iwlwifi: Fix built-in compilation of iwlcore
[safe/jmp/linux-2.6] / drivers / net / wireless / adm8211.c
index 14d90a9..5c0d2b0 100644 (file)
@@ -48,6 +48,32 @@ static struct pci_device_id adm8211_pci_id_table[] __devinitdata = {
        { 0 }
 };
 
+static struct ieee80211_rate adm8211_rates[] = {
+       { .bitrate = 10, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+       { .bitrate = 20, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+       { .bitrate = 55, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+       { .bitrate = 110, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+       { .bitrate = 220, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, /* XX ?? */
+};
+
+static const struct ieee80211_channel adm8211_channels[] = {
+       { .center_freq = 2412},
+       { .center_freq = 2417},
+       { .center_freq = 2422},
+       { .center_freq = 2427},
+       { .center_freq = 2432},
+       { .center_freq = 2437},
+       { .center_freq = 2442},
+       { .center_freq = 2447},
+       { .center_freq = 2452},
+       { .center_freq = 2457},
+       { .center_freq = 2462},
+       { .center_freq = 2467},
+       { .center_freq = 2472},
+       { .center_freq = 2484},
+};
+
+
 static void adm8211_eeprom_register_read(struct eeprom_93cx6 *eeprom)
 {
        struct adm8211_priv *priv = eeprom->data;
@@ -155,17 +181,17 @@ static int adm8211_read_eeprom(struct ieee80211_hw *dev)
        printk(KERN_DEBUG "%s (adm8211): Channel range: %d - %d\n",
               pci_name(priv->pdev), (int)chan_range.min, (int)chan_range.max);
 
-       priv->modes[0].num_channels = chan_range.max - chan_range.min + 1;
-       priv->modes[0].channels = priv->channels;
+       BUILD_BUG_ON(sizeof(priv->channels) != sizeof(adm8211_channels));
 
-       memcpy(priv->channels, adm8211_channels, sizeof(adm8211_channels));
+       memcpy(priv->channels, adm8211_channels, sizeof(priv->channels));
+       priv->band.channels = priv->channels;
+       priv->band.n_channels = ARRAY_SIZE(adm8211_channels);
+       priv->band.bitrates = adm8211_rates;
+       priv->band.n_bitrates = ARRAY_SIZE(adm8211_rates);
 
        for (i = 1; i <= ARRAY_SIZE(adm8211_channels); i++)
-               if (i >= chan_range.min && i <= chan_range.max)
-                       priv->channels[i - 1].flag =
-                               IEEE80211_CHAN_W_SCAN |
-                               IEEE80211_CHAN_W_ACTIVE_SCAN |
-                               IEEE80211_CHAN_W_IBSS;
+               if (i < chan_range.min || i > chan_range.max)
+                       priv->channels[i - 1].flags |= IEEE80211_CHAN_DISABLED;
 
        switch (priv->eeprom->specific_bbptype) {
        case ADM8211_BBP_RFMD3000:
@@ -347,7 +373,6 @@ static void adm8211_interrupt_rci(struct ieee80211_hw *dev)
        unsigned int pktlen;
        struct sk_buff *skb, *newskb;
        unsigned int limit = priv->rx_ring_size;
-       static const u8 rate_tbl[] = {10, 20, 55, 110, 220};
        u8 rssi, rate;
 
        while (!(priv->rx_ring[entry].status & cpu_to_le32(RDES0_STATUS_OWN))) {
@@ -425,12 +450,10 @@ static void adm8211_interrupt_rci(struct ieee80211_hw *dev)
                        else
                                rx_status.ssi = 100 - rssi;
 
-                       if (rate <= 4)
-                               rx_status.rate = rate_tbl[rate];
+                       rx_status.rate_idx = rate;
 
-                       rx_status.channel = priv->channel;
-                       rx_status.freq = adm8211_channels[priv->channel - 1].freq;
-                       rx_status.phymode = MODE_IEEE80211B;
+                       rx_status.freq = adm8211_channels[priv->channel - 1].center_freq;
+                       rx_status.band = IEEE80211_BAND_2GHZ;
 
                        ieee80211_rx_irqsafe(dev, skb, &rx_status);
                }
@@ -465,9 +488,6 @@ do {                                                                           \
        if (stsr & ADM8211_STSR_TCI)
                adm8211_interrupt_tci(dev);
 
-       /*ADM8211_INT(LinkOn);*/
-       /*ADM8211_INT(LinkOff);*/
-
        ADM8211_INT(PCF);
        ADM8211_INT(BCNTC);
        ADM8211_INT(GPINT);
@@ -477,7 +497,6 @@ do {                                                                           \
        ADM8211_INT(SQL);
        ADM8211_INT(WEPTD);
        ADM8211_INT(ATIME);
-       /*ADM8211_INT(TBTT);*/
        ADM8211_INT(TEIS);
        ADM8211_INT(FBE);
        ADM8211_INT(REIS);
@@ -485,9 +504,6 @@ do {                                                                           \
        ADM8211_INT(RPS);
        ADM8211_INT(RDU);
        ADM8211_INT(TUF);
-       /*ADM8211_INT(TRT);*/
-       /*ADM8211_INT(TLT);*/
-       /*ADM8211_INT(TDU);*/
        ADM8211_INT(TPS);
 
        return IRQ_HANDLED;
@@ -1054,7 +1070,7 @@ static int adm8211_set_rate(struct ieee80211_hw *dev)
        if (priv->pdev->revision != ADM8211_REV_BA) {
                rate_buf[0] = ARRAY_SIZE(adm8211_rates);
                for (i = 0; i < ARRAY_SIZE(adm8211_rates); i++)
-                       rate_buf[i + 1] = (adm8211_rates[i].rate / 5) | 0x80;
+                       rate_buf[i + 1] = (adm8211_rates[i].bitrate / 5) | 0x80;
        } else {
                /* workaround for rev BA specific bug */
                rate_buf[0] = 0x04;
@@ -1086,7 +1102,7 @@ static void adm8211_hw_init(struct ieee80211_hw *dev)
        u32 reg;
        u8 cline;
 
-       reg = le32_to_cpu(ADM8211_CSR_READ(PAR));
+       reg = ADM8211_CSR_READ(PAR);
        reg |= ADM8211_PAR_MRLE | ADM8211_PAR_MRME;
        reg &= ~(ADM8211_PAR_BAR | ADM8211_PAR_CAL);
 
@@ -1303,16 +1319,18 @@ static int adm8211_set_ssid(struct ieee80211_hw *dev, u8 *ssid, size_t ssid_len)
 static int adm8211_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf)
 {
        struct adm8211_priv *priv = dev->priv;
+       int channel = ieee80211_frequency_to_channel(conf->channel->center_freq);
 
-       if (conf->channel != priv->channel) {
-               priv->channel = conf->channel;
+       if (channel != priv->channel) {
+               priv->channel = channel;
                adm8211_rf_set_channel(dev, priv->channel);
        }
 
        return 0;
 }
 
-static int adm8211_config_interface(struct ieee80211_hw *dev, int if_id,
+static int adm8211_config_interface(struct ieee80211_hw *dev,
+                                   struct ieee80211_vif *vif,
                                    struct ieee80211_if_conf *conf)
 {
        struct adm8211_priv *priv = dev->priv;
@@ -1677,13 +1695,9 @@ static int adm8211_tx(struct ieee80211_hw *dev, struct sk_buff *skb,
        int plcp, dur, len, plcp_signal, short_preamble;
        struct ieee80211_hdr *hdr;
 
-       if (control->tx_rate < 0) {
-               short_preamble = 1;
-               plcp_signal = -control->tx_rate;
-       } else {
-               short_preamble = 0;
-               plcp_signal = control->tx_rate;
-       }
+       short_preamble = !!(control->tx_rate->flags &
+                                       IEEE80211_TXCTL_SHORT_PREAMBLE);
+       plcp_signal = control->tx_rate->bitrate;
 
        hdr = (struct ieee80211_hdr *)skb->data;
        fc = le16_to_cpu(hdr->frame_control) & ~IEEE80211_FCTL_PROTECTED;
@@ -1879,18 +1893,11 @@ static int __devinit adm8211_probe(struct pci_dev *pdev,
        SET_IEEE80211_PERM_ADDR(dev, perm_addr);
 
        dev->extra_tx_headroom = sizeof(struct adm8211_tx_hdr);
-       dev->flags = IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED;
-       /* IEEE80211_HW_RX_INCLUDES_FCS in promisc mode */
+       /* dev->flags = IEEE80211_HW_RX_INCLUDES_FCS in promisc mode */
 
        dev->channel_change_time = 1000;
        dev->max_rssi = 100;    /* FIXME: find better value */
 
-       priv->modes[0].mode = MODE_IEEE80211B;
-       /* channel info filled in by adm8211_read_eeprom */
-       memcpy(priv->rates, adm8211_rates, sizeof(adm8211_rates));
-       priv->modes[0].num_rates = ARRAY_SIZE(adm8211_rates);
-       priv->modes[0].rates = priv->rates;
-
        dev->queues = 1; /* ADM8211C supports more, maybe ADM8211B too */
 
        priv->retry_limit = 3;
@@ -1916,14 +1923,9 @@ static int __devinit adm8211_probe(struct pci_dev *pdev,
                goto err_free_desc;
        }
 
-       priv->channel = priv->modes[0].channels[0].chan;
+       priv->channel = 1;
 
-       err = ieee80211_register_hwmode(dev, &priv->modes[0]);
-       if (err) {
-               printk(KERN_ERR "%s (adm8211): Can't register hwmode\n",
-                      pci_name(pdev));
-               goto err_free_desc;
-       }
+       dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band;
 
        err = ieee80211_register_hw(dev);
        if (err) {