# Wireless LAN device configuration
#
-menu "Wireless LAN (non-hamradio)"
- depends on NETDEVICES
+menu "Wireless LAN"
+ depends on !S390
-config NET_RADIO
- bool "Wireless LAN drivers (non-hamradio) & Wireless Extensions"
+config WLAN_PRE80211
+ bool "Wireless LAN (pre-802.11)"
+ depends on NETDEVICES
---help---
- Support for wireless LANs and everything having to do with radio,
- but not with amateur radio or FM broadcasting.
-
- Saying Y here also enables the Wireless Extensions (creates
- /proc/net/wireless and enables iwconfig access). The Wireless
- Extension is a generic API allowing a driver to expose to the user
- space configuration and statistics specific to common Wireless LANs.
- The beauty of it is that a single set of tool can support all the
- variations of Wireless LANs, regardless of their type (as long as
- the driver supports Wireless Extension). Another advantage is that
- these parameters may be changed on the fly without restarting the
- driver (or Linux). If you wish to use Wireless Extensions with
- wireless PCMCIA (PC-) cards, you need to say Y here; you can fetch
- the tools from
- <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
-
- Some user-level drivers for scarab devices which don't require
- special kernel support are available from
- <ftp://shadow.cabi.net/pub/Linux/>.
+ Say Y if you have any pre-802.11 wireless LAN hardware.
-# Note : the cards are obsolete (can't buy them anymore), but the drivers
-# are not, as people are still using them...
-comment "Obsolete Wireless cards support (pre-802.11)"
- depends on NET_RADIO && (INET || ISA || PCMCIA)
+ This option does not affect the kernel build, it only
+ lets you choose drivers.
config STRIP
tristate "STRIP (Metricom starmode radio IP)"
- depends on NET_RADIO && INET
+ depends on INET && WLAN_PRE80211
+ select WIRELESS_EXT
---help---
Say Y if you have a Metricom radio and intend to use Starmode Radio
IP. STRIP is a radio protocol developed for the MosquitoNet project
config ARLAN
tristate "Aironet Arlan 655 & IC2200 DS support"
- depends on NET_RADIO && ISA && !64BIT
+ depends on ISA && !64BIT && WLAN_PRE80211
+ select WIRELESS_EXT
---help---
Aironet makes Arlan, a class of wireless LAN adapters. These use the
www.Telxon.com chip, which is also used on several similar cards.
config WAVELAN
tristate "AT&T/Lucent old WaveLAN & DEC RoamAbout DS ISA support"
- depends on NET_RADIO && ISA
+ depends on ISA && WLAN_PRE80211
+ select WIRELESS_EXT
---help---
The Lucent WaveLAN (formerly NCR and AT&T; or DEC RoamAbout DS) is
a Radio LAN (wireless Ethernet-like Local Area Network) using the
radio frequencies 900 MHz and 2.4 GHz.
- This driver support the ISA version of the WaveLAN card. A separate
- driver for the PCMCIA (PC-card) hardware is available in David
- Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
- for location).
-
If you want to use an ISA WaveLAN card under Linux, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>. Some more specific
information is contained in
<file:Documentation/networking/wavelan.txt> and in the source code
- <file:drivers/net/wavelan.p.h>.
+ <file:drivers/net/wireless/wavelan.p.h>.
You will also need the wireless tools package available from
<http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
config PCMCIA_WAVELAN
tristate "AT&T/Lucent old WaveLAN Pcmcia wireless support"
- depends on NET_RADIO && PCMCIA
+ depends on PCMCIA && WLAN_PRE80211
+ select WIRELESS_EXT
help
Say Y here if you intend to attach an AT&T/Lucent Wavelan PCMCIA
(PC-card) wireless Ethernet networking card to your computer. This
config PCMCIA_NETWAVE
tristate "Xircom Netwave AirSurfer Pcmcia wireless support"
- depends on NET_RADIO && PCMCIA
+ depends on PCMCIA && WLAN_PRE80211
+ select WIRELESS_EXT
help
Say Y here if you intend to attach this type of PCMCIA (PC-card)
wireless Ethernet networking card to your computer.
To compile this driver as a module, choose M here: the module will be
called netwave_cs. If unsure, say N.
-comment "Wireless 802.11 Frequency Hopping cards support"
- depends on NET_RADIO && PCMCIA
+
+config WLAN_80211
+ bool "Wireless LAN (IEEE 802.11)"
+ depends on NETDEVICES
+ ---help---
+ Say Y if you have any 802.11 wireless LAN hardware.
+
+ This option does not affect the kernel build, it only
+ lets you choose drivers.
config PCMCIA_RAYCS
- tristate "Aviator/Raytheon 2.4MHz wireless support"
- depends on NET_RADIO && PCMCIA
+ tristate "Aviator/Raytheon 2.4GHz wireless support"
+ depends on PCMCIA && WLAN_80211
+ select WIRELESS_EXT
---help---
Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
(PC-card) wireless Ethernet networking card to your computer.
To compile this driver as a module, choose M here: the module will be
called ray_cs. If unsure, say N.
-comment "Wireless 802.11b ISA/PCI cards support"
- depends on NET_RADIO && (ISA || PCI || PPC_PMAC || PCMCIA)
-
-config IPW2100
- tristate "Intel PRO/Wireless 2100 Network Connection"
- depends on NET_RADIO && PCI && IEEE80211
+config LIBERTAS
+ tristate "Marvell 8xxx Libertas WLAN driver support"
+ depends on WLAN_80211
+ select WIRELESS_EXT
+ select LIB80211
select FW_LOADER
---help---
- A driver for the Intel PRO/Wireless 2100 Network
- Connection 802.11b wireless network adapter.
-
- See <file:Documentation/networking/README.ipw2100> for information on
- the capabilities currently enabled in this driver and for tips
- for debugging issues and problems.
-
- In order to use this driver, you will need a firmware image for it.
- You can obtain the firmware from
- <http://ipw2100.sf.net/>. Once you have the firmware image, you
- will need to place it in /etc/firmware.
-
- You will also very likely need the Wireless Tools in order to
- configure your card:
-
- <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
-
- If you want to compile the driver as a module ( = code which can be
- inserted in and remvoed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. The module
- will be called ipw2100.ko.
-
-config IPW2100_PROMISC
- bool "Enable promiscuous mode"
- depends on IPW2100
- ---help---
- Enables promiscuous/monitor mode support for the ipw2100 driver.
- With this feature compiled into the driver, you can switch to
- promiscuous mode via the Wireless Tool's Monitor mode. While in this
- mode, no packets can be sent.
-
-config IPW_DEBUG
- bool "Enable full debugging output in IPW2100 module."
- depends on IPW2100
- ---help---
- This option will enable debug tracing output for the IPW2100.
-
- This will result in the kernel module being ~60k larger. You can
- control which debug output is sent to the kernel log by setting the
- value in
-
- /sys/bus/pci/drivers/ipw2100/debug_level
+ A library for Marvell Libertas 8xxx devices.
- This entry will only exist if this option is enabled.
-
- If you are not trying to debug or develop the IPW2100 driver, you
- most likely want to say N here.
+config LIBERTAS_USB
+ tristate "Marvell Libertas 8388 USB 802.11b/g cards"
+ depends on LIBERTAS && USB
+ ---help---
+ A driver for Marvell Libertas 8388 USB devices.
-config IPW2200
- tristate "Intel PRO/Wireless 2200BG and 2915ABG Network Connection"
- depends on IEEE80211 && PCI
+config LIBERTAS_CS
+ tristate "Marvell Libertas 8385 CompactFlash 802.11b/g cards"
+ depends on LIBERTAS && PCMCIA
select FW_LOADER
---help---
- A driver for the Intel PRO/Wireless 2200BG and 2915ABG Network
- Connection adapters.
-
- See <file:Documentation/networking/README.ipw2200> for
- information on the capabilities currently enabled in this
- driver and for tips for debugging issues and problems.
-
- In order to use this driver, you will need a firmware image for it.
- You can obtain the firmware from
- <http://ipw2200.sf.net/>. See the above referenced README.ipw2200
- for information on where to install the firmare images.
-
- You will also very likely need the Wireless Tools in order to
- configure your card:
-
- <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
-
- If you want to compile the driver as a module ( = code which can be
- inserted in and remvoed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. The module
- will be called ipw2200.ko.
-
-config IPW_DEBUG
- bool "Enable full debugging output in IPW2200 module."
- depends on IPW2200
- ---help---
- This option will enable debug tracing output for the IPW2200.
-
- This will result in the kernel module being ~100k larger. You can
- control which debug output is sent to the kernel log by setting the
- value in
-
- /sys/bus/pci/drivers/ipw2200/debug_level
-
- This entry will only exist if this option is enabled.
+ A driver for Marvell Libertas 8385 CompactFlash devices.
- To set a value, simply echo an 8-byte hex value to the same file:
+config LIBERTAS_SDIO
+ tristate "Marvell Libertas 8385 and 8686 SDIO 802.11b/g cards"
+ depends on LIBERTAS && MMC
+ ---help---
+ A driver for Marvell Libertas 8385 and 8686 SDIO devices.
- % echo 0x00000FFO > /sys/bus/pci/drivers/ipw2200/debug_level
+config LIBERTAS_DEBUG
+ bool "Enable full debugging output in the Libertas module."
+ depends on LIBERTAS
+ ---help---
+ Debugging support.
- You can find the list of debug mask values in
- drivers/net/wireless/ipw2200.h
+config LIBERTAS_THINFIRM
+ tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware"
+ depends on WLAN_80211 && MAC80211
+ select FW_LOADER
+ ---help---
+ A library for Marvell Libertas 8xxx devices using thinfirm.
- If you are not trying to debug or develop the IPW2200 driver, you
- most likely want to say N here.
+config LIBERTAS_THINFIRM_USB
+ tristate "Marvell Libertas 8388 USB 802.11b/g cards with thin firmware"
+ depends on LIBERTAS_THINFIRM && USB
+ ---help---
+ A driver for Marvell Libertas 8388 USB devices using thinfirm.
config AIRO
tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
- depends on NET_RADIO && ISA && (PCI || BROKEN)
+ depends on ISA_DMA_API && WLAN_80211 && (PCI || BROKEN)
+ select WIRELESS_EXT
+ select CRYPTO
---help---
This is the standard Linux driver to support Cisco/Aironet ISA and
PCI 802.11 wireless cards.
It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
- with or without encryption) as well as card before the Cisco
- aquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
+ acquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
This driver support both the standard Linux Wireless Extensions
and Cisco proprietary API, so both the Linux Wireless Tools and the
config HERMES
tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)"
- depends on NET_RADIO && (PPC_PMAC || PCI || PCMCIA)
+ depends on (PPC_PMAC || PCI || PCMCIA) && WLAN_80211
+ select WIRELESS_EXT
+ select FW_LOADER
+ select CRYPTO
+ select CRYPTO_MICHAEL_MIC
---help---
- A driver for 802.11b wireless cards based based on the "Hermes" or
+ A driver for 802.11b wireless cards based on the "Hermes" or
Intersil HFA384x (Prism 2) MAC controller. This includes the vast
majority of the PCMCIA 802.11b cards (which are nearly all rebadges)
- except for the Cisco/Aironet cards. Cards supported include the
Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya,
IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear
MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel
- PRO/Wireless, and Symbol Spectrum24 High Rate amongst others.
+ IPW2011, and Symbol Spectrum24 High Rate amongst others.
This option includes the guts of the driver, but in order to
actually use a card you will also need to enable support for PCMCIA
configure your card and that /etc/pcmcia/wireless.opts works :
<http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>
+config HERMES_CACHE_FW_ON_INIT
+ bool "Cache Hermes firmware on driver initialisation"
+ depends on HERMES
+ default y
+ ---help---
+ Say Y to cache any firmware required by the Hermes drivers
+ on startup. The firmware will remain cached until the
+ driver is unloaded. The cache uses 64K of RAM.
+
+ Otherwise load the firmware from userspace as required. In
+ this case the driver should be unloaded and restarted
+ whenever the firmware is changed.
+
+ If you are not sure, say Y.
+
config APPLE_AIRPORT
tristate "Apple Airport support (built-in)"
depends on PPC_PMAC && HERMES
Say Y here to support the Airport 802.11b wireless Ethernet hardware
built into the Macintosh iBook and other recent PowerPC-based
Macintosh machines. This is essentially a Lucent Orinoco card with
- a non-standard interface
+ a non-standard interface.
+
+ This driver does not support the Airport Extreme (802.11b/g). Use
+ the BCM43xx driver for Airport Extreme cards.
config PLX_HERMES
- tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.) (EXPERIMENTAL)"
- depends on PCI && HERMES && EXPERIMENTAL
+ tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.)"
+ depends on PCI && HERMES
help
Enable support for PCMCIA cards supported by the "Hermes" (aka
orinoco) driver when used in PLX9052 based PCI adaptors. These
802.11b PCMCIA cards can be used in desktop machines. The Netgear
MA301 is such an adaptor.
- Support for these adaptors is so far still incomplete and buggy.
- You have been warned.
-
config TMD_HERMES
- tristate "Hermes in TMD7160 based PCI adaptor support (EXPERIMENTAL)"
- depends on PCI && HERMES && EXPERIMENTAL
+ tristate "Hermes in TMD7160 based PCI adaptor support"
+ depends on PCI && HERMES
help
Enable support for PCMCIA cards supported by the "Hermes" (aka
orinoco) driver when used in TMD7160 based PCI adaptors. These
PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that
802.11b PCMCIA cards can be used in desktop machines.
- Support for these adaptors is so far still incomplete and buggy.
- You have been warned.
+config NORTEL_HERMES
+ tristate "Nortel emobility PCI adaptor support"
+ depends on PCI && HERMES
+ help
+ Enable support for PCMCIA cards supported by the "Hermes" (aka
+ orinoco) driver when used in Nortel emobility PCI adaptors. These
+ adaptors are not full PCMCIA controllers, but act as a more limited
+ PCI <-> PCMCIA bridge.
config PCI_HERMES
- tristate "Prism 2.5 PCI 802.11b adaptor support (EXPERIMENTAL)"
- depends on PCI && HERMES && EXPERIMENTAL
+ tristate "Prism 2.5 PCI 802.11b adaptor support"
+ depends on PCI && HERMES
help
Enable support for PCI and mini-PCI 802.11b wireless NICs based on
the Prism 2.5 chipset. These are true PCI cards, not the 802.11b
common. Some of the built-in wireless adaptors in laptops are of
this variety.
+config PCMCIA_HERMES
+ tristate "Hermes PCMCIA card support"
+ depends on PCMCIA && HERMES
+ ---help---
+ A driver for "Hermes" chipset based PCMCIA wireless adaptors, such
+ as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/
+ EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and
+ others). It should also be usable on various Prism II based cards
+ such as the Linksys, D-Link and Farallon Skyline. It should also
+ work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN.
+
+ You will very likely need the Wireless Tools in order to
+ configure your card and that /etc/pcmcia/wireless.opts works:
+ <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
+
+config PCMCIA_SPECTRUM
+ tristate "Symbol Spectrum24 Trilogy PCMCIA card support"
+ depends on PCMCIA && HERMES
+ ---help---
+
+ This is a driver for 802.11b cards using RAM-loadable Symbol
+ firmware, such as Symbol Wireless Networker LA4100, CompactFlash
+ cards by Socket Communications and Intel PRO/Wireless 2011B.
+
+ This driver requires firmware download on startup. Utilities
+ for downloading Symbol firmware are available at
+ <http://sourceforge.net/projects/orinoco/>
+
config ATMEL
tristate "Atmel at76c50x chipset 802.11b support"
- depends on NET_RADIO && EXPERIMENTAL
+ depends on (PCI || PCMCIA) && WLAN_80211
+ select WIRELESS_EXT
select FW_LOADER
select CRC32
---help---
A driver 802.11b wireless cards based on the Atmel fast-vnet
- chips. This driver supports standard Linux wireless extensions.
-
+ chips. This driver supports standard Linux wireless extensions.
+
Many cards based on this chipset do not have flash memory
- and need their firmware loaded at start-up. If yours is
+ and need their firmware loaded at start-up. If yours is
one of these, you will need to provide a firmware image
to be loaded into the card by the driver. The Atmel
firmware package can be downloaded from
Enable support for PCI and mini-PCI cards containing the
Atmel at76c506 chip.
-# If Pcmcia is compiled in, offer Pcmcia cards...
-comment "Wireless 802.11b Pcmcia/Cardbus cards support"
- depends on NET_RADIO && PCMCIA
-
-config PCMCIA_HERMES
- tristate "Hermes PCMCIA card support"
- depends on NET_RADIO && PCMCIA && HERMES
+config PCMCIA_ATMEL
+ tristate "Atmel at76c502/at76c504 PCMCIA cards"
+ depends on ATMEL && PCMCIA
+ select WIRELESS_EXT
+ select FW_LOADER
+ select CRC32
---help---
- A driver for "Hermes" chipset based PCMCIA wireless adaptors, such
- as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/
- EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and
- others). It should also be usable on various Prism II based cards
- such as the Linksys, D-Link and Farallon Skyline. It should also
- work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN.
-
- To use your PC-cards, you will need supporting software from David
- Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
- for location). You also want to check out the PCMCIA-HOWTO,
- available from <http://www.tldp.org/docs.html#howto>.
-
- You will also very likely also need the Wireless Tools in order to
- configure your card and that /etc/pcmcia/wireless.opts works:
- <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
+ Enable support for PCMCIA cards containing the
+ Atmel at76c502 and at76c504 chips.
config AIRO_CS
tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
- depends on NET_RADIO && PCMCIA
+ depends on PCMCIA && (BROKEN || !M32R) && WLAN_80211
+ select WIRELESS_EXT
+ select CRYPTO
+ select CRYPTO_AES
---help---
This is the standard Linux driver to support Cisco/Aironet PCMCIA
802.11 wireless cards. This driver is the same as the Aironet
driver part of the Linux Pcmcia package.
It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
- with or without encryption) as well as card before the Cisco
- aquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
+ acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom
802.11b cards.
and Cisco proprietary API, so both the Linux Wireless Tools and the
Cisco Linux utilities can be used to configure the card.
- To use your PC-cards, you will need supporting software from David
- Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
- for location). You also want to check out the PCMCIA-HOWTO,
- available from <http://www.tldp.org/docs.html#howto>.
-
-config PCMCIA_ATMEL
- tristate "Atmel at76c502/at76c504 PCMCIA cards"
- depends on NET_RADIO && ATMEL && PCMCIA
- select FW_LOADER
- select CRC32
- ---help---
- Enable support for PCMCIA cards containing the
- Atmel at76c502 and at76c504 chips.
-
config PCMCIA_WL3501
tristate "Planet WL3501 PCMCIA cards"
- depends on NET_RADIO && EXPERIMENTAL && PCMCIA
+ depends on EXPERIMENTAL && PCMCIA && WLAN_80211
+ select WIRELESS_EXT
---help---
A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet.
It has basic support for Linux wireless extensions and initial
micro support for ethtool.
-comment "Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support"
- depends on NET_RADIO && PCI
config PRISM54
tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus'
- depends on PCI && NET_RADIO && EXPERIMENTAL
+ depends on PCI && EXPERIMENTAL && WLAN_80211
+ select WIRELESS_EXT
select FW_LOADER
---help---
Enable PCI and Cardbus support for the following chipset based cards:
If you want to compile the driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. The module
- will be called prism54.ko.
+ say M here and read <file:Documentation/kbuild/modules.txt>.
+ The module will be called prism54.ko.
-source "drivers/net/wireless/hostap/Kconfig"
+config USB_ZD1201
+ tristate "USB ZD1201 based Wireless device support"
+ depends on USB && WLAN_80211
+ select WIRELESS_EXT
+ select FW_LOADER
+ ---help---
+ Say Y if you want to use wireless LAN adapters based on the ZyDAS
+ ZD1201 chip.
-# yes, this works even when no drivers are selected
-config NET_WIRELESS
- bool
- depends on NET_RADIO && (ISA || PCI || PPC_PMAC || PCMCIA)
- default y
+ This driver makes the adapter appear as a normal Ethernet interface,
+ typically on wlan0.
-endmenu
+ The zd1201 device requires external firmware to be loaded.
+ This can be found at http://linux-lc100020.sourceforge.net/
+
+ To compile this driver as a module, choose M here: the
+ module will be called zd1201.
+config USB_NET_RNDIS_WLAN
+ tristate "Wireless RNDIS USB support"
+ depends on USB && WLAN_80211 && EXPERIMENTAL
+ select USB_USBNET
+ select USB_NET_CDCETHER
+ select USB_NET_RNDIS_HOST
+ select WIRELESS_EXT
+ ---help---
+ This is a driver for wireless RNDIS devices.
+ These are USB based adapters found in devices such as:
+
+ Buffalo WLI-U2-KG125S
+ U.S. Robotics USR5421
+ Belkin F5D7051
+ Linksys WUSB54GSv2
+ Linksys WUSB54GSC
+ Asus WL169gE
+ Eminent EM4045
+ BT Voyager 1055
+ Linksys WUSB54GSv1
+ U.S. Robotics USR5420
+ BUFFALO WLI-USB-G54
+
+ All of these devices are based on Broadcom 4320 chip which is the
+ only wireless RNDIS chip known to date.
+
+ If you choose to build a module, it'll be called rndis_wlan.
+
+config RTL8180
+ tristate "Realtek 8180/8185 PCI support"
+ depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
+ select EEPROM_93CX6
+ ---help---
+ This is a driver for RTL8180 and RTL8185 based cards.
+ These are PCI based chips found in cards such as:
+
+ (RTL8185 802.11g)
+ A-Link WL54PC
+
+ (RTL8180 802.11b)
+ Belkin F5D6020 v3
+ Belkin F5D6020 v3
+ Dlink DWL-610
+ Dlink DWL-510
+ Netgear MA521
+ Level-One WPC-0101
+ Acer Aspire 1357 LMi
+ VCTnet PC-11B1
+ Ovislink AirLive WL-1120PCM
+ Mentor WL-PCI
+ Linksys WPC11 v4
+ TrendNET TEW-288PI
+ D-Link DWL-520 Rev D
+ Repotec RP-WP7126
+ TP-Link TL-WN250/251
+ Zonet ZEW1000
+ Longshine LCS-8031-R
+ HomeLine HLW-PCC200
+ GigaFast WF721-AEX
+ Planet WL-3553
+ Encore ENLWI-PCI1-NT
+ TrendNET TEW-266PC
+ Gigabyte GN-WLMR101
+ Siemens-fujitsu Amilo D1840W
+ Edimax EW-7126
+ PheeNet WL-11PCIR
+ Tonze PC-2100T
+ Planet WL-8303
+ Dlink DWL-650 v M1
+ Edimax EW-7106
+ Q-Tec 770WC
+ Topcom Skyr@cer 4011b
+ Roper FreeLan 802.11b (edition 2004)
+ Wistron Neweb Corp CB-200B
+ Pentagram HorNET
+ QTec 775WC
+ TwinMOS Booming B Series
+ Micronet SP906BB
+ Sweex LC700010
+ Surecom EP-9428
+ Safecom SWLCR-1100
+
+ Thanks to Realtek for their support!
+
+config RTL8187
+ tristate "Realtek 8187 and 8187B USB support"
+ depends on MAC80211 && USB && WLAN_80211
+ select EEPROM_93CX6
+ ---help---
+ This is a driver for RTL8187 and RTL8187B based cards.
+ These are USB based chips found in devices such as:
+
+ Netgear WG111v2
+ Level 1 WNC-0301USB
+ Micronet SP907GK V5
+ Encore ENUWI-G2
+ Trendnet TEW-424UB
+ ASUS P5B Deluxe
+ Toshiba Satellite Pro series of laptops
+ Asus Wireless Link
+
+ Thanks to Realtek for their support!
+
+config ADM8211
+ tristate "ADMtek ADM8211 support"
+ depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
+ select CRC32
+ select EEPROM_93CX6
+ ---help---
+ This driver is for ADM8211A, ADM8211B, and ADM8211C based cards.
+ These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as:
+
+ Xterasys Cardbus XN-2411b
+ Blitz NetWave Point PC
+ TrendNet 221pc
+ Belkin F5D6001
+ SMC 2635W
+ Linksys WPC11 v1
+ Fiberline FL-WL-200X
+ 3com Office Connect (3CRSHPW796)
+ Corega WLPCIB-11
+ SMC 2602W V2 EU
+ D-Link DWL-520 Revision C
+
+ However, some of these cards have been replaced with other chips
+ like the RTL8180L (Xterasys Cardbus XN-2411b, Belkin F5D6001) or
+ the Ralink RT2400 (SMC2635W) without a model number change.
+
+ Thanks to Infineon-ADMtek for their support of this driver.
+
+config MAC80211_HWSIM
+ tristate "Simulated radio testing tool for mac80211"
+ depends on MAC80211 && WLAN_80211
+ ---help---
+ This driver is a developer testing tool that can be used to test
+ IEEE 802.11 networking stack (mac80211) functionality. This is not
+ needed for normal wireless LAN usage and is only for testing. See
+ Documentation/networking/mac80211_hwsim for more information on how
+ to use this tool.
+
+ To compile this driver as a module, choose M here: the module will be
+ called mac80211_hwsim. If unsure, say N.
+
+source "drivers/net/wireless/p54/Kconfig"
+source "drivers/net/wireless/ath5k/Kconfig"
+source "drivers/net/wireless/ath9k/Kconfig"
+source "drivers/net/wireless/ipw2x00/Kconfig"
+source "drivers/net/wireless/iwlwifi/Kconfig"
+source "drivers/net/wireless/hostap/Kconfig"
+source "drivers/net/wireless/b43/Kconfig"
+source "drivers/net/wireless/b43legacy/Kconfig"
+source "drivers/net/wireless/zd1211rw/Kconfig"
+source "drivers/net/wireless/rt2x00/Kconfig"
+
+endmenu
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff