iwlwifi: remove a parameter (dest) from *_fill_beacon_frame() methods.

[safe/jmp/linux-2.6] / drivers / net / wireless / iwlwifi / iwl-eeprom.h

diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.h b/drivers/net/wireless/iwlwifi/iwl-eeprom.h
index 56e0a07..603c84b 100644 (file)
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.h
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.h
@@ -25,7 +25,7 @@
  * in the file called LICENSE.GPL.
  *
  * Contact Information:
- * Tomas Winkler <tomas.winkler@intel.com>
+ *  Intel Linux Wireless <ilw@linux.intel.com>
  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  *
  * BSD LICENSE
@@ -68,17 +68,14 @@ struct iwl_priv;
 /*
  * EEPROM access time values:
  *
- * Driver initiates EEPROM read by writing byte address << 1 to CSR_EEPROM_REG,
- *   then clearing (with subsequent read/modify/write) CSR_EEPROM_REG bit
- *   CSR_EEPROM_REG_BIT_CMD (0x2).
+ * Driver initiates EEPROM read by writing byte address << 1 to CSR_EEPROM_REG.
  * Driver then polls CSR_EEPROM_REG for CSR_EEPROM_REG_READ_VALID_MSK (0x1).
  * When polling, wait 10 uSec between polling loops, up to a maximum 5000 uSec.
  * Driver reads 16-bit value from bits 31-16 of CSR_EEPROM_REG.
  */
 #define IWL_EEPROM_ACCESS_TIMEOUT      5000 /* uSec */
-#define IWL_EEPROM_ACCESS_DELAY                10   /* uSec */
 
-#define IWL_EEPROM_SEM_TIMEOUT                 10   /* milliseconds */
+#define IWL_EEPROM_SEM_TIMEOUT                 10   /* microseconds */
 #define IWL_EEPROM_SEM_RETRY_LIMIT     1000 /* number of attempts (not time) */
 
 
@@ -140,8 +137,14 @@ struct iwl_eeprom_channel {
 #define EEPROM_4965_BOARD_REVISION             (2*0x4F) /* 2 bytes */
 #define EEPROM_4965_BOARD_PBA                  (2*0x56+1) /* 9 bytes */
 
+/* 5000 Specific */
+#define EEPROM_5000_TX_POWER_VERSION    (4)
+#define EEPROM_5000_EEPROM_VERSION     (0x11A)
+
 /*5000 calibrations */
 #define EEPROM_5000_CALIB_ALL  (INDIRECT_ADDRESS | INDIRECT_CALIBRATION)
+#define EEPROM_5000_XTAL       ((2*0x128) | EEPROM_5000_CALIB_ALL)
+#define EEPROM_5000_TEMPERATURE ((2*0x12A) | EEPROM_5000_CALIB_ALL)
 
 /* 5000 links */
 #define EEPROM_5000_LINK_HOST             (2*0x64)
@@ -169,6 +172,9 @@ struct iwl_eeprom_channel {
 #define EEPROM_5000_REG_BAND_52_FAT_CHANNELS  ((0x92)\
                | INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 22  bytes */
 
+/* 5050 Specific */
+#define EEPROM_5050_TX_POWER_VERSION    (4)
+#define EEPROM_5050_EEPROM_VERSION     (0x21E)
 
 /* 2.4 GHz */
 extern const u8 iwl_eeprom_band_1[14];
@@ -291,6 +297,7 @@ struct iwl_eeprom_calib_info {
 
 #define EEPROM_3945_RF_CFG_TYPE_MAX  0x0
 #define EEPROM_4965_RF_CFG_TYPE_MAX  0x1
+#define EEPROM_5000_RF_CFG_TYPE_MAX  0x3
 
 /*
  * Per-channel regulatory data.
@@ -365,7 +372,7 @@ struct iwl_eeprom_ops {
        int (*verify_signature) (struct iwl_priv *priv);
        int (*acquire_semaphore) (struct iwl_priv *priv);
        void (*release_semaphore) (struct iwl_priv *priv);
-       int (*check_version) (struct iwl_priv *priv);
+       u16 (*calib_version) (struct iwl_priv *priv);
        const u8* (*query_addr) (const struct iwl_priv *priv, size_t offset);
 };