*
* GPL LICENSE SUMMARY
*
- * Copyright(c) 2005 - 2008 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2009 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* in the file called LICENSE.GPL.
*
* Contact Information:
- * James P. Ketrenos <ipw2100-admin@linux.intel.com>
+ * Intel Linux Wireless <ilw@linux.intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
* BSD LICENSE
*
- * Copyright(c) 2005 - 2008 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2009 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* Please use iwl-dev.h for driver implementation definitions.
*/
-#ifndef __iwl4965_commands_h__
-#define __iwl4965_commands_h__
+#ifndef __iwl_commands_h__
+#define __iwl_commands_h__
+
+struct iwl_priv;
+
+/* uCode version contains 4 values: Major/Minor/API/Serial */
+#define IWL_UCODE_MAJOR(ver) (((ver) & 0xFF000000) >> 24)
+#define IWL_UCODE_MINOR(ver) (((ver) & 0x00FF0000) >> 16)
+#define IWL_UCODE_API(ver) (((ver) & 0x0000FF00) >> 8)
+#define IWL_UCODE_SERIAL(ver) ((ver) & 0x000000FF)
+
+
+/* Tx rates */
+#define IWL_CCK_RATES 4
+#define IWL_OFDM_RATES 8
+#define IWL_MAX_RATES (IWL_CCK_RATES + IWL_OFDM_RATES)
enum {
REPLY_ALIVE = 0x1,
REPLY_WEPKEY = 0x20,
/* RX, TX, LEDs */
+ REPLY_3945_RX = 0x1b, /* 3945 only */
REPLY_TX = 0x1c,
REPLY_RATE_SCALE = 0x47, /* 3945 only */
REPLY_LEDS_CMD = 0x48,
REPLY_TX_LINK_QUALITY_CMD = 0x4e, /* 4965 only */
/* WiMAX coexistence */
- COEX_PRIORITY_TABLE_CMD = 0x5a, /*5000 only */
+ COEX_PRIORITY_TABLE_CMD = 0x5a, /* for 5000 series and up */
COEX_MEDIUM_NOTIFICATION = 0x5b,
COEX_EVENT_CMD = 0x5c,
/* Calibration */
+ TEMPERATURE_NOTIFICATION = 0x62,
CALIBRATION_CFG_CMD = 0x65,
CALIBRATION_RES_NOTIFICATION = 0x66,
CALIBRATION_COMPLETE_NOTIFICATION = 0x67,
WHO_IS_AWAKE_NOTIFICATION = 0x94, /* not used */
/* Miscellaneous commands */
+ REPLY_TX_POWER_DBM_CMD = 0x95,
QUIET_NOTIFICATION = 0x96, /* not used */
REPLY_TX_PWR_TABLE_CMD = 0x97,
- REPLY_TX_POWER_DBM_CMD = 0x98,
+ REPLY_TX_POWER_DBM_CMD_V1 = 0x98, /* old version of API */
+ TX_ANT_CONFIGURATION_CMD = 0x98,
MEASURE_ABORT_NOTIFICATION = 0x99, /* not used */
- /* Bluetooth device coexistance config command */
+ /* Bluetooth device coexistence config command */
REPLY_BT_CONFIG = 0x9b,
/* Statistics */
#define QUEUE_TO_SEQ(q) (((q) & 0x1f) << 8)
#define SEQ_TO_INDEX(s) ((s) & 0xff)
#define INDEX_TO_SEQ(i) ((i) & 0xff)
-#define SEQ_HUGE_FRAME __constant_cpu_to_le16(0x4000)
-#define SEQ_RX_FRAME __constant_cpu_to_le16(0x8000)
+#define SEQ_HUGE_FRAME cpu_to_le16(0x4000)
+#define SEQ_RX_FRAME cpu_to_le16(0x8000)
/**
* struct iwl_cmd_header
u8 cmd; /* Command ID: REPLY_RXON, etc. */
u8 flags; /* 0:5 reserved, 6 abort, 7 internal */
/*
- * The driver sets up the sequence number to values of its chosing.
+ * The driver sets up the sequence number to values of its choosing.
* uCode does not use this value, but passes it back to the driver
* when sending the response to each driver-originated command, so
* the driver can match the response to the command. Since the values
u8 data[0];
} __attribute__ ((packed));
+
+/**
+ * struct iwl3945_tx_power
+ *
+ * Used in REPLY_TX_PWR_TABLE_CMD, REPLY_SCAN_CMD, REPLY_CHANNEL_SWITCH
+ *
+ * Each entry contains two values:
+ * 1) DSP gain (or sometimes called DSP attenuation). This is a fine-grained
+ * linear value that multiplies the output of the digital signal processor,
+ * before being sent to the analog radio.
+ * 2) Radio gain. This sets the analog gain of the radio Tx path.
+ * It is a coarser setting, and behaves in a logarithmic (dB) fashion.
+ *
+ * Driver obtains values from struct iwl3945_tx_power power_gain_table[][].
+ */
+struct iwl3945_tx_power {
+ u8 tx_gain; /* gain for analog radio */
+ u8 dsp_atten; /* gain for DSP */
+} __attribute__ ((packed));
+
/**
- * 4965 rate_n_flags bit fields
+ * struct iwl3945_power_per_rate
*
- * rate_n_flags format is used in following 4965 commands:
+ * Used in REPLY_TX_PWR_TABLE_CMD, REPLY_CHANNEL_SWITCH
+ */
+struct iwl3945_power_per_rate {
+ u8 rate; /* plcp */
+ struct iwl3945_tx_power tpc;
+ u8 reserved;
+} __attribute__ ((packed));
+
+/**
+ * iwlagn rate_n_flags bit fields
+ *
+ * rate_n_flags format is used in following iwlagn commands:
* REPLY_RX (response only)
+ * REPLY_RX_MPDU (response only)
* REPLY_TX (both command and response)
* REPLY_TX_LINK_QUALITY_CMD
*
* 6) 54 Mbps
* 7) 60 Mbps
*
- * 3: 0) Single stream (SISO)
+ * 4-3: 0) Single stream (SISO)
* 1) Dual stream (MIMO)
+ * 2) Triple stream (MIMO)
*
- * 5: Value of 0x20 in bits 7:0 indicates 6 Mbps FAT duplicate data
+ * 5: Value of 0x20 in bits 7:0 indicates 6 Mbps HT40 duplicate data
*
* Legacy OFDM rate format for bits 7:0 (bit 8 must be "0", bit 9 "0"):
* 3-0: 0xD) 6 Mbps
* 0x3) 54 Mbps
*
* Legacy CCK rate format for bits 7:0 (bit 8 must be "0", bit 9 "1"):
- * 3-0: 10) 1 Mbps
+ * 6-0: 10) 1 Mbps
* 20) 2 Mbps
* 55) 5.5 Mbps
* 110) 11 Mbps
*/
#define RATE_MCS_CODE_MSK 0x7
-#define RATE_MCS_MIMO_POS 3
-#define RATE_MCS_MIMO_MSK 0x8
+#define RATE_MCS_SPATIAL_POS 3
+#define RATE_MCS_SPATIAL_MSK 0x18
#define RATE_MCS_HT_DUP_POS 5
#define RATE_MCS_HT_DUP_MSK 0x20
#define RATE_MCS_GF_POS 10
#define RATE_MCS_GF_MSK 0x400
-/* Bit 11: (1) Use 40Mhz FAT chnl width, (0) use 20 MHz legacy chnl width */
-#define RATE_MCS_FAT_POS 11
-#define RATE_MCS_FAT_MSK 0x800
+/* Bit 11: (1) Use 40Mhz HT40 chnl width, (0) use 20 MHz legacy chnl width */
+#define RATE_MCS_HT40_POS 11
+#define RATE_MCS_HT40_MSK 0x800
-/* Bit 12: (1) Duplicate data on both 20MHz chnls. FAT (bit 11) must be set. */
+/* Bit 12: (1) Duplicate data on both 20MHz chnls. HT40 (bit 11) must be set. */
#define RATE_MCS_DUP_POS 12
#define RATE_MCS_DUP_MSK 0x1000
* 5350 has 3 transmitters
* bit14:16
*/
-#define RATE_MCS_ANT_POS 14
-#define RATE_MCS_ANT_A_MSK 0x04000
-#define RATE_MCS_ANT_B_MSK 0x08000
-#define RATE_MCS_ANT_C_MSK 0x10000
-#define RATE_MCS_ANT_ABC_MSK 0x1C000
+#define RATE_MCS_ANT_POS 14
+#define RATE_MCS_ANT_A_MSK 0x04000
+#define RATE_MCS_ANT_B_MSK 0x08000
+#define RATE_MCS_ANT_C_MSK 0x10000
+#define RATE_MCS_ANT_AB_MSK (RATE_MCS_ANT_A_MSK | RATE_MCS_ANT_B_MSK)
+#define RATE_MCS_ANT_ABC_MSK (RATE_MCS_ANT_AB_MSK | RATE_MCS_ANT_C_MSK)
#define RATE_ANT_NUM 3
#define POWER_TABLE_NUM_ENTRIES 33
#define POWER_TABLE_NUM_HT_OFDM_ENTRIES 32
#define POWER_TABLE_CCK_ENTRY 32
+#define IWL_PWR_NUM_HT_OFDM_ENTRIES 24
+#define IWL_PWR_CCK_ENTRIES 2
+
/**
* union iwl4965_tx_power_dual_stream
*
} __attribute__ ((packed));
/**
- * Commad REPLY_TX_POWER_DBM_CMD = 0x98
+ * Command REPLY_TX_POWER_DBM_CMD = 0x98
* struct iwl5000_tx_power_dbm_cmd
*/
#define IWL50_TX_POWER_AUTO 0x7f
u8 reserved;
} __attribute__ ((packed));
+/**
+ * Command TX_ANT_CONFIGURATION_CMD = 0x98
+ * This command is used to configure valid Tx antenna.
+ * By default uCode concludes the valid antenna according to the radio flavor.
+ * This command enables the driver to override/modify this conclusion.
+ */
+struct iwl_tx_ant_config_cmd {
+ __le32 valid;
+} __attribute__ ((packed));
+
/******************************************************************************
* (0a)
* Alive and Error Commands & Responses:
*
*****************************************************************************/
-#define UCODE_VALID_OK __constant_cpu_to_le32(0x1)
+#define UCODE_VALID_OK cpu_to_le32(0x1)
#define INITIALIZE_SUBTYPE (9)
/*
* calculating txpower settings:
*
* 1) Power supply voltage indication. The voltage sensor outputs higher
- * values for lower voltage, and vice versa.
+ * values for lower voltage, and vice verse.
*
* 2) Temperature measurement parameters, for each of two channel widths
* (20 MHz and 40 MHz) supported by the radios. Temperature sensing
/* calibration values from "initialize" uCode */
__le32 voltage; /* signed, higher value is lower voltage */
- __le32 therm_r1[2]; /* signed, 1st for normal, 2nd for FAT channel*/
+ __le32 therm_r1[2]; /* signed, 1st for normal, 2nd for HT40 */
__le32 therm_r2[2]; /* signed */
__le32 therm_r3[2]; /* signed */
__le32 therm_r4[2]; /* signed */
__le32 is_valid;
} __attribute__ ((packed));
-
-
/*
* REPLY_ERROR = 0x2 (response only, not a command)
*/
};
-#define RXON_RX_CHAIN_DRIVER_FORCE_MSK __constant_cpu_to_le16(0x1 << 0)
-#define RXON_RX_CHAIN_VALID_MSK __constant_cpu_to_le16(0x7 << 1)
+#define RXON_RX_CHAIN_DRIVER_FORCE_MSK cpu_to_le16(0x1 << 0)
+#define RXON_RX_CHAIN_DRIVER_FORCE_POS (0)
+#define RXON_RX_CHAIN_VALID_MSK cpu_to_le16(0x7 << 1)
#define RXON_RX_CHAIN_VALID_POS (1)
-#define RXON_RX_CHAIN_FORCE_SEL_MSK __constant_cpu_to_le16(0x7 << 4)
+#define RXON_RX_CHAIN_FORCE_SEL_MSK cpu_to_le16(0x7 << 4)
#define RXON_RX_CHAIN_FORCE_SEL_POS (4)
-#define RXON_RX_CHAIN_FORCE_MIMO_SEL_MSK __constant_cpu_to_le16(0x7 << 7)
+#define RXON_RX_CHAIN_FORCE_MIMO_SEL_MSK cpu_to_le16(0x7 << 7)
#define RXON_RX_CHAIN_FORCE_MIMO_SEL_POS (7)
-#define RXON_RX_CHAIN_CNT_MSK __constant_cpu_to_le16(0x3 << 10)
+#define RXON_RX_CHAIN_CNT_MSK cpu_to_le16(0x3 << 10)
#define RXON_RX_CHAIN_CNT_POS (10)
-#define RXON_RX_CHAIN_MIMO_CNT_MSK __constant_cpu_to_le16(0x3 << 12)
+#define RXON_RX_CHAIN_MIMO_CNT_MSK cpu_to_le16(0x3 << 12)
#define RXON_RX_CHAIN_MIMO_CNT_POS (12)
-#define RXON_RX_CHAIN_MIMO_FORCE_MSK __constant_cpu_to_le16(0x1 << 14)
+#define RXON_RX_CHAIN_MIMO_FORCE_MSK cpu_to_le16(0x1 << 14)
#define RXON_RX_CHAIN_MIMO_FORCE_POS (14)
/* rx_config flags */
/* band & modulation selection */
-#define RXON_FLG_BAND_24G_MSK __constant_cpu_to_le32(1 << 0)
-#define RXON_FLG_CCK_MSK __constant_cpu_to_le32(1 << 1)
+#define RXON_FLG_BAND_24G_MSK cpu_to_le32(1 << 0)
+#define RXON_FLG_CCK_MSK cpu_to_le32(1 << 1)
/* auto detection enable */
-#define RXON_FLG_AUTO_DETECT_MSK __constant_cpu_to_le32(1 << 2)
+#define RXON_FLG_AUTO_DETECT_MSK cpu_to_le32(1 << 2)
/* TGg protection when tx */
-#define RXON_FLG_TGG_PROTECT_MSK __constant_cpu_to_le32(1 << 3)
+#define RXON_FLG_TGG_PROTECT_MSK cpu_to_le32(1 << 3)
/* cck short slot & preamble */
-#define RXON_FLG_SHORT_SLOT_MSK __constant_cpu_to_le32(1 << 4)
-#define RXON_FLG_SHORT_PREAMBLE_MSK __constant_cpu_to_le32(1 << 5)
+#define RXON_FLG_SHORT_SLOT_MSK cpu_to_le32(1 << 4)
+#define RXON_FLG_SHORT_PREAMBLE_MSK cpu_to_le32(1 << 5)
/* antenna selection */
-#define RXON_FLG_DIS_DIV_MSK __constant_cpu_to_le32(1 << 7)
-#define RXON_FLG_ANT_SEL_MSK __constant_cpu_to_le32(0x0f00)
-#define RXON_FLG_ANT_A_MSK __constant_cpu_to_le32(1 << 8)
-#define RXON_FLG_ANT_B_MSK __constant_cpu_to_le32(1 << 9)
+#define RXON_FLG_DIS_DIV_MSK cpu_to_le32(1 << 7)
+#define RXON_FLG_ANT_SEL_MSK cpu_to_le32(0x0f00)
+#define RXON_FLG_ANT_A_MSK cpu_to_le32(1 << 8)
+#define RXON_FLG_ANT_B_MSK cpu_to_le32(1 << 9)
/* radar detection enable */
-#define RXON_FLG_RADAR_DETECT_MSK __constant_cpu_to_le32(1 << 12)
-#define RXON_FLG_TGJ_NARROW_BAND_MSK __constant_cpu_to_le32(1 << 13)
+#define RXON_FLG_RADAR_DETECT_MSK cpu_to_le32(1 << 12)
+#define RXON_FLG_TGJ_NARROW_BAND_MSK cpu_to_le32(1 << 13)
/* rx response to host with 8-byte TSF
* (according to ON_AIR deassertion) */
-#define RXON_FLG_TSF2HOST_MSK __constant_cpu_to_le32(1 << 15)
+#define RXON_FLG_TSF2HOST_MSK cpu_to_le32(1 << 15)
/* HT flags */
#define RXON_FLG_CTRL_CHANNEL_LOC_POS (22)
-#define RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK __constant_cpu_to_le32(0x1 << 22)
+#define RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK cpu_to_le32(0x1 << 22)
#define RXON_FLG_HT_OPERATING_MODE_POS (23)
-#define RXON_FLG_HT_PROT_MSK __constant_cpu_to_le32(0x1 << 23)
-#define RXON_FLG_FAT_PROT_MSK __constant_cpu_to_le32(0x2 << 23)
+#define RXON_FLG_HT_PROT_MSK cpu_to_le32(0x1 << 23)
+#define RXON_FLG_HT40_PROT_MSK cpu_to_le32(0x2 << 23)
#define RXON_FLG_CHANNEL_MODE_POS (25)
-#define RXON_FLG_CHANNEL_MODE_MSK __constant_cpu_to_le32(0x3 << 25)
-#define RXON_FLG_CHANNEL_MODE_PURE_40_MSK __constant_cpu_to_le32(0x1 << 25)
-#define RXON_FLG_CHANNEL_MODE_MIXED_MSK __constant_cpu_to_le32(0x2 << 25)
+#define RXON_FLG_CHANNEL_MODE_MSK cpu_to_le32(0x3 << 25)
+
+/* channel mode */
+enum {
+ CHANNEL_MODE_LEGACY = 0,
+ CHANNEL_MODE_PURE_40 = 1,
+ CHANNEL_MODE_MIXED = 2,
+ CHANNEL_MODE_RESERVED = 3,
+};
+#define RXON_FLG_CHANNEL_MODE_LEGACY cpu_to_le32(CHANNEL_MODE_LEGACY << RXON_FLG_CHANNEL_MODE_POS)
+#define RXON_FLG_CHANNEL_MODE_PURE_40 cpu_to_le32(CHANNEL_MODE_PURE_40 << RXON_FLG_CHANNEL_MODE_POS)
+#define RXON_FLG_CHANNEL_MODE_MIXED cpu_to_le32(CHANNEL_MODE_MIXED << RXON_FLG_CHANNEL_MODE_POS)
+
/* CTS to self (if spec allows) flag */
-#define RXON_FLG_SELF_CTS_EN __constant_cpu_to_le32(0x1<<30)
+#define RXON_FLG_SELF_CTS_EN cpu_to_le32(0x1<<30)
/* rx_config filter flags */
/* accept all data frames */
-#define RXON_FILTER_PROMISC_MSK __constant_cpu_to_le32(1 << 0)
+#define RXON_FILTER_PROMISC_MSK cpu_to_le32(1 << 0)
/* pass control & management to host */
-#define RXON_FILTER_CTL2HOST_MSK __constant_cpu_to_le32(1 << 1)
+#define RXON_FILTER_CTL2HOST_MSK cpu_to_le32(1 << 1)
/* accept multi-cast */
-#define RXON_FILTER_ACCEPT_GRP_MSK __constant_cpu_to_le32(1 << 2)
+#define RXON_FILTER_ACCEPT_GRP_MSK cpu_to_le32(1 << 2)
/* don't decrypt uni-cast frames */
-#define RXON_FILTER_DIS_DECRYPT_MSK __constant_cpu_to_le32(1 << 3)
+#define RXON_FILTER_DIS_DECRYPT_MSK cpu_to_le32(1 << 3)
/* don't decrypt multi-cast frames */
-#define RXON_FILTER_DIS_GRP_DECRYPT_MSK __constant_cpu_to_le32(1 << 4)
+#define RXON_FILTER_DIS_GRP_DECRYPT_MSK cpu_to_le32(1 << 4)
/* STA is associated */
-#define RXON_FILTER_ASSOC_MSK __constant_cpu_to_le32(1 << 5)
+#define RXON_FILTER_ASSOC_MSK cpu_to_le32(1 << 5)
/* transfer to host non bssid beacons in associated state */
-#define RXON_FILTER_BCON_AWARE_MSK __constant_cpu_to_le32(1 << 6)
+#define RXON_FILTER_BCON_AWARE_MSK cpu_to_le32(1 << 6)
/**
* REPLY_RXON = 0x10 (command, has simple generic response)
* issue a new REPLY_TX_PWR_TABLE_CMD after each REPLY_RXON (0x10),
* regardless of whether RXON_FILTER_ASSOC_MSK is set.
*/
+
+struct iwl3945_rxon_cmd {
+ u8 node_addr[6];
+ __le16 reserved1;
+ u8 bssid_addr[6];
+ __le16 reserved2;
+ u8 wlap_bssid_addr[6];
+ __le16 reserved3;
+ u8 dev_type;
+ u8 air_propagation;
+ __le16 reserved4;
+ u8 ofdm_basic_rates;
+ u8 cck_basic_rates;
+ __le16 assoc_id;
+ __le32 flags;
+ __le32 filter_flags;
+ __le16 channel;
+ __le16 reserved5;
+} __attribute__ ((packed));
+
struct iwl4965_rxon_cmd {
u8 node_addr[6];
__le16 reserved1;
u8 ofdm_ht_dual_stream_basic_rates;
} __attribute__ ((packed));
-/* 5000 HW just extend this cmmand */
+/* 5000 HW just extend this command */
struct iwl_rxon_cmd {
u8 node_addr[6];
__le16 reserved1;
__le16 reserved6;
} __attribute__ ((packed));
-struct iwl5000_rxon_assoc_cmd {
+/*
+ * REPLY_RXON_ASSOC = 0x11 (command, has simple generic response)
+ */
+struct iwl3945_rxon_assoc_cmd {
+ __le32 flags;
+ __le32 filter_flags;
+ u8 ofdm_basic_rates;
+ u8 cck_basic_rates;
+ __le16 reserved;
+} __attribute__ ((packed));
+
+struct iwl4965_rxon_assoc_cmd {
__le32 flags;
__le32 filter_flags;
u8 ofdm_basic_rates;
u8 cck_basic_rates;
- __le16 reserved1;
u8 ofdm_ht_single_stream_basic_rates;
u8 ofdm_ht_dual_stream_basic_rates;
- u8 ofdm_ht_triple_stream_basic_rates;
- u8 reserved2;
__le16 rx_chain_select_flags;
- __le16 acquisition_data;
- __le32 reserved3;
+ __le16 reserved;
} __attribute__ ((packed));
-/*
- * REPLY_RXON_ASSOC = 0x11 (command, has simple generic response)
- */
-struct iwl4965_rxon_assoc_cmd {
+struct iwl5000_rxon_assoc_cmd {
__le32 flags;
__le32 filter_flags;
u8 ofdm_basic_rates;
u8 cck_basic_rates;
+ __le16 reserved1;
u8 ofdm_ht_single_stream_basic_rates;
u8 ofdm_ht_dual_stream_basic_rates;
+ u8 ofdm_ht_triple_stream_basic_rates;
+ u8 reserved2;
__le16 rx_chain_select_flags;
- __le16 reserved;
+ __le16 acquisition_data;
+ __le32 reserved3;
} __attribute__ ((packed));
#define IWL_CONN_MAX_LISTEN_INTERVAL 10
+#define IWL_MAX_UCODE_BEACON_INTERVAL 4 /* 4096 */
+#define IWL39_MAX_UCODE_BEACON_INTERVAL 1 /* 1024 */
/*
* REPLY_RXON_TIMING = 0x14 (command, has simple generic response)
/*
* REPLY_CHANNEL_SWITCH = 0x72 (command, has simple generic response)
*/
+struct iwl3945_channel_switch_cmd {
+ u8 band;
+ u8 expect_beacon;
+ __le16 channel;
+ __le32 rxon_flags;
+ __le32 rxon_filter_flags;
+ __le32 switch_time;
+ struct iwl3945_power_per_rate power[IWL_MAX_RATES];
+} __attribute__ ((packed));
+
struct iwl4965_channel_switch_cmd {
u8 band;
u8 expect_beacon;
struct iwl4965_tx_power_db tx_power;
} __attribute__ ((packed));
+/**
+ * struct iwl5000_channel_switch_cmd
+ * @band: 0- 5.2GHz, 1- 2.4GHz
+ * @expect_beacon: 0- resume transmits after channel switch
+ * 1- wait for beacon to resume transmits
+ * @channel: new channel number
+ * @rxon_flags: Rx on flags
+ * @rxon_filter_flags: filtering parameters
+ * @switch_time: switch time in extended beacon format
+ * @reserved: reserved bytes
+ */
+struct iwl5000_channel_switch_cmd {
+ u8 band;
+ u8 expect_beacon;
+ __le16 channel;
+ __le32 rxon_flags;
+ __le32 rxon_filter_flags;
+ __le32 switch_time;
+ __le32 reserved[2][IWL_PWR_NUM_HT_OFDM_ENTRIES + IWL_PWR_CCK_ENTRIES];
+} __attribute__ ((packed));
+
+/**
+ * struct iwl6000_channel_switch_cmd
+ * @band: 0- 5.2GHz, 1- 2.4GHz
+ * @expect_beacon: 0- resume transmits after channel switch
+ * 1- wait for beacon to resume transmits
+ * @channel: new channel number
+ * @rxon_flags: Rx on flags
+ * @rxon_filter_flags: filtering parameters
+ * @switch_time: switch time in extended beacon format
+ * @reserved: reserved bytes
+ */
+struct iwl6000_channel_switch_cmd {
+ u8 band;
+ u8 expect_beacon;
+ __le16 channel;
+ __le32 rxon_flags;
+ __le32 rxon_filter_flags;
+ __le32 switch_time;
+ __le32 reserved[3][IWL_PWR_NUM_HT_OFDM_ENTRIES + IWL_PWR_CCK_ENTRIES];
+} __attribute__ ((packed));
+
/*
* CHANNEL_SWITCH_NOTIFICATION = 0x73 (notification only, not a command)
*/
-struct iwl4965_csa_notification {
+struct iwl_csa_notification {
__le16 band;
__le16 channel;
__le32 status; /* 0 - OK, 1 - fail */
} __attribute__ ((packed));
/* QoS flags defines */
-#define QOS_PARAM_FLG_UPDATE_EDCA_MSK __constant_cpu_to_le32(0x01)
-#define QOS_PARAM_FLG_TGN_MSK __constant_cpu_to_le32(0x02)
-#define QOS_PARAM_FLG_TXOP_TYPE_MSK __constant_cpu_to_le32(0x10)
+#define QOS_PARAM_FLG_UPDATE_EDCA_MSK cpu_to_le32(0x01)
+#define QOS_PARAM_FLG_TGN_MSK cpu_to_le32(0x02)
+#define QOS_PARAM_FLG_TXOP_TYPE_MSK cpu_to_le32(0x10)
/* Number of Access Categories (AC) (EDCA), queues 0..3 */
#define AC_NUM 4
#define IWL_AP_ID 0
#define IWL_MULTICAST_ID 1
#define IWL_STA_ID 2
+#define IWL3945_BROADCAST_ID 24
+#define IWL3945_STATION_COUNT 25
#define IWL4965_BROADCAST_ID 31
#define IWL4965_STATION_COUNT 32
#define IWL5000_BROADCAST_ID 15
#define IWL_STATION_COUNT 32 /* MAX(3945,4965)*/
#define IWL_INVALID_STATION 255
-#define STA_FLG_PWR_SAVE_MSK __constant_cpu_to_le32(1 << 8);
-#define STA_FLG_RTS_MIMO_PROT_MSK __constant_cpu_to_le32(1 << 17)
-#define STA_FLG_AGG_MPDU_8US_MSK __constant_cpu_to_le32(1 << 18)
+#define STA_FLG_TX_RATE_MSK cpu_to_le32(1 << 2);
+#define STA_FLG_PWR_SAVE_MSK cpu_to_le32(1 << 8);
+#define STA_FLG_RTS_MIMO_PROT_MSK cpu_to_le32(1 << 17)
+#define STA_FLG_AGG_MPDU_8US_MSK cpu_to_le32(1 << 18)
#define STA_FLG_MAX_AGG_SIZE_POS (19)
-#define STA_FLG_MAX_AGG_SIZE_MSK __constant_cpu_to_le32(3 << 19)
-#define STA_FLG_FAT_EN_MSK __constant_cpu_to_le32(1 << 21)
-#define STA_FLG_MIMO_DIS_MSK __constant_cpu_to_le32(1 << 22)
+#define STA_FLG_MAX_AGG_SIZE_MSK cpu_to_le32(3 << 19)
+#define STA_FLG_HT40_EN_MSK cpu_to_le32(1 << 21)
+#define STA_FLG_MIMO_DIS_MSK cpu_to_le32(1 << 22)
#define STA_FLG_AGG_MPDU_DENSITY_POS (23)
-#define STA_FLG_AGG_MPDU_DENSITY_MSK __constant_cpu_to_le32(7 << 23)
+#define STA_FLG_AGG_MPDU_DENSITY_MSK cpu_to_le32(7 << 23)
/* Use in mode field. 1: modify existing entry, 0: add new station entry */
#define STA_CONTROL_MODIFY_MSK 0x01
/* key flags __le16*/
-#define STA_KEY_FLG_ENCRYPT_MSK __constant_cpu_to_le16(0x0007)
-#define STA_KEY_FLG_NO_ENC __constant_cpu_to_le16(0x0000)
-#define STA_KEY_FLG_WEP __constant_cpu_to_le16(0x0001)
-#define STA_KEY_FLG_CCMP __constant_cpu_to_le16(0x0002)
-#define STA_KEY_FLG_TKIP __constant_cpu_to_le16(0x0003)
+#define STA_KEY_FLG_ENCRYPT_MSK cpu_to_le16(0x0007)
+#define STA_KEY_FLG_NO_ENC cpu_to_le16(0x0000)
+#define STA_KEY_FLG_WEP cpu_to_le16(0x0001)
+#define STA_KEY_FLG_CCMP cpu_to_le16(0x0002)
+#define STA_KEY_FLG_TKIP cpu_to_le16(0x0003)
#define STA_KEY_FLG_KEYID_POS 8
-#define STA_KEY_FLG_INVALID __constant_cpu_to_le16(0x0800)
+#define STA_KEY_FLG_INVALID cpu_to_le16(0x0800)
/* wep key is either from global key (0) or from station info array (1) */
-#define STA_KEY_FLG_MAP_KEY_MSK __constant_cpu_to_le16(0x0008)
+#define STA_KEY_FLG_MAP_KEY_MSK cpu_to_le16(0x0008)
/* wep key in STA: 5-bytes (0) or 13-bytes (1) */
-#define STA_KEY_FLG_KEY_SIZE_MSK __constant_cpu_to_le16(0x1000)
-#define STA_KEY_MULTICAST_MSK __constant_cpu_to_le16(0x4000)
+#define STA_KEY_FLG_KEY_SIZE_MSK cpu_to_le16(0x1000)
+#define STA_KEY_MULTICAST_MSK cpu_to_le16(0x4000)
#define STA_KEY_MAX_NUM 8
/* Flags indicate whether to modify vs. don't change various station params */
#define STA_MODIFY_TX_RATE_MSK 0x04
#define STA_MODIFY_ADDBA_TID_MSK 0x08
#define STA_MODIFY_DELBA_TID_MSK 0x10
+#define STA_MODIFY_SLEEP_TX_COUNT_MSK 0x20
/* Receiver address (actually, Rx station's index into station table),
* combined with Traffic ID (QOS priority), in format used by Tx Scheduler */
* used as AP, or in an IBSS network, driver must set up station table
* entries for all STAs in network, starting with index IWL_STA_ID.
*/
+
+struct iwl3945_addsta_cmd {
+ u8 mode; /* 1: modify existing, 0: add new station */
+ u8 reserved[3];
+ struct sta_id_modify sta;
+ struct iwl4965_keyinfo key;
+ __le32 station_flags; /* STA_FLG_* */
+ __le32 station_flags_msk; /* STA_FLG_* */
+
+ /* bit field to disable (1) or enable (0) Tx for Traffic ID (TID)
+ * corresponding to bit (e.g. bit 5 controls TID 5).
+ * Set modify_mask bit STA_MODIFY_TID_DISABLE_TX to use this field. */
+ __le16 tid_disable_tx;
+
+ __le16 rate_n_flags;
+
+ /* TID for which to add block-ack support.
+ * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */
+ u8 add_immediate_ba_tid;
+
+ /* TID for which to remove block-ack support.
+ * Set modify_mask bit STA_MODIFY_DELBA_TID_MSK to use this field. */
+ u8 remove_immediate_ba_tid;
+
+ /* Starting Sequence Number for added block-ack support.
+ * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */
+ __le16 add_immediate_ba_ssn;
+} __attribute__ ((packed));
+
struct iwl4965_addsta_cmd {
u8 mode; /* 1: modify existing, 0: add new station */
u8 reserved[3];
* Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */
__le16 add_immediate_ba_ssn;
- __le32 reserved2;
+ /*
+ * Number of packets OK to transmit to station even though
+ * it is asleep -- used to synchronise PS-poll and u-APSD
+ * responses while ucode keeps track of STA sleep state.
+ */
+ __le16 sleep_tx_count;
+
+ __le16 reserved2;
} __attribute__ ((packed));
/* 5000 */
* Set modify_mask bit STA_MODIFY_TID_DISABLE_TX to use this field. */
__le16 tid_disable_tx;
- __le16 reserved1;
+ __le16 rate_n_flags; /* 3945 only */
/* TID for which to add block-ack support.
* Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */
* Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */
__le16 add_immediate_ba_ssn;
- __le32 reserved2;
+ /*
+ * Number of packets OK to transmit to station even though
+ * it is asleep -- used to synchronise PS-poll and u-APSD
+ * responses while ucode keeps track of STA sleep state.
+ */
+ __le16 sleep_tx_count;
+
+ __le16 reserved2;
} __attribute__ ((packed));
*
*****************************************************************************/
-struct iwl4965_rx_frame_stats {
- u8 phy_count;
- u8 id;
- u8 rssi;
- u8 agc;
- __le16 sig_avg;
- __le16 noise_diff;
- u8 payload[0];
-} __attribute__ ((packed));
-
-struct iwl4965_rx_frame_hdr {
- __le16 channel;
- __le16 phy_flags;
- u8 reserved1;
- u8 rate;
- __le16 len;
- u8 payload[0];
-} __attribute__ ((packed));
-
-#define RX_RES_STATUS_NO_CRC32_ERROR __constant_cpu_to_le32(1 << 0)
-#define RX_RES_STATUS_NO_RXE_OVERFLOW __constant_cpu_to_le32(1 << 1)
+#define RX_RES_STATUS_NO_CRC32_ERROR cpu_to_le32(1 << 0)
+#define RX_RES_STATUS_NO_RXE_OVERFLOW cpu_to_le32(1 << 1)
-#define RX_RES_PHY_FLAGS_BAND_24_MSK __constant_cpu_to_le16(1 << 0)
-#define RX_RES_PHY_FLAGS_MOD_CCK_MSK __constant_cpu_to_le16(1 << 1)
-#define RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK __constant_cpu_to_le16(1 << 2)
-#define RX_RES_PHY_FLAGS_NARROW_BAND_MSK __constant_cpu_to_le16(1 << 3)
-#define RX_RES_PHY_FLAGS_ANTENNA_MSK __constant_cpu_to_le16(0xf0)
+#define RX_RES_PHY_FLAGS_BAND_24_MSK cpu_to_le16(1 << 0)
+#define RX_RES_PHY_FLAGS_MOD_CCK_MSK cpu_to_le16(1 << 1)
+#define RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK cpu_to_le16(1 << 2)
+#define RX_RES_PHY_FLAGS_NARROW_BAND_MSK cpu_to_le16(1 << 3)
+#define RX_RES_PHY_FLAGS_ANTENNA_MSK 0xf0
+#define RX_RES_PHY_FLAGS_ANTENNA_POS 4
#define RX_RES_STATUS_SEC_TYPE_MSK (0x7 << 8)
#define RX_RES_STATUS_SEC_TYPE_NONE (0x0 << 8)
#define RX_MPDU_RES_STATUS_TTAK_OK (1 << 7)
#define RX_MPDU_RES_STATUS_DEC_DONE_MSK (0x800)
-struct iwl4965_rx_frame_end {
+
+struct iwl3945_rx_frame_stats {
+ u8 phy_count;
+ u8 id;
+ u8 rssi;
+ u8 agc;
+ __le16 sig_avg;
+ __le16 noise_diff;
+ u8 payload[0];
+} __attribute__ ((packed));
+
+struct iwl3945_rx_frame_hdr {
+ __le16 channel;
+ __le16 phy_flags;
+ u8 reserved1;
+ u8 rate;
+ __le16 len;
+ u8 payload[0];
+} __attribute__ ((packed));
+
+struct iwl3945_rx_frame_end {
__le32 status;
__le64 timestamp;
__le32 beacon_timestamp;
* The actual offsets of the hdr and end are dynamic based on
* stats.phy_count
*/
-struct iwl4965_rx_frame {
- struct iwl4965_rx_frame_stats stats;
- struct iwl4965_rx_frame_hdr hdr;
- struct iwl4965_rx_frame_end end;
+struct iwl3945_rx_frame {
+ struct iwl3945_rx_frame_stats stats;
+ struct iwl3945_rx_frame_hdr hdr;
+ struct iwl3945_rx_frame_end end;
} __attribute__ ((packed));
+#define IWL39_RX_FRAME_SIZE (4 + sizeof(struct iwl3945_rx_frame))
+
/* Fixed (non-configurable) rx data from phy */
#define IWL49_RX_RES_PHY_CNT 14
#define IWL50_OFDM_RSSI_C_BIT_POS 0
struct iwl5000_non_cfg_phy {
- __le32 non_cfg_phy[IWL50_RX_RES_PHY_CNT]; /* upto 8 phy entries */
+ __le32 non_cfg_phy[IWL50_RX_RES_PHY_CNT]; /* up to 8 phy entries */
} __attribute__ ((packed));
/* REPLY_TX Tx flags field */
-/* 1: Use RTS/CTS protocol or CTS-to-self if spec alows it
+/* 1: Use RTS/CTS protocol or CTS-to-self if spec allows it
* before this frame. if CTS-to-self required check
* RXON_FLG_SELF_CTS_EN status. */
-#define TX_CMD_FLG_RTS_CTS_MSK __constant_cpu_to_le32(1 << 0)
+#define TX_CMD_FLG_RTS_CTS_MSK cpu_to_le32(1 << 0)
/* 1: Use Request-To-Send protocol before this frame.
* Mutually exclusive vs. TX_CMD_FLG_CTS_MSK. */
-#define TX_CMD_FLG_RTS_MSK __constant_cpu_to_le32(1 << 1)
+#define TX_CMD_FLG_RTS_MSK cpu_to_le32(1 << 1)
/* 1: Transmit Clear-To-Send to self before this frame.
* Driver should set this for AUTH/DEAUTH/ASSOC-REQ/REASSOC mgmnt frames.
* Mutually exclusive vs. TX_CMD_FLG_RTS_MSK. */
-#define TX_CMD_FLG_CTS_MSK __constant_cpu_to_le32(1 << 2)
+#define TX_CMD_FLG_CTS_MSK cpu_to_le32(1 << 2)
/* 1: Expect ACK from receiving station
* 0: Don't expect ACK (MAC header's duration field s/b 0)
* Set this for unicast frames, but not broadcast/multicast. */
-#define TX_CMD_FLG_ACK_MSK __constant_cpu_to_le32(1 << 3)
+#define TX_CMD_FLG_ACK_MSK cpu_to_le32(1 << 3)
/* For 4965:
* 1: Use rate scale table (see REPLY_TX_LINK_QUALITY_CMD).
* uCode walks through table for additional Tx attempts.
* 0: Use Tx rate/MCS from Tx command's rate_n_flags field.
* This rate will be used for all Tx attempts; it will not be scaled. */
-#define TX_CMD_FLG_STA_RATE_MSK __constant_cpu_to_le32(1 << 4)
+#define TX_CMD_FLG_STA_RATE_MSK cpu_to_le32(1 << 4)
/* 1: Expect immediate block-ack.
* Set when Txing a block-ack request frame. Also set TX_CMD_FLG_ACK_MSK. */
-#define TX_CMD_FLG_IMM_BA_RSP_MASK __constant_cpu_to_le32(1 << 6)
+#define TX_CMD_FLG_IMM_BA_RSP_MASK cpu_to_le32(1 << 6)
/* 1: Frame requires full Tx-Op protection.
* Set this if either RTS or CTS Tx Flag gets set. */
-#define TX_CMD_FLG_FULL_TXOP_PROT_MSK __constant_cpu_to_le32(1 << 7)
+#define TX_CMD_FLG_FULL_TXOP_PROT_MSK cpu_to_le32(1 << 7)
/* Tx antenna selection field; used only for 3945, reserved (0) for 4965.
* Set field to "0" to allow 3945 uCode to select antenna (normal usage). */
-#define TX_CMD_FLG_ANT_SEL_MSK __constant_cpu_to_le32(0xf00)
-#define TX_CMD_FLG_ANT_A_MSK __constant_cpu_to_le32(1 << 8)
-#define TX_CMD_FLG_ANT_B_MSK __constant_cpu_to_le32(1 << 9)
+#define TX_CMD_FLG_ANT_SEL_MSK cpu_to_le32(0xf00)
+#define TX_CMD_FLG_ANT_A_MSK cpu_to_le32(1 << 8)
+#define TX_CMD_FLG_ANT_B_MSK cpu_to_le32(1 << 9)
/* 1: Ignore Bluetooth priority for this frame.
* 0: Delay Tx until Bluetooth device is done (normal usage). */
-#define TX_CMD_FLG_BT_DIS_MSK __constant_cpu_to_le32(1 << 12)
+#define TX_CMD_FLG_BT_DIS_MSK cpu_to_le32(1 << 12)
/* 1: uCode overrides sequence control field in MAC header.
* 0: Driver provides sequence control field in MAC header.
* Set this for management frames, non-QOS data frames, non-unicast frames,
* and also in Tx command embedded in REPLY_SCAN_CMD for active scans. */
-#define TX_CMD_FLG_SEQ_CTL_MSK __constant_cpu_to_le32(1 << 13)
+#define TX_CMD_FLG_SEQ_CTL_MSK cpu_to_le32(1 << 13)
/* 1: This frame is non-last MPDU; more fragments are coming.
* 0: Last fragment, or not using fragmentation. */
-#define TX_CMD_FLG_MORE_FRAG_MSK __constant_cpu_to_le32(1 << 14)
+#define TX_CMD_FLG_MORE_FRAG_MSK cpu_to_le32(1 << 14)
/* 1: uCode calculates and inserts Timestamp Function (TSF) in outgoing frame.
* 0: No TSF required in outgoing frame.
* Set this for transmitting beacons and probe responses. */
-#define TX_CMD_FLG_TSF_MSK __constant_cpu_to_le32(1 << 16)
+#define TX_CMD_FLG_TSF_MSK cpu_to_le32(1 << 16)
/* 1: Driver inserted 2 bytes pad after the MAC header, for (required) dword
* alignment of frame's payload data field.
* Set this for MAC headers with 26 or 30 bytes, i.e. those with QOS or ADDR4
* field (but not both). Driver must align frame data (i.e. data following
* MAC header) to DWORD boundary. */
-#define TX_CMD_FLG_MH_PAD_MSK __constant_cpu_to_le32(1 << 20)
+#define TX_CMD_FLG_MH_PAD_MSK cpu_to_le32(1 << 20)
/* accelerate aggregation support
* 0 - no CCMP encryption; 1 - CCMP encryption */
-#define TX_CMD_FLG_AGG_CCMP_MSK __constant_cpu_to_le32(1 << 22)
+#define TX_CMD_FLG_AGG_CCMP_MSK cpu_to_le32(1 << 22)
/* HCCA-AP - disable duration overwriting. */
-#define TX_CMD_FLG_DUR_MSK __constant_cpu_to_le32(1 << 25)
+#define TX_CMD_FLG_DUR_MSK cpu_to_le32(1 << 25)
/*
#define TKIP_ICV_LEN 4
/*
+ * REPLY_TX = 0x1c (command)
+ */
+
+struct iwl3945_tx_cmd {
+ /*
+ * MPDU byte count:
+ * MAC header (24/26/30/32 bytes) + 2 bytes pad if 26/30 header size,
+ * + 8 byte IV for CCM or TKIP (not used for WEP)
+ * + Data payload
+ * + 8-byte MIC (not used for CCM/WEP)
+ * NOTE: Does not include Tx command bytes, post-MAC pad bytes,
+ * MIC (CCM) 8 bytes, ICV (WEP/TKIP/CKIP) 4 bytes, CRC 4 bytes.i
+ * Range: 14-2342 bytes.
+ */
+ __le16 len;
+
+ /*
+ * MPDU or MSDU byte count for next frame.
+ * Used for fragmentation and bursting, but not 11n aggregation.
+ * Same as "len", but for next frame. Set to 0 if not applicable.
+ */
+ __le16 next_frame_len;
+
+ __le32 tx_flags; /* TX_CMD_FLG_* */
+
+ u8 rate;
+
+ /* Index of recipient station in uCode's station table */
+ u8 sta_id;
+ u8 tid_tspec;
+ u8 sec_ctl;
+ u8 key[16];
+ union {
+ u8 byte[8];
+ __le16 word[4];
+ __le32 dw[2];
+ } tkip_mic;
+ __le32 next_frame_info;
+ union {
+ __le32 life_time;
+ __le32 attempt;
+ } stop_time;
+ u8 supp_rates[2];
+ u8 rts_retry_limit; /*byte 50 */
+ u8 data_retry_limit; /*byte 51 */
+ union {
+ __le16 pm_frame_timeout;
+ __le16 attempt_duration;
+ } timeout;
+
+ /*
+ * Duration of EDCA burst Tx Opportunity, in 32-usec units.
+ * Set this if txop time is not specified by HCCA protocol (e.g. by AP).
+ */
+ __le16 driver_txop;
+
+ /*
+ * MAC header goes here, followed by 2 bytes padding if MAC header
+ * length is 26 or 30 bytes, followed by payload data
+ */
+ u8 payload[0];
+ struct ieee80211_hdr hdr[0];
+} __attribute__ ((packed));
+
+/*
+ * REPLY_TX = 0x1c (response)
+ */
+struct iwl3945_tx_resp {
+ u8 failure_rts;
+ u8 failure_frame;
+ u8 bt_kill_count;
+ u8 rate;
+ __le32 wireless_media_time;
+ __le32 status; /* TX status */
+} __attribute__ ((packed));
+
+
+/*
* 4965 uCode updates these Tx attempt count values in host DRAM.
* Used for managing Tx retries when expecting block-acks.
* Driver should set these fields to 0.
*/
-struct iwl4965_dram_scratch {
+struct iwl_dram_scratch {
u8 try_cnt; /* Tx attempts */
u8 bt_kill_cnt; /* Tx attempts blocked by Bluetooth device */
__le16 reserved;
} __attribute__ ((packed));
-/*
- * REPLY_TX = 0x1c (command)
- */
struct iwl_tx_cmd {
/*
* MPDU byte count:
__le32 tx_flags; /* TX_CMD_FLG_* */
- /* 4965's uCode may modify this field of the Tx command (in host DRAM!).
+ /* uCode may modify this field of the Tx command (in host DRAM!).
* Driver must also set dram_lsb_ptr and dram_msb_ptr in this cmd. */
- struct iwl4965_dram_scratch scratch;
+ struct iwl_dram_scratch scratch;
/* Rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is cleared. */
__le32 rate_n_flags; /* RATE_MCS_* */
TX_ABORT_REQUIRED_MSK = 0x80000000, /* bits 31:31 */
};
+static inline u32 iwl_tx_status_to_mac80211(u32 status)
+{
+ status &= TX_STATUS_MSK;
+
+ switch (status) {
+ case TX_STATUS_SUCCESS:
+ case TX_STATUS_DIRECT_DONE:
+ return IEEE80211_TX_STAT_ACK;
+ case TX_STATUS_FAIL_DEST_PS:
+ return IEEE80211_TX_STAT_TX_FILTERED;
+ default:
+ return 0;
+ }
+}
+
static inline bool iwl_is_tx_success(u32 status)
{
status &= TX_STATUS_MSK;
/*
* definitions for initial rate index field
- * bits [3:0] inital rate index
+ * bits [3:0] initial rate index
* bits [6:4] rate table color, used for the initial rate
* bit-7 invalid rate indication
* i.e. rate was not chosen from rate table
*
* See details under "TXPOWER" in iwl-4965-hw.h.
*/
+
+struct iwl3945_txpowertable_cmd {
+ u8 band; /* 0: 5 GHz, 1: 2.4 GHz */
+ u8 reserved;
+ __le16 channel;
+ struct iwl3945_power_per_rate power[IWL_MAX_RATES];
+} __attribute__ ((packed));
+
struct iwl4965_txpowertable_cmd {
u8 band; /* 0: 5 GHz, 1: 2.4 GHz */
u8 reserved;
struct iwl4965_tx_power_db tx_power;
} __attribute__ ((packed));
+
+/**
+ * struct iwl3945_rate_scaling_cmd - Rate Scaling Command & Response
+ *
+ * REPLY_RATE_SCALE = 0x47 (command, has simple generic response)
+ *
+ * NOTE: The table of rates passed to the uCode via the
+ * RATE_SCALE command sets up the corresponding order of
+ * rates used for all related commands, including rate
+ * masks, etc.
+ *
+ * For example, if you set 9MB (PLCP 0x0f) as the first
+ * rate in the rate table, the bit mask for that rate
+ * when passed through ofdm_basic_rates on the REPLY_RXON
+ * command would be bit 0 (1 << 0)
+ */
+struct iwl3945_rate_scaling_info {
+ __le16 rate_n_flags;
+ u8 try_cnt;
+ u8 next_rate_index;
+} __attribute__ ((packed));
+
+struct iwl3945_rate_scaling_cmd {
+ u8 table_id;
+ u8 reserved[3];
+ struct iwl3945_rate_scaling_info table[IWL_MAX_RATES];
+} __attribute__ ((packed));
+
+
/*RS_NEW_API: only TLC_RTS remains and moved to bit 0 */
#define LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK (1 << 0)
u8 start_rate_index[LINK_QUAL_AC_NUM];
} __attribute__ ((packed));
+#define LINK_QUAL_AGG_TIME_LIMIT_DEF (4000) /* 4 milliseconds */
+#define LINK_QUAL_AGG_TIME_LIMIT_MAX (65535)
+#define LINK_QUAL_AGG_TIME_LIMIT_MIN (0)
+
+#define LINK_QUAL_AGG_DISABLE_START_DEF (3)
+#define LINK_QUAL_AGG_DISABLE_START_MAX (255)
+#define LINK_QUAL_AGG_DISABLE_START_MIN (0)
+
+#define LINK_QUAL_AGG_FRAME_LIMIT_DEF (31)
+#define LINK_QUAL_AGG_FRAME_LIMIT_MAX (63)
+#define LINK_QUAL_AGG_FRAME_LIMIT_MIN (0)
+
/**
* struct iwl_link_qual_agg_params
*
* a) Use this same initial rate for first 3 entries.
* b) Find next lower available rate using same mode (SISO or MIMO),
* use for next 3 entries. If no lower rate available, switch to
- * legacy mode (no FAT channel, no MIMO, no short guard interval).
+ * legacy mode (no HT40 channel, no MIMO, no short guard interval).
* c) If using MIMO, set command's mimo_delimiter to number of entries
* using MIMO (3 or 6).
- * d) After trying 2 HT rates, switch to legacy mode (no FAT channel,
+ * d) After trying 2 HT rates, switch to legacy mode (no HT40 channel,
* no MIMO, no short guard interval), at the next lower bit rate
* (e.g. if second HT bit rate was 54, try 48 legacy), and follow
* legacy procedure for remaining table entries.
* match the modulation characteristics of the history set.
*
* When using block-ack (aggregation), all frames are transmitted at the same
- * rate, since there is no per-attempt acknowledgement from the destination
+ * rate, since there is no per-attempt acknowledgment from the destination
* station. The Tx response struct iwl_tx_resp indicates the Tx rate in
* rate_n_flags field. After receiving a block-ack, the driver can update
* history for the entire block all at once.
__le32 reserved2;
} __attribute__ ((packed));
+#define BT_COEX_DISABLE (0x0)
+#define BT_COEX_MODE_2W (0x1)
+#define BT_COEX_MODE_3W (0x2)
+#define BT_COEX_MODE_4W (0x3)
+
+#define BT_LEAD_TIME_MIN (0x0)
+#define BT_LEAD_TIME_DEF (0x1E)
+#define BT_LEAD_TIME_MAX (0xFF)
+
+#define BT_MAX_KILL_MIN (0x1)
+#define BT_MAX_KILL_DEF (0x5)
+#define BT_MAX_KILL_MAX (0xFF)
+
/*
* REPLY_BT_CONFIG = 0x9b (command, has simple generic response)
*
* 3945 and 4965 support hardware handshake with Bluetooth device on
* same platform. Bluetooth device alerts wireless device when it will Tx;
- * wireless device can delay or kill its own Tx to accomodate.
+ * wireless device can delay or kill its own Tx to accommodate.
*/
-struct iwl4965_bt_cmd {
+struct iwl_bt_cmd {
u8 flags;
u8 lead_time;
u8 max_kill;
RXON_FILTER_ASSOC_MSK | \
RXON_FILTER_BCON_AWARE_MSK)
-struct iwl4965_measure_channel {
+struct iwl_measure_channel {
__le32 duration; /* measurement duration in extended beacon
* format */
u8 channel; /* channel to measure */
- u8 type; /* see enum iwl4965_measure_type */
+ u8 type; /* see enum iwl_measure_type */
__le16 reserved;
} __attribute__ ((packed));
/*
* REPLY_SPECTRUM_MEASUREMENT_CMD = 0x74 (command)
*/
-struct iwl4965_spectrum_cmd {
+struct iwl_spectrum_cmd {
__le16 len; /* number of bytes starting from token */
u8 token; /* token id */
u8 id; /* measurement id -- 0 or 1 */
__le32 filter_flags; /* rxon filter flags */
__le16 channel_count; /* minimum 1, maximum 10 */
__le16 reserved3;
- struct iwl4965_measure_channel channels[10];
+ struct iwl_measure_channel channels[10];
} __attribute__ ((packed));
/*
* REPLY_SPECTRUM_MEASUREMENT_CMD = 0x74 (response)
*/
-struct iwl4965_spectrum_resp {
+struct iwl_spectrum_resp {
u8 token;
u8 id; /* id of the prior command replaced, or 0xff */
__le16 status; /* 0 - command will be handled
* measurement) */
} __attribute__ ((packed));
-enum iwl4965_measurement_state {
+enum iwl_measurement_state {
IWL_MEASUREMENT_START = 0,
IWL_MEASUREMENT_STOP = 1,
};
-enum iwl4965_measurement_status {
+enum iwl_measurement_status {
IWL_MEASUREMENT_OK = 0,
IWL_MEASUREMENT_CONCURRENT = 1,
IWL_MEASUREMENT_CSA_CONFLICT = 2,
#define NUM_ELEMENTS_IN_HISTOGRAM 8
-struct iwl4965_measurement_histogram {
+struct iwl_measurement_histogram {
__le32 ofdm[NUM_ELEMENTS_IN_HISTOGRAM]; /* in 0.8usec counts */
__le32 cck[NUM_ELEMENTS_IN_HISTOGRAM]; /* in 1usec counts */
} __attribute__ ((packed));
/* clear channel availability counters */
-struct iwl4965_measurement_cca_counters {
+struct iwl_measurement_cca_counters {
__le32 ofdm;
__le32 cck;
} __attribute__ ((packed));
-enum iwl4965_measure_type {
+enum iwl_measure_type {
IWL_MEASURE_BASIC = (1 << 0),
IWL_MEASURE_CHANNEL_LOAD = (1 << 1),
IWL_MEASURE_HISTOGRAM_RPI = (1 << 2),
/*
* SPECTRUM_MEASURE_NOTIFICATION = 0x75 (notification only, not a command)
*/
-struct iwl4965_spectrum_notification {
+struct iwl_spectrum_notification {
u8 id; /* measurement id -- 0 or 1 */
u8 token;
u8 channel_index; /* index in measurement channel list */
__le32 start_time; /* lower 32-bits of TSF */
u8 band; /* 0 - 5.2GHz, 1 - 2.4GHz */
u8 channel;
- u8 type; /* see enum iwl4965_measurement_type */
+ u8 type; /* see enum iwl_measurement_type */
u8 reserved1;
/* NOTE: cca_ofdm, cca_cck, basic_type, and histogram are only only
* valid if applicable for measurement type requested. */
u8 basic_type; /* 0 - bss, 1 - ofdm preamble, 2 -
* unidentified */
u8 reserved2[3];
- struct iwl4965_measurement_histogram histogram;
+ struct iwl_measurement_histogram histogram;
__le32 stop_time; /* lower 32-bits of TSF */
- __le32 status; /* see iwl4965_measurement_status */
+ __le32 status; /* see iwl_measurement_status */
} __attribute__ ((packed));
/******************************************************************************
* PM allow:
* bit 0 - '0' Driver not allow power management
* '1' Driver allow PM (use rest of parameters)
+ *
* uCode send sleep notifications:
* bit 1 - '0' Don't send sleep notification
* '1' send sleep notification (SEND_PM_NOTIFICATION)
+ *
* Sleep over DTIM
* bit 2 - '0' PM have to walk up every DTIM
* '1' PM could sleep over DTIM till listen Interval.
+ *
* PCI power managed
* bit 3 - '0' (PCI_CFG_LINK_CTRL & 0x1)
* '1' !(PCI_CFG_LINK_CTRL & 0x1)
+ *
+ * Fast PD
+ * bit 4 - '1' Put radio to sleep when receiving frame for others
+ *
* Force sleep Modes
* bit 31/30- '00' use both mac/xtal sleeps
* '01' force Mac sleep
* '11' Illegal set
*
* NOTE: if sleep_interval[SLEEP_INTRVL_TABLE_SIZE-1] > DTIM period then
- * ucode assume sleep over DTIM is allowed and we don't need to wakeup
+ * ucode assume sleep over DTIM is allowed and we don't need to wake up
* for every DTIM.
*/
#define IWL_POWER_VEC_SIZE 5
-#define IWL_POWER_DRIVER_ALLOW_SLEEP_MSK __constant_cpu_to_le16(1 << 0)
-#define IWL_POWER_SLEEP_OVER_DTIM_MSK __constant_cpu_to_le16(1 << 2)
-#define IWL_POWER_PCI_PM_MSK __constant_cpu_to_le16(1 << 3)
-#define IWL_POWER_FAST_PD __constant_cpu_to_le16(1 << 4)
+#define IWL_POWER_DRIVER_ALLOW_SLEEP_MSK cpu_to_le16(BIT(0))
+#define IWL_POWER_SLEEP_OVER_DTIM_MSK cpu_to_le16(BIT(2))
+#define IWL_POWER_PCI_PM_MSK cpu_to_le16(BIT(3))
+#define IWL_POWER_FAST_PD cpu_to_le16(BIT(4))
+
+struct iwl3945_powertable_cmd {
+ __le16 flags;
+ u8 reserved[2];
+ __le32 rx_data_timeout;
+ __le32 tx_data_timeout;
+ __le32 sleep_interval[IWL_POWER_VEC_SIZE];
+} __attribute__ ((packed));
struct iwl_powertable_cmd {
__le16 flags;
- u8 keep_alive_seconds;
- u8 debug_flags;
+ u8 keep_alive_seconds; /* 3945 reserved */
+ u8 debug_flags; /* 3945 reserved */
__le32 rx_data_timeout;
__le32 tx_data_timeout;
__le32 sleep_interval[IWL_POWER_VEC_SIZE];
* PM_SLEEP_NOTIFICATION = 0x7A (notification only, not a command)
* 3945 and 4965 identical.
*/
-struct iwl4965_sleep_notification {
+struct iwl_sleep_notification {
u8 pm_sleep_mode;
u8 pm_wakeup_src;
__le16 reserved;
#define CARD_STATE_CMD_DISABLE 0x00 /* Put card to sleep */
#define CARD_STATE_CMD_ENABLE 0x01 /* Wake up card */
#define CARD_STATE_CMD_HALT 0x02 /* Power down permanently */
-struct iwl4965_card_state_cmd {
+struct iwl_card_state_cmd {
__le32 status; /* CARD_STATE_CMD_* request new power state */
} __attribute__ ((packed));
/*
* CARD_STATE_NOTIFICATION = 0xa1 (notification only, not a command)
*/
-struct iwl4965_card_state_notif {
+struct iwl_card_state_notif {
__le32 flags;
} __attribute__ ((packed));
__le32 critical_temperature_R;
} __attribute__ ((packed));
+/* 1000, and 6x00 */
+struct iwl_ct_kill_throttling_config {
+ __le32 critical_temperature_exit;
+ __le32 reserved;
+ __le32 critical_temperature_enter;
+} __attribute__ ((packed));
+
/******************************************************************************
* (8)
* Scan Commands, Responses, Notifications:
*
*****************************************************************************/
-#define SCAN_CHANNEL_TYPE_PASSIVE __constant_cpu_to_le32(0)
-#define SCAN_CHANNEL_TYPE_ACTIVE __constant_cpu_to_le32(1)
+#define SCAN_CHANNEL_TYPE_PASSIVE cpu_to_le32(0)
+#define SCAN_CHANNEL_TYPE_ACTIVE cpu_to_le32(1)
/**
* struct iwl_scan_channel - entry in REPLY_SCAN_CMD channel table
* passive_dwell < max_out_time
* active_dwell < max_out_time
*/
+
+/* FIXME: rename to AP1, remove tpc */
+struct iwl3945_scan_channel {
+ /*
+ * type is defined as:
+ * 0:0 1 = active, 0 = passive
+ * 1:4 SSID direct bit map; if a bit is set, then corresponding
+ * SSID IE is transmitted in probe request.
+ * 5:7 reserved
+ */
+ u8 type;
+ u8 channel; /* band is selected by iwl3945_scan_cmd "flags" field */
+ struct iwl3945_tx_power tpc;
+ __le16 active_dwell; /* in 1024-uSec TU (time units), typ 5-50 */
+ __le16 passive_dwell; /* in 1024-uSec TU (time units), typ 20-500 */
+} __attribute__ ((packed));
+
+/* set number of direct probes u8 type */
+#define IWL39_SCAN_PROBE_MASK(n) ((BIT(n) | (BIT(n) - BIT(1))))
+
struct iwl_scan_channel {
/*
* type is defined as:
__le16 passive_dwell; /* in 1024-uSec TU (time units), typ 20-500 */
} __attribute__ ((packed));
+/* set number of direct probes __le32 type */
+#define IWL_SCAN_PROBE_MASK(n) cpu_to_le32((BIT(n) | (BIT(n) - BIT(1))))
+
/**
* struct iwl_ssid_ie - directed scan network information element
*
- * Up to 4 of these may appear in REPLY_SCAN_CMD, selected by "type" field
- * in struct iwl4965_scan_channel; each channel may select different ssids from
- * among the 4 entries. SSID IEs get transmitted in reverse order of entry.
+ * Up to 20 of these may appear in REPLY_SCAN_CMD (Note: Only 4 are in
+ * 3945 SCAN api), selected by "type" bit field in struct iwl_scan_channel;
+ * each channel may select different ssids from among the 20 (4) entries.
+ * SSID IEs get transmitted in reverse order of entry.
*/
struct iwl_ssid_ie {
u8 id;
u8 ssid[32];
} __attribute__ ((packed));
-#define PROBE_OPTION_MAX 0x14
-#define TX_CMD_LIFE_TIME_INFINITE __constant_cpu_to_le32(0xFFFFFFFF)
-#define IWL_GOOD_CRC_TH __constant_cpu_to_le16(1)
+#define PROBE_OPTION_MAX_3945 4
+#define PROBE_OPTION_MAX 20
+#define TX_CMD_LIFE_TIME_INFINITE cpu_to_le32(0xFFFFFFFF)
+#define IWL_GOOD_CRC_TH cpu_to_le16(1)
#define IWL_MAX_SCAN_SIZE 1024
+#define IWL_MAX_PROBE_REQUEST 200
/*
* REPLY_SCAN_CMD = 0x80 (command)
* To avoid uCode errors, see timing restrictions described under
* struct iwl_scan_channel.
*/
+
+struct iwl3945_scan_cmd {
+ __le16 len;
+ u8 reserved0;
+ u8 channel_count; /* # channels in channel list */
+ __le16 quiet_time; /* dwell only this # millisecs on quiet channel
+ * (only for active scan) */
+ __le16 quiet_plcp_th; /* quiet chnl is < this # pkts (typ. 1) */
+ __le16 good_CRC_th; /* passive -> active promotion threshold */
+ __le16 reserved1;
+ __le32 max_out_time; /* max usec to be away from associated (service)
+ * channel */
+ __le32 suspend_time; /* pause scan this long (in "extended beacon
+ * format") when returning to service channel:
+ * 3945; 31:24 # beacons, 19:0 additional usec,
+ * 4965; 31:22 # beacons, 21:0 additional usec.
+ */
+ __le32 flags; /* RXON_FLG_* */
+ __le32 filter_flags; /* RXON_FILTER_* */
+
+ /* For active scans (set to all-0s for passive scans).
+ * Does not include payload. Must specify Tx rate; no rate scaling. */
+ struct iwl3945_tx_cmd tx_cmd;
+
+ /* For directed active scans (set to all-0s otherwise) */
+ struct iwl_ssid_ie direct_scan[PROBE_OPTION_MAX_3945];
+
+ /*
+ * Probe request frame, followed by channel list.
+ *
+ * Size of probe request frame is specified by byte count in tx_cmd.
+ * Channel list follows immediately after probe request frame.
+ * Number of channels in list is specified by channel_count.
+ * Each channel in list is of type:
+ *
+ * struct iwl3945_scan_channel channels[0];
+ *
+ * NOTE: Only one band of channels can be scanned per pass. You
+ * must not mix 2.4GHz channels and 5.2GHz channels, and you must wait
+ * for one scan to complete (i.e. receive SCAN_COMPLETE_NOTIFICATION)
+ * before requesting another scan.
+ */
+ u8 data[0];
+} __attribute__ ((packed));
+
struct iwl_scan_cmd {
__le16 len;
u8 reserved0;
* Number of channels in list is specified by channel_count.
* Each channel in list is of type:
*
- * struct iwl4965_scan_channel channels[0];
+ * struct iwl_scan_channel channels[0];
*
* NOTE: Only one band of channels can be scanned per pass. You
* must not mix 2.4GHz channels and 5.2GHz channels, and you must wait
} __attribute__ ((packed));
/* Can abort will notify by complete notification with abort status. */
-#define CAN_ABORT_STATUS __constant_cpu_to_le32(0x1)
+#define CAN_ABORT_STATUS cpu_to_le32(0x1)
/* complete notification statuses */
#define ABORT_STATUS 0x2
/*
* BEACON_NOTIFICATION = 0x90 (notification only, not a command)
*/
+
+struct iwl3945_beacon_notif {
+ struct iwl3945_tx_resp beacon_notify_hdr;
+ __le32 low_tsf;
+ __le32 high_tsf;
+ __le32 ibss_mgr_status;
+} __attribute__ ((packed));
+
struct iwl4965_beacon_notif {
struct iwl4965_tx_resp beacon_notify_hdr;
__le32 low_tsf;
/*
* REPLY_TX_BEACON = 0x91 (command, has simple generic response)
*/
+
+struct iwl3945_tx_beacon_cmd {
+ struct iwl3945_tx_cmd tx;
+ __le16 tim_idx;
+ u8 tim_size;
+ u8 reserved1;
+ struct ieee80211_hdr frame[0]; /* beacon frame */
+} __attribute__ ((packed));
+
struct iwl_tx_beacon_cmd {
struct iwl_tx_cmd tx;
__le16 tim_idx;
/* statistics command response */
+struct iwl39_statistics_rx_phy {
+ __le32 ina_cnt;
+ __le32 fina_cnt;
+ __le32 plcp_err;
+ __le32 crc32_err;
+ __le32 overrun_err;
+ __le32 early_overrun_err;
+ __le32 crc32_good;
+ __le32 false_alarm_cnt;
+ __le32 fina_sync_err_cnt;
+ __le32 sfd_timeout;
+ __le32 fina_timeout;
+ __le32 unresponded_rts;
+ __le32 rxe_frame_limit_overrun;
+ __le32 sent_ack_cnt;
+ __le32 sent_cts_cnt;
+} __attribute__ ((packed));
+
+struct iwl39_statistics_rx_non_phy {
+ __le32 bogus_cts; /* CTS received when not expecting CTS */
+ __le32 bogus_ack; /* ACK received when not expecting ACK */
+ __le32 non_bssid_frames; /* number of frames with BSSID that
+ * doesn't belong to the STA BSSID */
+ __le32 filtered_frames; /* count frames that were dumped in the
+ * filtering process */
+ __le32 non_channel_beacons; /* beacons with our bss id but not on
+ * our serving channel */
+} __attribute__ ((packed));
+
+struct iwl39_statistics_rx {
+ struct iwl39_statistics_rx_phy ofdm;
+ struct iwl39_statistics_rx_phy cck;
+ struct iwl39_statistics_rx_non_phy general;
+} __attribute__ ((packed));
+
+struct iwl39_statistics_tx {
+ __le32 preamble_cnt;
+ __le32 rx_detected_cnt;
+ __le32 bt_prio_defer_cnt;
+ __le32 bt_prio_kill_cnt;
+ __le32 few_bytes_cnt;
+ __le32 cts_timeout;
+ __le32 ack_timeout;
+ __le32 expected_ack_cnt;
+ __le32 actual_ack_cnt;
+} __attribute__ ((packed));
+
+struct statistics_dbg {
+ __le32 burst_check;
+ __le32 burst_count;
+ __le32 reserved[4];
+} __attribute__ ((packed));
+
+struct iwl39_statistics_div {
+ __le32 tx_on_a;
+ __le32 tx_on_b;
+ __le32 exec_time;
+ __le32 probe_time;
+} __attribute__ ((packed));
+
+struct iwl39_statistics_general {
+ __le32 temperature;
+ struct statistics_dbg dbg;
+ __le32 sleep_time;
+ __le32 slots_out;
+ __le32 slots_idle;
+ __le32 ttl_timestamp;
+ struct iwl39_statistics_div div;
+} __attribute__ ((packed));
+
struct statistics_rx_phy {
__le32 ina_cnt;
__le32 fina_cnt;
__le32 reserved2;
} __attribute__ ((packed));
+#define INTERFERENCE_DATA_AVAILABLE cpu_to_le32(1)
+
struct statistics_rx_non_phy {
__le32 bogus_cts; /* CTS received when not expecting CTS */
__le32 bogus_ack; /* ACK received when not expecting ACK */
struct statistics_rx_ht_phy ofdm_ht;
} __attribute__ ((packed));
+/**
+ * struct statistics_tx_power - current tx power
+ *
+ * @ant_a: current tx power on chain a in 1/2 dB step
+ * @ant_b: current tx power on chain b in 1/2 dB step
+ * @ant_c: current tx power on chain c in 1/2 dB step
+ */
+struct statistics_tx_power {
+ u8 ant_a;
+ u8 ant_b;
+ u8 ant_c;
+ u8 reserved;
+} __attribute__ ((packed));
+
struct statistics_tx_non_phy_agg {
__le32 ba_timeout;
__le32 ba_reschedule_frames;
__le32 underrun;
__le32 bt_prio_kill;
__le32 rx_ba_rsp_cnt;
- __le32 reserved2;
- __le32 reserved3;
} __attribute__ ((packed));
struct statistics_tx {
__le32 cts_timeout_collision;
__le32 ack_or_ba_timeout_collision;
struct statistics_tx_non_phy_agg agg;
+ struct statistics_tx_power tx_power;
+ __le32 reserved1;
} __attribute__ ((packed));
-struct statistics_dbg {
- __le32 burst_check;
- __le32 burst_count;
- __le32 reserved[4];
-} __attribute__ ((packed));
struct statistics_div {
__le32 tx_on_a;
__le32 reserved3;
} __attribute__ ((packed));
+#define UCODE_STATISTICS_CLEAR_MSK (0x1 << 0)
+#define UCODE_STATISTICS_FREQUENCY_MSK (0x1 << 1)
+#define UCODE_STATISTICS_NARROW_BAND_MSK (0x1 << 2)
+
/*
* REPLY_STATISTICS_CMD = 0x9c,
* 3945 and 4965 identical.
* STATISTICS_NOTIFICATIONs after received beacons (see below). This flag
* does not affect the response to the REPLY_STATISTICS_CMD 0x9c itself.
*/
-#define IWL_STATS_CONF_CLEAR_STATS __constant_cpu_to_le32(0x1) /* see above */
-#define IWL_STATS_CONF_DISABLE_NOTIF __constant_cpu_to_le32(0x2)/* see above */
+#define IWL_STATS_CONF_CLEAR_STATS cpu_to_le32(0x1) /* see above */
+#define IWL_STATS_CONF_DISABLE_NOTIF cpu_to_le32(0x2)/* see above */
struct iwl_statistics_cmd {
__le32 configuration_flags; /* IWL_STATS_CONF_* */
} __attribute__ ((packed));
* appropriately so that each notification contains statistics for only the
* one channel that has just been scanned.
*/
-#define STATISTICS_REPLY_FLG_BAND_24G_MSK __constant_cpu_to_le32(0x2)
-#define STATISTICS_REPLY_FLG_FAT_MODE_MSK __constant_cpu_to_le32(0x8)
+#define STATISTICS_REPLY_FLG_BAND_24G_MSK cpu_to_le32(0x2)
+#define STATISTICS_REPLY_FLG_HT40_MODE_MSK cpu_to_le32(0x8)
+
+struct iwl3945_notif_statistics {
+ __le32 flag;
+ struct iwl39_statistics_rx rx;
+ struct iwl39_statistics_tx tx;
+ struct iwl39_statistics_general general;
+} __attribute__ ((packed));
+
struct iwl_notif_statistics {
__le32 flag;
struct statistics_rx rx;
* then this notification will be sent. */
#define CONSECUTIVE_MISSED_BCONS_TH 20
-struct iwl4965_missed_beacon_notif {
+struct iwl_missed_beacon_notif {
__le32 consequtive_missed_beacons;
__le32 total_missed_becons;
__le32 num_expected_beacons;
* Lower values mean higher energy; this means making sure that the value
* in HD_MIN_ENERGY_CCK_DET_INDEX is at or *above* "Max cck energy".
*
- * Driver should set the following entries to fixed values:
- *
- * HD_MIN_ENERGY_OFDM_DET_INDEX 100
- * HD_BARKER_CORR_TH_ADD_MIN_INDEX 190
- * HD_BARKER_CORR_TH_ADD_MIN_MRC_INDEX 390
- * HD_OFDM_ENERGY_TH_IN_INDEX 62
*/
/*
#define HD_OFDM_ENERGY_TH_IN_INDEX (10)
/* Control field in struct iwl_sensitivity_cmd */
-#define SENSITIVITY_CMD_CONTROL_DEFAULT_TABLE __constant_cpu_to_le16(0)
-#define SENSITIVITY_CMD_CONTROL_WORK_TABLE __constant_cpu_to_le16(1)
+#define SENSITIVITY_CMD_CONTROL_DEFAULT_TABLE cpu_to_le16(0)
+#define SENSITIVITY_CMD_CONTROL_WORK_TABLE cpu_to_le16(1)
/**
* struct iwl_sensitivity_cmd
};
-struct iwl_cal_xtal_freq {
- u8 cap_pin1;
- u8 cap_pin2;
-} __attribute__ ((packed));
-
-#define IWL_CALIB_INIT_CFG_ALL __constant_cpu_to_le32(0xffffffff)
+#define IWL_CALIB_INIT_CFG_ALL cpu_to_le32(0xffffffff)
struct iwl_calib_cfg_elmnt_s {
__le32 is_enable;
u8 data[0];
} __attribute__ ((packed));
-/* "Differential Gain" opcode used in REPLY_PHY_CALIBRATION_CMD. */
-
+/* IWL_PHY_CALIBRATE_DIFF_GAIN_CMD (7) */
struct iwl_calib_diff_gain_cmd {
- u8 opCode; /* IWL_PHY_CALIBRATE_DIFF_GAIN_CMD (7) */
- u8 flags; /* not used */
- __le16 reserved;
+ struct iwl_calib_hdr hdr;
s8 diff_gain_a; /* see above */
s8 diff_gain_b;
s8 diff_gain_c;
u8 reserved1;
} __attribute__ ((packed));
-struct iwl_calib_chain_noise_reset_cmd {
- u8 op_code; /* IWL_PHY_CALIBRATE_CHAIN_NOISE_RESET_CMD */
- u8 flags; /* not used */
- __le16 reserved;
+struct iwl_calib_xtal_freq_cmd {
+ struct iwl_calib_hdr hdr;
+ u8 cap_pin1;
+ u8 cap_pin2;
+ u8 pad[2];
} __attribute__ ((packed));
+/* IWL_PHY_CALIBRATE_CHAIN_NOISE_RESET_CMD */
+struct iwl_calib_chain_noise_reset_cmd {
+ struct iwl_calib_hdr hdr;
+ u8 data[0];
+};
+
+/* IWL_PHY_CALIBRATE_CHAIN_NOISE_GAIN_CMD */
struct iwl_calib_chain_noise_gain_cmd {
- u8 op_code; /* IWL_PHY_CALIBRATE_CHAIN_NOISE_GAIN_CMD */
- u8 flags; /* not used */
- __le16 reserved;
+ struct iwl_calib_hdr hdr;
u8 delta_gain_1;
u8 delta_gain_2;
- __le16 reserved1;
+ u8 pad[2];
} __attribute__ ((packed));
/******************************************************************************
} __attribute__ ((packed));
/*
- * Coexistence WIFI/WIMAX Command
- * COEX_PRIORITY_TABLE_CMD = 0x5a
- *
+ * station priority table entries
+ * also used as potential "events" value for both
+ * COEX_MEDIUM_NOTIFICATION and COEX_EVENT_CMD
+ */
+
+/*
+ * COEX events entry flag masks
+ * RP - Requested Priority
+ * WP - Win Medium Priority: priority assigned when the contention has been won
+ */
+#define COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG (0x1)
+#define COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG (0x2)
+#define COEX_EVT_FLAG_DELAY_MEDIUM_FREE_NTFY_FLG (0x4)
+
+#define COEX_CU_UNASSOC_IDLE_RP 4
+#define COEX_CU_UNASSOC_MANUAL_SCAN_RP 4
+#define COEX_CU_UNASSOC_AUTO_SCAN_RP 4
+#define COEX_CU_CALIBRATION_RP 4
+#define COEX_CU_PERIODIC_CALIBRATION_RP 4
+#define COEX_CU_CONNECTION_ESTAB_RP 4
+#define COEX_CU_ASSOCIATED_IDLE_RP 4
+#define COEX_CU_ASSOC_MANUAL_SCAN_RP 4
+#define COEX_CU_ASSOC_AUTO_SCAN_RP 4
+#define COEX_CU_ASSOC_ACTIVE_LEVEL_RP 4
+#define COEX_CU_RF_ON_RP 6
+#define COEX_CU_RF_OFF_RP 4
+#define COEX_CU_STAND_ALONE_DEBUG_RP 6
+#define COEX_CU_IPAN_ASSOC_LEVEL_RP 4
+#define COEX_CU_RSRVD1_RP 4
+#define COEX_CU_RSRVD2_RP 4
+
+#define COEX_CU_UNASSOC_IDLE_WP 3
+#define COEX_CU_UNASSOC_MANUAL_SCAN_WP 3
+#define COEX_CU_UNASSOC_AUTO_SCAN_WP 3
+#define COEX_CU_CALIBRATION_WP 3
+#define COEX_CU_PERIODIC_CALIBRATION_WP 3
+#define COEX_CU_CONNECTION_ESTAB_WP 3
+#define COEX_CU_ASSOCIATED_IDLE_WP 3
+#define COEX_CU_ASSOC_MANUAL_SCAN_WP 3
+#define COEX_CU_ASSOC_AUTO_SCAN_WP 3
+#define COEX_CU_ASSOC_ACTIVE_LEVEL_WP 3
+#define COEX_CU_RF_ON_WP 3
+#define COEX_CU_RF_OFF_WP 3
+#define COEX_CU_STAND_ALONE_DEBUG_WP 6
+#define COEX_CU_IPAN_ASSOC_LEVEL_WP 3
+#define COEX_CU_RSRVD1_WP 3
+#define COEX_CU_RSRVD2_WP 3
+
+#define COEX_UNASSOC_IDLE_FLAGS 0
+#define COEX_UNASSOC_MANUAL_SCAN_FLAGS \
+ (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \
+ COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG)
+#define COEX_UNASSOC_AUTO_SCAN_FLAGS \
+ (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \
+ COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG)
+#define COEX_CALIBRATION_FLAGS \
+ (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \
+ COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG)
+#define COEX_PERIODIC_CALIBRATION_FLAGS 0
+/*
+ * COEX_CONNECTION_ESTAB:
+ * we need DELAY_MEDIUM_FREE_NTFY to let WiMAX disconnect from network.
+ */
+#define COEX_CONNECTION_ESTAB_FLAGS \
+ (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \
+ COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG | \
+ COEX_EVT_FLAG_DELAY_MEDIUM_FREE_NTFY_FLG)
+#define COEX_ASSOCIATED_IDLE_FLAGS 0
+#define COEX_ASSOC_MANUAL_SCAN_FLAGS \
+ (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \
+ COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG)
+#define COEX_ASSOC_AUTO_SCAN_FLAGS \
+ (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \
+ COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG)
+#define COEX_ASSOC_ACTIVE_LEVEL_FLAGS 0
+#define COEX_RF_ON_FLAGS 0
+#define COEX_RF_OFF_FLAGS 0
+#define COEX_STAND_ALONE_DEBUG_FLAGS \
+ (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \
+ COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG)
+#define COEX_IPAN_ASSOC_LEVEL_FLAGS \
+ (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \
+ COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG | \
+ COEX_EVT_FLAG_DELAY_MEDIUM_FREE_NTFY_FLG)
+#define COEX_RSRVD1_FLAGS 0
+#define COEX_RSRVD2_FLAGS 0
+/*
+ * COEX_CU_RF_ON is the event wrapping all radio ownership.
+ * We need DELAY_MEDIUM_FREE_NTFY to let WiMAX disconnect from network.
*/
+#define COEX_CU_RF_ON_FLAGS \
+ (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \
+ COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG | \
+ COEX_EVT_FLAG_DELAY_MEDIUM_FREE_NTFY_FLG)
+
+
enum {
+ /* un-association part */
COEX_UNASSOC_IDLE = 0,
COEX_UNASSOC_MANUAL_SCAN = 1,
COEX_UNASSOC_AUTO_SCAN = 2,
+ /* calibration */
COEX_CALIBRATION = 3,
COEX_PERIODIC_CALIBRATION = 4,
+ /* connection */
COEX_CONNECTION_ESTAB = 5,
+ /* association part */
COEX_ASSOCIATED_IDLE = 6,
COEX_ASSOC_MANUAL_SCAN = 7,
COEX_ASSOC_AUTO_SCAN = 8,
COEX_ASSOC_ACTIVE_LEVEL = 9,
+ /* RF ON/OFF */
COEX_RF_ON = 10,
COEX_RF_OFF = 11,
COEX_STAND_ALONE_DEBUG = 12,
+ /* IPAN */
COEX_IPAN_ASSOC_LEVEL = 13,
+ /* reserved */
COEX_RSRVD1 = 14,
COEX_RSRVD2 = 15,
COEX_NUM_OF_EVENTS = 16
};
+/*
+ * Coexistence WIFI/WIMAX Command
+ * COEX_PRIORITY_TABLE_CMD = 0x5a
+ *
+ */
struct iwl_wimax_coex_event_entry {
u8 request_prio;
u8 win_medium_prio;
/* COEX flag masks */
-/* Staion table is valid */
+/* Station table is valid */
#define COEX_FLAGS_STA_TABLE_VALID_MSK (0x1)
-/* UnMask wakeup src at unassociated sleep */
+/* UnMask wake up src at unassociated sleep */
#define COEX_FLAGS_UNASSOC_WA_UNMASK_MSK (0x4)
-/* UnMask wakeup src at associated sleep */
+/* UnMask wake up src at associated sleep */
#define COEX_FLAGS_ASSOC_WA_UNMASK_MSK (0x8)
/* Enable CoEx feature. */
#define COEX_FLAGS_COEX_ENABLE_MSK (0x80)
struct iwl_wimax_coex_event_entry sta_prio[COEX_NUM_OF_EVENTS];
} __attribute__ ((packed));
+/*
+ * Coexistence MEDIUM NOTIFICATION
+ * COEX_MEDIUM_NOTIFICATION = 0x5b
+ *
+ * notification from uCode to host to indicate medium changes
+ *
+ */
+/*
+ * status field
+ * bit 0 - 2: medium status
+ * bit 3: medium change indication
+ * bit 4 - 31: reserved
+ */
+/* status option values, (0 - 2 bits) */
+#define COEX_MEDIUM_BUSY (0x0) /* radio belongs to WiMAX */
+#define COEX_MEDIUM_ACTIVE (0x1) /* radio belongs to WiFi */
+#define COEX_MEDIUM_PRE_RELEASE (0x2) /* received radio release */
+#define COEX_MEDIUM_MSK (0x7)
+
+/* send notification status (1 bit) */
+#define COEX_MEDIUM_CHANGED (0x8)
+#define COEX_MEDIUM_CHANGED_MSK (0x8)
+#define COEX_MEDIUM_SHIFT (3)
+
+struct iwl_coex_medium_notification {
+ __le32 status;
+ __le32 events;
+} __attribute__ ((packed));
+
+/*
+ * Coexistence EVENT Command
+ * COEX_EVENT_CMD = 0x5c
+ *
+ * send from host to uCode for coex event request.
+ */
+/* flags options */
+#define COEX_EVENT_REQUEST_MSK (0x1)
+
+struct iwl_coex_event_cmd {
+ u8 flags;
+ u8 event;
+ __le16 reserved;
+} __attribute__ ((packed));
+
+struct iwl_coex_event_resp {
+ __le32 status;
+} __attribute__ ((packed));
+
+
/******************************************************************************
* (13)
* Union of all expected notifications/responses:
*****************************************************************************/
struct iwl_rx_packet {
- __le32 len;
+ /*
+ * The first 4 bytes of the RX frame header contain both the RX frame
+ * size and some flags.
+ * Bit fields:
+ * 31: flag flush RB request
+ * 30: flag ignore TC (terminal counter) request
+ * 29: flag fast IRQ request
+ * 28-14: Reserved
+ * 13-00: RX frame size
+ */
+ __le32 len_n_flags;
struct iwl_cmd_header hdr;
union {
+ struct iwl3945_rx_frame rx_frame;
+ struct iwl3945_tx_resp tx_resp;
+ struct iwl3945_beacon_notif beacon_status;
+
struct iwl_alive_resp alive_frame;
- struct iwl4965_rx_frame rx_frame;
- struct iwl4965_tx_resp tx_resp;
- struct iwl4965_spectrum_notification spectrum_notif;
- struct iwl4965_csa_notification csa_notif;
+ struct iwl_spectrum_notification spectrum_notif;
+ struct iwl_csa_notification csa_notif;
struct iwl_error_resp err_resp;
- struct iwl4965_card_state_notif card_state_notif;
- struct iwl4965_beacon_notif beacon_status;
+ struct iwl_card_state_notif card_state_notif;
struct iwl_add_sta_resp add_sta;
struct iwl_rem_sta_resp rem_sta;
- struct iwl4965_sleep_notification sleep_notif;
- struct iwl4965_spectrum_resp spectrum;
+ struct iwl_sleep_notification sleep_notif;
+ struct iwl_spectrum_resp spectrum;
struct iwl_notif_statistics stats;
struct iwl_compressed_ba_resp compressed_ba;
- struct iwl4965_missed_beacon_notif missed_beacon;
+ struct iwl_missed_beacon_notif missed_beacon;
+ struct iwl_coex_medium_notification coex_medium_notif;
+ struct iwl_coex_event_resp coex_event;
__le32 status;
u8 raw[0];
} u;
} __attribute__ ((packed));
-#define IWL_RX_FRAME_SIZE (4 + sizeof(struct iwl4965_rx_frame))
+int iwl_agn_check_rxon_cmd(struct iwl_priv *priv);
-#endif /* __iwl4965_commands_h__ */
+#endif /* __iwl_commands_h__ */
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff