enter\n");
-#ifdef CONFIG_IWL3945_QOS
iwl3945_reset_qos(priv);
-#endif
+
cancel_delayed_work(&priv->post_associate);
spin_lock_irqsave(&priv->lock, flags);
spin_unlock_irqrestore(&priv->lock, flags);
+ if (!iwl3945_is_ready_rf(priv)) {
+ IWL_DEBUG_MAC80211("leave - not ready\n");
+ mutex_unlock(&priv->mutex);
+ return;
+ }
+
/* we are restarting association process
* clear RXON_FILTER_ASSOC_MSK bit
*/
return;
}
- if (!iwl3945_is_ready_rf(priv)) {
- IWL_DEBUG_MAC80211("leave - not ready\n");
- mutex_unlock(&priv->mutex);
- return;
- }
-
- priv->only_active_channel = 0;
-
iwl3945_set_rate(priv);
mutex_unlock(&priv->mutex);
}
-static int iwl3945_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb,
- struct ieee80211_tx_control *control)
+static int iwl3945_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
{
struct iwl3945_priv *priv = hw->priv;
unsigned long flags;
IWL_DEBUG_MAC80211("leave\n");
spin_unlock_irqrestore(&priv->lock, flags);
-#ifdef CONFIG_IWL3945_QOS
iwl3945_reset_qos(priv);
-#endif
queue_work(priv->workqueue, &priv->post_associate.work);
static DEVICE_ATTR(filter_flags, S_IWUSR | S_IRUGO, show_filter_flags,
store_filter_flags);
-static ssize_t show_tune(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct iwl3945_priv *priv = (struct iwl3945_priv *)d->driver_data;
-
- return sprintf(buf, "0x%04X\n",
- (priv->phymode << 8) |
- le16_to_cpu(priv->active_rxon.channel));
-}
-
-static void iwl3945_set_flags_for_phymode(struct iwl3945_priv *priv, u8 phymode);
-
-static ssize_t store_tune(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct iwl3945_priv *priv = (struct iwl3945_priv *)d->driver_data;
- char *p = (char *)buf;
- u16 tune = simple_strtoul(p, &p, 0);
- u8 phymode = (tune >> 8) & 0xff;
- u16 channel = tune & 0xff;
-
- IWL_DEBUG_INFO("Tune request to:%d channel:%d\n", phymode, channel);
-
- mutex_lock(&priv->mutex);
- if ((le16_to_cpu(priv->staging_rxon.channel) != channel) ||
- (priv->phymode != phymode)) {
- const struct iwl3945_channel_info *ch_info;
-
- ch_info = iwl3945_get_channel_info(priv, phymode, channel);
- if (!ch_info) {
- IWL_WARNING("Requested invalid phymode/channel "
- "combination: %d %d\n", phymode, channel);
- mutex_unlock(&priv->mutex);
- return -EINVAL;
- }
-
- /* Cancel any currently running scans... */
- if (iwl3945_scan_cancel_timeout(priv, 100))
- IWL_WARNING("Could not cancel scan.\n");
- else {
- IWL_DEBUG_INFO("Committing phymode and "
- "rxon.channel = %d %d\n",
- phymode, channel);
-
- iwl3945_set_rxon_channel(priv, phymode, channel);
- iwl3945_set_flags_for_phymode(priv, phymode);
-
- iwl3945_set_rate(priv);
- iwl3945_commit_rxon(priv);
- }
- }
- mutex_unlock(&priv->mutex);
-
- return count;
-}
-
-static DEVICE_ATTR(tune, S_IWUSR | S_IRUGO, show_tune, store_tune);
-
#ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT
static ssize_t show_measurement(struct device *d,
show_measurement, store_measurement);
#endif /* CONFIG_IWL3945_SPECTRUM_MEASUREMENT */
-static ssize_t show_rate(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct iwl3945_priv *priv = dev_get_drvdata(d);
- unsigned long flags;
- int i;
-
- spin_lock_irqsave(&priv->sta_lock, flags);
- if (priv->iw_mode == IEEE80211_IF_TYPE_STA)
- i = priv->stations[IWL_AP_ID].current_rate.s.rate;
- else
- i = priv->stations[IWL_STA_ID].current_rate.s.rate;
- spin_unlock_irqrestore(&priv->sta_lock, flags);
-
- i = iwl3945_rate_index_from_plcp(i);
- if (i == -1)
- return sprintf(buf, "0\n");
-
- return sprintf(buf, "%d%s\n",
- (iwl3945_rates[i].ieee >> 1),
- (iwl3945_rates[i].ieee & 0x1) ? ".5" : "");
-}
-
-static DEVICE_ATTR(rate, S_IRUSR, show_rate, NULL);
-
static ssize_t store_retry_rate(struct device *d,
struct device_attribute *attr,
const char *buf, size_t count)
static ssize_t show_channels(struct device *d,
struct device_attribute *attr, char *buf)
{
- struct iwl3945_priv *priv = dev_get_drvdata(d);
- int len = 0, i;
- struct ieee80211_channel *channels = NULL;
- const struct ieee80211_hw_mode *hw_mode = NULL;
- int count = 0;
-
- if (!iwl3945_is_ready(priv))
- return -EAGAIN;
-
- hw_mode = iwl3945_get_hw_mode(priv, MODE_IEEE80211G);
- if (!hw_mode)
- hw_mode = iwl3945_get_hw_mode(priv, MODE_IEEE80211B);
- if (hw_mode) {
- channels = hw_mode->channels;
- count = hw_mode->num_channels;
- }
-
- len +=
- sprintf(&buf[len],
- "Displaying %d channels in 2.4GHz band "
- "(802.11bg):\n", count);
-
- for (i = 0; i < count; i++)
- len += sprintf(&buf[len], "%d: %ddBm: BSS%s%s, %s.\n",
- channels[i].chan,
- channels[i].power_level,
- channels[i].
- flag & IEEE80211_CHAN_W_RADAR_DETECT ?
- " (IEEE 802.11h required)" : "",
- (!(channels[i].flag & IEEE80211_CHAN_W_IBSS)
- || (channels[i].
- flag &
- IEEE80211_CHAN_W_RADAR_DETECT)) ? "" :
- ", IBSS",
- channels[i].
- flag & IEEE80211_CHAN_W_ACTIVE_SCAN ?
- "active/passive" : "passive only");
-
- hw_mode = iwl3945_get_hw_mode(priv, MODE_IEEE80211A);
- if (hw_mode) {
- channels = hw_mode->channels;
- count = hw_mode->num_channels;
- } else {
- channels = NULL;
- count = 0;
- }
-
- len += sprintf(&buf[len], "Displaying %d channels in 5.2GHz band "
- "(802.11a):\n", count);
-
- for (i = 0; i < count; i++)
- len += sprintf(&buf[len], "%d: %ddBm: BSS%s%s, %s.\n",
- channels[i].chan,
- channels[i].power_level,
- channels[i].
- flag & IEEE80211_CHAN_W_RADAR_DETECT ?
- " (IEEE 802.11h required)" : "",
- (!(channels[i].flag & IEEE80211_CHAN_W_IBSS)
- || (channels[i].
- flag &
- IEEE80211_CHAN_W_RADAR_DETECT)) ? "" :
- ", IBSS",
- channels[i].
- flag & IEEE80211_CHAN_W_ACTIVE_SCAN ?
- "active/passive" : "passive only");
-
- return len;
+ /* all this shit doesn't belong into sysfs anyway */
+ return 0;
}
static DEVICE_ATTR(channels, S_IRUSR, show_channels, NULL);
INIT_WORK(&priv->abort_scan, iwl3945_bg_abort_scan);
INIT_WORK(&priv->rf_kill, iwl3945_bg_rf_kill);
INIT_WORK(&priv->beacon_update, iwl3945_bg_beacon_update);
+ INIT_WORK(&priv->set_monitor, iwl3945_bg_set_monitor);
INIT_DELAYED_WORK(&priv->post_associate, iwl3945_bg_post_associate);
INIT_DELAYED_WORK(&priv->init_alive_start, iwl3945_bg_init_alive_start);
INIT_DELAYED_WORK(&priv->alive_start, iwl3945_bg_alive_start);
&dev_attr_measurement.attr,
#endif
&dev_attr_power_level.attr,
- &dev_attr_rate.attr,
&dev_attr_retry_rate.attr,
&dev_attr_rf_kill.attr,
&dev_attr_rs_window.attr,
&dev_attr_statistics.attr,
&dev_attr_status.attr,
&dev_attr_temperature.attr,
- &dev_attr_tune.attr,
&dev_attr_tx_power.attr,
NULL
static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
int err = 0;
- u32 pci_id;
struct iwl3945_priv *priv;
struct ieee80211_hw *hw;
+ struct iwl_3945_cfg *cfg = (struct iwl_3945_cfg *)(ent->driver_data);
int i;
+ unsigned long flags;
+ DECLARE_MAC_BUF(mac);
+ /* Disabling hardware scan means that mac80211 will perform scans
+ * "the hard way", rather than using device's scan. */
if (iwl3945_param_disable_hw_scan) {
IWL_DEBUG_INFO("Disabling hw_scan\n");
iwl3945_hw_ops.hw_scan = NULL;
}
- if ((iwl3945_param_queues_num > IWL_MAX_NUM_QUEUES) ||
+ if ((iwl3945_param_queues_num > IWL39_MAX_NUM_QUEUES) ||
(iwl3945_param_queues_num < IWL_MIN_NUM_QUEUES)) {
IWL_ERROR("invalid queues_num, should be between %d and %d\n",
- IWL_MIN_NUM_QUEUES, IWL_MAX_NUM_QUEUES);
+ IWL_MIN_NUM_QUEUES, IWL39_MAX_NUM_QUEUES);
err = -EINVAL;
goto out;
}
priv->hw = hw;
priv->pci_dev = pdev;
+ priv->cfg = cfg;
+
+ /* Select antenna (may be helpful if only one antenna is connected) */
priv->antenna = (enum iwl3945_antenna)iwl3945_param_antenna;
#ifdef CONFIG_IWL3945_DEBUG
iwl3945_debug_level = iwl3945_param_debug;
priv->ibss_beacon = NULL;
- /* Tell mac80211 and its clients (e.g. Wireless Extensions)
- * the range of signal quality values that we'll provide.
- * Negative values for level/noise indicate that we'll provide dBm.
- * For WE, at least, non-0 values here *enable* display of values
- * in app (iwconfig). */
- hw->max_rssi = -20; /* signal level, negative indicates dBm */
- hw->max_noise = -20; /* noise level, negative indicates dBm */
- hw->max_signal = 100; /* link quality indication (%) */
-
- /* Tell mac80211 our Tx characteristics */
- hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE;
+ /* Tell mac80211 our characteristics */
+ hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
+ IEEE80211_HW_SIGNAL_DBM |
+ IEEE80211_HW_NOISE_DBM;
+ /* 4 EDCA QOS priorities */
hw->queues = 4;
spin_lock_init(&priv->lock);
pci_set_master(pdev);
+ /* Clear the driver's (not device's) station table */
iwl3945_clear_stations_table(priv);
priv->data_retry_limit = -1;
priv->ieee_channels = NULL;
priv->ieee_rates = NULL;
- priv->phymode = -1;
+ priv->band = IEEE80211_BAND_2GHZ;
err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
if (!err)
err = pci_request_regions(pdev, DRV_NAME);
if (err)
goto out_pci_disable_device;
+
/* We disable the RETRY_TIMEOUT register (0x41) to keep
* PCI Tx retries from interfering with C3 CPU state */
pci_write_config_byte(pdev, 0x41, 0x00);
+
priv->hw_base = pci_iomap(pdev, 0, 0);
if (!priv->hw_base) {
err = -ENODEV;
/* Initialize module parameter values here */
+ /* Disable radio (SW RF KILL) via parameter when loading driver */
if (iwl3945_param_disable) {
set_bit(STATUS_RF_KILL_SW, &priv->status);
IWL_DEBUG_INFO("Radio disabled.\n");
priv->iw_mode = IEEE80211_IF_TYPE_STA;
- pci_id =
- (priv->pci_dev->device << 16) | priv->pci_dev->subsystem_device;
-
- switch (pci_id) {
- case 0x42221005: /* 0x4222 0x8086 0x1005 is BG SKU */
- case 0x42221034: /* 0x4222 0x8086 0x1034 is BG SKU */
- case 0x42271014: /* 0x4227 0x8086 0x1014 is BG SKU */
- case 0x42221044: /* 0x4222 0x8086 0x1044 is BG SKU */
- priv->is_abg = 0;
- break;
-
- /*
- * Rest are assumed ABG SKU -- if this is not the
- * case then the card will get the wrong 'Detected'
- * line in the kernel log however the code that
- * initializes the GEO table will detect no A-band
- * channels and remove the is_abg mask.
- */
- default:
- priv->is_abg = 1;
- break;
- }
-
printk(KERN_INFO DRV_NAME
- ": Detected Intel PRO/Wireless 3945%sBG Network Connection\n",
- priv->is_abg ? "A" : "");
+ ": Detected Intel Wireless WiFi Link %s\n", priv->cfg->name);
/* Device-specific setup */
if (iwl3945_hw_set_hw_setting(priv)) {
IWL_ERROR("failed to set hw settings\n");
- mutex_unlock(&priv->mutex);
goto out_iounmap;
}
-#ifdef CONFIG_IWL3945_QOS
if (iwl3945_param_qos_enable)
priv->qos_data.qos_enable = 1;
priv->qos_data.qos_active = 0;
priv->qos_data.qos_cap.val = 0;
-#endif /* CONFIG_IWL3945_QOS */
- iwl3945_set_rxon_channel(priv, MODE_IEEE80211G, 6);
+ iwl3945_set_rxon_channel(priv, IEEE80211_BAND_2GHZ, 6);
iwl3945_setup_deferred_work(priv);
iwl3945_setup_rx_handlers(priv);
priv->power_mode = IWL_POWER_AC;
priv->user_txpower_limit = IWL_DEFAULT_TX_POWER;
+ spin_lock_irqsave(&priv->lock, flags);
iwl3945_disable_interrupts(priv);
-
- pci_enable_msi(pdev);
-
- err = request_irq(pdev->irq, iwl3945_isr, IRQF_SHARED, DRV_NAME, priv);
- if (err) {
- IWL_ERROR("Error allocating IRQ %d\n", pdev->irq);
- goto out_disable_msi;
- }
-
- mutex_lock(&priv->mutex);
+ spin_unlock_irqrestore(&priv->lock, flags);
err = sysfs_create_group(&pdev->dev.kobj, &iwl3945_attribute_group);
if (err) {
IWL_ERROR("failed to create sysfs device attributes\n");
- mutex_unlock(&priv->mutex);
goto out_release_irq;
}
- /* fetch ucode file from disk, alloc and copy to bus-master buffers ...
- * ucode filename and max sizes are card-specific. */
- err = iwl3945_read_ucode(priv);
+ /* nic init */
+ iwl3945_set_bit(priv, CSR_GIO_CHICKEN_BITS,
+ CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER);
+
+ iwl3945_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
+ err = iwl3945_poll_bit(priv, CSR_GP_CNTRL,
+ CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
+ CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
+ if (err < 0) {
+ IWL_DEBUG_INFO("Failed to init the card\n");
+ goto out_remove_sysfs;
+ }
+ /* Read the EEPROM */
+ err = iwl3945_eeprom_init(priv);
if (err) {
- IWL_ERROR("Could not read microcode: %d\n", err);
- mutex_unlock(&priv->mutex);
- goto out_pci_alloc;
+ IWL_ERROR("Unable to init EEPROM\n");
+ goto out_remove_sysfs;
}
+ /* MAC Address location in EEPROM same for 3945/4965 */
+ get_eeprom_mac(priv, priv->mac_addr);
+ IWL_DEBUG_INFO("MAC address: %s\n", print_mac(mac, priv->mac_addr));
+ SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr);
- mutex_unlock(&priv->mutex);
+ err = iwl3945_init_channel_map(priv);
+ if (err) {
+ IWL_ERROR("initializing regulatory failed: %d\n", err);
+ goto out_remove_sysfs;
+ }
- IWL_DEBUG_INFO("Queueing UP work.\n");
+ err = iwl3945_init_geos(priv);
+ if (err) {
+ IWL_ERROR("initializing geos failed: %d\n", err);
+ goto out_free_channel_map;
+ }
- queue_work(priv->workqueue, &priv->up);
+ err = ieee80211_register_hw(priv->hw);
+ if (err) {
+ IWL_ERROR("Failed to register network device (error %d)\n", err);
+ goto out_free_geos;
+ }
- return 0;
+ priv->hw->conf.beacon_int = 100;
+ priv->mac80211_registered = 1;
+ pci_save_state(pdev);
+ pci_disable_device(pdev);
- out_pci_alloc:
- iwl3945_dealloc_ucode_pci(priv);
+ return 0;
+ out_free_geos:
+ iwl3945_free_geos(priv);
+ out_free_channel_map:
+ iwl3945_free_channel_map(priv);
+ out_remove_sysfs:
sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group);
out_release_irq:
- free_irq(pdev->irq, priv);
-
- out_disable_msi:
- pci_disable_msi(pdev);
destroy_workqueue(priv->workqueue);
priv->workqueue = NULL;
iwl3945_unset_hw_setting(priv);
return err;
}
-static void iwl3945_pci_remove(struct pci_dev *pdev)
+static void __devexit iwl3945_pci_remove(struct pci_dev *pdev)
{
struct iwl3945_priv *priv = pci_get_drvdata(pdev);
struct list_head *p, *q;
int i;
+ unsigned long flags;
if (!priv)
return;
iwl3945_down(priv);
+ /* make sure we flush any pending irq or
+ * tasklet for the driver
+ */
+ spin_lock_irqsave(&priv->lock, flags);
+ iwl3945_disable_interrupts(priv);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ iwl_synchronize_irq(priv);
+
/* Free MAC hash list for ADHOC */
for (i = 0; i < IWL_IBSS_MAC_HASH_SIZE; i++) {
list_for_each_safe(p, q, &priv->ibss_mac_hash[i]) {
if (priv->mac80211_registered) {
ieee80211_unregister_hw(priv->hw);
- iwl3945_rate_control_unregister(priv->hw);
}
/*netif_stop_queue(dev); */
destroy_workqueue(priv->workqueue);
priv->workqueue = NULL;
- free_irq(pdev->irq, priv);
- pci_disable_msi(pdev);
pci_iounmap(pdev, priv->hw_base);
pci_release_regions(pdev);
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
- kfree(priv->channel_info);
-
- kfree(priv->ieee_channels);
- kfree(priv->ieee_rates);
-
+ iwl3945_free_channel_map(priv);
+ iwl3945_free_geos(priv);
+ kfree(priv->scan);
if (priv->ibss_beacon)
dev_kfree_skb(priv->ibss_beacon);
{
struct iwl3945_priv *priv = pci_get_drvdata(pdev);
- set_bit(STATUS_IN_SUSPEND, &priv->status);
-
- /* Take down the device; powers it off, etc. */
- iwl3945_down(priv);
-
- if (priv->mac80211_registered)
- ieee80211_stop_queues(priv->hw);
+ if (priv->is_open) {
+ set_bit(STATUS_IN_SUSPEND, &priv->status);
+ iwl3945_mac_stop(priv->hw);
+ priv->is_open = 1;
+ }
- pci_save_state(pdev);
- pci_disable_device(pdev);
pci_set_power_state(pdev, PCI_D3hot);
return 0;
}
-static void iwl3945_resume(struct iwl3945_priv *priv)
-{
- unsigned long flags;
-
- /* The following it a temporary work around due to the
- * suspend / resume not fully initializing the NIC correctly.
- * Without all of the following, resume will not attempt to take
- * down the NIC (it shouldn't really need to) and will just try
- * and bring the NIC back up. However that fails during the
- * ucode verification process. This then causes iwl3945_down to be
- * called *after* iwl3945_hw_nic_init() has succeeded -- which
- * then lets the next init sequence succeed. So, we've
- * replicated all of that NIC init code here... */
-
- iwl3945_write32(priv, CSR_INT, 0xFFFFFFFF);
-
- iwl3945_hw_nic_init(priv);
-
- iwl3945_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
- iwl3945_write32(priv, CSR_UCODE_DRV_GP1_CLR,
- CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
- iwl3945_write32(priv, CSR_INT, 0xFFFFFFFF);
- iwl3945_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
- iwl3945_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
-
- /* tell the device to stop sending interrupts */
- iwl3945_disable_interrupts(priv);
-
- spin_lock_irqsave(&priv->lock, flags);
- iwl3945_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
-
- if (!iwl3945_grab_nic_access(priv)) {
- iwl3945_write_prph(priv, APMG_CLK_DIS_REG,
- APMG_CLK_VAL_DMA_CLK_RQT);
- iwl3945_release_nic_access(priv);
- }
- spin_unlock_irqrestore(&priv->lock, flags);
-
- udelay(5);
-
- iwl3945_hw_nic_reset(priv);
-
- /* Bring the device back up */
- clear_bit(STATUS_IN_SUSPEND, &priv->status);
- queue_work(priv->workqueue, &priv->up);
-}
-
static int iwl3945_pci_resume(struct pci_dev *pdev)
{
struct iwl3945_priv *priv = pci_get_drvdata(pdev);
- int err;
-
- printk(KERN_INFO "Coming out of suspend...\n");
pci_set_power_state(pdev, PCI_D0);
- err = pci_enable_device(pdev);
- pci_restore_state(pdev);
-
- /*
- * Suspend/Resume resets the PCI configuration space, so we have to
- * re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries
- * from interfering with C3 CPU state. pci_restore_state won't help
- * here since it only restores the first 64 bytes pci config header.
- */
- pci_write_config_byte(pdev, 0x41, 0x00);
- iwl3945_resume(priv);
+ if (priv->is_open)
+ iwl3945_mac_start(priv->hw);
+ clear_bit(STATUS_IN_SUSPEND, &priv->status);
return 0;
}
int ret;
printk(KERN_INFO DRV_NAME ": " DRV_DESCRIPTION ", " DRV_VERSION "\n");
printk(KERN_INFO DRV_NAME ": " DRV_COPYRIGHT "\n");
+
+ ret = iwl3945_rate_control_register();
+ if (ret) {
+ IWL_ERROR("Unable to register rate control algorithm: %d\n", ret);
+ return ret;
+ }
+
ret = pci_register_driver(&iwl3945_driver);
if (ret) {
IWL_ERROR("Unable to initialize PCI module\n");
- return ret;
+ goto error_register;
}
#ifdef CONFIG_IWL3945_DEBUG
ret = driver_create_file(&iwl3945_driver.driver, &driver_attr_debug_level);
if (ret) {
IWL_ERROR("Unable to create driver sysfs file\n");
- pci_unregister_driver(&iwl3945_driver);
- return ret;
+ goto error_debug;
}
#endif
return ret;
+
+#ifdef CONFIG_IWL3945_DEBUG
+error_debug:
+ pci_unregister_driver(&iwl3945_driver);
+#endif
+error_register:
+ iwl3945_rate_control_unregister();
+ return ret;
}
static void __exit iwl3945_exit(void)
driver_remove_file(&iwl3945_driver.driver, &driver_attr_debug_level);
#endif
pci_unregister_driver(&iwl3945_driver);
+ iwl3945_rate_control_unregister();
}
module_param_named(antenna, iwl3945_param_antenna, int, 0444);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff