* in the file called LICENSE.GPL.
*
* Contact Information:
- * James P. Ketrenos <ipw2100-admin@linux.intel.com>
+ * Intel Linux Wireless <ilw@linux.intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
* BSD LICENSE
* Please use iwl-dev.h for driver implementation definitions.
*/
-#ifndef __iwl4965_commands_h__
-#define __iwl4965_commands_h__
+#ifndef __iwl_commands_h__
+#define __iwl_commands_h__
+
+/* uCode version contains 4 values: Major/Minor/API/Serial */
+#define IWL_UCODE_MAJOR(ver) (((ver) & 0xFF000000) >> 24)
+#define IWL_UCODE_MINOR(ver) (((ver) & 0x00FF0000) >> 16)
+#define IWL_UCODE_API(ver) (((ver) & 0x0000FF00) >> 8)
+#define IWL_UCODE_SERIAL(ver) ((ver) & 0x000000FF)
enum {
REPLY_ALIVE = 0x1,
REPLY_WEPKEY = 0x20,
/* RX, TX, LEDs */
+ REPLY_3945_RX = 0x1b, /* 3945 only */
REPLY_TX = 0x1c,
REPLY_RATE_SCALE = 0x47, /* 3945 only */
REPLY_LEDS_CMD = 0x48,
COEX_MEDIUM_NOTIFICATION = 0x5b,
COEX_EVENT_CMD = 0x5c,
+ /* Calibration */
+ CALIBRATION_CFG_CMD = 0x65,
+ CALIBRATION_RES_NOTIFICATION = 0x66,
+ CALIBRATION_COMPLETE_NOTIFICATION = 0x67,
+
/* 802.11h related */
RADAR_NOTIFICATION = 0x70, /* not used */
REPLY_QUIET_CMD = 0x71, /* not used */
REPLY_TX_POWER_DBM_CMD = 0x98,
MEASURE_ABORT_NOTIFICATION = 0x99, /* not used */
- /* Bluetooth device coexistance config command */
+ /* Bluetooth device coexistence config command */
REPLY_BT_CONFIG = 0x9b,
/* Statistics */
/* iwl_cmd_header flags value */
#define IWL_CMD_FAILED_MSK 0x40
+#define SEQ_TO_QUEUE(s) (((s) >> 8) & 0x1f)
+#define QUEUE_TO_SEQ(q) (((q) & 0x1f) << 8)
+#define SEQ_TO_INDEX(s) ((s) & 0xff)
+#define INDEX_TO_SEQ(i) ((i) & 0xff)
+#define SEQ_HUGE_FRAME cpu_to_le16(0x4000)
+#define SEQ_RX_FRAME cpu_to_le16(0x8000)
+
/**
* struct iwl_cmd_header
*
*/
struct iwl_cmd_header {
u8 cmd; /* Command ID: REPLY_RXON, etc. */
- u8 flags; /* IWL_CMD_* */
+ u8 flags; /* 0:5 reserved, 6 abort, 7 internal */
/*
- * The driver sets up the sequence number to values of its chosing.
+ * The driver sets up the sequence number to values of its choosing.
* uCode does not use this value, but passes it back to the driver
* when sending the response to each driver-originated command, so
* the driver can match the response to the command. Since the values
*
* The Linux driver uses the following format:
*
- * 0:7 index/position within Tx queue
- * 8:13 Tx queue selection
- * 14:14 driver sets this to indicate command is in the 'huge'
- * storage at the end of the command buffers, i.e. scan cmd
- * 15:15 uCode sets this in uCode-originated response/notification
+ * 0:7 tfd index - position within TX queue
+ * 8:12 TX queue id
+ * 13 reserved
+ * 14 huge - driver sets this to indicate command is in the
+ * 'huge' storage at the end of the command buffers
+ * 15 unsolicited RX or uCode-originated notification
*/
__le16 sequence;
} __attribute__ ((packed));
/**
- * 4965 rate_n_flags bit fields
+ * iwlagn rate_n_flags bit fields
*
- * rate_n_flags format is used in following 4965 commands:
+ * rate_n_flags format is used in following iwlagn commands:
* REPLY_RX (response only)
+ * REPLY_RX_MPDU (response only)
* REPLY_TX (both command and response)
* REPLY_TX_LINK_QUALITY_CMD
*
* 6) 54 Mbps
* 7) 60 Mbps
*
- * 3: 0) Single stream (SISO)
+ * 4-3: 0) Single stream (SISO)
* 1) Dual stream (MIMO)
+ * 2) Triple stream (MIMO)
*
* 5: Value of 0x20 in bits 7:0 indicates 6 Mbps FAT duplicate data
*
* 0x3) 54 Mbps
*
* Legacy CCK rate format for bits 7:0 (bit 8 must be "0", bit 9 "1"):
- * 3-0: 10) 1 Mbps
+ * 6-0: 10) 1 Mbps
* 20) 2 Mbps
* 55) 5.5 Mbps
* 110) 11 Mbps
*/
#define RATE_MCS_CODE_MSK 0x7
-#define RATE_MCS_MIMO_POS 3
-#define RATE_MCS_MIMO_MSK 0x8
+#define RATE_MCS_SPATIAL_POS 3
+#define RATE_MCS_SPATIAL_MSK 0x18
#define RATE_MCS_HT_DUP_POS 5
#define RATE_MCS_HT_DUP_MSK 0x20
#define RATE_MCS_SGI_MSK 0x2000
/**
- * rate_n_flags Tx antenna masks (4965 has 2 transmitters):
- * bit14:15 01 B inactive, A active
- * 10 B active, A inactive
- * 11 Both active
+ * rate_n_flags Tx antenna masks
+ * 4965 has 2 transmitters
+ * 5100 has 1 transmitter B
+ * 5150 has 1 transmitter A
+ * 5300 has 3 transmitters
+ * 5350 has 3 transmitters
+ * bit14:16
*/
#define RATE_MCS_ANT_POS 14
#define RATE_MCS_ANT_A_MSK 0x04000
#define RATE_MCS_ANT_B_MSK 0x08000
#define RATE_MCS_ANT_C_MSK 0x10000
#define RATE_MCS_ANT_ABC_MSK 0x1C000
-
-#define RATE_MCS_ANT_INIT_IND 1
+#define RATE_ANT_NUM 3
#define POWER_TABLE_NUM_ENTRIES 33
#define POWER_TABLE_NUM_HT_OFDM_ENTRIES 32
} __attribute__ ((packed));
/**
- * Commad REPLY_TX_POWER_DBM_CMD = 0x98
+ * Command REPLY_TX_POWER_DBM_CMD = 0x98
* struct iwl5000_tx_power_dbm_cmd
*/
#define IWL50_TX_POWER_AUTO 0x7f
*
*****************************************************************************/
-#define UCODE_VALID_OK __constant_cpu_to_le32(0x1)
+#define UCODE_VALID_OK cpu_to_le32(0x1)
#define INITIALIZE_SUBTYPE (9)
/*
* calculating txpower settings:
*
* 1) Power supply voltage indication. The voltage sensor outputs higher
- * values for lower voltage, and vice versa.
+ * values for lower voltage, and vice verse.
*
* 2) Temperature measurement parameters, for each of two channel widths
* (20 MHz and 40 MHz) supported by the radios. Temperature sensing
} __attribute__ ((packed));
-union tsf {
- u8 byte[8];
- __le16 word[4];
- __le32 dw[2];
-};
/*
* REPLY_ERROR = 0x2 (response only, not a command)
u8 reserved1;
__le16 bad_cmd_seq_num;
__le32 error_info;
- union tsf timestamp;
+ __le64 timestamp;
} __attribute__ ((packed));
/******************************************************************************
};
-#define RXON_RX_CHAIN_DRIVER_FORCE_MSK __constant_cpu_to_le16(0x1 << 0)
-#define RXON_RX_CHAIN_VALID_MSK __constant_cpu_to_le16(0x7 << 1)
+#define RXON_RX_CHAIN_DRIVER_FORCE_MSK cpu_to_le16(0x1 << 0)
+#define RXON_RX_CHAIN_VALID_MSK cpu_to_le16(0x7 << 1)
#define RXON_RX_CHAIN_VALID_POS (1)
-#define RXON_RX_CHAIN_FORCE_SEL_MSK __constant_cpu_to_le16(0x7 << 4)
+#define RXON_RX_CHAIN_FORCE_SEL_MSK cpu_to_le16(0x7 << 4)
#define RXON_RX_CHAIN_FORCE_SEL_POS (4)
-#define RXON_RX_CHAIN_FORCE_MIMO_SEL_MSK __constant_cpu_to_le16(0x7 << 7)
+#define RXON_RX_CHAIN_FORCE_MIMO_SEL_MSK cpu_to_le16(0x7 << 7)
#define RXON_RX_CHAIN_FORCE_MIMO_SEL_POS (7)
-#define RXON_RX_CHAIN_CNT_MSK __constant_cpu_to_le16(0x3 << 10)
+#define RXON_RX_CHAIN_CNT_MSK cpu_to_le16(0x3 << 10)
#define RXON_RX_CHAIN_CNT_POS (10)
-#define RXON_RX_CHAIN_MIMO_CNT_MSK __constant_cpu_to_le16(0x3 << 12)
+#define RXON_RX_CHAIN_MIMO_CNT_MSK cpu_to_le16(0x3 << 12)
#define RXON_RX_CHAIN_MIMO_CNT_POS (12)
-#define RXON_RX_CHAIN_MIMO_FORCE_MSK __constant_cpu_to_le16(0x1 << 14)
+#define RXON_RX_CHAIN_MIMO_FORCE_MSK cpu_to_le16(0x1 << 14)
#define RXON_RX_CHAIN_MIMO_FORCE_POS (14)
/* rx_config flags */
/* band & modulation selection */
-#define RXON_FLG_BAND_24G_MSK __constant_cpu_to_le32(1 << 0)
-#define RXON_FLG_CCK_MSK __constant_cpu_to_le32(1 << 1)
+#define RXON_FLG_BAND_24G_MSK cpu_to_le32(1 << 0)
+#define RXON_FLG_CCK_MSK cpu_to_le32(1 << 1)
/* auto detection enable */
-#define RXON_FLG_AUTO_DETECT_MSK __constant_cpu_to_le32(1 << 2)
+#define RXON_FLG_AUTO_DETECT_MSK cpu_to_le32(1 << 2)
/* TGg protection when tx */
-#define RXON_FLG_TGG_PROTECT_MSK __constant_cpu_to_le32(1 << 3)
+#define RXON_FLG_TGG_PROTECT_MSK cpu_to_le32(1 << 3)
/* cck short slot & preamble */
-#define RXON_FLG_SHORT_SLOT_MSK __constant_cpu_to_le32(1 << 4)
-#define RXON_FLG_SHORT_PREAMBLE_MSK __constant_cpu_to_le32(1 << 5)
+#define RXON_FLG_SHORT_SLOT_MSK cpu_to_le32(1 << 4)
+#define RXON_FLG_SHORT_PREAMBLE_MSK cpu_to_le32(1 << 5)
/* antenna selection */
-#define RXON_FLG_DIS_DIV_MSK __constant_cpu_to_le32(1 << 7)
-#define RXON_FLG_ANT_SEL_MSK __constant_cpu_to_le32(0x0f00)
-#define RXON_FLG_ANT_A_MSK __constant_cpu_to_le32(1 << 8)
-#define RXON_FLG_ANT_B_MSK __constant_cpu_to_le32(1 << 9)
+#define RXON_FLG_DIS_DIV_MSK cpu_to_le32(1 << 7)
+#define RXON_FLG_ANT_SEL_MSK cpu_to_le32(0x0f00)
+#define RXON_FLG_ANT_A_MSK cpu_to_le32(1 << 8)
+#define RXON_FLG_ANT_B_MSK cpu_to_le32(1 << 9)
/* radar detection enable */
-#define RXON_FLG_RADAR_DETECT_MSK __constant_cpu_to_le32(1 << 12)
-#define RXON_FLG_TGJ_NARROW_BAND_MSK __constant_cpu_to_le32(1 << 13)
+#define RXON_FLG_RADAR_DETECT_MSK cpu_to_le32(1 << 12)
+#define RXON_FLG_TGJ_NARROW_BAND_MSK cpu_to_le32(1 << 13)
/* rx response to host with 8-byte TSF
* (according to ON_AIR deassertion) */
-#define RXON_FLG_TSF2HOST_MSK __constant_cpu_to_le32(1 << 15)
+#define RXON_FLG_TSF2HOST_MSK cpu_to_le32(1 << 15)
/* HT flags */
#define RXON_FLG_CTRL_CHANNEL_LOC_POS (22)
-#define RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK __constant_cpu_to_le32(0x1 << 22)
+#define RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK cpu_to_le32(0x1 << 22)
#define RXON_FLG_HT_OPERATING_MODE_POS (23)
-#define RXON_FLG_HT_PROT_MSK __constant_cpu_to_le32(0x1 << 23)
-#define RXON_FLG_FAT_PROT_MSK __constant_cpu_to_le32(0x2 << 23)
+#define RXON_FLG_HT_PROT_MSK cpu_to_le32(0x1 << 23)
+#define RXON_FLG_FAT_PROT_MSK cpu_to_le32(0x2 << 23)
#define RXON_FLG_CHANNEL_MODE_POS (25)
-#define RXON_FLG_CHANNEL_MODE_MSK __constant_cpu_to_le32(0x3 << 25)
-#define RXON_FLG_CHANNEL_MODE_PURE_40_MSK __constant_cpu_to_le32(0x1 << 25)
-#define RXON_FLG_CHANNEL_MODE_MIXED_MSK __constant_cpu_to_le32(0x2 << 25)
+#define RXON_FLG_CHANNEL_MODE_MSK cpu_to_le32(0x3 << 25)
+#define RXON_FLG_CHANNEL_MODE_PURE_40_MSK cpu_to_le32(0x1 << 25)
+#define RXON_FLG_CHANNEL_MODE_MIXED_MSK cpu_to_le32(0x2 << 25)
/* CTS to self (if spec allows) flag */
-#define RXON_FLG_SELF_CTS_EN __constant_cpu_to_le32(0x1<<30)
+#define RXON_FLG_SELF_CTS_EN cpu_to_le32(0x1<<30)
/* rx_config filter flags */
/* accept all data frames */
-#define RXON_FILTER_PROMISC_MSK __constant_cpu_to_le32(1 << 0)
+#define RXON_FILTER_PROMISC_MSK cpu_to_le32(1 << 0)
/* pass control & management to host */
-#define RXON_FILTER_CTL2HOST_MSK __constant_cpu_to_le32(1 << 1)
+#define RXON_FILTER_CTL2HOST_MSK cpu_to_le32(1 << 1)
/* accept multi-cast */
-#define RXON_FILTER_ACCEPT_GRP_MSK __constant_cpu_to_le32(1 << 2)
+#define RXON_FILTER_ACCEPT_GRP_MSK cpu_to_le32(1 << 2)
/* don't decrypt uni-cast frames */
-#define RXON_FILTER_DIS_DECRYPT_MSK __constant_cpu_to_le32(1 << 3)
+#define RXON_FILTER_DIS_DECRYPT_MSK cpu_to_le32(1 << 3)
/* don't decrypt multi-cast frames */
-#define RXON_FILTER_DIS_GRP_DECRYPT_MSK __constant_cpu_to_le32(1 << 4)
+#define RXON_FILTER_DIS_GRP_DECRYPT_MSK cpu_to_le32(1 << 4)
/* STA is associated */
-#define RXON_FILTER_ASSOC_MSK __constant_cpu_to_le32(1 << 5)
+#define RXON_FILTER_ASSOC_MSK cpu_to_le32(1 << 5)
/* transfer to host non bssid beacons in associated state */
-#define RXON_FILTER_BCON_AWARE_MSK __constant_cpu_to_le32(1 << 6)
+#define RXON_FILTER_BCON_AWARE_MSK cpu_to_le32(1 << 6)
/**
* REPLY_RXON = 0x10 (command, has simple generic response)
u8 ofdm_ht_dual_stream_basic_rates;
} __attribute__ ((packed));
-/* 5000 HW just extend this cmmand */
+/* 5000 HW just extend this command */
struct iwl_rxon_cmd {
u8 node_addr[6];
__le16 reserved1;
__le16 reserved;
} __attribute__ ((packed));
-
-
+#define IWL_CONN_MAX_LISTEN_INTERVAL 10
/*
* REPLY_RXON_TIMING = 0x14 (command, has simple generic response)
*/
-struct iwl4965_rxon_time_cmd {
- union tsf timestamp;
+struct iwl_rxon_time_cmd {
+ __le64 timestamp;
__le16 beacon_interval;
__le16 atim_window;
__le32 beacon_init_val;
/*
* REPLY_CHANNEL_SWITCH = 0x72 (command, has simple generic response)
*/
-struct iwl4965_channel_switch_cmd {
+struct iwl_channel_switch_cmd {
u8 band;
u8 expect_beacon;
__le16 channel;
/*
* CHANNEL_SWITCH_NOTIFICATION = 0x73 (notification only, not a command)
*/
-struct iwl4965_csa_notification {
+struct iwl_csa_notification {
__le16 band;
__le16 channel;
__le32 status; /* 0 - OK, 1 - fail */
} __attribute__ ((packed));
/* QoS flags defines */
-#define QOS_PARAM_FLG_UPDATE_EDCA_MSK __constant_cpu_to_le32(0x01)
-#define QOS_PARAM_FLG_TGN_MSK __constant_cpu_to_le32(0x02)
-#define QOS_PARAM_FLG_TXOP_TYPE_MSK __constant_cpu_to_le32(0x10)
+#define QOS_PARAM_FLG_UPDATE_EDCA_MSK cpu_to_le32(0x01)
+#define QOS_PARAM_FLG_TGN_MSK cpu_to_le32(0x02)
+#define QOS_PARAM_FLG_TXOP_TYPE_MSK cpu_to_le32(0x10)
/* Number of Access Categories (AC) (EDCA), queues 0..3 */
#define AC_NUM 4
#define IWL_STATION_COUNT 32 /* MAX(3945,4965)*/
#define IWL_INVALID_STATION 255
-#define STA_FLG_PWR_SAVE_MSK __constant_cpu_to_le32(1 << 8);
-#define STA_FLG_RTS_MIMO_PROT_MSK __constant_cpu_to_le32(1 << 17)
-#define STA_FLG_AGG_MPDU_8US_MSK __constant_cpu_to_le32(1 << 18)
+#define STA_FLG_PWR_SAVE_MSK cpu_to_le32(1 << 8);
+#define STA_FLG_RTS_MIMO_PROT_MSK cpu_to_le32(1 << 17)
+#define STA_FLG_AGG_MPDU_8US_MSK cpu_to_le32(1 << 18)
#define STA_FLG_MAX_AGG_SIZE_POS (19)
-#define STA_FLG_MAX_AGG_SIZE_MSK __constant_cpu_to_le32(3 << 19)
-#define STA_FLG_FAT_EN_MSK __constant_cpu_to_le32(1 << 21)
-#define STA_FLG_MIMO_DIS_MSK __constant_cpu_to_le32(1 << 22)
+#define STA_FLG_MAX_AGG_SIZE_MSK cpu_to_le32(3 << 19)
+#define STA_FLG_FAT_EN_MSK cpu_to_le32(1 << 21)
+#define STA_FLG_MIMO_DIS_MSK cpu_to_le32(1 << 22)
#define STA_FLG_AGG_MPDU_DENSITY_POS (23)
-#define STA_FLG_AGG_MPDU_DENSITY_MSK __constant_cpu_to_le32(7 << 23)
+#define STA_FLG_AGG_MPDU_DENSITY_MSK cpu_to_le32(7 << 23)
/* Use in mode field. 1: modify existing entry, 0: add new station entry */
#define STA_CONTROL_MODIFY_MSK 0x01
/* key flags __le16*/
-#define STA_KEY_FLG_ENCRYPT_MSK __constant_cpu_to_le16(0x0007)
-#define STA_KEY_FLG_NO_ENC __constant_cpu_to_le16(0x0000)
-#define STA_KEY_FLG_WEP __constant_cpu_to_le16(0x0001)
-#define STA_KEY_FLG_CCMP __constant_cpu_to_le16(0x0002)
-#define STA_KEY_FLG_TKIP __constant_cpu_to_le16(0x0003)
+#define STA_KEY_FLG_ENCRYPT_MSK cpu_to_le16(0x0007)
+#define STA_KEY_FLG_NO_ENC cpu_to_le16(0x0000)
+#define STA_KEY_FLG_WEP cpu_to_le16(0x0001)
+#define STA_KEY_FLG_CCMP cpu_to_le16(0x0002)
+#define STA_KEY_FLG_TKIP cpu_to_le16(0x0003)
#define STA_KEY_FLG_KEYID_POS 8
-#define STA_KEY_FLG_INVALID __constant_cpu_to_le16(0x0800)
+#define STA_KEY_FLG_INVALID cpu_to_le16(0x0800)
/* wep key is either from global key (0) or from station info array (1) */
-#define STA_KEY_FLG_MAP_KEY_MSK __constant_cpu_to_le16(0x0008)
+#define STA_KEY_FLG_MAP_KEY_MSK cpu_to_le16(0x0008)
/* wep key in STA: 5-bytes (0) or 13-bytes (1) */
-#define STA_KEY_FLG_KEY_SIZE_MSK __constant_cpu_to_le16(0x1000)
-#define STA_KEY_MULTICAST_MSK __constant_cpu_to_le16(0x4000)
+#define STA_KEY_FLG_KEY_SIZE_MSK cpu_to_le16(0x1000)
+#define STA_KEY_MULTICAST_MSK cpu_to_le16(0x4000)
#define STA_KEY_MAX_NUM 8
/* Flags indicate whether to modify vs. don't change various station params */
*
*****************************************************************************/
-struct iwl4965_rx_frame_stats {
- u8 phy_count;
- u8 id;
- u8 rssi;
- u8 agc;
- __le16 sig_avg;
- __le16 noise_diff;
- u8 payload[0];
-} __attribute__ ((packed));
-
-struct iwl4965_rx_frame_hdr {
- __le16 channel;
- __le16 phy_flags;
- u8 reserved1;
- u8 rate;
- __le16 len;
- u8 payload[0];
-} __attribute__ ((packed));
-
-#define RX_RES_STATUS_NO_CRC32_ERROR __constant_cpu_to_le32(1 << 0)
-#define RX_RES_STATUS_NO_RXE_OVERFLOW __constant_cpu_to_le32(1 << 1)
+#define RX_RES_STATUS_NO_CRC32_ERROR cpu_to_le32(1 << 0)
+#define RX_RES_STATUS_NO_RXE_OVERFLOW cpu_to_le32(1 << 1)
-#define RX_RES_PHY_FLAGS_BAND_24_MSK __constant_cpu_to_le16(1 << 0)
-#define RX_RES_PHY_FLAGS_MOD_CCK_MSK __constant_cpu_to_le16(1 << 1)
-#define RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK __constant_cpu_to_le16(1 << 2)
-#define RX_RES_PHY_FLAGS_NARROW_BAND_MSK __constant_cpu_to_le16(1 << 3)
-#define RX_RES_PHY_FLAGS_ANTENNA_MSK __constant_cpu_to_le16(0xf0)
+#define RX_RES_PHY_FLAGS_BAND_24_MSK cpu_to_le16(1 << 0)
+#define RX_RES_PHY_FLAGS_MOD_CCK_MSK cpu_to_le16(1 << 1)
+#define RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK cpu_to_le16(1 << 2)
+#define RX_RES_PHY_FLAGS_NARROW_BAND_MSK cpu_to_le16(1 << 3)
+#define RX_RES_PHY_FLAGS_ANTENNA_MSK cpu_to_le16(0xf0)
#define RX_RES_STATUS_SEC_TYPE_MSK (0x7 << 8)
#define RX_RES_STATUS_SEC_TYPE_NONE (0x0 << 8)
#define RX_MPDU_RES_STATUS_TTAK_OK (1 << 7)
#define RX_MPDU_RES_STATUS_DEC_DONE_MSK (0x800)
-struct iwl4965_rx_frame_end {
- __le32 status;
- __le64 timestamp;
- __le32 beacon_timestamp;
-} __attribute__ ((packed));
-
-/*
- * REPLY_3945_RX = 0x1b (response only, not a command)
- *
- * NOTE: DO NOT dereference from casts to this structure
- * It is provided only for calculating minimum data set size.
- * The actual offsets of the hdr and end are dynamic based on
- * stats.phy_count
- */
-struct iwl4965_rx_frame {
- struct iwl4965_rx_frame_stats stats;
- struct iwl4965_rx_frame_hdr hdr;
- struct iwl4965_rx_frame_end end;
-} __attribute__ ((packed));
-
/* Fixed (non-configurable) rx data from phy */
-#define RX_PHY_FLAGS_ANTENNAE_OFFSET (4)
-#define RX_PHY_FLAGS_ANTENNAE_MASK (0x70)
-#define IWL_AGC_DB_MASK (0x3f80) /* MASK(7,13) */
-#define IWL_AGC_DB_POS (7)
+
+#define IWL49_RX_RES_PHY_CNT 14
+#define IWL49_RX_PHY_FLAGS_ANTENNAE_OFFSET (4)
+#define IWL49_RX_PHY_FLAGS_ANTENNAE_MASK (0x70)
+#define IWL49_AGC_DB_MASK (0x3f80) /* MASK(7,13) */
+#define IWL49_AGC_DB_POS (7)
struct iwl4965_rx_non_cfg_phy {
__le16 ant_selection; /* ant A bit 4, ant B bit 5, ant C bit 6 */
__le16 agc_info; /* agc code 0:6, agc dB 7:13, reserved 14:15 */
u8 pad[0];
} __attribute__ ((packed));
+
+#define IWL50_RX_RES_PHY_CNT 8
+#define IWL50_RX_RES_AGC_IDX 1
+#define IWL50_RX_RES_RSSI_AB_IDX 2
+#define IWL50_RX_RES_RSSI_C_IDX 3
+#define IWL50_OFDM_AGC_MSK 0xfe00
+#define IWL50_OFDM_AGC_BIT_POS 9
+#define IWL50_OFDM_RSSI_A_MSK 0x00ff
+#define IWL50_OFDM_RSSI_A_BIT_POS 0
+#define IWL50_OFDM_RSSI_B_MSK 0xff0000
+#define IWL50_OFDM_RSSI_B_BIT_POS 16
+#define IWL50_OFDM_RSSI_C_MSK 0x00ff
+#define IWL50_OFDM_RSSI_C_BIT_POS 0
+
+struct iwl5000_non_cfg_phy {
+ __le32 non_cfg_phy[IWL50_RX_RES_PHY_CNT]; /* up to 8 phy entries */
+} __attribute__ ((packed));
+
+
/*
* REPLY_RX = 0xc3 (response only, not a command)
* Used only for legacy (non 11n) frames.
*/
-#define RX_RES_PHY_CNT 14
-struct iwl4965_rx_phy_res {
+struct iwl_rx_phy_res {
u8 non_cfg_phy_cnt; /* non configurable DSP phy data byte count */
u8 cfg_phy_cnt; /* configurable DSP phy data byte count */
u8 stat_id; /* configurable DSP phy data set ID */
__le32 beacon_time_stamp; /* beacon at on-air rise */
__le16 phy_flags; /* general phy flags: band, modulation, ... */
__le16 channel; /* channel number */
- __le16 non_cfg_phy[RX_RES_PHY_CNT]; /* upto 14 phy entries */
- __le32 reserved2;
+ u8 non_cfg_phy_buf[32]; /* for various implementations of non_cfg_phy */
__le32 rate_n_flags; /* RATE_MCS_* */
__le16 byte_count; /* frame's byte-count */
__le16 reserved3;
/* REPLY_TX Tx flags field */
-/* 1: Use RTS/CTS protocol or CTS-to-self if spec alows it
+/* 1: Use RTS/CTS protocol or CTS-to-self if spec allows it
* before this frame. if CTS-to-self required check
* RXON_FLG_SELF_CTS_EN status. */
-#define TX_CMD_FLG_RTS_CTS_MSK __constant_cpu_to_le32(1 << 0)
+#define TX_CMD_FLG_RTS_CTS_MSK cpu_to_le32(1 << 0)
/* 1: Use Request-To-Send protocol before this frame.
* Mutually exclusive vs. TX_CMD_FLG_CTS_MSK. */
-#define TX_CMD_FLG_RTS_MSK __constant_cpu_to_le32(1 << 1)
+#define TX_CMD_FLG_RTS_MSK cpu_to_le32(1 << 1)
/* 1: Transmit Clear-To-Send to self before this frame.
* Driver should set this for AUTH/DEAUTH/ASSOC-REQ/REASSOC mgmnt frames.
* Mutually exclusive vs. TX_CMD_FLG_RTS_MSK. */
-#define TX_CMD_FLG_CTS_MSK __constant_cpu_to_le32(1 << 2)
+#define TX_CMD_FLG_CTS_MSK cpu_to_le32(1 << 2)
/* 1: Expect ACK from receiving station
* 0: Don't expect ACK (MAC header's duration field s/b 0)
* Set this for unicast frames, but not broadcast/multicast. */
-#define TX_CMD_FLG_ACK_MSK __constant_cpu_to_le32(1 << 3)
+#define TX_CMD_FLG_ACK_MSK cpu_to_le32(1 << 3)
/* For 4965:
* 1: Use rate scale table (see REPLY_TX_LINK_QUALITY_CMD).
* uCode walks through table for additional Tx attempts.
* 0: Use Tx rate/MCS from Tx command's rate_n_flags field.
* This rate will be used for all Tx attempts; it will not be scaled. */
-#define TX_CMD_FLG_STA_RATE_MSK __constant_cpu_to_le32(1 << 4)
+#define TX_CMD_FLG_STA_RATE_MSK cpu_to_le32(1 << 4)
/* 1: Expect immediate block-ack.
* Set when Txing a block-ack request frame. Also set TX_CMD_FLG_ACK_MSK. */
-#define TX_CMD_FLG_IMM_BA_RSP_MASK __constant_cpu_to_le32(1 << 6)
+#define TX_CMD_FLG_IMM_BA_RSP_MASK cpu_to_le32(1 << 6)
/* 1: Frame requires full Tx-Op protection.
* Set this if either RTS or CTS Tx Flag gets set. */
-#define TX_CMD_FLG_FULL_TXOP_PROT_MSK __constant_cpu_to_le32(1 << 7)
+#define TX_CMD_FLG_FULL_TXOP_PROT_MSK cpu_to_le32(1 << 7)
/* Tx antenna selection field; used only for 3945, reserved (0) for 4965.
* Set field to "0" to allow 3945 uCode to select antenna (normal usage). */
-#define TX_CMD_FLG_ANT_SEL_MSK __constant_cpu_to_le32(0xf00)
-#define TX_CMD_FLG_ANT_A_MSK __constant_cpu_to_le32(1 << 8)
-#define TX_CMD_FLG_ANT_B_MSK __constant_cpu_to_le32(1 << 9)
+#define TX_CMD_FLG_ANT_SEL_MSK cpu_to_le32(0xf00)
+#define TX_CMD_FLG_ANT_A_MSK cpu_to_le32(1 << 8)
+#define TX_CMD_FLG_ANT_B_MSK cpu_to_le32(1 << 9)
/* 1: Ignore Bluetooth priority for this frame.
* 0: Delay Tx until Bluetooth device is done (normal usage). */
-#define TX_CMD_FLG_BT_DIS_MSK __constant_cpu_to_le32(1 << 12)
+#define TX_CMD_FLG_BT_DIS_MSK cpu_to_le32(1 << 12)
/* 1: uCode overrides sequence control field in MAC header.
* 0: Driver provides sequence control field in MAC header.
* Set this for management frames, non-QOS data frames, non-unicast frames,
* and also in Tx command embedded in REPLY_SCAN_CMD for active scans. */
-#define TX_CMD_FLG_SEQ_CTL_MSK __constant_cpu_to_le32(1 << 13)
+#define TX_CMD_FLG_SEQ_CTL_MSK cpu_to_le32(1 << 13)
/* 1: This frame is non-last MPDU; more fragments are coming.
* 0: Last fragment, or not using fragmentation. */
-#define TX_CMD_FLG_MORE_FRAG_MSK __constant_cpu_to_le32(1 << 14)
+#define TX_CMD_FLG_MORE_FRAG_MSK cpu_to_le32(1 << 14)
/* 1: uCode calculates and inserts Timestamp Function (TSF) in outgoing frame.
* 0: No TSF required in outgoing frame.
* Set this for transmitting beacons and probe responses. */
-#define TX_CMD_FLG_TSF_MSK __constant_cpu_to_le32(1 << 16)
+#define TX_CMD_FLG_TSF_MSK cpu_to_le32(1 << 16)
/* 1: Driver inserted 2 bytes pad after the MAC header, for (required) dword
* alignment of frame's payload data field.
* Set this for MAC headers with 26 or 30 bytes, i.e. those with QOS or ADDR4
* field (but not both). Driver must align frame data (i.e. data following
* MAC header) to DWORD boundary. */
-#define TX_CMD_FLG_MH_PAD_MSK __constant_cpu_to_le32(1 << 20)
+#define TX_CMD_FLG_MH_PAD_MSK cpu_to_le32(1 << 20)
/* accelerate aggregation support
* 0 - no CCMP encryption; 1 - CCMP encryption */
-#define TX_CMD_FLG_AGG_CCMP_MSK __constant_cpu_to_le32(1 << 22)
+#define TX_CMD_FLG_AGG_CCMP_MSK cpu_to_le32(1 << 22)
/* HCCA-AP - disable duration overwriting. */
-#define TX_CMD_FLG_DUR_MSK __constant_cpu_to_le32(1 << 25)
+#define TX_CMD_FLG_DUR_MSK cpu_to_le32(1 << 25)
/*
* Used for managing Tx retries when expecting block-acks.
* Driver should set these fields to 0.
*/
-struct iwl4965_dram_scratch {
+struct iwl_dram_scratch {
u8 try_cnt; /* Tx attempts */
u8 bt_kill_cnt; /* Tx attempts blocked by Bluetooth device */
__le16 reserved;
__le32 tx_flags; /* TX_CMD_FLG_* */
- /* 4965's uCode may modify this field of the Tx command (in host DRAM!).
+ /* uCode may modify this field of the Tx command (in host DRAM!).
* Driver must also set dram_lsb_ptr and dram_msb_ptr in this cmd. */
- struct iwl4965_dram_scratch scratch;
+ struct iwl_dram_scratch scratch;
/* Rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is cleared. */
__le32 rate_n_flags; /* RATE_MCS_* */
};
enum {
- TX_STATUS_MSK = 0x000000ff, /* bits 0:7 */
+ TX_STATUS_MSK = 0x000000ff, /* bits 0:7 */
TX_STATUS_DELAY_MSK = 0x00000040,
TX_STATUS_ABORT_MSK = 0x00000080,
TX_PACKET_MODE_MSK = 0x0000ff00, /* bits 8:15 */
TX_FIFO_NUMBER_MSK = 0x00070000, /* bits 16:18 */
- TX_RESERVED = 0x00780000, /* bits 19:22 */
+ TX_RESERVED = 0x00780000, /* bits 19:22 */
TX_POWER_PA_DETECT_MSK = 0x7f800000, /* bits 23:30 */
TX_ABORT_REQUIRED_MSK = 0x80000000, /* bits 31:31 */
};
-static inline int iwl_is_tx_success(u32 status)
+static inline bool iwl_is_tx_success(u32 status)
{
status &= TX_STATUS_MSK;
- return (status == TX_STATUS_SUCCESS)
- || (status == TX_STATUS_DIRECT_DONE);
+ return (status == TX_STATUS_SUCCESS) ||
+ (status == TX_STATUS_DIRECT_DONE);
}
AGG_TX_STATE_DELAY_TX_MSK = 0x400
};
-#define AGG_TX_STATE_LAST_SENT_MSK \
-(AGG_TX_STATE_LAST_SENT_TTL_MSK | \
- AGG_TX_STATE_LAST_SENT_TRY_CNT_MSK | \
- AGG_TX_STATE_LAST_SENT_BT_KILL_MSK)
+#define AGG_TX_STATE_LAST_SENT_MSK (AGG_TX_STATE_LAST_SENT_TTL_MSK | \
+ AGG_TX_STATE_LAST_SENT_TRY_CNT_MSK | \
+ AGG_TX_STATE_LAST_SENT_BT_KILL_MSK)
/* # tx attempts for first frame in aggregation */
#define AGG_TX_STATE_TRY_CNT_POS 12
} u;
} __attribute__ ((packed));
+/*
+ * definitions for initial rate index field
+ * bits [3:0] initial rate index
+ * bits [6:4] rate table color, used for the initial rate
+ * bit-7 invalid rate indication
+ * i.e. rate was not chosen from rate table
+ * or rate table color was changed during frame retries
+ * refer tlc rate info
+ */
+
+#define IWL50_TX_RES_INIT_RATE_INDEX_POS 0
+#define IWL50_TX_RES_INIT_RATE_INDEX_MSK 0x0f
+#define IWL50_TX_RES_RATE_TABLE_COLOR_POS 4
+#define IWL50_TX_RES_RATE_TABLE_COLOR_MSK 0x70
+#define IWL50_TX_RES_INV_RATE_INDEX_MSK 0x80
+
+/* refer to ra_tid */
+#define IWL50_TX_RES_TID_POS 0
+#define IWL50_TX_RES_TID_MSK 0x0f
+#define IWL50_TX_RES_RA_POS 4
+#define IWL50_TX_RES_RA_MSK 0xf0
+
struct iwl5000_tx_resp {
u8 frame_count; /* 1 no aggregation, >1 aggregation */
u8 bt_kill_count; /* # blocked by bluetooth (unused for agg) */
* For agg: RTS + CTS + aggregation tx time + block-ack time. */
__le16 wireless_media_time; /* uSecs */
- __le16 reserved;
- __le32 pa_power1; /* RF power amplifier measurement (not used) */
- __le32 pa_power2;
+ u8 pa_status; /* RF power amplifier measurement (not used) */
+ u8 pa_integ_res_a[3];
+ u8 pa_integ_res_b[3];
+ u8 pa_integ_res_C[3];
__le32 tfd_info;
__le16 seq_ctl;
__le16 byte_cnt;
- __le32 tlc_info;
+ u8 tlc_info;
+ u8 ra_tid; /* tid (0:3), sta_id (4:7) */
+ __le16 frame_ctrl;
/*
* For non-agg: frame status TX_STATUS_*
* For agg: status of 1st frame, AGG_TX_STATE_*; other frame status
* match the modulation characteristics of the history set.
*
* When using block-ack (aggregation), all frames are transmitted at the same
- * rate, since there is no per-attempt acknowledgement from the destination
+ * rate, since there is no per-attempt acknowledgment from the destination
* station. The Tx response struct iwl_tx_resp indicates the Tx rate in
* rate_n_flags field. After receiving a block-ack, the driver can update
* history for the entire block all at once.
*
* 3945 and 4965 support hardware handshake with Bluetooth device on
* same platform. Bluetooth device alerts wireless device when it will Tx;
- * wireless device can delay or kill its own Tx to accomodate.
+ * wireless device can delay or kill its own Tx to accommodate.
*/
-struct iwl4965_bt_cmd {
+struct iwl_bt_cmd {
u8 flags;
u8 lead_time;
u8 max_kill;
RXON_FILTER_ASSOC_MSK | \
RXON_FILTER_BCON_AWARE_MSK)
-struct iwl4965_measure_channel {
+struct iwl_measure_channel {
__le32 duration; /* measurement duration in extended beacon
* format */
u8 channel; /* channel to measure */
- u8 type; /* see enum iwl4965_measure_type */
+ u8 type; /* see enum iwl_measure_type */
__le16 reserved;
} __attribute__ ((packed));
/*
* REPLY_SPECTRUM_MEASUREMENT_CMD = 0x74 (command)
*/
-struct iwl4965_spectrum_cmd {
+struct iwl_spectrum_cmd {
__le16 len; /* number of bytes starting from token */
u8 token; /* token id */
u8 id; /* measurement id -- 0 or 1 */
__le32 filter_flags; /* rxon filter flags */
__le16 channel_count; /* minimum 1, maximum 10 */
__le16 reserved3;
- struct iwl4965_measure_channel channels[10];
+ struct iwl_measure_channel channels[10];
} __attribute__ ((packed));
/*
* REPLY_SPECTRUM_MEASUREMENT_CMD = 0x74 (response)
*/
-struct iwl4965_spectrum_resp {
+struct iwl_spectrum_resp {
u8 token;
u8 id; /* id of the prior command replaced, or 0xff */
__le16 status; /* 0 - command will be handled
* measurement) */
} __attribute__ ((packed));
-enum iwl4965_measurement_state {
+enum iwl_measurement_state {
IWL_MEASUREMENT_START = 0,
IWL_MEASUREMENT_STOP = 1,
};
-enum iwl4965_measurement_status {
+enum iwl_measurement_status {
IWL_MEASUREMENT_OK = 0,
IWL_MEASUREMENT_CONCURRENT = 1,
IWL_MEASUREMENT_CSA_CONFLICT = 2,
#define NUM_ELEMENTS_IN_HISTOGRAM 8
-struct iwl4965_measurement_histogram {
+struct iwl_measurement_histogram {
__le32 ofdm[NUM_ELEMENTS_IN_HISTOGRAM]; /* in 0.8usec counts */
__le32 cck[NUM_ELEMENTS_IN_HISTOGRAM]; /* in 1usec counts */
} __attribute__ ((packed));
/* clear channel availability counters */
-struct iwl4965_measurement_cca_counters {
+struct iwl_measurement_cca_counters {
__le32 ofdm;
__le32 cck;
} __attribute__ ((packed));
-enum iwl4965_measure_type {
+enum iwl_measure_type {
IWL_MEASURE_BASIC = (1 << 0),
IWL_MEASURE_CHANNEL_LOAD = (1 << 1),
IWL_MEASURE_HISTOGRAM_RPI = (1 << 2),
/*
* SPECTRUM_MEASURE_NOTIFICATION = 0x75 (notification only, not a command)
*/
-struct iwl4965_spectrum_notification {
+struct iwl_spectrum_notification {
u8 id; /* measurement id -- 0 or 1 */
u8 token;
u8 channel_index; /* index in measurement channel list */
__le32 start_time; /* lower 32-bits of TSF */
u8 band; /* 0 - 5.2GHz, 1 - 2.4GHz */
u8 channel;
- u8 type; /* see enum iwl4965_measurement_type */
+ u8 type; /* see enum iwl_measurement_type */
u8 reserved1;
/* NOTE: cca_ofdm, cca_cck, basic_type, and histogram are only only
* valid if applicable for measurement type requested. */
u8 basic_type; /* 0 - bss, 1 - ofdm preamble, 2 -
* unidentified */
u8 reserved2[3];
- struct iwl4965_measurement_histogram histogram;
+ struct iwl_measurement_histogram histogram;
__le32 stop_time; /* lower 32-bits of TSF */
- __le32 status; /* see iwl4965_measurement_status */
+ __le32 status; /* see iwl_measurement_status */
} __attribute__ ((packed));
/******************************************************************************
*****************************************************************************/
/**
- * struct iwl4965_powertable_cmd - Power Table Command
+ * struct iwl_powertable_cmd - Power Table Command
* @flags: See below:
*
* POWER_TABLE_CMD = 0x77 (command, has simple generic response)
* bit 2 - '0' PM have to walk up every DTIM
* '1' PM could sleep over DTIM till listen Interval.
* PCI power managed
- * bit 3 - '0' (PCI_LINK_CTRL & 0x1)
- * '1' !(PCI_LINK_CTRL & 0x1)
+ * bit 3 - '0' (PCI_CFG_LINK_CTRL & 0x1)
+ * '1' !(PCI_CFG_LINK_CTRL & 0x1)
* Force sleep Modes
* bit 31/30- '00' use both mac/xtal sleeps
* '01' force Mac sleep
* '11' Illegal set
*
* NOTE: if sleep_interval[SLEEP_INTRVL_TABLE_SIZE-1] > DTIM period then
- * ucode assume sleep over DTIM is allowed and we don't need to wakeup
+ * ucode assume sleep over DTIM is allowed and we don't need to wake up
* for every DTIM.
*/
#define IWL_POWER_VEC_SIZE 5
-#define IWL_POWER_DRIVER_ALLOW_SLEEP_MSK __constant_cpu_to_le16(1 << 0)
-#define IWL_POWER_SLEEP_OVER_DTIM_MSK __constant_cpu_to_le16(1 << 2)
-#define IWL_POWER_PCI_PM_MSK __constant_cpu_to_le16(1 << 3)
-#define IWL_POWER_FAST_PD __constant_cpu_to_le16(1 << 4)
+#define IWL_POWER_DRIVER_ALLOW_SLEEP_MSK cpu_to_le16(1 << 0)
+#define IWL_POWER_SLEEP_OVER_DTIM_MSK cpu_to_le16(1 << 2)
+#define IWL_POWER_PCI_PM_MSK cpu_to_le16(1 << 3)
+#define IWL_POWER_FAST_PD cpu_to_le16(1 << 4)
-struct iwl4965_powertable_cmd {
+struct iwl_powertable_cmd {
__le16 flags;
u8 keep_alive_seconds;
u8 debug_flags;
* PM_SLEEP_NOTIFICATION = 0x7A (notification only, not a command)
* 3945 and 4965 identical.
*/
-struct iwl4965_sleep_notification {
+struct iwl_sleep_notification {
u8 pm_sleep_mode;
u8 pm_wakeup_src;
__le16 reserved;
#define CARD_STATE_CMD_DISABLE 0x00 /* Put card to sleep */
#define CARD_STATE_CMD_ENABLE 0x01 /* Wake up card */
#define CARD_STATE_CMD_HALT 0x02 /* Power down permanently */
-struct iwl4965_card_state_cmd {
+struct iwl_card_state_cmd {
__le32 status; /* CARD_STATE_CMD_* request new power state */
} __attribute__ ((packed));
/*
* CARD_STATE_NOTIFICATION = 0xa1 (notification only, not a command)
*/
-struct iwl4965_card_state_notif {
+struct iwl_card_state_notif {
__le32 flags;
} __attribute__ ((packed));
*
*****************************************************************************/
+#define SCAN_CHANNEL_TYPE_PASSIVE cpu_to_le32(0)
+#define SCAN_CHANNEL_TYPE_ACTIVE cpu_to_le32(1)
+
/**
* struct iwl_scan_channel - entry in REPLY_SCAN_CMD channel table
*
/*
* type is defined as:
* 0:0 1 = active, 0 = passive
- * 1:4 SSID direct bit map; if a bit is set, then corresponding
+ * 1:20 SSID direct bit map; if a bit is set, then corresponding
* SSID IE is transmitted in probe request.
- * 5:7 reserved
+ * 21:31 reserved
*/
- u8 type;
- u8 channel; /* band is selected by iwl4965_scan_cmd "flags" field */
+ __le32 type;
+ __le16 channel; /* band is selected by iwl_scan_cmd "flags" field */
u8 tx_gain; /* gain for analog radio */
u8 dsp_atten; /* gain for DSP */
__le16 active_dwell; /* in 1024-uSec TU (time units), typ 5-50 */
* struct iwl_ssid_ie - directed scan network information element
*
* Up to 4 of these may appear in REPLY_SCAN_CMD, selected by "type" field
- * in struct iwl4965_scan_channel; each channel may select different ssids from
+ * in struct iwl_scan_channel; each channel may select different ssids from
* among the 4 entries. SSID IEs get transmitted in reverse order of entry.
*/
struct iwl_ssid_ie {
u8 ssid[32];
} __attribute__ ((packed));
-#define PROBE_OPTION_MAX 0x4
-#define TX_CMD_LIFE_TIME_INFINITE __constant_cpu_to_le32(0xFFFFFFFF)
-#define IWL_GOOD_CRC_TH __constant_cpu_to_le16(1)
+#define PROBE_OPTION_MAX 0x14
+#define TX_CMD_LIFE_TIME_INFINITE cpu_to_le32(0xFFFFFFFF)
+#define IWL_GOOD_CRC_TH cpu_to_le16(1)
#define IWL_MAX_SCAN_SIZE 1024
/*
* Number of channels in list is specified by channel_count.
* Each channel in list is of type:
*
- * struct iwl4965_scan_channel channels[0];
+ * struct iwl_scan_channel channels[0];
*
* NOTE: Only one band of channels can be scanned per pass. You
* must not mix 2.4GHz channels and 5.2GHz channels, and you must wait
} __attribute__ ((packed));
/* Can abort will notify by complete notification with abort status. */
-#define CAN_ABORT_STATUS __constant_cpu_to_le32(0x1)
+#define CAN_ABORT_STATUS cpu_to_le32(0x1)
/* complete notification statuses */
#define ABORT_STATUS 0x2
/*
* REPLY_TX_BEACON = 0x91 (command, has simple generic response)
*/
-struct iwl4965_tx_beacon_cmd {
+struct iwl_tx_beacon_cmd {
struct iwl_tx_cmd tx;
__le16 tim_idx;
u8 tim_size;
__le32 reserved2;
} __attribute__ ((packed));
+#define INTERFERENCE_DATA_AVAILABLE __constant_cpu_to_le32(1)
+
struct statistics_rx_non_phy {
__le32 bogus_cts; /* CTS received when not expecting CTS */
__le32 bogus_ack; /* ACK received when not expecting ACK */
* STATISTICS_NOTIFICATIONs after received beacons (see below). This flag
* does not affect the response to the REPLY_STATISTICS_CMD 0x9c itself.
*/
-#define IWL_STATS_CONF_CLEAR_STATS __constant_cpu_to_le32(0x1) /* see above */
-#define IWL_STATS_CONF_DISABLE_NOTIF __constant_cpu_to_le32(0x2)/* see above */
+#define IWL_STATS_CONF_CLEAR_STATS cpu_to_le32(0x1) /* see above */
+#define IWL_STATS_CONF_DISABLE_NOTIF cpu_to_le32(0x2)/* see above */
struct iwl_statistics_cmd {
__le32 configuration_flags; /* IWL_STATS_CONF_* */
} __attribute__ ((packed));
* appropriately so that each notification contains statistics for only the
* one channel that has just been scanned.
*/
-#define STATISTICS_REPLY_FLG_BAND_24G_MSK __constant_cpu_to_le32(0x2)
-#define STATISTICS_REPLY_FLG_FAT_MODE_MSK __constant_cpu_to_le32(0x8)
+#define STATISTICS_REPLY_FLG_BAND_24G_MSK cpu_to_le32(0x2)
+#define STATISTICS_REPLY_FLG_FAT_MODE_MSK cpu_to_le32(0x8)
struct iwl_notif_statistics {
__le32 flag;
struct statistics_rx rx;
* then this notification will be sent. */
#define CONSECUTIVE_MISSED_BCONS_TH 20
-struct iwl4965_missed_beacon_notif {
+struct iwl_missed_beacon_notif {
__le32 consequtive_missed_beacons;
__le32 total_missed_becons;
__le32 num_expected_beacons;
#define HD_OFDM_ENERGY_TH_IN_INDEX (10)
/* Control field in struct iwl_sensitivity_cmd */
-#define SENSITIVITY_CMD_CONTROL_DEFAULT_TABLE __constant_cpu_to_le16(0)
-#define SENSITIVITY_CMD_CONTROL_WORK_TABLE __constant_cpu_to_le16(1)
+#define SENSITIVITY_CMD_CONTROL_DEFAULT_TABLE cpu_to_le16(0)
+#define SENSITIVITY_CMD_CONTROL_WORK_TABLE cpu_to_le16(1)
/**
* struct iwl_sensitivity_cmd
* 1-0: amount of gain, units of 1.5 dB
*/
-/* "Differential Gain" opcode used in REPLY_PHY_CALIBRATION_CMD. */
-#define PHY_CALIBRATE_DIFF_GAIN_CMD (7)
-
-struct iwl4965_calibration_cmd {
- u8 opCode; /* PHY_CALIBRATE_DIFF_GAIN_CMD (7) */
- u8 flags; /* not used */
- __le16 reserved;
- s8 diff_gain_a; /* see above */
- s8 diff_gain_b;
- s8 diff_gain_c;
- u8 reserved1;
-} __attribute__ ((packed));
-
-/* Phy calibration command for 5000 series */
+/* Phy calibration command for series */
enum {
- IWL5000_PHY_CALIBRATE_DC_CMD = 8,
- IWL5000_PHY_CALIBRATE_LO_CMD = 9,
- IWL5000_PHY_CALIBRATE_RX_BB_CMD = 10,
- IWL5000_PHY_CALIBRATE_TX_IQ_CMD = 11,
- IWL5000_PHY_CALIBRATE_RX_IQ_CMD = 12,
- IWL5000_PHY_CALIBRATION_NOISE_CMD = 13,
- IWL5000_PHY_CALIBRATE_AGC_TABLE_CMD = 14,
- IWL5000_PHY_CALIBRATE_CRYSTAL_FRQ_CMD = 15,
- IWL5000_PHY_CALIBRATE_BASE_BAND_CMD = 16,
- IWL5000_PHY_CALIBRATE_TX_IQ_PERD_CMD = 17,
- IWL5000_PHY_CALIBRATE_CHAIN_NOISE_RESET_CMD = 18,
- IWL5000_PHY_CALIBRATE_CHAIN_NOISE_GAIN_CMD = 19,
-};
-
-enum {
- CALIBRATION_CFG_CMD = 0x65,
- CALIBRATION_RES_NOTIFICATION = 0x66,
- CALIBRATION_COMPLETE_NOTIFICATION = 0x67
+ IWL_PHY_CALIBRATE_DIFF_GAIN_CMD = 7,
+ IWL_PHY_CALIBRATE_DC_CMD = 8,
+ IWL_PHY_CALIBRATE_LO_CMD = 9,
+ IWL_PHY_CALIBRATE_RX_BB_CMD = 10,
+ IWL_PHY_CALIBRATE_TX_IQ_CMD = 11,
+ IWL_PHY_CALIBRATE_RX_IQ_CMD = 12,
+ IWL_PHY_CALIBRATION_NOISE_CMD = 13,
+ IWL_PHY_CALIBRATE_AGC_TABLE_CMD = 14,
+ IWL_PHY_CALIBRATE_CRYSTAL_FRQ_CMD = 15,
+ IWL_PHY_CALIBRATE_BASE_BAND_CMD = 16,
+ IWL_PHY_CALIBRATE_TX_IQ_PERD_CMD = 17,
+ IWL_PHY_CALIBRATE_CHAIN_NOISE_RESET_CMD = 18,
+ IWL_PHY_CALIBRATE_CHAIN_NOISE_GAIN_CMD = 19,
};
-struct iwl_cal_crystal_freq_cmd {
- u8 cap_pin1;
- u8 cap_pin2;
-} __attribute__ ((packed));
-
-struct iwl5000_calibration {
- u8 op_code;
- u8 first_group;
- u8 num_groups;
- u8 all_data_valid;
- struct iwl_cal_crystal_freq_cmd data;
-} __attribute__ ((packed));
-#define IWL_CALIB_INIT_CFG_ALL __constant_cpu_to_le32(0xffffffff)
+#define IWL_CALIB_INIT_CFG_ALL cpu_to_le32(0xffffffff)
struct iwl_calib_cfg_elmnt_s {
__le32 is_enable;
__le32 flags;
} __attribute__ ((packed));
-struct iwl5000_calib_cfg_cmd {
+struct iwl_calib_cfg_cmd {
struct iwl_calib_cfg_status_s ucd_calib_cfg;
struct iwl_calib_cfg_status_s drv_calib_cfg;
__le32 reserved1;
} __attribute__ ((packed));
-struct iwl5000_calib_hdr {
+struct iwl_calib_hdr {
u8 op_code;
u8 first_group;
u8 groups_num;
u8 data_valid;
} __attribute__ ((packed));
-struct iwl5000_calibration_chain_noise_reset_cmd {
- u8 op_code; /* IWL5000_PHY_CALIBRATE_CHAIN_NOISE_RESET_CMD */
- u8 flags; /* not used */
- __le16 reserved;
+struct iwl_calib_cmd {
+ struct iwl_calib_hdr hdr;
+ u8 data[0];
} __attribute__ ((packed));
-struct iwl5000_calibration_chain_noise_gain_cmd {
- u8 op_code; /* IWL5000_PHY_CALIBRATE_CHAIN_NOISE_GAIN_CMD */
- u8 flags; /* not used */
- __le16 reserved;
+/* IWL_PHY_CALIBRATE_DIFF_GAIN_CMD (7) */
+struct iwl_calib_diff_gain_cmd {
+ struct iwl_calib_hdr hdr;
+ s8 diff_gain_a; /* see above */
+ s8 diff_gain_b;
+ s8 diff_gain_c;
+ u8 reserved1;
+} __attribute__ ((packed));
+
+struct iwl_calib_xtal_freq_cmd {
+ struct iwl_calib_hdr hdr;
+ u8 cap_pin1;
+ u8 cap_pin2;
+ u8 pad[2];
+} __attribute__ ((packed));
+
+/* IWL_PHY_CALIBRATE_CHAIN_NOISE_RESET_CMD */
+struct iwl_calib_chain_noise_reset_cmd {
+ struct iwl_calib_hdr hdr;
+ u8 data[0];
+};
+
+/* IWL_PHY_CALIBRATE_CHAIN_NOISE_GAIN_CMD */
+struct iwl_calib_chain_noise_gain_cmd {
+ struct iwl_calib_hdr hdr;
u8 delta_gain_1;
u8 delta_gain_2;
- __le16 reserved1;
+ u8 pad[2];
} __attribute__ ((packed));
/******************************************************************************
* For each of 3 possible LEDs (Activity/Link/Tech, selected by "id" field),
* this command turns it on or off, or sets up a periodic blinking cycle.
*/
-struct iwl4965_led_cmd {
+struct iwl_led_cmd {
__le32 interval; /* "interval" in uSec */
u8 id; /* 1: Activity, 2: Link, 3: Tech */
u8 off; /* # intervals off while blinking;
/* COEX flag masks */
-/* Staion table is valid */
+/* Station table is valid */
#define COEX_FLAGS_STA_TABLE_VALID_MSK (0x1)
-/* UnMask wakeup src at unassociated sleep */
+/* UnMask wake up src at unassociated sleep */
#define COEX_FLAGS_UNASSOC_WA_UNMASK_MSK (0x4)
-/* UnMask wakeup src at associated sleep */
+/* UnMask wake up src at associated sleep */
#define COEX_FLAGS_ASSOC_WA_UNMASK_MSK (0x8)
/* Enable CoEx feature. */
#define COEX_FLAGS_COEX_ENABLE_MSK (0x80)
struct iwl_cmd_header hdr;
union {
struct iwl_alive_resp alive_frame;
- struct iwl4965_rx_frame rx_frame;
- struct iwl4965_tx_resp tx_resp;
- struct iwl4965_spectrum_notification spectrum_notif;
- struct iwl4965_csa_notification csa_notif;
+ struct iwl_spectrum_notification spectrum_notif;
+ struct iwl_csa_notification csa_notif;
struct iwl_error_resp err_resp;
- struct iwl4965_card_state_notif card_state_notif;
- struct iwl4965_beacon_notif beacon_status;
+ struct iwl_card_state_notif card_state_notif;
struct iwl_add_sta_resp add_sta;
struct iwl_rem_sta_resp rem_sta;
- struct iwl4965_sleep_notification sleep_notif;
- struct iwl4965_spectrum_resp spectrum;
+ struct iwl_sleep_notification sleep_notif;
+ struct iwl_spectrum_resp spectrum;
struct iwl_notif_statistics stats;
struct iwl_compressed_ba_resp compressed_ba;
- struct iwl4965_missed_beacon_notif missed_beacon;
- struct iwl5000_calibration calib;
+ struct iwl_missed_beacon_notif missed_beacon;
__le32 status;
u8 raw[0];
} u;
} __attribute__ ((packed));
-#define IWL_RX_FRAME_SIZE (4 + sizeof(struct iwl4965_rx_frame))
+int iwl_agn_check_rxon_cmd(struct iwl_rxon_cmd *rxon);
-#endif /* __iwl4965_commands_h__ */
+#endif /* __iwl_commands_h__ */