#include <linux/moduleparam.h>
#include <linux/if_arp.h>
#include <linux/etherdevice.h>
-#include <linux/version.h>
#include <linux/firmware.h>
#include <linux/wireless.h>
#include <linux/workqueue.h>
#include "b43.h"
#include "main.h"
#include "debugfs.h"
-#include "phy.h"
-#include "nphy.h"
+#include "phy_common.h"
+#include "phy_g.h"
+#include "phy_n.h"
#include "dma.h"
#include "pio.h"
#include "sysfs.h"
b43_write32(dev, B43_MMIO_SHM_CONTROL, control);
}
-u32 b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset)
+u32 __b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset)
{
- struct b43_wl *wl = dev->wl;
- unsigned long flags;
u32 ret;
- spin_lock_irqsave(&wl->shm_lock, flags);
if (routing == B43_SHM_SHARED) {
B43_WARN_ON(offset & 0x0001);
if (offset & 0x0003) {
b43_shm_control_word(dev, routing, offset);
ret = b43_read32(dev, B43_MMIO_SHM_DATA);
out:
- spin_unlock_irqrestore(&wl->shm_lock, flags);
-
return ret;
}
-u16 b43_shm_read16(struct b43_wldev * dev, u16 routing, u16 offset)
+u32 b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset)
{
struct b43_wl *wl = dev->wl;
unsigned long flags;
- u16 ret;
+ u32 ret;
spin_lock_irqsave(&wl->shm_lock, flags);
+ ret = __b43_shm_read32(dev, routing, offset);
+ spin_unlock_irqrestore(&wl->shm_lock, flags);
+
+ return ret;
+}
+
+u16 __b43_shm_read16(struct b43_wldev *dev, u16 routing, u16 offset)
+{
+ u16 ret;
+
if (routing == B43_SHM_SHARED) {
B43_WARN_ON(offset & 0x0001);
if (offset & 0x0003) {
b43_shm_control_word(dev, routing, offset);
ret = b43_read16(dev, B43_MMIO_SHM_DATA);
out:
- spin_unlock_irqrestore(&wl->shm_lock, flags);
-
return ret;
}
-void b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value)
+u16 b43_shm_read16(struct b43_wldev *dev, u16 routing, u16 offset)
{
struct b43_wl *wl = dev->wl;
unsigned long flags;
+ u16 ret;
spin_lock_irqsave(&wl->shm_lock, flags);
+ ret = __b43_shm_read16(dev, routing, offset);
+ spin_unlock_irqrestore(&wl->shm_lock, flags);
+
+ return ret;
+}
+
+void __b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value)
+{
if (routing == B43_SHM_SHARED) {
B43_WARN_ON(offset & 0x0001);
if (offset & 0x0003) {
(value >> 16) & 0xffff);
b43_shm_control_word(dev, routing, (offset >> 2) + 1);
b43_write16(dev, B43_MMIO_SHM_DATA, value & 0xffff);
- goto out;
+ return;
}
offset >>= 2;
}
b43_shm_control_word(dev, routing, offset);
b43_write32(dev, B43_MMIO_SHM_DATA, value);
-out:
- spin_unlock_irqrestore(&wl->shm_lock, flags);
}
-void b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value)
+void b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value)
{
struct b43_wl *wl = dev->wl;
unsigned long flags;
spin_lock_irqsave(&wl->shm_lock, flags);
+ __b43_shm_write32(dev, routing, offset, value);
+ spin_unlock_irqrestore(&wl->shm_lock, flags);
+}
+
+void __b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value)
+{
if (routing == B43_SHM_SHARED) {
B43_WARN_ON(offset & 0x0001);
if (offset & 0x0003) {
/* Unaligned access */
b43_shm_control_word(dev, routing, offset >> 2);
b43_write16(dev, B43_MMIO_SHM_DATA_UNALIGNED, value);
- goto out;
+ return;
}
offset >>= 2;
}
b43_shm_control_word(dev, routing, offset);
b43_write16(dev, B43_MMIO_SHM_DATA, value);
-out:
+}
+
+void b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value)
+{
+ struct b43_wl *wl = dev->wl;
+ unsigned long flags;
+
+ spin_lock_irqsave(&wl->shm_lock, flags);
+ __b43_shm_write16(dev, routing, offset, value);
spin_unlock_irqrestore(&wl->shm_lock, flags);
}
break;
udelay(10);
}
- for (i = 0x00; i < 0x0A; i++) {
+ for (i = 0x00; i < 0x19; i++) {
value = b43_read16(dev, 0x0690);
if (!(value & 0x0100))
break;
}
}
-/* Turn the Analog ON/OFF */
-static void b43_switch_analog(struct b43_wldev *dev, int on)
-{
- switch (dev->phy.type) {
- case B43_PHYTYPE_A:
- case B43_PHYTYPE_G:
- b43_write16(dev, B43_MMIO_PHY0, on ? 0 : 0xF4);
- break;
- case B43_PHYTYPE_N:
- b43_phy_write(dev, B43_NPHY_AFECTL_OVER,
- on ? 0 : 0x7FFF);
- break;
- default:
- B43_WARN_ON(1);
- }
-}
-
void b43_wireless_core_reset(struct b43_wldev *dev, u32 flags)
{
u32 tmslow;
ssb_read32(dev->dev, SSB_TMSLOW); /* flush */
msleep(1);
- /* Turn Analog ON */
- b43_switch_analog(dev, 1);
+ /* Turn Analog ON, but only if we already know the PHY-type.
+ * This protects against very early setup where we don't know the
+ * PHY-type, yet. wireless_core_reset will be called once again later,
+ * when we know the PHY-type. */
+ if (dev->phy.ops)
+ dev->phy.ops->switch_analog(dev, 1);
macctl = b43_read32(dev, B43_MMIO_MACCTL);
macctl &= ~B43_MACCTL_GMODE;
b43_jssi_write(dev, 0x7F7F7F7F);
b43_write32(dev, B43_MMIO_MACCMD,
b43_read32(dev, B43_MMIO_MACCMD) | B43_MACCMD_BGNOISE);
- B43_WARN_ON(dev->noisecalc.channel_at_start != dev->phy.channel);
}
static void b43_calculate_link_quality(struct b43_wldev *dev)
{
/* Top half of Link Quality calculation. */
+ if (dev->phy.type != B43_PHYTYPE_G)
+ return;
if (dev->noisecalc.calculation_running)
return;
- dev->noisecalc.channel_at_start = dev->phy.channel;
dev->noisecalc.calculation_running = 1;
dev->noisecalc.nr_samples = 0;
static void handle_irq_noise(struct b43_wldev *dev)
{
- struct b43_phy *phy = &dev->phy;
+ struct b43_phy_g *phy = dev->phy.g;
u16 tmp;
u8 noise[4];
u8 i, j;
/* Bottom half of Link Quality calculation. */
+ if (dev->phy.type != B43_PHYTYPE_G)
+ return;
+
+ /* Possible race condition: It might be possible that the user
+ * changed to a different channel in the meantime since we
+ * started the calculation. We ignore that fact, since it's
+ * not really that much of a problem. The background noise is
+ * an estimation only anyway. Slightly wrong results will get damped
+ * by the averaging of the 8 sample rounds. Additionally the
+ * value is shortlived. So it will be replaced by the next noise
+ * calculation round soon. */
+
B43_WARN_ON(!dev->noisecalc.calculation_running);
- if (dev->noisecalc.channel_at_start != phy->channel)
- goto drop_calculation;
*((__le32 *)noise) = cpu_to_le32(b43_jssi_read(dev));
if (noise[0] == 0x7F || noise[1] == 0x7F ||
noise[2] == 0x7F || noise[3] == 0x7F)
/* Get the noise samples. */
B43_WARN_ON(dev->noisecalc.nr_samples >= 8);
i = dev->noisecalc.nr_samples;
- noise[0] = limit_value(noise[0], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
- noise[1] = limit_value(noise[1], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
- noise[2] = limit_value(noise[2], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
- noise[3] = limit_value(noise[3], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
+ noise[0] = clamp_val(noise[0], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
+ noise[1] = clamp_val(noise[1], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
+ noise[2] = clamp_val(noise[2], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
+ noise[3] = clamp_val(noise[3], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
dev->noisecalc.samples[i][0] = phy->nrssi_lt[noise[0]];
dev->noisecalc.samples[i][1] = phy->nrssi_lt[noise[1]];
dev->noisecalc.samples[i][2] = phy->nrssi_lt[noise[2]];
average -= 48;
dev->stats.link_noise = average;
- drop_calculation:
dev->noisecalc.calculation_running = 0;
return;
}
- generate_new:
+generate_new:
b43_generate_noise_sample(dev);
}
static void handle_irq_tbtt_indication(struct b43_wldev *dev)
{
- if (b43_is_mode(dev->wl, IEEE80211_IF_TYPE_AP)) {
+ if (b43_is_mode(dev->wl, NL80211_IFTYPE_AP)) {
///TODO: PS TBTT
} else {
if (1 /*FIXME: the last PSpoll frame was sent successfully */ )
b43_power_saving_ctl_bits(dev, 0);
}
- if (b43_is_mode(dev->wl, IEEE80211_IF_TYPE_IBSS))
+ if (b43_is_mode(dev->wl, NL80211_IFTYPE_ADHOC))
dev->dfq_valid = 1;
}
unsigned int rate;
u16 ctl;
int antenna;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(dev->wl->current_beacon);
bcn = (const struct ieee80211_mgmt *)(dev->wl->current_beacon->data);
len = min((size_t) dev->wl->current_beacon->len,
0x200 - sizeof(struct b43_plcp_hdr6));
- rate = dev->wl->beacon_txctl.tx_rate->hw_value;
+ rate = ieee80211_get_tx_rate(dev->wl->hw, info)->hw_value;
b43_write_template_common(dev, (const u8 *)bcn,
len, ram_offset, shm_size_offset, rate);
/* Write the PHY TX control parameters. */
- antenna = b43_antenna_from_ieee80211(dev,
- dev->wl->beacon_txctl.antenna_sel_tx);
+ antenna = b43_antenna_from_ieee80211(dev, info->antenna_sel_tx);
antenna = b43_antenna_to_phyctl(antenna);
ctl = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL);
/* We can't send beacons with short preamble. Would get PHY errors. */
i += ie_len + 2;
}
if (!tim_found) {
- b43warn(dev->wl, "Did not find a valid TIM IE in "
- "the beacon template packet. AP or IBSS operation "
- "may be broken.\n");
- } else
- b43dbg(dev->wl, "Updated beacon template\n");
+ /*
+ * If ucode wants to modify TIM do it behind the beacon, this
+ * will happen, for example, when doing mesh networking.
+ */
+ b43_shm_write16(dev, B43_SHM_SHARED,
+ B43_SHM_SH_TIMBPOS,
+ len + sizeof(struct b43_plcp_hdr6));
+ b43_shm_write16(dev, B43_SHM_SHARED,
+ B43_SHM_SH_DTIMPER, 0);
+ }
+ b43dbg(dev->wl, "Updated beacon template at 0x%x\n", ram_offset);
}
static void b43_write_probe_resp_plcp(struct b43_wldev *dev,
kfree(probe_resp_data);
}
+static void b43_upload_beacon0(struct b43_wldev *dev)
+{
+ struct b43_wl *wl = dev->wl;
+
+ if (wl->beacon0_uploaded)
+ return;
+ b43_write_beacon_template(dev, 0x68, 0x18);
+ /* FIXME: Probe resp upload doesn't really belong here,
+ * but we don't use that feature anyway. */
+ b43_write_probe_resp_template(dev, 0x268, 0x4A,
+ &__b43_ratetable[3]);
+ wl->beacon0_uploaded = 1;
+}
+
+static void b43_upload_beacon1(struct b43_wldev *dev)
+{
+ struct b43_wl *wl = dev->wl;
+
+ if (wl->beacon1_uploaded)
+ return;
+ b43_write_beacon_template(dev, 0x468, 0x1A);
+ wl->beacon1_uploaded = 1;
+}
+
static void handle_irq_beacon(struct b43_wldev *dev)
{
struct b43_wl *wl = dev->wl;
u32 cmd, beacon0_valid, beacon1_valid;
- if (!b43_is_mode(wl, IEEE80211_IF_TYPE_AP))
+ if (!b43_is_mode(wl, NL80211_IFTYPE_AP) &&
+ !b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT))
return;
/* This is the bottom half of the asynchronous beacon update. */
return;
}
- if (!beacon0_valid) {
- if (!wl->beacon0_uploaded) {
- b43_write_beacon_template(dev, 0x68, 0x18);
- b43_write_probe_resp_template(dev, 0x268, 0x4A,
- &__b43_ratetable[3]);
- wl->beacon0_uploaded = 1;
- }
+ if (unlikely(wl->beacon_templates_virgin)) {
+ /* We never uploaded a beacon before.
+ * Upload both templates now, but only mark one valid. */
+ wl->beacon_templates_virgin = 0;
+ b43_upload_beacon0(dev);
+ b43_upload_beacon1(dev);
cmd = b43_read32(dev, B43_MMIO_MACCMD);
cmd |= B43_MACCMD_BEACON0_VALID;
b43_write32(dev, B43_MMIO_MACCMD, cmd);
- } else if (!beacon1_valid) {
- if (!wl->beacon1_uploaded) {
- b43_write_beacon_template(dev, 0x468, 0x1A);
- wl->beacon1_uploaded = 1;
+ } else {
+ if (!beacon0_valid) {
+ b43_upload_beacon0(dev);
+ cmd = b43_read32(dev, B43_MMIO_MACCMD);
+ cmd |= B43_MACCMD_BEACON0_VALID;
+ b43_write32(dev, B43_MMIO_MACCMD, cmd);
+ } else if (!beacon1_valid) {
+ b43_upload_beacon1(dev);
+ cmd = b43_read32(dev, B43_MMIO_MACCMD);
+ cmd |= B43_MACCMD_BEACON1_VALID;
+ b43_write32(dev, B43_MMIO_MACCMD, cmd);
}
- cmd = b43_read32(dev, B43_MMIO_MACCMD);
- cmd |= B43_MACCMD_BEACON1_VALID;
- b43_write32(dev, B43_MMIO_MACCMD, cmd);
}
}
/* Asynchronously update the packet templates in template RAM.
* Locking: Requires wl->irq_lock to be locked. */
-static void b43_update_templates(struct b43_wl *wl, struct sk_buff *beacon,
- const struct ieee80211_tx_control *txctl)
+static void b43_update_templates(struct b43_wl *wl)
{
+ struct sk_buff *beacon;
+
/* This is the top half of the ansynchronous beacon update.
* The bottom half is the beacon IRQ.
* Beacon update must be asynchronous to avoid sending an
* invalid beacon. This can happen for example, if the firmware
* transmits a beacon while we are updating it. */
+ /* We could modify the existing beacon and set the aid bit in
+ * the TIM field, but that would probably require resizing and
+ * moving of data within the beacon template.
+ * Simply request a new beacon and let mac80211 do the hard work. */
+ beacon = ieee80211_beacon_get(wl->hw, wl->vif);
+ if (unlikely(!beacon))
+ return;
+
if (wl->current_beacon)
dev_kfree_skb_any(wl->current_beacon);
wl->current_beacon = beacon;
- memcpy(&wl->beacon_txctl, txctl, sizeof(wl->beacon_txctl));
wl->beacon0_uploaded = 0;
wl->beacon1_uploaded = 0;
queue_work(wl->hw->workqueue, &wl->beacon_update_trigger);
b43dbg(dev->wl, "Set beacon interval to %u\n", beacon_int);
}
+static void b43_handle_firmware_panic(struct b43_wldev *dev)
+{
+ u16 reason;
+
+ /* Read the register that contains the reason code for the panic. */
+ reason = b43_shm_read16(dev, B43_SHM_SCRATCH, B43_FWPANIC_REASON_REG);
+ b43err(dev->wl, "Whoopsy, firmware panic! Reason: %u\n", reason);
+
+ switch (reason) {
+ default:
+ b43dbg(dev->wl, "The panic reason is unknown.\n");
+ /* fallthrough */
+ case B43_FWPANIC_DIE:
+ /* Do not restart the controller or firmware.
+ * The device is nonfunctional from now on.
+ * Restarting would result in this panic to trigger again,
+ * so we avoid that recursion. */
+ break;
+ case B43_FWPANIC_RESTART:
+ b43_controller_restart(dev, "Microcode panic");
+ break;
+ }
+}
+
static void handle_irq_ucode_debug(struct b43_wldev *dev)
{
- //TODO
+ unsigned int i, cnt;
+ u16 reason, marker_id, marker_line;
+ __le16 *buf;
+
+ /* The proprietary firmware doesn't have this IRQ. */
+ if (!dev->fw.opensource)
+ return;
+
+ /* Read the register that contains the reason code for this IRQ. */
+ reason = b43_shm_read16(dev, B43_SHM_SCRATCH, B43_DEBUGIRQ_REASON_REG);
+
+ switch (reason) {
+ case B43_DEBUGIRQ_PANIC:
+ b43_handle_firmware_panic(dev);
+ break;
+ case B43_DEBUGIRQ_DUMP_SHM:
+ if (!B43_DEBUG)
+ break; /* Only with driver debugging enabled. */
+ buf = kmalloc(4096, GFP_ATOMIC);
+ if (!buf) {
+ b43dbg(dev->wl, "SHM-dump: Failed to allocate memory\n");
+ goto out;
+ }
+ for (i = 0; i < 4096; i += 2) {
+ u16 tmp = b43_shm_read16(dev, B43_SHM_SHARED, i);
+ buf[i / 2] = cpu_to_le16(tmp);
+ }
+ b43info(dev->wl, "Shared memory dump:\n");
+ print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET,
+ 16, 2, buf, 4096, 1);
+ kfree(buf);
+ break;
+ case B43_DEBUGIRQ_DUMP_REGS:
+ if (!B43_DEBUG)
+ break; /* Only with driver debugging enabled. */
+ b43info(dev->wl, "Microcode register dump:\n");
+ for (i = 0, cnt = 0; i < 64; i++) {
+ u16 tmp = b43_shm_read16(dev, B43_SHM_SCRATCH, i);
+ if (cnt == 0)
+ printk(KERN_INFO);
+ printk("r%02u: 0x%04X ", i, tmp);
+ cnt++;
+ if (cnt == 6) {
+ printk("\n");
+ cnt = 0;
+ }
+ }
+ printk("\n");
+ break;
+ case B43_DEBUGIRQ_MARKER:
+ if (!B43_DEBUG)
+ break; /* Only with driver debugging enabled. */
+ marker_id = b43_shm_read16(dev, B43_SHM_SCRATCH,
+ B43_MARKER_ID_REG);
+ marker_line = b43_shm_read16(dev, B43_SHM_SCRATCH,
+ B43_MARKER_LINE_REG);
+ b43info(dev->wl, "The firmware just executed the MARKER(%u) "
+ "at line number %u\n",
+ marker_id, marker_line);
+ break;
+ default:
+ b43dbg(dev->wl, "Debug-IRQ triggered for unknown reason: %u\n",
+ reason);
+ }
+out:
+ /* Acknowledge the debug-IRQ, so the firmware can continue. */
+ b43_shm_write16(dev, B43_SHM_SCRATCH,
+ B43_DEBUGIRQ_REASON_REG, B43_DEBUGIRQ_ACK);
}
/* Interrupt handler bottom-half */
static int do_request_fw(struct b43_wldev *dev,
const char *name,
- struct b43_firmware_file *fw)
+ struct b43_firmware_file *fw,
+ bool silent)
{
char path[sizeof(modparam_fwpostfix) + 32];
const struct firmware *blob;
"b43%s/%s.fw",
modparam_fwpostfix, name);
err = request_firmware(&blob, path, dev->dev->dev);
- if (err) {
- b43err(dev->wl, "Firmware file \"%s\" not found "
- "or load failed.\n", path);
+ if (err == -ENOENT) {
+ if (!silent) {
+ b43err(dev->wl, "Firmware file \"%s\" not found\n",
+ path);
+ }
+ return err;
+ } else if (err) {
+ b43err(dev->wl, "Firmware file \"%s\" request failed (err=%d)\n",
+ path, err);
return err;
}
if (blob->size < sizeof(struct b43_fw_header))
filename = "ucode13";
else
goto err_no_ucode;
- err = do_request_fw(dev, filename, &fw->ucode);
+ err = do_request_fw(dev, filename, &fw->ucode, 0);
if (err)
goto err_load;
filename = NULL;
else
goto err_no_pcm;
- err = do_request_fw(dev, filename, &fw->pcm);
- if (err)
+ fw->pcm_request_failed = 0;
+ err = do_request_fw(dev, filename, &fw->pcm, 1);
+ if (err == -ENOENT) {
+ /* We did not find a PCM file? Not fatal, but
+ * core rev <= 10 must do without hwcrypto then. */
+ fw->pcm_request_failed = 1;
+ } else if (err)
goto err_load;
/* Get initvals */
if ((rev >= 5) && (rev <= 10))
filename = "b0g0initvals5";
else if (rev >= 13)
- filename = "lp0initvals13";
+ filename = "b0g0initvals13";
else
goto err_no_initvals;
break;
default:
goto err_no_initvals;
}
- err = do_request_fw(dev, filename, &fw->initvals);
+ err = do_request_fw(dev, filename, &fw->initvals, 0);
if (err)
goto err_load;
default:
goto err_no_initvals;
}
- err = do_request_fw(dev, filename, &fw->initvals_band);
+ err = do_request_fw(dev, filename, &fw->initvals_band, 0);
if (err)
goto err_load;
err = -EOPNOTSUPP;
goto error;
}
- b43info(dev->wl, "Loading firmware version %u.%u "
- "(20%.2i-%.2i-%.2i %.2i:%.2i:%.2i)\n",
- fwrev, fwpatch,
- (fwdate >> 12) & 0xF, (fwdate >> 8) & 0xF, fwdate & 0xFF,
- (fwtime >> 11) & 0x1F, (fwtime >> 5) & 0x3F, fwtime & 0x1F);
-
dev->fw.rev = fwrev;
dev->fw.patch = fwpatch;
+ dev->fw.opensource = (fwdate == 0xFFFF);
+
+ if (dev->fw.opensource) {
+ /* Patchlevel info is encoded in the "time" field. */
+ dev->fw.patch = fwtime;
+ b43info(dev->wl, "Loading OpenSource firmware version %u.%u%s\n",
+ dev->fw.rev, dev->fw.patch,
+ dev->fw.pcm_request_failed ? " (Hardware crypto not supported)" : "");
+ } else {
+ b43info(dev->wl, "Loading firmware version %u.%u "
+ "(20%.2i-%.2i-%.2i %.2i:%.2i:%.2i)\n",
+ fwrev, fwpatch,
+ (fwdate >> 12) & 0xF, (fwdate >> 8) & 0xF, fwdate & 0xFF,
+ (fwtime >> 11) & 0x1F, (fwtime >> 5) & 0x3F, fwtime & 0x1F);
+ if (dev->fw.pcm_request_failed) {
+ b43warn(dev->wl, "No \"pcm5.fw\" firmware file found. "
+ "Hardware accelerated cryptography is disabled.\n");
+ b43_print_fw_helptext(dev->wl, 0);
+ }
+ }
if (b43_is_old_txhdr_format(dev)) {
b43warn(dev->wl, "You are using an old firmware image. "
/* http://bcm-specs.sipsolutions.net/EnableMac */
void b43_mac_enable(struct b43_wldev *dev)
{
+ if (b43_debug(dev, B43_DBG_FIRMWARE)) {
+ u16 fwstate;
+
+ fwstate = b43_shm_read16(dev, B43_SHM_SHARED,
+ B43_SHM_SH_UCODESTAT);
+ if ((fwstate != B43_SHM_SH_UCODESTAT_SUSP) &&
+ (fwstate != B43_SHM_SH_UCODESTAT_SLEEP)) {
+ b43err(dev->wl, "b43_mac_enable(): The firmware "
+ "should be suspended, but current state is %u\n",
+ fwstate);
+ }
+ }
+
dev->mac_suspended--;
B43_WARN_ON(dev->mac_suspended < 0);
if (dev->mac_suspended == 0) {
b43_read32(dev, B43_MMIO_MACCTL);
b43_read32(dev, B43_MMIO_GEN_IRQ_REASON);
b43_power_saving_ctl_bits(dev, 0);
-
- /* Re-enable IRQs. */
- spin_lock_irq(&dev->wl->irq_lock);
- b43_interrupt_enable(dev, dev->irq_savedstate);
- spin_unlock_irq(&dev->wl->irq_lock);
}
}
B43_WARN_ON(dev->mac_suspended < 0);
if (dev->mac_suspended == 0) {
- /* Mask IRQs before suspending MAC. Otherwise
- * the MAC stays busy and won't suspend. */
- spin_lock_irq(&dev->wl->irq_lock);
- tmp = b43_interrupt_disable(dev, B43_IRQ_ALL);
- spin_unlock_irq(&dev->wl->irq_lock);
- b43_synchronize_irq(dev);
- dev->irq_savedstate = tmp;
-
b43_power_saving_ctl_bits(dev, B43_PS_AWAKE);
b43_write32(dev, B43_MMIO_MACCTL,
b43_read32(dev, B43_MMIO_MACCTL)
ctl &= ~B43_MACCTL_BEACPROMISC;
ctl |= B43_MACCTL_INFRA;
- if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP))
+ if (b43_is_mode(wl, NL80211_IFTYPE_AP) ||
+ b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT))
ctl |= B43_MACCTL_AP;
- else if (b43_is_mode(wl, IEEE80211_IF_TYPE_IBSS))
+ else if (b43_is_mode(wl, NL80211_IFTYPE_ADHOC))
ctl &= ~B43_MACCTL_INFRA;
if (wl->filter_flags & FIF_CONTROL)
/* This is the opposite of b43_chip_init() */
static void b43_chip_exit(struct b43_wldev *dev)
{
- b43_radio_turn_off(dev, 1);
+ b43_phy_exit(dev);
b43_gpio_cleanup(dev);
- b43_lo_g_cleanup(dev);
/* firmware is released later */
}
static int b43_chip_init(struct b43_wldev *dev)
{
struct b43_phy *phy = &dev->phy;
- int err, tmp;
+ int err;
u32 value32, macctl;
u16 value16;
err = b43_upload_initvals(dev);
if (err)
goto err_gpio_clean;
- b43_radio_turn_on(dev);
- b43_write16(dev, 0x03E6, 0x0000);
+ /* Turn the Analog on and initialize the PHY. */
+ phy->ops->switch_analog(dev, 1);
err = b43_phy_init(dev);
if (err)
- goto err_radio_off;
+ goto err_gpio_clean;
- /* Select initial Interference Mitigation. */
- tmp = phy->interfmode;
- phy->interfmode = B43_INTERFMODE_NONE;
- b43_radio_set_interference_mitigation(dev, tmp);
+ /* Disable Interference Mitigation. */
+ if (phy->ops->interf_mitigation)
+ phy->ops->interf_mitigation(dev, B43_INTERFMODE_NONE);
- b43_set_rx_antenna(dev, B43_ANTENNA_DEFAULT);
+ /* Select the antennae */
+ if (phy->ops->set_rx_antenna)
+ phy->ops->set_rx_antenna(dev, B43_ANTENNA_DEFAULT);
b43_mgmtframe_txantenna(dev, B43_ANTENNA_DEFAULT);
if (phy->type == B43_PHYTYPE_B) {
out:
return err;
-err_radio_off:
- b43_radio_turn_off(dev, 1);
err_gpio_clean:
b43_gpio_cleanup(dev);
return err;
static void b43_periodic_every60sec(struct b43_wldev *dev)
{
- struct b43_phy *phy = &dev->phy;
+ const struct b43_phy_operations *ops = dev->phy.ops;
- if (phy->type != B43_PHYTYPE_G)
- return;
- if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI) {
- b43_mac_suspend(dev);
- b43_calc_nrssi_slope(dev);
- if ((phy->radio_ver == 0x2050) && (phy->radio_rev == 8)) {
- u8 old_chan = phy->channel;
-
- /* VCO Calibration */
- if (old_chan >= 8)
- b43_radio_selectchannel(dev, 1, 0);
- else
- b43_radio_selectchannel(dev, 13, 0);
- b43_radio_selectchannel(dev, old_chan, 0);
- }
- b43_mac_enable(dev);
- }
+ if (ops->pwork_60sec)
+ ops->pwork_60sec(dev);
+
+ /* Force check the TX power emission now. */
+ b43_phy_txpower_check(dev, B43_TXPWR_IGNORE_TIME);
}
static void b43_periodic_every30sec(struct b43_wldev *dev)
static void b43_periodic_every15sec(struct b43_wldev *dev)
{
struct b43_phy *phy = &dev->phy;
-
- if (phy->type == B43_PHYTYPE_G) {
- //TODO: update_aci_moving_average
- if (phy->aci_enable && phy->aci_wlan_automatic) {
- b43_mac_suspend(dev);
- if (!phy->aci_enable && 1 /*TODO: not scanning? */ ) {
- if (0 /*TODO: bunch of conditions */ ) {
- b43_radio_set_interference_mitigation
- (dev, B43_INTERFMODE_MANUALWLAN);
- }
- } else if (1 /*TODO*/) {
- /*
- if ((aci_average > 1000) && !(b43_radio_aci_scan(dev))) {
- b43_radio_set_interference_mitigation(dev,
- B43_INTERFMODE_NONE);
- }
- */
- }
- b43_mac_enable(dev);
- } else if (phy->interfmode == B43_INTERFMODE_NONWLAN &&
- phy->rev == 1) {
- //TODO: implement rev1 workaround
+ u16 wdr;
+
+ if (dev->fw.opensource) {
+ /* Check if the firmware is still alive.
+ * It will reset the watchdog counter to 0 in its idle loop. */
+ wdr = b43_shm_read16(dev, B43_SHM_SCRATCH, B43_WATCHDOG_REG);
+ if (unlikely(wdr)) {
+ b43err(dev->wl, "Firmware watchdog: The firmware died!\n");
+ b43_controller_restart(dev, "Firmware watchdog");
+ return;
+ } else {
+ b43_shm_write16(dev, B43_SHM_SCRATCH,
+ B43_WATCHDOG_REG, 1);
}
}
- b43_phy_xmitpower(dev); //FIXME: unless scanning?
- b43_lo_g_maintanance_work(dev);
- //TODO for APHY (temperature?)
+
+ if (phy->ops->pwork_15sec)
+ phy->ops->pwork_15sec(dev);
atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT);
wmb();
}
static int b43_op_tx(struct ieee80211_hw *hw,
- struct sk_buff *skb,
- struct ieee80211_tx_control *ctl)
+ struct sk_buff *skb)
{
struct b43_wl *wl = hw_to_b43_wl(hw);
struct b43_wldev *dev = wl->current_dev;
if (unlikely(skb->len < 2 + 2 + 6)) {
/* Too short, this can't be a valid frame. */
- dev_kfree_skb_any(skb);
- return NETDEV_TX_OK;
+ goto drop_packet;
}
B43_WARN_ON(skb_shinfo(skb)->nr_frags);
if (unlikely(!dev))
- return NETDEV_TX_BUSY;
+ goto drop_packet;
/* Transmissions on seperate queues can run concurrently. */
read_lock_irqsave(&wl->tx_lock, flags);
err = -ENODEV;
if (likely(b43_status(dev) >= B43_STAT_STARTED)) {
if (b43_using_pio_transfers(dev))
- err = b43_pio_tx(dev, skb, ctl);
+ err = b43_pio_tx(dev, skb);
else
- err = b43_dma_tx(dev, skb, ctl);
+ err = b43_dma_tx(dev, skb);
}
read_unlock_irqrestore(&wl->tx_lock, flags);
if (unlikely(err))
- return NETDEV_TX_BUSY;
+ goto drop_packet;
+ return NETDEV_TX_OK;
+
+drop_packet:
+ /* We can not transmit this packet. Drop it. */
+ dev_kfree_skb_any(skb);
return NETDEV_TX_OK;
}
u16 shm_offset)
{
u16 params[B43_NR_QOSPARAMS];
- int cw_min, cw_max, aifs, bslots, tmp;
+ int bslots, tmp;
unsigned int i;
- const u16 aCWmin = 0x0001;
- const u16 aCWmax = 0x03FF;
-
- /* Calculate the default values for the parameters, if needed. */
- switch (shm_offset) {
- case B43_QOS_VOICE:
- aifs = (p->aifs == -1) ? 2 : p->aifs;
- cw_min = (p->cw_min == 0) ? ((aCWmin + 1) / 4 - 1) : p->cw_min;
- cw_max = (p->cw_max == 0) ? ((aCWmin + 1) / 2 - 1) : p->cw_max;
- break;
- case B43_QOS_VIDEO:
- aifs = (p->aifs == -1) ? 2 : p->aifs;
- cw_min = (p->cw_min == 0) ? ((aCWmin + 1) / 2 - 1) : p->cw_min;
- cw_max = (p->cw_max == 0) ? aCWmin : p->cw_max;
- break;
- case B43_QOS_BESTEFFORT:
- aifs = (p->aifs == -1) ? 3 : p->aifs;
- cw_min = (p->cw_min == 0) ? aCWmin : p->cw_min;
- cw_max = (p->cw_max == 0) ? aCWmax : p->cw_max;
- break;
- case B43_QOS_BACKGROUND:
- aifs = (p->aifs == -1) ? 7 : p->aifs;
- cw_min = (p->cw_min == 0) ? aCWmin : p->cw_min;
- cw_max = (p->cw_max == 0) ? aCWmax : p->cw_max;
- break;
- default:
- B43_WARN_ON(1);
- return;
- }
- if (cw_min <= 0)
- cw_min = aCWmin;
- if (cw_max <= 0)
- cw_max = aCWmin;
- bslots = b43_read16(dev, B43_MMIO_RNG) % cw_min;
+ bslots = b43_read16(dev, B43_MMIO_RNG) & p->cw_min;
memset(¶ms, 0, sizeof(params));
params[B43_QOSPARAM_TXOP] = p->txop * 32;
- params[B43_QOSPARAM_CWMIN] = cw_min;
- params[B43_QOSPARAM_CWMAX] = cw_max;
- params[B43_QOSPARAM_CWCUR] = cw_min;
- params[B43_QOSPARAM_AIFS] = aifs;
+ params[B43_QOSPARAM_CWMIN] = p->cw_min;
+ params[B43_QOSPARAM_CWMAX] = p->cw_max;
+ params[B43_QOSPARAM_CWCUR] = p->cw_min;
+ params[B43_QOSPARAM_AIFS] = p->aifs;
params[B43_QOSPARAM_BSLOTS] = bslots;
- params[B43_QOSPARAM_REGGAP] = bslots + aifs;
+ params[B43_QOSPARAM_REGGAP] = bslots + p->aifs;
for (i = 0; i < ARRAY_SIZE(params); i++) {
if (i == B43_QOSPARAM_STATUS) {
}
}
-/* Update the QOS parameters in hardware. */
-static void b43_qos_update(struct b43_wldev *dev)
+/* Mapping of mac80211 queue numbers to b43 QoS SHM offsets. */
+static const u16 b43_qos_shm_offsets[] = {
+ /* [mac80211-queue-nr] = SHM_OFFSET, */
+ [0] = B43_QOS_VOICE,
+ [1] = B43_QOS_VIDEO,
+ [2] = B43_QOS_BESTEFFORT,
+ [3] = B43_QOS_BACKGROUND,
+};
+
+/* Update all QOS parameters in hardware. */
+static void b43_qos_upload_all(struct b43_wldev *dev)
{
struct b43_wl *wl = dev->wl;
struct b43_qos_params *params;
- unsigned long flags;
unsigned int i;
- /* Mapping of mac80211 queues to b43 SHM offsets. */
- static const u16 qos_shm_offsets[] = {
- [0] = B43_QOS_VOICE,
- [1] = B43_QOS_VIDEO,
- [2] = B43_QOS_BESTEFFORT,
- [3] = B43_QOS_BACKGROUND,
- };
- BUILD_BUG_ON(ARRAY_SIZE(qos_shm_offsets) != ARRAY_SIZE(wl->qos_params));
+ BUILD_BUG_ON(ARRAY_SIZE(b43_qos_shm_offsets) !=
+ ARRAY_SIZE(wl->qos_params));
b43_mac_suspend(dev);
- spin_lock_irqsave(&wl->irq_lock, flags);
-
for (i = 0; i < ARRAY_SIZE(wl->qos_params); i++) {
params = &(wl->qos_params[i]);
- if (params->need_hw_update) {
- b43_qos_params_upload(dev, &(params->p),
- qos_shm_offsets[i]);
- params->need_hw_update = 0;
- }
+ b43_qos_params_upload(dev, &(params->p),
+ b43_qos_shm_offsets[i]);
}
-
- spin_unlock_irqrestore(&wl->irq_lock, flags);
b43_mac_enable(dev);
}
struct b43_qos_params *params;
unsigned int i;
+ /* Initialize QoS parameters to sane defaults. */
+
+ BUILD_BUG_ON(ARRAY_SIZE(b43_qos_shm_offsets) !=
+ ARRAY_SIZE(wl->qos_params));
+
for (i = 0; i < ARRAY_SIZE(wl->qos_params); i++) {
params = &(wl->qos_params[i]);
- memset(&(params->p), 0, sizeof(params->p));
- params->p.aifs = -1;
- params->need_hw_update = 1;
+ switch (b43_qos_shm_offsets[i]) {
+ case B43_QOS_VOICE:
+ params->p.txop = 0;
+ params->p.aifs = 2;
+ params->p.cw_min = 0x0001;
+ params->p.cw_max = 0x0001;
+ break;
+ case B43_QOS_VIDEO:
+ params->p.txop = 0;
+ params->p.aifs = 2;
+ params->p.cw_min = 0x0001;
+ params->p.cw_max = 0x0001;
+ break;
+ case B43_QOS_BESTEFFORT:
+ params->p.txop = 0;
+ params->p.aifs = 3;
+ params->p.cw_min = 0x0001;
+ params->p.cw_max = 0x03FF;
+ break;
+ case B43_QOS_BACKGROUND:
+ params->p.txop = 0;
+ params->p.aifs = 7;
+ params->p.cw_min = 0x0001;
+ params->p.cw_max = 0x03FF;
+ break;
+ default:
+ B43_WARN_ON(1);
+ }
}
}
/* Initialize the core's QOS capabilities */
static void b43_qos_init(struct b43_wldev *dev)
{
- struct b43_wl *wl = dev->wl;
- unsigned int i;
-
/* Upload the current QOS parameters. */
- for (i = 0; i < ARRAY_SIZE(wl->qos_params); i++)
- wl->qos_params[i].need_hw_update = 1;
- b43_qos_update(dev);
+ b43_qos_upload_all(dev);
/* Enable QOS support. */
b43_hf_write(dev, b43_hf_read(dev) | B43_HF_EDCF);
| B43_MMIO_IFSCTL_USE_EDCF);
}
-static void b43_qos_update_work(struct work_struct *work)
-{
- struct b43_wl *wl = container_of(work, struct b43_wl, qos_update_work);
- struct b43_wldev *dev;
-
- mutex_lock(&wl->mutex);
- dev = wl->current_dev;
- if (likely(dev && (b43_status(dev) >= B43_STAT_INITIALIZED)))
- b43_qos_update(dev);
- mutex_unlock(&wl->mutex);
-}
-
-static int b43_op_conf_tx(struct ieee80211_hw *hw,
- int _queue,
+static int b43_op_conf_tx(struct ieee80211_hw *hw, u16 _queue,
const struct ieee80211_tx_queue_params *params)
{
struct b43_wl *wl = hw_to_b43_wl(hw);
- unsigned long flags;
+ struct b43_wldev *dev;
unsigned int queue = (unsigned int)_queue;
- struct b43_qos_params *p;
+ int err = -ENODEV;
if (queue >= ARRAY_SIZE(wl->qos_params)) {
/* Queue not available or don't support setting
* confuse mac80211. */
return 0;
}
+ BUILD_BUG_ON(ARRAY_SIZE(b43_qos_shm_offsets) !=
+ ARRAY_SIZE(wl->qos_params));
- spin_lock_irqsave(&wl->irq_lock, flags);
- p = &(wl->qos_params[queue]);
- memcpy(&(p->p), params, sizeof(p->p));
- p->need_hw_update = 1;
- spin_unlock_irqrestore(&wl->irq_lock, flags);
+ mutex_lock(&wl->mutex);
+ dev = wl->current_dev;
+ if (unlikely(!dev || (b43_status(dev) < B43_STAT_INITIALIZED)))
+ goto out_unlock;
- queue_work(hw->workqueue, &wl->qos_update_work);
+ memcpy(&(wl->qos_params[queue].p), params, sizeof(*params));
+ b43_mac_suspend(dev);
+ b43_qos_params_upload(dev, &(wl->qos_params[queue].p),
+ b43_qos_shm_offsets[queue]);
+ b43_mac_enable(dev);
+ err = 0;
- return 0;
+out_unlock:
+ mutex_unlock(&wl->mutex);
+
+ return err;
}
static int b43_op_get_tx_stats(struct ieee80211_hw *hw,
/* Switch to the requested channel.
* The firmware takes care of races with the TX handler. */
if (conf->channel->hw_value != phy->channel)
- b43_radio_selectchannel(dev, conf->channel->hw_value, 0);
+ b43_switch_channel(dev, conf->channel->hw_value);
/* Enable/Disable ShortSlot timing. */
if ((!!(conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME)) !=
/* Adjust the desired TX power level. */
if (conf->power_level != 0) {
- if (conf->power_level != phy->power_level) {
- phy->power_level = conf->power_level;
- b43_phy_xmitpower(dev);
+ spin_lock_irqsave(&wl->irq_lock, flags);
+ if (conf->power_level != phy->desired_txpower) {
+ phy->desired_txpower = conf->power_level;
+ b43_phy_txpower_check(dev, B43_TXPWR_IGNORE_TIME |
+ B43_TXPWR_IGNORE_TSSI);
}
+ spin_unlock_irqrestore(&wl->irq_lock, flags);
}
/* Antennas for RX and management frame TX. */
antenna = b43_antenna_from_ieee80211(dev, conf->antenna_sel_tx);
b43_mgmtframe_txantenna(dev, antenna);
antenna = b43_antenna_from_ieee80211(dev, conf->antenna_sel_rx);
- b43_set_rx_antenna(dev, antenna);
+ if (phy->ops->set_rx_antenna)
+ phy->ops->set_rx_antenna(dev, antenna);
- /* Update templates for AP mode. */
- if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP))
+ /* Update templates for AP/mesh mode. */
+ if (b43_is_mode(wl, NL80211_IFTYPE_AP) ||
+ b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT))
b43_set_beacon_int(dev, conf->beacon_int);
if (!!conf->radio_enabled != phy->radio_on) {
if (conf->radio_enabled) {
- b43_radio_turn_on(dev);
+ b43_software_rfkill(dev, RFKILL_STATE_UNBLOCKED);
b43info(dev->wl, "Radio turned on by software\n");
if (!dev->radio_hw_enable) {
b43info(dev->wl, "The hardware RF-kill button "
"Press the button to turn it on.\n");
}
} else {
- b43_radio_turn_off(dev, 0);
+ b43_software_rfkill(dev, RFKILL_STATE_SOFT_BLOCKED);
b43info(dev->wl, "Radio turned off by software\n");
}
}
u8 algorithm;
u8 index;
int err;
- DECLARE_MAC_BUF(mac);
if (modparam_nohwcrypt)
return -ENOSPC; /* User disabled HW-crypto */
if (!dev || b43_status(dev) < B43_STAT_INITIALIZED)
goto out_unlock;
+ if (dev->fw.pcm_request_failed) {
+ /* We don't have firmware for the crypto engine.
+ * Must use software-crypto. */
+ err = -EOPNOTSUPP;
+ goto out_unlock;
+ }
+
err = -EINVAL;
switch (key->alg) {
case ALG_WEP:
mutex_unlock(&wl->mutex);
if (!err) {
b43dbg(wl, "%s hardware based encryption for keyidx: %d, "
- "mac: %s\n",
+ "mac: %pM\n",
cmd == SET_KEY ? "Using" : "Disabling", key->keyidx,
- print_mac(mac, addr));
+ addr);
}
return err;
}
else
memset(wl->bssid, 0, ETH_ALEN);
if (b43_status(dev) >= B43_STAT_INITIALIZED) {
- if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP)) {
- B43_WARN_ON(conf->type != IEEE80211_IF_TYPE_AP);
- b43_set_ssid(dev, conf->ssid, conf->ssid_len);
- if (conf->beacon) {
- b43_update_templates(wl, conf->beacon,
- conf->beacon_control);
- }
+ if (b43_is_mode(wl, NL80211_IFTYPE_AP) ||
+ b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT)) {
+ B43_WARN_ON(vif->type != wl->if_type);
+ if (conf->changed & IEEE80211_IFCC_SSID)
+ b43_set_ssid(dev, conf->ssid, conf->ssid_len);
+ if (conf->changed & IEEE80211_IFCC_BEACON)
+ b43_update_templates(wl);
+ } else if (b43_is_mode(wl, NL80211_IFTYPE_ADHOC)) {
+ if (conf->changed & IEEE80211_IFCC_BEACON)
+ b43_update_templates(wl);
}
b43_write_mac_bssid_templates(dev);
}
/* Start data flow (TX/RX). */
b43_mac_enable(dev);
b43_interrupt_enable(dev, dev->irq_savedstate);
- ieee80211_start_queues(dev->wl->hw);
/* Start maintainance work */
b43_periodic_tasks_setup(dev);
static void setup_struct_phy_for_init(struct b43_wldev *dev,
struct b43_phy *phy)
{
- struct b43_txpower_lo_control *lo;
- int i;
-
- memset(phy->minlowsig, 0xFF, sizeof(phy->minlowsig));
- memset(phy->minlowsigpos, 0, sizeof(phy->minlowsigpos));
-
- phy->aci_enable = 0;
- phy->aci_wlan_automatic = 0;
- phy->aci_hw_rssi = 0;
-
- phy->radio_off_context.valid = 0;
-
- lo = phy->lo_control;
- if (lo) {
- memset(lo, 0, sizeof(*(phy->lo_control)));
- lo->tx_bias = 0xFF;
- INIT_LIST_HEAD(&lo->calib_list);
- }
- phy->max_lb_gain = 0;
- phy->trsw_rx_gain = 0;
- phy->txpwr_offset = 0;
-
- /* NRSSI */
- phy->nrssislope = 0;
- for (i = 0; i < ARRAY_SIZE(phy->nrssi); i++)
- phy->nrssi[i] = -1000;
- for (i = 0; i < ARRAY_SIZE(phy->nrssi_lt); i++)
- phy->nrssi_lt[i] = i;
-
- phy->lofcal = 0xFFFF;
- phy->initval = 0xFFFF;
-
- phy->interfmode = B43_INTERFMODE_NONE;
- phy->channel = 0xFF;
-
phy->hardware_power_control = !!modparam_hwpctl;
-
+ phy->next_txpwr_check_time = jiffies;
/* PHY TX errors counter. */
atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT);
-
- /* OFDM-table address caching. */
- phy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_UNKNOWN;
}
static void setup_struct_wldev_for_init(struct b43_wldev *dev)
pu_delay = 3700;
else
pu_delay = 1050;
- if (b43_is_mode(dev->wl, IEEE80211_IF_TYPE_IBSS) || idle)
+ if (b43_is_mode(dev->wl, NL80211_IFTYPE_ADHOC) || idle)
pu_delay = 500;
if ((dev->phy.radio_ver == 0x2050) && (dev->phy.radio_rev == 8))
pu_delay = max(pu_delay, (u16)2400);
u16 pretbtt;
/* The time value is in microseconds. */
- if (b43_is_mode(dev->wl, IEEE80211_IF_TYPE_IBSS)) {
+ if (b43_is_mode(dev->wl, NL80211_IFTYPE_ADHOC)) {
pretbtt = 2;
} else {
if (dev->phy.type == B43_PHYTYPE_A)
/* Locking: wl->mutex */
static void b43_wireless_core_exit(struct b43_wldev *dev)
{
- struct b43_phy *phy = &dev->phy;
u32 macctl;
B43_WARN_ON(b43_status(dev) > B43_STAT_INITIALIZED);
b43_dma_free(dev);
b43_pio_free(dev);
b43_chip_exit(dev);
- b43_radio_turn_off(dev, 1);
- b43_switch_analog(dev, 0);
- if (phy->dyn_tssi_tbl)
- kfree(phy->tssi2dbm);
- kfree(phy->lo_control);
- phy->lo_control = NULL;
+ dev->phy.ops->switch_analog(dev, 0);
if (dev->wl->current_beacon) {
dev_kfree_skb_any(dev->wl->current_beacon);
dev->wl->current_beacon = NULL;
b43_wireless_core_reset(dev, tmp);
}
- if ((phy->type == B43_PHYTYPE_B) || (phy->type == B43_PHYTYPE_G)) {
- phy->lo_control =
- kzalloc(sizeof(*(phy->lo_control)), GFP_KERNEL);
- if (!phy->lo_control) {
- err = -ENOMEM;
- goto err_busdown;
- }
- }
+ /* Reset all data structures. */
setup_struct_wldev_for_init(dev);
-
- err = b43_phy_init_tssi2dbm_table(dev);
- if (err)
- goto err_kfree_lo_control;
+ phy->ops->prepare_structs(dev);
/* Enable IRQ routing to this device. */
ssb_pcicore_dev_irqvecs_enable(&bus->pcicore, dev->dev);
b43_imcfglo_timeouts_workaround(dev);
b43_bluetooth_coext_disable(dev);
- b43_phy_early_init(dev);
+ if (phy->ops->prepare_hardware) {
+ err = phy->ops->prepare_hardware(dev);
+ if (err)
+ goto err_busdown;
+ }
err = b43_chip_init(dev);
if (err)
- goto err_kfree_tssitbl;
+ goto err_busdown;
b43_shm_write16(dev, B43_SHM_SHARED,
B43_SHM_SH_WLCOREREV, dev->dev->id.revision);
hf = b43_hf_read(dev);
out:
return err;
- err_chip_exit:
+err_chip_exit:
b43_chip_exit(dev);
- err_kfree_tssitbl:
- if (phy->dyn_tssi_tbl)
- kfree(phy->tssi2dbm);
- err_kfree_lo_control:
- kfree(phy->lo_control);
- phy->lo_control = NULL;
- err_busdown:
+err_busdown:
ssb_bus_may_powerdown(bus);
B43_WARN_ON(b43_status(dev) != B43_STAT_UNINIT);
return err;
/* TODO: allow WDS/AP devices to coexist */
- if (conf->type != IEEE80211_IF_TYPE_AP &&
- conf->type != IEEE80211_IF_TYPE_STA &&
- conf->type != IEEE80211_IF_TYPE_WDS &&
- conf->type != IEEE80211_IF_TYPE_IBSS)
+ if (conf->type != NL80211_IFTYPE_AP &&
+ conf->type != NL80211_IFTYPE_MESH_POINT &&
+ conf->type != NL80211_IFTYPE_STATION &&
+ conf->type != NL80211_IFTYPE_WDS &&
+ conf->type != NL80211_IFTYPE_ADHOC)
return -EOPNOTSUPP;
mutex_lock(&wl->mutex);
wl->filter_flags = 0;
wl->radiotap_enabled = 0;
b43_qos_clear(wl);
+ wl->beacon0_uploaded = 0;
+ wl->beacon1_uploaded = 0;
+ wl->beacon_templates_virgin = 1;
/* First register RFkill.
* LEDs that are registered later depend on it. */
struct b43_wldev *dev = wl->current_dev;
b43_rfkill_exit(dev);
- cancel_work_sync(&(wl->qos_update_work));
cancel_work_sync(&(wl->beacon_update_trigger));
mutex_lock(&wl->mutex);
b43_wireless_core_stop(dev);
b43_wireless_core_exit(dev);
mutex_unlock(&wl->mutex);
+
+ cancel_work_sync(&(wl->txpower_adjust_work));
}
static int b43_op_set_retry_limit(struct ieee80211_hw *hw,
return err;
}
-static int b43_op_beacon_set_tim(struct ieee80211_hw *hw, int aid, int set)
+static int b43_op_beacon_set_tim(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta, bool set)
{
struct b43_wl *wl = hw_to_b43_wl(hw);
- struct sk_buff *beacon;
unsigned long flags;
- struct ieee80211_tx_control txctl;
- /* We could modify the existing beacon and set the aid bit in
- * the TIM field, but that would probably require resizing and
- * moving of data within the beacon template.
- * Simply request a new beacon and let mac80211 do the hard work. */
- beacon = ieee80211_beacon_get(hw, wl->vif, &txctl);
- if (unlikely(!beacon))
- return -ENOMEM;
spin_lock_irqsave(&wl->irq_lock, flags);
- b43_update_templates(wl, beacon, &txctl);
- spin_unlock_irqrestore(&wl->irq_lock, flags);
-
- return 0;
-}
-
-static int b43_op_ibss_beacon_update(struct ieee80211_hw *hw,
- struct sk_buff *beacon,
- struct ieee80211_tx_control *ctl)
-{
- struct b43_wl *wl = hw_to_b43_wl(hw);
- unsigned long flags;
-
- spin_lock_irqsave(&wl->irq_lock, flags);
- b43_update_templates(wl, beacon, ctl);
+ b43_update_templates(wl);
spin_unlock_irqrestore(&wl->irq_lock, flags);
return 0;
static void b43_op_sta_notify(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
enum sta_notify_cmd notify_cmd,
- const u8 *addr)
+ struct ieee80211_sta *sta)
{
struct b43_wl *wl = hw_to_b43_wl(hw);
.stop = b43_op_stop,
.set_retry_limit = b43_op_set_retry_limit,
.set_tim = b43_op_beacon_set_tim,
- .beacon_update = b43_op_ibss_beacon_update,
.sta_notify = b43_op_sta_notify,
};
goto out;
}
}
- out:
+out:
+ if (err)
+ wl->current_dev = NULL; /* Failed to init the dev. */
mutex_unlock(&wl->mutex);
if (err)
b43err(wl, "Controller restart FAILED\n");
/* We release firmware that late to not be required to re-request
* is all the time when we reinit the core. */
b43_release_firmware(dev);
+ b43_phy_free(dev);
}
static int b43_wireless_core_attach(struct b43_wldev *dev)
}
}
+ err = b43_phy_allocate(dev);
+ if (err)
+ goto err_powerdown;
+
dev->phy.gmode = have_2ghz_phy;
tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0;
b43_wireless_core_reset(dev, tmp);
err = b43_validate_chipaccess(dev);
if (err)
- goto err_powerdown;
+ goto err_phy_free;
err = b43_setup_bands(dev, have_2ghz_phy, have_5ghz_phy);
if (err)
- goto err_powerdown;
+ goto err_phy_free;
/* Now set some default "current_dev" */
if (!wl->current_dev)
wl->current_dev = dev;
INIT_WORK(&dev->restart_work, b43_chip_reset);
- b43_radio_turn_off(dev, 1);
- b43_switch_analog(dev, 0);
+ dev->phy.ops->switch_analog(dev, 0);
ssb_device_disable(dev->dev, 0);
ssb_bus_may_powerdown(bus);
out:
return err;
+err_phy_free:
+ b43_phy_free(dev);
err_powerdown:
ssb_bus_may_powerdown(bus);
return err;
struct b43_wldev *wldev;
struct b43_wl *wl;
+ /* Do not cancel ieee80211-workqueue based work here.
+ * See comment in b43_remove(). */
+
wldev = ssb_get_drvdata(dev);
wl = wldev->wl;
- cancel_work_sync(&wldev->restart_work);
b43_debugfs_remove_device(wldev);
b43_wireless_core_detach(wldev);
list_del(&wldev->list);
if (bus->bustype == SSB_BUSTYPE_PCI) {
pdev = bus->host_pci;
if (IS_PDEV(pdev, BROADCOM, 0x4318, ASUSTEK, 0x100F) ||
+ IS_PDEV(pdev, BROADCOM, 0x4320, DELL, 0x0003) ||
+ IS_PDEV(pdev, BROADCOM, 0x4320, HP, 0x12f8) ||
IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0015) ||
- IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0013))
+ IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0014) ||
+ IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0013) ||
+ IS_PDEV(pdev, BROADCOM, 0x4320, MOTOROLA, 0x7010))
bus->sprom.boardflags_lo &= ~B43_BFL_BTCOEXIST;
}
}
}
/* fill hw info */
- hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
- IEEE80211_HW_RX_INCLUDES_FCS;
- hw->max_signal = 100;
- hw->max_rssi = -110;
- hw->max_noise = -110;
+ hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
+ IEEE80211_HW_SIGNAL_DBM |
+ IEEE80211_HW_NOISE_DBM;
+
+ hw->wiphy->interface_modes =
+ BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_MESH_POINT) |
+ BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_WDS) |
+ BIT(NL80211_IFTYPE_ADHOC);
+
hw->queues = b43_modparam_qos ? 4 : 1;
+ hw->max_altrates = 1;
SET_IEEE80211_DEV(hw, dev->dev);
if (is_valid_ether_addr(sprom->et1mac))
SET_IEEE80211_PERM_ADDR(hw, sprom->et1mac);
spin_lock_init(&wl->shm_lock);
mutex_init(&wl->mutex);
INIT_LIST_HEAD(&wl->devlist);
- INIT_WORK(&wl->qos_update_work, b43_qos_update_work);
INIT_WORK(&wl->beacon_update_trigger, b43_beacon_update_trigger_work);
+ INIT_WORK(&wl->txpower_adjust_work, b43_phy_txpower_adjust_work);
ssb_set_devtypedata(dev, wl);
b43info(wl, "Broadcom %04X WLAN found\n", dev->bus->chip_id);
struct b43_wl *wl = ssb_get_devtypedata(dev);
struct b43_wldev *wldev = ssb_get_drvdata(dev);
+ /* We must cancel any work here before unregistering from ieee80211,
+ * as the ieee80211 unreg will destroy the workqueue. */
+ cancel_work_sync(&wldev->restart_work);
+
B43_WARN_ON(!wl);
if (wl->current_dev == wldev)
ieee80211_unregister_hw(wl->hw);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff