#define PRISM2_PCCARD
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/if.h>
#include "hostap_wlan.h"
-static char *version = PRISM2_VERSION " (Jouni Malinen <jkmaline@cc.hut.fi>)";
static dev_info_t dev_info = "hostap_cs";
-static dev_link_t *dev_list = NULL;
MODULE_AUTHOR("Jouni Malinen");
MODULE_DESCRIPTION("Support for Intersil Prism2-based 802.11 wireless LAN "
"cards (PC Card).");
MODULE_SUPPORTED_DEVICE("Intersil Prism2-based WLAN cards (PC Card)");
MODULE_LICENSE("GPL");
-MODULE_VERSION(PRISM2_VERSION);
static int ignore_cis_vcc;
/* struct local_info::hw_priv */
struct hostap_cs_priv {
dev_node_t node;
- dev_link_t *link;
+ struct pcmcia_device *link;
int sandisk_connectplus;
};
-static void prism2_detach(dev_link_t *link);
+static void prism2_detach(struct pcmcia_device *p_dev);
static void prism2_release(u_long arg);
-static int prism2_event(event_t event, int priority,
- event_callback_args_t *args);
+static int prism2_config(struct pcmcia_device *link);
static int prism2_pccard_card_present(local_info_t *local)
{
struct hostap_cs_priv *hw_priv = local->hw_priv;
- if (hw_priv->link != NULL &&
- ((hw_priv->link->state & (DEV_PRESENT | DEV_CONFIG)) ==
- (DEV_PRESENT | DEV_CONFIG)))
+ if (hw_priv != NULL && hw_priv->link != NULL && pcmcia_dev_present(hw_priv->link))
return 1;
return 0;
}
reg.Action = CS_WRITE;
reg.Offset = 0x10; /* 0x3f0 IO base 1 */
reg.Value = hw_priv->link->io.BasePort1 & 0x00ff;
- res = pcmcia_access_configuration_register(hw_priv->link->handle,
+ res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 0 -"
" res=%d\n", res);
}
reg.Action = CS_WRITE;
reg.Offset = 0x12; /* 0x3f2 IO base 2 */
reg.Value = (hw_priv->link->io.BasePort1 & 0xff00) >> 8;
- res = pcmcia_access_configuration_register(hw_priv->link->handle,
+ res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 1 -"
" res=%d\n", res);
}
{
int res, ret = 0;
conf_reg_t reg;
- struct hostap_interface *iface = dev->priv;
+ struct hostap_interface *iface = netdev_priv(dev);
local_info_t *local = iface->local;
- tuple_t tuple;
- cisparse_t *parse = NULL;
- u_char buf[64];
struct hostap_cs_priv *hw_priv = local->hw_priv;
if (hw_priv->link->io.NumPorts1 < 0x42) {
goto done;
}
- parse = kmalloc(sizeof(cisparse_t), GFP_KERNEL);
- if (parse == NULL) {
- ret = -ENOMEM;
- goto done;
- }
-
- tuple.DesiredTuple = CISTPL_MANFID;
- tuple.Attributes = TUPLE_RETURN_COMMON;
- tuple.TupleData = buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
- if (pcmcia_get_first_tuple(hw_priv->link->handle, &tuple) ||
- pcmcia_get_tuple_data(hw_priv->link->handle, &tuple) ||
- pcmcia_parse_tuple(hw_priv->link->handle, &tuple, parse) ||
- parse->manfid.manf != 0xd601 || parse->manfid.card != 0x0101) {
+ if (hw_priv->link->manf_id != 0xd601 || hw_priv->link->card_id != 0x0101) {
/* No SanDisk manfid found */
ret = -ENODEV;
goto done;
}
- tuple.DesiredTuple = CISTPL_LONGLINK_MFC;
- if (pcmcia_get_first_tuple(hw_priv->link->handle, &tuple) ||
- pcmcia_get_tuple_data(hw_priv->link->handle, &tuple) ||
- pcmcia_parse_tuple(hw_priv->link->handle, &tuple, parse) ||
- parse->longlink_mfc.nfn < 2) {
+ if (hw_priv->link->socket->functions < 2) {
/* No multi-function links found */
ret = -ENODEV;
goto done;
reg.Action = CS_WRITE;
reg.Offset = CISREG_COR;
reg.Value = COR_SOFT_RESET;
- res = pcmcia_access_configuration_register(hw_priv->link->handle,
+ res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n",
dev->name, res);
goto done;
* will be enabled during the first cor_sreset call.
*/
reg.Value = COR_LEVEL_REQ | 0x8 | COR_ADDR_DECODE | COR_FUNC_ENA;
- res = pcmcia_access_configuration_register(hw_priv->link->handle,
+ res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n",
dev->name, res);
goto done;
udelay(10);
done:
- kfree(parse);
return ret;
}
reg.Action = CS_READ;
reg.Offset = CISREG_COR;
reg.Value = 0;
- res = pcmcia_access_configuration_register(hw_priv->link->handle,
+ res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 1 (%d)\n",
res);
return;
reg.Action = CS_WRITE;
reg.Value |= COR_SOFT_RESET;
- res = pcmcia_access_configuration_register(hw_priv->link->handle,
+ res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 2 (%d)\n",
res);
return;
reg.Value &= ~COR_SOFT_RESET;
if (hw_priv->sandisk_connectplus)
reg.Value |= COR_IREQ_ENA;
- res = pcmcia_access_configuration_register(hw_priv->link->handle,
+ res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 3 (%d)\n",
res);
return;
reg.Action = CS_READ;
reg.Offset = CISREG_COR;
reg.Value = 0;
- res = pcmcia_access_configuration_register(hw_priv->link->handle,
+ res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 1 "
"(%d)\n", res);
return;
reg.Action = CS_WRITE;
reg.Value |= COR_SOFT_RESET;
- res = pcmcia_access_configuration_register(hw_priv->link->handle,
+ res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 2 "
"(%d)\n", res);
return;
reg.Action = CS_WRITE;
reg.Value = hcr;
reg.Offset = CISREG_CCSR;
- res = pcmcia_access_configuration_register(hw_priv->link->handle,
+ res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 3 "
"(%d)\n", res);
return;
reg.Action = CS_WRITE;
reg.Offset = CISREG_COR;
reg.Value = old_cor & ~COR_SOFT_RESET;
- res = pcmcia_access_configuration_register(hw_priv->link->handle,
+ res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 4 "
"(%d)\n", res);
return;
}
-static int prism2_pccard_dev_open(local_info_t *local)
-{
- struct hostap_cs_priv *hw_priv = local->hw_priv;
- hw_priv->link->open++;
- return 0;
-}
-
-
-static int prism2_pccard_dev_close(local_info_t *local)
-{
- struct hostap_cs_priv *hw_priv;
-
- if (local == NULL || local->hw_priv == NULL)
- return 1;
- hw_priv = local->hw_priv;
- if (hw_priv->link == NULL)
- return 1;
-
- if (!hw_priv->link->open) {
- printk(KERN_WARNING "%s: prism2_pccard_dev_close(): "
- "link not open?!\n", local->dev->name);
- return 1;
- }
-
- hw_priv->link->open--;
-
- return 0;
-}
-
-
static struct prism2_helper_functions prism2_pccard_funcs =
{
.card_present = prism2_pccard_card_present,
.cor_sreset = prism2_pccard_cor_sreset,
- .dev_open = prism2_pccard_dev_open,
- .dev_close = prism2_pccard_dev_close,
.genesis_reset = prism2_pccard_genesis_reset,
.hw_type = HOSTAP_HW_PCCARD,
};
/* allocate local data and register with CardServices
* initialize dev_link structure, but do not configure the card yet */
-static dev_link_t *prism2_attach(void)
+static int hostap_cs_probe(struct pcmcia_device *p_dev)
{
- dev_link_t *link;
- client_reg_t client_reg;
int ret;
- link = kmalloc(sizeof(dev_link_t), GFP_KERNEL);
- if (link == NULL)
- return NULL;
-
- memset(link, 0, sizeof(dev_link_t));
-
PDEBUG(DEBUG_HW, "%s: setting Vcc=33 (constant)\n", dev_info);
- link->conf.Vcc = 33;
- link->conf.IntType = INT_MEMORY_AND_IO;
-
- /* register with CardServices */
- link->next = dev_list;
- dev_list = link;
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret != CS_SUCCESS) {
- cs_error(link->handle, RegisterClient, ret);
- prism2_detach(link);
- return NULL;
+ p_dev->conf.IntType = INT_MEMORY_AND_IO;
+
+ ret = prism2_config(p_dev);
+ if (ret) {
+ PDEBUG(DEBUG_EXTRA, "prism2_config() failed\n");
}
- return link;
+
+ return ret;
}
-static void prism2_detach(dev_link_t *link)
+static void prism2_detach(struct pcmcia_device *link)
{
- dev_link_t **linkp;
-
PDEBUG(DEBUG_FLOW, "prism2_detach\n");
- for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
- if (*linkp == link)
- break;
- if (*linkp == NULL) {
- printk(KERN_WARNING "%s: Attempt to detach non-existing "
- "PCMCIA client\n", dev_info);
- return;
- }
-
- if (link->state & DEV_CONFIG) {
- prism2_release((u_long)link);
- }
-
- if (link->handle) {
- int res = pcmcia_deregister_client(link->handle);
- if (res) {
- printk("CardService(DeregisterClient) => %d\n", res);
- cs_error(link->handle, DeregisterClient, res);
- }
- }
+ prism2_release((u_long)link);
- *linkp = link->next;
/* release net devices */
if (link->priv) {
+ struct hostap_cs_priv *hw_priv;
struct net_device *dev;
struct hostap_interface *iface;
dev = link->priv;
iface = netdev_priv(dev);
- kfree(iface->local->hw_priv);
- iface->local->hw_priv = NULL;
+ hw_priv = iface->local->hw_priv;
prism2_free_local_data(dev);
+ kfree(hw_priv);
}
- kfree(link);
}
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
+/* run after a CARD_INSERTION event is received to configure the PCMCIA
+ * socket and make the device available to the system */
+
+static int prism2_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ if (cfg->index == 0)
+ return -ENODEV;
+
+ PDEBUG(DEBUG_EXTRA, "Checking CFTABLE_ENTRY 0x%02X "
+ "(default 0x%02X)\n", cfg->index, dflt->index);
-#define CFG_CHECK2(fn, retf) \
-do { int ret = (retf); \
-if (ret != 0) { \
- PDEBUG(DEBUG_EXTRA, "CardServices(" #fn ") returned %d\n", ret); \
- cs_error(link->handle, fn, ret); \
- goto next_entry; \
-} \
-} while (0)
+ /* Does this card need audio output? */
+ if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+ p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
+ p_dev->conf.Status = CCSR_AUDIO_ENA;
+ }
+ /* Use power settings for Vcc and Vpp if present */
+ /* Note that the CIS values need to be rescaled */
+ if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] /
+ 10000 && !ignore_cis_vcc) {
+ PDEBUG(DEBUG_EXTRA, " Vcc mismatch - skipping"
+ " this entry\n");
+ return -ENODEV;
+ }
+ } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] /
+ 10000 && !ignore_cis_vcc) {
+ PDEBUG(DEBUG_EXTRA, " Vcc (default) mismatch "
+ "- skipping this entry\n");
+ return -ENODEV;
+ }
+ }
-/* run after a CARD_INSERTION event is received to configure the PCMCIA
- * socket and make the device available to the system */
-static int prism2_config(dev_link_t *link)
+ if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+ else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+
+ /* Do we need to allocate an interrupt? */
+ if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+ else if (!(p_dev->conf.Attributes & CONF_ENABLE_IRQ)) {
+ /* At least Compaq WL200 does not have IRQInfo1 set,
+ * but it does not work without interrupts.. */
+ printk(KERN_WARNING "Config has no IRQ info, but trying to "
+ "enable IRQ anyway..\n");
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+ }
+
+ /* IO window settings */
+ PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d "
+ "dflt->io.nwin=%d\n",
+ cfg->io.nwin, dflt->io.nwin);
+ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+ PDEBUG(DEBUG_EXTRA, "io->flags = 0x%04X, "
+ "io.base=0x%04x, len=%d\n", io->flags,
+ io->win[0].base, io->win[0].len);
+ if (!(io->flags & CISTPL_IO_8BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ if (!(io->flags & CISTPL_IO_16BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ p_dev->io.IOAddrLines = io->flags &
+ CISTPL_IO_LINES_MASK;
+ p_dev->io.BasePort1 = io->win[0].base;
+ p_dev->io.NumPorts1 = io->win[0].len;
+ if (io->nwin > 1) {
+ p_dev->io.Attributes2 = p_dev->io.Attributes1;
+ p_dev->io.BasePort2 = io->win[1].base;
+ p_dev->io.NumPorts2 = io->win[1].len;
+ }
+ }
+
+ /* This reserves IO space but doesn't actually enable it */
+ return pcmcia_request_io(p_dev, &p_dev->io);
+}
+
+static int prism2_config(struct pcmcia_device *link)
{
struct net_device *dev;
struct hostap_interface *iface;
local_info_t *local;
int ret = 1;
- tuple_t tuple;
- cisparse_t *parse;
- int last_fn, last_ret;
- u_char buf[64];
- config_info_t conf;
- cistpl_cftable_entry_t dflt = { 0 };
struct hostap_cs_priv *hw_priv;
PDEBUG(DEBUG_FLOW, "prism2_config()\n");
- parse = kmalloc(sizeof(cisparse_t), GFP_KERNEL);
- hw_priv = kmalloc(sizeof(*hw_priv), GFP_KERNEL);
- if (parse == NULL || hw_priv == NULL) {
- kfree(parse);
- kfree(hw_priv);
+ hw_priv = kzalloc(sizeof(*hw_priv), GFP_KERNEL);
+ if (hw_priv == NULL) {
ret = -ENOMEM;
goto failed;
}
- memset(hw_priv, 0, sizeof(*hw_priv));
-
- tuple.DesiredTuple = CISTPL_CONFIG;
- tuple.Attributes = 0;
- tuple.TupleData = buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link->handle, &tuple));
- CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link->handle, &tuple));
- CS_CHECK(ParseTuple, pcmcia_parse_tuple(link->handle, &tuple, parse));
- link->conf.ConfigBase = parse->config.base;
- link->conf.Present = parse->config.rmask[0];
-
- CS_CHECK(GetConfigurationInfo,
- pcmcia_get_configuration_info(link->handle, &conf));
- PDEBUG(DEBUG_HW, "%s: %s Vcc=%d (from config)\n", dev_info,
- ignore_cis_vcc ? "ignoring" : "setting", conf.Vcc);
- link->conf.Vcc = conf.Vcc;
/* Look for an appropriate configuration table entry in the CIS */
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link->handle, &tuple));
- for (;;) {
- cistpl_cftable_entry_t *cfg = &(parse->cftable_entry);
- CFG_CHECK2(GetTupleData,
- pcmcia_get_tuple_data(link->handle, &tuple));
- CFG_CHECK2(ParseTuple,
- pcmcia_parse_tuple(link->handle, &tuple, parse));
-
- if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
- dflt = *cfg;
- if (cfg->index == 0)
- goto next_entry;
- link->conf.ConfigIndex = cfg->index;
- PDEBUG(DEBUG_EXTRA, "Checking CFTABLE_ENTRY 0x%02X "
- "(default 0x%02X)\n", cfg->index, dflt.index);
-
- /* Does this card need audio output? */
- if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
- link->conf.Attributes |= CONF_ENABLE_SPKR;
- link->conf.Status = CCSR_AUDIO_ENA;
- }
-
- /* Use power settings for Vcc and Vpp if present */
- /* Note that the CIS values need to be rescaled */
- if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] /
- 10000 && !ignore_cis_vcc) {
- PDEBUG(DEBUG_EXTRA, " Vcc mismatch - skipping"
- " this entry\n");
- goto next_entry;
- }
- } else if (dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM] /
- 10000 && !ignore_cis_vcc) {
- PDEBUG(DEBUG_EXTRA, " Vcc (default) mismatch "
- "- skipping this entry\n");
- goto next_entry;
- }
- }
-
- if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp1 = link->conf.Vpp2 =
- cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
- else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp1 = link->conf.Vpp2 =
- dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
-
- /* Do we need to allocate an interrupt? */
- if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
- link->conf.Attributes |= CONF_ENABLE_IRQ;
- else if (!(link->conf.Attributes & CONF_ENABLE_IRQ)) {
- /* At least Compaq WL200 does not have IRQInfo1 set,
- * but it does not work without interrupts.. */
- printk("Config has no IRQ info, but trying to enable "
- "IRQ anyway..\n");
- link->conf.Attributes |= CONF_ENABLE_IRQ;
- }
-
- /* IO window settings */
- PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d "
- "dflt.io.nwin=%d\n",
- cfg->io.nwin, dflt.io.nwin);
- link->io.NumPorts1 = link->io.NumPorts2 = 0;
- if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
- cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- PDEBUG(DEBUG_EXTRA, "io->flags = 0x%04X, "
- "io.base=0x%04x, len=%d\n", io->flags,
- io->win[0].base, io->win[0].len);
- if (!(io->flags & CISTPL_IO_8BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.IOAddrLines = io->flags &
- CISTPL_IO_LINES_MASK;
- link->io.BasePort1 = io->win[0].base;
- link->io.NumPorts1 = io->win[0].len;
- if (io->nwin > 1) {
- link->io.Attributes2 = link->io.Attributes1;
- link->io.BasePort2 = io->win[1].base;
- link->io.NumPorts2 = io->win[1].len;
- }
- }
-
- /* This reserves IO space but doesn't actually enable it */
- CFG_CHECK2(RequestIO,
- pcmcia_request_io(link->handle, &link->io));
-
- /* This configuration table entry is OK */
- break;
-
- next_entry:
- CS_CHECK(GetNextTuple,
- pcmcia_get_next_tuple(link->handle, &tuple));
+ ret = pcmcia_loop_config(link, prism2_config_check, NULL);
+ if (ret) {
+ if (!ignore_cis_vcc)
+ printk(KERN_ERR "GetNextTuple(): No matching "
+ "CIS configuration. Maybe you need the "
+ "ignore_cis_vcc=1 parameter.\n");
+ goto failed;
}
/* Need to allocate net_device before requesting IRQ handler */
dev = prism2_init_local_data(&prism2_pccard_funcs, 0,
- &handle_to_dev(link->handle));
+ &link->dev);
if (dev == NULL)
goto failed;
link->priv = dev;
+ iface = netdev_priv(dev);
+ local = iface->local;
+ local->hw_priv = hw_priv;
+ hw_priv->link = link;
+ strcpy(hw_priv->node.dev_name, dev->name);
+ link->dev_node = &hw_priv->node;
+
/*
* Allocate an interrupt line. Note that this does not assign a
* handler to the interrupt, unless the 'Handler' member of the
* irq structure is initialized.
*/
if (link->conf.Attributes & CONF_ENABLE_IRQ) {
- link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
- link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+ link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->irq.Handler = prism2_interrupt;
- link->irq.Instance = dev;
- CS_CHECK(RequestIRQ,
- pcmcia_request_irq(link->handle, &link->irq));
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
}
/*
* the I/O windows and the interrupt mapping, and putting the
* card and host interface into "Memory and IO" mode.
*/
- CS_CHECK(RequestConfiguration,
- pcmcia_request_configuration(link->handle, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
dev->irq = link->irq.AssignedIRQ;
dev->base_addr = link->io.BasePort1;
/* Finally, report what we've done */
- printk(KERN_INFO "%s: index 0x%02x: Vcc %d.%d",
- dev_info, link->conf.ConfigIndex,
- link->conf.Vcc / 10, link->conf.Vcc % 10);
- if (link->conf.Vpp1)
- printk(", Vpp %d.%d", link->conf.Vpp1 / 10,
- link->conf.Vpp1 % 10);
+ printk(KERN_INFO "%s: index 0x%02x: ",
+ dev_info, link->conf.ConfigIndex);
+ if (link->conf.Vpp)
+ printk(", Vpp %d.%d", link->conf.Vpp / 10,
+ link->conf.Vpp % 10);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
printk(", irq %d", link->irq.AssignedIRQ);
if (link->io.NumPorts1)
link->io.BasePort2+link->io.NumPorts2-1);
printk("\n");
- link->state |= DEV_CONFIG;
- link->state &= ~DEV_CONFIG_PENDING;
-
- iface = netdev_priv(dev);
- local = iface->local;
- local->hw_priv = hw_priv;
- hw_priv->link = link;
- strcpy(hw_priv->node.dev_name, dev->name);
- link->dev = &hw_priv->node;
-
local->shutdown = 0;
sandisk_enable_wireless(dev);
if (ret == 0 && local->ddev)
strcpy(hw_priv->node.dev_name, local->ddev->name);
}
- kfree(parse);
return ret;
- cs_failed:
- cs_error(link->handle, last_fn, last_ret);
-
failed:
- kfree(parse);
kfree(hw_priv);
prism2_release((u_long)link);
return ret;
static void prism2_release(u_long arg)
{
- dev_link_t *link = (dev_link_t *)arg;
+ struct pcmcia_device *link = (struct pcmcia_device *)arg;
PDEBUG(DEBUG_FLOW, "prism2_release\n");
struct hostap_interface *iface;
iface = netdev_priv(dev);
- if (link->state & DEV_CONFIG)
- prism2_hw_shutdown(dev, 0);
+ prism2_hw_shutdown(dev, 0);
iface->local->shutdown = 1;
}
- if (link->win)
- pcmcia_release_window(link->win);
- pcmcia_release_configuration(link->handle);
- if (link->io.NumPorts1)
- pcmcia_release_io(link->handle, &link->io);
- if (link->irq.AssignedIRQ)
- pcmcia_release_irq(link->handle, &link->irq);
-
- link->state &= ~DEV_CONFIG;
-
+ pcmcia_disable_device(link);
PDEBUG(DEBUG_FLOW, "release - done\n");
}
-
-static int prism2_event(event_t event, int priority,
- event_callback_args_t *args)
+static int hostap_cs_suspend(struct pcmcia_device *link)
{
- dev_link_t *link = args->client_data;
struct net_device *dev = (struct net_device *) link->priv;
+ int dev_open = 0;
+ struct hostap_interface *iface = NULL;
- switch (event) {
- case CS_EVENT_CARD_INSERTION:
- PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_CARD_INSERTION\n", dev_info);
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- if (prism2_config(link)) {
- PDEBUG(DEBUG_EXTRA, "prism2_config() failed\n");
- }
- break;
-
- case CS_EVENT_CARD_REMOVAL:
- PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_CARD_REMOVAL\n", dev_info);
- link->state &= ~DEV_PRESENT;
- if (link->state & DEV_CONFIG) {
- netif_stop_queue(dev);
- netif_device_detach(dev);
- prism2_release((u_long) link);
- }
- break;
-
- case CS_EVENT_PM_SUSPEND:
- PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_PM_SUSPEND\n", dev_info);
- link->state |= DEV_SUSPEND;
- /* fall through */
-
- case CS_EVENT_RESET_PHYSICAL:
- PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_RESET_PHYSICAL\n", dev_info);
- if (link->state & DEV_CONFIG) {
- if (link->open) {
- netif_stop_queue(dev);
- netif_device_detach(dev);
- }
- prism2_suspend(dev);
- pcmcia_release_configuration(link->handle);
- }
- break;
-
- case CS_EVENT_PM_RESUME:
- PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_PM_RESUME\n", dev_info);
- link->state &= ~DEV_SUSPEND;
- /* fall through */
-
- case CS_EVENT_CARD_RESET:
- PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_CARD_RESET\n", dev_info);
- if (link->state & DEV_CONFIG) {
- pcmcia_request_configuration(link->handle,
- &link->conf);
- prism2_hw_shutdown(dev, 1);
- prism2_hw_config(dev, link->open ? 0 : 1);
- if (link->open) {
- netif_device_attach(dev);
- netif_start_queue(dev);
- }
- }
- break;
+ if (!dev)
+ return -ENODEV;
+
+ iface = netdev_priv(dev);
- default:
- PDEBUG(DEBUG_EXTRA, "%s: prism2_event() - unknown event %d\n",
- dev_info, event);
- break;
+ PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_PM_SUSPEND\n", dev_info);
+ if (iface && iface->local)
+ dev_open = iface->local->num_dev_open > 0;
+ if (dev_open) {
+ netif_stop_queue(dev);
+ netif_device_detach(dev);
}
+ prism2_suspend(dev);
+
return 0;
}
+static int hostap_cs_resume(struct pcmcia_device *link)
+{
+ struct net_device *dev = (struct net_device *) link->priv;
+ int dev_open = 0;
+ struct hostap_interface *iface = NULL;
+
+ if (!dev)
+ return -ENODEV;
+
+ iface = netdev_priv(dev);
+
+ PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_PM_RESUME\n", dev_info);
+
+ if (iface && iface->local)
+ dev_open = iface->local->num_dev_open > 0;
+
+ prism2_hw_shutdown(dev, 1);
+ prism2_hw_config(dev, dev_open ? 0 : 1);
+ if (dev_open) {
+ netif_device_attach(dev);
+ netif_start_queue(dev);
+ }
+
+ return 0;
+}
static struct pcmcia_device_id hostap_cs_ids[] = {
PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100),
PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777),
PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000),
PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002),
- PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002),
+ PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x3301),
PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002),
PCMCIA_DEVICE_MANF_CARD(0x026f, 0x030b),
PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612),
PCMCIA_DEVICE_MANF_CARD(0x02d2, 0x0001),
PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x0001),
PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300),
- PCMCIA_DEVICE_MANF_CARD(0xc00f, 0x0000),
+/* PCMCIA_DEVICE_MANF_CARD(0xc00f, 0x0000), conflict with pcnet_cs */
+ PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002),
PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002),
PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005),
PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0010),
+ PCMCIA_DEVICE_MANF_CARD(0x0126, 0x0002),
+ PCMCIA_DEVICE_MANF_CARD_PROD_ID1(0xd601, 0x0005, "ADLINK 345 CF",
+ 0x2d858104),
+ PCMCIA_DEVICE_MANF_CARD_PROD_ID1(0x0156, 0x0002, "INTERSIL",
+ 0x74c5e40d),
+ PCMCIA_DEVICE_MANF_CARD_PROD_ID1(0x0156, 0x0002, "Intersil",
+ 0x4b801a17),
PCMCIA_MFC_DEVICE_PROD_ID12(0, "SanDisk", "ConnectPlus",
0x7a954bd9, 0x74be00c6),
- PCMCIA_DEVICE_PROD_ID1234(
- "Intersil", "PRISM 2_5 PCMCIA ADAPTER", "ISL37300P",
- "Eval-RevA",
- 0x4b801a17, 0x6345a0bf, 0xc9049a39, 0xc23adc0e),
PCMCIA_DEVICE_PROD_ID123(
"Addtron", "AWP-100 Wireless PCMCIA", "Version 01.02",
0xe6ec52ce, 0x08649af2, 0x4b74baa0),
PCMCIA_DEVICE_PROD_ID12(
"ZoomAir 11Mbps High", "Rate wireless Networking",
0x273fe3db, 0x32a1eaee),
+ PCMCIA_DEVICE_PROD_ID123(
+ "Pretec", "CompactWLAN Card 802.11b", "2.5",
+ 0x1cadd3e5, 0xe697636c, 0x7a5bfcf1),
+ PCMCIA_DEVICE_PROD_ID123(
+ "U.S. Robotics", "IEEE 802.11b PC-CARD", "Version 01.02",
+ 0xc7b8df9d, 0x1700d087, 0x4b74baa0),
+ PCMCIA_DEVICE_PROD_ID123(
+ "Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio",
+ "Ver. 1.00",
+ 0x5cd01705, 0x4271660f, 0x9d08ee12),
+ PCMCIA_DEVICE_PROD_ID123(
+ "Wireless LAN" , "11Mbps PC Card", "Version 01.02",
+ 0x4b8870ff, 0x70e946d1, 0x4b74baa0),
+ PCMCIA_DEVICE_PROD_ID3("HFA3863", 0x355cb092),
+ PCMCIA_DEVICE_PROD_ID3("ISL37100P", 0x630d52b2),
+ PCMCIA_DEVICE_PROD_ID3("ISL37101P-10", 0xdd97a26b),
+ PCMCIA_DEVICE_PROD_ID3("ISL37300P", 0xc9049a39),
PCMCIA_DEVICE_NULL
};
MODULE_DEVICE_TABLE(pcmcia, hostap_cs_ids);
.drv = {
.name = "hostap_cs",
},
- .attach = prism2_attach,
- .detach = prism2_detach,
+ .probe = hostap_cs_probe,
+ .remove = prism2_detach,
.owner = THIS_MODULE,
- .event = prism2_event,
.id_table = hostap_cs_ids,
+ .suspend = hostap_cs_suspend,
+ .resume = hostap_cs_resume,
};
static int __init init_prism2_pccard(void)
{
- printk(KERN_INFO "%s: %s\n", dev_info, version);
return pcmcia_register_driver(&hostap_driver);
}
static void __exit exit_prism2_pccard(void)
{
pcmcia_unregister_driver(&hostap_driver);
- printk(KERN_INFO "%s: Driver unloaded\n", dev_info);
}