"reset status %d\n",
channel->center_freq, r);
spin_unlock_bh(&sc->sc_resetlock);
- return r;
+ goto ps_restore;
}
spin_unlock_bh(&sc->sc_resetlock);
if (ath_startrecv(sc) != 0) {
DPRINTF(sc, ATH_DBG_FATAL,
"Unable to restart recv logic\n");
- return -EIO;
+ r = -EIO;
+ goto ps_restore;
}
ath_cache_conf_rate(sc, &hw->conf);
ath_update_txpow(sc);
ath9k_hw_set_interrupts(ah, sc->imask);
+
+ ps_restore:
ath9k_ps_restore(sc);
- return 0;
+ return r;
}
/*
* don't calibrate when we're scanning.
* we are most likely not on our home channel.
*/
+ spin_lock(&sc->ani_lock);
if (sc->sc_flags & SC_OP_SCANNING)
goto set_timer;
ath9k_ps_restore(sc);
set_timer:
+ spin_unlock(&sc->ani_lock);
/*
* Set timer interval based on previous results.
* The interval must be the shortest necessary to satisfy ANI,
an->maxampdu = 1 << (IEEE80211_HTCAP_MAXRXAMPDU_FACTOR +
sta->ht_cap.ampdu_factor);
an->mpdudensity = parse_mpdudensity(sta->ht_cap.ampdu_density);
+ an->last_rssi = ATH_RSSI_DUMMY_MARKER;
}
}
{
#define ATH9K_HT_CAP_MAXRXAMPDU_65536 0x3 /* 2 ^ 16 */
#define ATH9K_HT_CAP_MPDUDENSITY_8 0x6 /* 8 usec */
+ u8 tx_streams, rx_streams;
ht_info->ht_supported = true;
ht_info->cap = IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
/* set up supported mcs set */
memset(&ht_info->mcs, 0, sizeof(ht_info->mcs));
+ tx_streams = !(sc->tx_chainmask & (sc->tx_chainmask - 1)) ? 1 : 2;
+ rx_streams = !(sc->rx_chainmask & (sc->rx_chainmask - 1)) ? 1 : 2;
- switch(sc->rx_chainmask) {
- case 1:
- ht_info->mcs.rx_mask[0] = 0xff;
- break;
- case 3:
- case 5:
- case 7:
- default:
- ht_info->mcs.rx_mask[0] = 0xff;
- ht_info->mcs.rx_mask[1] = 0xff;
- break;
+ if (tx_streams != rx_streams) {
+ DPRINTF(sc, ATH_DBG_CONFIG, "TX streams %d, RX streams: %d\n",
+ tx_streams, rx_streams);
+ ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF;
+ ht_info->mcs.tx_params |= ((tx_streams - 1) <<
+ IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT);
}
- ht_info->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
+ ht_info->mcs.rx_mask[0] = 0xff;
+ if (rx_streams >= 2)
+ ht_info->mcs.rx_mask[1] = 0xff;
+
+ ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_DEFINED;
}
static void ath9k_bss_assoc_info(struct ath_softc *sc,
struct ieee80211_vif *vif,
struct ieee80211_bss_conf *bss_conf)
{
- struct ath_vif *avp = (void *)vif->drv_priv;
if (bss_conf->assoc) {
DPRINTF(sc, ATH_DBG_CONFIG, "Bss Info ASSOC %d, bssid: %pM\n",
bss_conf->aid, sc->curbssid);
/* New association, store aid */
- if (avp->av_opmode == NL80211_IFTYPE_STATION) {
- sc->curaid = bss_conf->aid;
- ath9k_hw_write_associd(sc);
+ sc->curaid = bss_conf->aid;
+ ath9k_hw_write_associd(sc);
- /*
- * Request a re-configuration of Beacon related timers
- * on the receipt of the first Beacon frame (i.e.,
- * after time sync with the AP).
- */
- sc->sc_flags |= SC_OP_BEACON_SYNC;
- }
+ /*
+ * Request a re-configuration of Beacon related timers
+ * on the receipt of the first Beacon frame (i.e.,
+ * after time sync with the AP).
+ */
+ sc->sc_flags |= SC_OP_BEACON_SYNC;
/* Configure the beacon */
ath_beacon_config(sc, vif);
} else {
DPRINTF(sc, ATH_DBG_CONFIG, "Bss Info DISASSOC\n");
sc->curaid = 0;
+ /* Stop ANI */
+ del_timer_sync(&sc->ani.timer);
}
}
ath9k_hw_phy_disable(ah);
ath9k_hw_configpcipowersave(ah, 1);
- ath9k_hw_setpower(ah, ATH9K_PM_FULL_SLEEP);
ath9k_ps_restore(sc);
+ ath9k_hw_setpower(ah, ATH9K_PM_FULL_SLEEP);
}
/*******************/
ath_deinit_leds(sc);
cancel_work_sync(&sc->chan_work);
cancel_delayed_work_sync(&sc->wiphy_work);
+ cancel_delayed_work_sync(&sc->tx_complete_work);
for (i = 0; i < sc->num_sec_wiphy; i++) {
struct ath_wiphy *aphy = sc->sec_wiphy[i];
ath9k_hw_detach(sc->sc_ah);
ath9k_exit_debug(sc);
- ath9k_ps_restore(sc);
}
static int ath9k_reg_notifier(struct wiphy *wiphy,
spin_lock_init(&sc->wiphy_lock);
spin_lock_init(&sc->sc_resetlock);
spin_lock_init(&sc->sc_serial_rw);
+ spin_lock_init(&sc->ani_lock);
+ spin_lock_init(&sc->sc_pm_lock);
mutex_init(&sc->mutex);
tasklet_init(&sc->intr_tq, ath9k_tasklet, (unsigned long)sc);
tasklet_init(&sc->bcon_tasklet, ath_beacon_tasklet,
hw->max_rates = 4;
hw->channel_change_time = 5000;
hw->max_listen_interval = 10;
- hw->max_rate_tries = ATH_11N_TXMAXTRY;
+ /* Hardware supports 10 but we use 4 */
+ hw->max_rate_tries = 4;
hw->sta_data_size = sizeof(struct ath_node);
hw->vif_data_size = sizeof(struct ath_vif);
ieee80211_wake_queues(hw);
+ queue_delayed_work(sc->hw->workqueue, &sc->tx_complete_work, 0);
+
mutex_unlock:
mutex_unlock(&sc->mutex);
ath9k_hw_set_interrupts(sc->sc_ah, sc->imask);
- if (conf->type == NL80211_IFTYPE_AP)
+ if (conf->type == NL80211_IFTYPE_AP ||
+ conf->type == NL80211_IFTYPE_ADHOC ||
+ conf->type == NL80211_IFTYPE_MONITOR)
ath_start_ani(sc);
out:
aphy->state = ATH_WIPHY_SCAN;
ath9k_wiphy_pause_all_forced(sc, aphy);
- mutex_lock(&sc->mutex);
+ spin_lock_bh(&sc->ani_lock);
sc->sc_flags |= SC_OP_SCANNING;
- mutex_unlock(&sc->mutex);
+ spin_unlock_bh(&sc->ani_lock);
}
static void ath9k_sw_scan_complete(struct ieee80211_hw *hw)
struct ath_wiphy *aphy = hw->priv;
struct ath_softc *sc = aphy->sc;
- mutex_lock(&sc->mutex);
+ spin_lock_bh(&sc->ani_lock);
aphy->state = ATH_WIPHY_ACTIVE;
sc->sc_flags &= ~SC_OP_SCANNING;
sc->sc_flags |= SC_OP_FULL_RESET;
- mutex_unlock(&sc->mutex);
+ spin_unlock_bh(&sc->ani_lock);
}
struct ieee80211_ops ath9k_ops = {