iwlwifi: device tracing
[safe/jmp/linux-2.6] / drivers / net / wireless / iwlwifi / iwl-eeprom.h
index 05d4fc4..fee6f0c 100644 (file)
@@ -63,6 +63,8 @@
 #ifndef __iwl_eeprom_h__
 #define __iwl_eeprom_h__
 
+#include <net/mac80211.h>
+
 struct iwl_priv;
 
 /*
@@ -118,6 +120,30 @@ struct iwl_eeprom_channel {
        s8 max_power_avg;       /* max power (dBm) on this chnl, limit 31 */
 } __attribute__ ((packed));
 
+/**
+ * iwl_eeprom_enhanced_txpwr structure
+ *    This structure presents the enhanced regulatory tx power limit layout
+ *    in eeprom image
+ *    Enhanced regulatory tx power portion of eeprom image can be broken down
+ *    into individual structures; each one is 8 bytes in size and contain the
+ *    following information
+ * @chain_a_max_pwr: chain a max power in 1/2 dBm
+ * @chain_b_max_pwr: chain b max power in 1/2 dBm
+ * @chain_c_max_pwr: chain c max power in 1/2 dBm
+ * @mimo2_max_pwr: mimo2 max power in 1/2 dBm
+ * @mimo3_max_pwr: mimo3 max power in 1/2 dBm
+ *
+ */
+struct iwl_eeprom_enhanced_txpwr {
+       u16 reserved;
+       s8 chain_a_max;
+       s8 chain_b_max;
+       s8 chain_c_max;
+       s8 reserved1;
+       s8 mimo2_max;
+       s8 mimo3_max;
+} __attribute__ ((packed));
+
 /* 3945 Specific */
 #define EEPROM_3945_EEPROM_VERSION     (0x2f)
 
@@ -175,13 +201,78 @@ struct iwl_eeprom_channel {
 #define EEPROM_5000_REG_BAND_52_HT40_CHANNELS  ((0x92)\
                | INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 22  bytes */
 
+/* 6000 and up regulatory tx power - indirect access */
+/* max. elements per section */
+#define EEPROM_MAX_TXPOWER_SECTION_ELEMENTS    (8)
+#define EEPROM_TXPOWER_COMMON_HT40_INDEX       (2)
+
+/**
+ * Partition the enhanced tx power portion of eeprom image into
+ * 10 sections based on band, modulation, frequency and channel
+ *
+ * Section 1: all CCK channels
+ * Section 2: all 2.4 GHz OFDM (Legacy, HT and HT40 ) channels
+ * Section 3: all 5.2 GHz OFDM (Legacy, HT and HT40) channels
+ * Section 4: 2.4 GHz 20MHz channels: 1, 2, 10, 11. Both Legacy and HT
+ * Section 5: 2.4 GHz 40MHz channels: 1, 2, 6, 7, 9, (_above_)
+ * Section 6: 5.2 GHz 20MHz channels: 36, 64, 100, both Legacy and HT
+ * Section 7: 5.2 GHz 40MHz channels: 36, 60, 100 (_above_)
+ * Section 8: 2.4 GHz channel 13, Both Legacy and HT
+ * Section 9: 2.4 GHz channel 140, Both Legacy and HT
+ * Section 10: 2.4 GHz 40MHz channels: 132, 44 (_above_)
+ */
+/* 2.4 GHz band: CCK */
+#define EEPROM_LB_CCK_20_COMMON       ((0xAA)\
+               | INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 8 bytes */
+/* 2.4 GHz band: 20MHz-Legacy, 20MHz-HT, 40MHz-HT */
+#define EEPROM_LB_OFDM_COMMON       ((0xB2)\
+               | INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 24 bytes */
+/* 5.2 GHz band: 20MHz-Legacy, 20MHz-HT, 40MHz-HT */
+#define EEPROM_HB_OFDM_COMMON       ((0xCA)\
+               | INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 24 bytes */
+/* 2.4GHz band channels:
+ *     1Legacy, 1HT, 2Legacy, 2HT, 10Legacy, 10HT, 11Legacy, 11HT */
+#define EEPROM_LB_OFDM_20_BAND       ((0xE2)\
+               | INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 64 bytes */
+/* 2.4 GHz band HT40 channels: (1,+1) (2,+1) (6,+1) (7,+1) (9,+1) */
+#define EEPROM_LB_OFDM_HT40_BAND       ((0x122)\
+               | INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 40 bytes */
+/* 5.2GHz band channels: 36Legacy, 36HT, 64Legacy, 64HT, 100Legacy, 100HT */
+#define EEPROM_HB_OFDM_20_BAND       ((0x14A)\
+               | INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 48 bytes */
+/* 5.2 GHz band HT40 channels: (36,+1) (60,+1) (100,+1) */
+#define EEPROM_HB_OFDM_HT40_BAND       ((0x17A)\
+               | INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 24 bytes */
+/* 2.4 GHz band, channnel 13: Legacy, HT */
+#define EEPROM_LB_OFDM_20_CHANNEL_13       ((0x192)\
+               | INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 16 bytes */
+/* 5.2 GHz band, channnel 140: Legacy, HT */
+#define EEPROM_HB_OFDM_20_CHANNEL_140       ((0x1A2)\
+               | INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 16 bytes */
+/* 5.2 GHz band, HT40 channnels (132,+1) (44,+1) */
+#define EEPROM_HB_OFDM_HT40_BAND_1       ((0x1B2)\
+               | INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 16 bytes */
+
+
 /* 5050 Specific */
 #define EEPROM_5050_TX_POWER_VERSION    (4)
 #define EEPROM_5050_EEPROM_VERSION     (0x21E)
 
+/* 1000 Specific */
+#define EEPROM_1000_EEPROM_VERSION     (0x15C)
+
+/* 60x0 Specific */
+#define EEPROM_6000_EEPROM_VERSION     (0x434)
+
 /* OTP */
-#define OTP_LOWER_BLOCKS_TOTAL         (3)
-#define OTP_BLOCK_SIZE                 (0x400)
+/* lower blocks contain EEPROM image and calibration data */
+#define OTP_LOW_IMAGE_SIZE             (2 * 512 * sizeof(u16)) /* 2 KB */
+/* high blocks contain PAPD data */
+#define OTP_HIGH_IMAGE_SIZE_6x00        (6 * 512 * sizeof(u16)) /* 6 KB */
+#define OTP_HIGH_IMAGE_SIZE_1000        (0x200 * sizeof(u16)) /* 1024 bytes */
+#define OTP_MAX_LL_ITEMS_1000          (3)     /* OTP blocks for 1000 */
+#define OTP_MAX_LL_ITEMS_6x00          (4)     /* OTP blocks for 6x00 */
+#define OTP_MAX_LL_ITEMS_6x50          (7)     /* OTP blocks for 6x50 */
 
 /* 2.4 GHz */
 extern const u8 iwl_eeprom_band_1[14];
@@ -287,12 +378,10 @@ struct iwl_eeprom_calib_info {
 #define EEPROM_BOARD_PBA_NUMBER             (2*0x3B+1) /* 9  bytes */
 #define EEPROM_VERSION                      (2*0x44)   /* 2  bytes */
 #define EEPROM_SKU_CAP                      (2*0x45)   /* 1  bytes */
-#define EEPROM_LEDS_MODE                    (2*0x45+1) /* 1  bytes */
 #define EEPROM_OEM_MODE                     (2*0x46)   /* 2  bytes */
 #define EEPROM_WOWLAN_MODE                  (2*0x47)   /* 2  bytes */
 #define EEPROM_RADIO_CONFIG                 (2*0x48)   /* 2  bytes */
 #define EEPROM_3945_M_VERSION               (2*0x4A)   /* 1  bytes */
-#define EEPROM_ANTENNA_SWITCH_TYPE          (2*0x4A+1) /* 1  bytes */
 
 /* The following masks are to be applied on EEPROM_RADIO_CONFIG */
 #define EEPROM_RF_CFG_TYPE_MSK(x)   (x & 0x3)         /* bits 0-1   */
@@ -304,7 +393,12 @@ struct iwl_eeprom_calib_info {
 
 #define EEPROM_3945_RF_CFG_TYPE_MAX  0x0
 #define EEPROM_4965_RF_CFG_TYPE_MAX  0x1
-#define EEPROM_5000_RF_CFG_TYPE_MAX  0x3
+
+/* Radio Config for 5000 and up */
+#define EEPROM_RF_CONFIG_TYPE_R3x3     0x0
+#define EEPROM_RF_CONFIG_TYPE_R2x2     0x1
+#define EEPROM_RF_CONFIG_TYPE_R1x2     0x2
+#define EEPROM_RF_CONFIG_TYPE_MAX      0x3
 
 /*
  * Per-channel regulatory data.
@@ -383,6 +477,7 @@ struct iwl_eeprom_ops {
        void (*release_semaphore) (struct iwl_priv *priv);
        u16 (*calib_version) (struct iwl_priv *priv);
        const u8* (*query_addr) (const struct iwl_priv *priv, size_t offset);
+       void (*update_enhanced_txpower) (struct iwl_priv *priv);
 };
 
 
@@ -397,7 +492,7 @@ int iwlcore_eeprom_verify_signature(struct iwl_priv *priv);
 int iwlcore_eeprom_acquire_semaphore(struct iwl_priv *priv);
 void iwlcore_eeprom_release_semaphore(struct iwl_priv *priv);
 const u8 *iwlcore_eeprom_query_addr(const struct iwl_priv *priv, size_t offset);
-
+void iwlcore_eeprom_enhanced_txpower(struct iwl_priv *priv);
 int iwl_init_channel_map(struct iwl_priv *priv);
 void iwl_free_channel_map(struct iwl_priv *priv);
 const struct iwl_channel_info *iwl_get_channel_info(