*/
#define DRV_NAME "starfire"
-#define DRV_VERSION "2.0"
-#define DRV_RELDATE "June 27, 2006"
+#define DRV_VERSION "2.1"
+#define DRV_RELDATE "July 6, 2008"
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/mii.h>
#include <linux/if_vlan.h>
#include <linux/mm.h>
+#include <linux/firmware.h>
#include <asm/processor.h> /* Processor type for cache alignment. */
#include <asm/uaccess.h>
#include <asm/io.h>
-#include "starfire_firmware.h"
/*
* The current frame processor firmware fails to checksum a fragment
* of length 1. If and when this is fixed, the #define below can be removed.
#define VLAN_SUPPORT
#endif
-#ifndef CONFIG_ADAPTEC_STARFIRE_NAPI
-#undef HAVE_NETDEV_POLL
-#endif
-
/* The user-configurable values.
These may be modified when a driver module is loaded.*/
#define skb_first_frag_len(skb) skb_headlen(skb)
#define skb_num_frags(skb) (skb_shinfo(skb)->nr_frags + 1)
-#ifdef HAVE_NETDEV_POLL
-#define init_poll(dev, np) \
- netif_napi_add(dev, &np->napi, netdev_poll, max_interrupt_work)
-#define netdev_rx(dev, np, ioaddr) \
-do { \
- u32 intr_enable; \
- if (netif_rx_schedule_prep(dev, &np->napi)) { \
- __netif_rx_schedule(dev, &np->napi); \
- intr_enable = readl(ioaddr + IntrEnable); \
- intr_enable &= ~(IntrRxDone | IntrRxEmpty); \
- writel(intr_enable, ioaddr + IntrEnable); \
- readl(ioaddr + IntrEnable); /* flush PCI posting buffers */ \
- } else { \
- /* Paranoia check */ \
- intr_enable = readl(ioaddr + IntrEnable); \
- if (intr_enable & (IntrRxDone | IntrRxEmpty)) { \
- printk(KERN_INFO "%s: interrupt while in polling mode!\n", dev->name); \
- intr_enable &= ~(IntrRxDone | IntrRxEmpty); \
- writel(intr_enable, ioaddr + IntrEnable); \
- } \
- } \
-} while (0)
-#define netdev_receive_skb(skb) netif_receive_skb(skb)
-#define vlan_netdev_receive_skb(skb, vlgrp, vlid) vlan_hwaccel_receive_skb(skb, vlgrp, vlid)
-static int netdev_poll(struct napi_struct *napi, int budget);
-#else /* not HAVE_NETDEV_POLL */
-#define init_poll(dev, np)
-#define netdev_receive_skb(skb) netif_rx(skb)
-#define vlan_netdev_receive_skb(skb, vlgrp, vlid) vlan_hwaccel_rx(skb, vlgrp, vlid)
-#define netdev_rx(dev, np, ioaddr) \
-do { \
- int quota = np->dirty_rx + RX_RING_SIZE - np->cur_rx; \
- __netdev_rx(dev, "a);\
-} while (0)
-#endif /* not HAVE_NETDEV_POLL */
-/* end of compatibility code */
-
+/* Firmware names */
+#define FIRMWARE_RX "adaptec/starfire_rx.bin"
+#define FIRMWARE_TX "adaptec/starfire_tx.bin"
/* These identify the driver base version and may not be removed. */
-static const char version[] __devinitdata =
+static const char version[] __devinitconst =
KERN_INFO "starfire.c:v1.03 7/26/2000 Written by Donald Becker <becker@scyld.com>\n"
-KERN_INFO " (unofficial 2.2/2.4 kernel port, version " DRV_VERSION ", " DRV_RELDATE ")\n";
+" (unofficial 2.2/2.4 kernel port, version " DRV_VERSION ", " DRV_RELDATE ")\n";
MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
MODULE_DESCRIPTION("Adaptec Starfire Ethernet driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
+MODULE_FIRMWARE(FIRMWARE_RX);
+MODULE_FIRMWARE(FIRMWARE_TX);
module_param(max_interrupt_work, int, 0);
module_param(mtu, int, 0);
CH_6915 = 0,
};
-static struct pci_device_id starfire_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(starfire_pci_tbl) = {
{ 0x9004, 0x6915, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_6915 },
{ 0, }
};
static void check_duplex(struct net_device *dev);
static void tx_timeout(struct net_device *dev);
static void init_ring(struct net_device *dev);
-static int start_tx(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev);
static irqreturn_t intr_handler(int irq, void *dev_instance);
static void netdev_error(struct net_device *dev, int intr_status);
static int __netdev_rx(struct net_device *dev, int *quota);
+static int netdev_poll(struct napi_struct *napi, int budget);
static void refill_rx_ring(struct net_device *dev);
static void netdev_error(struct net_device *dev, int intr_status);
static void set_rx_mode(struct net_device *dev);
#endif /* VLAN_SUPPORT */
+static const struct net_device_ops netdev_ops = {
+ .ndo_open = netdev_open,
+ .ndo_stop = netdev_close,
+ .ndo_start_xmit = start_tx,
+ .ndo_tx_timeout = tx_timeout,
+ .ndo_get_stats = get_stats,
+ .ndo_set_multicast_list = &set_rx_mode,
+ .ndo_do_ioctl = netdev_ioctl,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+#ifdef VLAN_SUPPORT
+ .ndo_vlan_rx_register = netdev_vlan_rx_register,
+ .ndo_vlan_rx_add_vid = netdev_vlan_rx_add_vid,
+ .ndo_vlan_rx_kill_vid = netdev_vlan_rx_kill_vid,
+#endif
+};
+
static int __devinit starfire_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
void __iomem *base;
int drv_flags, io_size;
int boguscnt;
- DECLARE_MAC_BUF(mac);
/* when built into the kernel, we only print version if device is found */
#ifndef MODULE
if (enable_hw_cksum)
dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
#endif /* ZEROCOPY */
+
#ifdef VLAN_SUPPORT
dev->features |= NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER;
- dev->vlan_rx_register = netdev_vlan_rx_register;
- dev->vlan_rx_add_vid = netdev_vlan_rx_add_vid;
- dev->vlan_rx_kill_vid = netdev_vlan_rx_kill_vid;
#endif /* VLAN_RX_KILL_VID */
#ifdef ADDR_64BITS
dev->features |= NETIF_F_HIGHDMA;
}
}
- /* The chip-specific entries in the device structure. */
- dev->open = &netdev_open;
- dev->hard_start_xmit = &start_tx;
- dev->tx_timeout = tx_timeout;
+ dev->netdev_ops = &netdev_ops;
dev->watchdog_timeo = TX_TIMEOUT;
- init_poll(dev, np);
- dev->stop = &netdev_close;
- dev->get_stats = &get_stats;
- dev->set_multicast_list = &set_rx_mode;
- dev->do_ioctl = &netdev_ioctl;
SET_ETHTOOL_OPS(dev, ðtool_ops);
+ netif_napi_add(dev, &np->napi, netdev_poll, max_interrupt_work);
+
if (mtu)
dev->mtu = mtu;
if (register_netdev(dev))
goto err_out_cleardev;
- printk(KERN_INFO "%s: %s at %p, %s, IRQ %d.\n",
+ printk(KERN_INFO "%s: %s at %p, %pM, IRQ %d.\n",
dev->name, netdrv_tbl[chip_idx].name, base,
- print_mac(mac, dev->dev_addr), irq);
+ dev->dev_addr, irq);
if (drv_flags & CanHaveMII) {
int phy, phy_idx = 0;
void __iomem *mdio_addr = np->base + MIICtrl + (phy_id<<7) + (location<<2);
int result, boguscnt=1000;
/* ??? Should we add a busy-wait here? */
- do
+ do {
result = readl(mdio_addr);
- while ((result & 0xC0000000) != 0x80000000 && --boguscnt > 0);
+ } while ((result & 0xC0000000) != 0x80000000 && --boguscnt > 0);
if (boguscnt == 0)
return 0;
if ((result & 0xffff) == 0xffff)
static int netdev_open(struct net_device *dev)
{
+ const struct firmware *fw_rx, *fw_tx;
+ const __be32 *fw_rx_data, *fw_tx_data;
struct netdev_private *np = netdev_priv(dev);
void __iomem *ioaddr = np->base;
int i, retval;
+ size_t tx_size, rx_size;
size_t tx_done_q_size, rx_done_q_size, tx_ring_size, rx_ring_size;
/* Do we ever need to reset the chip??? */
- retval = request_irq(dev->irq, &intr_handler, IRQF_SHARED, dev->name, dev);
+ retval = request_irq(dev->irq, intr_handler, IRQF_SHARED, dev->name, dev);
if (retval)
return retval;
writel(np->intr_timer_ctrl, ioaddr + IntrTimerCtrl);
-#ifdef HAVE_NETDEV_POLL
napi_enable(&np->napi);
-#endif
+
netif_start_queue(dev);
if (debug > 1)
writel(ETH_P_8021Q, ioaddr + VlanType);
#endif /* VLAN_SUPPORT */
+ retval = request_firmware(&fw_rx, FIRMWARE_RX, &np->pci_dev->dev);
+ if (retval) {
+ printk(KERN_ERR "starfire: Failed to load firmware \"%s\"\n",
+ FIRMWARE_RX);
+ goto out_init;
+ }
+ if (fw_rx->size % 4) {
+ printk(KERN_ERR "starfire: bogus length %zu in \"%s\"\n",
+ fw_rx->size, FIRMWARE_RX);
+ retval = -EINVAL;
+ goto out_rx;
+ }
+ retval = request_firmware(&fw_tx, FIRMWARE_TX, &np->pci_dev->dev);
+ if (retval) {
+ printk(KERN_ERR "starfire: Failed to load firmware \"%s\"\n",
+ FIRMWARE_TX);
+ goto out_rx;
+ }
+ if (fw_tx->size % 4) {
+ printk(KERN_ERR "starfire: bogus length %zu in \"%s\"\n",
+ fw_tx->size, FIRMWARE_TX);
+ retval = -EINVAL;
+ goto out_tx;
+ }
+ fw_rx_data = (const __be32 *)&fw_rx->data[0];
+ fw_tx_data = (const __be32 *)&fw_tx->data[0];
+ rx_size = fw_rx->size / 4;
+ tx_size = fw_tx->size / 4;
+
/* Load Rx/Tx firmware into the frame processors */
- for (i = 0; i < FIRMWARE_RX_SIZE * 2; i++)
- writel(firmware_rx[i], ioaddr + RxGfpMem + i * 4);
- for (i = 0; i < FIRMWARE_TX_SIZE * 2; i++)
- writel(firmware_tx[i], ioaddr + TxGfpMem + i * 4);
+ for (i = 0; i < rx_size; i++)
+ writel(be32_to_cpup(&fw_rx_data[i]), ioaddr + RxGfpMem + i * 4);
+ for (i = 0; i < tx_size; i++)
+ writel(be32_to_cpup(&fw_tx_data[i]), ioaddr + TxGfpMem + i * 4);
if (enable_hw_cksum)
/* Enable the Rx and Tx units, and the Rx/Tx frame processors. */
writel(TxEnable|TxGFPEnable|RxEnable|RxGFPEnable, ioaddr + GenCtrl);
printk(KERN_DEBUG "%s: Done netdev_open().\n",
dev->name);
- return 0;
+out_tx:
+ release_firmware(fw_tx);
+out_rx:
+ release_firmware(fw_rx);
+out_init:
+ if (retval)
+ netdev_close(dev);
+ return retval;
}
}
-static int start_tx(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev)
{
struct netdev_private *np = netdev_priv(dev);
unsigned int entry;
*/
if ((np->cur_tx - np->dirty_tx) + skb_num_frags(skb) * 2 > TX_RING_SIZE) {
netif_stop_queue(dev);
- return 1;
+ return NETDEV_TX_BUSY;
}
#if defined(ZEROCOPY) && defined(HAS_BROKEN_FIRMWARE)
dev->trans_start = jiffies;
- return 0;
+ return NETDEV_TX_OK;
}
handled = 1;
- if (intr_status & (IntrRxDone | IntrRxEmpty))
- netdev_rx(dev, np, ioaddr);
+ if (intr_status & (IntrRxDone | IntrRxEmpty)) {
+ u32 enable;
+
+ if (likely(napi_schedule_prep(&np->napi))) {
+ __napi_schedule(&np->napi);
+ enable = readl(ioaddr + IntrEnable);
+ enable &= ~(IntrRxDone | IntrRxEmpty);
+ writel(enable, ioaddr + IntrEnable);
+ /* flush PCI posting buffers */
+ readl(ioaddr + IntrEnable);
+ } else {
+ /* Paranoia check */
+ enable = readl(ioaddr + IntrEnable);
+ if (enable & (IntrRxDone | IntrRxEmpty)) {
+ printk(KERN_INFO
+ "%s: interrupt while in poll!\n",
+ dev->name);
+ enable &= ~(IntrRxDone | IntrRxEmpty);
+ writel(enable, ioaddr + IntrEnable);
+ }
+ }
+ }
/* Scavenge the skbuff list based on the Tx-done queue.
There are redundant checks here that may be cleaned up
}
-/* This routine is logically part of the interrupt/poll handler, but separated
- for clarity, code sharing between NAPI/non-NAPI, and better register allocation. */
+/*
+ * This routine is logically part of the interrupt/poll handler, but separated
+ * for clarity and better register allocation.
+ */
static int __netdev_rx(struct net_device *dev, int *quota)
{
struct netdev_private *np = netdev_priv(dev);
printk(KERN_DEBUG " netdev_rx() normal Rx pkt length %d, quota %d.\n", pkt_len, *quota);
/* Check if the packet is long enough to accept without copying
to a minimally-sized skbuff. */
- if (pkt_len < rx_copybreak
- && (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
+ if (pkt_len < rx_copybreak &&
+ (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
skb_reserve(skb, 2); /* 16 byte align the IP header */
pci_dma_sync_single_for_cpu(np->pci_dev,
np->rx_info[entry].mapping,
#ifndef final_version /* Remove after testing. */
/* You will want this info for the initial debug. */
if (debug > 5) {
- DECLARE_MAC_BUF(mac);
- DECLARE_MAC_BUF(mac2);
-
- printk(KERN_DEBUG " Rx data %s %s"
- " %2.2x%2.2x.\n",
- print_mac(mac, &skb->data[0]),
- print_mac(mac2, &skb->data[6]),
+ printk(KERN_DEBUG " Rx data %pM %pM %2.2x%2.2x.\n",
+ skb->data, skb->data + 6,
skb->data[12], skb->data[13]);
}
#endif
}
#ifdef VLAN_SUPPORT
if (np->vlgrp && le16_to_cpu(desc->status2) & 0x0200) {
- if (debug > 4)
- printk(KERN_DEBUG " netdev_rx() vlanid = %d\n", le16_to_cpu(desc->vlanid));
- /* vlan_netdev_receive_skb() expects a packet with the VLAN tag stripped out */
- vlan_netdev_receive_skb(skb, np->vlgrp, le16_to_cpu(desc->vlanid) & VLAN_VID_MASK);
+ u16 vlid = le16_to_cpu(desc->vlanid);
+
+ if (debug > 4) {
+ printk(KERN_DEBUG " netdev_rx() vlanid = %d\n",
+ vlid);
+ }
+ /*
+ * vlan_hwaccel_rx expects a packet with the VLAN tag
+ * stripped out.
+ */
+ vlan_hwaccel_rx(skb, np->vlgrp, vlid);
} else
#endif /* VLAN_SUPPORT */
- netdev_receive_skb(skb);
- dev->last_rx = jiffies;
+ netif_receive_skb(skb);
np->stats.rx_packets++;
next_rx:
desc->status = 0;
np->rx_done = (np->rx_done + 1) % DONE_Q_SIZE;
}
+
+ if (*quota == 0) { /* out of rx quota */
+ retcode = 1;
+ goto out;
+ }
writew(np->rx_done, np->base + CompletionQConsumerIdx);
out:
return retcode;
}
-
-#ifdef HAVE_NETDEV_POLL
static int netdev_poll(struct napi_struct *napi, int budget)
{
struct netdev_private *np = container_of(napi, struct netdev_private, napi);
intr_status = readl(ioaddr + IntrStatus);
} while (intr_status & (IntrRxDone | IntrRxEmpty));
- netif_rx_complete(dev, napi);
+ napi_complete(napi);
intr_status = readl(ioaddr + IntrEnable);
intr_status |= IntrRxDone | IntrRxEmpty;
writel(intr_status, ioaddr + IntrEnable);
/* Restart Rx engine if stopped. */
return budget - quota;
}
-#endif /* HAVE_NETDEV_POLL */
-
static void refill_rx_ring(struct net_device *dev)
{
if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
rx_mode |= AcceptAll;
- } else if ((dev->mc_count > multicast_filter_limit)
- || (dev->flags & IFF_ALLMULTI)) {
+ } else if ((netdev_mc_count(dev) > multicast_filter_limit) ||
+ (dev->flags & IFF_ALLMULTI)) {
/* Too many to match, or accept all multicasts. */
rx_mode |= AcceptBroadcast|AcceptAllMulticast|PerfectFilter;
- } else if (dev->mc_count <= 14) {
+ } else if (netdev_mc_count(dev) <= 14) {
/* Use the 16 element perfect filter, skip first two entries. */
void __iomem *filter_addr = ioaddr + PerfFilterTable + 2 * 16;
__be16 *eaddrs;
- for (i = 2, mclist = dev->mc_list; mclist && i < dev->mc_count + 2;
- i++, mclist = mclist->next) {
+ netdev_for_each_mc_addr(mclist, dev) {
eaddrs = (__be16 *)mclist->dmi_addr;
writew(be16_to_cpu(eaddrs[2]), filter_addr); filter_addr += 4;
writew(be16_to_cpu(eaddrs[1]), filter_addr); filter_addr += 4;
writew(be16_to_cpu(eaddrs[0]), filter_addr); filter_addr += 8;
}
eaddrs = (__be16 *)dev->dev_addr;
+ i = netdev_mc_count(dev) + 2;
while (i++ < 16) {
writew(be16_to_cpu(eaddrs[0]), filter_addr); filter_addr += 4;
writew(be16_to_cpu(eaddrs[1]), filter_addr); filter_addr += 4;
__le16 mc_filter[32] __attribute__ ((aligned(sizeof(long)))); /* Multicast hash filter */
memset(mc_filter, 0, sizeof(mc_filter));
- for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
- i++, mclist = mclist->next) {
+ netdev_for_each_mc_addr(mclist, dev) {
/* The chip uses the upper 9 CRC bits
as index into the hash table */
int bit_nr = ether_crc_le(ETH_ALEN, mclist->dmi_addr) >> 23;
int i;
netif_stop_queue(dev);
-#ifdef HAVE_NETDEV_POLL
+
napi_disable(&np->napi);
-#endif
if (debug > 1) {
printk(KERN_DEBUG "%s: Shutting down ethercard, Intr status %#8.8x.\n",
/* when a module, this is printed whether or not devices are found in probe */
#ifdef MODULE
printk(version);
-#ifdef HAVE_NETDEV_POLL
+
printk(KERN_INFO DRV_NAME ": polling (NAPI) enabled\n");
-#else
- printk(KERN_INFO DRV_NAME ": polling (NAPI) disabled\n");
-#endif
#endif
/* we can do this test only at run-time... sigh */