#include <linux/net.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
#include <linux/skbuff.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/rtnetlink.h>
#include <linux/timer.h>
#include <linux/platform_device.h>
-#include <linux/etherdevice.h>
#include <asm/system.h>
#include <asm/io.h>
void __iomem *regs; /* Base of normal regs */
void __iomem *phyregs; /* Base of register bank used for PHY access */
+ struct net_device *dev;
+ struct napi_struct napi;
+
unsigned int phy; /* Index of PHY for this interface */
unsigned int irq_num;
unsigned int id;
.remove = tsi108_ether_remove,
.driver = {
.name = "tsi-ethernet",
+ .owner = THIS_MODULE,
},
};
return;
udelay(10);
}
- printk(KERN_ERR "%s function time out \n", __FUNCTION__);
+ printk(KERN_ERR "%s function time out \n", __func__);
}
static int mii_speed(struct mii_if_info *mii)
u32 speed;
unsigned long flags;
- /* Do a dummy read, as for some reason the first read
- * after a link becomes up returns link down, even if
- * it's been a while since the link came up.
- */
-
spin_lock_irqsave(&phy_lock, flags);
if (!data->phy_ok)
goto out;
- tsi108_read_mii(data, MII_BMSR);
-
duplex = mii_check_media(&data->mii_if, netif_msg_link(data), data->init_media);
data->init_media = 0;
TSI_WRITE(TSI108_MAC_CFG2, mac_cfg2_reg);
TSI_WRITE(TSI108_EC_PORTCTRL, portctrl_reg);
+ }
- if (data->link_up == 0) {
- /* The manual says it can take 3-4 usecs for the speed change
- * to take effect.
- */
- udelay(5);
+ if (data->link_up == 0) {
+ /* The manual says it can take 3-4 usecs for the speed change
+ * to take effect.
+ */
+ udelay(5);
- spin_lock(&data->txlock);
- if (is_valid_ether_addr(dev->dev_addr) && data->txfree)
- netif_wake_queue(dev);
+ spin_lock(&data->txlock);
+ if (is_valid_ether_addr(dev->dev_addr) && data->txfree)
+ netif_wake_queue(dev);
- data->link_up = 1;
- spin_unlock(&data->txlock);
- }
+ data->link_up = 1;
+ spin_unlock(&data->txlock);
}
-
} else {
if (data->link_up == 1) {
netif_stop_queue(dev);
int rx = data->rxhead;
struct sk_buff *skb;
- data->rxskbs[rx] = skb = dev_alloc_skb(TSI108_RXBUF_SIZE + 2);
+ data->rxskbs[rx] = skb = netdev_alloc_skb(dev,
+ TSI108_RXBUF_SIZE + 2);
if (!skb)
break;
return done;
}
-static int tsi108_poll(struct net_device *dev, int *budget)
+static int tsi108_poll(struct napi_struct *napi, int budget)
{
- struct tsi108_prv_data *data = netdev_priv(dev);
+ struct tsi108_prv_data *data = container_of(napi, struct tsi108_prv_data, napi);
+ struct net_device *dev = data->dev;
u32 estat = TSI_READ(TSI108_EC_RXESTAT);
u32 intstat = TSI_READ(TSI108_EC_INTSTAT);
- int total_budget = min(*budget, dev->quota);
- int num_received = 0, num_filled = 0, budget_used;
+ int num_received = 0, num_filled = 0;
intstat &= TSI108_INT_RXQUEUE0 | TSI108_INT_RXTHRESH |
TSI108_INT_RXOVERRUN | TSI108_INT_RXERROR | TSI108_INT_RXWAIT;
TSI_WRITE(TSI108_EC_INTSTAT, intstat);
if (data->rxpending || (estat & TSI108_EC_RXESTAT_Q0_DESCINT))
- num_received = tsi108_complete_rx(dev, total_budget);
+ num_received = tsi108_complete_rx(dev, budget);
/* This should normally fill no more slots than the number of
* packets received in tsi108_complete_rx(). The exception
*/
if (data->rxfree < TSI108_RXRING_LEN)
- num_filled = tsi108_refill_rx(dev, total_budget * 2);
+ num_filled = tsi108_refill_rx(dev, budget * 2);
if (intstat & TSI108_INT_RXERROR) {
u32 err = TSI_READ(TSI108_EC_RXERR);
spin_unlock_irq(&data->misclock);
}
- budget_used = max(num_received, num_filled / 2);
-
- *budget -= budget_used;
- dev->quota -= budget_used;
-
- if (budget_used != total_budget) {
+ if (num_received < budget) {
data->rxpending = 0;
- netif_rx_complete(dev);
+ netif_rx_complete(dev, napi);
TSI_WRITE(TSI108_EC_INTMASK,
TSI_READ(TSI108_EC_INTMASK)
TSI108_INT_RXOVERRUN |
TSI108_INT_RXERROR |
TSI108_INT_RXWAIT));
-
- /* IRQs are level-triggered, so no need to re-check */
- return 0;
} else {
data->rxpending = 1;
}
- return 1;
+ return num_received;
}
static void tsi108_rx_int(struct net_device *dev)
* from tsi108_check_rxring().
*/
- if (netif_rx_schedule_prep(dev)) {
+ if (netif_rx_schedule_prep(dev, &data->napi)) {
/* Mask, rather than ack, the receive interrupts. The ack
* will happen in tsi108_poll().
*/
| TSI108_INT_RXTHRESH |
TSI108_INT_RXOVERRUN | TSI108_INT_RXERROR |
TSI108_INT_RXWAIT);
- __netif_rx_schedule(dev);
+ __netif_rx_schedule(dev, &data->napi);
} else {
if (!netif_running(dev)) {
/* This can happen if an interrupt occurs while the
return;
udelay(10);
}
- printk(KERN_ERR "%s function time out \n", __FUNCTION__);
+ printk(KERN_ERR "%s function time out \n", __func__);
}
static void tsi108_reset_ether(struct tsi108_prv_data * data)
udelay(10);
}
if (i == 0)
- printk(KERN_ERR "%s function time out \n", __FUNCTION__);
+ printk(KERN_ERR "%s function time out \n", __func__);
if (data->phy_type == TSI108_PHY_BCM54XX) {
tsi108_write_mii(data, 0x09, 0x0300);
* PHY_STAT register before the link up status bit is set.
*/
- data->link_up = 1;
+ data->link_up = 0;
while (!((phyval = tsi108_read_mii(data, MII_BMSR)) &
BMSR_LSTATUS)) {
if (i++ > (MII_READ_DELAY / 10)) {
- data->link_up = 0;
break;
}
spin_unlock_irqrestore(&phy_lock, flags);
spin_lock_irqsave(&phy_lock, flags);
}
+ data->mii_if.supports_gmii = mii_check_gmii_support(&data->mii_if);
printk(KERN_DEBUG "PHY_STAT reg contains %08x\n", phyval);
data->phy_ok = 1;
data->init_media = 1;
data->rxhead = 0;
for (i = 0; i < TSI108_RXRING_LEN; i++) {
- struct sk_buff *skb = dev_alloc_skb(TSI108_RXBUF_SIZE + NET_IP_ALIGN);
+ struct sk_buff *skb;
+ skb = netdev_alloc_skb(dev, TSI108_RXBUF_SIZE + NET_IP_ALIGN);
if (!skb) {
/* Bah. No memory for now, but maybe we'll get
* some more later.
TSI_WRITE(TSI108_EC_TXQ_PTRLOW, data->txdma);
tsi108_init_phy(dev);
+ napi_enable(&data->napi);
+
setup_timer(&data->timer, tsi108_timed_checker, (unsigned long)dev);
mod_timer(&data->timer, jiffies + 1);
struct tsi108_prv_data *data = netdev_priv(dev);
netif_stop_queue(dev);
+ napi_disable(&data->napi);
del_timer_sync(&data->timer);
dev_kfree_skb(skb);
}
- synchronize_irq(data->irq_num);
free_irq(data->irq_num, dev);
/* Discard the RX ring. */
TSI_WRITE(TSI108_EC_INTMASK, ~0);
}
+static int tsi108_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct tsi108_prv_data *data = netdev_priv(dev);
+ unsigned long flags;
+ int rc;
+
+ spin_lock_irqsave(&data->txlock, flags);
+ rc = mii_ethtool_gset(&data->mii_if, cmd);
+ spin_unlock_irqrestore(&data->txlock, flags);
+
+ return rc;
+}
+
+static int tsi108_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct tsi108_prv_data *data = netdev_priv(dev);
+ unsigned long flags;
+ int rc;
+
+ spin_lock_irqsave(&data->txlock, flags);
+ rc = mii_ethtool_sset(&data->mii_if, cmd);
+ spin_unlock_irqrestore(&data->txlock, flags);
+
+ return rc;
+}
+
static int tsi108_do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
struct tsi108_prv_data *data = netdev_priv(dev);
+ if (!netif_running(dev))
+ return -EINVAL;
return generic_mii_ioctl(&data->mii_if, if_mii(rq), cmd, NULL);
}
+static const struct ethtool_ops tsi108_ethtool_ops = {
+ .get_link = ethtool_op_get_link,
+ .get_settings = tsi108_get_settings,
+ .set_settings = tsi108_set_settings,
+};
+
static int
tsi108_init_one(struct platform_device *pdev)
{
printk("tsi108_eth%d: probe...\n", pdev->id);
data = netdev_priv(dev);
+ data->dev = dev;
pr_debug("tsi108_eth%d:regs:phyresgs:phy:irq_num=0x%x:0x%x:0x%x:0x%x\n",
pdev->id, einfo->regs, einfo->phyregs,
data->mii_if.phy_id = einfo->phy;
data->mii_if.phy_id_mask = 0x1f;
data->mii_if.reg_num_mask = 0x1f;
- data->mii_if.supports_gmii = mii_check_gmii_support(&data->mii_if);
data->phy = einfo->phy;
data->phy_type = einfo->phy_type;
dev->set_mac_address = tsi108_set_mac;
dev->set_multicast_list = tsi108_set_rx_mode;
dev->get_stats = tsi108_get_stats;
- dev->poll = tsi108_poll;
+ netif_napi_add(dev, &data->napi, tsi108_poll, 64);
dev->do_ioctl = tsi108_do_ioctl;
- dev->weight = 64; /* 64 is more suitable for GigE interface - klai */
+ dev->ethtool_ops = &tsi108_ethtool_ops;
/* Apparently, the Linux networking code won't use scatter-gather
* if the hardware doesn't do checksums. However, it's faster
*/
dev->features = NETIF_F_HIGHDMA;
- SET_MODULE_OWNER(dev);
spin_lock_init(&data->txlock);
spin_lock_init(&data->misclock);
goto register_fail;
}
- printk(KERN_INFO "%s: Tsi108 Gigabit Ethernet, MAC: "
- "%02x:%02x:%02x:%02x:%02x:%02x\n", dev->name,
- dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
- dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
+ platform_set_drvdata(pdev, dev);
+ printk(KERN_INFO "%s: Tsi108 Gigabit Ethernet, MAC: %pM\n",
+ dev->name, dev->dev_addr);
#ifdef DEBUG
data->msg_enable = DEBUG;
dump_eth_one(dev);
MODULE_AUTHOR("Tundra Semiconductor Corporation");
MODULE_DESCRIPTION("Tsi108 Gigabit Ethernet driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:tsi-ethernet");
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff