+++ /dev/null
-/******************************************************************************
-
- Copyright(c) 2003 - 2006 Intel Corporation. All rights reserved.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of version 2 of the GNU General Public License as
- published by the Free Software Foundation.
-
- This program is distributed in the hope that it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc., 59
- Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
- The full GNU General Public License is included in this distribution in the
- file called LICENSE.
-
- Contact Information:
- James P. Ketrenos <ipw2100-admin@linux.intel.com>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
- Portions of this file are based on the sample_* files provided by Wireless
- Extensions 0.26 package and copyright (c) 1997-2003 Jean Tourrilhes
- <jt@hpl.hp.com>
-
- Portions of this file are based on the Host AP project,
- Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
- <j@w1.fi>
- Copyright (c) 2002-2003, Jouni Malinen <j@w1.fi>
-
- Portions of ipw2100_mod_firmware_load, ipw2100_do_mod_firmware_load, and
- ipw2100_fw_load are loosely based on drivers/sound/sound_firmware.c
- available in the 2.4.25 kernel sources, and are copyright (c) Alan Cox
-
-******************************************************************************/
-/*
-
- Initial driver on which this is based was developed by Janusz Gorycki,
- Maciej Urbaniak, and Maciej Sosnowski.
-
- Promiscuous mode support added by Jacek Wysoczynski and Maciej Urbaniak.
-
-Theory of Operation
-
-Tx - Commands and Data
-
-Firmware and host share a circular queue of Transmit Buffer Descriptors (TBDs)
-Each TBD contains a pointer to the physical (dma_addr_t) address of data being
-sent to the firmware as well as the length of the data.
-
-The host writes to the TBD queue at the WRITE index. The WRITE index points
-to the _next_ packet to be written and is advanced when after the TBD has been
-filled.
-
-The firmware pulls from the TBD queue at the READ index. The READ index points
-to the currently being read entry, and is advanced once the firmware is
-done with a packet.
-
-When data is sent to the firmware, the first TBD is used to indicate to the
-firmware if a Command or Data is being sent. If it is Command, all of the
-command information is contained within the physical address referred to by the
-TBD. If it is Data, the first TBD indicates the type of data packet, number
-of fragments, etc. The next TBD then referrs to the actual packet location.
-
-The Tx flow cycle is as follows:
-
-1) ipw2100_tx() is called by kernel with SKB to transmit
-2) Packet is move from the tx_free_list and appended to the transmit pending
- list (tx_pend_list)
-3) work is scheduled to move pending packets into the shared circular queue.
-4) when placing packet in the circular queue, the incoming SKB is DMA mapped
- to a physical address. That address is entered into a TBD. Two TBDs are
- filled out. The first indicating a data packet, the second referring to the
- actual payload data.
-5) the packet is removed from tx_pend_list and placed on the end of the
- firmware pending list (fw_pend_list)
-6) firmware is notified that the WRITE index has
-7) Once the firmware has processed the TBD, INTA is triggered.
-8) For each Tx interrupt received from the firmware, the READ index is checked
- to see which TBDs are done being processed.
-9) For each TBD that has been processed, the ISR pulls the oldest packet
- from the fw_pend_list.
-10)The packet structure contained in the fw_pend_list is then used
- to unmap the DMA address and to free the SKB originally passed to the driver
- from the kernel.
-11)The packet structure is placed onto the tx_free_list
-
-The above steps are the same for commands, only the msg_free_list/msg_pend_list
-are used instead of tx_free_list/tx_pend_list
-
-...
-
-Critical Sections / Locking :
-
-There are two locks utilized. The first is the low level lock (priv->low_lock)
-that protects the following:
-
-- Access to the Tx/Rx queue lists via priv->low_lock. The lists are as follows:
-
- tx_free_list : Holds pre-allocated Tx buffers.
- TAIL modified in __ipw2100_tx_process()
- HEAD modified in ipw2100_tx()
-
- tx_pend_list : Holds used Tx buffers waiting to go into the TBD ring
- TAIL modified ipw2100_tx()
- HEAD modified by ipw2100_tx_send_data()
-
- msg_free_list : Holds pre-allocated Msg (Command) buffers
- TAIL modified in __ipw2100_tx_process()
- HEAD modified in ipw2100_hw_send_command()
-
- msg_pend_list : Holds used Msg buffers waiting to go into the TBD ring
- TAIL modified in ipw2100_hw_send_command()
- HEAD modified in ipw2100_tx_send_commands()
-
- The flow of data on the TX side is as follows:
-
- MSG_FREE_LIST + COMMAND => MSG_PEND_LIST => TBD => MSG_FREE_LIST
- TX_FREE_LIST + DATA => TX_PEND_LIST => TBD => TX_FREE_LIST
-
- The methods that work on the TBD ring are protected via priv->low_lock.
-
-- The internal data state of the device itself
-- Access to the firmware read/write indexes for the BD queues
- and associated logic
-
-All external entry functions are locked with the priv->action_lock to ensure
-that only one external action is invoked at a time.
-
-
-*/
-
-#include <linux/compiler.h>
-#include <linux/errno.h>
-#include <linux/if_arp.h>
-#include <linux/in6.h>
-#include <linux/in.h>
-#include <linux/ip.h>
-#include <linux/kernel.h>
-#include <linux/kmod.h>
-#include <linux/module.h>
-#include <linux/netdevice.h>
-#include <linux/ethtool.h>
-#include <linux/pci.h>
-#include <linux/dma-mapping.h>
-#include <linux/proc_fs.h>
-#include <linux/skbuff.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <linux/fs.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/unistd.h>
-#include <linux/stringify.h>
-#include <linux/tcp.h>
-#include <linux/types.h>
-#include <linux/time.h>
-#include <linux/firmware.h>
-#include <linux/acpi.h>
-#include <linux/ctype.h>
-#include <linux/pm_qos_params.h>
-
-#include <net/lib80211.h>
-
-#include "ipw2100.h"
-
-#define IPW2100_VERSION "git-1.2.2"
-
-#define DRV_NAME "ipw2100"
-#define DRV_VERSION IPW2100_VERSION
-#define DRV_DESCRIPTION "Intel(R) PRO/Wireless 2100 Network Driver"
-#define DRV_COPYRIGHT "Copyright(c) 2003-2006 Intel Corporation"
-
-/* Debugging stuff */
-#ifdef CONFIG_IPW2100_DEBUG
-#define IPW2100_RX_DEBUG /* Reception debugging */
-#endif
-
-MODULE_DESCRIPTION(DRV_DESCRIPTION);
-MODULE_VERSION(DRV_VERSION);
-MODULE_AUTHOR(DRV_COPYRIGHT);
-MODULE_LICENSE("GPL");
-
-static int debug = 0;
-static int mode = 0;
-static int channel = 0;
-static int associate = 0;
-static int disable = 0;
-#ifdef CONFIG_PM
-static struct ipw2100_fw ipw2100_firmware;
-#endif
-
-#include <linux/moduleparam.h>
-module_param(debug, int, 0444);
-module_param(mode, int, 0444);
-module_param(channel, int, 0444);
-module_param(associate, int, 0444);
-module_param(disable, int, 0444);
-
-MODULE_PARM_DESC(debug, "debug level");
-MODULE_PARM_DESC(mode, "network mode (0=BSS,1=IBSS,2=Monitor)");
-MODULE_PARM_DESC(channel, "channel");
-MODULE_PARM_DESC(associate, "auto associate when scanning (default off)");
-MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])");
-
-static u32 ipw2100_debug_level = IPW_DL_NONE;
-
-#ifdef CONFIG_IPW2100_DEBUG
-#define IPW_DEBUG(level, message...) \
-do { \
- if (ipw2100_debug_level & (level)) { \
- printk(KERN_DEBUG "ipw2100: %c %s ", \
- in_interrupt() ? 'I' : 'U', __func__); \
- printk(message); \
- } \
-} while (0)
-#else
-#define IPW_DEBUG(level, message...) do {} while (0)
-#endif /* CONFIG_IPW2100_DEBUG */
-
-#ifdef CONFIG_IPW2100_DEBUG
-static const char *command_types[] = {
- "undefined",
- "unused", /* HOST_ATTENTION */
- "HOST_COMPLETE",
- "unused", /* SLEEP */
- "unused", /* HOST_POWER_DOWN */
- "unused",
- "SYSTEM_CONFIG",
- "unused", /* SET_IMR */
- "SSID",
- "MANDATORY_BSSID",
- "AUTHENTICATION_TYPE",
- "ADAPTER_ADDRESS",
- "PORT_TYPE",
- "INTERNATIONAL_MODE",
- "CHANNEL",
- "RTS_THRESHOLD",
- "FRAG_THRESHOLD",
- "POWER_MODE",
- "TX_RATES",
- "BASIC_TX_RATES",
- "WEP_KEY_INFO",
- "unused",
- "unused",
- "unused",
- "unused",
- "WEP_KEY_INDEX",
- "WEP_FLAGS",
- "ADD_MULTICAST",
- "CLEAR_ALL_MULTICAST",
- "BEACON_INTERVAL",
- "ATIM_WINDOW",
- "CLEAR_STATISTICS",
- "undefined",
- "undefined",
- "undefined",
- "undefined",
- "TX_POWER_INDEX",
- "undefined",
- "undefined",
- "undefined",
- "undefined",
- "undefined",
- "undefined",
- "BROADCAST_SCAN",
- "CARD_DISABLE",
- "PREFERRED_BSSID",
- "SET_SCAN_OPTIONS",
- "SCAN_DWELL_TIME",
- "SWEEP_TABLE",
- "AP_OR_STATION_TABLE",
- "GROUP_ORDINALS",
- "SHORT_RETRY_LIMIT",
- "LONG_RETRY_LIMIT",
- "unused", /* SAVE_CALIBRATION */
- "unused", /* RESTORE_CALIBRATION */
- "undefined",
- "undefined",
- "undefined",
- "HOST_PRE_POWER_DOWN",
- "unused", /* HOST_INTERRUPT_COALESCING */
- "undefined",
- "CARD_DISABLE_PHY_OFF",
- "MSDU_TX_RATES" "undefined",
- "undefined",
- "SET_STATION_STAT_BITS",
- "CLEAR_STATIONS_STAT_BITS",
- "LEAP_ROGUE_MODE",
- "SET_SECURITY_INFORMATION",
- "DISASSOCIATION_BSSID",
- "SET_WPA_ASS_IE"
-};
-#endif
-
-/* Pre-decl until we get the code solid and then we can clean it up */
-static void ipw2100_tx_send_commands(struct ipw2100_priv *priv);
-static void ipw2100_tx_send_data(struct ipw2100_priv *priv);
-static int ipw2100_adapter_setup(struct ipw2100_priv *priv);
-
-static void ipw2100_queues_initialize(struct ipw2100_priv *priv);
-static void ipw2100_queues_free(struct ipw2100_priv *priv);
-static int ipw2100_queues_allocate(struct ipw2100_priv *priv);
-
-static int ipw2100_fw_download(struct ipw2100_priv *priv,
- struct ipw2100_fw *fw);
-static int ipw2100_get_firmware(struct ipw2100_priv *priv,
- struct ipw2100_fw *fw);
-static int ipw2100_get_fwversion(struct ipw2100_priv *priv, char *buf,
- size_t max);
-static int ipw2100_get_ucodeversion(struct ipw2100_priv *priv, char *buf,
- size_t max);
-static void ipw2100_release_firmware(struct ipw2100_priv *priv,
- struct ipw2100_fw *fw);
-static int ipw2100_ucode_download(struct ipw2100_priv *priv,
- struct ipw2100_fw *fw);
-static void ipw2100_wx_event_work(struct work_struct *work);
-static struct iw_statistics *ipw2100_wx_wireless_stats(struct net_device *dev);
-static struct iw_handler_def ipw2100_wx_handler_def;
-
-static inline void read_register(struct net_device *dev, u32 reg, u32 * val)
-{
- *val = readl((void __iomem *)(dev->base_addr + reg));
- IPW_DEBUG_IO("r: 0x%08X => 0x%08X\n", reg, *val);
-}
-
-static inline void write_register(struct net_device *dev, u32 reg, u32 val)
-{
- writel(val, (void __iomem *)(dev->base_addr + reg));
- IPW_DEBUG_IO("w: 0x%08X <= 0x%08X\n", reg, val);
-}
-
-static inline void read_register_word(struct net_device *dev, u32 reg,
- u16 * val)
-{
- *val = readw((void __iomem *)(dev->base_addr + reg));
- IPW_DEBUG_IO("r: 0x%08X => %04X\n", reg, *val);
-}
-
-static inline void read_register_byte(struct net_device *dev, u32 reg, u8 * val)
-{
- *val = readb((void __iomem *)(dev->base_addr + reg));
- IPW_DEBUG_IO("r: 0x%08X => %02X\n", reg, *val);
-}
-
-static inline void write_register_word(struct net_device *dev, u32 reg, u16 val)
-{
- writew(val, (void __iomem *)(dev->base_addr + reg));
- IPW_DEBUG_IO("w: 0x%08X <= %04X\n", reg, val);
-}
-
-static inline void write_register_byte(struct net_device *dev, u32 reg, u8 val)
-{
- writeb(val, (void __iomem *)(dev->base_addr + reg));
- IPW_DEBUG_IO("w: 0x%08X =< %02X\n", reg, val);
-}
-
-static inline void read_nic_dword(struct net_device *dev, u32 addr, u32 * val)
-{
- write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
- addr & IPW_REG_INDIRECT_ADDR_MASK);
- read_register(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
-}
-
-static inline void write_nic_dword(struct net_device *dev, u32 addr, u32 val)
-{
- write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
- addr & IPW_REG_INDIRECT_ADDR_MASK);
- write_register(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
-}
-
-static inline void read_nic_word(struct net_device *dev, u32 addr, u16 * val)
-{
- write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
- addr & IPW_REG_INDIRECT_ADDR_MASK);
- read_register_word(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
-}
-
-static inline void write_nic_word(struct net_device *dev, u32 addr, u16 val)
-{
- write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
- addr & IPW_REG_INDIRECT_ADDR_MASK);
- write_register_word(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
-}
-
-static inline void read_nic_byte(struct net_device *dev, u32 addr, u8 * val)
-{
- write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
- addr & IPW_REG_INDIRECT_ADDR_MASK);
- read_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
-}
-
-static inline void write_nic_byte(struct net_device *dev, u32 addr, u8 val)
-{
- write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
- addr & IPW_REG_INDIRECT_ADDR_MASK);
- write_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
-}
-
-static inline void write_nic_auto_inc_address(struct net_device *dev, u32 addr)
-{
- write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS,
- addr & IPW_REG_INDIRECT_ADDR_MASK);
-}
-
-static inline void write_nic_dword_auto_inc(struct net_device *dev, u32 val)
-{
- write_register(dev, IPW_REG_AUTOINCREMENT_DATA, val);
-}
-
-static void write_nic_memory(struct net_device *dev, u32 addr, u32 len,
- const u8 * buf)
-{
- u32 aligned_addr;
- u32 aligned_len;
- u32 dif_len;
- u32 i;
-
- /* read first nibble byte by byte */
- aligned_addr = addr & (~0x3);
- dif_len = addr - aligned_addr;
- if (dif_len) {
- /* Start reading at aligned_addr + dif_len */
- write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
- aligned_addr);
- for (i = dif_len; i < 4; i++, buf++)
- write_register_byte(dev,
- IPW_REG_INDIRECT_ACCESS_DATA + i,
- *buf);
-
- len -= dif_len;
- aligned_addr += 4;
- }
-
- /* read DWs through autoincrement registers */
- write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS, aligned_addr);
- aligned_len = len & (~0x3);
- for (i = 0; i < aligned_len; i += 4, buf += 4, aligned_addr += 4)
- write_register(dev, IPW_REG_AUTOINCREMENT_DATA, *(u32 *) buf);
-
- /* copy the last nibble */
- dif_len = len - aligned_len;
- write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, aligned_addr);
- for (i = 0; i < dif_len; i++, buf++)
- write_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA + i,
- *buf);
-}
-
-static void read_nic_memory(struct net_device *dev, u32 addr, u32 len,
- u8 * buf)
-{
- u32 aligned_addr;
- u32 aligned_len;
- u32 dif_len;
- u32 i;
-
- /* read first nibble byte by byte */
- aligned_addr = addr & (~0x3);
- dif_len = addr - aligned_addr;
- if (dif_len) {
- /* Start reading at aligned_addr + dif_len */
- write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
- aligned_addr);
- for (i = dif_len; i < 4; i++, buf++)
- read_register_byte(dev,
- IPW_REG_INDIRECT_ACCESS_DATA + i,
- buf);
-
- len -= dif_len;
- aligned_addr += 4;
- }
-
- /* read DWs through autoincrement registers */
- write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS, aligned_addr);
- aligned_len = len & (~0x3);
- for (i = 0; i < aligned_len; i += 4, buf += 4, aligned_addr += 4)
- read_register(dev, IPW_REG_AUTOINCREMENT_DATA, (u32 *) buf);
-
- /* copy the last nibble */
- dif_len = len - aligned_len;
- write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, aligned_addr);
- for (i = 0; i < dif_len; i++, buf++)
- read_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA + i, buf);
-}
-
-static inline int ipw2100_hw_is_adapter_in_system(struct net_device *dev)
-{
- return (dev->base_addr &&
- (readl
- ((void __iomem *)(dev->base_addr +
- IPW_REG_DOA_DEBUG_AREA_START))
- == IPW_DATA_DOA_DEBUG_VALUE));
-}
-
-static int ipw2100_get_ordinal(struct ipw2100_priv *priv, u32 ord,
- void *val, u32 * len)
-{
- struct ipw2100_ordinals *ordinals = &priv->ordinals;
- u32 addr;
- u32 field_info;
- u16 field_len;
- u16 field_count;
- u32 total_length;
-
- if (ordinals->table1_addr == 0) {
- printk(KERN_WARNING DRV_NAME ": attempt to use fw ordinals "
- "before they have been loaded.\n");
- return -EINVAL;
- }
-
- if (IS_ORDINAL_TABLE_ONE(ordinals, ord)) {
- if (*len < IPW_ORD_TAB_1_ENTRY_SIZE) {
- *len = IPW_ORD_TAB_1_ENTRY_SIZE;
-
- printk(KERN_WARNING DRV_NAME
- ": ordinal buffer length too small, need %zd\n",
- IPW_ORD_TAB_1_ENTRY_SIZE);
-
- return -EINVAL;
- }
-
- read_nic_dword(priv->net_dev,
- ordinals->table1_addr + (ord << 2), &addr);
- read_nic_dword(priv->net_dev, addr, val);
-
- *len = IPW_ORD_TAB_1_ENTRY_SIZE;
-
- return 0;
- }
-
- if (IS_ORDINAL_TABLE_TWO(ordinals, ord)) {
-
- ord -= IPW_START_ORD_TAB_2;
-
- /* get the address of statistic */
- read_nic_dword(priv->net_dev,
- ordinals->table2_addr + (ord << 3), &addr);
-
- /* get the second DW of statistics ;
- * two 16-bit words - first is length, second is count */
- read_nic_dword(priv->net_dev,
- ordinals->table2_addr + (ord << 3) + sizeof(u32),
- &field_info);
-
- /* get each entry length */
- field_len = *((u16 *) & field_info);
-
- /* get number of entries */
- field_count = *(((u16 *) & field_info) + 1);
-
- /* abort if no enought memory */
- total_length = field_len * field_count;
- if (total_length > *len) {
- *len = total_length;
- return -EINVAL;
- }
-
- *len = total_length;
- if (!total_length)
- return 0;
-
- /* read the ordinal data from the SRAM */
- read_nic_memory(priv->net_dev, addr, total_length, val);
-
- return 0;
- }
-
- printk(KERN_WARNING DRV_NAME ": ordinal %d neither in table 1 nor "
- "in table 2\n", ord);
-
- return -EINVAL;
-}
-
-static int ipw2100_set_ordinal(struct ipw2100_priv *priv, u32 ord, u32 * val,
- u32 * len)
-{
- struct ipw2100_ordinals *ordinals = &priv->ordinals;
- u32 addr;
-
- if (IS_ORDINAL_TABLE_ONE(ordinals, ord)) {
- if (*len != IPW_ORD_TAB_1_ENTRY_SIZE) {
- *len = IPW_ORD_TAB_1_ENTRY_SIZE;
- IPW_DEBUG_INFO("wrong size\n");
- return -EINVAL;
- }
-
- read_nic_dword(priv->net_dev,
- ordinals->table1_addr + (ord << 2), &addr);
-
- write_nic_dword(priv->net_dev, addr, *val);
-
- *len = IPW_ORD_TAB_1_ENTRY_SIZE;
-
- return 0;
- }
-
- IPW_DEBUG_INFO("wrong table\n");
- if (IS_ORDINAL_TABLE_TWO(ordinals, ord))
- return -EINVAL;
-
- return -EINVAL;
-}
-
-static char *snprint_line(char *buf, size_t count,
- const u8 * data, u32 len, u32 ofs)
-{
- int out, i, j, l;
- char c;
-
- out = snprintf(buf, count, "%08X", ofs);
-
- for (l = 0, i = 0; i < 2; i++) {
- out += snprintf(buf + out, count - out, " ");
- for (j = 0; j < 8 && l < len; j++, l++)
- out += snprintf(buf + out, count - out, "%02X ",
- data[(i * 8 + j)]);
- for (; j < 8; j++)
- out += snprintf(buf + out, count - out, " ");
- }
-
- out += snprintf(buf + out, count - out, " ");
- for (l = 0, i = 0; i < 2; i++) {
- out += snprintf(buf + out, count - out, " ");
- for (j = 0; j < 8 && l < len; j++, l++) {
- c = data[(i * 8 + j)];
- if (!isascii(c) || !isprint(c))
- c = '.';
-
- out += snprintf(buf + out, count - out, "%c", c);
- }
-
- for (; j < 8; j++)
- out += snprintf(buf + out, count - out, " ");
- }
-
- return buf;
-}
-
-static void printk_buf(int level, const u8 * data, u32 len)
-{
- char line[81];
- u32 ofs = 0;
- if (!(ipw2100_debug_level & level))
- return;
-
- while (len) {
- printk(KERN_DEBUG "%s\n",
- snprint_line(line, sizeof(line), &data[ofs],
- min(len, 16U), ofs));
- ofs += 16;
- len -= min(len, 16U);
- }
-}
-
-#define MAX_RESET_BACKOFF 10
-
-static void schedule_reset(struct ipw2100_priv *priv)
-{
- unsigned long now = get_seconds();
-
- /* If we haven't received a reset request within the backoff period,
- * then we can reset the backoff interval so this reset occurs
- * immediately */
- if (priv->reset_backoff &&
- (now - priv->last_reset > priv->reset_backoff))
- priv->reset_backoff = 0;
-
- priv->last_reset = get_seconds();
-
- if (!(priv->status & STATUS_RESET_PENDING)) {
- IPW_DEBUG_INFO("%s: Scheduling firmware restart (%ds).\n",
- priv->net_dev->name, priv->reset_backoff);
- netif_carrier_off(priv->net_dev);
- netif_stop_queue(priv->net_dev);
- priv->status |= STATUS_RESET_PENDING;
- if (priv->reset_backoff)
- queue_delayed_work(priv->workqueue, &priv->reset_work,
- priv->reset_backoff * HZ);
- else
- queue_delayed_work(priv->workqueue, &priv->reset_work,
- 0);
-
- if (priv->reset_backoff < MAX_RESET_BACKOFF)
- priv->reset_backoff++;
-
- wake_up_interruptible(&priv->wait_command_queue);
- } else
- IPW_DEBUG_INFO("%s: Firmware restart already in progress.\n",
- priv->net_dev->name);
-
-}
-
-#define HOST_COMPLETE_TIMEOUT (2 * HZ)
-static int ipw2100_hw_send_command(struct ipw2100_priv *priv,
- struct host_command *cmd)
-{
- struct list_head *element;
- struct ipw2100_tx_packet *packet;
- unsigned long flags;
- int err = 0;
-
- IPW_DEBUG_HC("Sending %s command (#%d), %d bytes\n",
- command_types[cmd->host_command], cmd->host_command,
- cmd->host_command_length);
- printk_buf(IPW_DL_HC, (u8 *) cmd->host_command_parameters,
- cmd->host_command_length);
-
- spin_lock_irqsave(&priv->low_lock, flags);
-
- if (priv->fatal_error) {
- IPW_DEBUG_INFO
- ("Attempt to send command while hardware in fatal error condition.\n");
- err = -EIO;
- goto fail_unlock;
- }
-
- if (!(priv->status & STATUS_RUNNING)) {
- IPW_DEBUG_INFO
- ("Attempt to send command while hardware is not running.\n");
- err = -EIO;
- goto fail_unlock;
- }
-
- if (priv->status & STATUS_CMD_ACTIVE) {
- IPW_DEBUG_INFO
- ("Attempt to send command while another command is pending.\n");
- err = -EBUSY;
- goto fail_unlock;
- }
-
- if (list_empty(&priv->msg_free_list)) {
- IPW_DEBUG_INFO("no available msg buffers\n");
- goto fail_unlock;
- }
-
- priv->status |= STATUS_CMD_ACTIVE;
- priv->messages_sent++;
-
- element = priv->msg_free_list.next;
-
- packet = list_entry(element, struct ipw2100_tx_packet, list);
- packet->jiffy_start = jiffies;
-
- /* initialize the firmware command packet */
- packet->info.c_struct.cmd->host_command_reg = cmd->host_command;
- packet->info.c_struct.cmd->host_command_reg1 = cmd->host_command1;
- packet->info.c_struct.cmd->host_command_len_reg =
- cmd->host_command_length;
- packet->info.c_struct.cmd->sequence = cmd->host_command_sequence;
-
- memcpy(packet->info.c_struct.cmd->host_command_params_reg,
- cmd->host_command_parameters,
- sizeof(packet->info.c_struct.cmd->host_command_params_reg));
-
- list_del(element);
- DEC_STAT(&priv->msg_free_stat);
-
- list_add_tail(element, &priv->msg_pend_list);
- INC_STAT(&priv->msg_pend_stat);
-
- ipw2100_tx_send_commands(priv);
- ipw2100_tx_send_data(priv);
-
- spin_unlock_irqrestore(&priv->low_lock, flags);
-
- /*
- * We must wait for this command to complete before another
- * command can be sent... but if we wait more than 3 seconds
- * then there is a problem.
- */
-
- err =
- wait_event_interruptible_timeout(priv->wait_command_queue,
- !(priv->
- status & STATUS_CMD_ACTIVE),
- HOST_COMPLETE_TIMEOUT);
-
- if (err == 0) {
- IPW_DEBUG_INFO("Command completion failed out after %dms.\n",
- 1000 * (HOST_COMPLETE_TIMEOUT / HZ));
- priv->fatal_error = IPW2100_ERR_MSG_TIMEOUT;
- priv->status &= ~STATUS_CMD_ACTIVE;
- schedule_reset(priv);
- return -EIO;
- }
-
- if (priv->fatal_error) {
- printk(KERN_WARNING DRV_NAME ": %s: firmware fatal error\n",
- priv->net_dev->name);
- return -EIO;
- }
-
- /* !!!!! HACK TEST !!!!!
- * When lots of debug trace statements are enabled, the driver
- * doesn't seem to have as many firmware restart cycles...
- *
- * As a test, we're sticking in a 1/100s delay here */
- schedule_timeout_uninterruptible(msecs_to_jiffies(10));
-
- return 0;
-
- fail_unlock:
- spin_unlock_irqrestore(&priv->low_lock, flags);
-
- return err;
-}
-
-/*
- * Verify the values and data access of the hardware
- * No locks needed or used. No functions called.
- */
-static int ipw2100_verify(struct ipw2100_priv *priv)
-{
- u32 data1, data2;
- u32 address;
-
- u32 val1 = 0x76543210;
- u32 val2 = 0xFEDCBA98;
-
- /* Domain 0 check - all values should be DOA_DEBUG */
- for (address = IPW_REG_DOA_DEBUG_AREA_START;
- address < IPW_REG_DOA_DEBUG_AREA_END; address += sizeof(u32)) {
- read_register(priv->net_dev, address, &data1);
- if (data1 != IPW_DATA_DOA_DEBUG_VALUE)
- return -EIO;
- }
-
- /* Domain 1 check - use arbitrary read/write compare */
- for (address = 0; address < 5; address++) {
- /* The memory area is not used now */
- write_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x32,
- val1);
- write_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x36,
- val2);
- read_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x32,
- &data1);
- read_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x36,
- &data2);
- if (val1 == data1 && val2 == data2)
- return 0;
- }
-
- return -EIO;
-}
-
-/*
- *
- * Loop until the CARD_DISABLED bit is the same value as the
- * supplied parameter
- *
- * TODO: See if it would be more efficient to do a wait/wake
- * cycle and have the completion event trigger the wakeup
- *
- */
-#define IPW_CARD_DISABLE_COMPLETE_WAIT 100 // 100 milli
-static int ipw2100_wait_for_card_state(struct ipw2100_priv *priv, int state)
-{
- int i;
- u32 card_state;
- u32 len = sizeof(card_state);
- int err;
-
- for (i = 0; i <= IPW_CARD_DISABLE_COMPLETE_WAIT * 1000; i += 50) {
- err = ipw2100_get_ordinal(priv, IPW_ORD_CARD_DISABLED,
- &card_state, &len);
- if (err) {
- IPW_DEBUG_INFO("Query of CARD_DISABLED ordinal "
- "failed.\n");
- return 0;
- }
-
- /* We'll break out if either the HW state says it is
- * in the state we want, or if HOST_COMPLETE command
- * finishes */
- if ((card_state == state) ||
- ((priv->status & STATUS_ENABLED) ?
- IPW_HW_STATE_ENABLED : IPW_HW_STATE_DISABLED) == state) {
- if (state == IPW_HW_STATE_ENABLED)
- priv->status |= STATUS_ENABLED;
- else
- priv->status &= ~STATUS_ENABLED;
-
- return 0;
- }
-
- udelay(50);
- }
-
- IPW_DEBUG_INFO("ipw2100_wait_for_card_state to %s state timed out\n",
- state ? "DISABLED" : "ENABLED");
- return -EIO;
-}
-
-/*********************************************************************
- Procedure : sw_reset_and_clock
- Purpose : Asserts s/w reset, asserts clock initialization
- and waits for clock stabilization
- ********************************************************************/
-static int sw_reset_and_clock(struct ipw2100_priv *priv)
-{
- int i;
- u32 r;
-
- // assert s/w reset
- write_register(priv->net_dev, IPW_REG_RESET_REG,
- IPW_AUX_HOST_RESET_REG_SW_RESET);
-
- // wait for clock stabilization
- for (i = 0; i < 1000; i++) {
- udelay(IPW_WAIT_RESET_ARC_COMPLETE_DELAY);
-
- // check clock ready bit
- read_register(priv->net_dev, IPW_REG_RESET_REG, &r);
- if (r & IPW_AUX_HOST_RESET_REG_PRINCETON_RESET)
- break;
- }
-
- if (i == 1000)
- return -EIO; // TODO: better error value
-
- /* set "initialization complete" bit to move adapter to
- * D0 state */
- write_register(priv->net_dev, IPW_REG_GP_CNTRL,
- IPW_AUX_HOST_GP_CNTRL_BIT_INIT_DONE);
-
- /* wait for clock stabilization */
- for (i = 0; i < 10000; i++) {
- udelay(IPW_WAIT_CLOCK_STABILIZATION_DELAY * 4);
-
- /* check clock ready bit */
- read_register(priv->net_dev, IPW_REG_GP_CNTRL, &r);
- if (r & IPW_AUX_HOST_GP_CNTRL_BIT_CLOCK_READY)
- break;
- }
-
- if (i == 10000)
- return -EIO; /* TODO: better error value */
-
- /* set D0 standby bit */
- read_register(priv->net_dev, IPW_REG_GP_CNTRL, &r);
- write_register(priv->net_dev, IPW_REG_GP_CNTRL,
- r | IPW_AUX_HOST_GP_CNTRL_BIT_HOST_ALLOWS_STANDBY);
-
- return 0;
-}
-
-/*********************************************************************
- Procedure : ipw2100_download_firmware
- Purpose : Initiaze adapter after power on.
- The sequence is:
- 1. assert s/w reset first!
- 2. awake clocks & wait for clock stabilization
- 3. hold ARC (don't ask me why...)
- 4. load Dino ucode and reset/clock init again
- 5. zero-out shared mem
- 6. download f/w
- *******************************************************************/
-static int ipw2100_download_firmware(struct ipw2100_priv *priv)
-{
- u32 address;
- int err;
-
-#ifndef CONFIG_PM
- /* Fetch the firmware and microcode */
- struct ipw2100_fw ipw2100_firmware;
-#endif
-
- if (priv->fatal_error) {
- IPW_DEBUG_ERROR("%s: ipw2100_download_firmware called after "
- "fatal error %d. Interface must be brought down.\n",
- priv->net_dev->name, priv->fatal_error);
- return -EINVAL;
- }
-#ifdef CONFIG_PM
- if (!ipw2100_firmware.version) {
- err = ipw2100_get_firmware(priv, &ipw2100_firmware);
- if (err) {
- IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n",
- priv->net_dev->name, err);
- priv->fatal_error = IPW2100_ERR_FW_LOAD;
- goto fail;
- }
- }
-#else
- err = ipw2100_get_firmware(priv, &ipw2100_firmware);
- if (err) {
- IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n",
- priv->net_dev->name, err);
- priv->fatal_error = IPW2100_ERR_FW_LOAD;
- goto fail;
- }
-#endif
- priv->firmware_version = ipw2100_firmware.version;
-
- /* s/w reset and clock stabilization */
- err = sw_reset_and_clock(priv);
- if (err) {
- IPW_DEBUG_ERROR("%s: sw_reset_and_clock failed: %d\n",
- priv->net_dev->name, err);
- goto fail;
- }
-
- err = ipw2100_verify(priv);
- if (err) {
- IPW_DEBUG_ERROR("%s: ipw2100_verify failed: %d\n",
- priv->net_dev->name, err);
- goto fail;
- }
-
- /* Hold ARC */
- write_nic_dword(priv->net_dev,
- IPW_INTERNAL_REGISTER_HALT_AND_RESET, 0x80000000);
-
- /* allow ARC to run */
- write_register(priv->net_dev, IPW_REG_RESET_REG, 0);
-
- /* load microcode */
- err = ipw2100_ucode_download(priv, &ipw2100_firmware);
- if (err) {
- printk(KERN_ERR DRV_NAME ": %s: Error loading microcode: %d\n",
- priv->net_dev->name, err);
- goto fail;
- }
-
- /* release ARC */
- write_nic_dword(priv->net_dev,
- IPW_INTERNAL_REGISTER_HALT_AND_RESET, 0x00000000);
-
- /* s/w reset and clock stabilization (again!!!) */
- err = sw_reset_and_clock(priv);
- if (err) {
- printk(KERN_ERR DRV_NAME
- ": %s: sw_reset_and_clock failed: %d\n",
- priv->net_dev->name, err);
- goto fail;
- }
-
- /* load f/w */
- err = ipw2100_fw_download(priv, &ipw2100_firmware);
- if (err) {
- IPW_DEBUG_ERROR("%s: Error loading firmware: %d\n",
- priv->net_dev->name, err);
- goto fail;
- }
-#ifndef CONFIG_PM
- /*
- * When the .resume method of the driver is called, the other
- * part of the system, i.e. the ide driver could still stay in
- * the suspend stage. This prevents us from loading the firmware
- * from the disk. --YZ
- */
-
- /* free any storage allocated for firmware image */
- ipw2100_release_firmware(priv, &ipw2100_firmware);
-#endif
-
- /* zero out Domain 1 area indirectly (Si requirement) */
- for (address = IPW_HOST_FW_SHARED_AREA0;
- address < IPW_HOST_FW_SHARED_AREA0_END; address += 4)
- write_nic_dword(priv->net_dev, address, 0);
- for (address = IPW_HOST_FW_SHARED_AREA1;
- address < IPW_HOST_FW_SHARED_AREA1_END; address += 4)
- write_nic_dword(priv->net_dev, address, 0);
- for (address = IPW_HOST_FW_SHARED_AREA2;
- address < IPW_HOST_FW_SHARED_AREA2_END; address += 4)
- write_nic_dword(priv->net_dev, address, 0);
- for (address = IPW_HOST_FW_SHARED_AREA3;
- address < IPW_HOST_FW_SHARED_AREA3_END; address += 4)
- write_nic_dword(priv->net_dev, address, 0);
- for (address = IPW_HOST_FW_INTERRUPT_AREA;
- address < IPW_HOST_FW_INTERRUPT_AREA_END; address += 4)
- write_nic_dword(priv->net_dev, address, 0);
-
- return 0;
-
- fail:
- ipw2100_release_firmware(priv, &ipw2100_firmware);
- return err;
-}
-
-static inline void ipw2100_enable_interrupts(struct ipw2100_priv *priv)
-{
- if (priv->status & STATUS_INT_ENABLED)
- return;
- priv->status |= STATUS_INT_ENABLED;
- write_register(priv->net_dev, IPW_REG_INTA_MASK, IPW_INTERRUPT_MASK);
-}
-
-static inline void ipw2100_disable_interrupts(struct ipw2100_priv *priv)
-{
- if (!(priv->status & STATUS_INT_ENABLED))
- return;
- priv->status &= ~STATUS_INT_ENABLED;
- write_register(priv->net_dev, IPW_REG_INTA_MASK, 0x0);
-}
-
-static void ipw2100_initialize_ordinals(struct ipw2100_priv *priv)
-{
- struct ipw2100_ordinals *ord = &priv->ordinals;
-
- IPW_DEBUG_INFO("enter\n");
-
- read_register(priv->net_dev, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_1,
- &ord->table1_addr);
-
- read_register(priv->net_dev, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_2,
- &ord->table2_addr);
-
- read_nic_dword(priv->net_dev, ord->table1_addr, &ord->table1_size);
- read_nic_dword(priv->net_dev, ord->table2_addr, &ord->table2_size);
-
- ord->table2_size &= 0x0000FFFF;
-
- IPW_DEBUG_INFO("table 1 size: %d\n", ord->table1_size);
- IPW_DEBUG_INFO("table 2 size: %d\n", ord->table2_size);
- IPW_DEBUG_INFO("exit\n");
-}
-
-static inline void ipw2100_hw_set_gpio(struct ipw2100_priv *priv)
-{
- u32 reg = 0;
- /*
- * Set GPIO 3 writable by FW; GPIO 1 writable
- * by driver and enable clock
- */
- reg = (IPW_BIT_GPIO_GPIO3_MASK | IPW_BIT_GPIO_GPIO1_ENABLE |
- IPW_BIT_GPIO_LED_OFF);
- write_register(priv->net_dev, IPW_REG_GPIO, reg);
-}
-
-static int rf_kill_active(struct ipw2100_priv *priv)
-{
-#define MAX_RF_KILL_CHECKS 5
-#define RF_KILL_CHECK_DELAY 40
-
- unsigned short value = 0;
- u32 reg = 0;
- int i;
-
- if (!(priv->hw_features & HW_FEATURE_RFKILL)) {
- priv->status &= ~STATUS_RF_KILL_HW;
- return 0;
- }
-
- for (i = 0; i < MAX_RF_KILL_CHECKS; i++) {
- udelay(RF_KILL_CHECK_DELAY);
- read_register(priv->net_dev, IPW_REG_GPIO, ®);
- value = (value << 1) | ((reg & IPW_BIT_GPIO_RF_KILL) ? 0 : 1);
- }
-
- if (value == 0)
- priv->status |= STATUS_RF_KILL_HW;
- else
- priv->status &= ~STATUS_RF_KILL_HW;
-
- return (value == 0);
-}
-
-static int ipw2100_get_hw_features(struct ipw2100_priv *priv)
-{
- u32 addr, len;
- u32 val;
-
- /*
- * EEPROM_SRAM_DB_START_ADDRESS using ordinal in ordinal table 1
- */
- len = sizeof(addr);
- if (ipw2100_get_ordinal
- (priv, IPW_ORD_EEPROM_SRAM_DB_BLOCK_START_ADDRESS, &addr, &len)) {
- IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
- __LINE__);
- return -EIO;
- }
-
- IPW_DEBUG_INFO("EEPROM address: %08X\n", addr);
-
- /*
- * EEPROM version is the byte at offset 0xfd in firmware
- * We read 4 bytes, then shift out the byte we actually want */
- read_nic_dword(priv->net_dev, addr + 0xFC, &val);
- priv->eeprom_version = (val >> 24) & 0xFF;
- IPW_DEBUG_INFO("EEPROM version: %d\n", priv->eeprom_version);
-
- /*
- * HW RF Kill enable is bit 0 in byte at offset 0x21 in firmware
- *
- * notice that the EEPROM bit is reverse polarity, i.e.
- * bit = 0 signifies HW RF kill switch is supported
- * bit = 1 signifies HW RF kill switch is NOT supported
- */
- read_nic_dword(priv->net_dev, addr + 0x20, &val);
- if (!((val >> 24) & 0x01))
- priv->hw_features |= HW_FEATURE_RFKILL;
-
- IPW_DEBUG_INFO("HW RF Kill: %ssupported.\n",
- (priv->hw_features & HW_FEATURE_RFKILL) ? "" : "not ");
-
- return 0;
-}
-
-/*
- * Start firmware execution after power on and intialization
- * The sequence is:
- * 1. Release ARC
- * 2. Wait for f/w initialization completes;
- */
-static int ipw2100_start_adapter(struct ipw2100_priv *priv)
-{
- int i;
- u32 inta, inta_mask, gpio;
-
- IPW_DEBUG_INFO("enter\n");
-
- if (priv->status & STATUS_RUNNING)
- return 0;
-
- /*
- * Initialize the hw - drive adapter to DO state by setting
- * init_done bit. Wait for clk_ready bit and Download
- * fw & dino ucode
- */
- if (ipw2100_download_firmware(priv)) {
- printk(KERN_ERR DRV_NAME
- ": %s: Failed to power on the adapter.\n",
- priv->net_dev->name);
- return -EIO;
- }
-
- /* Clear the Tx, Rx and Msg queues and the r/w indexes
- * in the firmware RBD and TBD ring queue */
- ipw2100_queues_initialize(priv);
-
- ipw2100_hw_set_gpio(priv);
-
- /* TODO -- Look at disabling interrupts here to make sure none
- * get fired during FW initialization */
-
- /* Release ARC - clear reset bit */
- write_register(priv->net_dev, IPW_REG_RESET_REG, 0);
-
- /* wait for f/w intialization complete */
- IPW_DEBUG_FW("Waiting for f/w initialization to complete...\n");
- i = 5000;
- do {
- schedule_timeout_uninterruptible(msecs_to_jiffies(40));
- /* Todo... wait for sync command ... */
-
- read_register(priv->net_dev, IPW_REG_INTA, &inta);
-
- /* check "init done" bit */
- if (inta & IPW2100_INTA_FW_INIT_DONE) {
- /* reset "init done" bit */
- write_register(priv->net_dev, IPW_REG_INTA,
- IPW2100_INTA_FW_INIT_DONE);
- break;
- }
-
- /* check error conditions : we check these after the firmware
- * check so that if there is an error, the interrupt handler
- * will see it and the adapter will be reset */
- if (inta &
- (IPW2100_INTA_FATAL_ERROR | IPW2100_INTA_PARITY_ERROR)) {
- /* clear error conditions */
- write_register(priv->net_dev, IPW_REG_INTA,
- IPW2100_INTA_FATAL_ERROR |
- IPW2100_INTA_PARITY_ERROR);
- }
- } while (--i);
-
- /* Clear out any pending INTAs since we aren't supposed to have
- * interrupts enabled at this point... */
- read_register(priv->net_dev, IPW_REG_INTA, &inta);
- read_register(priv->net_dev, IPW_REG_INTA_MASK, &inta_mask);
- inta &= IPW_INTERRUPT_MASK;
- /* Clear out any pending interrupts */
- if (inta & inta_mask)
- write_register(priv->net_dev, IPW_REG_INTA, inta);
-
- IPW_DEBUG_FW("f/w initialization complete: %s\n",
- i ? "SUCCESS" : "FAILED");
-
- if (!i) {
- printk(KERN_WARNING DRV_NAME
- ": %s: Firmware did not initialize.\n",
- priv->net_dev->name);
- return -EIO;
- }
-
- /* allow firmware to write to GPIO1 & GPIO3 */
- read_register(priv->net_dev, IPW_REG_GPIO, &gpio);
-
- gpio |= (IPW_BIT_GPIO_GPIO1_MASK | IPW_BIT_GPIO_GPIO3_MASK);
-
- write_register(priv->net_dev, IPW_REG_GPIO, gpio);
-
- /* Ready to receive commands */
- priv->status |= STATUS_RUNNING;
-
- /* The adapter has been reset; we are not associated */
- priv->status &= ~(STATUS_ASSOCIATING | STATUS_ASSOCIATED);
-
- IPW_DEBUG_INFO("exit\n");
-
- return 0;
-}
-
-static inline void ipw2100_reset_fatalerror(struct ipw2100_priv *priv)
-{
- if (!priv->fatal_error)
- return;
-
- priv->fatal_errors[priv->fatal_index++] = priv->fatal_error;
- priv->fatal_index %= IPW2100_ERROR_QUEUE;
- priv->fatal_error = 0;
-}
-
-/* NOTE: Our interrupt is disabled when this method is called */
-static int ipw2100_power_cycle_adapter(struct ipw2100_priv *priv)
-{
- u32 reg;
- int i;
-
- IPW_DEBUG_INFO("Power cycling the hardware.\n");
-
- ipw2100_hw_set_gpio(priv);
-
- /* Step 1. Stop Master Assert */
- write_register(priv->net_dev, IPW_REG_RESET_REG,
- IPW_AUX_HOST_RESET_REG_STOP_MASTER);
-
- /* Step 2. Wait for stop Master Assert
- * (not more then 50us, otherwise ret error */
- i = 5;
- do {
- udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY);
- read_register(priv->net_dev, IPW_REG_RESET_REG, ®);
-
- if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED)
- break;
- } while (--i);
-
- priv->status &= ~STATUS_RESET_PENDING;
-
- if (!i) {
- IPW_DEBUG_INFO
- ("exit - waited too long for master assert stop\n");
- return -EIO;
- }
-
- write_register(priv->net_dev, IPW_REG_RESET_REG,
- IPW_AUX_HOST_RESET_REG_SW_RESET);
-
- /* Reset any fatal_error conditions */
- ipw2100_reset_fatalerror(priv);
-
- /* At this point, the adapter is now stopped and disabled */
- priv->status &= ~(STATUS_RUNNING | STATUS_ASSOCIATING |
- STATUS_ASSOCIATED | STATUS_ENABLED);
-
- return 0;
-}
-
-/*
- * Send the CARD_DISABLE_PHY_OFF comamnd to the card to disable it
- *
- * After disabling, if the card was associated, a STATUS_ASSN_LOST will be sent.
- *
- * STATUS_CARD_DISABLE_NOTIFICATION will be sent regardless of
- * if STATUS_ASSN_LOST is sent.
- */
-static int ipw2100_hw_phy_off(struct ipw2100_priv *priv)
-{
-
-#define HW_PHY_OFF_LOOP_DELAY (HZ / 5000)
-
- struct host_command cmd = {
- .host_command = CARD_DISABLE_PHY_OFF,
- .host_command_sequence = 0,
- .host_command_length = 0,
- };
- int err, i;
- u32 val1, val2;
-
- IPW_DEBUG_HC("CARD_DISABLE_PHY_OFF\n");
-
- /* Turn off the radio */
- err = ipw2100_hw_send_command(priv, &cmd);
- if (err)
- return err;
-
- for (i = 0; i < 2500; i++) {
- read_nic_dword(priv->net_dev, IPW2100_CONTROL_REG, &val1);
- read_nic_dword(priv->net_dev, IPW2100_COMMAND, &val2);
-
- if ((val1 & IPW2100_CONTROL_PHY_OFF) &&
- (val2 & IPW2100_COMMAND_PHY_OFF))
- return 0;
-
- schedule_timeout_uninterruptible(HW_PHY_OFF_LOOP_DELAY);
- }
-
- return -EIO;
-}
-
-static int ipw2100_enable_adapter(struct ipw2100_priv *priv)
-{
- struct host_command cmd = {
- .host_command = HOST_COMPLETE,
- .host_command_sequence = 0,
- .host_command_length = 0
- };
- int err = 0;
-
- IPW_DEBUG_HC("HOST_COMPLETE\n");
-
- if (priv->status & STATUS_ENABLED)
- return 0;
-
- mutex_lock(&priv->adapter_mutex);
-
- if (rf_kill_active(priv)) {
- IPW_DEBUG_HC("Command aborted due to RF kill active.\n");
- goto fail_up;
- }
-
- err = ipw2100_hw_send_command(priv, &cmd);
- if (err) {
- IPW_DEBUG_INFO("Failed to send HOST_COMPLETE command\n");
- goto fail_up;
- }
-
- err = ipw2100_wait_for_card_state(priv, IPW_HW_STATE_ENABLED);
- if (err) {
- IPW_DEBUG_INFO("%s: card not responding to init command.\n",
- priv->net_dev->name);
- goto fail_up;
- }
-
- if (priv->stop_hang_check) {
- priv->stop_hang_check = 0;
- queue_delayed_work(priv->workqueue, &priv->hang_check, HZ / 2);
- }
-
- fail_up:
- mutex_unlock(&priv->adapter_mutex);
- return err;
-}
-
-static int ipw2100_hw_stop_adapter(struct ipw2100_priv *priv)
-{
-#define HW_POWER_DOWN_DELAY (msecs_to_jiffies(100))
-
- struct host_command cmd = {
- .host_command = HOST_PRE_POWER_DOWN,
- .host_command_sequence = 0,
- .host_command_length = 0,
- };
- int err, i;
- u32 reg;
-
- if (!(priv->status & STATUS_RUNNING))
- return 0;
-
- priv->status |= STATUS_STOPPING;
-
- /* We can only shut down the card if the firmware is operational. So,
- * if we haven't reset since a fatal_error, then we can not send the
- * shutdown commands. */
- if (!priv->fatal_error) {
- /* First, make sure the adapter is enabled so that the PHY_OFF
- * command can shut it down */
- ipw2100_enable_adapter(priv);
-
- err = ipw2100_hw_phy_off(priv);
- if (err)
- printk(KERN_WARNING DRV_NAME
- ": Error disabling radio %d\n", err);
-
- /*
- * If in D0-standby mode going directly to D3 may cause a
- * PCI bus violation. Therefore we must change out of the D0
- * state.
- *
- * Sending the PREPARE_FOR_POWER_DOWN will restrict the
- * hardware from going into standby mode and will transition
- * out of D0-standby if it is already in that state.
- *
- * STATUS_PREPARE_POWER_DOWN_COMPLETE will be sent by the
- * driver upon completion. Once received, the driver can
- * proceed to the D3 state.
- *
- * Prepare for power down command to fw. This command would
- * take HW out of D0-standby and prepare it for D3 state.
- *
- * Currently FW does not support event notification for this
- * event. Therefore, skip waiting for it. Just wait a fixed
- * 100ms
- */
- IPW_DEBUG_HC("HOST_PRE_POWER_DOWN\n");
-
- err = ipw2100_hw_send_command(priv, &cmd);
- if (err)
- printk(KERN_WARNING DRV_NAME ": "
- "%s: Power down command failed: Error %d\n",
- priv->net_dev->name, err);
- else
- schedule_timeout_uninterruptible(HW_POWER_DOWN_DELAY);
- }
-
- priv->status &= ~STATUS_ENABLED;
-
- /*
- * Set GPIO 3 writable by FW; GPIO 1 writable
- * by driver and enable clock
- */
- ipw2100_hw_set_gpio(priv);
-
- /*
- * Power down adapter. Sequence:
- * 1. Stop master assert (RESET_REG[9]=1)
- * 2. Wait for stop master (RESET_REG[8]==1)
- * 3. S/w reset assert (RESET_REG[7] = 1)
- */
-
- /* Stop master assert */
- write_register(priv->net_dev, IPW_REG_RESET_REG,
- IPW_AUX_HOST_RESET_REG_STOP_MASTER);
-
- /* wait stop master not more than 50 usec.
- * Otherwise return error. */
- for (i = 5; i > 0; i--) {
- udelay(10);
-
- /* Check master stop bit */
- read_register(priv->net_dev, IPW_REG_RESET_REG, ®);
-
- if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED)
- break;
- }
-
- if (i == 0)
- printk(KERN_WARNING DRV_NAME
- ": %s: Could now power down adapter.\n",
- priv->net_dev->name);
-
- /* assert s/w reset */
- write_register(priv->net_dev, IPW_REG_RESET_REG,
- IPW_AUX_HOST_RESET_REG_SW_RESET);
-
- priv->status &= ~(STATUS_RUNNING | STATUS_STOPPING);
-
- return 0;
-}
-
-static int ipw2100_disable_adapter(struct ipw2100_priv *priv)
-{
- struct host_command cmd = {
- .host_command = CARD_DISABLE,
- .host_command_sequence = 0,
- .host_command_length = 0
- };
- int err = 0;
-
- IPW_DEBUG_HC("CARD_DISABLE\n");
-
- if (!(priv->status & STATUS_ENABLED))
- return 0;
-
- /* Make sure we clear the associated state */
- priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
-
- if (!priv->stop_hang_check) {
- priv->stop_hang_check = 1;
- cancel_delayed_work(&priv->hang_check);
- }
-
- mutex_lock(&priv->adapter_mutex);
-
- err = ipw2100_hw_send_command(priv, &cmd);
- if (err) {
- printk(KERN_WARNING DRV_NAME
- ": exit - failed to send CARD_DISABLE command\n");
- goto fail_up;
- }
-
- err = ipw2100_wait_for_card_state(priv, IPW_HW_STATE_DISABLED);
- if (err) {
- printk(KERN_WARNING DRV_NAME
- ": exit - card failed to change to DISABLED\n");
- goto fail_up;
- }
-
- IPW_DEBUG_INFO("TODO: implement scan state machine\n");
-
- fail_up:
- mutex_unlock(&priv->adapter_mutex);
- return err;
-}
-
-static int ipw2100_set_scan_options(struct ipw2100_priv *priv)
-{
- struct host_command cmd = {
- .host_command = SET_SCAN_OPTIONS,
- .host_command_sequence = 0,
- .host_command_length = 8
- };
- int err;
-
- IPW_DEBUG_INFO("enter\n");
-
- IPW_DEBUG_SCAN("setting scan options\n");
-
- cmd.host_command_parameters[0] = 0;
-
- if (!(priv->config & CFG_ASSOCIATE))
- cmd.host_command_parameters[0] |= IPW_SCAN_NOASSOCIATE;
- if ((priv->ieee->sec.flags & SEC_ENABLED) && priv->ieee->sec.enabled)
- cmd.host_command_parameters[0] |= IPW_SCAN_MIXED_CELL;
- if (priv->config & CFG_PASSIVE_SCAN)
- cmd.host_command_parameters[0] |= IPW_SCAN_PASSIVE;
-
- cmd.host_command_parameters[1] = priv->channel_mask;
-
- err = ipw2100_hw_send_command(priv, &cmd);
-
- IPW_DEBUG_HC("SET_SCAN_OPTIONS 0x%04X\n",
- cmd.host_command_parameters[0]);
-
- return err;
-}
-
-static int ipw2100_start_scan(struct ipw2100_priv *priv)
-{
- struct host_command cmd = {
- .host_command = BROADCAST_SCAN,
- .host_command_sequence = 0,
- .host_command_length = 4
- };
- int err;
-
- IPW_DEBUG_HC("START_SCAN\n");
-
- cmd.host_command_parameters[0] = 0;
-
- /* No scanning if in monitor mode */
- if (priv->ieee->iw_mode == IW_MODE_MONITOR)
- return 1;
-
- if (priv->status & STATUS_SCANNING) {
- IPW_DEBUG_SCAN("Scan requested while already in scan...\n");
- return 0;
- }
-
- IPW_DEBUG_INFO("enter\n");
-
- /* Not clearing here; doing so makes iwlist always return nothing...
- *
- * We should modify the table logic to use aging tables vs. clearing
- * the table on each scan start.
- */
- IPW_DEBUG_SCAN("starting scan\n");
-
- priv->status |= STATUS_SCANNING;
- err = ipw2100_hw_send_command(priv, &cmd);
- if (err)
- priv->status &= ~STATUS_SCANNING;
-
- IPW_DEBUG_INFO("exit\n");
-
- return err;
-}
-
-static const struct ieee80211_geo ipw_geos[] = {
- { /* Restricted */
- "---",
- .bg_channels = 14,
- .bg = {{2412, 1}, {2417, 2}, {2422, 3},
- {2427, 4}, {2432, 5}, {2437, 6},
- {2442, 7}, {2447, 8}, {2452, 9},
- {2457, 10}, {2462, 11}, {2467, 12},
- {2472, 13}, {2484, 14}},
- },
-};
-
-static int ipw2100_up(struct ipw2100_priv *priv, int deferred)
-{
- unsigned long flags;
- int rc = 0;
- u32 lock;
- u32 ord_len = sizeof(lock);
-
- /* Quite if manually disabled. */
- if (priv->status & STATUS_RF_KILL_SW) {
- IPW_DEBUG_INFO("%s: Radio is disabled by Manual Disable "
- "switch\n", priv->net_dev->name);
- return 0;
- }
-
- /* the ipw2100 hardware really doesn't want power management delays
- * longer than 175usec
- */
- pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY, "ipw2100", 175);
-
- /* If the interrupt is enabled, turn it off... */
- spin_lock_irqsave(&priv->low_lock, flags);
- ipw2100_disable_interrupts(priv);
-
- /* Reset any fatal_error conditions */
- ipw2100_reset_fatalerror(priv);
- spin_unlock_irqrestore(&priv->low_lock, flags);
-
- if (priv->status & STATUS_POWERED ||
- (priv->status & STATUS_RESET_PENDING)) {
- /* Power cycle the card ... */
- if (ipw2100_power_cycle_adapter(priv)) {
- printk(KERN_WARNING DRV_NAME
- ": %s: Could not cycle adapter.\n",
- priv->net_dev->name);
- rc = 1;
- goto exit;
- }
- } else
- priv->status |= STATUS_POWERED;
-
- /* Load the firmware, start the clocks, etc. */
- if (ipw2100_start_adapter(priv)) {
- printk(KERN_ERR DRV_NAME
- ": %s: Failed to start the firmware.\n",
- priv->net_dev->name);
- rc = 1;
- goto exit;
- }
-
- ipw2100_initialize_ordinals(priv);
-
- /* Determine capabilities of this particular HW configuration */
- if (ipw2100_get_hw_features(priv)) {
- printk(KERN_ERR DRV_NAME
- ": %s: Failed to determine HW features.\n",
- priv->net_dev->name);
- rc = 1;
- goto exit;
- }
-
- /* Initialize the geo */
- if (ieee80211_set_geo(priv->ieee, &ipw_geos[0])) {
- printk(KERN_WARNING DRV_NAME "Could not set geo\n");
- return 0;
- }
- priv->ieee->freq_band = IEEE80211_24GHZ_BAND;
-
- lock = LOCK_NONE;
- if (ipw2100_set_ordinal(priv, IPW_ORD_PERS_DB_LOCK, &lock, &ord_len)) {
- printk(KERN_ERR DRV_NAME
- ": %s: Failed to clear ordinal lock.\n",
- priv->net_dev->name);
- rc = 1;
- goto exit;
- }
-
- priv->status &= ~STATUS_SCANNING;
-
- if (rf_kill_active(priv)) {
- printk(KERN_INFO "%s: Radio is disabled by RF switch.\n",
- priv->net_dev->name);
-
- if (priv->stop_rf_kill) {
- priv->stop_rf_kill = 0;
- queue_delayed_work(priv->workqueue, &priv->rf_kill,
- round_jiffies_relative(HZ));
- }
-
- deferred = 1;
- }
-
- /* Turn on the interrupt so that commands can be processed */
- ipw2100_enable_interrupts(priv);
-
- /* Send all of the commands that must be sent prior to
- * HOST_COMPLETE */
- if (ipw2100_adapter_setup(priv)) {
- printk(KERN_ERR DRV_NAME ": %s: Failed to start the card.\n",
- priv->net_dev->name);
- rc = 1;
- goto exit;
- }
-
- if (!deferred) {
- /* Enable the adapter - sends HOST_COMPLETE */
- if (ipw2100_enable_adapter(priv)) {
- printk(KERN_ERR DRV_NAME ": "
- "%s: failed in call to enable adapter.\n",
- priv->net_dev->name);
- ipw2100_hw_stop_adapter(priv);
- rc = 1;
- goto exit;
- }
-
- /* Start a scan . . . */
- ipw2100_set_scan_options(priv);
- ipw2100_start_scan(priv);
- }
-
- exit:
- return rc;
-}
-
-/* Called by register_netdev() */
-static int ipw2100_net_init(struct net_device *dev)
-{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- return ipw2100_up(priv, 1);
-}
-
-static void ipw2100_down(struct ipw2100_priv *priv)
-{
- unsigned long flags;
- union iwreq_data wrqu = {
- .ap_addr = {
- .sa_family = ARPHRD_ETHER}
- };
- int associated = priv->status & STATUS_ASSOCIATED;
-
- /* Kill the RF switch timer */
- if (!priv->stop_rf_kill) {
- priv->stop_rf_kill = 1;
- cancel_delayed_work(&priv->rf_kill);
- }
-
- /* Kill the firmare hang check timer */
- if (!priv->stop_hang_check) {
- priv->stop_hang_check = 1;
- cancel_delayed_work(&priv->hang_check);
- }
-
- /* Kill any pending resets */
- if (priv->status & STATUS_RESET_PENDING)
- cancel_delayed_work(&priv->reset_work);
-
- /* Make sure the interrupt is on so that FW commands will be
- * processed correctly */
- spin_lock_irqsave(&priv->low_lock, flags);
- ipw2100_enable_interrupts(priv);
- spin_unlock_irqrestore(&priv->low_lock, flags);
-
- if (ipw2100_hw_stop_adapter(priv))
- printk(KERN_ERR DRV_NAME ": %s: Error stopping adapter.\n",
- priv->net_dev->name);
-
- /* Do not disable the interrupt until _after_ we disable
- * the adaptor. Otherwise the CARD_DISABLE command will never
- * be ack'd by the firmware */
- spin_lock_irqsave(&priv->low_lock, flags);
- ipw2100_disable_interrupts(priv);
- spin_unlock_irqrestore(&priv->low_lock, flags);
-
- pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY, "ipw2100",
- PM_QOS_DEFAULT_VALUE);
-
- /* We have to signal any supplicant if we are disassociating */
- if (associated)
- wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL);
-
- priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
- netif_carrier_off(priv->net_dev);
- netif_stop_queue(priv->net_dev);
-}
-
-static void ipw2100_reset_adapter(struct work_struct *work)
-{
- struct ipw2100_priv *priv =
- container_of(work, struct ipw2100_priv, reset_work.work);
- unsigned long flags;
- union iwreq_data wrqu = {
- .ap_addr = {
- .sa_family = ARPHRD_ETHER}
- };
- int associated = priv->status & STATUS_ASSOCIATED;
-
- spin_lock_irqsave(&priv->low_lock, flags);
- IPW_DEBUG_INFO(": %s: Restarting adapter.\n", priv->net_dev->name);
- priv->resets++;
- priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
- priv->status |= STATUS_SECURITY_UPDATED;
-
- /* Force a power cycle even if interface hasn't been opened
- * yet */
- cancel_delayed_work(&priv->reset_work);
- priv->status |= STATUS_RESET_PENDING;
- spin_unlock_irqrestore(&priv->low_lock, flags);
-
- mutex_lock(&priv->action_mutex);
- /* stop timed checks so that they don't interfere with reset */
- priv->stop_hang_check = 1;
- cancel_delayed_work(&priv->hang_check);
-
- /* We have to signal any supplicant if we are disassociating */
- if (associated)
- wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL);
-
- ipw2100_up(priv, 0);
- mutex_unlock(&priv->action_mutex);
-
-}
-
-static void isr_indicate_associated(struct ipw2100_priv *priv, u32 status)
-{
-
-#define MAC_ASSOCIATION_READ_DELAY (HZ)
- int ret, len, essid_len;
- char essid[IW_ESSID_MAX_SIZE];
- u32 txrate;
- u32 chan;
- char *txratename;
- u8 bssid[ETH_ALEN];
- DECLARE_SSID_BUF(ssid);
-
- /*
- * TBD: BSSID is usually 00:00:00:00:00:00 here and not
- * an actual MAC of the AP. Seems like FW sets this
- * address too late. Read it later and expose through
- * /proc or schedule a later task to query and update
- */
-
- essid_len = IW_ESSID_MAX_SIZE;
- ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_SSID,
- essid, &essid_len);
- if (ret) {
- IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
- __LINE__);
- return;
- }
-
- len = sizeof(u32);
- ret = ipw2100_get_ordinal(priv, IPW_ORD_CURRENT_TX_RATE, &txrate, &len);
- if (ret) {
- IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
- __LINE__);
- return;
- }
-
- len = sizeof(u32);
- ret = ipw2100_get_ordinal(priv, IPW_ORD_OUR_FREQ, &chan, &len);
- if (ret) {
- IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
- __LINE__);
- return;
- }
- len = ETH_ALEN;
- ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID, &bssid, &len);
- if (ret) {
- IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
- __LINE__);
- return;
- }
- memcpy(priv->ieee->bssid, bssid, ETH_ALEN);
-
- switch (txrate) {
- case TX_RATE_1_MBIT:
- txratename = "1Mbps";
- break;
- case TX_RATE_2_MBIT:
- txratename = "2Mbsp";
- break;
- case TX_RATE_5_5_MBIT:
- txratename = "5.5Mbps";
- break;
- case TX_RATE_11_MBIT:
- txratename = "11Mbps";
- break;
- default:
- IPW_DEBUG_INFO("Unknown rate: %d\n", txrate);
- txratename = "unknown rate";
- break;
- }
-
- IPW_DEBUG_INFO("%s: Associated with '%s' at %s, channel %d (BSSID=%pM)\n",
- priv->net_dev->name, print_ssid(ssid, essid, essid_len),
- txratename, chan, bssid);
-
- /* now we copy read ssid into dev */
- if (!(priv->config & CFG_STATIC_ESSID)) {
- priv->essid_len = min((u8) essid_len, (u8) IW_ESSID_MAX_SIZE);
- memcpy(priv->essid, essid, priv->essid_len);
- }
- priv->channel = chan;
- memcpy(priv->bssid, bssid, ETH_ALEN);
-
- priv->status |= STATUS_ASSOCIATING;
- priv->connect_start = get_seconds();
-
- queue_delayed_work(priv->workqueue, &priv->wx_event_work, HZ / 10);
-}
-
-static int ipw2100_set_essid(struct ipw2100_priv *priv, char *essid,
- int length, int batch_mode)
-{
- int ssid_len = min(length, IW_ESSID_MAX_SIZE);
- struct host_command cmd = {
- .host_command = SSID,
- .host_command_sequence = 0,
- .host_command_length = ssid_len
- };
- int err;
- DECLARE_SSID_BUF(ssid);
-
- IPW_DEBUG_HC("SSID: '%s'\n", print_ssid(ssid, essid, ssid_len));
-
- if (ssid_len)
- memcpy(cmd.host_command_parameters, essid, ssid_len);
-
- if (!batch_mode) {
- err = ipw2100_disable_adapter(priv);
- if (err)
- return err;
- }
-
- /* Bug in FW currently doesn't honor bit 0 in SET_SCAN_OPTIONS to
- * disable auto association -- so we cheat by setting a bogus SSID */
- if (!ssid_len && !(priv->config & CFG_ASSOCIATE)) {
- int i;
- u8 *bogus = (u8 *) cmd.host_command_parameters;
- for (i = 0; i < IW_ESSID_MAX_SIZE; i++)
- bogus[i] = 0x18 + i;
- cmd.host_command_length = IW_ESSID_MAX_SIZE;
- }
-
- /* NOTE: We always send the SSID command even if the provided ESSID is
- * the same as what we currently think is set. */
-
- err = ipw2100_hw_send_command(priv, &cmd);
- if (!err) {
- memset(priv->essid + ssid_len, 0, IW_ESSID_MAX_SIZE - ssid_len);
- memcpy(priv->essid, essid, ssid_len);
- priv->essid_len = ssid_len;
- }
-
- if (!batch_mode) {
- if (ipw2100_enable_adapter(priv))
- err = -EIO;
- }
-
- return err;
-}
-
-static void isr_indicate_association_lost(struct ipw2100_priv *priv, u32 status)
-{
- DECLARE_SSID_BUF(ssid);
-
- IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | IPW_DL_ASSOC,
- "disassociated: '%s' %pM \n",
- print_ssid(ssid, priv->essid, priv->essid_len),
- priv->bssid);
-
- priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
-
- if (priv->status & STATUS_STOPPING) {
- IPW_DEBUG_INFO("Card is stopping itself, discard ASSN_LOST.\n");
- return;
- }
-
- memset(priv->bssid, 0, ETH_ALEN);
- memset(priv->ieee->bssid, 0, ETH_ALEN);
-
- netif_carrier_off(priv->net_dev);
- netif_stop_queue(priv->net_dev);
-
- if (!(priv->status & STATUS_RUNNING))
- return;
-
- if (priv->status & STATUS_SECURITY_UPDATED)
- queue_delayed_work(priv->workqueue, &priv->security_work, 0);
-
- queue_delayed_work(priv->workqueue, &priv->wx_event_work, 0);
-}
-
-static void isr_indicate_rf_kill(struct ipw2100_priv *priv, u32 status)
-{
- IPW_DEBUG_INFO("%s: RF Kill state changed to radio OFF.\n",
- priv->net_dev->name);
-
- /* RF_KILL is now enabled (else we wouldn't be here) */
- priv->status |= STATUS_RF_KILL_HW;
-
- /* Make sure the RF Kill check timer is running */
- priv->stop_rf_kill = 0;
- cancel_delayed_work(&priv->rf_kill);
- queue_delayed_work(priv->workqueue, &priv->rf_kill,
- round_jiffies_relative(HZ));
-}
-
-static void send_scan_event(void *data)
-{
- struct ipw2100_priv *priv = data;
- union iwreq_data wrqu;
-
- wrqu.data.length = 0;
- wrqu.data.flags = 0;
- wireless_send_event(priv->net_dev, SIOCGIWSCAN, &wrqu, NULL);
-}
-
-static void ipw2100_scan_event_later(struct work_struct *work)
-{
- send_scan_event(container_of(work, struct ipw2100_priv,
- scan_event_later.work));
-}
-
-static void ipw2100_scan_event_now(struct work_struct *work)
-{
- send_scan_event(container_of(work, struct ipw2100_priv,
- scan_event_now));
-}
-
-static void isr_scan_complete(struct ipw2100_priv *priv, u32 status)
-{
- IPW_DEBUG_SCAN("scan complete\n");
- /* Age the scan results... */
- priv->ieee->scans++;
- priv->status &= ~STATUS_SCANNING;
-
- /* Only userspace-requested scan completion events go out immediately */
- if (!priv->user_requested_scan) {
- if (!delayed_work_pending(&priv->scan_event_later))
- queue_delayed_work(priv->workqueue,
- &priv->scan_event_later,
- round_jiffies_relative(msecs_to_jiffies(4000)));
- } else {
- priv->user_requested_scan = 0;
- cancel_delayed_work(&priv->scan_event_later);
- queue_work(priv->workqueue, &priv->scan_event_now);
- }
-}
-
-#ifdef CONFIG_IPW2100_DEBUG
-#define IPW2100_HANDLER(v, f) { v, f, # v }
-struct ipw2100_status_indicator {
- int status;
- void (*cb) (struct ipw2100_priv * priv, u32 status);
- char *name;
-};
-#else
-#define IPW2100_HANDLER(v, f) { v, f }
-struct ipw2100_status_indicator {
- int status;
- void (*cb) (struct ipw2100_priv * priv, u32 status);
-};
-#endif /* CONFIG_IPW2100_DEBUG */
-
-static void isr_indicate_scanning(struct ipw2100_priv *priv, u32 status)
-{
- IPW_DEBUG_SCAN("Scanning...\n");
- priv->status |= STATUS_SCANNING;
-}
-
-static const struct ipw2100_status_indicator status_handlers[] = {
- IPW2100_HANDLER(IPW_STATE_INITIALIZED, NULL),
- IPW2100_HANDLER(IPW_STATE_COUNTRY_FOUND, NULL),
- IPW2100_HANDLER(IPW_STATE_ASSOCIATED, isr_indicate_associated),
- IPW2100_HANDLER(IPW_STATE_ASSN_LOST, isr_indicate_association_lost),
- IPW2100_HANDLER(IPW_STATE_ASSN_CHANGED, NULL),
- IPW2100_HANDLER(IPW_STATE_SCAN_COMPLETE, isr_scan_complete),
- IPW2100_HANDLER(IPW_STATE_ENTERED_PSP, NULL),
- IPW2100_HANDLER(IPW_STATE_LEFT_PSP, NULL),
- IPW2100_HANDLER(IPW_STATE_RF_KILL, isr_indicate_rf_kill),
- IPW2100_HANDLER(IPW_STATE_DISABLED, NULL),
- IPW2100_HANDLER(IPW_STATE_POWER_DOWN, NULL),
- IPW2100_HANDLER(IPW_STATE_SCANNING, isr_indicate_scanning),
- IPW2100_HANDLER(-1, NULL)
-};
-
-static void isr_status_change(struct ipw2100_priv *priv, int status)
-{
- int i;
-
- if (status == IPW_STATE_SCANNING &&
- priv->status & STATUS_ASSOCIATED &&
- !(priv->status & STATUS_SCANNING)) {
- IPW_DEBUG_INFO("Scan detected while associated, with "
- "no scan request. Restarting firmware.\n");
-
- /* Wake up any sleeping jobs */
- schedule_reset(priv);
- }
-
- for (i = 0; status_handlers[i].status != -1; i++) {
- if (status == status_handlers[i].status) {
- IPW_DEBUG_NOTIF("Status change: %s\n",
- status_handlers[i].name);
- if (status_handlers[i].cb)
- status_handlers[i].cb(priv, status);
- priv->wstats.status = status;
- return;
- }
- }
-
- IPW_DEBUG_NOTIF("unknown status received: %04x\n", status);
-}
-
-static void isr_rx_complete_command(struct ipw2100_priv *priv,
- struct ipw2100_cmd_header *cmd)
-{
-#ifdef CONFIG_IPW2100_DEBUG
- if (cmd->host_command_reg < ARRAY_SIZE(command_types)) {
- IPW_DEBUG_HC("Command completed '%s (%d)'\n",
- command_types[cmd->host_command_reg],
- cmd->host_command_reg);
- }
-#endif
- if (cmd->host_command_reg == HOST_COMPLETE)
- priv->status |= STATUS_ENABLED;
-
- if (cmd->host_command_reg == CARD_DISABLE)
- priv->status &= ~STATUS_ENABLED;
-
- priv->status &= ~STATUS_CMD_ACTIVE;
-
- wake_up_interruptible(&priv->wait_command_queue);
-}
-
-#ifdef CONFIG_IPW2100_DEBUG
-static const char *frame_types[] = {
- "COMMAND_STATUS_VAL",
- "STATUS_CHANGE_VAL",
- "P80211_DATA_VAL",
- "P8023_DATA_VAL",
- "HOST_NOTIFICATION_VAL"
-};
-#endif
-
-static int ipw2100_alloc_skb(struct ipw2100_priv *priv,
- struct ipw2100_rx_packet *packet)
-{
- packet->skb = dev_alloc_skb(sizeof(struct ipw2100_rx));
- if (!packet->skb)
- return -ENOMEM;
-
- packet->rxp = (struct ipw2100_rx *)packet->skb->data;
- packet->dma_addr = pci_map_single(priv->pci_dev, packet->skb->data,
- sizeof(struct ipw2100_rx),
- PCI_DMA_FROMDEVICE);
- /* NOTE: pci_map_single does not return an error code, and 0 is a valid
- * dma_addr */
-
- return 0;
-}
-
-#define SEARCH_ERROR 0xffffffff
-#define SEARCH_FAIL 0xfffffffe
-#define SEARCH_SUCCESS 0xfffffff0
-#define SEARCH_DISCARD 0
-#define SEARCH_SNAPSHOT 1
-
-#define SNAPSHOT_ADDR(ofs) (priv->snapshot[((ofs) >> 12) & 0xff] + ((ofs) & 0xfff))
-static void ipw2100_snapshot_free(struct ipw2100_priv *priv)
-{
- int i;
- if (!priv->snapshot[0])
- return;
- for (i = 0; i < 0x30; i++)
- kfree(priv->snapshot[i]);
- priv->snapshot[0] = NULL;
-}
-
-#ifdef IPW2100_DEBUG_C3
-static int ipw2100_snapshot_alloc(struct ipw2100_priv *priv)
-{
- int i;
- if (priv->snapshot[0])
- return 1;
- for (i = 0; i < 0x30; i++) {
- priv->snapshot[i] = kmalloc(0x1000, GFP_ATOMIC);
- if (!priv->snapshot[i]) {
- IPW_DEBUG_INFO("%s: Error allocating snapshot "
- "buffer %d\n", priv->net_dev->name, i);
- while (i > 0)
- kfree(priv->snapshot[--i]);
- priv->snapshot[0] = NULL;
- return 0;
- }
- }
-
- return 1;
-}
-
-static u32 ipw2100_match_buf(struct ipw2100_priv *priv, u8 * in_buf,
- size_t len, int mode)
-{
- u32 i, j;
- u32 tmp;
- u8 *s, *d;
- u32 ret;
-
- s = in_buf;
- if (mode == SEARCH_SNAPSHOT) {
- if (!ipw2100_snapshot_alloc(priv))
- mode = SEARCH_DISCARD;
- }
-
- for (ret = SEARCH_FAIL, i = 0; i < 0x30000; i += 4) {
- read_nic_dword(priv->net_dev, i, &tmp);
- if (mode == SEARCH_SNAPSHOT)
- *(u32 *) SNAPSHOT_ADDR(i) = tmp;
- if (ret == SEARCH_FAIL) {
- d = (u8 *) & tmp;
- for (j = 0; j < 4; j++) {
- if (*s != *d) {
- s = in_buf;
- continue;
- }
-
- s++;
- d++;
-
- if ((s - in_buf) == len)
- ret = (i + j) - len + 1;
- }
- } else if (mode == SEARCH_DISCARD)
- return ret;
- }
-
- return ret;
-}
-#endif
-
-/*
- *
- * 0) Disconnect the SKB from the firmware (just unmap)
- * 1) Pack the ETH header into the SKB
- * 2) Pass the SKB to the network stack
- *
- * When packet is provided by the firmware, it contains the following:
- *
- * . ieee80211_hdr
- * . ieee80211_snap_hdr
- *
- * The size of the constructed ethernet
- *
- */
-#ifdef IPW2100_RX_DEBUG
-static u8 packet_data[IPW_RX_NIC_BUFFER_LENGTH];
-#endif
-
-static void ipw2100_corruption_detected(struct ipw2100_priv *priv, int i)
-{
-#ifdef IPW2100_DEBUG_C3
- struct ipw2100_status *status = &priv->status_queue.drv[i];
- u32 match, reg;
- int j;
-#endif
-
- IPW_DEBUG_INFO(": PCI latency error detected at 0x%04zX.\n",
- i * sizeof(struct ipw2100_status));
-
-#ifdef IPW2100_DEBUG_C3
- /* Halt the fimrware so we can get a good image */
- write_register(priv->net_dev, IPW_REG_RESET_REG,
- IPW_AUX_HOST_RESET_REG_STOP_MASTER);
- j = 5;
- do {
- udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY);
- read_register(priv->net_dev, IPW_REG_RESET_REG, ®);
-
- if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED)
- break;
- } while (j--);
-
- match = ipw2100_match_buf(priv, (u8 *) status,
- sizeof(struct ipw2100_status),
- SEARCH_SNAPSHOT);
- if (match < SEARCH_SUCCESS)
- IPW_DEBUG_INFO("%s: DMA status match in Firmware at "
- "offset 0x%06X, length %d:\n",
- priv->net_dev->name, match,
- sizeof(struct ipw2100_status));
- else
- IPW_DEBUG_INFO("%s: No DMA status match in "
- "Firmware.\n", priv->net_dev->name);
-
- printk_buf((u8 *) priv->status_queue.drv,
- sizeof(struct ipw2100_status) * RX_QUEUE_LENGTH);
-#endif
-
- priv->fatal_error = IPW2100_ERR_C3_CORRUPTION;
- priv->ieee->stats.rx_errors++;
- schedule_reset(priv);
-}
-
-static void isr_rx(struct ipw2100_priv *priv, int i,
- struct ieee80211_rx_stats *stats)
-{
- struct ipw2100_status *status = &priv->status_queue.drv[i];
- struct ipw2100_rx_packet *packet = &priv->rx_buffers[i];
-
- IPW_DEBUG_RX("Handler...\n");
-
- if (unlikely(status->frame_size > skb_tailroom(packet->skb))) {
- IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!"
- " Dropping.\n",
- priv->net_dev->name,
- status->frame_size, skb_tailroom(packet->skb));
- priv->ieee->stats.rx_errors++;
- return;
- }
-
- if (unlikely(!netif_running(priv->net_dev))) {
- priv->ieee->stats.rx_errors++;
- priv->wstats.discard.misc++;
- IPW_DEBUG_DROP("Dropping packet while interface is not up.\n");
- return;
- }
-
- if (unlikely(priv->ieee->iw_mode != IW_MODE_MONITOR &&
- !(priv->status & STATUS_ASSOCIATED))) {
- IPW_DEBUG_DROP("Dropping packet while not associated.\n");
- priv->wstats.discard.misc++;
- return;
- }
-
- pci_unmap_single(priv->pci_dev,
- packet->dma_addr,
- sizeof(struct ipw2100_rx), PCI_DMA_FROMDEVICE);
-
- skb_put(packet->skb, status->frame_size);
-
-#ifdef IPW2100_RX_DEBUG
- /* Make a copy of the frame so we can dump it to the logs if
- * ieee80211_rx fails */
- skb_copy_from_linear_data(packet->skb, packet_data,
- min_t(u32, status->frame_size,
- IPW_RX_NIC_BUFFER_LENGTH));
-#endif
-
- if (!ieee80211_rx(priv->ieee, packet->skb, stats)) {
-#ifdef IPW2100_RX_DEBUG
- IPW_DEBUG_DROP("%s: Non consumed packet:\n",
- priv->net_dev->name);
- printk_buf(IPW_DL_DROP, packet_data, status->frame_size);
-#endif
- priv->ieee->stats.rx_errors++;
-
- /* ieee80211_rx failed, so it didn't free the SKB */
- dev_kfree_skb_any(packet->skb);
- packet->skb = NULL;
- }
-
- /* We need to allocate a new SKB and attach it to the RDB. */
- if (unlikely(ipw2100_alloc_skb(priv, packet))) {
- printk(KERN_WARNING DRV_NAME ": "
- "%s: Unable to allocate SKB onto RBD ring - disabling "
- "adapter.\n", priv->net_dev->name);
- /* TODO: schedule adapter shutdown */
- IPW_DEBUG_INFO("TODO: Shutdown adapter...\n");
- }
-
- /* Update the RDB entry */
- priv->rx_queue.drv[i].host_addr = packet->dma_addr;
-}
-
-#ifdef CONFIG_IPW2100_MONITOR
-
-static void isr_rx_monitor(struct ipw2100_priv *priv, int i,
- struct ieee80211_rx_stats *stats)
-{
- struct ipw2100_status *status = &priv->status_queue.drv[i];
- struct ipw2100_rx_packet *packet = &priv->rx_buffers[i];
-
- /* Magic struct that slots into the radiotap header -- no reason
- * to build this manually element by element, we can write it much
- * more efficiently than we can parse it. ORDER MATTERS HERE */
- struct ipw_rt_hdr {
- struct ieee80211_radiotap_header rt_hdr;
- s8 rt_dbmsignal; /* signal in dbM, kluged to signed */
- } *ipw_rt;
-
- IPW_DEBUG_RX("Handler...\n");
-
- if (unlikely(status->frame_size > skb_tailroom(packet->skb) -
- sizeof(struct ipw_rt_hdr))) {
- IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!"
- " Dropping.\n",
- priv->net_dev->name,
- status->frame_size,
- skb_tailroom(packet->skb));
- priv->ieee->stats.rx_errors++;
- return;
- }
-
- if (unlikely(!netif_running(priv->net_dev))) {
- priv->ieee->stats.rx_errors++;
- priv->wstats.discard.misc++;
- IPW_DEBUG_DROP("Dropping packet while interface is not up.\n");
- return;
- }
-
- if (unlikely(priv->config & CFG_CRC_CHECK &&
- status->flags & IPW_STATUS_FLAG_CRC_ERROR)) {
- IPW_DEBUG_RX("CRC error in packet. Dropping.\n");
- priv->ieee->stats.rx_errors++;
- return;
- }
-
- pci_unmap_single(priv->pci_dev, packet->dma_addr,
- sizeof(struct ipw2100_rx), PCI_DMA_FROMDEVICE);
- memmove(packet->skb->data + sizeof(struct ipw_rt_hdr),
- packet->skb->data, status->frame_size);
-
- ipw_rt = (struct ipw_rt_hdr *) packet->skb->data;
-
- ipw_rt->rt_hdr.it_version = PKTHDR_RADIOTAP_VERSION;
- ipw_rt->rt_hdr.it_pad = 0; /* always good to zero */
- ipw_rt->rt_hdr.it_len = cpu_to_le16(sizeof(struct ipw_rt_hdr)); /* total hdr+data */
-
- ipw_rt->rt_hdr.it_present = cpu_to_le32(1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL);
-
- ipw_rt->rt_dbmsignal = status->rssi + IPW2100_RSSI_TO_DBM;
-
- skb_put(packet->skb, status->frame_size + sizeof(struct ipw_rt_hdr));
-
- if (!ieee80211_rx(priv->ieee, packet->skb, stats)) {
- priv->ieee->stats.rx_errors++;
-
- /* ieee80211_rx failed, so it didn't free the SKB */
- dev_kfree_skb_any(packet->skb);
- packet->skb = NULL;
- }
-
- /* We need to allocate a new SKB and attach it to the RDB. */
- if (unlikely(ipw2100_alloc_skb(priv, packet))) {
- IPW_DEBUG_WARNING(
- "%s: Unable to allocate SKB onto RBD ring - disabling "
- "adapter.\n", priv->net_dev->name);
- /* TODO: schedule adapter shutdown */
- IPW_DEBUG_INFO("TODO: Shutdown adapter...\n");
- }
-
- /* Update the RDB entry */
- priv->rx_queue.drv[i].host_addr = packet->dma_addr;
-}
-
-#endif
-
-static int ipw2100_corruption_check(struct ipw2100_priv *priv, int i)
-{
- struct ipw2100_status *status = &priv->status_queue.drv[i];
- struct ipw2100_rx *u = priv->rx_buffers[i].rxp;
- u16 frame_type = status->status_fields & STATUS_TYPE_MASK;
-
- switch (frame_type) {
- case COMMAND_STATUS_VAL:
- return (status->frame_size != sizeof(u->rx_data.command));
- case STATUS_CHANGE_VAL:
- return (status->frame_size != sizeof(u->rx_data.status));
- case HOST_NOTIFICATION_VAL:
- return (status->frame_size < sizeof(u->rx_data.notification));
- case P80211_DATA_VAL:
- case P8023_DATA_VAL:
-#ifdef CONFIG_IPW2100_MONITOR
- return 0;
-#else
- switch (WLAN_FC_GET_TYPE(le16_to_cpu(u->rx_data.header.frame_ctl))) {
- case IEEE80211_FTYPE_MGMT:
- case IEEE80211_FTYPE_CTL:
- return 0;
- case IEEE80211_FTYPE_DATA:
- return (status->frame_size >
- IPW_MAX_802_11_PAYLOAD_LENGTH);
- }
-#endif
- }
-
- return 1;
-}
-
-/*
- * ipw2100 interrupts are disabled at this point, and the ISR
- * is the only code that calls this method. So, we do not need
- * to play with any locks.
- *
- * RX Queue works as follows:
- *
- * Read index - firmware places packet in entry identified by the
- * Read index and advances Read index. In this manner,
- * Read index will always point to the next packet to
- * be filled--but not yet valid.
- *
- * Write index - driver fills this entry with an unused RBD entry.
- * This entry has not filled by the firmware yet.
- *
- * In between the W and R indexes are the RBDs that have been received
- * but not yet processed.
- *
- * The process of handling packets will start at WRITE + 1 and advance
- * until it reaches the READ index.
- *
- * The WRITE index is cached in the variable 'priv->rx_queue.next'.
- *
- */
-static void __ipw2100_rx_process(struct ipw2100_priv *priv)
-{
- struct ipw2100_bd_queue *rxq = &priv->rx_queue;
- struct ipw2100_status_queue *sq = &priv->status_queue;
- struct ipw2100_rx_packet *packet;
- u16 frame_type;
- u32 r, w, i, s;
- struct ipw2100_rx *u;
- struct ieee80211_rx_stats stats = {
- .mac_time = jiffies,
- };
-
- read_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_READ_INDEX, &r);
- read_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_WRITE_INDEX, &w);
-
- if (r >= rxq->entries) {
- IPW_DEBUG_RX("exit - bad read index\n");
- return;
- }
-
- i = (rxq->next + 1) % rxq->entries;
- s = i;
- while (i != r) {
- /* IPW_DEBUG_RX("r = %d : w = %d : processing = %d\n",
- r, rxq->next, i); */
-
- packet = &priv->rx_buffers[i];
-
- /* Sync the DMA for the STATUS buffer so CPU is sure to get
- * the correct values */
- pci_dma_sync_single_for_cpu(priv->pci_dev,
- sq->nic +
- sizeof(struct ipw2100_status) * i,
- sizeof(struct ipw2100_status),
- PCI_DMA_FROMDEVICE);
-
- /* Sync the DMA for the RX buffer so CPU is sure to get
- * the correct values */
- pci_dma_sync_single_for_cpu(priv->pci_dev, packet->dma_addr,
- sizeof(struct ipw2100_rx),
- PCI_DMA_FROMDEVICE);
-
- if (unlikely(ipw2100_corruption_check(priv, i))) {
- ipw2100_corruption_detected(priv, i);
- goto increment;
- }
-
- u = packet->rxp;
- frame_type = sq->drv[i].status_fields & STATUS_TYPE_MASK;
- stats.rssi = sq->drv[i].rssi + IPW2100_RSSI_TO_DBM;
- stats.len = sq->drv[i].frame_size;
-
- stats.mask = 0;
- if (stats.rssi != 0)
- stats.mask |= IEEE80211_STATMASK_RSSI;
- stats.freq = IEEE80211_24GHZ_BAND;
-
- IPW_DEBUG_RX("%s: '%s' frame type received (%d).\n",
- priv->net_dev->name, frame_types[frame_type],
- stats.len);
-
- switch (frame_type) {
- case COMMAND_STATUS_VAL:
- /* Reset Rx watchdog */
- isr_rx_complete_command(priv, &u->rx_data.command);
- break;
-
- case STATUS_CHANGE_VAL:
- isr_status_change(priv, u->rx_data.status);
- break;
-
- case P80211_DATA_VAL:
- case P8023_DATA_VAL:
-#ifdef CONFIG_IPW2100_MONITOR
- if (priv->ieee->iw_mode == IW_MODE_MONITOR) {
- isr_rx_monitor(priv, i, &stats);
- break;
- }
-#endif
- if (stats.len < sizeof(struct ieee80211_hdr_3addr))
- break;
- switch (WLAN_FC_GET_TYPE(le16_to_cpu(u->rx_data.header.frame_ctl))) {
- case IEEE80211_FTYPE_MGMT:
- ieee80211_rx_mgt(priv->ieee,
- &u->rx_data.header, &stats);
- break;
-
- case IEEE80211_FTYPE_CTL:
- break;
-
- case IEEE80211_FTYPE_DATA:
- isr_rx(priv, i, &stats);
- break;
-
- }
- break;
- }
-
- increment:
- /* clear status field associated with this RBD */
- rxq->drv[i].status.info.field = 0;
-
- i = (i + 1) % rxq->entries;
- }
-
- if (i != s) {
- /* backtrack one entry, wrapping to end if at 0 */
- rxq->next = (i ? i : rxq->entries) - 1;
-
- write_register(priv->net_dev,
- IPW_MEM_HOST_SHARED_RX_WRITE_INDEX, rxq->next);
- }
-}
-
-/*
- * __ipw2100_tx_process
- *
- * This routine will determine whether the next packet on
- * the fw_pend_list has been processed by the firmware yet.
- *
- * If not, then it does nothing and returns.
- *
- * If so, then it removes the item from the fw_pend_list, frees
- * any associated storage, and places the item back on the
- * free list of its source (either msg_free_list or tx_free_list)
- *
- * TX Queue works as follows:
- *
- * Read index - points to the next TBD that the firmware will
- * process. The firmware will read the data, and once
- * done processing, it will advance the Read index.
- *
- * Write index - driver fills this entry with an constructed TBD
- * entry. The Write index is not advanced until the
- * packet has been configured.
- *
- * In between the W and R indexes are the TBDs that have NOT been
- * processed. Lagging behind the R index are packets that have
- * been processed but have not been freed by the driver.
- *
- * In order to free old storage, an internal index will be maintained
- * that points to the next packet to be freed. When all used
- * packets have been freed, the oldest index will be the same as the
- * firmware's read index.
- *
- * The OLDEST index is cached in the variable 'priv->tx_queue.oldest'
- *
- * Because the TBD structure can not contain arbitrary data, the
- * driver must keep an internal queue of cached allocations such that
- * it can put that data back into the tx_free_list and msg_free_list
- * for use by future command and data packets.
- *
- */
-static int __ipw2100_tx_process(struct ipw2100_priv *priv)
-{
- struct ipw2100_bd_queue *txq = &priv->tx_queue;
- struct ipw2100_bd *tbd;
- struct list_head *element;
- struct ipw2100_tx_packet *packet;
- int descriptors_used;
- int e, i;
- u32 r, w, frag_num = 0;
-
- if (list_empty(&priv->fw_pend_list))
- return 0;
-
- element = priv->fw_pend_list.next;
-
- packet = list_entry(element, struct ipw2100_tx_packet, list);
- tbd = &txq->drv[packet->index];
-
- /* Determine how many TBD entries must be finished... */
- switch (packet->type) {
- case COMMAND:
- /* COMMAND uses only one slot; don't advance */
- descriptors_used = 1;
- e = txq->oldest;
- break;
-
- case DATA:
- /* DATA uses two slots; advance and loop position. */
- descriptors_used = tbd->num_fragments;
- frag_num = tbd->num_fragments - 1;
- e = txq->oldest + frag_num;
- e %= txq->entries;
- break;
-
- default:
- printk(KERN_WARNING DRV_NAME ": %s: Bad fw_pend_list entry!\n",
- priv->net_dev->name);
- return 0;
- }
-
- /* if the last TBD is not done by NIC yet, then packet is
- * not ready to be released.
- *
- */
- read_register(priv->net_dev, IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX,
- &r);
- read_register(priv->net_dev, IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX,
- &w);
- if (w != txq->next)
- printk(KERN_WARNING DRV_NAME ": %s: write index mismatch\n",
- priv->net_dev->name);
-
- /*
- * txq->next is the index of the last packet written txq->oldest is
- * the index of the r is the index of the next packet to be read by
- * firmware
- */
-
- /*
- * Quick graphic to help you visualize the following
- * if / else statement
- *
- * ===>| s---->|===============
- * e>|
- * | a | b | c | d | e | f | g | h | i | j | k | l
- * r---->|
- * w
- *
- * w - updated by driver
- * r - updated by firmware
- * s - start of oldest BD entry (txq->oldest)
- * e - end of oldest BD entry
- *
- */
- if (!((r <= w && (e < r || e >= w)) || (e < r && e >= w))) {
- IPW_DEBUG_TX("exit - no processed packets ready to release.\n");
- return 0;
- }
-
- list_del(element);
- DEC_STAT(&priv->fw_pend_stat);
-
-#ifdef CONFIG_IPW2100_DEBUG
- {
- int i = txq->oldest;
- IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n", i,
- &txq->drv[i],
- (u32) (txq->nic + i * sizeof(struct ipw2100_bd)),
- txq->drv[i].host_addr, txq->drv[i].buf_length);
-
- if (packet->type == DATA) {
- i = (i + 1) % txq->entries;
-
- IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n", i,
- &txq->drv[i],
- (u32) (txq->nic + i *
- sizeof(struct ipw2100_bd)),
- (u32) txq->drv[i].host_addr,
- txq->drv[i].buf_length);
- }
- }
-#endif
-
- switch (packet->type) {
- case DATA:
- if (txq->drv[txq->oldest].status.info.fields.txType != 0)
- printk(KERN_WARNING DRV_NAME ": %s: Queue mismatch. "
- "Expecting DATA TBD but pulled "
- "something else: ids %d=%d.\n",
- priv->net_dev->name, txq->oldest, packet->index);
-
- /* DATA packet; we have to unmap and free the SKB */
- for (i = 0; i < frag_num; i++) {
- tbd = &txq->drv[(packet->index + 1 + i) % txq->entries];
-
- IPW_DEBUG_TX("TX%d P=%08x L=%d\n",
- (packet->index + 1 + i) % txq->entries,
- tbd->host_addr, tbd->buf_length);
-
- pci_unmap_single(priv->pci_dev,
- tbd->host_addr,
- tbd->buf_length, PCI_DMA_TODEVICE);
- }
-
- ieee80211_txb_free(packet->info.d_struct.txb);
- packet->info.d_struct.txb = NULL;
-
- list_add_tail(element, &priv->tx_free_list);
- INC_STAT(&priv->tx_free_stat);
-
- /* We have a free slot in the Tx queue, so wake up the
- * transmit layer if it is stopped. */
- if (priv->status & STATUS_ASSOCIATED)
- netif_wake_queue(priv->net_dev);
-
- /* A packet was processed by the hardware, so update the
- * watchdog */
- priv->net_dev->trans_start = jiffies;
-
- break;
-
- case COMMAND:
- if (txq->drv[txq->oldest].status.info.fields.txType != 1)
- printk(KERN_WARNING DRV_NAME ": %s: Queue mismatch. "
- "Expecting COMMAND TBD but pulled "
- "something else: ids %d=%d.\n",
- priv->net_dev->name, txq->oldest, packet->index);
-
-#ifdef CONFIG_IPW2100_DEBUG
- if (packet->info.c_struct.cmd->host_command_reg <
- ARRAY_SIZE(command_types))
- IPW_DEBUG_TX("Command '%s (%d)' processed: %d.\n",
- command_types[packet->info.c_struct.cmd->
- host_command_reg],
- packet->info.c_struct.cmd->
- host_command_reg,
- packet->info.c_struct.cmd->cmd_status_reg);
-#endif
-
- list_add_tail(element, &priv->msg_free_list);
- INC_STAT(&priv->msg_free_stat);
- break;
- }
-
- /* advance oldest used TBD pointer to start of next entry */
- txq->oldest = (e + 1) % txq->entries;
- /* increase available TBDs number */
- txq->available += descriptors_used;
- SET_STAT(&priv->txq_stat, txq->available);
-
- IPW_DEBUG_TX("packet latency (send to process) %ld jiffies\n",
- jiffies - packet->jiffy_start);
-
- return (!list_empty(&priv->fw_pend_list));
-}
-
-static inline void __ipw2100_tx_complete(struct ipw2100_priv *priv)
-{
- int i = 0;
-
- while (__ipw2100_tx_process(priv) && i < 200)
- i++;
-
- if (i == 200) {
- printk(KERN_WARNING DRV_NAME ": "
- "%s: Driver is running slow (%d iters).\n",
- priv->net_dev->name, i);
- }
-}
-
-static void ipw2100_tx_send_commands(struct ipw2100_priv *priv)
-{
- struct list_head *element;
- struct ipw2100_tx_packet *packet;
- struct ipw2100_bd_queue *txq = &priv->tx_queue;
- struct ipw2100_bd *tbd;
- int next = txq->next;
-
- while (!list_empty(&priv->msg_pend_list)) {
- /* if there isn't enough space in TBD queue, then
- * don't stuff a new one in.
- * NOTE: 3 are needed as a command will take one,
- * and there is a minimum of 2 that must be
- * maintained between the r and w indexes
- */
- if (txq->available <= 3) {
- IPW_DEBUG_TX("no room in tx_queue\n");
- break;
- }
-
- element = priv->msg_pend_list.next;
- list_del(element);
- DEC_STAT(&priv->msg_pend_stat);
-
- packet = list_entry(element, struct ipw2100_tx_packet, list);
-
- IPW_DEBUG_TX("using TBD at virt=%p, phys=%p\n",
- &txq->drv[txq->next],
- (void *)(txq->nic + txq->next *
- sizeof(struct ipw2100_bd)));
-
- packet->index = txq->next;
-
- tbd = &txq->drv[txq->next];
-
- /* initialize TBD */
- tbd->host_addr = packet->info.c_struct.cmd_phys;
- tbd->buf_length = sizeof(struct ipw2100_cmd_header);
- /* not marking number of fragments causes problems
- * with f/w debug version */
- tbd->num_fragments = 1;
- tbd->status.info.field =
- IPW_BD_STATUS_TX_FRAME_COMMAND |
- IPW_BD_STATUS_TX_INTERRUPT_ENABLE;
-
- /* update TBD queue counters */
- txq->next++;
- txq->next %= txq->entries;
- txq->available--;
- DEC_STAT(&priv->txq_stat);
-
- list_add_tail(element, &priv->fw_pend_list);
- INC_STAT(&priv->fw_pend_stat);
- }
-
- if (txq->next != next) {
- /* kick off the DMA by notifying firmware the
- * write index has moved; make sure TBD stores are sync'd */
- wmb();
- write_register(priv->net_dev,
- IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX,
- txq->next);
- }
-}
-
-/*
- * ipw2100_tx_send_data
- *
- */
-static void ipw2100_tx_send_data(struct ipw2100_priv *priv)
-{
- struct list_head *element;
- struct ipw2100_tx_packet *packet;
- struct ipw2100_bd_queue *txq = &priv->tx_queue;
- struct ipw2100_bd *tbd;
- int next = txq->next;
- int i = 0;
- struct ipw2100_data_header *ipw_hdr;
- struct ieee80211_hdr_3addr *hdr;
-
- while (!list_empty(&priv->tx_pend_list)) {
- /* if there isn't enough space in TBD queue, then
- * don't stuff a new one in.
- * NOTE: 4 are needed as a data will take two,
- * and there is a minimum of 2 that must be
- * maintained between the r and w indexes
- */
- element = priv->tx_pend_list.next;
- packet = list_entry(element, struct ipw2100_tx_packet, list);
-
- if (unlikely(1 + packet->info.d_struct.txb->nr_frags >
- IPW_MAX_BDS)) {
- /* TODO: Support merging buffers if more than
- * IPW_MAX_BDS are used */
- IPW_DEBUG_INFO("%s: Maximum BD theshold exceeded. "
- "Increase fragmentation level.\n",
- priv->net_dev->name);
- }
-
- if (txq->available <= 3 + packet->info.d_struct.txb->nr_frags) {
- IPW_DEBUG_TX("no room in tx_queue\n");
- break;
- }
-
- list_del(element);
- DEC_STAT(&priv->tx_pend_stat);
-
- tbd = &txq->drv[txq->next];
-
- packet->index = txq->next;
-
- ipw_hdr = packet->info.d_struct.data;
- hdr = (struct ieee80211_hdr_3addr *)packet->info.d_struct.txb->
- fragments[0]->data;
-
- if (priv->ieee->iw_mode == IW_MODE_INFRA) {
- /* To DS: Addr1 = BSSID, Addr2 = SA,
- Addr3 = DA */
- memcpy(ipw_hdr->src_addr, hdr->addr2, ETH_ALEN);
- memcpy(ipw_hdr->dst_addr, hdr->addr3, ETH_ALEN);
- } else if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
- /* not From/To DS: Addr1 = DA, Addr2 = SA,
- Addr3 = BSSID */
- memcpy(ipw_hdr->src_addr, hdr->addr2, ETH_ALEN);
- memcpy(ipw_hdr->dst_addr, hdr->addr1, ETH_ALEN);
- }
-
- ipw_hdr->host_command_reg = SEND;
- ipw_hdr->host_command_reg1 = 0;
-
- /* For now we only support host based encryption */
- ipw_hdr->needs_encryption = 0;
- ipw_hdr->encrypted = packet->info.d_struct.txb->encrypted;
- if (packet->info.d_struct.txb->nr_frags > 1)
- ipw_hdr->fragment_size =
- packet->info.d_struct.txb->frag_size -
- IEEE80211_3ADDR_LEN;
- else
- ipw_hdr->fragment_size = 0;
-
- tbd->host_addr = packet->info.d_struct.data_phys;
- tbd->buf_length = sizeof(struct ipw2100_data_header);
- tbd->num_fragments = 1 + packet->info.d_struct.txb->nr_frags;
- tbd->status.info.field =
- IPW_BD_STATUS_TX_FRAME_802_3 |
- IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT;
- txq->next++;
- txq->next %= txq->entries;
-
- IPW_DEBUG_TX("data header tbd TX%d P=%08x L=%d\n",
- packet->index, tbd->host_addr, tbd->buf_length);
-#ifdef CONFIG_IPW2100_DEBUG
- if (packet->info.d_struct.txb->nr_frags > 1)
- IPW_DEBUG_FRAG("fragment Tx: %d frames\n",
- packet->info.d_struct.txb->nr_frags);
-#endif
-
- for (i = 0; i < packet->info.d_struct.txb->nr_frags; i++) {
- tbd = &txq->drv[txq->next];
- if (i == packet->info.d_struct.txb->nr_frags - 1)
- tbd->status.info.field =
- IPW_BD_STATUS_TX_FRAME_802_3 |
- IPW_BD_STATUS_TX_INTERRUPT_ENABLE;
- else
- tbd->status.info.field =
- IPW_BD_STATUS_TX_FRAME_802_3 |
- IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT;
-
- tbd->buf_length = packet->info.d_struct.txb->
- fragments[i]->len - IEEE80211_3ADDR_LEN;
-
- tbd->host_addr = pci_map_single(priv->pci_dev,
- packet->info.d_struct.
- txb->fragments[i]->
- data +
- IEEE80211_3ADDR_LEN,
- tbd->buf_length,
- PCI_DMA_TODEVICE);
-
- IPW_DEBUG_TX("data frag tbd TX%d P=%08x L=%d\n",
- txq->next, tbd->host_addr,
- tbd->buf_length);
-
- pci_dma_sync_single_for_device(priv->pci_dev,
- tbd->host_addr,
- tbd->buf_length,
- PCI_DMA_TODEVICE);
-
- txq->next++;
- txq->next %= txq->entries;
- }
-
- txq->available -= 1 + packet->info.d_struct.txb->nr_frags;
- SET_STAT(&priv->txq_stat, txq->available);
-
- list_add_tail(element, &priv->fw_pend_list);
- INC_STAT(&priv->fw_pend_stat);
- }
-
- if (txq->next != next) {
- /* kick off the DMA by notifying firmware the
- * write index has moved; make sure TBD stores are sync'd */
- write_register(priv->net_dev,
- IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX,
- txq->next);
- }
- return;
-}
-
-static void ipw2100_irq_tasklet(struct ipw2100_priv *priv)
-{
- struct net_device *dev = priv->net_dev;
- unsigned long flags;
- u32 inta, tmp;
-
- spin_lock_irqsave(&priv->low_lock, flags);
- ipw2100_disable_interrupts(priv);
-
- read_register(dev, IPW_REG_INTA, &inta);
-
- IPW_DEBUG_ISR("enter - INTA: 0x%08lX\n",
- (unsigned long)inta & IPW_INTERRUPT_MASK);
-
- priv->in_isr++;
- priv->interrupts++;
-
- /* We do not loop and keep polling for more interrupts as this
- * is frowned upon and doesn't play nicely with other potentially
- * chained IRQs */
- IPW_DEBUG_ISR("INTA: 0x%08lX\n",
- (unsigned long)inta & IPW_INTERRUPT_MASK);
-
- if (inta & IPW2100_INTA_FATAL_ERROR) {
- printk(KERN_WARNING DRV_NAME
- ": Fatal interrupt. Scheduling firmware restart.\n");
- priv->inta_other++;
- write_register(dev, IPW_REG_INTA, IPW2100_INTA_FATAL_ERROR);
-
- read_nic_dword(dev, IPW_NIC_FATAL_ERROR, &priv->fatal_error);
- IPW_DEBUG_INFO("%s: Fatal error value: 0x%08X\n",
- priv->net_dev->name, priv->fatal_error);
-
- read_nic_dword(dev, IPW_ERROR_ADDR(priv->fatal_error), &tmp);
- IPW_DEBUG_INFO("%s: Fatal error address value: 0x%08X\n",
- priv->net_dev->name, tmp);
-
- /* Wake up any sleeping jobs */
- schedule_reset(priv);
- }
-
- if (inta & IPW2100_INTA_PARITY_ERROR) {
- printk(KERN_ERR DRV_NAME
- ": ***** PARITY ERROR INTERRUPT !!!! \n");
- priv->inta_other++;
- write_register(dev, IPW_REG_INTA, IPW2100_INTA_PARITY_ERROR);
- }
-
- if (inta & IPW2100_INTA_RX_TRANSFER) {
- IPW_DEBUG_ISR("RX interrupt\n");
-
- priv->rx_interrupts++;
-
- write_register(dev, IPW_REG_INTA, IPW2100_INTA_RX_TRANSFER);
-
- __ipw2100_rx_process(priv);
- __ipw2100_tx_complete(priv);
- }
-
- if (inta & IPW2100_INTA_TX_TRANSFER) {
- IPW_DEBUG_ISR("TX interrupt\n");
-
- priv->tx_interrupts++;
-
- write_register(dev, IPW_REG_INTA, IPW2100_INTA_TX_TRANSFER);
-
- __ipw2100_tx_complete(priv);
- ipw2100_tx_send_commands(priv);
- ipw2100_tx_send_data(priv);
- }
-
- if (inta & IPW2100_INTA_TX_COMPLETE) {
- IPW_DEBUG_ISR("TX complete\n");
- priv->inta_other++;
- write_register(dev, IPW_REG_INTA, IPW2100_INTA_TX_COMPLETE);
-
- __ipw2100_tx_complete(priv);
- }
-
- if (inta & IPW2100_INTA_EVENT_INTERRUPT) {
- /* ipw2100_handle_event(dev); */
- priv->inta_other++;
- write_register(dev, IPW_REG_INTA, IPW2100_INTA_EVENT_INTERRUPT);
- }
-
- if (inta & IPW2100_INTA_FW_INIT_DONE) {
- IPW_DEBUG_ISR("FW init done interrupt\n");
- priv->inta_other++;
-
- read_register(dev, IPW_REG_INTA, &tmp);
- if (tmp & (IPW2100_INTA_FATAL_ERROR |
- IPW2100_INTA_PARITY_ERROR)) {
- write_register(dev, IPW_REG_INTA,
- IPW2100_INTA_FATAL_ERROR |
- IPW2100_INTA_PARITY_ERROR);
- }
-
- write_register(dev, IPW_REG_INTA, IPW2100_INTA_FW_INIT_DONE);
- }
-
- if (inta & IPW2100_INTA_STATUS_CHANGE) {
- IPW_DEBUG_ISR("Status change interrupt\n");
- priv->inta_other++;
- write_register(dev, IPW_REG_INTA, IPW2100_INTA_STATUS_CHANGE);
- }
-
- if (inta & IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE) {
- IPW_DEBUG_ISR("slave host mode interrupt\n");
- priv->inta_other++;
- write_register(dev, IPW_REG_INTA,
- IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE);
- }
-
- priv->in_isr--;
- ipw2100_enable_interrupts(priv);
-
- spin_unlock_irqrestore(&priv->low_lock, flags);
-
- IPW_DEBUG_ISR("exit\n");
-}
-
-static irqreturn_t ipw2100_interrupt(int irq, void *data)
-{
- struct ipw2100_priv *priv = data;
- u32 inta, inta_mask;
-
- if (!data)
- return IRQ_NONE;
-
- spin_lock(&priv->low_lock);
-
- /* We check to see if we should be ignoring interrupts before
- * we touch the hardware. During ucode load if we try and handle
- * an interrupt we can cause keyboard problems as well as cause
- * the ucode to fail to initialize */
- if (!(priv->status & STATUS_INT_ENABLED)) {
- /* Shared IRQ */
- goto none;
- }
-
- read_register(priv->net_dev, IPW_REG_INTA_MASK, &inta_mask);
- read_register(priv->net_dev, IPW_REG_INTA, &inta);
-
- if (inta == 0xFFFFFFFF) {
- /* Hardware disappeared */
- printk(KERN_WARNING DRV_NAME ": IRQ INTA == 0xFFFFFFFF\n");
- goto none;
- }
-
- inta &= IPW_INTERRUPT_MASK;
-
- if (!(inta & inta_mask)) {
- /* Shared interrupt */
- goto none;
- }
-
- /* We disable the hardware interrupt here just to prevent unneeded
- * calls to be made. We disable this again within the actual
- * work tasklet, so if another part of the code re-enables the
- * interrupt, that is fine */
- ipw2100_disable_interrupts(priv);
-
- tasklet_schedule(&priv->irq_tasklet);
- spin_unlock(&priv->low_lock);
-
- return IRQ_HANDLED;
- none:
- spin_unlock(&priv->low_lock);
- return IRQ_NONE;
-}
-
-static int ipw2100_tx(struct ieee80211_txb *txb, struct net_device *dev,
- int pri)
-{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- struct list_head *element;
- struct ipw2100_tx_packet *packet;
- unsigned long flags;
-
- spin_lock_irqsave(&priv->low_lock, flags);
-
- if (!(priv->status & STATUS_ASSOCIATED)) {
- IPW_DEBUG_INFO("Can not transmit when not connected.\n");
- priv->ieee->stats.tx_carrier_errors++;
- netif_stop_queue(dev);
- goto fail_unlock;
- }
-
- if (list_empty(&priv->tx_free_list))
- goto fail_unlock;
-
- element = priv->tx_free_list.next;
- packet = list_entry(element, struct ipw2100_tx_packet, list);
-
- packet->info.d_struct.txb = txb;
-
- IPW_DEBUG_TX("Sending fragment (%d bytes):\n", txb->fragments[0]->len);
- printk_buf(IPW_DL_TX, txb->fragments[0]->data, txb->fragments[0]->len);
-
- packet->jiffy_start = jiffies;
-
- list_del(element);
- DEC_STAT(&priv->tx_free_stat);
-
- list_add_tail(element, &priv->tx_pend_list);
- INC_STAT(&priv->tx_pend_stat);
-
- ipw2100_tx_send_data(priv);
-
- spin_unlock_irqrestore(&priv->low_lock, flags);
- return 0;
-
- fail_unlock:
- netif_stop_queue(dev);
- spin_unlock_irqrestore(&priv->low_lock, flags);
- return 1;
-}
-
-static int ipw2100_msg_allocate(struct ipw2100_priv *priv)
-{
- int i, j, err = -EINVAL;
- void *v;
- dma_addr_t p;
-
- priv->msg_buffers =
- (struct ipw2100_tx_packet *)kmalloc(IPW_COMMAND_POOL_SIZE *
- sizeof(struct
- ipw2100_tx_packet),
- GFP_KERNEL);
- if (!priv->msg_buffers) {
- printk(KERN_ERR DRV_NAME ": %s: PCI alloc failed for msg "
- "buffers.\n", priv->net_dev->name);
- return -ENOMEM;
- }
-
- for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++) {
- v = pci_alloc_consistent(priv->pci_dev,
- sizeof(struct ipw2100_cmd_header), &p);
- if (!v) {
- printk(KERN_ERR DRV_NAME ": "
- "%s: PCI alloc failed for msg "
- "buffers.\n", priv->net_dev->name);
- err = -ENOMEM;
- break;
- }
-
- memset(v, 0, sizeof(struct ipw2100_cmd_header));
-
- priv->msg_buffers[i].type = COMMAND;
- priv->msg_buffers[i].info.c_struct.cmd =
- (struct ipw2100_cmd_header *)v;
- priv->msg_buffers[i].info.c_struct.cmd_phys = p;
- }
-
- if (i == IPW_COMMAND_POOL_SIZE)
- return 0;
-
- for (j = 0; j < i; j++) {
- pci_free_consistent(priv->pci_dev,
- sizeof(struct ipw2100_cmd_header),
- priv->msg_buffers[j].info.c_struct.cmd,
- priv->msg_buffers[j].info.c_struct.
- cmd_phys);
- }
-
- kfree(priv->msg_buffers);
- priv->msg_buffers = NULL;
-
- return err;
-}
-
-static int ipw2100_msg_initialize(struct ipw2100_priv *priv)
-{
- int i;
-
- INIT_LIST_HEAD(&priv->msg_free_list);
- INIT_LIST_HEAD(&priv->msg_pend_list);
-
- for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++)
- list_add_tail(&priv->msg_buffers[i].list, &priv->msg_free_list);
- SET_STAT(&priv->msg_free_stat, i);
-
- return 0;
-}
-
-static void ipw2100_msg_free(struct ipw2100_priv *priv)
-{
- int i;
-
- if (!priv->msg_buffers)
- return;
-
- for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++) {
- pci_free_consistent(priv->pci_dev,
- sizeof(struct ipw2100_cmd_header),
- priv->msg_buffers[i].info.c_struct.cmd,
- priv->msg_buffers[i].info.c_struct.
- cmd_phys);
- }
-
- kfree(priv->msg_buffers);
- priv->msg_buffers = NULL;
-}
-
-static ssize_t show_pci(struct device *d, struct device_attribute *attr,
- char *buf)
-{
- struct pci_dev *pci_dev = container_of(d, struct pci_dev, dev);
- char *out = buf;
- int i, j;
- u32 val;
-
- for (i = 0; i < 16; i++) {
- out += sprintf(out, "[%08X] ", i * 16);
- for (j = 0; j < 16; j += 4) {
- pci_read_config_dword(pci_dev, i * 16 + j, &val);
- out += sprintf(out, "%08X ", val);
- }
- out += sprintf(out, "\n");
- }
-
- return out - buf;
-}
-
-static DEVICE_ATTR(pci, S_IRUGO, show_pci, NULL);
-
-static ssize_t show_cfg(struct device *d, struct device_attribute *attr,
- char *buf)
-{
- struct ipw2100_priv *p = d->driver_data;
- return sprintf(buf, "0x%08x\n", (int)p->config);
-}
-
-static DEVICE_ATTR(cfg, S_IRUGO, show_cfg, NULL);
-
-static ssize_t show_status(struct device *d, struct device_attribute *attr,
- char *buf)
-{
- struct ipw2100_priv *p = d->driver_data;
- return sprintf(buf, "0x%08x\n", (int)p->status);
-}
-
-static DEVICE_ATTR(status, S_IRUGO, show_status, NULL);
-
-static ssize_t show_capability(struct device *d, struct device_attribute *attr,
- char *buf)
-{
- struct ipw2100_priv *p = d->driver_data;
- return sprintf(buf, "0x%08x\n", (int)p->capability);
-}
-
-static DEVICE_ATTR(capability, S_IRUGO, show_capability, NULL);
-
-#define IPW2100_REG(x) { IPW_ ##x, #x }
-static const struct {
- u32 addr;
- const char *name;
-} hw_data[] = {
-IPW2100_REG(REG_GP_CNTRL),
- IPW2100_REG(REG_GPIO),
- IPW2100_REG(REG_INTA),
- IPW2100_REG(REG_INTA_MASK), IPW2100_REG(REG_RESET_REG),};
-#define IPW2100_NIC(x, s) { x, #x, s }
-static const struct {
- u32 addr;
- const char *name;
- size_t size;
-} nic_data[] = {
-IPW2100_NIC(IPW2100_CONTROL_REG, 2),
- IPW2100_NIC(0x210014, 1), IPW2100_NIC(0x210000, 1),};
-#define IPW2100_ORD(x, d) { IPW_ORD_ ##x, #x, d }
-static const struct {
- u8 index;
- const char *name;
- const char *desc;
-} ord_data[] = {
-IPW2100_ORD(STAT_TX_HOST_REQUESTS, "requested Host Tx's (MSDU)"),
- IPW2100_ORD(STAT_TX_HOST_COMPLETE,
- "successful Host Tx's (MSDU)"),
- IPW2100_ORD(STAT_TX_DIR_DATA,
- "successful Directed Tx's (MSDU)"),
- IPW2100_ORD(STAT_TX_DIR_DATA1,
- "successful Directed Tx's (MSDU) @ 1MB"),
- IPW2100_ORD(STAT_TX_DIR_DATA2,
- "successful Directed Tx's (MSDU) @ 2MB"),
- IPW2100_ORD(STAT_TX_DIR_DATA5_5,
- "successful Directed Tx's (MSDU) @ 5_5MB"),
- IPW2100_ORD(STAT_TX_DIR_DATA11,
- "successful Directed Tx's (MSDU) @ 11MB"),
- IPW2100_ORD(STAT_TX_NODIR_DATA1,
- "successful Non_Directed Tx's (MSDU) @ 1MB"),
- IPW2100_ORD(STAT_TX_NODIR_DATA2,
- "successful Non_Directed Tx's (MSDU) @ 2MB"),
- IPW2100_ORD(STAT_TX_NODIR_DATA5_5,
- "successful Non_Directed Tx's (MSDU) @ 5.5MB"),
- IPW2100_ORD(STAT_TX_NODIR_DATA11,
- "successful Non_Directed Tx's (MSDU) @ 11MB"),
- IPW2100_ORD(STAT_NULL_DATA, "successful NULL data Tx's"),
- IPW2100_ORD(STAT_TX_RTS, "successful Tx RTS"),
- IPW2100_ORD(STAT_TX_CTS, "successful Tx CTS"),
- IPW2100_ORD(STAT_TX_ACK, "successful Tx ACK"),
- IPW2100_ORD(STAT_TX_ASSN, "successful Association Tx's"),
- IPW2100_ORD(STAT_TX_ASSN_RESP,
- "successful Association response Tx's"),
- IPW2100_ORD(STAT_TX_REASSN,
- "successful Reassociation Tx's"),
- IPW2100_ORD(STAT_TX_REASSN_RESP,
- "successful Reassociation response Tx's"),
- IPW2100_ORD(STAT_TX_PROBE,
- "probes successfully transmitted"),
- IPW2100_ORD(STAT_TX_PROBE_RESP,
- "probe responses successfully transmitted"),
- IPW2100_ORD(STAT_TX_BEACON, "tx beacon"),
- IPW2100_ORD(STAT_TX_ATIM, "Tx ATIM"),
- IPW2100_ORD(STAT_TX_DISASSN,
- "successful Disassociation TX"),
- IPW2100_ORD(STAT_TX_AUTH, "successful Authentication Tx"),
- IPW2100_ORD(STAT_TX_DEAUTH,
- "successful Deauthentication TX"),
- IPW2100_ORD(STAT_TX_TOTAL_BYTES,
- "Total successful Tx data bytes"),
- IPW2100_ORD(STAT_TX_RETRIES, "Tx retries"),
- IPW2100_ORD(STAT_TX_RETRY1, "Tx retries at 1MBPS"),
- IPW2100_ORD(STAT_TX_RETRY2, "Tx retries at 2MBPS"),
- IPW2100_ORD(STAT_TX_RETRY5_5, "Tx retries at 5.5MBPS"),
- IPW2100_ORD(STAT_TX_RETRY11, "Tx retries at 11MBPS"),
- IPW2100_ORD(STAT_TX_FAILURES, "Tx Failures"),
- IPW2100_ORD(STAT_TX_MAX_TRIES_IN_HOP,
- "times max tries in a hop failed"),
- IPW2100_ORD(STAT_TX_DISASSN_FAIL,
- "times disassociation failed"),
- IPW2100_ORD(STAT_TX_ERR_CTS, "missed/bad CTS frames"),
- IPW2100_ORD(STAT_TX_ERR_ACK, "tx err due to acks"),
- IPW2100_ORD(STAT_RX_HOST, "packets passed to host"),
- IPW2100_ORD(STAT_RX_DIR_DATA, "directed packets"),
- IPW2100_ORD(STAT_RX_DIR_DATA1, "directed packets at 1MB"),
- IPW2100_ORD(STAT_RX_DIR_DATA2, "directed packets at 2MB"),
- IPW2100_ORD(STAT_RX_DIR_DATA5_5,
- "directed packets at 5.5MB"),
- IPW2100_ORD(STAT_RX_DIR_DATA11, "directed packets at 11MB"),
- IPW2100_ORD(STAT_RX_NODIR_DATA, "nondirected packets"),
- IPW2100_ORD(STAT_RX_NODIR_DATA1,
- "nondirected packets at 1MB"),
- IPW2100_ORD(STAT_RX_NODIR_DATA2,
- "nondirected packets at 2MB"),
- IPW2100_ORD(STAT_RX_NODIR_DATA5_5,
- "nondirected packets at 5.5MB"),
- IPW2100_ORD(STAT_RX_NODIR_DATA11,
- "nondirected packets at 11MB"),
- IPW2100_ORD(STAT_RX_NULL_DATA, "null data rx's"),
- IPW2100_ORD(STAT_RX_RTS, "Rx RTS"), IPW2100_ORD(STAT_RX_CTS,
- "Rx CTS"),
- IPW2100_ORD(STAT_RX_ACK, "Rx ACK"),
- IPW2100_ORD(STAT_RX_CFEND, "Rx CF End"),
- IPW2100_ORD(STAT_RX_CFEND_ACK, "Rx CF End + CF Ack"),
- IPW2100_ORD(STAT_RX_ASSN, "Association Rx's"),
- IPW2100_ORD(STAT_RX_ASSN_RESP, "Association response Rx's"),
- IPW2100_ORD(STAT_RX_REASSN, "Reassociation Rx's"),
- IPW2100_ORD(STAT_RX_REASSN_RESP,
- "Reassociation response Rx's"),
- IPW2100_ORD(STAT_RX_PROBE, "probe Rx's"),
- IPW2100_ORD(STAT_RX_PROBE_RESP, "probe response Rx's"),
- IPW2100_ORD(STAT_RX_BEACON, "Rx beacon"),
- IPW2100_ORD(STAT_RX_ATIM, "Rx ATIM"),
- IPW2100_ORD(STAT_RX_DISASSN, "disassociation Rx"),
- IPW2100_ORD(STAT_RX_AUTH, "authentication Rx"),
- IPW2100_ORD(STAT_RX_DEAUTH, "deauthentication Rx"),
- IPW2100_ORD(STAT_RX_TOTAL_BYTES,
- "Total rx data bytes received"),
- IPW2100_ORD(STAT_RX_ERR_CRC, "packets with Rx CRC error"),
- IPW2100_ORD(STAT_RX_ERR_CRC1, "Rx CRC errors at 1MB"),
- IPW2100_ORD(STAT_RX_ERR_CRC2, "Rx CRC errors at 2MB"),
- IPW2100_ORD(STAT_RX_ERR_CRC5_5, "Rx CRC errors at 5.5MB"),
- IPW2100_ORD(STAT_RX_ERR_CRC11, "Rx CRC errors at 11MB"),
- IPW2100_ORD(STAT_RX_DUPLICATE1,
- "duplicate rx packets at 1MB"),
- IPW2100_ORD(STAT_RX_DUPLICATE2,
- "duplicate rx packets at 2MB"),
- IPW2100_ORD(STAT_RX_DUPLICATE5_5,
- "duplicate rx packets at 5.5MB"),
- IPW2100_ORD(STAT_RX_DUPLICATE11,
- "duplicate rx packets at 11MB"),
- IPW2100_ORD(STAT_RX_DUPLICATE, "duplicate rx packets"),
- IPW2100_ORD(PERS_DB_LOCK, "locking fw permanent db"),
- IPW2100_ORD(PERS_DB_SIZE, "size of fw permanent db"),
- IPW2100_ORD(PERS_DB_ADDR, "address of fw permanent db"),
- IPW2100_ORD(STAT_RX_INVALID_PROTOCOL,
- "rx frames with invalid protocol"),
- IPW2100_ORD(SYS_BOOT_TIME, "Boot time"),
- IPW2100_ORD(STAT_RX_NO_BUFFER,
- "rx frames rejected due to no buffer"),
- IPW2100_ORD(STAT_RX_MISSING_FRAG,
- "rx frames dropped due to missing fragment"),
- IPW2100_ORD(STAT_RX_ORPHAN_FRAG,
- "rx frames dropped due to non-sequential fragment"),
- IPW2100_ORD(STAT_RX_ORPHAN_FRAME,
- "rx frames dropped due to unmatched 1st frame"),
- IPW2100_ORD(STAT_RX_FRAG_AGEOUT,
- "rx frames dropped due to uncompleted frame"),
- IPW2100_ORD(STAT_RX_ICV_ERRORS,
- "ICV errors during decryption"),
- IPW2100_ORD(STAT_PSP_SUSPENSION, "times adapter suspended"),
- IPW2100_ORD(STAT_PSP_BCN_TIMEOUT, "beacon timeout"),
- IPW2100_ORD(STAT_PSP_POLL_TIMEOUT,
- "poll response timeouts"),
- IPW2100_ORD(STAT_PSP_NONDIR_TIMEOUT,
- "timeouts waiting for last {broad,multi}cast pkt"),
- IPW2100_ORD(STAT_PSP_RX_DTIMS, "PSP DTIMs received"),
- IPW2100_ORD(STAT_PSP_RX_TIMS, "PSP TIMs received"),
- IPW2100_ORD(STAT_PSP_STATION_ID, "PSP Station ID"),
- IPW2100_ORD(LAST_ASSN_TIME, "RTC time of last association"),
- IPW2100_ORD(STAT_PERCENT_MISSED_BCNS,
- "current calculation of % missed beacons"),
- IPW2100_ORD(STAT_PERCENT_RETRIES,
- "current calculation of % missed tx retries"),
- IPW2100_ORD(ASSOCIATED_AP_PTR,
- "0 if not associated, else pointer to AP table entry"),
- IPW2100_ORD(AVAILABLE_AP_CNT,
- "AP's decsribed in the AP table"),
- IPW2100_ORD(AP_LIST_PTR, "Ptr to list of available APs"),
- IPW2100_ORD(STAT_AP_ASSNS, "associations"),
- IPW2100_ORD(STAT_ASSN_FAIL, "association failures"),
- IPW2100_ORD(STAT_ASSN_RESP_FAIL,
- "failures due to response fail"),
- IPW2100_ORD(STAT_FULL_SCANS, "full scans"),
- IPW2100_ORD(CARD_DISABLED, "Card Disabled"),
- IPW2100_ORD(STAT_ROAM_INHIBIT,
- "times roaming was inhibited due to activity"),
- IPW2100_ORD(RSSI_AT_ASSN,
- "RSSI of associated AP at time of association"),
- IPW2100_ORD(STAT_ASSN_CAUSE1,
- "reassociation: no probe response or TX on hop"),
- IPW2100_ORD(STAT_ASSN_CAUSE2,
- "reassociation: poor tx/rx quality"),
- IPW2100_ORD(STAT_ASSN_CAUSE3,
- "reassociation: tx/rx quality (excessive AP load"),
- IPW2100_ORD(STAT_ASSN_CAUSE4,
- "reassociation: AP RSSI level"),
- IPW2100_ORD(STAT_ASSN_CAUSE5,
- "reassociations due to load leveling"),
- IPW2100_ORD(STAT_AUTH_FAIL, "times authentication failed"),
- IPW2100_ORD(STAT_AUTH_RESP_FAIL,
- "times authentication response failed"),
- IPW2100_ORD(STATION_TABLE_CNT,
- "entries in association table"),
- IPW2100_ORD(RSSI_AVG_CURR, "Current avg RSSI"),
- IPW2100_ORD(POWER_MGMT_MODE, "Power mode - 0=CAM, 1=PSP"),
- IPW2100_ORD(COUNTRY_CODE,
- "IEEE country code as recv'd from beacon"),
- IPW2100_ORD(COUNTRY_CHANNELS,
- "channels suported by country"),
- IPW2100_ORD(RESET_CNT, "adapter resets (warm)"),
- IPW2100_ORD(BEACON_INTERVAL, "Beacon interval"),
- IPW2100_ORD(ANTENNA_DIVERSITY,
- "TRUE if antenna diversity is disabled"),
- IPW2100_ORD(DTIM_PERIOD, "beacon intervals between DTIMs"),
- IPW2100_ORD(OUR_FREQ,
- "current radio freq lower digits - channel ID"),
- IPW2100_ORD(RTC_TIME, "current RTC time"),
- IPW2100_ORD(PORT_TYPE, "operating mode"),
- IPW2100_ORD(CURRENT_TX_RATE, "current tx rate"),
- IPW2100_ORD(SUPPORTED_RATES, "supported tx rates"),
- IPW2100_ORD(ATIM_WINDOW, "current ATIM Window"),
- IPW2100_ORD(BASIC_RATES, "basic tx rates"),
- IPW2100_ORD(NIC_HIGHEST_RATE, "NIC highest tx rate"),
- IPW2100_ORD(AP_HIGHEST_RATE, "AP highest tx rate"),
- IPW2100_ORD(CAPABILITIES,
- "Management frame capability field"),
- IPW2100_ORD(AUTH_TYPE, "Type of authentication"),
- IPW2100_ORD(RADIO_TYPE, "Adapter card platform type"),
- IPW2100_ORD(RTS_THRESHOLD,
- "Min packet length for RTS handshaking"),
- IPW2100_ORD(INT_MODE, "International mode"),
- IPW2100_ORD(FRAGMENTATION_THRESHOLD,
- "protocol frag threshold"),
- IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_START_ADDRESS,
- "EEPROM offset in SRAM"),
- IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_SIZE,
- "EEPROM size in SRAM"),
- IPW2100_ORD(EEPROM_SKU_CAPABILITY, "EEPROM SKU Capability"),
- IPW2100_ORD(EEPROM_IBSS_11B_CHANNELS,
- "EEPROM IBSS 11b channel set"),
- IPW2100_ORD(MAC_VERSION, "MAC Version"),
- IPW2100_ORD(MAC_REVISION, "MAC Revision"),
- IPW2100_ORD(RADIO_VERSION, "Radio Version"),
- IPW2100_ORD(NIC_MANF_DATE_TIME, "MANF Date/Time STAMP"),
- IPW2100_ORD(UCODE_VERSION, "Ucode Version"),};
-
-static ssize_t show_registers(struct device *d, struct device_attribute *attr,
- char *buf)
-{
- int i;
- struct ipw2100_priv *priv = dev_get_drvdata(d);
- struct net_device *dev = priv->net_dev;
- char *out = buf;
- u32 val = 0;
-
- out += sprintf(out, "%30s [Address ] : Hex\n", "Register");
-
- for (i = 0; i < ARRAY_SIZE(hw_data); i++) {
- read_register(dev, hw_data[i].addr, &val);
- out += sprintf(out, "%30s [%08X] : %08X\n",
- hw_data[i].name, hw_data[i].addr, val);
- }
-
- return out - buf;
-}
-
-static DEVICE_ATTR(registers, S_IRUGO, show_registers, NULL);
-
-static ssize_t show_hardware(struct device *d, struct device_attribute *attr,
- char *buf)
-{
- struct ipw2100_priv *priv = dev_get_drvdata(d);
- struct net_device *dev = priv->net_dev;
- char *out = buf;
- int i;
-
- out += sprintf(out, "%30s [Address ] : Hex\n", "NIC entry");
-
- for (i = 0; i < ARRAY_SIZE(nic_data); i++) {
- u8 tmp8;
- u16 tmp16;
- u32 tmp32;
-
- switch (nic_data[i].size) {
- case 1:
- read_nic_byte(dev, nic_data[i].addr, &tmp8);
- out += sprintf(out, "%30s [%08X] : %02X\n",
- nic_data[i].name, nic_data[i].addr,
- tmp8);
- break;
- case 2:
- read_nic_word(dev, nic_data[i].addr, &tmp16);
- out += sprintf(out, "%30s [%08X] : %04X\n",
- nic_data[i].name, nic_data[i].addr,
- tmp16);
- break;
- case 4:
- read_nic_dword(dev, nic_data[i].addr, &tmp32);
- out += sprintf(out, "%30s [%08X] : %08X\n",
- nic_data[i].name, nic_data[i].addr,
- tmp32);
- break;
- }
- }
- return out - buf;
-}
-
-static DEVICE_ATTR(hardware, S_IRUGO, show_hardware, NULL);
-
-static ssize_t show_memory(struct device *d, struct device_attribute *attr,
- char *buf)
-{
- struct ipw2100_priv *priv = dev_get_drvdata(d);
- struct net_device *dev = priv->net_dev;
- static unsigned long loop = 0;
- int len = 0;
- u32 buffer[4];
- int i;
- char line[81];
-
- if (loop >= 0x30000)
- loop = 0;
-
- /* sysfs provides us PAGE_SIZE buffer */
- while (len < PAGE_SIZE - 128 && loop < 0x30000) {
-
- if (priv->snapshot[0])
- for (i = 0; i < 4; i++)
- buffer[i] =
- *(u32 *) SNAPSHOT_ADDR(loop + i * 4);
- else
- for (i = 0; i < 4; i++)
- read_nic_dword(dev, loop + i * 4, &buffer[i]);
-
- if (priv->dump_raw)
- len += sprintf(buf + len,
- "%c%c%c%c"
- "%c%c%c%c"
- "%c%c%c%c"
- "%c%c%c%c",
- ((u8 *) buffer)[0x0],
- ((u8 *) buffer)[0x1],
- ((u8 *) buffer)[0x2],
- ((u8 *) buffer)[0x3],
- ((u8 *) buffer)[0x4],
- ((u8 *) buffer)[0x5],
- ((u8 *) buffer)[0x6],
- ((u8 *) buffer)[0x7],
- ((u8 *) buffer)[0x8],
- ((u8 *) buffer)[0x9],
- ((u8 *) buffer)[0xa],
- ((u8 *) buffer)[0xb],
- ((u8 *) buffer)[0xc],
- ((u8 *) buffer)[0xd],
- ((u8 *) buffer)[0xe],
- ((u8 *) buffer)[0xf]);
- else
- len += sprintf(buf + len, "%s\n",
- snprint_line(line, sizeof(line),
- (u8 *) buffer, 16, loop));
- loop += 16;
- }
-
- return len;
-}
-
-static ssize_t store_memory(struct device *d, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct ipw2100_priv *priv = dev_get_drvdata(d);
- struct net_device *dev = priv->net_dev;
- const char *p = buf;
-
- (void)dev; /* kill unused-var warning for debug-only code */
-
- if (count < 1)
- return count;
-
- if (p[0] == '1' ||
- (count >= 2 && tolower(p[0]) == 'o' && tolower(p[1]) == 'n')) {
- IPW_DEBUG_INFO("%s: Setting memory dump to RAW mode.\n",
- dev->name);
- priv->dump_raw = 1;
-
- } else if (p[0] == '0' || (count >= 2 && tolower(p[0]) == 'o' &&
- tolower(p[1]) == 'f')) {
- IPW_DEBUG_INFO("%s: Setting memory dump to HEX mode.\n",
- dev->name);
- priv->dump_raw = 0;
-
- } else if (tolower(p[0]) == 'r') {
- IPW_DEBUG_INFO("%s: Resetting firmware snapshot.\n", dev->name);
- ipw2100_snapshot_free(priv);
-
- } else
- IPW_DEBUG_INFO("%s: Usage: 0|on = HEX, 1|off = RAW, "
- "reset = clear memory snapshot\n", dev->name);
-
- return count;
-}
-
-static DEVICE_ATTR(memory, S_IWUSR | S_IRUGO, show_memory, store_memory);
-
-static ssize_t show_ordinals(struct device *d, struct device_attribute *attr,
- char *buf)
-{
- struct ipw2100_priv *priv = dev_get_drvdata(d);
- u32 val = 0;
- int len = 0;
- u32 val_len;
- static int loop = 0;
-
- if (priv->status & STATUS_RF_KILL_MASK)
- return 0;
-
- if (loop >= ARRAY_SIZE(ord_data))
- loop = 0;
-
- /* sysfs provides us PAGE_SIZE buffer */
- while (len < PAGE_SIZE - 128 && loop < ARRAY_SIZE(ord_data)) {
- val_len = sizeof(u32);
-
- if (ipw2100_get_ordinal(priv, ord_data[loop].index, &val,
- &val_len))
- len += sprintf(buf + len, "[0x%02X] = ERROR %s\n",
- ord_data[loop].index,
- ord_data[loop].desc);
- else
- len += sprintf(buf + len, "[0x%02X] = 0x%08X %s\n",
- ord_data[loop].index, val,
- ord_data[loop].desc);
- loop++;
- }
-
- return len;
-}
-
-static DEVICE_ATTR(ordinals, S_IRUGO, show_ordinals, NULL);
-
-static ssize_t show_stats(struct device *d, struct device_attribute *attr,
- char *buf)
-{
- struct ipw2100_priv *priv = dev_get_drvdata(d);
- char *out = buf;
-
- out += sprintf(out, "interrupts: %d {tx: %d, rx: %d, other: %d}\n",
- priv->interrupts, priv->tx_interrupts,
- priv->rx_interrupts, priv->inta_other);
- out += sprintf(out, "firmware resets: %d\n", priv->resets);
- out += sprintf(out, "firmware hangs: %d\n", priv->hangs);
-#ifdef CONFIG_IPW2100_DEBUG
- out += sprintf(out, "packet mismatch image: %s\n",
- priv->snapshot[0] ? "YES" : "NO");
-#endif
-
- return out - buf;
-}
-
-static DEVICE_ATTR(stats, S_IRUGO, show_stats, NULL);
-
-static int ipw2100_switch_mode(struct ipw2100_priv *priv, u32 mode)
-{
- int err;
-
- if (mode == priv->ieee->iw_mode)
- return 0;
-
- err = ipw2100_disable_adapter(priv);
- if (err) {
- printk(KERN_ERR DRV_NAME ": %s: Could not disable adapter %d\n",
- priv->net_dev->name, err);
- return err;
- }
-
- switch (mode) {
- case IW_MODE_INFRA:
- priv->net_dev->type = ARPHRD_ETHER;
- break;
- case IW_MODE_ADHOC:
- priv->net_dev->type = ARPHRD_ETHER;
- break;
-#ifdef CONFIG_IPW2100_MONITOR
- case IW_MODE_MONITOR:
- priv->last_mode = priv->ieee->iw_mode;
- priv->net_dev->type = ARPHRD_IEEE80211_RADIOTAP;
- break;
-#endif /* CONFIG_IPW2100_MONITOR */
- }
-
- priv->ieee->iw_mode = mode;
-
-#ifdef CONFIG_PM
- /* Indicate ipw2100_download_firmware download firmware
- * from disk instead of memory. */
- ipw2100_firmware.version = 0;
-#endif
-
- printk(KERN_INFO "%s: Reseting on mode change.\n", priv->net_dev->name);
- priv->reset_backoff = 0;
- schedule_reset(priv);
-
- return 0;
-}
-
-static ssize_t show_internals(struct device *d, struct device_attribute *attr,
- char *buf)
-{
- struct ipw2100_priv *priv = dev_get_drvdata(d);
- int len = 0;
-
-#define DUMP_VAR(x,y) len += sprintf(buf + len, # x ": %" y "\n", priv-> x)
-
- if (priv->status & STATUS_ASSOCIATED)
- len += sprintf(buf + len, "connected: %lu\n",
- get_seconds() - priv->connect_start);
- else
- len += sprintf(buf + len, "not connected\n");
-
- DUMP_VAR(ieee->crypt_info.crypt[priv->ieee->crypt_info.tx_keyidx], "p");
- DUMP_VAR(status, "08lx");
- DUMP_VAR(config, "08lx");
- DUMP_VAR(capability, "08lx");
-
- len +=
- sprintf(buf + len, "last_rtc: %lu\n",
- (unsigned long)priv->last_rtc);
-
- DUMP_VAR(fatal_error, "d");
- DUMP_VAR(stop_hang_check, "d");
- DUMP_VAR(stop_rf_kill, "d");
- DUMP_VAR(messages_sent, "d");
-
- DUMP_VAR(tx_pend_stat.value, "d");
- DUMP_VAR(tx_pend_stat.hi, "d");
-
- DUMP_VAR(tx_free_stat.value, "d");
- DUMP_VAR(tx_free_stat.lo, "d");
-
- DUMP_VAR(msg_free_stat.value, "d");
- DUMP_VAR(msg_free_stat.lo, "d");
-
- DUMP_VAR(msg_pend_stat.value, "d");
- DUMP_VAR(msg_pend_stat.hi, "d");
-
- DUMP_VAR(fw_pend_stat.value, "d");
- DUMP_VAR(fw_pend_stat.hi, "d");
-
- DUMP_VAR(txq_stat.value, "d");
- DUMP_VAR(txq_stat.lo, "d");
-
- DUMP_VAR(ieee->scans, "d");
- DUMP_VAR(reset_backoff, "d");
-
- return len;
-}
-
-static DEVICE_ATTR(internals, S_IRUGO, show_internals, NULL);
-
-static ssize_t show_bssinfo(struct device *d, struct device_attribute *attr,
- char *buf)
-{
- struct ipw2100_priv *priv = dev_get_drvdata(d);
- char essid[IW_ESSID_MAX_SIZE + 1];
- u8 bssid[ETH_ALEN];
- u32 chan = 0;
- char *out = buf;
- int length;
- int ret;
-
- if (priv->status & STATUS_RF_KILL_MASK)
- return 0;
-
- memset(essid, 0, sizeof(essid));
- memset(bssid, 0, sizeof(bssid));
-
- length = IW_ESSID_MAX_SIZE;
- ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_SSID, essid, &length);
- if (ret)
- IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
- __LINE__);
-
- length = sizeof(bssid);
- ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID,
- bssid, &length);
- if (ret)
- IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
- __LINE__);
-
- length = sizeof(u32);
- ret = ipw2100_get_ordinal(priv, IPW_ORD_OUR_FREQ, &chan, &length);
- if (ret)
- IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
- __LINE__);
-
- out += sprintf(out, "ESSID: %s\n", essid);
- out += sprintf(out, "BSSID: %pM\n", bssid);
- out += sprintf(out, "Channel: %d\n", chan);
-
- return out - buf;
-}
-
-static DEVICE_ATTR(bssinfo, S_IRUGO, show_bssinfo, NULL);
-
-#ifdef CONFIG_IPW2100_DEBUG
-static ssize_t show_debug_level(struct device_driver *d, char *buf)
-{
- return sprintf(buf, "0x%08X\n", ipw2100_debug_level);
-}
-
-static ssize_t store_debug_level(struct device_driver *d,
- const char *buf, size_t count)
-{
- char *p = (char *)buf;
- u32 val;
-
- if (p[1] == 'x' || p[1] == 'X' || p[0] == 'x' || p[0] == 'X') {
- p++;
- if (p[0] == 'x' || p[0] == 'X')
- p++;
- val = simple_strtoul(p, &p, 16);
- } else
- val = simple_strtoul(p, &p, 10);
- if (p == buf)
- IPW_DEBUG_INFO(": %s is not in hex or decimal form.\n", buf);
- else
- ipw2100_debug_level = val;
-
- return strnlen(buf, count);
-}
-
-static DRIVER_ATTR(debug_level, S_IWUSR | S_IRUGO, show_debug_level,
- store_debug_level);
-#endif /* CONFIG_IPW2100_DEBUG */
-
-static ssize_t show_fatal_error(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct ipw2100_priv *priv = dev_get_drvdata(d);
- char *out = buf;
- int i;
-
- if (priv->fatal_error)
- out += sprintf(out, "0x%08X\n", priv->fatal_error);
- else
- out += sprintf(out, "0\n");
-
- for (i = 1; i <= IPW2100_ERROR_QUEUE; i++) {
- if (!priv->fatal_errors[(priv->fatal_index - i) %
- IPW2100_ERROR_QUEUE])
- continue;
-
- out += sprintf(out, "%d. 0x%08X\n", i,
- priv->fatal_errors[(priv->fatal_index - i) %
- IPW2100_ERROR_QUEUE]);
- }
-
- return out - buf;
-}
-
-static ssize_t store_fatal_error(struct device *d,
- struct device_attribute *attr, const char *buf,
- size_t count)
-{
- struct ipw2100_priv *priv = dev_get_drvdata(d);
- schedule_reset(priv);
- return count;
-}
-
-static DEVICE_ATTR(fatal_error, S_IWUSR | S_IRUGO, show_fatal_error,
- store_fatal_error);
-
-static ssize_t show_scan_age(struct device *d, struct device_attribute *attr,
- char *buf)
-{
- struct ipw2100_priv *priv = dev_get_drvdata(d);
- return sprintf(buf, "%d\n", priv->ieee->scan_age);
-}
-
-static ssize_t store_scan_age(struct device *d, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct ipw2100_priv *priv = dev_get_drvdata(d);
- struct net_device *dev = priv->net_dev;
- char buffer[] = "00000000";
- unsigned long len =
- (sizeof(buffer) - 1) > count ? count : sizeof(buffer) - 1;
- unsigned long val;
- char *p = buffer;
-
- (void)dev; /* kill unused-var warning for debug-only code */
-
- IPW_DEBUG_INFO("enter\n");
-
- strncpy(buffer, buf, len);
- buffer[len] = 0;
-
- if (p[1] == 'x' || p[1] == 'X' || p[0] == 'x' || p[0] == 'X') {
- p++;
- if (p[0] == 'x' || p[0] == 'X')
- p++;
- val = simple_strtoul(p, &p, 16);
- } else
- val = simple_strtoul(p, &p, 10);
- if (p == buffer) {
- IPW_DEBUG_INFO("%s: user supplied invalid value.\n", dev->name);
- } else {
- priv->ieee->scan_age = val;
- IPW_DEBUG_INFO("set scan_age = %u\n", priv->ieee->scan_age);
- }
-
- IPW_DEBUG_INFO("exit\n");
- return len;
-}
-
-static DEVICE_ATTR(scan_age, S_IWUSR | S_IRUGO, show_scan_age, store_scan_age);
-
-static ssize_t show_rf_kill(struct device *d, struct device_attribute *attr,
- char *buf)
-{
- /* 0 - RF kill not enabled
- 1 - SW based RF kill active (sysfs)
- 2 - HW based RF kill active
- 3 - Both HW and SW baed RF kill active */
- struct ipw2100_priv *priv = (struct ipw2100_priv *)d->driver_data;
- int val = ((priv->status & STATUS_RF_KILL_SW) ? 0x1 : 0x0) |
- (rf_kill_active(priv) ? 0x2 : 0x0);
- return sprintf(buf, "%i\n", val);
-}
-
-static int ipw_radio_kill_sw(struct ipw2100_priv *priv, int disable_radio)
-{
- if ((disable_radio ? 1 : 0) ==
- (priv->status & STATUS_RF_KILL_SW ? 1 : 0))
- return 0;
-
- IPW_DEBUG_RF_KILL("Manual SW RF Kill set to: RADIO %s\n",
- disable_radio ? "OFF" : "ON");
-
- mutex_lock(&priv->action_mutex);
-
- if (disable_radio) {
- priv->status |= STATUS_RF_KILL_SW;
- ipw2100_down(priv);
- } else {
- priv->status &= ~STATUS_RF_KILL_SW;
- if (rf_kill_active(priv)) {
- IPW_DEBUG_RF_KILL("Can not turn radio back on - "
- "disabled by HW switch\n");
- /* Make sure the RF_KILL check timer is running */
- priv->stop_rf_kill = 0;
- cancel_delayed_work(&priv->rf_kill);
- queue_delayed_work(priv->workqueue, &priv->rf_kill,
- round_jiffies_relative(HZ));
- } else
- schedule_reset(priv);
- }
-
- mutex_unlock(&priv->action_mutex);
- return 1;
-}
-
-static ssize_t store_rf_kill(struct device *d, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct ipw2100_priv *priv = dev_get_drvdata(d);
- ipw_radio_kill_sw(priv, buf[0] == '1');
- return count;
-}
-
-static DEVICE_ATTR(rf_kill, S_IWUSR | S_IRUGO, show_rf_kill, store_rf_kill);
-
-static struct attribute *ipw2100_sysfs_entries[] = {
- &dev_attr_hardware.attr,
- &dev_attr_registers.attr,
- &dev_attr_ordinals.attr,
- &dev_attr_pci.attr,
- &dev_attr_stats.attr,
- &dev_attr_internals.attr,
- &dev_attr_bssinfo.attr,
- &dev_attr_memory.attr,
- &dev_attr_scan_age.attr,
- &dev_attr_fatal_error.attr,
- &dev_attr_rf_kill.attr,
- &dev_attr_cfg.attr,
- &dev_attr_status.attr,
- &dev_attr_capability.attr,
- NULL,
-};
-
-static struct attribute_group ipw2100_attribute_group = {
- .attrs = ipw2100_sysfs_entries,
-};
-
-static int status_queue_allocate(struct ipw2100_priv *priv, int entries)
-{
- struct ipw2100_status_queue *q = &priv->status_queue;
-
- IPW_DEBUG_INFO("enter\n");
-
- q->size = entries * sizeof(struct ipw2100_status);
- q->drv =
- (struct ipw2100_status *)pci_alloc_consistent(priv->pci_dev,
- q->size, &q->nic);
- if (!q->drv) {
- IPW_DEBUG_WARNING("Can not allocate status queue.\n");
- return -ENOMEM;
- }
-
- memset(q->drv, 0, q->size);
-
- IPW_DEBUG_INFO("exit\n");
-
- return 0;
-}
-
-static void status_queue_free(struct ipw2100_priv *priv)
-{
- IPW_DEBUG_INFO("enter\n");
-
- if (priv->status_queue.drv) {
- pci_free_consistent(priv->pci_dev, priv->status_queue.size,
- priv->status_queue.drv,
- priv->status_queue.nic);
- priv->status_queue.drv = NULL;
- }
-
- IPW_DEBUG_INFO("exit\n");
-}
-
-static int bd_queue_allocate(struct ipw2100_priv *priv,
- struct ipw2100_bd_queue *q, int entries)
-{
- IPW_DEBUG_INFO("enter\n");
-
- memset(q, 0, sizeof(struct ipw2100_bd_queue));
-
- q->entries = entries;
- q->size = entries * sizeof(struct ipw2100_bd);
- q->drv = pci_alloc_consistent(priv->pci_dev, q->size, &q->nic);
- if (!q->drv) {
- IPW_DEBUG_INFO
- ("can't allocate shared memory for buffer descriptors\n");
- return -ENOMEM;
- }
- memset(q->drv, 0, q->size);
-
- IPW_DEBUG_INFO("exit\n");
-
- return 0;
-}
-
-static void bd_queue_free(struct ipw2100_priv *priv, struct ipw2100_bd_queue *q)
-{
- IPW_DEBUG_INFO("enter\n");
-
- if (!q)
- return;
-
- if (q->drv) {
- pci_free_consistent(priv->pci_dev, q->size, q->drv, q->nic);
- q->drv = NULL;
- }
-
- IPW_DEBUG_INFO("exit\n");
-}
-
-static void bd_queue_initialize(struct ipw2100_priv *priv,
- struct ipw2100_bd_queue *q, u32 base, u32 size,
- u32 r, u32 w)
-{
- IPW_DEBUG_INFO("enter\n");
-
- IPW_DEBUG_INFO("initializing bd queue at virt=%p, phys=%08x\n", q->drv,
- (u32) q->nic);
-
- write_register(priv->net_dev, base, q->nic);
- write_register(priv->net_dev, size, q->entries);
- write_register(priv->net_dev, r, q->oldest);
- write_register(priv->net_dev, w, q->next);
-
- IPW_DEBUG_INFO("exit\n");
-}
-
-static void ipw2100_kill_workqueue(struct ipw2100_priv *priv)
-{
- if (priv->workqueue) {
- priv->stop_rf_kill = 1;
- priv->stop_hang_check = 1;
- cancel_delayed_work(&priv->reset_work);
- cancel_delayed_work(&priv->security_work);
- cancel_delayed_work(&priv->wx_event_work);
- cancel_delayed_work(&priv->hang_check);
- cancel_delayed_work(&priv->rf_kill);
- cancel_delayed_work(&priv->scan_event_later);
- destroy_workqueue(priv->workqueue);
- priv->workqueue = NULL;
- }
-}
-
-static int ipw2100_tx_allocate(struct ipw2100_priv *priv)
-{
- int i, j, err = -EINVAL;
- void *v;
- dma_addr_t p;
-
- IPW_DEBUG_INFO("enter\n");
-
- err = bd_queue_allocate(priv, &priv->tx_queue, TX_QUEUE_LENGTH);
- if (err) {
- IPW_DEBUG_ERROR("%s: failed bd_queue_allocate\n",
- priv->net_dev->name);
- return err;
- }
-
- priv->tx_buffers =
- (struct ipw2100_tx_packet *)kmalloc(TX_PENDED_QUEUE_LENGTH *
- sizeof(struct
- ipw2100_tx_packet),
- GFP_ATOMIC);
- if (!priv->tx_buffers) {
- printk(KERN_ERR DRV_NAME
- ": %s: alloc failed form tx buffers.\n",
- priv->net_dev->name);
- bd_queue_free(priv, &priv->tx_queue);
- return -ENOMEM;
- }
-
- for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) {
- v = pci_alloc_consistent(priv->pci_dev,
- sizeof(struct ipw2100_data_header),
- &p);
- if (!v) {
- printk(KERN_ERR DRV_NAME
- ": %s: PCI alloc failed for tx " "buffers.\n",
- priv->net_dev->name);
- err = -ENOMEM;
- break;
- }
-
- priv->tx_buffers[i].type = DATA;
- priv->tx_buffers[i].info.d_struct.data =
- (struct ipw2100_data_header *)v;
- priv->tx_buffers[i].info.d_struct.data_phys = p;
- priv->tx_buffers[i].info.d_struct.txb = NULL;
- }
-
- if (i == TX_PENDED_QUEUE_LENGTH)
- return 0;
-
- for (j = 0; j < i; j++) {
- pci_free_consistent(priv->pci_dev,
- sizeof(struct ipw2100_data_header),
- priv->tx_buffers[j].info.d_struct.data,
- priv->tx_buffers[j].info.d_struct.
- data_phys);
- }
-
- kfree(priv->tx_buffers);
- priv->tx_buffers = NULL;
-
- return err;
-}
-
-static void ipw2100_tx_initialize(struct ipw2100_priv *priv)
-{
- int i;
-
- IPW_DEBUG_INFO("enter\n");
-
- /*
- * reinitialize packet info lists
- */
- INIT_LIST_HEAD(&priv->fw_pend_list);
- INIT_STAT(&priv->fw_pend_stat);
-
- /*
- * reinitialize lists
- */
- INIT_LIST_HEAD(&priv->tx_pend_list);
- INIT_LIST_HEAD(&priv->tx_free_list);
- INIT_STAT(&priv->tx_pend_stat);
- INIT_STAT(&priv->tx_free_stat);
-
- for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) {
- /* We simply drop any SKBs that have been queued for
- * transmit */
- if (priv->tx_buffers[i].info.d_struct.txb) {
- ieee80211_txb_free(priv->tx_buffers[i].info.d_struct.
- txb);
- priv->tx_buffers[i].info.d_struct.txb = NULL;
- }
-
- list_add_tail(&priv->tx_buffers[i].list, &priv->tx_free_list);
- }
-
- SET_STAT(&priv->tx_free_stat, i);
-
- priv->tx_queue.oldest = 0;
- priv->tx_queue.available = priv->tx_queue.entries;
- priv->tx_queue.next = 0;
- INIT_STAT(&priv->txq_stat);
- SET_STAT(&priv->txq_stat, priv->tx_queue.available);
-
- bd_queue_initialize(priv, &priv->tx_queue,
- IPW_MEM_HOST_SHARED_TX_QUEUE_BD_BASE,
- IPW_MEM_HOST_SHARED_TX_QUEUE_BD_SIZE,
- IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX,
- IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX);
-
- IPW_DEBUG_INFO("exit\n");
-
-}
-
-static void ipw2100_tx_free(struct ipw2100_priv *priv)
-{
- int i;
-
- IPW_DEBUG_INFO("enter\n");
-
- bd_queue_free(priv, &priv->tx_queue);
-
- if (!priv->tx_buffers)
- return;
-
- for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) {
- if (priv->tx_buffers[i].info.d_struct.txb) {
- ieee80211_txb_free(priv->tx_buffers[i].info.d_struct.
- txb);
- priv->tx_buffers[i].info.d_struct.txb = NULL;
- }
- if (priv->tx_buffers[i].info.d_struct.data)
- pci_free_consistent(priv->pci_dev,
- sizeof(struct ipw2100_data_header),
- priv->tx_buffers[i].info.d_struct.
- data,
- priv->tx_buffers[i].info.d_struct.
- data_phys);
- }
-
- kfree(priv->tx_buffers);
- priv->tx_buffers = NULL;
-
- IPW_DEBUG_INFO("exit\n");
-}
-
-static int ipw2100_rx_allocate(struct ipw2100_priv *priv)
-{
- int i, j, err = -EINVAL;
-
- IPW_DEBUG_INFO("enter\n");
-
- err = bd_queue_allocate(priv, &priv->rx_queue, RX_QUEUE_LENGTH);
- if (err) {
- IPW_DEBUG_INFO("failed bd_queue_allocate\n");
- return err;
- }
-
- err = status_queue_allocate(priv, RX_QUEUE_LENGTH);
- if (err) {
- IPW_DEBUG_INFO("failed status_queue_allocate\n");
- bd_queue_free(priv, &priv->rx_queue);
- return err;
- }
-
- /*
- * allocate packets
- */
- priv->rx_buffers = (struct ipw2100_rx_packet *)
- kmalloc(RX_QUEUE_LENGTH * sizeof(struct ipw2100_rx_packet),
- GFP_KERNEL);
- if (!priv->rx_buffers) {
- IPW_DEBUG_INFO("can't allocate rx packet buffer table\n");
-
- bd_queue_free(priv, &priv->rx_queue);
-
- status_queue_free(priv);
-
- return -ENOMEM;
- }
-
- for (i = 0; i < RX_QUEUE_LENGTH; i++) {
- struct ipw2100_rx_packet *packet = &priv->rx_buffers[i];
-
- err = ipw2100_alloc_skb(priv, packet);
- if (unlikely(err)) {
- err = -ENOMEM;
- break;
- }
-
- /* The BD holds the cache aligned address */
- priv->rx_queue.drv[i].host_addr = packet->dma_addr;
- priv->rx_queue.drv[i].buf_length = IPW_RX_NIC_BUFFER_LENGTH;
- priv->status_queue.drv[i].status_fields = 0;
- }
-
- if (i == RX_QUEUE_LENGTH)
- return 0;
-
- for (j = 0; j < i; j++) {
- pci_unmap_single(priv->pci_dev, priv->rx_buffers[j].dma_addr,
- sizeof(struct ipw2100_rx_packet),
- PCI_DMA_FROMDEVICE);
- dev_kfree_skb(priv->rx_buffers[j].skb);
- }
-
- kfree(priv->rx_buffers);
- priv->rx_buffers = NULL;
-
- bd_queue_free(priv, &priv->rx_queue);
-
- status_queue_free(priv);
-
- return err;
-}
-
-static void ipw2100_rx_initialize(struct ipw2100_priv *priv)
-{
- IPW_DEBUG_INFO("enter\n");
-
- priv->rx_queue.oldest = 0;
- priv->rx_queue.available = priv->rx_queue.entries - 1;
- priv->rx_queue.next = priv->rx_queue.entries - 1;
-
- INIT_STAT(&priv->rxq_stat);
- SET_STAT(&priv->rxq_stat, priv->rx_queue.available);
-
- bd_queue_initialize(priv, &priv->rx_queue,
- IPW_MEM_HOST_SHARED_RX_BD_BASE,
- IPW_MEM_HOST_SHARED_RX_BD_SIZE,
- IPW_MEM_HOST_SHARED_RX_READ_INDEX,
- IPW_MEM_HOST_SHARED_RX_WRITE_INDEX);
-
- /* set up the status queue */
- write_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_STATUS_BASE,
- priv->status_queue.nic);
-
- IPW_DEBUG_INFO("exit\n");
-}
-
-static void ipw2100_rx_free(struct ipw2100_priv *priv)
-{
- int i;
-
- IPW_DEBUG_INFO("enter\n");
-
- bd_queue_free(priv, &priv->rx_queue);
- status_queue_free(priv);
-
- if (!priv->rx_buffers)
- return;
-
- for (i = 0; i < RX_QUEUE_LENGTH; i++) {
- if (priv->rx_buffers[i].rxp) {
- pci_unmap_single(priv->pci_dev,
- priv->rx_buffers[i].dma_addr,
- sizeof(struct ipw2100_rx),
- PCI_DMA_FROMDEVICE);
- dev_kfree_skb(priv->rx_buffers[i].skb);
- }
- }
-
- kfree(priv->rx_buffers);
- priv->rx_buffers = NULL;
-
- IPW_DEBUG_INFO("exit\n");
-}
-
-static int ipw2100_read_mac_address(struct ipw2100_priv *priv)
-{
- u32 length = ETH_ALEN;
- u8 addr[ETH_ALEN];
-
- int err;
-
- err = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ADAPTER_MAC, addr, &length);
- if (err) {
- IPW_DEBUG_INFO("MAC address read failed\n");
- return -EIO;
- }
-
- memcpy(priv->net_dev->dev_addr, addr, ETH_ALEN);
- IPW_DEBUG_INFO("card MAC is %pM\n", priv->net_dev->dev_addr);
-
- return 0;
-}
-
-/********************************************************************
- *
- * Firmware Commands
- *
- ********************************************************************/
-
-static int ipw2100_set_mac_address(struct ipw2100_priv *priv, int batch_mode)
-{
- struct host_command cmd = {
- .host_command = ADAPTER_ADDRESS,
- .host_command_sequence = 0,
- .host_command_length = ETH_ALEN
- };
- int err;
-
- IPW_DEBUG_HC("SET_MAC_ADDRESS\n");
-
- IPW_DEBUG_INFO("enter\n");
-
- if (priv->config & CFG_CUSTOM_MAC) {
- memcpy(cmd.host_command_parameters, priv->mac_addr, ETH_ALEN);
- memcpy(priv->net_dev->dev_addr, priv->mac_addr, ETH_ALEN);
- } else
- memcpy(cmd.host_command_parameters, priv->net_dev->dev_addr,
- ETH_ALEN);
-
- err = ipw2100_hw_send_command(priv, &cmd);
-
- IPW_DEBUG_INFO("exit\n");
- return err;
-}
-
-static int ipw2100_set_port_type(struct ipw2100_priv *priv, u32 port_type,
- int batch_mode)
-{
- struct host_command cmd = {
- .host_command = PORT_TYPE,
- .host_command_sequence = 0,
- .host_command_length = sizeof(u32)
- };
- int err;
-
- switch (port_type) {
- case IW_MODE_INFRA:
- cmd.host_command_parameters[0] = IPW_BSS;
- break;
- case IW_MODE_ADHOC:
- cmd.host_command_parameters[0] = IPW_IBSS;
- break;
- }
-
- IPW_DEBUG_HC("PORT_TYPE: %s\n",
- port_type == IPW_IBSS ? "Ad-Hoc" : "Managed");
-
- if (!batch_mode) {
- err = ipw2100_disable_adapter(priv);
- if (err) {
- printk(KERN_ERR DRV_NAME
- ": %s: Could not disable adapter %d\n",
- priv->net_dev->name, err);
- return err;
- }
- }
-
- /* send cmd to firmware */
- err = ipw2100_hw_send_command(priv, &cmd);
-
- if (!batch_mode)
- ipw2100_enable_adapter(priv);
-
- return err;
-}
-
-static int ipw2100_set_channel(struct ipw2100_priv *priv, u32 channel,
- int batch_mode)
-{
- struct host_command cmd = {
- .host_command = CHANNEL,
- .host_command_sequence = 0,
- .host_command_length = sizeof(u32)
- };
- int err;
-
- cmd.host_command_parameters[0] = channel;
-
- IPW_DEBUG_HC("CHANNEL: %d\n", channel);
-
- /* If BSS then we don't support channel selection */
- if (priv->ieee->iw_mode == IW_MODE_INFRA)
- return 0;
-
- if ((channel != 0) &&
- ((channel < REG_MIN_CHANNEL) || (channel > REG_MAX_CHANNEL)))
- return -EINVAL;
-
- if (!batch_mode) {
- err = ipw2100_disable_adapter(priv);
- if (err)
- return err;
- }
-
- err = ipw2100_hw_send_command(priv, &cmd);
- if (err) {
- IPW_DEBUG_INFO("Failed to set channel to %d", channel);
- return err;
- }
-
- if (channel)
- priv->config |= CFG_STATIC_CHANNEL;
- else
- priv->config &= ~CFG_STATIC_CHANNEL;
-
- priv->channel = channel;
-
- if (!batch_mode) {
- err = ipw2100_enable_adapter(priv);
- if (err)
- return err;
- }
-
- return 0;
-}
-
-static int ipw2100_system_config(struct ipw2100_priv *priv, int batch_mode)
-{
- struct host_command cmd = {
- .host_command = SYSTEM_CONFIG,
- .host_command_sequence = 0,
- .host_command_length = 12,
- };
- u32 ibss_mask, len = sizeof(u32);
- int err;
-
- /* Set system configuration */
-
- if (!batch_mode) {
- err = ipw2100_disable_adapter(priv);
- if (err)
- return err;
- }
-
- if (priv->ieee->iw_mode == IW_MODE_ADHOC)
- cmd.host_command_parameters[0] |= IPW_CFG_IBSS_AUTO_START;
-
- cmd.host_command_parameters[0] |= IPW_CFG_IBSS_MASK |
- IPW_CFG_BSS_MASK | IPW_CFG_802_1x_ENABLE;
-
- if (!(priv->config & CFG_LONG_PREAMBLE))
- cmd.host_command_parameters[0] |= IPW_CFG_PREAMBLE_AUTO;
-
- err = ipw2100_get_ordinal(priv,
- IPW_ORD_EEPROM_IBSS_11B_CHANNELS,
- &ibss_mask, &len);
- if (err)
- ibss_mask = IPW_IBSS_11B_DEFAULT_MASK;
-
- cmd.host_command_parameters[1] = REG_CHANNEL_MASK;
- cmd.host_command_parameters[2] = REG_CHANNEL_MASK & ibss_mask;
-
- /* 11b only */
- /*cmd.host_command_parameters[0] |= DIVERSITY_ANTENNA_A; */
-
- err = ipw2100_hw_send_command(priv, &cmd);
- if (err)
- return err;
-
-/* If IPv6 is configured in the kernel then we don't want to filter out all
- * of the multicast packets as IPv6 needs some. */
-#if !defined(CONFIG_IPV6) && !defined(CONFIG_IPV6_MODULE)
- cmd.host_command = ADD_MULTICAST;
- cmd.host_command_sequence = 0;
- cmd.host_command_length = 0;
-
- ipw2100_hw_send_command(priv, &cmd);
-#endif
- if (!batch_mode) {
- err = ipw2100_enable_adapter(priv);
- if (err)
- return err;
- }
-
- return 0;
-}
-
-static int ipw2100_set_tx_rates(struct ipw2100_priv *priv, u32 rate,
- int batch_mode)
-{
- struct host_command cmd = {
- .host_command = BASIC_TX_RATES,
- .host_command_sequence = 0,
- .host_command_length = 4
- };
- int err;
-
- cmd.host_command_parameters[0] = rate & TX_RATE_MASK;
-
- if (!batch_mode) {
- err = ipw2100_disable_adapter(priv);
- if (err)
- return err;
- }
-
- /* Set BASIC TX Rate first */
- ipw2100_hw_send_command(priv, &cmd);
-
- /* Set TX Rate */
- cmd.host_command = TX_RATES;
- ipw2100_hw_send_command(priv, &cmd);
-
- /* Set MSDU TX Rate */
- cmd.host_command = MSDU_TX_RATES;
- ipw2100_hw_send_command(priv, &cmd);
-
- if (!batch_mode) {
- err = ipw2100_enable_adapter(priv);
- if (err)
- return err;
- }
-
- priv->tx_rates = rate;
-
- return 0;
-}
-
-static int ipw2100_set_power_mode(struct ipw2100_priv *priv, int power_level)
-{
- struct host_command cmd = {
- .host_command = POWER_MODE,
- .host_command_sequence = 0,
- .host_command_length = 4
- };
- int err;
-
- cmd.host_command_parameters[0] = power_level;
-
- err = ipw2100_hw_send_command(priv, &cmd);
- if (err)
- return err;
-
- if (power_level == IPW_POWER_MODE_CAM)
- priv->power_mode = IPW_POWER_LEVEL(priv->power_mode);
- else
- priv->power_mode = IPW_POWER_ENABLED | power_level;
-
-#ifdef IPW2100_TX_POWER
- if (priv->port_type == IBSS && priv->adhoc_power != DFTL_IBSS_TX_POWER) {
- /* Set beacon interval */
- cmd.host_command = TX_POWER_INDEX;
- cmd.host_command_parameters[0] = (u32) priv->adhoc_power;
-
- err = ipw2100_hw_send_command(priv, &cmd);
- if (err)
- return err;
- }
-#endif
-
- return 0;
-}
-
-static int ipw2100_set_rts_threshold(struct ipw2100_priv *priv, u32 threshold)
-{
- struct host_command cmd = {
- .host_command = RTS_THRESHOLD,
- .host_command_sequence = 0,
- .host_command_length = 4
- };
- int err;
-
- if (threshold & RTS_DISABLED)
- cmd.host_command_parameters[0] = MAX_RTS_THRESHOLD;
- else
- cmd.host_command_parameters[0] = threshold & ~RTS_DISABLED;
-
- err = ipw2100_hw_send_command(priv, &cmd);
- if (err)
- return err;
-
- priv->rts_threshold = threshold;
-
- return 0;
-}
-
-#if 0
-int ipw2100_set_fragmentation_threshold(struct ipw2100_priv *priv,
- u32 threshold, int batch_mode)
-{
- struct host_command cmd = {
- .host_command = FRAG_THRESHOLD,
- .host_command_sequence = 0,
- .host_command_length = 4,
- .host_command_parameters[0] = 0,
- };
- int err;
-
- if (!batch_mode) {
- err = ipw2100_disable_adapter(priv);
- if (err)
- return err;
- }
-
- if (threshold == 0)
- threshold = DEFAULT_FRAG_THRESHOLD;
- else {
- threshold = max(threshold, MIN_FRAG_THRESHOLD);
- threshold = min(threshold, MAX_FRAG_THRESHOLD);
- }
-
- cmd.host_command_parameters[0] = threshold;
-
- IPW_DEBUG_HC("FRAG_THRESHOLD: %u\n", threshold);
-
- err = ipw2100_hw_send_command(priv, &cmd);
-
- if (!batch_mode)
- ipw2100_enable_adapter(priv);
-
- if (!err)
- priv->frag_threshold = threshold;
-
- return err;
-}
-#endif
-
-static int ipw2100_set_short_retry(struct ipw2100_priv *priv, u32 retry)
-{
- struct host_command cmd = {
- .host_command = SHORT_RETRY_LIMIT,
- .host_command_sequence = 0,
- .host_command_length = 4
- };
- int err;
-
- cmd.host_command_parameters[0] = retry;
-
- err = ipw2100_hw_send_command(priv, &cmd);
- if (err)
- return err;
-
- priv->short_retry_limit = retry;
-
- return 0;
-}
-
-static int ipw2100_set_long_retry(struct ipw2100_priv *priv, u32 retry)
-{
- struct host_command cmd = {
- .host_command = LONG_RETRY_LIMIT,
- .host_command_sequence = 0,
- .host_command_length = 4
- };
- int err;
-
- cmd.host_command_parameters[0] = retry;
-
- err = ipw2100_hw_send_command(priv, &cmd);
- if (err)
- return err;
-
- priv->long_retry_limit = retry;
-
- return 0;
-}
-
-static int ipw2100_set_mandatory_bssid(struct ipw2100_priv *priv, u8 * bssid,
- int batch_mode)
-{
- struct host_command cmd = {
- .host_command = MANDATORY_BSSID,
- .host_command_sequence = 0,
- .host_command_length = (bssid == NULL) ? 0 : ETH_ALEN
- };
- int err;
-
-#ifdef CONFIG_IPW2100_DEBUG
- if (bssid != NULL)
- IPW_DEBUG_HC("MANDATORY_BSSID: %pM\n", bssid);
- else
- IPW_DEBUG_HC("MANDATORY_BSSID: <clear>\n");
-#endif
- /* if BSSID is empty then we disable mandatory bssid mode */
- if (bssid != NULL)
- memcpy(cmd.host_command_parameters, bssid, ETH_ALEN);
-
- if (!batch_mode) {
- err = ipw2100_disable_adapter(priv);
- if (err)
- return err;
- }
-
- err = ipw2100_hw_send_command(priv, &cmd);
-
- if (!batch_mode)
- ipw2100_enable_adapter(priv);
-
- return err;
-}
-
-static int ipw2100_disassociate_bssid(struct ipw2100_priv *priv)
-{
- struct host_command cmd = {
- .host_command = DISASSOCIATION_BSSID,
- .host_command_sequence = 0,
- .host_command_length = ETH_ALEN
- };
- int err;
- int len;
-
- IPW_DEBUG_HC("DISASSOCIATION_BSSID\n");
-
- len = ETH_ALEN;
- /* The Firmware currently ignores the BSSID and just disassociates from
- * the currently associated AP -- but in the off chance that a future
- * firmware does use the BSSID provided here, we go ahead and try and
- * set it to the currently associated AP's BSSID */
- memcpy(cmd.host_command_parameters, priv->bssid, ETH_ALEN);
-
- err = ipw2100_hw_send_command(priv, &cmd);
-
- return err;
-}
-
-static int ipw2100_set_wpa_ie(struct ipw2100_priv *,
- struct ipw2100_wpa_assoc_frame *, int)
- __attribute__ ((unused));
-
-static int ipw2100_set_wpa_ie(struct ipw2100_priv *priv,
- struct ipw2100_wpa_assoc_frame *wpa_frame,
- int batch_mode)
-{
- struct host_command cmd = {
- .host_command = SET_WPA_IE,
- .host_command_sequence = 0,
- .host_command_length = sizeof(struct ipw2100_wpa_assoc_frame),
- };
- int err;
-
- IPW_DEBUG_HC("SET_WPA_IE\n");
-
- if (!batch_mode) {
- err = ipw2100_disable_adapter(priv);
- if (err)
- return err;
- }
-
- memcpy(cmd.host_command_parameters, wpa_frame,
- sizeof(struct ipw2100_wpa_assoc_frame));
-
- err = ipw2100_hw_send_command(priv, &cmd);
-
- if (!batch_mode) {
- if (ipw2100_enable_adapter(priv))
- err = -EIO;
- }
-
- return err;
-}
-
-struct security_info_params {
- u32 allowed_ciphers;
- u16 version;
- u8 auth_mode;
- u8 replay_counters_number;
- u8 unicast_using_group;
-} __attribute__ ((packed));
-
-static int ipw2100_set_security_information(struct ipw2100_priv *priv,
- int auth_mode,
- int security_level,
- int unicast_using_group,
- int batch_mode)
-{
- struct host_command cmd = {
- .host_command = SET_SECURITY_INFORMATION,
- .host_command_sequence = 0,
- .host_command_length = sizeof(struct security_info_params)
- };
- struct security_info_params *security =
- (struct security_info_params *)&cmd.host_command_parameters;
- int err;
- memset(security, 0, sizeof(*security));
-
- /* If shared key AP authentication is turned on, then we need to
- * configure the firmware to try and use it.
- *
- * Actual data encryption/decryption is handled by the host. */
- security->auth_mode = auth_mode;
- security->unicast_using_group = unicast_using_group;
-
- switch (security_level) {
- default:
- case SEC_LEVEL_0:
- security->allowed_ciphers = IPW_NONE_CIPHER;
- break;
- case SEC_LEVEL_1:
- security->allowed_ciphers = IPW_WEP40_CIPHER |
- IPW_WEP104_CIPHER;
- break;
- case SEC_LEVEL_2:
- security->allowed_ciphers = IPW_WEP40_CIPHER |
- IPW_WEP104_CIPHER | IPW_TKIP_CIPHER;
- break;
- case SEC_LEVEL_2_CKIP:
- security->allowed_ciphers = IPW_WEP40_CIPHER |
- IPW_WEP104_CIPHER | IPW_CKIP_CIPHER;
- break;
- case SEC_LEVEL_3:
- security->allowed_ciphers = IPW_WEP40_CIPHER |
- IPW_WEP104_CIPHER | IPW_TKIP_CIPHER | IPW_CCMP_CIPHER;
- break;
- }
-
- IPW_DEBUG_HC
- ("SET_SECURITY_INFORMATION: auth:%d cipher:0x%02X (level %d)\n",
- security->auth_mode, security->allowed_ciphers, security_level);
-
- security->replay_counters_number = 0;
-
- if (!batch_mode) {
- err = ipw2100_disable_adapter(priv);
- if (err)
- return err;
- }
-
- err = ipw2100_hw_send_command(priv, &cmd);
-
- if (!batch_mode)
- ipw2100_enable_adapter(priv);
-
- return err;
-}
-
-static int ipw2100_set_tx_power(struct ipw2100_priv *priv, u32 tx_power)
-{
- struct host_command cmd = {
- .host_command = TX_POWER_INDEX,
- .host_command_sequence = 0,
- .host_command_length = 4
- };
- int err = 0;
- u32 tmp = tx_power;
-
- if (tx_power != IPW_TX_POWER_DEFAULT)
- tmp = (tx_power - IPW_TX_POWER_MIN_DBM) * 16 /
- (IPW_TX_POWER_MAX_DBM - IPW_TX_POWER_MIN_DBM);
-
- cmd.host_command_parameters[0] = tmp;
-
- if (priv->ieee->iw_mode == IW_MODE_ADHOC)
- err = ipw2100_hw_send_command(priv, &cmd);
- if (!err)
- priv->tx_power = tx_power;
-
- return 0;
-}
-
-static int ipw2100_set_ibss_beacon_interval(struct ipw2100_priv *priv,
- u32 interval, int batch_mode)
-{
- struct host_command cmd = {
- .host_command = BEACON_INTERVAL,
- .host_command_sequence = 0,
- .host_command_length = 4
- };
- int err;
-
- cmd.host_command_parameters[0] = interval;
-
- IPW_DEBUG_INFO("enter\n");
-
- if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
- if (!batch_mode) {
- err = ipw2100_disable_adapter(priv);
- if (err)
- return err;
- }
-
- ipw2100_hw_send_command(priv, &cmd);
-
- if (!batch_mode) {
- err = ipw2100_enable_adapter(priv);
- if (err)
- return err;
- }
- }
-
- IPW_DEBUG_INFO("exit\n");
-
- return 0;
-}
-
-void ipw2100_queues_initialize(struct ipw2100_priv *priv)
-{
- ipw2100_tx_initialize(priv);
- ipw2100_rx_initialize(priv);
- ipw2100_msg_initialize(priv);
-}
-
-void ipw2100_queues_free(struct ipw2100_priv *priv)
-{
- ipw2100_tx_free(priv);
- ipw2100_rx_free(priv);
- ipw2100_msg_free(priv);
-}
-
-int ipw2100_queues_allocate(struct ipw2100_priv *priv)
-{
- if (ipw2100_tx_allocate(priv) ||
- ipw2100_rx_allocate(priv) || ipw2100_msg_allocate(priv))
- goto fail;
-
- return 0;
-
- fail:
- ipw2100_tx_free(priv);
- ipw2100_rx_free(priv);
- ipw2100_msg_free(priv);
- return -ENOMEM;
-}
-
-#define IPW_PRIVACY_CAPABLE 0x0008
-
-static int ipw2100_set_wep_flags(struct ipw2100_priv *priv, u32 flags,
- int batch_mode)
-{
- struct host_command cmd = {
- .host_command = WEP_FLAGS,
- .host_command_sequence = 0,
- .host_command_length = 4
- };
- int err;
-
- cmd.host_command_parameters[0] = flags;
-
- IPW_DEBUG_HC("WEP_FLAGS: flags = 0x%08X\n", flags);
-
- if (!batch_mode) {
- err = ipw2100_disable_adapter(priv);
- if (err) {
- printk(KERN_ERR DRV_NAME
- ": %s: Could not disable adapter %d\n",
- priv->net_dev->name, err);
- return err;
- }
- }
-
- /* send cmd to firmware */
- err = ipw2100_hw_send_command(priv, &cmd);
-
- if (!batch_mode)
- ipw2100_enable_adapter(priv);
-
- return err;
-}
-
-struct ipw2100_wep_key {
- u8 idx;
- u8 len;
- u8 key[13];
-};
-
-/* Macros to ease up priting WEP keys */
-#define WEP_FMT_64 "%02X%02X%02X%02X-%02X"
-#define WEP_FMT_128 "%02X%02X%02X%02X-%02X%02X%02X%02X-%02X%02X%02X"
-#define WEP_STR_64(x) x[0],x[1],x[2],x[3],x[4]
-#define WEP_STR_128(x) x[0],x[1],x[2],x[3],x[4],x[5],x[6],x[7],x[8],x[9],x[10]
-
-/**
- * Set a the wep key
- *
- * @priv: struct to work on
- * @idx: index of the key we want to set
- * @key: ptr to the key data to set
- * @len: length of the buffer at @key
- * @batch_mode: FIXME perform the operation in batch mode, not
- * disabling the device.
- *
- * @returns 0 if OK, < 0 errno code on error.
- *
- * Fill out a command structure with the new wep key, length an
- * index and send it down the wire.
- */
-static int ipw2100_set_key(struct ipw2100_priv *priv,
- int idx, char *key, int len, int batch_mode)
-{
- int keylen = len ? (len <= 5 ? 5 : 13) : 0;
- struct host_command cmd = {
- .host_command = WEP_KEY_INFO,
- .host_command_sequence = 0,
- .host_command_length = sizeof(struct ipw2100_wep_key),
- };
- struct ipw2100_wep_key *wep_key = (void *)cmd.host_command_parameters;
- int err;
-
- IPW_DEBUG_HC("WEP_KEY_INFO: index = %d, len = %d/%d\n",
- idx, keylen, len);
-
- /* NOTE: We don't check cached values in case the firmware was reset
- * or some other problem is occurring. If the user is setting the key,
- * then we push the change */
-
- wep_key->idx = idx;
- wep_key->len = keylen;
-
- if (keylen) {
- memcpy(wep_key->key, key, len);
- memset(wep_key->key + len, 0, keylen - len);
- }
-
- /* Will be optimized out on debug not being configured in */
- if (keylen == 0)
- IPW_DEBUG_WEP("%s: Clearing key %d\n",
- priv->net_dev->name, wep_key->idx);
- else if (keylen == 5)
- IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_64 "\n",
- priv->net_dev->name, wep_key->idx, wep_key->len,
- WEP_STR_64(wep_key->key));
- else
- IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_128
- "\n",
- priv->net_dev->name, wep_key->idx, wep_key->len,
- WEP_STR_128(wep_key->key));
-
- if (!batch_mode) {
- err = ipw2100_disable_adapter(priv);
- /* FIXME: IPG: shouldn't this prink be in _disable_adapter()? */
- if (err) {
- printk(KERN_ERR DRV_NAME
- ": %s: Could not disable adapter %d\n",
- priv->net_dev->name, err);
- return err;
- }
- }
-
- /* send cmd to firmware */
- err = ipw2100_hw_send_command(priv, &cmd);
-
- if (!batch_mode) {
- int err2 = ipw2100_enable_adapter(priv);
- if (err == 0)
- err = err2;
- }
- return err;
-}
-
-static int ipw2100_set_key_index(struct ipw2100_priv *priv,
- int idx, int batch_mode)
-{
- struct host_command cmd = {
- .host_command = WEP_KEY_INDEX,
- .host_command_sequence = 0,
- .host_command_length = 4,
- .host_command_parameters = {idx},
- };
- int err;
-
- IPW_DEBUG_HC("WEP_KEY_INDEX: index = %d\n", idx);
-
- if (idx < 0 || idx > 3)
- return -EINVAL;
-
- if (!batch_mode) {
- err = ipw2100_disable_adapter(priv);
- if (err) {
- printk(KERN_ERR DRV_NAME
- ": %s: Could not disable adapter %d\n",
- priv->net_dev->name, err);
- return err;
- }
- }
-
- /* send cmd to firmware */
- err = ipw2100_hw_send_command(priv, &cmd);
-
- if (!batch_mode)
- ipw2100_enable_adapter(priv);
-
- return err;
-}
-
-static int ipw2100_configure_security(struct ipw2100_priv *priv, int batch_mode)
-{
- int i, err, auth_mode, sec_level, use_group;
-
- if (!(priv->status & STATUS_RUNNING))
- return 0;
-
- if (!batch_mode) {
- err = ipw2100_disable_adapter(priv);
- if (err)
- return err;
- }
-
- if (!priv->ieee->sec.enabled) {
- err =
- ipw2100_set_security_information(priv, IPW_AUTH_OPEN,
- SEC_LEVEL_0, 0, 1);
- } else {
- auth_mode = IPW_AUTH_OPEN;
- if (priv->ieee->sec.flags & SEC_AUTH_MODE) {
- if (priv->ieee->sec.auth_mode == WLAN_AUTH_SHARED_KEY)
- auth_mode = IPW_AUTH_SHARED;
- else if (priv->ieee->sec.auth_mode == WLAN_AUTH_LEAP)
- auth_mode = IPW_AUTH_LEAP_CISCO_ID;
- }
-
- sec_level = SEC_LEVEL_0;
- if (priv->ieee->sec.flags & SEC_LEVEL)
- sec_level = priv->ieee->sec.level;
-
- use_group = 0;
- if (priv->ieee->sec.flags & SEC_UNICAST_GROUP)
- use_group = priv->ieee->sec.unicast_uses_group;
-
- err =
- ipw2100_set_security_information(priv, auth_mode, sec_level,
- use_group, 1);
- }
-
- if (err)
- goto exit;
-
- if (priv->ieee->sec.enabled) {
- for (i = 0; i < 4; i++) {
- if (!(priv->ieee->sec.flags & (1 << i))) {
- memset(priv->ieee->sec.keys[i], 0, WEP_KEY_LEN);
- priv->ieee->sec.key_sizes[i] = 0;
- } else {
- err = ipw2100_set_key(priv, i,
- priv->ieee->sec.keys[i],
- priv->ieee->sec.
- key_sizes[i], 1);
- if (err)
- goto exit;
- }
- }
-
- ipw2100_set_key_index(priv, priv->ieee->crypt_info.tx_keyidx, 1);
- }
-
- /* Always enable privacy so the Host can filter WEP packets if
- * encrypted data is sent up */
- err =
- ipw2100_set_wep_flags(priv,
- priv->ieee->sec.
- enabled ? IPW_PRIVACY_CAPABLE : 0, 1);
- if (err)
- goto exit;
-
- priv->status &= ~STATUS_SECURITY_UPDATED;
-
- exit:
- if (!batch_mode)
- ipw2100_enable_adapter(priv);
-
- return err;
-}
-
-static void ipw2100_security_work(struct work_struct *work)
-{
- struct ipw2100_priv *priv =
- container_of(work, struct ipw2100_priv, security_work.work);
-
- /* If we happen to have reconnected before we get a chance to
- * process this, then update the security settings--which causes
- * a disassociation to occur */
- if (!(priv->status & STATUS_ASSOCIATED) &&
- priv->status & STATUS_SECURITY_UPDATED)
- ipw2100_configure_security(priv, 0);
-}
-
-static void shim__set_security(struct net_device *dev,
- struct ieee80211_security *sec)
-{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- int i, force_update = 0;
-
- mutex_lock(&priv->action_mutex);
- if (!(priv->status & STATUS_INITIALIZED))
- goto done;
-
- for (i = 0; i < 4; i++) {
- if (sec->flags & (1 << i)) {
- priv->ieee->sec.key_sizes[i] = sec->key_sizes[i];
- if (sec->key_sizes[i] == 0)
- priv->ieee->sec.flags &= ~(1 << i);
- else
- memcpy(priv->ieee->sec.keys[i], sec->keys[i],
- sec->key_sizes[i]);
- if (sec->level == SEC_LEVEL_1) {
- priv->ieee->sec.flags |= (1 << i);
- priv->status |= STATUS_SECURITY_UPDATED;
- } else
- priv->ieee->sec.flags &= ~(1 << i);
- }
- }
-
- if ((sec->flags & SEC_ACTIVE_KEY) &&
- priv->ieee->sec.active_key != sec->active_key) {
- if (sec->active_key <= 3) {
- priv->ieee->sec.active_key = sec->active_key;
- priv->ieee->sec.flags |= SEC_ACTIVE_KEY;
- } else
- priv->ieee->sec.flags &= ~SEC_ACTIVE_KEY;
-
- priv->status |= STATUS_SECURITY_UPDATED;
- }
-
- if ((sec->flags & SEC_AUTH_MODE) &&
- (priv->ieee->sec.auth_mode != sec->auth_mode)) {
- priv->ieee->sec.auth_mode = sec->auth_mode;
- priv->ieee->sec.flags |= SEC_AUTH_MODE;
- priv->status |= STATUS_SECURITY_UPDATED;
- }
-
- if (sec->flags & SEC_ENABLED && priv->ieee->sec.enabled != sec->enabled) {
- priv->ieee->sec.flags |= SEC_ENABLED;
- priv->ieee->sec.enabled = sec->enabled;
- priv->status |= STATUS_SECURITY_UPDATED;
- force_update = 1;
- }
-
- if (sec->flags & SEC_ENCRYPT)
- priv->ieee->sec.encrypt = sec->encrypt;
-
- if (sec->flags & SEC_LEVEL && priv->ieee->sec.level != sec->level) {
- priv->ieee->sec.level = sec->level;
- priv->ieee->sec.flags |= SEC_LEVEL;
- priv->status |= STATUS_SECURITY_UPDATED;
- }
-
- IPW_DEBUG_WEP("Security flags: %c %c%c%c%c %c%c%c%c\n",
- priv->ieee->sec.flags & (1 << 8) ? '1' : '0',
- priv->ieee->sec.flags & (1 << 7) ? '1' : '0',
- priv->ieee->sec.flags & (1 << 6) ? '1' : '0',
- priv->ieee->sec.flags & (1 << 5) ? '1' : '0',
- priv->ieee->sec.flags & (1 << 4) ? '1' : '0',
- priv->ieee->sec.flags & (1 << 3) ? '1' : '0',
- priv->ieee->sec.flags & (1 << 2) ? '1' : '0',
- priv->ieee->sec.flags & (1 << 1) ? '1' : '0',
- priv->ieee->sec.flags & (1 << 0) ? '1' : '0');
-
-/* As a temporary work around to enable WPA until we figure out why
- * wpa_supplicant toggles the security capability of the driver, which
- * forces a disassocation with force_update...
- *
- * if (force_update || !(priv->status & STATUS_ASSOCIATED))*/
- if (!(priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING)))
- ipw2100_configure_security(priv, 0);
- done:
- mutex_unlock(&priv->action_mutex);
-}
-
-static int ipw2100_adapter_setup(struct ipw2100_priv *priv)
-{
- int err;
- int batch_mode = 1;
- u8 *bssid;
-
- IPW_DEBUG_INFO("enter\n");
-
- err = ipw2100_disable_adapter(priv);
- if (err)
- return err;
-#ifdef CONFIG_IPW2100_MONITOR
- if (priv->ieee->iw_mode == IW_MODE_MONITOR) {
- err = ipw2100_set_channel(priv, priv->channel, batch_mode);
- if (err)
- return err;
-
- IPW_DEBUG_INFO("exit\n");
-
- return 0;
- }
-#endif /* CONFIG_IPW2100_MONITOR */
-
- err = ipw2100_read_mac_address(priv);
- if (err)
- return -EIO;
-
- err = ipw2100_set_mac_address(priv, batch_mode);
- if (err)
- return err;
-
- err = ipw2100_set_port_type(priv, priv->ieee->iw_mode, batch_mode);
- if (err)
- return err;
-
- if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
- err = ipw2100_set_channel(priv, priv->channel, batch_mode);
- if (err)
- return err;
- }
-
- err = ipw2100_system_config(priv, batch_mode);
- if (err)
- return err;
-
- err = ipw2100_set_tx_rates(priv, priv->tx_rates, batch_mode);
- if (err)
- return err;
-
- /* Default to power mode OFF */
- err = ipw2100_set_power_mode(priv, IPW_POWER_MODE_CAM);
- if (err)
- return err;
-
- err = ipw2100_set_rts_threshold(priv, priv->rts_threshold);
- if (err)
- return err;
-
- if (priv->config & CFG_STATIC_BSSID)
- bssid = priv->bssid;
- else
- bssid = NULL;
- err = ipw2100_set_mandatory_bssid(priv, bssid, batch_mode);
- if (err)
- return err;
-
- if (priv->config & CFG_STATIC_ESSID)
- err = ipw2100_set_essid(priv, priv->essid, priv->essid_len,
- batch_mode);
- else
- err = ipw2100_set_essid(priv, NULL, 0, batch_mode);
- if (err)
- return err;
-
- err = ipw2100_configure_security(priv, batch_mode);
- if (err)
- return err;
-
- if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
- err =
- ipw2100_set_ibss_beacon_interval(priv,
- priv->beacon_interval,
- batch_mode);
- if (err)
- return err;
-
- err = ipw2100_set_tx_power(priv, priv->tx_power);
- if (err)
- return err;
- }
-
- /*
- err = ipw2100_set_fragmentation_threshold(
- priv, priv->frag_threshold, batch_mode);
- if (err)
- return err;
- */
-
- IPW_DEBUG_INFO("exit\n");
-
- return 0;
-}
-
-/*************************************************************************
- *
- * EXTERNALLY CALLED METHODS
- *
- *************************************************************************/
-
-/* This method is called by the network layer -- not to be confused with
- * ipw2100_set_mac_address() declared above called by this driver (and this
- * method as well) to talk to the firmware */
-static int ipw2100_set_address(struct net_device *dev, void *p)
-{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- struct sockaddr *addr = p;
- int err = 0;
-
- if (!is_valid_ether_addr(addr->sa_data))
- return -EADDRNOTAVAIL;
-
- mutex_lock(&priv->action_mutex);
-
- priv->config |= CFG_CUSTOM_MAC;
- memcpy(priv->mac_addr, addr->sa_data, ETH_ALEN);
-
- err = ipw2100_set_mac_address(priv, 0);
- if (err)
- goto done;
-
- priv->reset_backoff = 0;
- mutex_unlock(&priv->action_mutex);
- ipw2100_reset_adapter(&priv->reset_work.work);
- return 0;
-
- done:
- mutex_unlock(&priv->action_mutex);
- return err;
-}
-
-static int ipw2100_open(struct net_device *dev)
-{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- unsigned long flags;
- IPW_DEBUG_INFO("dev->open\n");
-
- spin_lock_irqsave(&priv->low_lock, flags);
- if (priv->status & STATUS_ASSOCIATED) {
- netif_carrier_on(dev);
- netif_start_queue(dev);
- }
- spin_unlock_irqrestore(&priv->low_lock, flags);
-
- return 0;
-}
-
-static int ipw2100_close(struct net_device *dev)
-{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- unsigned long flags;
- struct list_head *element;
- struct ipw2100_tx_packet *packet;
-
- IPW_DEBUG_INFO("enter\n");
-
- spin_lock_irqsave(&priv->low_lock, flags);
-
- if (priv->status & STATUS_ASSOCIATED)
- netif_carrier_off(dev);
- netif_stop_queue(dev);
-
- /* Flush the TX queue ... */
- while (!list_empty(&priv->tx_pend_list)) {
- element = priv->tx_pend_list.next;
- packet = list_entry(element, struct ipw2100_tx_packet, list);
-
- list_del(element);
- DEC_STAT(&priv->tx_pend_stat);
-
- ieee80211_txb_free(packet->info.d_struct.txb);
- packet->info.d_struct.txb = NULL;
-
- list_add_tail(element, &priv->tx_free_list);
- INC_STAT(&priv->tx_free_stat);
- }
- spin_unlock_irqrestore(&priv->low_lock, flags);
-
- IPW_DEBUG_INFO("exit\n");
-
- return 0;
-}
-
-/*
- * TODO: Fix this function... its just wrong
- */
-static void ipw2100_tx_timeout(struct net_device *dev)
-{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
-
- priv->ieee->stats.tx_errors++;
-
-#ifdef CONFIG_IPW2100_MONITOR
- if (priv->ieee->iw_mode == IW_MODE_MONITOR)
- return;
-#endif
-
- IPW_DEBUG_INFO("%s: TX timed out. Scheduling firmware restart.\n",
- dev->name);
- schedule_reset(priv);
-}
-
-static int ipw2100_wpa_enable(struct ipw2100_priv *priv, int value)
-{
- /* This is called when wpa_supplicant loads and closes the driver
- * interface. */
- priv->ieee->wpa_enabled = value;
- return 0;
-}
-
-static int ipw2100_wpa_set_auth_algs(struct ipw2100_priv *priv, int value)
-{
-
- struct ieee80211_device *ieee = priv->ieee;
- struct ieee80211_security sec = {
- .flags = SEC_AUTH_MODE,
- };
- int ret = 0;
-
- if (value & IW_AUTH_ALG_SHARED_KEY) {
- sec.auth_mode = WLAN_AUTH_SHARED_KEY;
- ieee->open_wep = 0;
- } else if (value & IW_AUTH_ALG_OPEN_SYSTEM) {
- sec.auth_mode = WLAN_AUTH_OPEN;
- ieee->open_wep = 1;
- } else if (value & IW_AUTH_ALG_LEAP) {
- sec.auth_mode = WLAN_AUTH_LEAP;
- ieee->open_wep = 1;
- } else
- return -EINVAL;
-
- if (ieee->set_security)
- ieee->set_security(ieee->dev, &sec);
- else
- ret = -EOPNOTSUPP;
-
- return ret;
-}
-
-static void ipw2100_wpa_assoc_frame(struct ipw2100_priv *priv,
- char *wpa_ie, int wpa_ie_len)
-{
-
- struct ipw2100_wpa_assoc_frame frame;
-
- frame.fixed_ie_mask = 0;
-
- /* copy WPA IE */
- memcpy(frame.var_ie, wpa_ie, wpa_ie_len);
- frame.var_ie_len = wpa_ie_len;
-
- /* make sure WPA is enabled */
- ipw2100_wpa_enable(priv, 1);
- ipw2100_set_wpa_ie(priv, &frame, 0);
-}
-
-static void ipw_ethtool_get_drvinfo(struct net_device *dev,
- struct ethtool_drvinfo *info)
-{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- char fw_ver[64], ucode_ver[64];
-
- strcpy(info->driver, DRV_NAME);
- strcpy(info->version, DRV_VERSION);
-
- ipw2100_get_fwversion(priv, fw_ver, sizeof(fw_ver));
- ipw2100_get_ucodeversion(priv, ucode_ver, sizeof(ucode_ver));
-
- snprintf(info->fw_version, sizeof(info->fw_version), "%s:%d:%s",
- fw_ver, priv->eeprom_version, ucode_ver);
-
- strcpy(info->bus_info, pci_name(priv->pci_dev));
-}
-
-static u32 ipw2100_ethtool_get_link(struct net_device *dev)
-{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- return (priv->status & STATUS_ASSOCIATED) ? 1 : 0;
-}
-
-static const struct ethtool_ops ipw2100_ethtool_ops = {
- .get_link = ipw2100_ethtool_get_link,
- .get_drvinfo = ipw_ethtool_get_drvinfo,
-};
-
-static void ipw2100_hang_check(struct work_struct *work)
-{
- struct ipw2100_priv *priv =
- container_of(work, struct ipw2100_priv, hang_check.work);
- unsigned long flags;
- u32 rtc = 0xa5a5a5a5;
- u32 len = sizeof(rtc);
- int restart = 0;
-
- spin_lock_irqsave(&priv->low_lock, flags);
-
- if (priv->fatal_error != 0) {
- /* If fatal_error is set then we need to restart */
- IPW_DEBUG_INFO("%s: Hardware fatal error detected.\n",
- priv->net_dev->name);
-
- restart = 1;
- } else if (ipw2100_get_ordinal(priv, IPW_ORD_RTC_TIME, &rtc, &len) ||
- (rtc == priv->last_rtc)) {
- /* Check if firmware is hung */
- IPW_DEBUG_INFO("%s: Firmware RTC stalled.\n",
- priv->net_dev->name);
-
- restart = 1;
- }
-
- if (restart) {
- /* Kill timer */
- priv->stop_hang_check = 1;
- priv->hangs++;
-
- /* Restart the NIC */
- schedule_reset(priv);
- }
-
- priv->last_rtc = rtc;
-
- if (!priv->stop_hang_check)
- queue_delayed_work(priv->workqueue, &priv->hang_check, HZ / 2);
-
- spin_unlock_irqrestore(&priv->low_lock, flags);
-}
-
-static void ipw2100_rf_kill(struct work_struct *work)
-{
- struct ipw2100_priv *priv =
- container_of(work, struct ipw2100_priv, rf_kill.work);
- unsigned long flags;
-
- spin_lock_irqsave(&priv->low_lock, flags);
-
- if (rf_kill_active(priv)) {
- IPW_DEBUG_RF_KILL("RF Kill active, rescheduling GPIO check\n");
- if (!priv->stop_rf_kill)
- queue_delayed_work(priv->workqueue, &priv->rf_kill,
- round_jiffies_relative(HZ));
- goto exit_unlock;
- }
-
- /* RF Kill is now disabled, so bring the device back up */
-
- if (!(priv->status & STATUS_RF_KILL_MASK)) {
- IPW_DEBUG_RF_KILL("HW RF Kill no longer active, restarting "
- "device\n");
- schedule_reset(priv);
- } else
- IPW_DEBUG_RF_KILL("HW RF Kill deactivated. SW RF Kill still "
- "enabled\n");
-
- exit_unlock:
- spin_unlock_irqrestore(&priv->low_lock, flags);
-}
-
-static void ipw2100_irq_tasklet(struct ipw2100_priv *priv);
-
-/* Look into using netdev destructor to shutdown ieee80211? */
-
-static struct net_device *ipw2100_alloc_device(struct pci_dev *pci_dev,
- void __iomem * base_addr,
- unsigned long mem_start,
- unsigned long mem_len)
-{
- struct ipw2100_priv *priv;
- struct net_device *dev;
-
- dev = alloc_ieee80211(sizeof(struct ipw2100_priv));
- if (!dev)
- return NULL;
- priv = ieee80211_priv(dev);
- priv->ieee = netdev_priv(dev);
- priv->pci_dev = pci_dev;
- priv->net_dev = dev;
-
- priv->ieee->hard_start_xmit = ipw2100_tx;
- priv->ieee->set_security = shim__set_security;
-
- priv->ieee->perfect_rssi = -20;
- priv->ieee->worst_rssi = -85;
-
- dev->open = ipw2100_open;
- dev->stop = ipw2100_close;
- dev->init = ipw2100_net_init;
- dev->ethtool_ops = &ipw2100_ethtool_ops;
- dev->tx_timeout = ipw2100_tx_timeout;
- dev->wireless_handlers = &ipw2100_wx_handler_def;
- priv->wireless_data.ieee80211 = priv->ieee;
- dev->wireless_data = &priv->wireless_data;
- dev->set_mac_address = ipw2100_set_address;
- dev->watchdog_timeo = 3 * HZ;
- dev->irq = 0;
-
- dev->base_addr = (unsigned long)base_addr;
- dev->mem_start = mem_start;
- dev->mem_end = dev->mem_start + mem_len - 1;
-
- /* NOTE: We don't use the wireless_handlers hook
- * in dev as the system will start throwing WX requests
- * to us before we're actually initialized and it just
- * ends up causing problems. So, we just handle
- * the WX extensions through the ipw2100_ioctl interface */
-
- /* memset() puts everything to 0, so we only have explicitly set
- * those values that need to be something else */
-
- /* If power management is turned on, default to AUTO mode */
- priv->power_mode = IPW_POWER_AUTO;
-
-#ifdef CONFIG_IPW2100_MONITOR
- priv->config |= CFG_CRC_CHECK;
-#endif
- priv->ieee->wpa_enabled = 0;
- priv->ieee->drop_unencrypted = 0;
- priv->ieee->privacy_invoked = 0;
- priv->ieee->ieee802_1x = 1;
-
- /* Set module parameters */
- switch (mode) {
- case 1:
- priv->ieee->iw_mode = IW_MODE_ADHOC;
- break;
-#ifdef CONFIG_IPW2100_MONITOR
- case 2:
- priv->ieee->iw_mode = IW_MODE_MONITOR;
- break;
-#endif
- default:
- case 0:
- priv->ieee->iw_mode = IW_MODE_INFRA;
- break;
- }
-
- if (disable == 1)
- priv->status |= STATUS_RF_KILL_SW;
-
- if (channel != 0 &&
- ((channel >= REG_MIN_CHANNEL) && (channel <= REG_MAX_CHANNEL))) {
- priv->config |= CFG_STATIC_CHANNEL;
- priv->channel = channel;
- }
-
- if (associate)
- priv->config |= CFG_ASSOCIATE;
-
- priv->beacon_interval = DEFAULT_BEACON_INTERVAL;
- priv->short_retry_limit = DEFAULT_SHORT_RETRY_LIMIT;
- priv->long_retry_limit = DEFAULT_LONG_RETRY_LIMIT;
- priv->rts_threshold = DEFAULT_RTS_THRESHOLD | RTS_DISABLED;
- priv->frag_threshold = DEFAULT_FTS | FRAG_DISABLED;
- priv->tx_power = IPW_TX_POWER_DEFAULT;
- priv->tx_rates = DEFAULT_TX_RATES;
-
- strcpy(priv->nick, "ipw2100");
-
- spin_lock_init(&priv->low_lock);
- mutex_init(&priv->action_mutex);
- mutex_init(&priv->adapter_mutex);
-
- init_waitqueue_head(&priv->wait_command_queue);
-
- netif_carrier_off(dev);
-
- INIT_LIST_HEAD(&priv->msg_free_list);
- INIT_LIST_HEAD(&priv->msg_pend_list);
- INIT_STAT(&priv->msg_free_stat);
- INIT_STAT(&priv->msg_pend_stat);
-
- INIT_LIST_HEAD(&priv->tx_free_list);
- INIT_LIST_HEAD(&priv->tx_pend_list);
- INIT_STAT(&priv->tx_free_stat);
- INIT_STAT(&priv->tx_pend_stat);
-
- INIT_LIST_HEAD(&priv->fw_pend_list);
- INIT_STAT(&priv->fw_pend_stat);
-
- priv->workqueue = create_workqueue(DRV_NAME);
-
- INIT_DELAYED_WORK(&priv->reset_work, ipw2100_reset_adapter);
- INIT_DELAYED_WORK(&priv->security_work, ipw2100_security_work);
- INIT_DELAYED_WORK(&priv->wx_event_work, ipw2100_wx_event_work);
- INIT_DELAYED_WORK(&priv->hang_check, ipw2100_hang_check);
- INIT_DELAYED_WORK(&priv->rf_kill, ipw2100_rf_kill);
- INIT_WORK(&priv->scan_event_now, ipw2100_scan_event_now);
- INIT_DELAYED_WORK(&priv->scan_event_later, ipw2100_scan_event_later);
-
- tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
- ipw2100_irq_tasklet, (unsigned long)priv);
-
- /* NOTE: We do not start the deferred work for status checks yet */
- priv->stop_rf_kill = 1;
- priv->stop_hang_check = 1;
-
- return dev;
-}
-
-static int ipw2100_pci_init_one(struct pci_dev *pci_dev,
- const struct pci_device_id *ent)
-{
- unsigned long mem_start, mem_len, mem_flags;
- void __iomem *base_addr = NULL;
- struct net_device *dev = NULL;
- struct ipw2100_priv *priv = NULL;
- int err = 0;
- int registered = 0;
- u32 val;
-
- IPW_DEBUG_INFO("enter\n");
-
- mem_start = pci_resource_start(pci_dev, 0);
- mem_len = pci_resource_len(pci_dev, 0);
- mem_flags = pci_resource_flags(pci_dev, 0);
-
- if ((mem_flags & IORESOURCE_MEM) != IORESOURCE_MEM) {
- IPW_DEBUG_INFO("weird - resource type is not memory\n");
- err = -ENODEV;
- goto fail;
- }
-
- base_addr = ioremap_nocache(mem_start, mem_len);
- if (!base_addr) {
- printk(KERN_WARNING DRV_NAME
- "Error calling ioremap_nocache.\n");
- err = -EIO;
- goto fail;
- }
-
- /* allocate and initialize our net_device */
- dev = ipw2100_alloc_device(pci_dev, base_addr, mem_start, mem_len);
- if (!dev) {
- printk(KERN_WARNING DRV_NAME
- "Error calling ipw2100_alloc_device.\n");
- err = -ENOMEM;
- goto fail;
- }
-
- /* set up PCI mappings for device */
- err = pci_enable_device(pci_dev);
- if (err) {
- printk(KERN_WARNING DRV_NAME
- "Error calling pci_enable_device.\n");
- return err;
- }
-
- priv = ieee80211_priv(dev);
-
- pci_set_master(pci_dev);
- pci_set_drvdata(pci_dev, priv);
-
- err = pci_set_dma_mask(pci_dev, DMA_32BIT_MASK);
- if (err) {
- printk(KERN_WARNING DRV_NAME
- "Error calling pci_set_dma_mask.\n");
- pci_disable_device(pci_dev);
- return err;
- }
-
- err = pci_request_regions(pci_dev, DRV_NAME);
- if (err) {
- printk(KERN_WARNING DRV_NAME
- "Error calling pci_request_regions.\n");
- pci_disable_device(pci_dev);
- return err;
- }
-
- /* We disable the RETRY_TIMEOUT register (0x41) to keep
- * PCI Tx retries from interfering with C3 CPU state */
- pci_read_config_dword(pci_dev, 0x40, &val);
- if ((val & 0x0000ff00) != 0)
- pci_write_config_dword(pci_dev, 0x40, val & 0xffff00ff);
-
- pci_set_power_state(pci_dev, PCI_D0);
-
- if (!ipw2100_hw_is_adapter_in_system(dev)) {
- printk(KERN_WARNING DRV_NAME
- "Device not found via register read.\n");
- err = -ENODEV;
- goto fail;
- }
-
- SET_NETDEV_DEV(dev, &pci_dev->dev);
-
- /* Force interrupts to be shut off on the device */
- priv->status |= STATUS_INT_ENABLED;
- ipw2100_disable_interrupts(priv);
-
- /* Allocate and initialize the Tx/Rx queues and lists */
- if (ipw2100_queues_allocate(priv)) {
- printk(KERN_WARNING DRV_NAME
- "Error calling ipw2100_queues_allocate.\n");
- err = -ENOMEM;
- goto fail;
- }
- ipw2100_queues_initialize(priv);
-
- err = request_irq(pci_dev->irq,
- ipw2100_interrupt, IRQF_SHARED, dev->name, priv);
- if (err) {
- printk(KERN_WARNING DRV_NAME
- "Error calling request_irq: %d.\n", pci_dev->irq);
- goto fail;
- }
- dev->irq = pci_dev->irq;
-
- IPW_DEBUG_INFO("Attempting to register device...\n");
-
- printk(KERN_INFO DRV_NAME
- ": Detected Intel PRO/Wireless 2100 Network Connection\n");
-
- /* Bring up the interface. Pre 0.46, after we registered the
- * network device we would call ipw2100_up. This introduced a race
- * condition with newer hotplug configurations (network was coming
- * up and making calls before the device was initialized).
- *
- * If we called ipw2100_up before we registered the device, then the
- * device name wasn't registered. So, we instead use the net_dev->init
- * member to call a function that then just turns and calls ipw2100_up.
- * net_dev->init is called after name allocation but before the
- * notifier chain is called */
- err = register_netdev(dev);
- if (err) {
- printk(KERN_WARNING DRV_NAME
- "Error calling register_netdev.\n");
- goto fail;
- }
-
- mutex_lock(&priv->action_mutex);
- registered = 1;
-
- IPW_DEBUG_INFO("%s: Bound to %s\n", dev->name, pci_name(pci_dev));
-
- /* perform this after register_netdev so that dev->name is set */
- err = sysfs_create_group(&pci_dev->dev.kobj, &ipw2100_attribute_group);
- if (err)
- goto fail_unlock;
-
- /* If the RF Kill switch is disabled, go ahead and complete the
- * startup sequence */
- if (!(priv->status & STATUS_RF_KILL_MASK)) {
- /* Enable the adapter - sends HOST_COMPLETE */
- if (ipw2100_enable_adapter(priv)) {
- printk(KERN_WARNING DRV_NAME
- ": %s: failed in call to enable adapter.\n",
- priv->net_dev->name);
- ipw2100_hw_stop_adapter(priv);
- err = -EIO;
- goto fail_unlock;
- }
-
- /* Start a scan . . . */
- ipw2100_set_scan_options(priv);
- ipw2100_start_scan(priv);
- }
-
- IPW_DEBUG_INFO("exit\n");
-
- priv->status |= STATUS_INITIALIZED;
-
- mutex_unlock(&priv->action_mutex);
-
- return 0;
-
- fail_unlock:
- mutex_unlock(&priv->action_mutex);
-
- fail:
- if (dev) {
- if (registered)
- unregister_netdev(dev);
-
- ipw2100_hw_stop_adapter(priv);
-
- ipw2100_disable_interrupts(priv);
-
- if (dev->irq)
- free_irq(dev->irq, priv);
-
- ipw2100_kill_workqueue(priv);
-
- /* These are safe to call even if they weren't allocated */
- ipw2100_queues_free(priv);
- sysfs_remove_group(&pci_dev->dev.kobj,
- &ipw2100_attribute_group);
-
- free_ieee80211(dev);
- pci_set_drvdata(pci_dev, NULL);
- }
-
- if (base_addr)
- iounmap(base_addr);
-
- pci_release_regions(pci_dev);
- pci_disable_device(pci_dev);
-
- return err;
-}
-
-static void __devexit ipw2100_pci_remove_one(struct pci_dev *pci_dev)
-{
- struct ipw2100_priv *priv = pci_get_drvdata(pci_dev);
- struct net_device *dev;
-
- if (priv) {
- mutex_lock(&priv->action_mutex);
-
- priv->status &= ~STATUS_INITIALIZED;
-
- dev = priv->net_dev;
- sysfs_remove_group(&pci_dev->dev.kobj,
- &ipw2100_attribute_group);
-
-#ifdef CONFIG_PM
- if (ipw2100_firmware.version)
- ipw2100_release_firmware(priv, &ipw2100_firmware);
-#endif
- /* Take down the hardware */
- ipw2100_down(priv);
-
- /* Release the mutex so that the network subsystem can
- * complete any needed calls into the driver... */
- mutex_unlock(&priv->action_mutex);
-
- /* Unregister the device first - this results in close()
- * being called if the device is open. If we free storage
- * first, then close() will crash. */
- unregister_netdev(dev);
-
- /* ipw2100_down will ensure that there is no more pending work
- * in the workqueue's, so we can safely remove them now. */
- ipw2100_kill_workqueue(priv);
-
- ipw2100_queues_free(priv);
-
- /* Free potential debugging firmware snapshot */
- ipw2100_snapshot_free(priv);
-
- if (dev->irq)
- free_irq(dev->irq, priv);
-
- if (dev->base_addr)
- iounmap((void __iomem *)dev->base_addr);
-
- free_ieee80211(dev);
- }
-
- pci_release_regions(pci_dev);
- pci_disable_device(pci_dev);
-
- IPW_DEBUG_INFO("exit\n");
-}
-
-#ifdef CONFIG_PM
-static int ipw2100_suspend(struct pci_dev *pci_dev, pm_message_t state)
-{
- struct ipw2100_priv *priv = pci_get_drvdata(pci_dev);
- struct net_device *dev = priv->net_dev;
-
- IPW_DEBUG_INFO("%s: Going into suspend...\n", dev->name);
-
- mutex_lock(&priv->action_mutex);
- if (priv->status & STATUS_INITIALIZED) {
- /* Take down the device; powers it off, etc. */
- ipw2100_down(priv);
- }
-
- /* Remove the PRESENT state of the device */
- netif_device_detach(dev);
-
- pci_save_state(pci_dev);
- pci_disable_device(pci_dev);
- pci_set_power_state(pci_dev, PCI_D3hot);
-
- mutex_unlock(&priv->action_mutex);
-
- return 0;
-}
-
-static int ipw2100_resume(struct pci_dev *pci_dev)
-{
- struct ipw2100_priv *priv = pci_get_drvdata(pci_dev);
- struct net_device *dev = priv->net_dev;
- int err;
- u32 val;
-
- if (IPW2100_PM_DISABLED)
- return 0;
-
- mutex_lock(&priv->action_mutex);
-
- IPW_DEBUG_INFO("%s: Coming out of suspend...\n", dev->name);
-
- pci_set_power_state(pci_dev, PCI_D0);
- err = pci_enable_device(pci_dev);
- if (err) {
- printk(KERN_ERR "%s: pci_enable_device failed on resume\n",
- dev->name);
- mutex_unlock(&priv->action_mutex);
- return err;
- }
- pci_restore_state(pci_dev);
-
- /*
- * Suspend/Resume resets the PCI configuration space, so we have to
- * re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries
- * from interfering with C3 CPU state. pci_restore_state won't help
- * here since it only restores the first 64 bytes pci config header.
- */
- pci_read_config_dword(pci_dev, 0x40, &val);
- if ((val & 0x0000ff00) != 0)
- pci_write_config_dword(pci_dev, 0x40, val & 0xffff00ff);
-
- /* Set the device back into the PRESENT state; this will also wake
- * the queue of needed */
- netif_device_attach(dev);
-
- /* Bring the device back up */
- if (!(priv->status & STATUS_RF_KILL_SW))
- ipw2100_up(priv, 0);
-
- mutex_unlock(&priv->action_mutex);
-
- return 0;
-}
-#endif
-
-#define IPW2100_DEV_ID(x) { PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, x }
-
-static struct pci_device_id ipw2100_pci_id_table[] __devinitdata = {
- IPW2100_DEV_ID(0x2520), /* IN 2100A mPCI 3A */
- IPW2100_DEV_ID(0x2521), /* IN 2100A mPCI 3B */
- IPW2100_DEV_ID(0x2524), /* IN 2100A mPCI 3B */
- IPW2100_DEV_ID(0x2525), /* IN 2100A mPCI 3B */
- IPW2100_DEV_ID(0x2526), /* IN 2100A mPCI Gen A3 */
- IPW2100_DEV_ID(0x2522), /* IN 2100 mPCI 3B */
- IPW2100_DEV_ID(0x2523), /* IN 2100 mPCI 3A */
- IPW2100_DEV_ID(0x2527), /* IN 2100 mPCI 3B */
- IPW2100_DEV_ID(0x2528), /* IN 2100 mPCI 3B */
- IPW2100_DEV_ID(0x2529), /* IN 2100 mPCI 3B */
- IPW2100_DEV_ID(0x252B), /* IN 2100 mPCI 3A */
- IPW2100_DEV_ID(0x252C), /* IN 2100 mPCI 3A */
- IPW2100_DEV_ID(0x252D), /* IN 2100 mPCI 3A */
-
- IPW2100_DEV_ID(0x2550), /* IB 2100A mPCI 3B */
- IPW2100_DEV_ID(0x2551), /* IB 2100 mPCI 3B */
- IPW2100_DEV_ID(0x2553), /* IB 2100 mPCI 3B */
- IPW2100_DEV_ID(0x2554), /* IB 2100 mPCI 3B */
- IPW2100_DEV_ID(0x2555), /* IB 2100 mPCI 3B */
-
- IPW2100_DEV_ID(0x2560), /* DE 2100A mPCI 3A */
- IPW2100_DEV_ID(0x2562), /* DE 2100A mPCI 3A */
- IPW2100_DEV_ID(0x2563), /* DE 2100A mPCI 3A */
- IPW2100_DEV_ID(0x2561), /* DE 2100 mPCI 3A */
- IPW2100_DEV_ID(0x2565), /* DE 2100 mPCI 3A */
- IPW2100_DEV_ID(0x2566), /* DE 2100 mPCI 3A */
- IPW2100_DEV_ID(0x2567), /* DE 2100 mPCI 3A */
-
- IPW2100_DEV_ID(0x2570), /* GA 2100 mPCI 3B */
-
- IPW2100_DEV_ID(0x2580), /* TO 2100A mPCI 3B */
- IPW2100_DEV_ID(0x2582), /* TO 2100A mPCI 3B */
- IPW2100_DEV_ID(0x2583), /* TO 2100A mPCI 3B */
- IPW2100_DEV_ID(0x2581), /* TO 2100 mPCI 3B */
- IPW2100_DEV_ID(0x2585), /* TO 2100 mPCI 3B */
- IPW2100_DEV_ID(0x2586), /* TO 2100 mPCI 3B */
- IPW2100_DEV_ID(0x2587), /* TO 2100 mPCI 3B */
-
- IPW2100_DEV_ID(0x2590), /* SO 2100A mPCI 3B */
- IPW2100_DEV_ID(0x2592), /* SO 2100A mPCI 3B */
- IPW2100_DEV_ID(0x2591), /* SO 2100 mPCI 3B */
- IPW2100_DEV_ID(0x2593), /* SO 2100 mPCI 3B */
- IPW2100_DEV_ID(0x2596), /* SO 2100 mPCI 3B */
- IPW2100_DEV_ID(0x2598), /* SO 2100 mPCI 3B */
-
- IPW2100_DEV_ID(0x25A0), /* HP 2100 mPCI 3B */
- {0,},
-};
-
-MODULE_DEVICE_TABLE(pci, ipw2100_pci_id_table);
-
-static struct pci_driver ipw2100_pci_driver = {
- .name = DRV_NAME,
- .id_table = ipw2100_pci_id_table,
- .probe = ipw2100_pci_init_one,
- .remove = __devexit_p(ipw2100_pci_remove_one),
-#ifdef CONFIG_PM
- .suspend = ipw2100_suspend,
- .resume = ipw2100_resume,
-#endif
-};
-
-/**
- * Initialize the ipw2100 driver/module
- *
- * @returns 0 if ok, < 0 errno node con error.
- *
- * Note: we cannot init the /proc stuff until the PCI driver is there,
- * or we risk an unlikely race condition on someone accessing
- * uninitialized data in the PCI dev struct through /proc.
- */
-static int __init ipw2100_init(void)
-{
- int ret;
-
- printk(KERN_INFO DRV_NAME ": %s, %s\n", DRV_DESCRIPTION, DRV_VERSION);
- printk(KERN_INFO DRV_NAME ": %s\n", DRV_COPYRIGHT);
-
- ret = pci_register_driver(&ipw2100_pci_driver);
- if (ret)
- goto out;
-
- pm_qos_add_requirement(PM_QOS_CPU_DMA_LATENCY, "ipw2100",
- PM_QOS_DEFAULT_VALUE);
-#ifdef CONFIG_IPW2100_DEBUG
- ipw2100_debug_level = debug;
- ret = driver_create_file(&ipw2100_pci_driver.driver,
- &driver_attr_debug_level);
-#endif
-
-out:
- return ret;
-}
-
-/**
- * Cleanup ipw2100 driver registration
- */
-static void __exit ipw2100_exit(void)
-{
- /* FIXME: IPG: check that we have no instances of the devices open */
-#ifdef CONFIG_IPW2100_DEBUG
- driver_remove_file(&ipw2100_pci_driver.driver,
- &driver_attr_debug_level);
-#endif
- pci_unregister_driver(&ipw2100_pci_driver);
- pm_qos_remove_requirement(PM_QOS_CPU_DMA_LATENCY, "ipw2100");
-}
-
-module_init(ipw2100_init);
-module_exit(ipw2100_exit);
-
-#define WEXT_USECHANNELS 1
-
-static const long ipw2100_frequencies[] = {
- 2412, 2417, 2422, 2427,
- 2432, 2437, 2442, 2447,
- 2452, 2457, 2462, 2467,
- 2472, 2484
-};
-
-#define FREQ_COUNT ARRAY_SIZE(ipw2100_frequencies)
-
-static const long ipw2100_rates_11b[] = {
- 1000000,
- 2000000,
- 5500000,
- 11000000
-};
-
-#define RATE_COUNT ARRAY_SIZE(ipw2100_rates_11b)
-
-static int ipw2100_wx_get_name(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- /*
- * This can be called at any time. No action lock required
- */
-
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- if (!(priv->status & STATUS_ASSOCIATED))
- strcpy(wrqu->name, "unassociated");
- else
- snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11b");
-
- IPW_DEBUG_WX("Name: %s\n", wrqu->name);
- return 0;
-}
-
-static int ipw2100_wx_set_freq(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- struct iw_freq *fwrq = &wrqu->freq;
- int err = 0;
-
- if (priv->ieee->iw_mode == IW_MODE_INFRA)
- return -EOPNOTSUPP;
-
- mutex_lock(&priv->action_mutex);
- if (!(priv->status & STATUS_INITIALIZED)) {
- err = -EIO;
- goto done;
- }
-
- /* if setting by freq convert to channel */
- if (fwrq->e == 1) {
- if ((fwrq->m >= (int)2.412e8 && fwrq->m <= (int)2.487e8)) {
- int f = fwrq->m / 100000;
- int c = 0;
-
- while ((c < REG_MAX_CHANNEL) &&
- (f != ipw2100_frequencies[c]))
- c++;
-
- /* hack to fall through */
- fwrq->e = 0;
- fwrq->m = c + 1;
- }
- }
-
- if (fwrq->e > 0 || fwrq->m > 1000) {
- err = -EOPNOTSUPP;
- goto done;
- } else { /* Set the channel */
- IPW_DEBUG_WX("SET Freq/Channel -> %d \n", fwrq->m);
- err = ipw2100_set_channel(priv, fwrq->m, 0);
- }
-
- done:
- mutex_unlock(&priv->action_mutex);
- return err;
-}
-
-static int ipw2100_wx_get_freq(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- /*
- * This can be called at any time. No action lock required
- */
-
- struct ipw2100_priv *priv = ieee80211_priv(dev);
-
- wrqu->freq.e = 0;
-
- /* If we are associated, trying to associate, or have a statically
- * configured CHANNEL then return that; otherwise return ANY */
- if (priv->config & CFG_STATIC_CHANNEL ||
- priv->status & STATUS_ASSOCIATED)
- wrqu->freq.m = priv->channel;
- else
- wrqu->freq.m = 0;
-
- IPW_DEBUG_WX("GET Freq/Channel -> %d \n", priv->channel);
- return 0;
-
-}
-
-static int ipw2100_wx_set_mode(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- int err = 0;
-
- IPW_DEBUG_WX("SET Mode -> %d \n", wrqu->mode);
-
- if (wrqu->mode == priv->ieee->iw_mode)
- return 0;
-
- mutex_lock(&priv->action_mutex);
- if (!(priv->status & STATUS_INITIALIZED)) {
- err = -EIO;
- goto done;
- }
-
- switch (wrqu->mode) {
-#ifdef CONFIG_IPW2100_MONITOR
- case IW_MODE_MONITOR:
- err = ipw2100_switch_mode(priv, IW_MODE_MONITOR);
- break;
-#endif /* CONFIG_IPW2100_MONITOR */
- case IW_MODE_ADHOC:
- err = ipw2100_switch_mode(priv, IW_MODE_ADHOC);
- break;
- case IW_MODE_INFRA:
- case IW_MODE_AUTO:
- default:
- err = ipw2100_switch_mode(priv, IW_MODE_INFRA);
- break;
- }
-
- done:
- mutex_unlock(&priv->action_mutex);
- return err;
-}
-
-static int ipw2100_wx_get_mode(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- /*
- * This can be called at any time. No action lock required
- */
-
- struct ipw2100_priv *priv = ieee80211_priv(dev);
-
- wrqu->mode = priv->ieee->iw_mode;
- IPW_DEBUG_WX("GET Mode -> %d\n", wrqu->mode);
-
- return 0;
-}
-
-#define POWER_MODES 5
-
-/* Values are in microsecond */
-static const s32 timeout_duration[POWER_MODES] = {
- 350000,
- 250000,
- 75000,
- 37000,
- 25000,
-};
-
-static const s32 period_duration[POWER_MODES] = {
- 400000,
- 700000,
- 1000000,
- 1000000,
- 1000000
-};
-
-static int ipw2100_wx_get_range(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- /*
- * This can be called at any time. No action lock required
- */
-
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- struct iw_range *range = (struct iw_range *)extra;
- u16 val;
- int i, level;
-
- wrqu->data.length = sizeof(*range);
- memset(range, 0, sizeof(*range));
-
- /* Let's try to keep this struct in the same order as in
- * linux/include/wireless.h
- */
-
- /* TODO: See what values we can set, and remove the ones we can't
- * set, or fill them with some default data.
- */
-
- /* ~5 Mb/s real (802.11b) */
- range->throughput = 5 * 1000 * 1000;
-
-// range->sensitivity; /* signal level threshold range */
-
- range->max_qual.qual = 100;
- /* TODO: Find real max RSSI and stick here */
- range->max_qual.level = 0;
- range->max_qual.noise = 0;
- range->max_qual.updated = 7; /* Updated all three */
-
- range->avg_qual.qual = 70; /* > 8% missed beacons is 'bad' */
- /* TODO: Find real 'good' to 'bad' threshol value for RSSI */
- range->avg_qual.level = 20 + IPW2100_RSSI_TO_DBM;
- range->avg_qual.noise = 0;
- range->avg_qual.updated = 7; /* Updated all three */
-
- range->num_bitrates = RATE_COUNT;
-
- for (i = 0; i < RATE_COUNT && i < IW_MAX_BITRATES; i++) {
- range->bitrate[i] = ipw2100_rates_11b[i];
- }
-
- range->min_rts = MIN_RTS_THRESHOLD;
- range->max_rts = MAX_RTS_THRESHOLD;
- range->min_frag = MIN_FRAG_THRESHOLD;
- range->max_frag = MAX_FRAG_THRESHOLD;
-
- range->min_pmp = period_duration[0]; /* Minimal PM period */
- range->max_pmp = period_duration[POWER_MODES - 1]; /* Maximal PM period */
- range->min_pmt = timeout_duration[POWER_MODES - 1]; /* Minimal PM timeout */
- range->max_pmt = timeout_duration[0]; /* Maximal PM timeout */
-
- /* How to decode max/min PM period */
- range->pmp_flags = IW_POWER_PERIOD;
- /* How to decode max/min PM period */
- range->pmt_flags = IW_POWER_TIMEOUT;
- /* What PM options are supported */
- range->pm_capa = IW_POWER_TIMEOUT | IW_POWER_PERIOD;
-
- range->encoding_size[0] = 5;
- range->encoding_size[1] = 13; /* Different token sizes */
- range->num_encoding_sizes = 2; /* Number of entry in the list */
- range->max_encoding_tokens = WEP_KEYS; /* Max number of tokens */
-// range->encoding_login_index; /* token index for login token */
-
- if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
- range->txpower_capa = IW_TXPOW_DBM;
- range->num_txpower = IW_MAX_TXPOWER;
- for (i = 0, level = (IPW_TX_POWER_MAX_DBM * 16);
- i < IW_MAX_TXPOWER;
- i++, level -=
- ((IPW_TX_POWER_MAX_DBM -
- IPW_TX_POWER_MIN_DBM) * 16) / (IW_MAX_TXPOWER - 1))
- range->txpower[i] = level / 16;
- } else {
- range->txpower_capa = 0;
- range->num_txpower = 0;
- }
-
- /* Set the Wireless Extension versions */
- range->we_version_compiled = WIRELESS_EXT;
- range->we_version_source = 18;
-
-// range->retry_capa; /* What retry options are supported */
-// range->retry_flags; /* How to decode max/min retry limit */
-// range->r_time_flags; /* How to decode max/min retry life */
-// range->min_retry; /* Minimal number of retries */
-// range->max_retry; /* Maximal number of retries */
-// range->min_r_time; /* Minimal retry lifetime */
-// range->max_r_time; /* Maximal retry lifetime */
-
- range->num_channels = FREQ_COUNT;
-
- val = 0;
- for (i = 0; i < FREQ_COUNT; i++) {
- // TODO: Include only legal frequencies for some countries
-// if (local->channel_mask & (1 << i)) {
- range->freq[val].i = i + 1;
- range->freq[val].m = ipw2100_frequencies[i] * 100000;
- range->freq[val].e = 1;
- val++;
-// }
- if (val == IW_MAX_FREQUENCIES)
- break;
- }
- range->num_frequency = val;
-
- /* Event capability (kernel + driver) */
- range->event_capa[0] = (IW_EVENT_CAPA_K_0 |
- IW_EVENT_CAPA_MASK(SIOCGIWAP));
- range->event_capa[1] = IW_EVENT_CAPA_K_1;
-
- range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_WPA2 |
- IW_ENC_CAPA_CIPHER_TKIP | IW_ENC_CAPA_CIPHER_CCMP;
-
- IPW_DEBUG_WX("GET Range\n");
-
- return 0;
-}
-
-static int ipw2100_wx_set_wap(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- int err = 0;
-
- static const unsigned char any[] = {
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
- };
- static const unsigned char off[] = {
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
- };
-
- // sanity checks
- if (wrqu->ap_addr.sa_family != ARPHRD_ETHER)
- return -EINVAL;
-
- mutex_lock(&priv->action_mutex);
- if (!(priv->status & STATUS_INITIALIZED)) {
- err = -EIO;
- goto done;
- }
-
- if (!memcmp(any, wrqu->ap_addr.sa_data, ETH_ALEN) ||
- !memcmp(off, wrqu->ap_addr.sa_data, ETH_ALEN)) {
- /* we disable mandatory BSSID association */
- IPW_DEBUG_WX("exit - disable mandatory BSSID\n");
- priv->config &= ~CFG_STATIC_BSSID;
- err = ipw2100_set_mandatory_bssid(priv, NULL, 0);
- goto done;
- }
-
- priv->config |= CFG_STATIC_BSSID;
- memcpy(priv->mandatory_bssid_mac, wrqu->ap_addr.sa_data, ETH_ALEN);
-
- err = ipw2100_set_mandatory_bssid(priv, wrqu->ap_addr.sa_data, 0);
-
- IPW_DEBUG_WX("SET BSSID -> %pM\n", wrqu->ap_addr.sa_data);
-
- done:
- mutex_unlock(&priv->action_mutex);
- return err;
-}
-
-static int ipw2100_wx_get_wap(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- /*
- * This can be called at any time. No action lock required
- */
-
- struct ipw2100_priv *priv = ieee80211_priv(dev);
-
- /* If we are associated, trying to associate, or have a statically
- * configured BSSID then return that; otherwise return ANY */
- if (priv->config & CFG_STATIC_BSSID || priv->status & STATUS_ASSOCIATED) {
- wrqu->ap_addr.sa_family = ARPHRD_ETHER;
- memcpy(wrqu->ap_addr.sa_data, priv->bssid, ETH_ALEN);
- } else
- memset(wrqu->ap_addr.sa_data, 0, ETH_ALEN);
-
- IPW_DEBUG_WX("Getting WAP BSSID: %pM\n", wrqu->ap_addr.sa_data);
- return 0;
-}
-
-static int ipw2100_wx_set_essid(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- char *essid = ""; /* ANY */
- int length = 0;
- int err = 0;
- DECLARE_SSID_BUF(ssid);
-
- mutex_lock(&priv->action_mutex);
- if (!(priv->status & STATUS_INITIALIZED)) {
- err = -EIO;
- goto done;
- }
-
- if (wrqu->essid.flags && wrqu->essid.length) {
- length = wrqu->essid.length;
- essid = extra;
- }
-
- if (length == 0) {
- IPW_DEBUG_WX("Setting ESSID to ANY\n");
- priv->config &= ~CFG_STATIC_ESSID;
- err = ipw2100_set_essid(priv, NULL, 0, 0);
- goto done;
- }
-
- length = min(length, IW_ESSID_MAX_SIZE);
-
- priv->config |= CFG_STATIC_ESSID;
-
- if (priv->essid_len == length && !memcmp(priv->essid, extra, length)) {
- IPW_DEBUG_WX("ESSID set to current ESSID.\n");
- err = 0;
- goto done;
- }
-
- IPW_DEBUG_WX("Setting ESSID: '%s' (%d)\n",
- print_ssid(ssid, essid, length), length);
-
- priv->essid_len = length;
- memcpy(priv->essid, essid, priv->essid_len);
-
- err = ipw2100_set_essid(priv, essid, length, 0);
-
- done:
- mutex_unlock(&priv->action_mutex);
- return err;
-}
-
-static int ipw2100_wx_get_essid(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- /*
- * This can be called at any time. No action lock required
- */
-
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- DECLARE_SSID_BUF(ssid);
-
- /* If we are associated, trying to associate, or have a statically
- * configured ESSID then return that; otherwise return ANY */
- if (priv->config & CFG_STATIC_ESSID || priv->status & STATUS_ASSOCIATED) {
- IPW_DEBUG_WX("Getting essid: '%s'\n",
- print_ssid(ssid, priv->essid, priv->essid_len));
- memcpy(extra, priv->essid, priv->essid_len);
- wrqu->essid.length = priv->essid_len;
- wrqu->essid.flags = 1; /* active */
- } else {
- IPW_DEBUG_WX("Getting essid: ANY\n");
- wrqu->essid.length = 0;
- wrqu->essid.flags = 0; /* active */
- }
-
- return 0;
-}
-
-static int ipw2100_wx_set_nick(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- /*
- * This can be called at any time. No action lock required
- */
-
- struct ipw2100_priv *priv = ieee80211_priv(dev);
-
- if (wrqu->data.length > IW_ESSID_MAX_SIZE)
- return -E2BIG;
-
- wrqu->data.length = min((size_t) wrqu->data.length, sizeof(priv->nick));
- memset(priv->nick, 0, sizeof(priv->nick));
- memcpy(priv->nick, extra, wrqu->data.length);
-
- IPW_DEBUG_WX("SET Nickname -> %s \n", priv->nick);
-
- return 0;
-}
-
-static int ipw2100_wx_get_nick(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- /*
- * This can be called at any time. No action lock required
- */
-
- struct ipw2100_priv *priv = ieee80211_priv(dev);
-
- wrqu->data.length = strlen(priv->nick);
- memcpy(extra, priv->nick, wrqu->data.length);
- wrqu->data.flags = 1; /* active */
-
- IPW_DEBUG_WX("GET Nickname -> %s \n", extra);
-
- return 0;
-}
-
-static int ipw2100_wx_set_rate(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- u32 target_rate = wrqu->bitrate.value;
- u32 rate;
- int err = 0;
-
- mutex_lock(&priv->action_mutex);
- if (!(priv->status & STATUS_INITIALIZED)) {
- err = -EIO;
- goto done;
- }
-
- rate = 0;
-
- if (target_rate == 1000000 ||
- (!wrqu->bitrate.fixed && target_rate > 1000000))
- rate |= TX_RATE_1_MBIT;
- if (target_rate == 2000000 ||
- (!wrqu->bitrate.fixed && target_rate > 2000000))
- rate |= TX_RATE_2_MBIT;
- if (target_rate == 5500000 ||
- (!wrqu->bitrate.fixed && target_rate > 5500000))
- rate |= TX_RATE_5_5_MBIT;
- if (target_rate == 11000000 ||
- (!wrqu->bitrate.fixed && target_rate > 11000000))
- rate |= TX_RATE_11_MBIT;
- if (rate == 0)
- rate = DEFAULT_TX_RATES;
-
- err = ipw2100_set_tx_rates(priv, rate, 0);
-
- IPW_DEBUG_WX("SET Rate -> %04X \n", rate);
- done:
- mutex_unlock(&priv->action_mutex);
- return err;
-}
-
-static int ipw2100_wx_get_rate(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- int val;
- int len = sizeof(val);
- int err = 0;
-
- if (!(priv->status & STATUS_ENABLED) ||
- priv->status & STATUS_RF_KILL_MASK ||
- !(priv->status & STATUS_ASSOCIATED)) {
- wrqu->bitrate.value = 0;
- return 0;
- }
-
- mutex_lock(&priv->action_mutex);
- if (!(priv->status & STATUS_INITIALIZED)) {
- err = -EIO;
- goto done;
- }
-
- err = ipw2100_get_ordinal(priv, IPW_ORD_CURRENT_TX_RATE, &val, &len);
- if (err) {
- IPW_DEBUG_WX("failed querying ordinals.\n");
- goto done;
- }
-
- switch (val & TX_RATE_MASK) {
- case TX_RATE_1_MBIT:
- wrqu->bitrate.value = 1000000;
- break;
- case TX_RATE_2_MBIT:
- wrqu->bitrate.value = 2000000;
- break;
- case TX_RATE_5_5_MBIT:
- wrqu->bitrate.value = 5500000;
- break;
- case TX_RATE_11_MBIT:
- wrqu->bitrate.value = 11000000;
- break;
- default:
- wrqu->bitrate.value = 0;
- }
-
- IPW_DEBUG_WX("GET Rate -> %d \n", wrqu->bitrate.value);
-
- done:
- mutex_unlock(&priv->action_mutex);
- return err;
-}
-
-static int ipw2100_wx_set_rts(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- int value, err;
-
- /* Auto RTS not yet supported */
- if (wrqu->rts.fixed == 0)
- return -EINVAL;
-
- mutex_lock(&priv->action_mutex);
- if (!(priv->status & STATUS_INITIALIZED)) {
- err = -EIO;
- goto done;
- }
-
- if (wrqu->rts.disabled)
- value = priv->rts_threshold | RTS_DISABLED;
- else {
- if (wrqu->rts.value < 1 || wrqu->rts.value > 2304) {
- err = -EINVAL;
- goto done;
- }
- value = wrqu->rts.value;
- }
-
- err = ipw2100_set_rts_threshold(priv, value);
-
- IPW_DEBUG_WX("SET RTS Threshold -> 0x%08X \n", value);
- done:
- mutex_unlock(&priv->action_mutex);
- return err;
-}
-
-static int ipw2100_wx_get_rts(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- /*
- * This can be called at any time. No action lock required
- */
-
- struct ipw2100_priv *priv = ieee80211_priv(dev);
-
- wrqu->rts.value = priv->rts_threshold & ~RTS_DISABLED;
- wrqu->rts.fixed = 1; /* no auto select */
-
- /* If RTS is set to the default value, then it is disabled */
- wrqu->rts.disabled = (priv->rts_threshold & RTS_DISABLED) ? 1 : 0;
-
- IPW_DEBUG_WX("GET RTS Threshold -> 0x%08X \n", wrqu->rts.value);
-
- return 0;
-}
-
-static int ipw2100_wx_set_txpow(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- int err = 0, value;
-
- if (ipw_radio_kill_sw(priv, wrqu->txpower.disabled))
- return -EINPROGRESS;
-
- if (priv->ieee->iw_mode != IW_MODE_ADHOC)
- return 0;
-
- if ((wrqu->txpower.flags & IW_TXPOW_TYPE) != IW_TXPOW_DBM)
- return -EINVAL;
-
- if (wrqu->txpower.fixed == 0)
- value = IPW_TX_POWER_DEFAULT;
- else {
- if (wrqu->txpower.value < IPW_TX_POWER_MIN_DBM ||
- wrqu->txpower.value > IPW_TX_POWER_MAX_DBM)
- return -EINVAL;
-
- value = wrqu->txpower.value;
- }
-
- mutex_lock(&priv->action_mutex);
- if (!(priv->status & STATUS_INITIALIZED)) {
- err = -EIO;
- goto done;
- }
-
- err = ipw2100_set_tx_power(priv, value);
-
- IPW_DEBUG_WX("SET TX Power -> %d \n", value);
-
- done:
- mutex_unlock(&priv->action_mutex);
- return err;
-}
-
-static int ipw2100_wx_get_txpow(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- /*
- * This can be called at any time. No action lock required
- */
-
- struct ipw2100_priv *priv = ieee80211_priv(dev);
-
- wrqu->txpower.disabled = (priv->status & STATUS_RF_KILL_MASK) ? 1 : 0;
-
- if (priv->tx_power == IPW_TX_POWER_DEFAULT) {
- wrqu->txpower.fixed = 0;
- wrqu->txpower.value = IPW_TX_POWER_MAX_DBM;
- } else {
- wrqu->txpower.fixed = 1;
- wrqu->txpower.value = priv->tx_power;
- }
-
- wrqu->txpower.flags = IW_TXPOW_DBM;
-
- IPW_DEBUG_WX("GET TX Power -> %d \n", wrqu->txpower.value);
-
- return 0;
-}
-
-static int ipw2100_wx_set_frag(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- /*
- * This can be called at any time. No action lock required
- */
-
- struct ipw2100_priv *priv = ieee80211_priv(dev);
-
- if (!wrqu->frag.fixed)
- return -EINVAL;
-
- if (wrqu->frag.disabled) {
- priv->frag_threshold |= FRAG_DISABLED;
- priv->ieee->fts = DEFAULT_FTS;
- } else {
- if (wrqu->frag.value < MIN_FRAG_THRESHOLD ||
- wrqu->frag.value > MAX_FRAG_THRESHOLD)
- return -EINVAL;
-
- priv->ieee->fts = wrqu->frag.value & ~0x1;
- priv->frag_threshold = priv->ieee->fts;
- }
-
- IPW_DEBUG_WX("SET Frag Threshold -> %d \n", priv->ieee->fts);
-
- return 0;
-}
-
-static int ipw2100_wx_get_frag(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- /*
- * This can be called at any time. No action lock required
- */
-
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- wrqu->frag.value = priv->frag_threshold & ~FRAG_DISABLED;
- wrqu->frag.fixed = 0; /* no auto select */
- wrqu->frag.disabled = (priv->frag_threshold & FRAG_DISABLED) ? 1 : 0;
-
- IPW_DEBUG_WX("GET Frag Threshold -> %d \n", wrqu->frag.value);
-
- return 0;
-}
-
-static int ipw2100_wx_set_retry(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- int err = 0;
-
- if (wrqu->retry.flags & IW_RETRY_LIFETIME || wrqu->retry.disabled)
- return -EINVAL;
-
- if (!(wrqu->retry.flags & IW_RETRY_LIMIT))
- return 0;
-
- mutex_lock(&priv->action_mutex);
- if (!(priv->status & STATUS_INITIALIZED)) {
- err = -EIO;
- goto done;
- }
-
- if (wrqu->retry.flags & IW_RETRY_SHORT) {
- err = ipw2100_set_short_retry(priv, wrqu->retry.value);
- IPW_DEBUG_WX("SET Short Retry Limit -> %d \n",
- wrqu->retry.value);
- goto done;
- }
-
- if (wrqu->retry.flags & IW_RETRY_LONG) {
- err = ipw2100_set_long_retry(priv, wrqu->retry.value);
- IPW_DEBUG_WX("SET Long Retry Limit -> %d \n",
- wrqu->retry.value);
- goto done;
- }
-
- err = ipw2100_set_short_retry(priv, wrqu->retry.value);
- if (!err)
- err = ipw2100_set_long_retry(priv, wrqu->retry.value);
-
- IPW_DEBUG_WX("SET Both Retry Limits -> %d \n", wrqu->retry.value);
-
- done:
- mutex_unlock(&priv->action_mutex);
- return err;
-}
-
-static int ipw2100_wx_get_retry(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- /*
- * This can be called at any time. No action lock required
- */
-
- struct ipw2100_priv *priv = ieee80211_priv(dev);
-
- wrqu->retry.disabled = 0; /* can't be disabled */
-
- if ((wrqu->retry.flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME)
- return -EINVAL;
-
- if (wrqu->retry.flags & IW_RETRY_LONG) {
- wrqu->retry.flags = IW_RETRY_LIMIT | IW_RETRY_LONG;
- wrqu->retry.value = priv->long_retry_limit;
- } else {
- wrqu->retry.flags =
- (priv->short_retry_limit !=
- priv->long_retry_limit) ?
- IW_RETRY_LIMIT | IW_RETRY_SHORT : IW_RETRY_LIMIT;
-
- wrqu->retry.value = priv->short_retry_limit;
- }
-
- IPW_DEBUG_WX("GET Retry -> %d \n", wrqu->retry.value);
-
- return 0;
-}
-
-static int ipw2100_wx_set_scan(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- int err = 0;
-
- mutex_lock(&priv->action_mutex);
- if (!(priv->status & STATUS_INITIALIZED)) {
- err = -EIO;
- goto done;
- }
-
- IPW_DEBUG_WX("Initiating scan...\n");
-
- priv->user_requested_scan = 1;
- if (ipw2100_set_scan_options(priv) || ipw2100_start_scan(priv)) {
- IPW_DEBUG_WX("Start scan failed.\n");
-
- /* TODO: Mark a scan as pending so when hardware initialized
- * a scan starts */
- }
-
- done:
- mutex_unlock(&priv->action_mutex);
- return err;
-}
-
-static int ipw2100_wx_get_scan(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- /*
- * This can be called at any time. No action lock required
- */
-
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- return ieee80211_wx_get_scan(priv->ieee, info, wrqu, extra);
-}
-
-/*
- * Implementation based on code in hostap-driver v0.1.3 hostap_ioctl.c
- */
-static int ipw2100_wx_set_encode(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *key)
-{
- /*
- * No check of STATUS_INITIALIZED required
- */
-
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- return ieee80211_wx_set_encode(priv->ieee, info, wrqu, key);
-}
-
-static int ipw2100_wx_get_encode(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *key)
-{
- /*
- * This can be called at any time. No action lock required
- */
-
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- return ieee80211_wx_get_encode(priv->ieee, info, wrqu, key);
-}
-
-static int ipw2100_wx_set_power(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- int err = 0;
-
- mutex_lock(&priv->action_mutex);
- if (!(priv->status & STATUS_INITIALIZED)) {
- err = -EIO;
- goto done;
- }
-
- if (wrqu->power.disabled) {
- priv->power_mode = IPW_POWER_LEVEL(priv->power_mode);
- err = ipw2100_set_power_mode(priv, IPW_POWER_MODE_CAM);
- IPW_DEBUG_WX("SET Power Management Mode -> off\n");
- goto done;
- }
-
- switch (wrqu->power.flags & IW_POWER_MODE) {
- case IW_POWER_ON: /* If not specified */
- case IW_POWER_MODE: /* If set all mask */
- case IW_POWER_ALL_R: /* If explicitly state all */
- break;
- default: /* Otherwise we don't support it */
- IPW_DEBUG_WX("SET PM Mode: %X not supported.\n",
- wrqu->power.flags);
- err = -EOPNOTSUPP;
- goto done;
- }
-
- /* If the user hasn't specified a power management mode yet, default
- * to BATTERY */
- priv->power_mode = IPW_POWER_ENABLED | priv->power_mode;
- err = ipw2100_set_power_mode(priv, IPW_POWER_LEVEL(priv->power_mode));
-
- IPW_DEBUG_WX("SET Power Management Mode -> 0x%02X\n", priv->power_mode);
-
- done:
- mutex_unlock(&priv->action_mutex);
- return err;
-
-}
-
-static int ipw2100_wx_get_power(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- /*
- * This can be called at any time. No action lock required
- */
-
- struct ipw2100_priv *priv = ieee80211_priv(dev);
-
- if (!(priv->power_mode & IPW_POWER_ENABLED))
- wrqu->power.disabled = 1;
- else {
- wrqu->power.disabled = 0;
- wrqu->power.flags = 0;
- }
-
- IPW_DEBUG_WX("GET Power Management Mode -> %02X\n", priv->power_mode);
-
- return 0;
-}
-
-/*
- * WE-18 WPA support
- */
-
-/* SIOCSIWGENIE */
-static int ipw2100_wx_set_genie(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
-
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- struct ieee80211_device *ieee = priv->ieee;
- u8 *buf;
-
- if (!ieee->wpa_enabled)
- return -EOPNOTSUPP;
-
- if (wrqu->data.length > MAX_WPA_IE_LEN ||
- (wrqu->data.length && extra == NULL))
- return -EINVAL;
-
- if (wrqu->data.length) {
- buf = kmemdup(extra, wrqu->data.length, GFP_KERNEL);
- if (buf == NULL)
- return -ENOMEM;
-
- kfree(ieee->wpa_ie);
- ieee->wpa_ie = buf;
- ieee->wpa_ie_len = wrqu->data.length;
- } else {
- kfree(ieee->wpa_ie);
- ieee->wpa_ie = NULL;
- ieee->wpa_ie_len = 0;
- }
-
- ipw2100_wpa_assoc_frame(priv, ieee->wpa_ie, ieee->wpa_ie_len);
-
- return 0;
-}
-
-/* SIOCGIWGENIE */
-static int ipw2100_wx_get_genie(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- struct ieee80211_device *ieee = priv->ieee;
-
- if (ieee->wpa_ie_len == 0 || ieee->wpa_ie == NULL) {
- wrqu->data.length = 0;
- return 0;
- }
-
- if (wrqu->data.length < ieee->wpa_ie_len)
- return -E2BIG;
-
- wrqu->data.length = ieee->wpa_ie_len;
- memcpy(extra, ieee->wpa_ie, ieee->wpa_ie_len);
-
- return 0;
-}
-
-/* SIOCSIWAUTH */
-static int ipw2100_wx_set_auth(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- struct ieee80211_device *ieee = priv->ieee;
- struct iw_param *param = &wrqu->param;
- struct lib80211_crypt_data *crypt;
- unsigned long flags;
- int ret = 0;
-
- switch (param->flags & IW_AUTH_INDEX) {
- case IW_AUTH_WPA_VERSION:
- case IW_AUTH_CIPHER_PAIRWISE:
- case IW_AUTH_CIPHER_GROUP:
- case IW_AUTH_KEY_MGMT:
- /*
- * ipw2200 does not use these parameters
- */
- break;
-
- case IW_AUTH_TKIP_COUNTERMEASURES:
- crypt = priv->ieee->crypt_info.crypt[priv->ieee->crypt_info.tx_keyidx];
- if (!crypt || !crypt->ops->set_flags || !crypt->ops->get_flags)
- break;
-
- flags = crypt->ops->get_flags(crypt->priv);
-
- if (param->value)
- flags |= IEEE80211_CRYPTO_TKIP_COUNTERMEASURES;
- else
- flags &= ~IEEE80211_CRYPTO_TKIP_COUNTERMEASURES;
-
- crypt->ops->set_flags(flags, crypt->priv);
-
- break;
-
- case IW_AUTH_DROP_UNENCRYPTED:{
- /* HACK:
- *
- * wpa_supplicant calls set_wpa_enabled when the driver
- * is loaded and unloaded, regardless of if WPA is being
- * used. No other calls are made which can be used to
- * determine if encryption will be used or not prior to
- * association being expected. If encryption is not being
- * used, drop_unencrypted is set to false, else true -- we
- * can use this to determine if the CAP_PRIVACY_ON bit should
- * be set.
- */
- struct ieee80211_security sec = {
- .flags = SEC_ENABLED,
- .enabled = param->value,
- };
- priv->ieee->drop_unencrypted = param->value;
- /* We only change SEC_LEVEL for open mode. Others
- * are set by ipw_wpa_set_encryption.
- */
- if (!param->value) {
- sec.flags |= SEC_LEVEL;
- sec.level = SEC_LEVEL_0;
- } else {
- sec.flags |= SEC_LEVEL;
- sec.level = SEC_LEVEL_1;
- }
- if (priv->ieee->set_security)
- priv->ieee->set_security(priv->ieee->dev, &sec);
- break;
- }
-
- case IW_AUTH_80211_AUTH_ALG:
- ret = ipw2100_wpa_set_auth_algs(priv, param->value);
- break;
-
- case IW_AUTH_WPA_ENABLED:
- ret = ipw2100_wpa_enable(priv, param->value);
- break;
-
- case IW_AUTH_RX_UNENCRYPTED_EAPOL:
- ieee->ieee802_1x = param->value;
- break;
-
- //case IW_AUTH_ROAMING_CONTROL:
- case IW_AUTH_PRIVACY_INVOKED:
- ieee->privacy_invoked = param->value;
- break;
-
- default:
- return -EOPNOTSUPP;
- }
- return ret;
-}
-
-/* SIOCGIWAUTH */
-static int ipw2100_wx_get_auth(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- struct ieee80211_device *ieee = priv->ieee;
- struct lib80211_crypt_data *crypt;
- struct iw_param *param = &wrqu->param;
- int ret = 0;
-
- switch (param->flags & IW_AUTH_INDEX) {
- case IW_AUTH_WPA_VERSION:
- case IW_AUTH_CIPHER_PAIRWISE:
- case IW_AUTH_CIPHER_GROUP:
- case IW_AUTH_KEY_MGMT:
- /*
- * wpa_supplicant will control these internally
- */
- ret = -EOPNOTSUPP;
- break;
-
- case IW_AUTH_TKIP_COUNTERMEASURES:
- crypt = priv->ieee->crypt_info.crypt[priv->ieee->crypt_info.tx_keyidx];
- if (!crypt || !crypt->ops->get_flags) {
- IPW_DEBUG_WARNING("Can't get TKIP countermeasures: "
- "crypt not set!\n");
- break;
- }
-
- param->value = (crypt->ops->get_flags(crypt->priv) &
- IEEE80211_CRYPTO_TKIP_COUNTERMEASURES) ? 1 : 0;
-
- break;
-
- case IW_AUTH_DROP_UNENCRYPTED:
- param->value = ieee->drop_unencrypted;
- break;
-
- case IW_AUTH_80211_AUTH_ALG:
- param->value = priv->ieee->sec.auth_mode;
- break;
-
- case IW_AUTH_WPA_ENABLED:
- param->value = ieee->wpa_enabled;
- break;
-
- case IW_AUTH_RX_UNENCRYPTED_EAPOL:
- param->value = ieee->ieee802_1x;
- break;
-
- case IW_AUTH_ROAMING_CONTROL:
- case IW_AUTH_PRIVACY_INVOKED:
- param->value = ieee->privacy_invoked;
- break;
-
- default:
- return -EOPNOTSUPP;
- }
- return 0;
-}
-
-/* SIOCSIWENCODEEXT */
-static int ipw2100_wx_set_encodeext(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- return ieee80211_wx_set_encodeext(priv->ieee, info, wrqu, extra);
-}
-
-/* SIOCGIWENCODEEXT */
-static int ipw2100_wx_get_encodeext(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- return ieee80211_wx_get_encodeext(priv->ieee, info, wrqu, extra);
-}
-
-/* SIOCSIWMLME */
-static int ipw2100_wx_set_mlme(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- struct iw_mlme *mlme = (struct iw_mlme *)extra;
- __le16 reason;
-
- reason = cpu_to_le16(mlme->reason_code);
-
- switch (mlme->cmd) {
- case IW_MLME_DEAUTH:
- // silently ignore
- break;
-
- case IW_MLME_DISASSOC:
- ipw2100_disassociate_bssid(priv);
- break;
-
- default:
- return -EOPNOTSUPP;
- }
- return 0;
-}
-
-/*
- *
- * IWPRIV handlers
- *
- */
-#ifdef CONFIG_IPW2100_MONITOR
-static int ipw2100_wx_set_promisc(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- int *parms = (int *)extra;
- int enable = (parms[0] > 0);
- int err = 0;
-
- mutex_lock(&priv->action_mutex);
- if (!(priv->status & STATUS_INITIALIZED)) {
- err = -EIO;
- goto done;
- }
-
- if (enable) {
- if (priv->ieee->iw_mode == IW_MODE_MONITOR) {
- err = ipw2100_set_channel(priv, parms[1], 0);
- goto done;
- }
- priv->channel = parms[1];
- err = ipw2100_switch_mode(priv, IW_MODE_MONITOR);
- } else {
- if (priv->ieee->iw_mode == IW_MODE_MONITOR)
- err = ipw2100_switch_mode(priv, priv->last_mode);
- }
- done:
- mutex_unlock(&priv->action_mutex);
- return err;
-}
-
-static int ipw2100_wx_reset(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- if (priv->status & STATUS_INITIALIZED)
- schedule_reset(priv);
- return 0;
-}
-
-#endif
-
-static int ipw2100_wx_set_powermode(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- int err = 0, mode = *(int *)extra;
-
- mutex_lock(&priv->action_mutex);
- if (!(priv->status & STATUS_INITIALIZED)) {
- err = -EIO;
- goto done;
- }
-
- if ((mode < 0) || (mode > POWER_MODES))
- mode = IPW_POWER_AUTO;
-
- if (IPW_POWER_LEVEL(priv->power_mode) != mode)
- err = ipw2100_set_power_mode(priv, mode);
- done:
- mutex_unlock(&priv->action_mutex);
- return err;
-}
-
-#define MAX_POWER_STRING 80
-static int ipw2100_wx_get_powermode(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- /*
- * This can be called at any time. No action lock required
- */
-
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- int level = IPW_POWER_LEVEL(priv->power_mode);
- s32 timeout, period;
-
- if (!(priv->power_mode & IPW_POWER_ENABLED)) {
- snprintf(extra, MAX_POWER_STRING,
- "Power save level: %d (Off)", level);
- } else {
- switch (level) {
- case IPW_POWER_MODE_CAM:
- snprintf(extra, MAX_POWER_STRING,
- "Power save level: %d (None)", level);
- break;
- case IPW_POWER_AUTO:
- snprintf(extra, MAX_POWER_STRING,
- "Power save level: %d (Auto)", level);
- break;
- default:
- timeout = timeout_duration[level - 1] / 1000;
- period = period_duration[level - 1] / 1000;
- snprintf(extra, MAX_POWER_STRING,
- "Power save level: %d "
- "(Timeout %dms, Period %dms)",
- level, timeout, period);
- }
- }
-
- wrqu->data.length = strlen(extra) + 1;
-
- return 0;
-}
-
-static int ipw2100_wx_set_preamble(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- int err, mode = *(int *)extra;
-
- mutex_lock(&priv->action_mutex);
- if (!(priv->status & STATUS_INITIALIZED)) {
- err = -EIO;
- goto done;
- }
-
- if (mode == 1)
- priv->config |= CFG_LONG_PREAMBLE;
- else if (mode == 0)
- priv->config &= ~CFG_LONG_PREAMBLE;
- else {
- err = -EINVAL;
- goto done;
- }
-
- err = ipw2100_system_config(priv, 0);
-
- done:
- mutex_unlock(&priv->action_mutex);
- return err;
-}
-
-static int ipw2100_wx_get_preamble(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- /*
- * This can be called at any time. No action lock required
- */
-
- struct ipw2100_priv *priv = ieee80211_priv(dev);
-
- if (priv->config & CFG_LONG_PREAMBLE)
- snprintf(wrqu->name, IFNAMSIZ, "long (1)");
- else
- snprintf(wrqu->name, IFNAMSIZ, "auto (0)");
-
- return 0;
-}
-
-#ifdef CONFIG_IPW2100_MONITOR
-static int ipw2100_wx_set_crc_check(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- int err, mode = *(int *)extra;
-
- mutex_lock(&priv->action_mutex);
- if (!(priv->status & STATUS_INITIALIZED)) {
- err = -EIO;
- goto done;
- }
-
- if (mode == 1)
- priv->config |= CFG_CRC_CHECK;
- else if (mode == 0)
- priv->config &= ~CFG_CRC_CHECK;
- else {
- err = -EINVAL;
- goto done;
- }
- err = 0;
-
- done:
- mutex_unlock(&priv->action_mutex);
- return err;
-}
-
-static int ipw2100_wx_get_crc_check(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- /*
- * This can be called at any time. No action lock required
- */
-
- struct ipw2100_priv *priv = ieee80211_priv(dev);
-
- if (priv->config & CFG_CRC_CHECK)
- snprintf(wrqu->name, IFNAMSIZ, "CRC checked (1)");
- else
- snprintf(wrqu->name, IFNAMSIZ, "CRC ignored (0)");
-
- return 0;
-}
-#endif /* CONFIG_IPW2100_MONITOR */
-
-static iw_handler ipw2100_wx_handlers[] = {
- NULL, /* SIOCSIWCOMMIT */
- ipw2100_wx_get_name, /* SIOCGIWNAME */
- NULL, /* SIOCSIWNWID */
- NULL, /* SIOCGIWNWID */
- ipw2100_wx_set_freq, /* SIOCSIWFREQ */
- ipw2100_wx_get_freq, /* SIOCGIWFREQ */
- ipw2100_wx_set_mode, /* SIOCSIWMODE */
- ipw2100_wx_get_mode, /* SIOCGIWMODE */
- NULL, /* SIOCSIWSENS */
- NULL, /* SIOCGIWSENS */
- NULL, /* SIOCSIWRANGE */
- ipw2100_wx_get_range, /* SIOCGIWRANGE */
- NULL, /* SIOCSIWPRIV */
- NULL, /* SIOCGIWPRIV */
- NULL, /* SIOCSIWSTATS */
- NULL, /* SIOCGIWSTATS */
- NULL, /* SIOCSIWSPY */
- NULL, /* SIOCGIWSPY */
- NULL, /* SIOCGIWTHRSPY */
- NULL, /* SIOCWIWTHRSPY */
- ipw2100_wx_set_wap, /* SIOCSIWAP */
- ipw2100_wx_get_wap, /* SIOCGIWAP */
- ipw2100_wx_set_mlme, /* SIOCSIWMLME */
- NULL, /* SIOCGIWAPLIST -- deprecated */
- ipw2100_wx_set_scan, /* SIOCSIWSCAN */
- ipw2100_wx_get_scan, /* SIOCGIWSCAN */
- ipw2100_wx_set_essid, /* SIOCSIWESSID */
- ipw2100_wx_get_essid, /* SIOCGIWESSID */
- ipw2100_wx_set_nick, /* SIOCSIWNICKN */
- ipw2100_wx_get_nick, /* SIOCGIWNICKN */
- NULL, /* -- hole -- */
- NULL, /* -- hole -- */
- ipw2100_wx_set_rate, /* SIOCSIWRATE */
- ipw2100_wx_get_rate, /* SIOCGIWRATE */
- ipw2100_wx_set_rts, /* SIOCSIWRTS */
- ipw2100_wx_get_rts, /* SIOCGIWRTS */
- ipw2100_wx_set_frag, /* SIOCSIWFRAG */
- ipw2100_wx_get_frag, /* SIOCGIWFRAG */
- ipw2100_wx_set_txpow, /* SIOCSIWTXPOW */
- ipw2100_wx_get_txpow, /* SIOCGIWTXPOW */
- ipw2100_wx_set_retry, /* SIOCSIWRETRY */
- ipw2100_wx_get_retry, /* SIOCGIWRETRY */
- ipw2100_wx_set_encode, /* SIOCSIWENCODE */
- ipw2100_wx_get_encode, /* SIOCGIWENCODE */
- ipw2100_wx_set_power, /* SIOCSIWPOWER */
- ipw2100_wx_get_power, /* SIOCGIWPOWER */
- NULL, /* -- hole -- */
- NULL, /* -- hole -- */
- ipw2100_wx_set_genie, /* SIOCSIWGENIE */
- ipw2100_wx_get_genie, /* SIOCGIWGENIE */
- ipw2100_wx_set_auth, /* SIOCSIWAUTH */
- ipw2100_wx_get_auth, /* SIOCGIWAUTH */
- ipw2100_wx_set_encodeext, /* SIOCSIWENCODEEXT */
- ipw2100_wx_get_encodeext, /* SIOCGIWENCODEEXT */
- NULL, /* SIOCSIWPMKSA */
-};
-
-#define IPW2100_PRIV_SET_MONITOR SIOCIWFIRSTPRIV
-#define IPW2100_PRIV_RESET SIOCIWFIRSTPRIV+1
-#define IPW2100_PRIV_SET_POWER SIOCIWFIRSTPRIV+2
-#define IPW2100_PRIV_GET_POWER SIOCIWFIRSTPRIV+3
-#define IPW2100_PRIV_SET_LONGPREAMBLE SIOCIWFIRSTPRIV+4
-#define IPW2100_PRIV_GET_LONGPREAMBLE SIOCIWFIRSTPRIV+5
-#define IPW2100_PRIV_SET_CRC_CHECK SIOCIWFIRSTPRIV+6
-#define IPW2100_PRIV_GET_CRC_CHECK SIOCIWFIRSTPRIV+7
-
-static const struct iw_priv_args ipw2100_private_args[] = {
-
-#ifdef CONFIG_IPW2100_MONITOR
- {
- IPW2100_PRIV_SET_MONITOR,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "monitor"},
- {
- IPW2100_PRIV_RESET,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 0, 0, "reset"},
-#endif /* CONFIG_IPW2100_MONITOR */
-
- {
- IPW2100_PRIV_SET_POWER,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_power"},
- {
- IPW2100_PRIV_GET_POWER,
- 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | MAX_POWER_STRING,
- "get_power"},
- {
- IPW2100_PRIV_SET_LONGPREAMBLE,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_preamble"},
- {
- IPW2100_PRIV_GET_LONGPREAMBLE,
- 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | IFNAMSIZ, "get_preamble"},
-#ifdef CONFIG_IPW2100_MONITOR
- {
- IPW2100_PRIV_SET_CRC_CHECK,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_crc_check"},
- {
- IPW2100_PRIV_GET_CRC_CHECK,
- 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | IFNAMSIZ, "get_crc_check"},
-#endif /* CONFIG_IPW2100_MONITOR */
-};
-
-static iw_handler ipw2100_private_handler[] = {
-#ifdef CONFIG_IPW2100_MONITOR
- ipw2100_wx_set_promisc,
- ipw2100_wx_reset,
-#else /* CONFIG_IPW2100_MONITOR */
- NULL,
- NULL,
-#endif /* CONFIG_IPW2100_MONITOR */
- ipw2100_wx_set_powermode,
- ipw2100_wx_get_powermode,
- ipw2100_wx_set_preamble,
- ipw2100_wx_get_preamble,
-#ifdef CONFIG_IPW2100_MONITOR
- ipw2100_wx_set_crc_check,
- ipw2100_wx_get_crc_check,
-#else /* CONFIG_IPW2100_MONITOR */
- NULL,
- NULL,
-#endif /* CONFIG_IPW2100_MONITOR */
-};
-
-/*
- * Get wireless statistics.
- * Called by /proc/net/wireless
- * Also called by SIOCGIWSTATS
- */
-static struct iw_statistics *ipw2100_wx_wireless_stats(struct net_device *dev)
-{
- enum {
- POOR = 30,
- FAIR = 60,
- GOOD = 80,
- VERY_GOOD = 90,
- EXCELLENT = 95,
- PERFECT = 100
- };
- int rssi_qual;
- int tx_qual;
- int beacon_qual;
-
- struct ipw2100_priv *priv = ieee80211_priv(dev);
- struct iw_statistics *wstats;
- u32 rssi, quality, tx_retries, missed_beacons, tx_failures;
- u32 ord_len = sizeof(u32);
-
- if (!priv)
- return (struct iw_statistics *)NULL;
-
- wstats = &priv->wstats;
-
- /* if hw is disabled, then ipw2100_get_ordinal() can't be called.
- * ipw2100_wx_wireless_stats seems to be called before fw is
- * initialized. STATUS_ASSOCIATED will only be set if the hw is up
- * and associated; if not associcated, the values are all meaningless
- * anyway, so set them all to NULL and INVALID */
- if (!(priv->status & STATUS_ASSOCIATED)) {
- wstats->miss.beacon = 0;
- wstats->discard.retries = 0;
- wstats->qual.qual = 0;
- wstats->qual.level = 0;
- wstats->qual.noise = 0;
- wstats->qual.updated = 7;
- wstats->qual.updated |= IW_QUAL_NOISE_INVALID |
- IW_QUAL_QUAL_INVALID | IW_QUAL_LEVEL_INVALID;
- return wstats;
- }
-
- if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_PERCENT_MISSED_BCNS,
- &missed_beacons, &ord_len))
- goto fail_get_ordinal;
-
- /* If we don't have a connection the quality and level is 0 */
- if (!(priv->status & STATUS_ASSOCIATED)) {
- wstats->qual.qual = 0;
- wstats->qual.level = 0;
- } else {
- if (ipw2100_get_ordinal(priv, IPW_ORD_RSSI_AVG_CURR,
- &rssi, &ord_len))
- goto fail_get_ordinal;
- wstats->qual.level = rssi + IPW2100_RSSI_TO_DBM;
- if (rssi < 10)
- rssi_qual = rssi * POOR / 10;
- else if (rssi < 15)
- rssi_qual = (rssi - 10) * (FAIR - POOR) / 5 + POOR;
- else if (rssi < 20)
- rssi_qual = (rssi - 15) * (GOOD - FAIR) / 5 + FAIR;
- else if (rssi < 30)
- rssi_qual = (rssi - 20) * (VERY_GOOD - GOOD) /
- 10 + GOOD;
- else
- rssi_qual = (rssi - 30) * (PERFECT - VERY_GOOD) /
- 10 + VERY_GOOD;
-
- if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_PERCENT_RETRIES,
- &tx_retries, &ord_len))
- goto fail_get_ordinal;
-
- if (tx_retries > 75)
- tx_qual = (90 - tx_retries) * POOR / 15;
- else if (tx_retries > 70)
- tx_qual = (75 - tx_retries) * (FAIR - POOR) / 5 + POOR;
- else if (tx_retries > 65)
- tx_qual = (70 - tx_retries) * (GOOD - FAIR) / 5 + FAIR;
- else if (tx_retries > 50)
- tx_qual = (65 - tx_retries) * (VERY_GOOD - GOOD) /
- 15 + GOOD;
- else
- tx_qual = (50 - tx_retries) *
- (PERFECT - VERY_GOOD) / 50 + VERY_GOOD;
-
- if (missed_beacons > 50)
- beacon_qual = (60 - missed_beacons) * POOR / 10;
- else if (missed_beacons > 40)
- beacon_qual = (50 - missed_beacons) * (FAIR - POOR) /
- 10 + POOR;
- else if (missed_beacons > 32)
- beacon_qual = (40 - missed_beacons) * (GOOD - FAIR) /
- 18 + FAIR;
- else if (missed_beacons > 20)
- beacon_qual = (32 - missed_beacons) *
- (VERY_GOOD - GOOD) / 20 + GOOD;
- else
- beacon_qual = (20 - missed_beacons) *
- (PERFECT - VERY_GOOD) / 20 + VERY_GOOD;
-
- quality = min(beacon_qual, min(tx_qual, rssi_qual));
-
-#ifdef CONFIG_IPW2100_DEBUG
- if (beacon_qual == quality)
- IPW_DEBUG_WX("Quality clamped by Missed Beacons\n");
- else if (tx_qual == quality)
- IPW_DEBUG_WX("Quality clamped by Tx Retries\n");
- else if (quality != 100)
- IPW_DEBUG_WX("Quality clamped by Signal Strength\n");
- else
- IPW_DEBUG_WX("Quality not clamped.\n");
-#endif
-
- wstats->qual.qual = quality;
- wstats->qual.level = rssi + IPW2100_RSSI_TO_DBM;
- }
-
- wstats->qual.noise = 0;
- wstats->qual.updated = 7;
- wstats->qual.updated |= IW_QUAL_NOISE_INVALID;
-
- /* FIXME: this is percent and not a # */
- wstats->miss.beacon = missed_beacons;
-
- if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_TX_FAILURES,
- &tx_failures, &ord_len))
- goto fail_get_ordinal;
- wstats->discard.retries = tx_failures;
-
- return wstats;
-
- fail_get_ordinal:
- IPW_DEBUG_WX("failed querying ordinals.\n");
-
- return (struct iw_statistics *)NULL;
-}
-
-static struct iw_handler_def ipw2100_wx_handler_def = {
- .standard = ipw2100_wx_handlers,
- .num_standard = ARRAY_SIZE(ipw2100_wx_handlers),
- .num_private = ARRAY_SIZE(ipw2100_private_handler),
- .num_private_args = ARRAY_SIZE(ipw2100_private_args),
- .private = (iw_handler *) ipw2100_private_handler,
- .private_args = (struct iw_priv_args *)ipw2100_private_args,
- .get_wireless_stats = ipw2100_wx_wireless_stats,
-};
-
-static void ipw2100_wx_event_work(struct work_struct *work)
-{
- struct ipw2100_priv *priv =
- container_of(work, struct ipw2100_priv, wx_event_work.work);
- union iwreq_data wrqu;
- int len = ETH_ALEN;
-
- if (priv->status & STATUS_STOPPING)
- return;
-
- mutex_lock(&priv->action_mutex);
-
- IPW_DEBUG_WX("enter\n");
-
- mutex_unlock(&priv->action_mutex);
-
- wrqu.ap_addr.sa_family = ARPHRD_ETHER;
-
- /* Fetch BSSID from the hardware */
- if (!(priv->status & (STATUS_ASSOCIATING | STATUS_ASSOCIATED)) ||
- priv->status & STATUS_RF_KILL_MASK ||
- ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID,
- &priv->bssid, &len)) {
- memset(wrqu.ap_addr.sa_data, 0, ETH_ALEN);
- } else {
- /* We now have the BSSID, so can finish setting to the full
- * associated state */
- memcpy(wrqu.ap_addr.sa_data, priv->bssid, ETH_ALEN);
- memcpy(priv->ieee->bssid, priv->bssid, ETH_ALEN);
- priv->status &= ~STATUS_ASSOCIATING;
- priv->status |= STATUS_ASSOCIATED;
- netif_carrier_on(priv->net_dev);
- netif_wake_queue(priv->net_dev);
- }
-
- if (!(priv->status & STATUS_ASSOCIATED)) {
- IPW_DEBUG_WX("Configuring ESSID\n");
- mutex_lock(&priv->action_mutex);
- /* This is a disassociation event, so kick the firmware to
- * look for another AP */
- if (priv->config & CFG_STATIC_ESSID)
- ipw2100_set_essid(priv, priv->essid, priv->essid_len,
- 0);
- else
- ipw2100_set_essid(priv, NULL, 0, 0);
- mutex_unlock(&priv->action_mutex);
- }
-
- wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL);
-}
-
-#define IPW2100_FW_MAJOR_VERSION 1
-#define IPW2100_FW_MINOR_VERSION 3
-
-#define IPW2100_FW_MINOR(x) ((x & 0xff) >> 8)
-#define IPW2100_FW_MAJOR(x) (x & 0xff)
-
-#define IPW2100_FW_VERSION ((IPW2100_FW_MINOR_VERSION << 8) | \
- IPW2100_FW_MAJOR_VERSION)
-
-#define IPW2100_FW_PREFIX "ipw2100-" __stringify(IPW2100_FW_MAJOR_VERSION) \
-"." __stringify(IPW2100_FW_MINOR_VERSION)
-
-#define IPW2100_FW_NAME(x) IPW2100_FW_PREFIX "" x ".fw"
-
-/*
-
-BINARY FIRMWARE HEADER FORMAT
-
-offset length desc
-0 2 version
-2 2 mode == 0:BSS,1:IBSS,2:MONITOR
-4 4 fw_len
-8 4 uc_len
-C fw_len firmware data
-12 + fw_len uc_len microcode data
-
-*/
-
-struct ipw2100_fw_header {
- short version;
- short mode;
- unsigned int fw_size;
- unsigned int uc_size;
-} __attribute__ ((packed));
-
-static int ipw2100_mod_firmware_load(struct ipw2100_fw *fw)
-{
- struct ipw2100_fw_header *h =
- (struct ipw2100_fw_header *)fw->fw_entry->data;
-
- if (IPW2100_FW_MAJOR(h->version) != IPW2100_FW_MAJOR_VERSION) {
- printk(KERN_WARNING DRV_NAME ": Firmware image not compatible "
- "(detected version id of %u). "
- "See Documentation/networking/README.ipw2100\n",
- h->version);
- return 1;
- }
-
- fw->version = h->version;
- fw->fw.data = fw->fw_entry->data + sizeof(struct ipw2100_fw_header);
- fw->fw.size = h->fw_size;
- fw->uc.data = fw->fw.data + h->fw_size;
- fw->uc.size = h->uc_size;
-
- return 0;
-}
-
-static int ipw2100_get_firmware(struct ipw2100_priv *priv,
- struct ipw2100_fw *fw)
-{
- char *fw_name;
- int rc;
-
- IPW_DEBUG_INFO("%s: Using hotplug firmware load.\n",
- priv->net_dev->name);
-
- switch (priv->ieee->iw_mode) {
- case IW_MODE_ADHOC:
- fw_name = IPW2100_FW_NAME("-i");
- break;
-#ifdef CONFIG_IPW2100_MONITOR
- case IW_MODE_MONITOR:
- fw_name = IPW2100_FW_NAME("-p");
- break;
-#endif
- case IW_MODE_INFRA:
- default:
- fw_name = IPW2100_FW_NAME("");
- break;
- }
-
- rc = request_firmware(&fw->fw_entry, fw_name, &priv->pci_dev->dev);
-
- if (rc < 0) {
- printk(KERN_ERR DRV_NAME ": "
- "%s: Firmware '%s' not available or load failed.\n",
- priv->net_dev->name, fw_name);
- return rc;
- }
- IPW_DEBUG_INFO("firmware data %p size %zd\n", fw->fw_entry->data,
- fw->fw_entry->size);
-
- ipw2100_mod_firmware_load(fw);
-
- return 0;
-}
-
-static void ipw2100_release_firmware(struct ipw2100_priv *priv,
- struct ipw2100_fw *fw)
-{
- fw->version = 0;
- if (fw->fw_entry)
- release_firmware(fw->fw_entry);
- fw->fw_entry = NULL;
-}
-
-static int ipw2100_get_fwversion(struct ipw2100_priv *priv, char *buf,
- size_t max)
-{
- char ver[MAX_FW_VERSION_LEN];
- u32 len = MAX_FW_VERSION_LEN;
- u32 tmp;
- int i;
- /* firmware version is an ascii string (max len of 14) */
- if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_FW_VER_NUM, ver, &len))
- return -EIO;
- tmp = max;
- if (len >= max)
- len = max - 1;
- for (i = 0; i < len; i++)
- buf[i] = ver[i];
- buf[i] = '\0';
- return tmp;
-}
-
-static int ipw2100_get_ucodeversion(struct ipw2100_priv *priv, char *buf,
- size_t max)
-{
- u32 ver;
- u32 len = sizeof(ver);
- /* microcode version is a 32 bit integer */
- if (ipw2100_get_ordinal(priv, IPW_ORD_UCODE_VERSION, &ver, &len))
- return -EIO;
- return snprintf(buf, max, "%08X", ver);
-}
-
-/*
- * On exit, the firmware will have been freed from the fw list
- */
-static int ipw2100_fw_download(struct ipw2100_priv *priv, struct ipw2100_fw *fw)
-{
- /* firmware is constructed of N contiguous entries, each entry is
- * structured as:
- *
- * offset sie desc
- * 0 4 address to write to
- * 4 2 length of data run
- * 6 length data
- */
- unsigned int addr;
- unsigned short len;
-
- const unsigned char *firmware_data = fw->fw.data;
- unsigned int firmware_data_left = fw->fw.size;
-
- while (firmware_data_left > 0) {
- addr = *(u32 *) (firmware_data);
- firmware_data += 4;
- firmware_data_left -= 4;
-
- len = *(u16 *) (firmware_data);
- firmware_data += 2;
- firmware_data_left -= 2;
-
- if (len > 32) {
- printk(KERN_ERR DRV_NAME ": "
- "Invalid firmware run-length of %d bytes\n",
- len);
- return -EINVAL;
- }
-
- write_nic_memory(priv->net_dev, addr, len, firmware_data);
- firmware_data += len;
- firmware_data_left -= len;
- }
-
- return 0;
-}
-
-struct symbol_alive_response {
- u8 cmd_id;
- u8 seq_num;
- u8 ucode_rev;
- u8 eeprom_valid;
- u16 valid_flags;
- u8 IEEE_addr[6];
- u16 flags;
- u16 pcb_rev;
- u16 clock_settle_time; // 1us LSB
- u16 powerup_settle_time; // 1us LSB
- u16 hop_settle_time; // 1us LSB
- u8 date[3]; // month, day, year
- u8 time[2]; // hours, minutes
- u8 ucode_valid;
-};
-
-static int ipw2100_ucode_download(struct ipw2100_priv *priv,
- struct ipw2100_fw *fw)
-{
- struct net_device *dev = priv->net_dev;
- const unsigned char *microcode_data = fw->uc.data;
- unsigned int microcode_data_left = fw->uc.size;
- void __iomem *reg = (void __iomem *)dev->base_addr;
-
- struct symbol_alive_response response;
- int i, j;
- u8 data;
-
- /* Symbol control */
- write_nic_word(dev, IPW2100_CONTROL_REG, 0x703);
- readl(reg);
- write_nic_word(dev, IPW2100_CONTROL_REG, 0x707);
- readl(reg);
-
- /* HW config */
- write_nic_byte(dev, 0x210014, 0x72); /* fifo width =16 */
- readl(reg);
- write_nic_byte(dev, 0x210014, 0x72); /* fifo width =16 */
- readl(reg);
-
- /* EN_CS_ACCESS bit to reset control store pointer */
- write_nic_byte(dev, 0x210000, 0x40);
- readl(reg);
- write_nic_byte(dev, 0x210000, 0x0);
- readl(reg);
- write_nic_byte(dev, 0x210000, 0x40);
- readl(reg);
-
- /* copy microcode from buffer into Symbol */
-
- while (microcode_data_left > 0) {
- write_nic_byte(dev, 0x210010, *microcode_data++);
- write_nic_byte(dev, 0x210010, *microcode_data++);
- microcode_data_left -= 2;
- }
-
- /* EN_CS_ACCESS bit to reset the control store pointer */
- write_nic_byte(dev, 0x210000, 0x0);
- readl(reg);
-
- /* Enable System (Reg 0)
- * first enable causes garbage in RX FIFO */
- write_nic_byte(dev, 0x210000, 0x0);
- readl(reg);
- write_nic_byte(dev, 0x210000, 0x80);
- readl(reg);
-
- /* Reset External Baseband Reg */
- write_nic_word(dev, IPW2100_CONTROL_REG, 0x703);
- readl(reg);
- write_nic_word(dev, IPW2100_CONTROL_REG, 0x707);
- readl(reg);
-
- /* HW Config (Reg 5) */
- write_nic_byte(dev, 0x210014, 0x72); // fifo width =16
- readl(reg);
- write_nic_byte(dev, 0x210014, 0x72); // fifo width =16
- readl(reg);
-
- /* Enable System (Reg 0)
- * second enable should be OK */
- write_nic_byte(dev, 0x210000, 0x00); // clear enable system
- readl(reg);
- write_nic_byte(dev, 0x210000, 0x80); // set enable system
-
- /* check Symbol is enabled - upped this from 5 as it wasn't always
- * catching the update */
- for (i = 0; i < 10; i++) {
- udelay(10);
-
- /* check Dino is enabled bit */
- read_nic_byte(dev, 0x210000, &data);
- if (data & 0x1)
- break;
- }
-
- if (i == 10) {
- printk(KERN_ERR DRV_NAME ": %s: Error initializing Symbol\n",
- dev->name);
- return -EIO;
- }
-
- /* Get Symbol alive response */
- for (i = 0; i < 30; i++) {
- /* Read alive response structure */
- for (j = 0;
- j < (sizeof(struct symbol_alive_response) >> 1); j++)
- read_nic_word(dev, 0x210004, ((u16 *) & response) + j);
-
- if ((response.cmd_id == 1) && (response.ucode_valid == 0x1))
- break;
- udelay(10);
- }
-
- if (i == 30) {
- printk(KERN_ERR DRV_NAME
- ": %s: No response from Symbol - hw not alive\n",
- dev->name);
- printk_buf(IPW_DL_ERROR, (u8 *) & response, sizeof(response));
- return -EIO;
- }
-
- return 0;
-}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff