# Wireless LAN device configuration
#
-menu "Wireless LAN (non-hamradio)"
- depends on NETDEVICES
+menu "Wireless LAN"
+ depends on !S390
-config NET_RADIO
- bool "Wireless LAN drivers (non-hamradio) & Wireless Extensions"
- select WIRELESS_EXT
- ---help---
- Support for wireless LANs and everything having to do with radio,
- but not with amateur radio or FM broadcasting.
-
- Saying Y here also enables the Wireless Extensions (creates
- /proc/net/wireless and enables iwconfig access). The Wireless
- Extension is a generic API allowing a driver to expose to the user
- space configuration and statistics specific to common Wireless LANs.
- The beauty of it is that a single set of tool can support all the
- variations of Wireless LANs, regardless of their type (as long as
- the driver supports Wireless Extension). Another advantage is that
- these parameters may be changed on the fly without restarting the
- driver (or Linux). If you wish to use Wireless Extensions with
- wireless PCMCIA (PC-) cards, you need to say Y here; you can fetch
- the tools from
- <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
-
-config NET_WIRELESS_RTNETLINK
- bool "Wireless Extension API over RtNetlink"
- depends on NET_RADIO
+config WLAN_PRE80211
+ bool "Wireless LAN (pre-802.11)"
+ depends on NETDEVICES
---help---
- Support the Wireless Extension API over the RtNetlink socket
- in addition to the traditional ioctl interface (selected above).
-
- For now, few tools use this facility, but it might grow in the
- future. The only downside is that it adds 4.5 kB to your kernel.
+ Say Y if you have any pre-802.11 wireless LAN hardware.
-# Note : the cards are obsolete (can't buy them anymore), but the drivers
-# are not, as people are still using them...
-comment "Obsolete Wireless cards support (pre-802.11)"
- depends on NET_RADIO && (INET || ISA || PCMCIA)
+ This option does not affect the kernel build, it only
+ lets you choose drivers.
config STRIP
tristate "STRIP (Metricom starmode radio IP)"
- depends on NET_RADIO && INET
+ depends on INET && WLAN_PRE80211
+ select WIRELESS_EXT
---help---
Say Y if you have a Metricom radio and intend to use Starmode Radio
IP. STRIP is a radio protocol developed for the MosquitoNet project
config ARLAN
tristate "Aironet Arlan 655 & IC2200 DS support"
- depends on NET_RADIO && ISA && !64BIT
+ depends on ISA && !64BIT && WLAN_PRE80211
+ select WIRELESS_EXT
---help---
Aironet makes Arlan, a class of wireless LAN adapters. These use the
www.Telxon.com chip, which is also used on several similar cards.
config WAVELAN
tristate "AT&T/Lucent old WaveLAN & DEC RoamAbout DS ISA support"
- depends on NET_RADIO && ISA
+ depends on ISA && WLAN_PRE80211
+ select WIRELESS_EXT
---help---
The Lucent WaveLAN (formerly NCR and AT&T; or DEC RoamAbout DS) is
a Radio LAN (wireless Ethernet-like Local Area Network) using the
radio frequencies 900 MHz and 2.4 GHz.
- This driver support the ISA version of the WaveLAN card. A separate
- driver for the PCMCIA (PC-card) hardware is available in David
- Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
- for location).
-
If you want to use an ISA WaveLAN card under Linux, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>. Some more specific
config PCMCIA_WAVELAN
tristate "AT&T/Lucent old WaveLAN Pcmcia wireless support"
- depends on NET_RADIO && PCMCIA
+ depends on PCMCIA && WLAN_PRE80211
+ select WIRELESS_EXT
help
Say Y here if you intend to attach an AT&T/Lucent Wavelan PCMCIA
(PC-card) wireless Ethernet networking card to your computer. This
config PCMCIA_NETWAVE
tristate "Xircom Netwave AirSurfer Pcmcia wireless support"
- depends on NET_RADIO && PCMCIA
+ depends on PCMCIA && WLAN_PRE80211
+ select WIRELESS_EXT
help
Say Y here if you intend to attach this type of PCMCIA (PC-card)
wireless Ethernet networking card to your computer.
To compile this driver as a module, choose M here: the module will be
called netwave_cs. If unsure, say N.
-comment "Wireless 802.11 Frequency Hopping cards support"
- depends on NET_RADIO && PCMCIA
+
+config WLAN_80211
+ bool "Wireless LAN (IEEE 802.11)"
+ depends on NETDEVICES
+ ---help---
+ Say Y if you have any 802.11 wireless LAN hardware.
+
+ This option does not affect the kernel build, it only
+ lets you choose drivers.
config PCMCIA_RAYCS
tristate "Aviator/Raytheon 2.4MHz wireless support"
- depends on NET_RADIO && PCMCIA
+ depends on PCMCIA && WLAN_80211
+ select WIRELESS_EXT
---help---
Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
(PC-card) wireless Ethernet networking card to your computer.
To compile this driver as a module, choose M here: the module will be
called ray_cs. If unsure, say N.
-comment "Wireless 802.11b ISA/PCI cards support"
- depends on NET_RADIO && (ISA || PCI || PPC_PMAC || PCMCIA)
-
config IPW2100
tristate "Intel PRO/Wireless 2100 Network Connection"
- depends on NET_RADIO && PCI
+ depends on PCI && WLAN_80211
+ select WIRELESS_EXT
select FW_LOADER
select IEEE80211
---help---
If you want to compile the driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. The module
- will be called ipw2100.ko.
+ say M here and read <file:Documentation/kbuild/modules.txt>.
+ The module will be called ipw2100.ko.
config IPW2100_MONITOR
bool "Enable promiscuous mode"
config IPW2200
tristate "Intel PRO/Wireless 2200BG and 2915ABG Network Connection"
- depends on NET_RADIO && PCI
+ depends on PCI && WLAN_80211
+ select WIRELESS_EXT
select FW_LOADER
select IEEE80211
---help---
If you want to compile the driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. The module
- will be called ipw2200.ko.
+ say M here and read <file:Documentation/kbuild/modules.txt>.
+ The module will be called ipw2200.ko.
config IPW2200_MONITOR
bool "Enable promiscuous mode"
If you are not sure, say N here.
+config LIBERTAS
+ tristate "Marvell 8xxx Libertas WLAN driver support"
+ depends on WLAN_80211
+ select IEEE80211
+ select FW_LOADER
+ ---help---
+ A library for Marvell Libertas 8xxx devices.
+
+config LIBERTAS_USB
+ tristate "Marvell Libertas 8388 USB 802.11b/g cards"
+ depends on LIBERTAS && USB
+ ---help---
+ A driver for Marvell Libertas 8388 USB devices.
+
+config LIBERTAS_CS
+ tristate "Marvell Libertas 8385 CompactFlash 802.11b/g cards"
+ depends on LIBERTAS && PCMCIA && EXPERIMENTAL
+ select FW_LOADER
+ ---help---
+ A driver for Marvell Libertas 8385 CompactFlash devices.
+
+config LIBERTAS_DEBUG
+ bool "Enable full debugging output in the Libertas module."
+ depends on LIBERTAS
+ ---help---
+ Debugging support.
+
config AIRO
tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
- depends on NET_RADIO && ISA_DMA_API && (PCI || BROKEN)
+ depends on ISA_DMA_API && WLAN_80211 && (PCI || BROKEN)
+ select WIRELESS_EXT
select CRYPTO
---help---
This is the standard Linux driver to support Cisco/Aironet ISA and
config HERMES
tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)"
- depends on NET_RADIO && (PPC_PMAC || PCI || PCMCIA)
+ depends on (PPC_PMAC || PCI || PCMCIA) && WLAN_80211
+ select WIRELESS_EXT
---help---
A driver for 802.11b wireless cards based on the "Hermes" or
Intersil HFA384x (Prism 2) MAC controller. This includes the vast
common. Some of the built-in wireless adaptors in laptops are of
this variety.
-config ATMEL
- tristate "Atmel at76c50x chipset 802.11b support"
- depends on NET_RADIO && (PCI || PCMCIA)
- select FW_LOADER
- select CRC32
- ---help---
- A driver 802.11b wireless cards based on the Atmel fast-vnet
- chips. This driver supports standard Linux wireless extensions.
-
- Many cards based on this chipset do not have flash memory
- and need their firmware loaded at start-up. If yours is
- one of these, you will need to provide a firmware image
- to be loaded into the card by the driver. The Atmel
- firmware package can be downloaded from
- <http://www.thekelleys.org.uk/atmel>
-
-config PCI_ATMEL
- tristate "Atmel at76c506 PCI cards"
- depends on ATMEL && PCI
- ---help---
- Enable support for PCI and mini-PCI cards containing the
- Atmel at76c506 chip.
-
-# If Pcmcia is compiled in, offer Pcmcia cards...
-comment "Wireless 802.11b Pcmcia/Cardbus cards support"
- depends on NET_RADIO && PCMCIA
-
config PCMCIA_HERMES
tristate "Hermes PCMCIA card support"
- depends on NET_RADIO && PCMCIA && HERMES
+ depends on PCMCIA && HERMES
---help---
A driver for "Hermes" chipset based PCMCIA wireless adaptors, such
as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/
such as the Linksys, D-Link and Farallon Skyline. It should also
work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN.
- To use your PC-cards, you will need supporting software from David
- Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
- for location). You also want to check out the PCMCIA-HOWTO,
- available from <http://www.tldp.org/docs.html#howto>.
-
- You will also very likely also need the Wireless Tools in order to
+ You will very likely need the Wireless Tools in order to
configure your card and that /etc/pcmcia/wireless.opts works:
<http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
config PCMCIA_SPECTRUM
tristate "Symbol Spectrum24 Trilogy PCMCIA card support"
- depends on NET_RADIO && PCMCIA && HERMES
+ depends on PCMCIA && HERMES
select FW_LOADER
---help---
for downloading Symbol firmware are available at
<http://sourceforge.net/projects/orinoco/>
+config ATMEL
+ tristate "Atmel at76c50x chipset 802.11b support"
+ depends on (PCI || PCMCIA) && WLAN_80211
+ select WIRELESS_EXT
+ select FW_LOADER
+ select CRC32
+ ---help---
+ A driver 802.11b wireless cards based on the Atmel fast-vnet
+ chips. This driver supports standard Linux wireless extensions.
+
+ Many cards based on this chipset do not have flash memory
+ and need their firmware loaded at start-up. If yours is
+ one of these, you will need to provide a firmware image
+ to be loaded into the card by the driver. The Atmel
+ firmware package can be downloaded from
+ <http://www.thekelleys.org.uk/atmel>
+
+config PCI_ATMEL
+ tristate "Atmel at76c506 PCI cards"
+ depends on ATMEL && PCI
+ ---help---
+ Enable support for PCI and mini-PCI cards containing the
+ Atmel at76c506 chip.
+
+config PCMCIA_ATMEL
+ tristate "Atmel at76c502/at76c504 PCMCIA cards"
+ depends on ATMEL && PCMCIA
+ select WIRELESS_EXT
+ select FW_LOADER
+ select CRC32
+ ---help---
+ Enable support for PCMCIA cards containing the
+ Atmel at76c502 and at76c504 chips.
+
config AIRO_CS
tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
- depends on NET_RADIO && PCMCIA && (BROKEN || !M32R)
+ depends on PCMCIA && (BROKEN || !M32R) && WLAN_80211
+ select WIRELESS_EXT
select CRYPTO
select CRYPTO_AES
---help---
and Cisco proprietary API, so both the Linux Wireless Tools and the
Cisco Linux utilities can be used to configure the card.
- To use your PC-cards, you will need supporting software from David
- Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
- for location). You also want to check out the PCMCIA-HOWTO,
- available from <http://www.tldp.org/docs.html#howto>.
-
-config PCMCIA_ATMEL
- tristate "Atmel at76c502/at76c504 PCMCIA cards"
- depends on NET_RADIO && ATMEL && PCMCIA
- select FW_LOADER
- select CRC32
- ---help---
- Enable support for PCMCIA cards containing the
- Atmel at76c502 and at76c504 chips.
-
config PCMCIA_WL3501
tristate "Planet WL3501 PCMCIA cards"
- depends on NET_RADIO && EXPERIMENTAL && PCMCIA
+ depends on EXPERIMENTAL && PCMCIA && WLAN_80211
+ select WIRELESS_EXT
---help---
A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet.
It has basic support for Linux wireless extensions and initial
micro support for ethtool.
-comment "Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support"
- depends on NET_RADIO && PCI
config PRISM54
tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus'
- depends on PCI && NET_RADIO && EXPERIMENTAL
+ depends on PCI && EXPERIMENTAL && WLAN_80211
+ select WIRELESS_EXT
select FW_LOADER
---help---
Enable PCI and Cardbus support for the following chipset based cards:
If you want to compile the driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. The module
- will be called prism54.ko.
+ say M here and read <file:Documentation/kbuild/modules.txt>.
+ The module will be called prism54.ko.
config USB_ZD1201
tristate "USB ZD1201 based Wireless device support"
- depends on USB && NET_RADIO
+ depends on USB && WLAN_80211
+ select WIRELESS_EXT
select FW_LOADER
---help---
Say Y if you want to use wireless LAN adapters based on the ZyDAS
To compile this driver as a module, choose M here: the
module will be called zd1201.
+config RTL8187
+ tristate "Realtek 8187 USB support"
+ depends on MAC80211 && USB && WLAN_80211 && EXPERIMENTAL
+ select EEPROM_93CX6
+ ---help---
+ This is a driver for RTL8187 based cards.
+ These are USB based chips found in cards such as:
+
+ Netgear WG111v2
+
+ Thanks to Realtek for their support!
+
+config ADM8211
+ tristate "ADMtek ADM8211 support"
+ depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
+ select CRC32
+ select EEPROM_93CX6
+ ---help---
+ This driver is for ADM8211A, ADM8211B, and ADM8211C based cards.
+ These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as:
+
+ Xterasys Cardbus XN-2411b
+ Blitz NetWave Point PC
+ TrendNet 221pc
+ Belkin F5D6001
+ SMC 2635W
+ Linksys WPC11 v1
+ Fiberline FL-WL-200X
+ 3com Office Connect (3CRSHPW796)
+ Corega WLPCIB-11
+ SMC 2602W V2 EU
+ D-Link DWL-520 Revision C
+
+ However, some of these cards have been replaced with other chips
+ like the RTL8180L (Xterasys Cardbus XN-2411b, Belkin F5D6001) or
+ the Ralink RT2400 (SMC2635W) without a model number change.
+
+ Thanks to Infineon-ADMtek for their support of this driver.
+
source "drivers/net/wireless/hostap/Kconfig"
source "drivers/net/wireless/bcm43xx/Kconfig"
+source "drivers/net/wireless/b43/Kconfig"
+source "drivers/net/wireless/b43legacy/Kconfig"
source "drivers/net/wireless/zd1211rw/Kconfig"
-# yes, this works even when no drivers are selected
-config NET_WIRELESS
- bool
- depends on NET_RADIO && (ISA || PCI || PPC_PMAC || PCMCIA)
- default y
-
endmenu
-
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff