USB: rename usb_buffer_alloc() and usb_buffer_free() users
[safe/jmp/linux-2.6] / drivers / net / sundance.c
index 545f81b..8249a39 100644 (file)
@@ -84,7 +84,6 @@ static char *media[MAX_UNITS];
 #include <linux/timer.h>
 #include <linux/errno.h>
 #include <linux/ioport.h>
-#include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/pci.h>
 #include <linux/netdevice.h>
@@ -206,7 +205,7 @@ IVc. Errata
 #define USE_IO_OPS 1
 #endif
 
-static const struct pci_device_id sundance_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(sundance_pci_tbl) = {
        { 0x1186, 0x1002, 0x1186, 0x1002, 0, 0, 0 },
        { 0x1186, 0x1002, 0x1186, 0x1003, 0, 0, 1 },
        { 0x1186, 0x1002, 0x1186, 0x1012, 0, 0, 2 },
@@ -415,7 +414,7 @@ static void check_duplex(struct net_device *dev);
 static void netdev_timer(unsigned long data);
 static void tx_timeout(struct net_device *dev);
 static void init_ring(struct net_device *dev);
-static int  start_tx(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev);
 static int reset_tx (struct net_device *dev);
 static irqreturn_t intr_handler(int irq, void *dev_instance);
 static void rx_poll(unsigned long data);
@@ -603,8 +602,8 @@ static int __devinit sundance_probe1 (struct pci_dev *pdev,
                            strcmp (media[card_idx], "4") == 0) {
                                np->speed = 100;
                                np->mii_if.full_duplex = 1;
-                       } else if (strcmp (media[card_idx], "100mbps_hd") == 0
-                                  || strcmp (media[card_idx], "3") == 0) {
+                       } else if (strcmp (media[card_idx], "100mbps_hd") == 0 ||
+                                  strcmp (media[card_idx], "3") == 0) {
                                np->speed = 100;
                                np->mii_if.full_duplex = 0;
                        } else if (strcmp (media[card_idx], "10mbps_fd") == 0 ||
@@ -819,7 +818,7 @@ static int netdev_open(struct net_device *dev)
 
        /* Do we need to reset the chip??? */
 
-       i = request_irq(dev->irq, &intr_handler, IRQF_SHARED, dev->name, dev);
+       i = request_irq(dev->irq, intr_handler, IRQF_SHARED, dev->name, dev);
        if (i)
                return i;
 
@@ -1053,7 +1052,7 @@ static void tx_poll (unsigned long data)
        return;
 }
 
-static int
+static netdev_tx_t
 start_tx (struct sk_buff *skb, struct net_device *dev)
 {
        struct netdev_private *np = netdev_priv(dev);
@@ -1079,8 +1078,8 @@ start_tx (struct sk_buff *skb, struct net_device *dev)
        tasklet_schedule(&np->tx_tasklet);
 
        /* On some architectures: explicitly flush cache lines here. */
-       if (np->cur_tx - np->dirty_tx < TX_QUEUE_LEN - 1
-                       && !netif_queue_stopped(dev)) {
+       if (np->cur_tx - np->dirty_tx < TX_QUEUE_LEN - 1 &&
+           !netif_queue_stopped(dev)) {
                /* do nothing */
        } else {
                netif_stop_queue (dev);
@@ -1091,7 +1090,7 @@ start_tx (struct sk_buff *skb, struct net_device *dev)
                        "%s: Transmit frame #%d queued in slot %d.\n",
                        dev->name, np->cur_tx, entry);
        }
-       return 0;
+       return NETDEV_TX_OK;
 }
 
 /* Reset hardware tx and free all of tx buffers */
@@ -1336,8 +1335,8 @@ static void rx_poll(unsigned long data)
 #endif
                        /* Check if the packet is long enough to accept without copying
                           to a minimally-sized skbuff. */
-                       if (pkt_len < rx_copybreak
-                               && (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
+                       if (pkt_len < rx_copybreak &&
+                           (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
                                skb_reserve(skb, 2);    /* 16 byte align the IP header */
                                pci_dma_sync_single_for_cpu(np->pci_dev,
                                                            le32_to_cpu(desc->frag[0].addr),
@@ -1517,19 +1516,18 @@ static void set_rx_mode(struct net_device *dev)
        if (dev->flags & IFF_PROMISC) {                 /* Set promiscuous. */
                memset(mc_filter, 0xff, sizeof(mc_filter));
                rx_mode = AcceptBroadcast | AcceptMulticast | AcceptAll | AcceptMyPhys;
-       } else if ((dev->mc_count > multicast_filter_limit)
-                          ||  (dev->flags & IFF_ALLMULTI)) {
+       } else if ((netdev_mc_count(dev) > multicast_filter_limit) ||
+                  (dev->flags & IFF_ALLMULTI)) {
                /* Too many to match, or accept all multicasts. */
                memset(mc_filter, 0xff, sizeof(mc_filter));
                rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
-       } else if (dev->mc_count) {
+       } else if (!netdev_mc_empty(dev)) {
                struct dev_mc_list *mclist;
                int bit;
                int index;
                int crc;
                memset (mc_filter, 0, sizeof (mc_filter));
-               for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
-                    i++, mclist = mclist->next) {
+               netdev_for_each_mc_addr(mclist, dev) {
                        crc = ether_crc_le (ETH_ALEN, mclist->dmi_addr);
                        for (index=0, bit=0; bit < 6; bit++, crc <<= 1)
                                if (crc & 0x80000000) index |= 1 << bit;
@@ -1698,13 +1696,13 @@ static int netdev_close(struct net_device *dev)
 
 #ifdef __i386__
        if (netif_msg_hw(np)) {
-               printk("\n"KERN_DEBUG"  Tx ring at %8.8x:\n",
+               printk(KERN_DEBUG "  Tx ring at %8.8x:\n",
                           (int)(np->tx_ring_dma));
                for (i = 0; i < TX_RING_SIZE; i++)
-                       printk(" #%d desc. %4.4x %8.8x %8.8x.\n",
+                       printk(KERN_DEBUG " #%d desc. %4.4x %8.8x %8.8x.\n",
                                   i, np->tx_ring[i].status, np->tx_ring[i].frag[0].addr,
                                   np->tx_ring[i].frag[0].length);
-               printk("\n"KERN_DEBUG "  Rx ring %8.8x:\n",
+               printk(KERN_DEBUG "  Rx ring %8.8x:\n",
                           (int)(np->rx_ring_dma));
                for (i = 0; i < /*RX_RING_SIZE*/4 ; i++) {
                        printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x\n",