*
* GPL LICENSE SUMMARY
*
- * Copyright(c) 2008 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
*
* BSD LICENSE
*
- * Copyright(c) 2005 - 2009 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <net/mac80211.h>
145, 149, 153, 157, 161, 165
};
-static const u8 iwl_eeprom_band_6[] = { /* 2.4 FAT channel */
+static const u8 iwl_eeprom_band_6[] = { /* 2.4 ht40 channel */
1, 2, 3, 4, 5, 6, 7
};
-static const u8 iwl_eeprom_band_7[] = { /* 5.2 FAT channel */
+static const u8 iwl_eeprom_band_7[] = { /* 5.2 ht40 channel */
36, 44, 52, 60, 100, 108, 116, 124, 132, 149, 157
};
+/**
+ * struct iwl_txpwr_section: eeprom section information
+ * @offset: indirect address into eeprom image
+ * @count: number of "struct iwl_eeprom_enhanced_txpwr" in this section
+ * @band: band type for the section
+ * @is_common - true: common section, false: channel section
+ * @is_cck - true: cck section, false: not cck section
+ * @is_ht_40 - true: all channel in the section are HT40 channel,
+ * false: legacy or HT 20 MHz
+ * ignore if it is common section
+ * @iwl_eeprom_section_channel: channel array in the section,
+ * ignore if common section
+ */
+struct iwl_txpwr_section {
+ u32 offset;
+ u8 count;
+ enum ieee80211_band band;
+ bool is_common;
+ bool is_cck;
+ bool is_ht40;
+ u8 iwl_eeprom_section_channel[EEPROM_MAX_TXPOWER_SECTION_ELEMENTS];
+};
+
+/**
+ * section 1 - 3 are regulatory tx power apply to all channels based on
+ * modulation: CCK, OFDM
+ * Band: 2.4GHz, 5.2GHz
+ * section 4 - 10 are regulatory tx power apply to specified channels
+ * For example:
+ * 1L - Channel 1 Legacy
+ * 1HT - Channel 1 HT
+ * (1,+1) - Channel 1 HT40 "_above_"
+ *
+ * Section 1: all CCK channels
+ * Section 2: all 2.4 GHz OFDM (Legacy, HT and HT40) channels
+ * Section 3: all 5.2 GHz OFDM (Legacy, HT and HT40) channels
+ * Section 4: 2.4 GHz 20MHz channels: 1L, 1HT, 2L, 2HT, 10L, 10HT, 11L, 11HT
+ * Section 5: 2.4 GHz 40MHz channels: (1,+1) (2,+1) (6,+1) (7,+1) (9,+1)
+ * Section 6: 5.2 GHz 20MHz channels: 36L, 64L, 100L, 36HT, 64HT, 100HT
+ * Section 7: 5.2 GHz 40MHz channels: (36,+1) (60,+1) (100,+1)
+ * Section 8: 2.4 GHz channel: 13L, 13HT
+ * Section 9: 2.4 GHz channel: 140L, 140HT
+ * Section 10: 2.4 GHz 40MHz channels: (132,+1) (44,+1)
+ *
+ */
+static const struct iwl_txpwr_section enhinfo[] = {
+ { EEPROM_LB_CCK_20_COMMON, 1, IEEE80211_BAND_2GHZ, true, true, false },
+ { EEPROM_LB_OFDM_COMMON, 3, IEEE80211_BAND_2GHZ, true, false, false },
+ { EEPROM_HB_OFDM_COMMON, 3, IEEE80211_BAND_5GHZ, true, false, false },
+ { EEPROM_LB_OFDM_20_BAND, 8, IEEE80211_BAND_2GHZ,
+ false, false, false,
+ {1, 1, 2, 2, 10, 10, 11, 11 } },
+ { EEPROM_LB_OFDM_HT40_BAND, 5, IEEE80211_BAND_2GHZ,
+ false, false, true,
+ { 1, 2, 6, 7, 9 } },
+ { EEPROM_HB_OFDM_20_BAND, 6, IEEE80211_BAND_5GHZ,
+ false, false, false,
+ { 36, 64, 100, 36, 64, 100 } },
+ { EEPROM_HB_OFDM_HT40_BAND, 3, IEEE80211_BAND_5GHZ,
+ false, false, true,
+ { 36, 60, 100 } },
+ { EEPROM_LB_OFDM_20_CHANNEL_13, 2, IEEE80211_BAND_2GHZ,
+ false, false, false,
+ { 13, 13 } },
+ { EEPROM_HB_OFDM_20_CHANNEL_140, 2, IEEE80211_BAND_5GHZ,
+ false, false, false,
+ { 140, 140 } },
+ { EEPROM_HB_OFDM_HT40_BAND_1, 2, IEEE80211_BAND_5GHZ,
+ false, false, true,
+ { 132, 44 } },
+};
+
/******************************************************************************
*
* EEPROM related functions
int iwlcore_eeprom_verify_signature(struct iwl_priv *priv)
{
- u32 gp = iwl_read32(priv, CSR_EEPROM_GP);
- if ((gp & CSR_EEPROM_GP_VALID_MSK) == CSR_EEPROM_GP_BAD_SIGNATURE) {
- IWL_ERR(priv, "EEPROM not found, EEPROM_GP=0x%08x\n", gp);
- return -ENOENT;
+ u32 gp = iwl_read32(priv, CSR_EEPROM_GP) & CSR_EEPROM_GP_VALID_MSK;
+ int ret = 0;
+
+ IWL_DEBUG_INFO(priv, "EEPROM signature=0x%08x\n", gp);
+ switch (gp) {
+ case CSR_EEPROM_GP_BAD_SIG_EEP_GOOD_SIG_OTP:
+ if (priv->nvm_device_type != NVM_DEVICE_TYPE_OTP) {
+ IWL_ERR(priv, "EEPROM with bad signature: 0x%08x\n",
+ gp);
+ ret = -ENOENT;
+ }
+ break;
+ case CSR_EEPROM_GP_GOOD_SIG_EEP_LESS_THAN_4K:
+ case CSR_EEPROM_GP_GOOD_SIG_EEP_MORE_THAN_4K:
+ if (priv->nvm_device_type != NVM_DEVICE_TYPE_EEPROM) {
+ IWL_ERR(priv, "OTP with bad signature: 0x%08x\n", gp);
+ ret = -ENOENT;
+ }
+ break;
+ case CSR_EEPROM_GP_BAD_SIGNATURE_BOTH_EEP_AND_OTP:
+ default:
+ IWL_ERR(priv, "bad EEPROM/OTP signature, type=%s, "
+ "EEPROM_GP=0x%08x\n",
+ (priv->nvm_device_type == NVM_DEVICE_TYPE_OTP)
+ ? "OTP" : "EEPROM", gp);
+ ret = -ENOENT;
+ break;
}
- return 0;
+ return ret;
}
EXPORT_SYMBOL(iwlcore_eeprom_verify_signature);
+static void iwl_set_otp_access(struct iwl_priv *priv, enum iwl_access_mode mode)
+{
+ u32 otpgp;
+
+ otpgp = iwl_read32(priv, CSR_OTP_GP_REG);
+ if (mode == IWL_OTP_ACCESS_ABSOLUTE)
+ iwl_clear_bit(priv, CSR_OTP_GP_REG,
+ CSR_OTP_GP_REG_OTP_ACCESS_MODE);
+ else
+ iwl_set_bit(priv, CSR_OTP_GP_REG,
+ CSR_OTP_GP_REG_OTP_ACCESS_MODE);
+}
+
+static int iwlcore_get_nvm_type(struct iwl_priv *priv)
+{
+ u32 otpgp;
+ int nvm_type;
+
+ /* OTP only valid for CP/PP and after */
+ switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) {
+ case CSR_HW_REV_TYPE_NONE:
+ IWL_ERR(priv, "Unknown hardware type\n");
+ return -ENOENT;
+ case CSR_HW_REV_TYPE_3945:
+ case CSR_HW_REV_TYPE_4965:
+ case CSR_HW_REV_TYPE_5300:
+ case CSR_HW_REV_TYPE_5350:
+ case CSR_HW_REV_TYPE_5100:
+ case CSR_HW_REV_TYPE_5150:
+ nvm_type = NVM_DEVICE_TYPE_EEPROM;
+ break;
+ default:
+ otpgp = iwl_read32(priv, CSR_OTP_GP_REG);
+ if (otpgp & CSR_OTP_GP_REG_DEVICE_SELECT)
+ nvm_type = NVM_DEVICE_TYPE_OTP;
+ else
+ nvm_type = NVM_DEVICE_TYPE_EEPROM;
+ break;
+ }
+ return nvm_type;
+}
+
/*
* The device's EEPROM semaphore prevents conflicts between driver and uCode
* when accessing the EEPROM; each access is a series of pulses to/from the
CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM);
/* See if we got it */
- ret = iwl_poll_direct_bit(priv, CSR_HW_IF_CONFIG_REG,
+ ret = iwl_poll_bit(priv, CSR_HW_IF_CONFIG_REG,
+ CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM,
CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM,
EEPROM_SEM_TIMEOUT);
if (ret >= 0) {
- IWL_DEBUG_IO("Acquired semaphore after %d tries.\n",
+ IWL_DEBUG_IO(priv, "Acquired semaphore after %d tries.\n",
count+1);
return ret;
}
}
EXPORT_SYMBOL(iwlcore_eeprom_query_addr);
+static int iwl_init_otp_access(struct iwl_priv *priv)
+{
+ int ret;
+
+ /* Enable 40MHz radio clock */
+ _iwl_write32(priv, CSR_GP_CNTRL,
+ _iwl_read32(priv, CSR_GP_CNTRL) |
+ CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
+
+ /* wait for clock to be ready */
+ ret = iwl_poll_bit(priv, CSR_GP_CNTRL,
+ CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
+ CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
+ 25000);
+ if (ret < 0)
+ IWL_ERR(priv, "Time out access OTP\n");
+ else {
+ iwl_set_bits_prph(priv, APMG_PS_CTRL_REG,
+ APMG_PS_CTRL_VAL_RESET_REQ);
+ udelay(5);
+ iwl_clear_bits_prph(priv, APMG_PS_CTRL_REG,
+ APMG_PS_CTRL_VAL_RESET_REQ);
+
+ /*
+ * CSR auto clock gate disable bit -
+ * this is only applicable for HW with OTP shadow RAM
+ */
+ if (priv->cfg->shadow_ram_support)
+ iwl_set_bit(priv, CSR_DBG_LINK_PWR_MGMT_REG,
+ CSR_RESET_LINK_PWR_MGMT_DISABLED);
+ }
+ return ret;
+}
+
+static int iwl_read_otp_word(struct iwl_priv *priv, u16 addr, __le16 *eeprom_data)
+{
+ int ret = 0;
+ u32 r;
+ u32 otpgp;
+
+ _iwl_write32(priv, CSR_EEPROM_REG,
+ CSR_EEPROM_REG_MSK_ADDR & (addr << 1));
+ ret = iwl_poll_bit(priv, CSR_EEPROM_REG,
+ CSR_EEPROM_REG_READ_VALID_MSK,
+ CSR_EEPROM_REG_READ_VALID_MSK,
+ IWL_EEPROM_ACCESS_TIMEOUT);
+ if (ret < 0) {
+ IWL_ERR(priv, "Time out reading OTP[%d]\n", addr);
+ return ret;
+ }
+ r = _iwl_read_direct32(priv, CSR_EEPROM_REG);
+ /* check for ECC errors: */
+ otpgp = iwl_read32(priv, CSR_OTP_GP_REG);
+ if (otpgp & CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK) {
+ /* stop in this case */
+ /* set the uncorrectable OTP ECC bit for acknowledgement */
+ iwl_set_bit(priv, CSR_OTP_GP_REG,
+ CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK);
+ IWL_ERR(priv, "Uncorrectable OTP ECC error, abort OTP read\n");
+ return -EINVAL;
+ }
+ if (otpgp & CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK) {
+ /* continue in this case */
+ /* set the correctable OTP ECC bit for acknowledgement */
+ iwl_set_bit(priv, CSR_OTP_GP_REG,
+ CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK);
+ IWL_ERR(priv, "Correctable OTP ECC error, continue read\n");
+ }
+ *eeprom_data = cpu_to_le16(r >> 16);
+ return 0;
+}
+
+/*
+ * iwl_is_otp_empty: check for empty OTP
+ */
+static bool iwl_is_otp_empty(struct iwl_priv *priv)
+{
+ u16 next_link_addr = 0;
+ __le16 link_value;
+ bool is_empty = false;
+
+ /* locate the beginning of OTP link list */
+ if (!iwl_read_otp_word(priv, next_link_addr, &link_value)) {
+ if (!link_value) {
+ IWL_ERR(priv, "OTP is empty\n");
+ is_empty = true;
+ }
+ } else {
+ IWL_ERR(priv, "Unable to read first block of OTP list.\n");
+ is_empty = true;
+ }
+
+ return is_empty;
+}
+
+
+/*
+ * iwl_find_otp_image: find EEPROM image in OTP
+ * finding the OTP block that contains the EEPROM image.
+ * the last valid block on the link list (the block _before_ the last block)
+ * is the block we should read and used to configure the device.
+ * If all the available OTP blocks are full, the last block will be the block
+ * we should read and used to configure the device.
+ * only perform this operation if shadow RAM is disabled
+ */
+static int iwl_find_otp_image(struct iwl_priv *priv,
+ u16 *validblockaddr)
+{
+ u16 next_link_addr = 0, valid_addr;
+ __le16 link_value = 0;
+ int usedblocks = 0;
+
+ /* set addressing mode to absolute to traverse the link list */
+ iwl_set_otp_access(priv, IWL_OTP_ACCESS_ABSOLUTE);
+
+ /* checking for empty OTP or error */
+ if (iwl_is_otp_empty(priv))
+ return -EINVAL;
+
+ /*
+ * start traverse link list
+ * until reach the max number of OTP blocks
+ * different devices have different number of OTP blocks
+ */
+ do {
+ /* save current valid block address
+ * check for more block on the link list
+ */
+ valid_addr = next_link_addr;
+ next_link_addr = le16_to_cpu(link_value) * sizeof(u16);
+ IWL_DEBUG_INFO(priv, "OTP blocks %d addr 0x%x\n",
+ usedblocks, next_link_addr);
+ if (iwl_read_otp_word(priv, next_link_addr, &link_value))
+ return -EINVAL;
+ if (!link_value) {
+ /*
+ * reach the end of link list, return success and
+ * set address point to the starting address
+ * of the image
+ */
+ *validblockaddr = valid_addr;
+ /* skip first 2 bytes (link list pointer) */
+ *validblockaddr += 2;
+ return 0;
+ }
+ /* more in the link list, continue */
+ usedblocks++;
+ } while (usedblocks <= priv->cfg->max_ll_items);
+
+ /* OTP has no valid blocks */
+ IWL_DEBUG_INFO(priv, "OTP has no valid blocks\n");
+ return -EINVAL;
+}
+
/**
* iwl_eeprom_init - read EEPROM contents
*
*/
int iwl_eeprom_init(struct iwl_priv *priv)
{
- u16 *e;
+ __le16 *e;
u32 gp = iwl_read32(priv, CSR_EEPROM_GP);
- int sz = priv->cfg->eeprom_size;
+ int sz;
int ret;
u16 addr;
+ u16 validblockaddr = 0;
+ u16 cache_addr = 0;
+ priv->nvm_device_type = iwlcore_get_nvm_type(priv);
+ if (priv->nvm_device_type == -ENOENT)
+ return -ENOENT;
/* allocate eeprom */
+ IWL_DEBUG_INFO(priv, "NVM size = %d\n", priv->cfg->eeprom_size);
+ sz = priv->cfg->eeprom_size;
priv->eeprom = kzalloc(sz, GFP_KERNEL);
if (!priv->eeprom) {
ret = -ENOMEM;
goto alloc_err;
}
- e = (u16 *)priv->eeprom;
+ e = (__le16 *)priv->eeprom;
+
+ priv->cfg->ops->lib->apm_ops.init(priv);
ret = priv->cfg->ops->lib->eeprom_ops.verify_signature(priv);
if (ret < 0) {
goto err;
}
- /* eeprom is an array of 16bit values */
- for (addr = 0; addr < sz; addr += sizeof(u16)) {
- u32 r;
+ if (priv->nvm_device_type == NVM_DEVICE_TYPE_OTP) {
- _iwl_write32(priv, CSR_EEPROM_REG,
- CSR_EEPROM_REG_MSK_ADDR & (addr << 1));
-
- ret = iwl_poll_direct_bit(priv, CSR_EEPROM_REG,
- CSR_EEPROM_REG_READ_VALID_MSK,
- IWL_EEPROM_ACCESS_TIMEOUT);
- if (ret < 0) {
- IWL_ERR(priv, "Time out reading EEPROM[%d]\n", addr);
+ ret = iwl_init_otp_access(priv);
+ if (ret) {
+ IWL_ERR(priv, "Failed to initialize OTP access.\n");
+ ret = -ENOENT;
goto done;
}
- r = _iwl_read_direct32(priv, CSR_EEPROM_REG);
- e[addr / 2] = le16_to_cpu((__force __le16)(r >> 16));
+ _iwl_write32(priv, CSR_EEPROM_GP,
+ iwl_read32(priv, CSR_EEPROM_GP) &
+ ~CSR_EEPROM_GP_IF_OWNER_MSK);
+
+ iwl_set_bit(priv, CSR_OTP_GP_REG,
+ CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK |
+ CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK);
+ /* traversing the linked list if no shadow ram supported */
+ if (!priv->cfg->shadow_ram_support) {
+ if (iwl_find_otp_image(priv, &validblockaddr)) {
+ ret = -ENOENT;
+ goto done;
+ }
+ }
+ for (addr = validblockaddr; addr < validblockaddr + sz;
+ addr += sizeof(u16)) {
+ __le16 eeprom_data;
+
+ ret = iwl_read_otp_word(priv, addr, &eeprom_data);
+ if (ret)
+ goto done;
+ e[cache_addr / 2] = eeprom_data;
+ cache_addr += sizeof(u16);
+ }
+ } else {
+ /* eeprom is an array of 16bit values */
+ for (addr = 0; addr < sz; addr += sizeof(u16)) {
+ u32 r;
+
+ _iwl_write32(priv, CSR_EEPROM_REG,
+ CSR_EEPROM_REG_MSK_ADDR & (addr << 1));
+
+ ret = iwl_poll_bit(priv, CSR_EEPROM_REG,
+ CSR_EEPROM_REG_READ_VALID_MSK,
+ CSR_EEPROM_REG_READ_VALID_MSK,
+ IWL_EEPROM_ACCESS_TIMEOUT);
+ if (ret < 0) {
+ IWL_ERR(priv, "Time out reading EEPROM[%d]\n", addr);
+ goto done;
+ }
+ r = _iwl_read_direct32(priv, CSR_EEPROM_REG);
+ e[addr / 2] = cpu_to_le16(r >> 16);
+ }
}
+
+ IWL_DEBUG_INFO(priv, "NVM Type: %s, version: 0x%x\n",
+ (priv->nvm_device_type == NVM_DEVICE_TYPE_OTP)
+ ? "OTP" : "EEPROM",
+ iwl_eeprom_query16(priv, EEPROM_VERSION));
+
ret = 0;
done:
priv->cfg->ops->lib->eeprom_ops.release_semaphore(priv);
+
err:
if (ret)
- kfree(priv->eeprom);
+ iwl_eeprom_free(priv);
+ /* Reset chip to save power until we load uCode during "up". */
+ priv->cfg->ops->lib->apm_ops.stop(priv);
alloc_err:
return ret;
}
return 0;
err:
- IWL_ERR(priv, "Unsupported EEPROM VER=0x%x < 0x%x CALIB=0x%x < 0x%x\n",
+ IWL_ERR(priv, "Unsupported (too old) EEPROM VER=0x%x < 0x%x CALIB=0x%x < 0x%x\n",
eeprom_ver, priv->cfg->eeprom_ver,
calib_ver, priv->cfg->eeprom_calib_ver);
return -EINVAL;
u16 iwl_eeprom_query16(const struct iwl_priv *priv, size_t offset)
{
+ if (!priv->eeprom)
+ return 0;
return (u16)priv->eeprom[offset] | ((u16)priv->eeprom[offset + 1] << 8);
}
EXPORT_SYMBOL(iwl_eeprom_query16);
iwl_eeprom_query_addr(priv, offset);
*eeprom_ch_index = iwl_eeprom_band_5;
break;
- case 6: /* 2.4GHz FAT channels */
+ case 6: /* 2.4GHz ht40 channels */
*eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_6);
*eeprom_ch_info = (struct iwl_eeprom_channel *)
iwl_eeprom_query_addr(priv, offset);
*eeprom_ch_index = iwl_eeprom_band_6;
break;
- case 7: /* 5 GHz FAT channels */
+ case 7: /* 5 GHz ht40 channels */
*eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_7);
*eeprom_ch_info = (struct iwl_eeprom_channel *)
iwl_eeprom_query_addr(priv, offset);
? # x " " : "")
/**
- * iwl_set_fat_chan_info - Copy fat channel info into driver's priv.
+ * iwl_mod_ht40_chan_info - Copy ht40 channel info into driver's priv.
*
* Does not set up a command, or touch hardware.
*/
-static int iwl_set_fat_chan_info(struct iwl_priv *priv,
+static int iwl_mod_ht40_chan_info(struct iwl_priv *priv,
enum ieee80211_band band, u16 channel,
const struct iwl_eeprom_channel *eeprom_ch,
- u8 fat_extension_channel)
+ u8 clear_ht40_extension_channel)
{
struct iwl_channel_info *ch_info;
if (!is_channel_valid(ch_info))
return -1;
- IWL_DEBUG_INFO("FAT Ch. %d [%sGHz] %s%s%s%s%s(0x%02x %ddBm):"
+ IWL_DEBUG_INFO(priv, "HT40 Ch. %d [%sGHz] %s%s%s%s%s(0x%02x %ddBm):"
" Ad-Hoc %ssupported\n",
ch_info->channel,
is_channel_a_band(ch_info) ?
&& !(eeprom_ch->flags & EEPROM_CHANNEL_RADAR)) ?
"" : "not ");
- ch_info->fat_eeprom = *eeprom_ch;
- ch_info->fat_max_power_avg = eeprom_ch->max_power_avg;
- ch_info->fat_curr_txpow = eeprom_ch->max_power_avg;
- ch_info->fat_min_power = 0;
- ch_info->fat_scan_power = eeprom_ch->max_power_avg;
- ch_info->fat_flags = eeprom_ch->flags;
- ch_info->fat_extension_channel = fat_extension_channel;
+ ch_info->ht40_eeprom = *eeprom_ch;
+ ch_info->ht40_max_power_avg = eeprom_ch->max_power_avg;
+ ch_info->ht40_flags = eeprom_ch->flags;
+ if (eeprom_ch->flags & EEPROM_CHANNEL_VALID)
+ ch_info->ht40_extension_channel &= ~clear_ht40_extension_channel;
return 0;
}
+/**
+ * iwl_get_max_txpower_avg - get the highest tx power from all chains.
+ * find the highest tx power from all chains for the channel
+ */
+static s8 iwl_get_max_txpower_avg(struct iwl_priv *priv,
+ struct iwl_eeprom_enhanced_txpwr *enhanced_txpower,
+ int element, s8 *max_txpower_in_half_dbm)
+{
+ s8 max_txpower_avg = 0; /* (dBm) */
+
+ IWL_DEBUG_INFO(priv, "%d - "
+ "chain_a: %d dB chain_b: %d dB "
+ "chain_c: %d dB mimo2: %d dB mimo3: %d dB\n",
+ element,
+ enhanced_txpower[element].chain_a_max >> 1,
+ enhanced_txpower[element].chain_b_max >> 1,
+ enhanced_txpower[element].chain_c_max >> 1,
+ enhanced_txpower[element].mimo2_max >> 1,
+ enhanced_txpower[element].mimo3_max >> 1);
+ /* Take the highest tx power from any valid chains */
+ if ((priv->cfg->valid_tx_ant & ANT_A) &&
+ (enhanced_txpower[element].chain_a_max > max_txpower_avg))
+ max_txpower_avg = enhanced_txpower[element].chain_a_max;
+ if ((priv->cfg->valid_tx_ant & ANT_B) &&
+ (enhanced_txpower[element].chain_b_max > max_txpower_avg))
+ max_txpower_avg = enhanced_txpower[element].chain_b_max;
+ if ((priv->cfg->valid_tx_ant & ANT_C) &&
+ (enhanced_txpower[element].chain_c_max > max_txpower_avg))
+ max_txpower_avg = enhanced_txpower[element].chain_c_max;
+ if (((priv->cfg->valid_tx_ant == ANT_AB) |
+ (priv->cfg->valid_tx_ant == ANT_BC) |
+ (priv->cfg->valid_tx_ant == ANT_AC)) &&
+ (enhanced_txpower[element].mimo2_max > max_txpower_avg))
+ max_txpower_avg = enhanced_txpower[element].mimo2_max;
+ if ((priv->cfg->valid_tx_ant == ANT_ABC) &&
+ (enhanced_txpower[element].mimo3_max > max_txpower_avg))
+ max_txpower_avg = enhanced_txpower[element].mimo3_max;
+
+ /*
+ * max. tx power in EEPROM is in 1/2 dBm format
+ * convert from 1/2 dBm to dBm (round-up convert)
+ * but we also do not want to loss 1/2 dBm resolution which
+ * will impact performance
+ */
+ *max_txpower_in_half_dbm = max_txpower_avg;
+ return (max_txpower_avg & 0x01) + (max_txpower_avg >> 1);
+}
+
+/**
+ * iwl_update_common_txpower: update channel tx power
+ * update tx power per band based on EEPROM enhanced tx power info.
+ */
+static s8 iwl_update_common_txpower(struct iwl_priv *priv,
+ struct iwl_eeprom_enhanced_txpwr *enhanced_txpower,
+ int section, int element, s8 *max_txpower_in_half_dbm)
+{
+ struct iwl_channel_info *ch_info;
+ int ch;
+ bool is_ht40 = false;
+ s8 max_txpower_avg; /* (dBm) */
+
+ /* it is common section, contain all type (Legacy, HT and HT40)
+ * based on the element in the section to determine
+ * is it HT 40 or not
+ */
+ if (element == EEPROM_TXPOWER_COMMON_HT40_INDEX)
+ is_ht40 = true;
+ max_txpower_avg =
+ iwl_get_max_txpower_avg(priv, enhanced_txpower,
+ element, max_txpower_in_half_dbm);
+
+ ch_info = priv->channel_info;
+
+ for (ch = 0; ch < priv->channel_count; ch++) {
+ /* find matching band and update tx power if needed */
+ if ((ch_info->band == enhinfo[section].band) &&
+ (ch_info->max_power_avg < max_txpower_avg) &&
+ (!is_ht40)) {
+ /* Update regulatory-based run-time data */
+ ch_info->max_power_avg = ch_info->curr_txpow =
+ max_txpower_avg;
+ ch_info->scan_power = max_txpower_avg;
+ }
+ if ((ch_info->band == enhinfo[section].band) && is_ht40 &&
+ (ch_info->ht40_max_power_avg < max_txpower_avg)) {
+ /* Update regulatory-based run-time data */
+ ch_info->ht40_max_power_avg = max_txpower_avg;
+ }
+ ch_info++;
+ }
+ return max_txpower_avg;
+}
+
+/**
+ * iwl_update_channel_txpower: update channel tx power
+ * update channel tx power based on EEPROM enhanced tx power info.
+ */
+static s8 iwl_update_channel_txpower(struct iwl_priv *priv,
+ struct iwl_eeprom_enhanced_txpwr *enhanced_txpower,
+ int section, int element, s8 *max_txpower_in_half_dbm)
+{
+ struct iwl_channel_info *ch_info;
+ int ch;
+ u8 channel;
+ s8 max_txpower_avg; /* (dBm) */
+
+ channel = enhinfo[section].iwl_eeprom_section_channel[element];
+ max_txpower_avg =
+ iwl_get_max_txpower_avg(priv, enhanced_txpower,
+ element, max_txpower_in_half_dbm);
+
+ ch_info = priv->channel_info;
+ for (ch = 0; ch < priv->channel_count; ch++) {
+ /* find matching channel and update tx power if needed */
+ if (ch_info->channel == channel) {
+ if ((ch_info->max_power_avg < max_txpower_avg) &&
+ (!enhinfo[section].is_ht40)) {
+ /* Update regulatory-based run-time data */
+ ch_info->max_power_avg = max_txpower_avg;
+ ch_info->curr_txpow = max_txpower_avg;
+ ch_info->scan_power = max_txpower_avg;
+ }
+ if ((enhinfo[section].is_ht40) &&
+ (ch_info->ht40_max_power_avg < max_txpower_avg)) {
+ /* Update regulatory-based run-time data */
+ ch_info->ht40_max_power_avg = max_txpower_avg;
+ }
+ break;
+ }
+ ch_info++;
+ }
+ return max_txpower_avg;
+}
+
+/**
+ * iwlcore_eeprom_enhanced_txpower: process enhanced tx power info
+ */
+void iwlcore_eeprom_enhanced_txpower(struct iwl_priv *priv)
+{
+ int eeprom_section_count = 0;
+ int section, element;
+ struct iwl_eeprom_enhanced_txpwr *enhanced_txpower;
+ u32 offset;
+ s8 max_txpower_avg; /* (dBm) */
+ s8 max_txpower_in_half_dbm; /* (half-dBm) */
+
+ /* Loop through all the sections
+ * adjust bands and channel's max tx power
+ * Set the tx_power_user_lmt to the highest power
+ * supported by any channels and chains
+ */
+ for (section = 0; section < ARRAY_SIZE(enhinfo); section++) {
+ eeprom_section_count = enhinfo[section].count;
+ offset = enhinfo[section].offset;
+ enhanced_txpower = (struct iwl_eeprom_enhanced_txpwr *)
+ iwl_eeprom_query_addr(priv, offset);
+
+ /*
+ * check for valid entry -
+ * different version of EEPROM might contain different set
+ * of enhanced tx power table
+ * always check for valid entry before process
+ * the information
+ */
+ if (!enhanced_txpower->common || enhanced_txpower->reserved)
+ continue;
+
+ for (element = 0; element < eeprom_section_count; element++) {
+ if (enhinfo[section].is_common)
+ max_txpower_avg =
+ iwl_update_common_txpower(priv,
+ enhanced_txpower, section,
+ element,
+ &max_txpower_in_half_dbm);
+ else
+ max_txpower_avg =
+ iwl_update_channel_txpower(priv,
+ enhanced_txpower, section,
+ element,
+ &max_txpower_in_half_dbm);
+
+ /* Update the tx_power_user_lmt to the highest power
+ * supported by any channel */
+ if (max_txpower_avg > priv->tx_power_user_lmt)
+ priv->tx_power_user_lmt = max_txpower_avg;
+
+ /*
+ * Update the tx_power_lmt_in_half_dbm to
+ * the highest power supported by any channel
+ */
+ if (max_txpower_in_half_dbm >
+ priv->tx_power_lmt_in_half_dbm)
+ priv->tx_power_lmt_in_half_dbm =
+ max_txpower_in_half_dbm;
+ }
+ }
+}
+EXPORT_SYMBOL(iwlcore_eeprom_enhanced_txpower);
+
#define CHECK_AND_PRINT_I(x) ((eeprom_ch_info[ch].flags & EEPROM_CHANNEL_##x) \
? # x " " : "")
struct iwl_channel_info *ch_info;
if (priv->channel_count) {
- IWL_DEBUG_INFO("Channel map already initialized.\n");
+ IWL_DEBUG_INFO(priv, "Channel map already initialized.\n");
return 0;
}
- IWL_DEBUG_INFO("Initializing regulatory info from EEPROM\n");
+ IWL_DEBUG_INFO(priv, "Initializing regulatory info from EEPROM\n");
priv->channel_count =
ARRAY_SIZE(iwl_eeprom_band_1) +
ARRAY_SIZE(iwl_eeprom_band_4) +
ARRAY_SIZE(iwl_eeprom_band_5);
- IWL_DEBUG_INFO("Parsing data for %d channels.\n", priv->channel_count);
+ IWL_DEBUG_INFO(priv, "Parsing data for %d channels.\n", priv->channel_count);
priv->channel_info = kzalloc(sizeof(struct iwl_channel_info) *
priv->channel_count, GFP_KERNEL);
/* Copy the run-time flags so they are there even on
* invalid channels */
ch_info->flags = eeprom_ch_info[ch].flags;
- /* First write that fat is not enabled, and then enable
+ /* First write that ht40 is not enabled, and then enable
* one by one */
- ch_info->fat_extension_channel =
- (IEEE80211_CHAN_NO_FAT_ABOVE |
- IEEE80211_CHAN_NO_FAT_BELOW);
+ ch_info->ht40_extension_channel =
+ IEEE80211_CHAN_NO_HT40;
if (!(is_channel_valid(ch_info))) {
- IWL_DEBUG_INFO("Ch. %d Flags %x [%sGHz] - "
+ IWL_DEBUG_INFO(priv, "Ch. %d Flags %x [%sGHz] - "
"No traffic\n",
ch_info->channel,
ch_info->flags,
ch_info->scan_power = eeprom_ch_info[ch].max_power_avg;
ch_info->min_power = 0;
- IWL_DEBUG_INFO("Ch. %d [%sGHz] %s%s%s%s%s%s(0x%02x %ddBm):"
+ IWL_DEBUG_INFO(priv, "Ch. %d [%sGHz] %s%s%s%s%s%s(0x%02x %ddBm):"
" Ad-Hoc %ssupported\n",
ch_info->channel,
is_channel_a_band(ch_info) ?
}
}
- /* Check if we do have FAT channels */
- if (priv->cfg->ops->lib->eeprom_ops.regulatory_bands[5] >=
- priv->cfg->eeprom_size &&
- priv->cfg->ops->lib->eeprom_ops.regulatory_bands[6] >=
- priv->cfg->eeprom_size)
+ /* Check if we do have HT40 channels */
+ if (priv->cfg->ops->lib->eeprom_ops.regulatory_bands[5] ==
+ EEPROM_REGULATORY_BAND_NO_HT40 &&
+ priv->cfg->ops->lib->eeprom_ops.regulatory_bands[6] ==
+ EEPROM_REGULATORY_BAND_NO_HT40)
return 0;
- /* Two additional EEPROM bands for 2.4 and 5 GHz FAT channels */
+ /* Two additional EEPROM bands for 2.4 and 5 GHz HT40 channels */
for (band = 6; band <= 7; band++) {
enum ieee80211_band ieeeband;
- u8 fat_extension_chan;
iwl_init_band_reference(priv, band, &eeprom_ch_count,
&eeprom_ch_info, &eeprom_ch_index);
/* Loop through each band adding each of the channels */
for (ch = 0; ch < eeprom_ch_count; ch++) {
-
- if ((band == 6) &&
- ((eeprom_ch_index[ch] == 5) ||
- (eeprom_ch_index[ch] == 6) ||
- (eeprom_ch_index[ch] == 7)))
- /* both are allowed: above and below */
- fat_extension_chan = 0;
- else
- fat_extension_chan =
- IEEE80211_CHAN_NO_FAT_BELOW;
-
/* Set up driver's info for lower half */
- iwl_set_fat_chan_info(priv, ieeeband,
+ iwl_mod_ht40_chan_info(priv, ieeeband,
eeprom_ch_index[ch],
- &(eeprom_ch_info[ch]),
- fat_extension_chan);
+ &eeprom_ch_info[ch],
+ IEEE80211_CHAN_NO_HT40PLUS);
/* Set up driver's info for upper half */
- iwl_set_fat_chan_info(priv, ieeeband,
- (eeprom_ch_index[ch] + 4),
- &(eeprom_ch_info[ch]),
- IEEE80211_CHAN_NO_FAT_ABOVE);
+ iwl_mod_ht40_chan_info(priv, ieeeband,
+ eeprom_ch_index[ch] + 4,
+ &eeprom_ch_info[ch],
+ IEEE80211_CHAN_NO_HT40MINUS);
}
}
+ /* for newer device (6000 series and up)
+ * EEPROM contain enhanced tx power information
+ * driver need to process addition information
+ * to determine the max channel tx power limits
+ */
+ if (priv->cfg->ops->lib->eeprom_ops.update_enhanced_txpower)
+ priv->cfg->ops->lib->eeprom_ops.update_enhanced_txpower(priv);
+
return 0;
}
EXPORT_SYMBOL(iwl_init_channel_map);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff