#include <linux/net.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
#include <linux/skbuff.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
.remove = tsi108_ether_remove,
.driver = {
.name = "tsi-ethernet",
+ .owner = THIS_MODULE,
},
};
return;
udelay(10);
}
- printk(KERN_ERR "%s function time out \n", __FUNCTION__);
+ printk(KERN_ERR "%s function time out \n", __func__);
}
static int mii_speed(struct mii_if_info *mii)
TSI_WRITE(TSI108_MAC_CFG2, mac_cfg2_reg);
TSI_WRITE(TSI108_EC_PORTCTRL, portctrl_reg);
+ }
- if (data->link_up == 0) {
- /* The manual says it can take 3-4 usecs for the speed change
- * to take effect.
- */
- udelay(5);
+ if (data->link_up == 0) {
+ /* The manual says it can take 3-4 usecs for the speed change
+ * to take effect.
+ */
+ udelay(5);
- spin_lock(&data->txlock);
- if (is_valid_ether_addr(dev->dev_addr) && data->txfree)
- netif_wake_queue(dev);
+ spin_lock(&data->txlock);
+ if (is_valid_ether_addr(dev->dev_addr) && data->txfree)
+ netif_wake_queue(dev);
- data->link_up = 1;
- spin_unlock(&data->txlock);
- }
+ data->link_up = 1;
+ spin_unlock(&data->txlock);
}
-
} else {
if (data->link_up == 1) {
netif_stop_queue(dev);
int rx = data->rxhead;
struct sk_buff *skb;
- data->rxskbs[rx] = skb = dev_alloc_skb(TSI108_RXBUF_SIZE + 2);
+ data->rxskbs[rx] = skb = netdev_alloc_skb(dev,
+ TSI108_RXBUF_SIZE + 2);
if (!skb)
break;
return;
udelay(10);
}
- printk(KERN_ERR "%s function time out \n", __FUNCTION__);
+ printk(KERN_ERR "%s function time out \n", __func__);
}
static void tsi108_reset_ether(struct tsi108_prv_data * data)
udelay(10);
}
if (i == 0)
- printk(KERN_ERR "%s function time out \n", __FUNCTION__);
+ printk(KERN_ERR "%s function time out \n", __func__);
if (data->phy_type == TSI108_PHY_BCM54XX) {
tsi108_write_mii(data, 0x09, 0x0300);
* PHY_STAT register before the link up status bit is set.
*/
- data->link_up = 1;
+ data->link_up = 0;
while (!((phyval = tsi108_read_mii(data, MII_BMSR)) &
BMSR_LSTATUS)) {
if (i++ > (MII_READ_DELAY / 10)) {
- data->link_up = 0;
break;
}
spin_unlock_irqrestore(&phy_lock, flags);
data->rxhead = 0;
for (i = 0; i < TSI108_RXRING_LEN; i++) {
- struct sk_buff *skb = dev_alloc_skb(TSI108_RXBUF_SIZE + NET_IP_ALIGN);
+ struct sk_buff *skb;
+ skb = netdev_alloc_skb(dev, TSI108_RXBUF_SIZE + NET_IP_ALIGN);
if (!skb) {
/* Bah. No memory for now, but maybe we'll get
* some more later.
dev_kfree_skb(skb);
}
- synchronize_irq(data->irq_num);
free_irq(data->irq_num, dev);
/* Discard the RX ring. */
TSI_WRITE(TSI108_EC_INTMASK, ~0);
}
+static int tsi108_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct tsi108_prv_data *data = netdev_priv(dev);
+ unsigned long flags;
+ int rc;
+
+ spin_lock_irqsave(&data->txlock, flags);
+ rc = mii_ethtool_gset(&data->mii_if, cmd);
+ spin_unlock_irqrestore(&data->txlock, flags);
+
+ return rc;
+}
+
+static int tsi108_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct tsi108_prv_data *data = netdev_priv(dev);
+ unsigned long flags;
+ int rc;
+
+ spin_lock_irqsave(&data->txlock, flags);
+ rc = mii_ethtool_sset(&data->mii_if, cmd);
+ spin_unlock_irqrestore(&data->txlock, flags);
+
+ return rc;
+}
+
static int tsi108_do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
struct tsi108_prv_data *data = netdev_priv(dev);
+ if (!netif_running(dev))
+ return -EINVAL;
return generic_mii_ioctl(&data->mii_if, if_mii(rq), cmd, NULL);
}
+static const struct ethtool_ops tsi108_ethtool_ops = {
+ .get_link = ethtool_op_get_link,
+ .get_settings = tsi108_get_settings,
+ .set_settings = tsi108_set_settings,
+};
+
static int
tsi108_init_one(struct platform_device *pdev)
{
dev->get_stats = tsi108_get_stats;
netif_napi_add(dev, &data->napi, tsi108_poll, 64);
dev->do_ioctl = tsi108_do_ioctl;
+ dev->ethtool_ops = &tsi108_ethtool_ops;
/* Apparently, the Linux networking code won't use scatter-gather
* if the hardware doesn't do checksums. However, it's faster
MODULE_AUTHOR("Tundra Semiconductor Corporation");
MODULE_DESCRIPTION("Tsi108 Gigabit Ethernet driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:tsi-ethernet");