/* Include Wireless Extension definition and check version - Jean II */
#include <linux/wireless.h>
-#define WIRELESS_SPY // enable iwspy support
-#include <net/iw_handler.h> // New driver API
+#define WIRELESS_SPY /* enable iwspy support */
+#include <net/iw_handler.h> /* New driver API */
-#define CISCO_EXT // enable Cisco extensions
+#define CISCO_EXT /* enable Cisco extensions */
#ifdef CISCO_EXT
#include <linux/delay.h>
#endif
/* This is a kind of sloppy hack to get this information to OUT4500 and
IN4500. I would be extremely interested in the situation where this
doesn't work though!!! */
-static int do8bitIO = 0;
+static int do8bitIO /* = 0 */;
/* Return codes */
#define SUCCESS 0
#define MAXTXQ 64
/* BAP selectors */
-#define BAP0 0 // Used for receiving packets
-#define BAP1 2 // Used for xmiting packets and working with RIDS
+#define BAP0 0 /* Used for receiving packets */
+#define BAP1 2 /* Used for xmiting packets and working with RIDS */
/* Flags */
#define COMMAND_BUSY 0x8000
Cmd cmd;
Resp rsp;
- if ((ai->APList == NULL) &&
- (ai->APList = kmalloc(sizeof(APListRid), GFP_KERNEL)) == NULL)
+ if (!ai->APList)
+ ai->APList = kmalloc(sizeof(APListRid), GFP_KERNEL);
+ if (!ai->APList)
return -ENOMEM;
- if ((ai->SSID == NULL) &&
- (ai->SSID = kmalloc(sizeof(SsidRid), GFP_KERNEL)) == NULL)
+ if (!ai->SSID)
+ ai->SSID = kmalloc(sizeof(SsidRid), GFP_KERNEL);
+ if (!ai->SSID)
return -ENOMEM;
readAPListRid(ai, ai->APList);
readSsidRid(ai, ai->SSID);
disable_MAC(ai, 0);
netif_device_detach(dev);
ai->power = state;
- cmd.cmd=HOSTSLEEP;
+ cmd.cmd = HOSTSLEEP;
issuecommand(ai, &cmd, &rsp);
pci_enable_wake(pdev, pci_choose_state(pdev, state), 1);
msleep(100);
}
- set_bit (FLAG_COMMIT, &ai->flags);
+ set_bit(FLAG_COMMIT, &ai->flags);
disable_MAC(ai, 0);
msleep(200);
if (ai->SSID) {
static int __init airo_init_module( void )
{
int i;
-#if 0
- int have_isa_dev = 0;
-#endif
airo_entry = create_proc_entry("driver/aironet",
S_IFDIR | airo_perm,
airo_entry->gid = proc_gid;
}
- for( i = 0; i < 4 && io[i] && irq[i]; i++ ) {
+ for (i = 0; i < 4 && io[i] && irq[i]; i++) {
airo_print_info("", "Trying to configure ISA adapter at irq=%d "
"io=0x%x", irq[i], io[i] );
if (init_airo_card( irq[i], io[i], 0, NULL ))
-#if 0
- have_isa_dev = 1;
-#else
/* do nothing */ ;
-#endif
}
#ifdef CONFIG_PCI
static u8 airo_rssi_to_dbm (tdsRssiEntry *rssi_rid, u8 rssi)
{
- if( !rssi_rid )
+ if (!rssi_rid)
return 0;
return (0x100 - rssi_rid[rssi].rssidBm);
{
int i;
- if( !rssi_rid )
+ if (!rssi_rid)
return 0;
- for( i = 0; i < 256; i++ )
+ for (i = 0; i < 256; i++)
if (rssi_rid[i].rssidBm == dbm)
return rssi_rid[i].rssipct;
* format that the Wireless Tools will understand - Jean II
*/
static inline char *airo_translate_scan(struct net_device *dev,
+ struct iw_request_info *info,
char *current_ev,
char *end_buf,
BSSListRid *bss)
iwe.cmd = SIOCGIWAP;
iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
memcpy(iwe.u.ap_addr.sa_data, bss->bssid, ETH_ALEN);
- current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_ADDR_LEN);
+ current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+ &iwe, IW_EV_ADDR_LEN);
/* Other entries will be displayed in the order we give them */
iwe.u.data.length = 32;
iwe.cmd = SIOCGIWESSID;
iwe.u.data.flags = 1;
- current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, bss->ssid);
+ current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+ &iwe, bss->ssid);
/* Add mode */
iwe.cmd = SIOCGIWMODE;
iwe.u.mode = IW_MODE_MASTER;
else
iwe.u.mode = IW_MODE_ADHOC;
- current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_UINT_LEN);
+ current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+ &iwe, IW_EV_UINT_LEN);
}
/* Add frequency */
*/
iwe.u.freq.m = frequency_list[iwe.u.freq.m - 1] * 100000;
iwe.u.freq.e = 1;
- current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_FREQ_LEN);
+ current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+ &iwe, IW_EV_FREQ_LEN);
dBm = le16_to_cpu(bss->dBm);
| IW_QUAL_DBM;
}
iwe.u.qual.noise = ai->wstats.qual.noise;
- current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_QUAL_LEN);
+ current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+ &iwe, IW_EV_QUAL_LEN);
/* Add encryption capability */
iwe.cmd = SIOCGIWENCODE;
else
iwe.u.data.flags = IW_ENCODE_DISABLED;
iwe.u.data.length = 0;
- current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, bss->ssid);
+ current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+ &iwe, bss->ssid);
/* Rate : stuffing multiple values in a single event require a bit
* more of magic - Jean II */
- current_val = current_ev + IW_EV_LCP_LEN;
+ current_val = current_ev + iwe_stream_lcp_len(info);
iwe.cmd = SIOCGIWRATE;
/* Those two flags are ignored... */
/* Bit rate given in 500 kb/s units (+ 0x80) */
iwe.u.bitrate.value = ((bss->rates[i] & 0x7f) * 500000);
/* Add new value to event */
- current_val = iwe_stream_add_value(current_ev, current_val, end_buf, &iwe, IW_EV_PARAM_LEN);
+ current_val = iwe_stream_add_value(info, current_ev,
+ current_val, end_buf,
+ &iwe, IW_EV_PARAM_LEN);
}
/* Check if we added any event */
- if((current_val - current_ev) > IW_EV_LCP_LEN)
+ if ((current_val - current_ev) > iwe_stream_lcp_len(info))
current_ev = current_val;
/* Beacon interval */
iwe.cmd = IWEVCUSTOM;
sprintf(buf, "bcn_int=%d", bss->beaconInterval);
iwe.u.data.length = strlen(buf);
- current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, buf);
+ current_ev = iwe_stream_add_point(info, current_ev, end_buf,
+ &iwe, buf);
kfree(buf);
}
iwe.cmd = IWEVGENIE;
iwe.u.data.length = min(info_element->len + 2,
MAX_WPA_IE_LEN);
- current_ev = iwe_stream_add_point(current_ev, end_buf,
- &iwe, (char *) info_element);
+ current_ev = iwe_stream_add_point(
+ info, current_ev,
+ end_buf, &iwe,
+ (char *) info_element);
}
break;
iwe.cmd = IWEVGENIE;
iwe.u.data.length = min(info_element->len + 2,
MAX_WPA_IE_LEN);
- current_ev = iwe_stream_add_point(current_ev, end_buf,
- &iwe, (char *) info_element);
+ current_ev = iwe_stream_add_point(
+ info, current_ev, end_buf,
+ &iwe, (char *) info_element);
break;
default:
list_for_each_entry (net, &ai->network_list, list) {
/* Translate to WE format this entry */
- current_ev = airo_translate_scan(dev, current_ev,
+ current_ev = airo_translate_scan(dev, info, current_ev,
extra + dwrq->length,
&net->bss);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff