reg.Value = hw_priv->link->io.BasePort1 & 0x00ff;
res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 0 -"
" res=%d\n", res);
}
reg.Value = (hw_priv->link->io.BasePort1 & 0xff00) >> 8;
res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 1 -"
" res=%d\n", res);
}
conf_reg_t reg;
struct hostap_interface *iface = netdev_priv(dev);
local_info_t *local = iface->local;
- tuple_t tuple;
- cisparse_t *parse = NULL;
- u_char buf[64];
struct hostap_cs_priv *hw_priv = local->hw_priv;
if (hw_priv->link->io.NumPorts1 < 0x42) {
goto done;
}
- parse = kmalloc(sizeof(cisparse_t), GFP_KERNEL);
- if (parse == NULL) {
- ret = -ENOMEM;
- goto done;
- }
-
- tuple.Attributes = TUPLE_RETURN_COMMON;
- tuple.TupleData = buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
-
if (hw_priv->link->manf_id != 0xd601 || hw_priv->link->card_id != 0x0101) {
/* No SanDisk manfid found */
ret = -ENODEV;
goto done;
}
- tuple.DesiredTuple = CISTPL_LONGLINK_MFC;
- if (pcmcia_get_first_tuple(hw_priv->link, &tuple) ||
- pcmcia_get_tuple_data(hw_priv->link, &tuple) ||
- pcmcia_parse_tuple(hw_priv->link, &tuple, parse) ||
- parse->longlink_mfc.nfn < 2) {
+ if (hw_priv->link->socket->functions < 2) {
/* No multi-function links found */
ret = -ENODEV;
goto done;
reg.Value = COR_SOFT_RESET;
res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n",
dev->name, res);
goto done;
reg.Value = COR_LEVEL_REQ | 0x8 | COR_ADDR_DECODE | COR_FUNC_ENA;
res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n",
dev->name, res);
goto done;
udelay(10);
done:
- kfree(parse);
return ret;
}
reg.Value = 0;
res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 1 (%d)\n",
res);
return;
reg.Value |= COR_SOFT_RESET;
res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 2 (%d)\n",
res);
return;
reg.Value |= COR_IREQ_ENA;
res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 3 (%d)\n",
res);
return;
reg.Value = 0;
res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 1 "
"(%d)\n", res);
return;
reg.Value |= COR_SOFT_RESET;
res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 2 "
"(%d)\n", res);
return;
reg.Offset = CISREG_CCSR;
res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 3 "
"(%d)\n", res);
return;
reg.Value = old_cor & ~COR_SOFT_RESET;
res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 4 "
"(%d)\n", res);
return;
}
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
+/* run after a CARD_INSERTION event is received to configure the PCMCIA
+ * socket and make the device available to the system */
+
+static int prism2_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ if (cfg->index == 0)
+ return -ENODEV;
-#define CFG_CHECK2(fn, retf) \
-do { int ret = (retf); \
-if (ret != 0) { \
- PDEBUG(DEBUG_EXTRA, "CardServices(" #fn ") returned %d\n", ret); \
- cs_error(link, fn, ret); \
- goto next_entry; \
-} \
-} while (0)
+ PDEBUG(DEBUG_EXTRA, "Checking CFTABLE_ENTRY 0x%02X "
+ "(default 0x%02X)\n", cfg->index, dflt->index);
+ /* Does this card need audio output? */
+ if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+ p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
+ p_dev->conf.Status = CCSR_AUDIO_ENA;
+ }
+
+ /* Use power settings for Vcc and Vpp if present */
+ /* Note that the CIS values need to be rescaled */
+ if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] /
+ 10000 && !ignore_cis_vcc) {
+ PDEBUG(DEBUG_EXTRA, " Vcc mismatch - skipping"
+ " this entry\n");
+ return -ENODEV;
+ }
+ } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] /
+ 10000 && !ignore_cis_vcc) {
+ PDEBUG(DEBUG_EXTRA, " Vcc (default) mismatch "
+ "- skipping this entry\n");
+ return -ENODEV;
+ }
+ }
+
+ if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+ else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+
+ /* Do we need to allocate an interrupt? */
+ if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+ else if (!(p_dev->conf.Attributes & CONF_ENABLE_IRQ)) {
+ /* At least Compaq WL200 does not have IRQInfo1 set,
+ * but it does not work without interrupts.. */
+ printk(KERN_WARNING "Config has no IRQ info, but trying to "
+ "enable IRQ anyway..\n");
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+ }
+
+ /* IO window settings */
+ PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d "
+ "dflt->io.nwin=%d\n",
+ cfg->io.nwin, dflt->io.nwin);
+ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+ PDEBUG(DEBUG_EXTRA, "io->flags = 0x%04X, "
+ "io.base=0x%04x, len=%d\n", io->flags,
+ io->win[0].base, io->win[0].len);
+ if (!(io->flags & CISTPL_IO_8BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ if (!(io->flags & CISTPL_IO_16BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ p_dev->io.IOAddrLines = io->flags &
+ CISTPL_IO_LINES_MASK;
+ p_dev->io.BasePort1 = io->win[0].base;
+ p_dev->io.NumPorts1 = io->win[0].len;
+ if (io->nwin > 1) {
+ p_dev->io.Attributes2 = p_dev->io.Attributes1;
+ p_dev->io.BasePort2 = io->win[1].base;
+ p_dev->io.NumPorts2 = io->win[1].len;
+ }
+ }
+
+ /* This reserves IO space but doesn't actually enable it */
+ return pcmcia_request_io(p_dev, &p_dev->io);
+}
-/* run after a CARD_INSERTION event is received to configure the PCMCIA
- * socket and make the device available to the system */
static int prism2_config(struct pcmcia_device *link)
{
struct net_device *dev;
struct hostap_interface *iface;
local_info_t *local;
int ret = 1;
- tuple_t tuple;
- cisparse_t *parse;
- int last_fn, last_ret;
- u_char buf[64];
- config_info_t conf;
- cistpl_cftable_entry_t dflt = { 0 };
struct hostap_cs_priv *hw_priv;
PDEBUG(DEBUG_FLOW, "prism2_config()\n");
- parse = kmalloc(sizeof(cisparse_t), GFP_KERNEL);
hw_priv = kzalloc(sizeof(*hw_priv), GFP_KERNEL);
- if (parse == NULL || hw_priv == NULL) {
+ if (hw_priv == NULL) {
ret = -ENOMEM;
goto failed;
}
- tuple.Attributes = 0;
- tuple.TupleData = buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
-
- CS_CHECK(GetConfigurationInfo,
- pcmcia_get_configuration_info(link, &conf));
-
/* Look for an appropriate configuration table entry in the CIS */
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- for (;;) {
- cistpl_cftable_entry_t *cfg = &(parse->cftable_entry);
- CFG_CHECK2(GetTupleData,
- pcmcia_get_tuple_data(link, &tuple));
- CFG_CHECK2(ParseTuple,
- pcmcia_parse_tuple(link, &tuple, parse));
-
- if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
- dflt = *cfg;
- if (cfg->index == 0)
- goto next_entry;
- link->conf.ConfigIndex = cfg->index;
- PDEBUG(DEBUG_EXTRA, "Checking CFTABLE_ENTRY 0x%02X "
- "(default 0x%02X)\n", cfg->index, dflt.index);
-
- /* Does this card need audio output? */
- if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
- link->conf.Attributes |= CONF_ENABLE_SPKR;
- link->conf.Status = CCSR_AUDIO_ENA;
- }
-
- /* Use power settings for Vcc and Vpp if present */
- /* Note that the CIS values need to be rescaled */
- if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] /
- 10000 && !ignore_cis_vcc) {
- PDEBUG(DEBUG_EXTRA, " Vcc mismatch - skipping"
- " this entry\n");
- goto next_entry;
- }
- } else if (dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM] /
- 10000 && !ignore_cis_vcc) {
- PDEBUG(DEBUG_EXTRA, " Vcc (default) mismatch "
- "- skipping this entry\n");
- goto next_entry;
- }
- }
-
- if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp =
- cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
- else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp =
- dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
-
- /* Do we need to allocate an interrupt? */
- if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
- link->conf.Attributes |= CONF_ENABLE_IRQ;
- else if (!(link->conf.Attributes & CONF_ENABLE_IRQ)) {
- /* At least Compaq WL200 does not have IRQInfo1 set,
- * but it does not work without interrupts.. */
- printk("Config has no IRQ info, but trying to enable "
- "IRQ anyway..\n");
- link->conf.Attributes |= CONF_ENABLE_IRQ;
- }
-
- /* IO window settings */
- PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d "
- "dflt.io.nwin=%d\n",
- cfg->io.nwin, dflt.io.nwin);
- link->io.NumPorts1 = link->io.NumPorts2 = 0;
- if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
- cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- PDEBUG(DEBUG_EXTRA, "io->flags = 0x%04X, "
- "io.base=0x%04x, len=%d\n", io->flags,
- io->win[0].base, io->win[0].len);
- if (!(io->flags & CISTPL_IO_8BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.IOAddrLines = io->flags &
- CISTPL_IO_LINES_MASK;
- link->io.BasePort1 = io->win[0].base;
- link->io.NumPorts1 = io->win[0].len;
- if (io->nwin > 1) {
- link->io.Attributes2 = link->io.Attributes1;
- link->io.BasePort2 = io->win[1].base;
- link->io.NumPorts2 = io->win[1].len;
- }
- }
-
- /* This reserves IO space but doesn't actually enable it */
- CFG_CHECK2(RequestIO,
- pcmcia_request_io(link, &link->io));
-
- /* This configuration table entry is OK */
- break;
-
- next_entry:
- CS_CHECK(GetNextTuple,
- pcmcia_get_next_tuple(link, &tuple));
+ ret = pcmcia_loop_config(link, prism2_config_check, NULL);
+ if (ret) {
+ if (!ignore_cis_vcc)
+ printk(KERN_ERR "GetNextTuple(): No matching "
+ "CIS configuration. Maybe you need the "
+ "ignore_cis_vcc=1 parameter.\n");
+ goto failed;
}
/* Need to allocate net_device before requesting IRQ handler */
dev = prism2_init_local_data(&prism2_pccard_funcs, 0,
- &handle_to_dev(link));
+ &link->dev);
if (dev == NULL)
goto failed;
link->priv = dev;
* irq structure is initialized.
*/
if (link->conf.Attributes & CONF_ENABLE_IRQ) {
- link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
- link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+ link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->irq.Handler = prism2_interrupt;
- link->irq.Instance = dev;
- CS_CHECK(RequestIRQ,
- pcmcia_request_irq(link, &link->irq));
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
}
/*
* the I/O windows and the interrupt mapping, and putting the
* card and host interface into "Memory and IO" mode.
*/
- CS_CHECK(RequestConfiguration,
- pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
dev->irq = link->irq.AssignedIRQ;
dev->base_addr = link->io.BasePort1;
if (ret == 0 && local->ddev)
strcpy(hw_priv->node.dev_name, local->ddev->name);
}
- kfree(parse);
return ret;
- cs_failed:
- cs_error(link, last_fn, last_ret);
-
failed:
- kfree(parse);
kfree(hw_priv);
prism2_release((u_long)link);
return ret;
int dev_open = 0;
struct hostap_interface *iface = NULL;
- if (dev)
- iface = netdev_priv(dev);
+ if (!dev)
+ return -ENODEV;
+
+ iface = netdev_priv(dev);
PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_PM_SUSPEND\n", dev_info);
if (iface && iface->local)
int dev_open = 0;
struct hostap_interface *iface = NULL;
- if (dev)
- iface = netdev_priv(dev);
+ if (!dev)
+ return -ENODEV;
+
+ iface = netdev_priv(dev);
PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_PM_RESUME\n", dev_info);
PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x0001),
PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300),
/* PCMCIA_DEVICE_MANF_CARD(0xc00f, 0x0000), conflict with pcnet_cs */
+ PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002),
PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002),
PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005),
PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0010),
PCMCIA_MFC_DEVICE_PROD_ID12(0, "SanDisk", "ConnectPlus",
0x7a954bd9, 0x74be00c6),
PCMCIA_DEVICE_PROD_ID123(
- "Intersil", "PRISM 2_5 PCMCIA ADAPTER", "ISL37300P",
- 0x4b801a17, 0x6345a0bf, 0xc9049a39),
- /* D-Link DWL-650 Rev. P1; manfid 0x000b, 0x7110 */
- PCMCIA_DEVICE_PROD_ID123(
- "D-Link", "DWL-650 Wireless PC Card RevP", "ISL37101P-10",
- 0x1a424a1c, 0x6ea57632, 0xdd97a26b),
- PCMCIA_DEVICE_PROD_ID123(
"Addtron", "AWP-100 Wireless PCMCIA", "Version 01.02",
0xe6ec52ce, 0x08649af2, 0x4b74baa0),
PCMCIA_DEVICE_PROD_ID123(
"Ver. 1.00",
0x5cd01705, 0x4271660f, 0x9d08ee12),
PCMCIA_DEVICE_PROD_ID123(
- "corega", "WL PCCL-11", "ISL37300P",
- 0xa21501a, 0x59868926, 0xc9049a39),
- PCMCIA_DEVICE_PROD_ID123(
- "The Linksys Group, Inc.", "Wireless Network CF Card", "ISL37300P",
- 0xa5f472c2, 0x9c05598d, 0xc9049a39),
+ "Wireless LAN" , "11Mbps PC Card", "Version 01.02",
+ 0x4b8870ff, 0x70e946d1, 0x4b74baa0),
+ PCMCIA_DEVICE_PROD_ID3("HFA3863", 0x355cb092),
+ PCMCIA_DEVICE_PROD_ID3("ISL37100P", 0x630d52b2),
+ PCMCIA_DEVICE_PROD_ID3("ISL37101P-10", 0xdd97a26b),
+ PCMCIA_DEVICE_PROD_ID3("ISL37300P", 0xc9049a39),
PCMCIA_DEVICE_NULL
};
MODULE_DEVICE_TABLE(pcmcia, hostap_cs_ids);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff