a Radio LAN (wireless Ethernet-like Local Area Network) using the
radio frequencies 900 MHz and 2.4 GHz.
- This driver support the ISA version of the WaveLAN card. A separate
- driver for the PCMCIA (PC-card) hardware is available in David
- Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
- for location).
-
If you want to use an ISA WaveLAN card under Linux, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>. Some more specific
information is contained in
<file:Documentation/networking/wavelan.txt> and in the source code
- <file:drivers/net/wavelan.p.h>.
+ <file:drivers/net/wireless/wavelan.p.h>.
You will also need the wireless tools package available from
<http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
To compile this driver as a module, choose M here: the module will be
called ray_cs. If unsure, say N.
-config IPW2100
- tristate "Intel PRO/Wireless 2100 Network Connection"
- depends on PCI && WLAN_80211
- select WIRELESS_EXT
- select FW_LOADER
- select IEEE80211
- ---help---
- A driver for the Intel PRO/Wireless 2100 Network
- Connection 802.11b wireless network adapter.
-
- See <file:Documentation/networking/README.ipw2100> for information on
- the capabilities currently enabled in this driver and for tips
- for debugging issues and problems.
-
- In order to use this driver, you will need a firmware image for it.
- You can obtain the firmware from
- <http://ipw2100.sf.net/>. Once you have the firmware image, you
- will need to place it in /lib/firmware.
-
- You will also very likely need the Wireless Tools in order to
- configure your card:
-
- <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
-
- If you want to compile the driver as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/kbuild/modules.txt>.
- The module will be called ipw2100.ko.
-
-config IPW2100_MONITOR
- bool "Enable promiscuous mode"
- depends on IPW2100
- ---help---
- Enables promiscuous/monitor mode support for the ipw2100 driver.
- With this feature compiled into the driver, you can switch to
- promiscuous mode via the Wireless Tool's Monitor mode. While in this
- mode, no packets can be sent.
-
-config IPW2100_DEBUG
- bool "Enable full debugging output in IPW2100 module."
- depends on IPW2100
- ---help---
- This option will enable debug tracing output for the IPW2100.
-
- This will result in the kernel module being ~60k larger. You can
- control which debug output is sent to the kernel log by setting the
- value in
-
- /sys/bus/pci/drivers/ipw2100/debug_level
-
- This entry will only exist if this option is enabled.
-
- If you are not trying to debug or develop the IPW2100 driver, you
- most likely want to say N here.
-
-config IPW2200
- tristate "Intel PRO/Wireless 2200BG and 2915ABG Network Connection"
- depends on PCI && WLAN_80211
- select WIRELESS_EXT
- select FW_LOADER
- select IEEE80211
- ---help---
- A driver for the Intel PRO/Wireless 2200BG and 2915ABG Network
- Connection adapters.
-
- See <file:Documentation/networking/README.ipw2200> for
- information on the capabilities currently enabled in this
- driver and for tips for debugging issues and problems.
-
- In order to use this driver, you will need a firmware image for it.
- You can obtain the firmware from
- <http://ipw2200.sf.net/>. See the above referenced README.ipw2200
- for information on where to install the firmware images.
-
- You will also very likely need the Wireless Tools in order to
- configure your card:
-
- <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
-
- If you want to compile the driver as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/kbuild/modules.txt>.
- The module will be called ipw2200.ko.
-
-config IPW2200_MONITOR
- bool "Enable promiscuous mode"
- depends on IPW2200
- ---help---
- Enables promiscuous/monitor mode support for the ipw2200 driver.
- With this feature compiled into the driver, you can switch to
- promiscuous mode via the Wireless Tool's Monitor mode. While in this
- mode, no packets can be sent.
-
-config IPW2200_RADIOTAP
- bool "Enable radiotap format 802.11 raw packet support"
- depends on IPW2200_MONITOR
-
-config IPW2200_PROMISCUOUS
- bool "Enable creation of a RF radiotap promiscuous interface"
- depends on IPW2200_MONITOR
- select IPW2200_RADIOTAP
- ---help---
- Enables the creation of a second interface prefixed 'rtap'.
- This second interface will provide every received in radiotap
- format.
-
- This is useful for performing wireless network analysis while
- maintaining an active association.
-
- Example usage:
-
- % modprobe ipw2200 rtap_iface=1
- % ifconfig rtap0 up
- % tethereal -i rtap0
-
- If you do not specify 'rtap_iface=1' as a module parameter then
- the rtap interface will not be created and you will need to turn
- it on via sysfs:
-
- % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface
-
-config IPW2200_QOS
- bool "Enable QoS support"
- depends on IPW2200 && EXPERIMENTAL
-
-config IPW2200_DEBUG
- bool "Enable full debugging output in IPW2200 module."
- depends on IPW2200
- ---help---
- This option will enable low level debug tracing output for IPW2200.
-
- Note, normal debug code is already compiled in. This low level
- debug option enables debug on hot paths (e.g Tx, Rx, ISR) and
- will result in the kernel module being ~70 larger. Most users
- will typically not need this high verbosity debug information.
-
- If you are not sure, say N here.
-
config LIBERTAS
tristate "Marvell 8xxx Libertas WLAN driver support"
depends on WLAN_80211
+ select WIRELESS_EXT
+ select LIB80211
select FW_LOADER
---help---
A library for Marvell Libertas 8xxx devices.
---help---
A driver for Marvell Libertas 8388 USB devices.
+config LIBERTAS_CS
+ tristate "Marvell Libertas 8385 CompactFlash 802.11b/g cards"
+ depends on LIBERTAS && PCMCIA
+ select FW_LOADER
+ ---help---
+ A driver for Marvell Libertas 8385 CompactFlash devices.
+
+config LIBERTAS_SDIO
+ tristate "Marvell Libertas 8385 and 8686 SDIO 802.11b/g cards"
+ depends on LIBERTAS && MMC
+ ---help---
+ A driver for Marvell Libertas 8385 and 8686 SDIO devices.
+
config LIBERTAS_DEBUG
bool "Enable full debugging output in the Libertas module."
depends on LIBERTAS
---help---
Debugging support.
+config LIBERTAS_THINFIRM
+ tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware"
+ depends on WLAN_80211 && MAC80211
+ select FW_LOADER
+ ---help---
+ A library for Marvell Libertas 8xxx devices using thinfirm.
+
+config LIBERTAS_THINFIRM_USB
+ tristate "Marvell Libertas 8388 USB 802.11b/g cards with thin firmware"
+ depends on LIBERTAS_THINFIRM && USB
+ ---help---
+ A driver for Marvell Libertas 8388 USB devices using thinfirm.
+
config AIRO
tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
depends on ISA_DMA_API && WLAN_80211 && (PCI || BROKEN)
tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)"
depends on (PPC_PMAC || PCI || PCMCIA) && WLAN_80211
select WIRELESS_EXT
+ select FW_LOADER
+ select CRYPTO
+ select CRYPTO_MICHAEL_MIC
---help---
A driver for 802.11b wireless cards based on the "Hermes" or
Intersil HFA384x (Prism 2) MAC controller. This includes the vast
Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya,
IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear
MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel
- PRO/Wireless, and Symbol Spectrum24 High Rate amongst others.
+ IPW2011, and Symbol Spectrum24 High Rate amongst others.
This option includes the guts of the driver, but in order to
actually use a card you will also need to enable support for PCMCIA
common. Some of the built-in wireless adaptors in laptops are of
this variety.
-config ATMEL
- tristate "Atmel at76c50x chipset 802.11b support"
- depends on (PCI || PCMCIA) && WLAN_80211
- select WIRELESS_EXT
- select FW_LOADER
- select CRC32
- ---help---
- A driver 802.11b wireless cards based on the Atmel fast-vnet
- chips. This driver supports standard Linux wireless extensions.
-
- Many cards based on this chipset do not have flash memory
- and need their firmware loaded at start-up. If yours is
- one of these, you will need to provide a firmware image
- to be loaded into the card by the driver. The Atmel
- firmware package can be downloaded from
- <http://www.thekelleys.org.uk/atmel>
-
-config PCI_ATMEL
- tristate "Atmel at76c506 PCI cards"
- depends on ATMEL && PCI
- ---help---
- Enable support for PCI and mini-PCI cards containing the
- Atmel at76c506 chip.
-
config PCMCIA_HERMES
tristate "Hermes PCMCIA card support"
depends on PCMCIA && HERMES
such as the Linksys, D-Link and Farallon Skyline. It should also
work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN.
- To use your PC-cards, you will need supporting software from David
- Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
- for location). You also want to check out the PCMCIA-HOWTO,
- available from <http://www.tldp.org/docs.html#howto>.
-
- You will also very likely also need the Wireless Tools in order to
+ You will very likely need the Wireless Tools in order to
configure your card and that /etc/pcmcia/wireless.opts works:
<http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
config PCMCIA_SPECTRUM
tristate "Symbol Spectrum24 Trilogy PCMCIA card support"
depends on PCMCIA && HERMES
- select FW_LOADER
---help---
This is a driver for 802.11b cards using RAM-loadable Symbol
for downloading Symbol firmware are available at
<http://sourceforge.net/projects/orinoco/>
+config ATMEL
+ tristate "Atmel at76c50x chipset 802.11b support"
+ depends on (PCI || PCMCIA) && WLAN_80211
+ select WIRELESS_EXT
+ select FW_LOADER
+ select CRC32
+ ---help---
+ A driver 802.11b wireless cards based on the Atmel fast-vnet
+ chips. This driver supports standard Linux wireless extensions.
+
+ Many cards based on this chipset do not have flash memory
+ and need their firmware loaded at start-up. If yours is
+ one of these, you will need to provide a firmware image
+ to be loaded into the card by the driver. The Atmel
+ firmware package can be downloaded from
+ <http://www.thekelleys.org.uk/atmel>
+
+config PCI_ATMEL
+ tristate "Atmel at76c506 PCI cards"
+ depends on ATMEL && PCI
+ ---help---
+ Enable support for PCI and mini-PCI cards containing the
+ Atmel at76c506 chip.
+
+config PCMCIA_ATMEL
+ tristate "Atmel at76c502/at76c504 PCMCIA cards"
+ depends on ATMEL && PCMCIA
+ select WIRELESS_EXT
+ select FW_LOADER
+ select CRC32
+ ---help---
+ Enable support for PCMCIA cards containing the
+ Atmel at76c502 and at76c504 chips.
+
config AIRO_CS
tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
depends on PCMCIA && (BROKEN || !M32R) && WLAN_80211
and Cisco proprietary API, so both the Linux Wireless Tools and the
Cisco Linux utilities can be used to configure the card.
- To use your PC-cards, you will need supporting software from David
- Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
- for location). You also want to check out the PCMCIA-HOWTO,
- available from <http://www.tldp.org/docs.html#howto>.
-
-config PCMCIA_ATMEL
- tristate "Atmel at76c502/at76c504 PCMCIA cards"
- depends on ATMEL && PCMCIA
- select WIRELESS_EXT
- select FW_LOADER
- select CRC32
- ---help---
- Enable support for PCMCIA cards containing the
- Atmel at76c502 and at76c504 chips.
-
config PCMCIA_WL3501
tristate "Planet WL3501 PCMCIA cards"
depends on EXPERIMENTAL && PCMCIA && WLAN_80211
To compile this driver as a module, choose M here: the
module will be called zd1201.
+config USB_NET_RNDIS_WLAN
+ tristate "Wireless RNDIS USB support"
+ depends on USB && WLAN_80211 && EXPERIMENTAL
+ select USB_USBNET
+ select USB_NET_CDCETHER
+ select USB_NET_RNDIS_HOST
+ select WIRELESS_EXT
+ ---help---
+ This is a driver for wireless RNDIS devices.
+ These are USB based adapters found in devices such as:
+
+ Buffalo WLI-U2-KG125S
+ U.S. Robotics USR5421
+ Belkin F5D7051
+ Linksys WUSB54GSv2
+ Linksys WUSB54GSC
+ Asus WL169gE
+ Eminent EM4045
+ BT Voyager 1055
+ Linksys WUSB54GSv1
+ U.S. Robotics USR5420
+ BUFFALO WLI-USB-G54
+
+ All of these devices are based on Broadcom 4320 chip which is the
+ only wireless RNDIS chip known to date.
+
+ If you choose to build a module, it'll be called rndis_wlan.
+
+config RTL8180
+ tristate "Realtek 8180/8185 PCI support"
+ depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
+ select EEPROM_93CX6
+ ---help---
+ This is a driver for RTL8180 and RTL8185 based cards.
+ These are PCI based chips found in cards such as:
+
+ (RTL8185 802.11g)
+ A-Link WL54PC
+
+ (RTL8180 802.11b)
+ Belkin F5D6020 v3
+ Belkin F5D6020 v3
+ Dlink DWL-610
+ Dlink DWL-510
+ Netgear MA521
+ Level-One WPC-0101
+ Acer Aspire 1357 LMi
+ VCTnet PC-11B1
+ Ovislink AirLive WL-1120PCM
+ Mentor WL-PCI
+ Linksys WPC11 v4
+ TrendNET TEW-288PI
+ D-Link DWL-520 Rev D
+ Repotec RP-WP7126
+ TP-Link TL-WN250/251
+ Zonet ZEW1000
+ Longshine LCS-8031-R
+ HomeLine HLW-PCC200
+ GigaFast WF721-AEX
+ Planet WL-3553
+ Encore ENLWI-PCI1-NT
+ TrendNET TEW-266PC
+ Gigabyte GN-WLMR101
+ Siemens-fujitsu Amilo D1840W
+ Edimax EW-7126
+ PheeNet WL-11PCIR
+ Tonze PC-2100T
+ Planet WL-8303
+ Dlink DWL-650 v M1
+ Edimax EW-7106
+ Q-Tec 770WC
+ Topcom Skyr@cer 4011b
+ Roper FreeLan 802.11b (edition 2004)
+ Wistron Neweb Corp CB-200B
+ Pentagram HorNET
+ QTec 775WC
+ TwinMOS Booming B Series
+ Micronet SP906BB
+ Sweex LC700010
+ Surecom EP-9428
+ Safecom SWLCR-1100
+
+ Thanks to Realtek for their support!
+
+config RTL8187
+ tristate "Realtek 8187 and 8187B USB support"
+ depends on MAC80211 && USB && WLAN_80211 && EXPERIMENTAL
+ select EEPROM_93CX6
+ ---help---
+ This is a driver for RTL8187 and RTL8187B based cards.
+ These are USB based chips found in devices such as:
+
+ Netgear WG111v2
+ Level 1 WNC-0301USB
+ Micronet SP907GK V5
+ Encore ENUWI-G2
+ Trendnet TEW-424UB
+ ASUS P5B Deluxe
+ Toshiba Satellite Pro series of laptops
+ Asus Wireless Link
+
+ Thanks to Realtek for their support!
+
+config ADM8211
+ tristate "ADMtek ADM8211 support"
+ depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
+ select CRC32
+ select EEPROM_93CX6
+ ---help---
+ This driver is for ADM8211A, ADM8211B, and ADM8211C based cards.
+ These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as:
+
+ Xterasys Cardbus XN-2411b
+ Blitz NetWave Point PC
+ TrendNet 221pc
+ Belkin F5D6001
+ SMC 2635W
+ Linksys WPC11 v1
+ Fiberline FL-WL-200X
+ 3com Office Connect (3CRSHPW796)
+ Corega WLPCIB-11
+ SMC 2602W V2 EU
+ D-Link DWL-520 Revision C
+
+ However, some of these cards have been replaced with other chips
+ like the RTL8180L (Xterasys Cardbus XN-2411b, Belkin F5D6001) or
+ the Ralink RT2400 (SMC2635W) without a model number change.
+
+ Thanks to Infineon-ADMtek for their support of this driver.
+
+config MAC80211_HWSIM
+ tristate "Simulated radio testing tool for mac80211"
+ depends on MAC80211 && WLAN_80211
+ ---help---
+ This driver is a developer testing tool that can be used to test
+ IEEE 802.11 networking stack (mac80211) functionality. This is not
+ needed for normal wireless LAN usage and is only for testing. See
+ Documentation/networking/mac80211_hwsim for more information on how
+ to use this tool.
+
+ To compile this driver as a module, choose M here: the module will be
+ called mac80211_hwsim. If unsure, say N.
+
+source "drivers/net/wireless/p54/Kconfig"
+source "drivers/net/wireless/ath5k/Kconfig"
+source "drivers/net/wireless/ath9k/Kconfig"
+source "drivers/net/wireless/ipw2x00/Kconfig"
+source "drivers/net/wireless/iwlwifi/Kconfig"
source "drivers/net/wireless/hostap/Kconfig"
-source "drivers/net/wireless/bcm43xx/Kconfig"
+source "drivers/net/wireless/b43/Kconfig"
+source "drivers/net/wireless/b43legacy/Kconfig"
source "drivers/net/wireless/zd1211rw/Kconfig"
+source "drivers/net/wireless/rt2x00/Kconfig"
endmenu
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff