#include <linux/crc32.h>
#include <linux/kernel.h>
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/dma-mapping.h>
#include "sky2.h"
#define DRV_NAME "sky2"
-#define DRV_VERSION "1.17"
+#define DRV_VERSION "1.22"
#define PFX DRV_NAME " "
/*
#define RX_LE_BYTES (RX_LE_SIZE*sizeof(struct sky2_rx_le))
#define RX_MAX_PENDING (RX_LE_SIZE/6 - 2)
#define RX_DEF_PENDING RX_MAX_PENDING
-#define RX_SKB_ALIGN 8
#define TX_RING_SIZE 512
#define TX_DEF_PENDING (TX_RING_SIZE - 1)
module_param(disable_msi, int, 0);
MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
-static const struct pci_device_id sky2_id_table[] = {
+static DEFINE_PCI_DEVICE_TABLE(sky2_id_table) = {
{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) }, /* SK-9Sxx */
{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, /* SK-9Exx */
{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) }, /* DGE-560T */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4351) }, /* 88E8036 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4352) }, /* 88E8038 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4353) }, /* 88E8039 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4354) }, /* 88E8040 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4355) }, /* 88E8040T */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4356) }, /* 88EC033 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4357) }, /* 88E8042 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x435A) }, /* 88E8048 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4360) }, /* 88E8052 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4361) }, /* 88E8050 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4362) }, /* 88E8053 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4363) }, /* 88E8055 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4364) }, /* 88E8056 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4365) }, /* 88E8070 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4366) }, /* 88EC036 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4367) }, /* 88EC032 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4368) }, /* 88EC034 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4369) }, /* 88EC042 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436A) }, /* 88E8058 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436B) }, /* 88E8071 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436C) }, /* 88E8072 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436D) }, /* 88E8055 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4370) }, /* 88E8075 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4380) }, /* 88E8057 */
{ 0 }
};
static const unsigned rxqaddr[] = { Q_R1, Q_R2 };
static const u32 portirq_msk[] = { Y2_IS_PORT_1, Y2_IS_PORT_2 };
-/* This driver supports yukon2 chipset only */
-static const char *yukon2_name[] = {
- "XL", /* 0xb3 */
- "EC Ultra", /* 0xb4 */
- "Extreme", /* 0xb5 */
- "EC", /* 0xb6 */
- "FE", /* 0xb7 */
-};
-
static void sky2_set_multicast(struct net_device *dev);
-/* Access to external PHY */
+/* Access to PHY via serial interconnect */
static int gm_phy_write(struct sky2_hw *hw, unsigned port, u16 reg, u16 val)
{
int i;
GM_SMI_CT_PHY_AD(PHY_ADDR_MARV) | GM_SMI_CT_REG_AD(reg));
for (i = 0; i < PHY_RETRIES; i++) {
- if (!(gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_BUSY))
+ u16 ctrl = gma_read16(hw, port, GM_SMI_CTRL);
+ if (ctrl == 0xffff)
+ goto io_error;
+
+ if (!(ctrl & GM_SMI_CT_BUSY))
return 0;
- udelay(1);
+
+ udelay(10);
}
- printk(KERN_WARNING PFX "%s: phy write timeout\n", hw->dev[port]->name);
+ dev_warn(&hw->pdev->dev,"%s: phy write timeout\n", hw->dev[port]->name);
return -ETIMEDOUT;
+
+io_error:
+ dev_err(&hw->pdev->dev, "%s: phy I/O error\n", hw->dev[port]->name);
+ return -EIO;
}
static int __gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg, u16 *val)
| GM_SMI_CT_REG_AD(reg) | GM_SMI_CT_OP_RD);
for (i = 0; i < PHY_RETRIES; i++) {
- if (gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_RD_VAL) {
+ u16 ctrl = gma_read16(hw, port, GM_SMI_CTRL);
+ if (ctrl == 0xffff)
+ goto io_error;
+
+ if (ctrl & GM_SMI_CT_RD_VAL) {
*val = gma_read16(hw, port, GM_SMI_DATA);
return 0;
}
- udelay(1);
+ udelay(10);
}
+ dev_warn(&hw->pdev->dev, "%s: phy read timeout\n", hw->dev[port]->name);
return -ETIMEDOUT;
+io_error:
+ dev_err(&hw->pdev->dev, "%s: phy I/O error\n", hw->dev[port]->name);
+ return -EIO;
}
-static u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg)
+static inline u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg)
{
u16 v;
-
- if (__gm_phy_read(hw, port, reg, &v) != 0)
- printk(KERN_WARNING PFX "%s: phy read timeout\n", hw->dev[port]->name);
+ __gm_phy_read(hw, port, reg, &v);
return v;
}
else
sky2_write8(hw, B2_Y2_CLK_GATE, 0);
- if (hw->chip_id == CHIP_ID_YUKON_EC_U ||
- hw->chip_id == CHIP_ID_YUKON_EX) {
+ if (hw->flags & SKY2_HW_ADV_POWER_CTL) {
u32 reg;
sky2_pci_write32(hw, PCI_DEV_REG3, 0);
/* disable all GMAC IRQ's */
sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), 0);
- /* disable PHY IRQs */
- gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0);
gma_write16(hw, port, GM_MC_ADDR_H1, 0); /* clear MC hash */
gma_write16(hw, port, GM_MC_ADDR_H2, 0);
/* flow control to advertise bits when using 1000BaseX */
static const u16 fiber_fc_adv[] = {
- [FC_BOTH] = PHY_M_P_BOTH_MD_X,
+ [FC_NONE] = PHY_M_P_NO_PAUSE_X,
[FC_TX] = PHY_M_P_ASYM_MD_X,
[FC_RX] = PHY_M_P_SYM_MD_X,
- [FC_NONE] = PHY_M_P_NO_PAUSE_X,
+ [FC_BOTH] = PHY_M_P_BOTH_MD_X,
};
/* flow control to GMA disable bits */
struct sky2_port *sky2 = netdev_priv(hw->dev[port]);
u16 ctrl, ct1000, adv, pg, ledctrl, ledover, reg;
- if (sky2->autoneg == AUTONEG_ENABLE
- && !(hw->chip_id == CHIP_ID_YUKON_XL
- || hw->chip_id == CHIP_ID_YUKON_EC_U
- || hw->chip_id == CHIP_ID_YUKON_EX)) {
+ if (sky2->autoneg == AUTONEG_ENABLE &&
+ !(hw->flags & SKY2_HW_NEWER_PHY)) {
u16 ectrl = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL);
ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK |
ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
if (sky2_is_copper(hw)) {
- if (hw->chip_id == CHIP_ID_YUKON_FE) {
+ if (!(hw->flags & SKY2_HW_GIGABIT)) {
/* enable automatic crossover */
ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO) >> 1;
+
+ if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
+ hw->chip_rev == CHIP_REV_YU_FE2_A0) {
+ u16 spec;
+
+ /* Enable Class A driver for FE+ A0 */
+ spec = gm_phy_read(hw, port, PHY_MARV_FE_SPEC_2);
+ spec |= PHY_M_FESC_SEL_CL_A;
+ gm_phy_write(hw, port, PHY_MARV_FE_SPEC_2, spec);
+ }
} else {
/* disable energy detect */
ctrl &= ~PHY_M_PC_EN_DET_MSK;
/* downshift on PHY 88E1112 and 88E1149 is changed */
if (sky2->autoneg == AUTONEG_ENABLE
- && (hw->chip_id == CHIP_ID_YUKON_XL
- || hw->chip_id == CHIP_ID_YUKON_EC_U
- || hw->chip_id == CHIP_ID_YUKON_EX)) {
+ && (hw->flags & SKY2_HW_NEWER_PHY)) {
/* set downshift counter to 3x and enable downshift */
ctrl &= ~PHY_M_PC_DSC_MSK;
ctrl |= PHY_M_PC_DSC(2) | PHY_M_PC_DOWN_S_ENA;
gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
/* special setup for PHY 88E1112 Fiber */
- if (hw->chip_id == CHIP_ID_YUKON_XL && !sky2_is_copper(hw)) {
+ if (hw->chip_id == CHIP_ID_YUKON_XL && (hw->flags & SKY2_HW_FIBRE_PHY)) {
pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
/* Fiber: select 1000BASE-X only mode MAC Specific Ctrl Reg. */
gma_write16(hw, port, GM_GP_CTRL, reg);
- if (hw->chip_id != CHIP_ID_YUKON_FE)
+ if (hw->flags & SKY2_HW_GIGABIT)
gm_phy_write(hw, port, PHY_MARV_1000T_CTRL, ct1000);
gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, adv);
gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR, ctrl);
break;
+ case CHIP_ID_YUKON_FE_P:
+ /* Enable Link Partner Next Page */
+ ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
+ ctrl |= PHY_M_PC_ENA_LIP_NP;
+
+ /* disable Energy Detect and enable scrambler */
+ ctrl &= ~(PHY_M_PC_ENA_ENE_DT | PHY_M_PC_DIS_SCRAMB);
+ gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
+
+ /* set LED2 -> ACT, LED1 -> LINK, LED0 -> SPEED */
+ ctrl = PHY_M_FELP_LED2_CTRL(LED_PAR_CTRL_ACT_BL) |
+ PHY_M_FELP_LED1_CTRL(LED_PAR_CTRL_LINK) |
+ PHY_M_FELP_LED0_CTRL(LED_PAR_CTRL_SPEED);
+
+ gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR, ctrl);
+ break;
+
case CHIP_ID_YUKON_XL:
pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
case CHIP_ID_YUKON_EC_U:
case CHIP_ID_YUKON_EX:
+ case CHIP_ID_YUKON_SUPR:
pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
/* select page 3 to access LED control register */
default:
/* set Tx LED (LED_TX) to blink mode on Rx OR Tx activity */
ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL;
+
/* turn off the Rx LED (LED_RX) */
- ledover &= ~PHY_M_LED_MO_RX;
+ ledover |= PHY_M_LED_MO_RX(MO_LED_OFF);
}
- if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
- hw->chip_rev == CHIP_REV_YU_EC_U_A1) {
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_UL_2) {
/* apply fixes in PHY AFE */
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 255);
gm_phy_write(hw, port, 0x18, 0xaa99);
gm_phy_write(hw, port, 0x17, 0x2011);
- /* fix for IEEE A/B Symmetry failure in 1000BASE-T */
- gm_phy_write(hw, port, 0x18, 0xa204);
- gm_phy_write(hw, port, 0x17, 0x2002);
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
+ /* fix for IEEE A/B Symmetry failure in 1000BASE-T */
+ gm_phy_write(hw, port, 0x18, 0xa204);
+ gm_phy_write(hw, port, 0x17, 0x2002);
+ }
/* set page register to 0 */
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
- } else if (hw->chip_id != CHIP_ID_YUKON_EX) {
+ } else if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
+ hw->chip_rev == CHIP_REV_YU_FE2_A0) {
+ /* apply workaround for integrated resistors calibration */
+ gm_phy_write(hw, port, PHY_MARV_PAGE_ADDR, 17);
+ gm_phy_write(hw, port, PHY_MARV_PAGE_DATA, 0x3f60);
+ } else if (hw->chip_id != CHIP_ID_YUKON_EX &&
+ hw->chip_id < CHIP_ID_YUKON_SUPR) {
+ /* no effect on Yukon-XL */
gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) {
/* turn on 100 Mbps LED (LED_LINK100) */
- ledover |= PHY_M_LED_MO_100;
+ ledover |= PHY_M_LED_MO_100(MO_LED_ON);
}
if (ledover)
gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
}
-static void sky2_phy_power(struct sky2_hw *hw, unsigned port, int onoff)
+static const u32 phy_power[] = { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD };
+static const u32 coma_mode[] = { PCI_Y2_PHY1_COMA, PCI_Y2_PHY2_COMA };
+
+static void sky2_phy_power_up(struct sky2_hw *hw, unsigned port)
{
u32 reg1;
- static const u32 phy_power[]
- = { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD };
-
- /* looks like this XL is back asswards .. */
- if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
- onoff = !onoff;
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
- if (onoff)
- /* Turn off phy power saving */
- reg1 &= ~phy_power[port];
- else
- reg1 |= phy_power[port];
+ reg1 &= ~phy_power[port];
+
+ if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
+ reg1 |= coma_mode[port];
sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
sky2_pci_read32(hw, PCI_DEV_REG1);
+
+ if (hw->chip_id == CHIP_ID_YUKON_FE)
+ gm_phy_write(hw, port, PHY_MARV_CTRL, PHY_CT_ANE);
+ else if (hw->flags & SKY2_HW_ADV_POWER_CTL)
+ sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
+}
+
+static void sky2_phy_power_down(struct sky2_hw *hw, unsigned port)
+{
+ u32 reg1;
+ u16 ctrl;
+
+ /* release GPHY Control reset */
+ sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
+
+ /* release GMAC reset */
+ sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
+
+ if (hw->flags & SKY2_HW_NEWER_PHY) {
+ /* select page 2 to access MAC control register */
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2);
+
+ ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
+ /* allow GMII Power Down */
+ ctrl &= ~PHY_M_MAC_GMIF_PUP;
+ gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
+
+ /* set page register back to 0 */
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
+ }
+
+ /* setup General Purpose Control Register */
+ gma_write16(hw, port, GM_GP_CTRL,
+ GM_GPCR_FL_PASS | GM_GPCR_SPEED_100 | GM_GPCR_AU_ALL_DIS);
+
+ if (hw->chip_id != CHIP_ID_YUKON_EC) {
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
+ /* select page 2 to access MAC control register */
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2);
+
+ ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
+ /* enable Power Down */
+ ctrl |= PHY_M_PC_POW_D_ENA;
+ gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
+
+ /* set page register back to 0 */
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
+ }
+
+ /* set IEEE compatible Power Down Mode (dev. #4.99) */
+ gm_phy_write(hw, port, PHY_MARV_CTRL, PHY_CT_PDOWN);
+ }
+
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
+ reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
+ reg1 |= phy_power[port]; /* set PHY to PowerDown/COMA Mode */
+ sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
- udelay(100);
}
/* Force a renegotiation */
sky2->advertising &= ~(ADVERTISED_1000baseT_Half|ADVERTISED_1000baseT_Full);
sky2->flow_mode = FC_NONE;
- sky2_phy_power(hw, port, 1);
- sky2_phy_reinit(sky2);
+
+ spin_lock_bh(&sky2->phy_lock);
+ sky2_phy_power_up(hw, port);
+ sky2_phy_init(hw, port);
+ spin_unlock_bh(&sky2->phy_lock);
sky2->flow_mode = save_mode;
sky2->advertising = ctrl;
sky2_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), ctrl);
/* Turn on legacy PCI-Express PME mode */
- sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
reg1 |= PCI_Y2_PME_LEGACY;
sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
- sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
/* block receiver */
sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
static void sky2_set_tx_stfwd(struct sky2_hw *hw, unsigned port)
{
- if (hw->chip_id == CHIP_ID_YUKON_EX && hw->chip_rev != CHIP_REV_YU_EX_A0) {
- sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
- TX_STFW_ENA |
- (hw->dev[port]->mtu > ETH_DATA_LEN) ? TX_JUMBO_ENA : TX_JUMBO_DIS);
+ struct net_device *dev = hw->dev[port];
+
+ if ( (hw->chip_id == CHIP_ID_YUKON_EX &&
+ hw->chip_rev != CHIP_REV_YU_EX_A0) ||
+ hw->chip_id == CHIP_ID_YUKON_FE_P ||
+ hw->chip_id == CHIP_ID_YUKON_SUPR) {
+ /* Yukon-Extreme B0 and further Extreme devices */
+ /* enable Store & Forward mode for TX */
+
+ if (dev->mtu <= ETH_DATA_LEN)
+ sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
+ TX_JUMBO_DIS | TX_STFW_ENA);
+
+ else
+ sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
+ TX_JUMBO_ENA| TX_STFW_ENA);
} else {
- if (hw->dev[port]->mtu > ETH_DATA_LEN) {
+ if (dev->mtu <= ETH_DATA_LEN)
+ sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_ENA);
+ else {
/* set Tx GMAC FIFO Almost Empty Threshold */
sky2_write32(hw, SK_REG(port, TX_GMF_AE_THR),
(ECU_JUMBO_WM << 16) | ECU_AE_THR);
- sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
- TX_JUMBO_ENA | TX_STFW_DIS);
+ sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_DIS);
/* Can't do offload because of lack of store/forward */
- hw->dev[port]->features &= ~(NETIF_F_TSO | NETIF_F_SG
- | NETIF_F_ALL_CSUM);
- } else
- sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
- TX_JUMBO_DIS | TX_STFW_ENA);
+ dev->features &= ~(NETIF_F_TSO | NETIF_F_SG | NETIF_F_ALL_CSUM);
+ }
}
}
sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), GMAC_DEF_MSK);
spin_lock_bh(&sky2->phy_lock);
+ sky2_phy_power_up(hw, port);
sky2_phy_init(hw, port);
spin_unlock_bh(&sky2->phy_lock);
/* Configure Rx MAC FIFO */
sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR);
rx_reg = GMF_OPER_ON | GMF_RX_F_FL_ON;
- if (hw->chip_id == CHIP_ID_YUKON_EX)
+ if (hw->chip_id == CHIP_ID_YUKON_EX ||
+ hw->chip_id == CHIP_ID_YUKON_FE_P)
rx_reg |= GMF_RX_OVER_ON;
sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), rx_reg);
- /* Flush Rx MAC FIFO on any flow control or error */
- sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR);
+ if (hw->chip_id == CHIP_ID_YUKON_XL) {
+ /* Hardware errata - clear flush mask */
+ sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), 0);
+ } else {
+ /* Flush Rx MAC FIFO on any flow control or error */
+ sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR);
+ }
/* Set threshold to 0xa (64 bytes) + 1 to workaround pause bug */
- sky2_write16(hw, SK_REG(port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF+1);
+ reg = RX_GMF_FL_THR_DEF + 1;
+ /* Another magic mystery workaround from sk98lin */
+ if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
+ hw->chip_rev == CHIP_REV_YU_FE2_A0)
+ reg = 0x178;
+ sky2_write16(hw, SK_REG(port, RX_GMF_FL_THR), reg);
/* Configure Tx MAC FIFO */
sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR);
sky2_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON);
- if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX) {
+ /* On chips without ram buffer, pause is controled by MAC level */
+ if (!(hw->flags & SKY2_HW_RAM_BUFFER)) {
sky2_write8(hw, SK_REG(port, RX_GMF_LP_THR), 768/8);
sky2_write8(hw, SK_REG(port, RX_GMF_UP_THR), 1024/8);
sky2_set_tx_stfwd(hw, port);
}
+ if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
+ hw->chip_rev == CHIP_REV_YU_FE2_A0) {
+ /* disable dynamic watermark */
+ reg = sky2_read16(hw, SK_REG(port, TX_GMF_EA));
+ reg &= ~TX_DYN_WM_ENA;
+ sky2_write16(hw, SK_REG(port, TX_GMF_EA), reg);
+ }
}
/* Assign Ram Buffer allocation to queue */
return le;
}
+static void tx_init(struct sky2_port *sky2)
+{
+ struct sky2_tx_le *le;
+
+ sky2->tx_prod = sky2->tx_cons = 0;
+ sky2->tx_tcpsum = 0;
+ sky2->tx_last_mss = 0;
+
+ le = get_tx_le(sky2);
+ le->addr = 0;
+ le->opcode = OP_ADDR64 | HW_OWNER;
+}
+
static inline struct tx_ring_info *tx_le_re(struct sky2_port *sky2,
struct sky2_tx_le *le)
{
dma_addr_t map, unsigned len)
{
struct sky2_rx_le *le;
- u32 hi = upper_32_bits(map);
- if (sky2->rx_addr64 != hi) {
+ if (sizeof(dma_addr_t) > sizeof(u32)) {
le = sky2_next_rx(sky2);
- le->addr = cpu_to_le32(hi);
+ le->addr = cpu_to_le32(upper_32_bits(map));
le->opcode = OP_ADDR64 | HW_OWNER;
- sky2->rx_addr64 = upper_32_bits(map + len);
}
le = sky2_next_rx(sky2);
*/
static void rx_set_checksum(struct sky2_port *sky2)
{
- struct sky2_rx_le *le;
-
- if (sky2->hw->chip_id != CHIP_ID_YUKON_EX) {
- le = sky2_next_rx(sky2);
- le->addr = cpu_to_le32((ETH_HLEN << 16) | ETH_HLEN);
- le->ctrl = 0;
- le->opcode = OP_TCPSTART | HW_OWNER;
+ struct sky2_rx_le *le = sky2_next_rx(sky2);
- sky2_write32(sky2->hw,
- Q_ADDR(rxqaddr[sky2->port], Q_CSR),
- sky2->rx_csum ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
- }
+ le->addr = cpu_to_le32((ETH_HLEN << 16) | ETH_HLEN);
+ le->ctrl = 0;
+ le->opcode = OP_TCPSTART | HW_OWNER;
+ sky2_write32(sky2->hw,
+ Q_ADDR(rxqaddr[sky2->port], Q_CSR),
+ sky2->rx_csum ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
}
/*
}
#ifdef SKY2_VLAN_TAG_USED
-static void sky2_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
+static void sky2_set_vlan_mode(struct sky2_hw *hw, u16 port, bool onoff)
{
- struct sky2_port *sky2 = netdev_priv(dev);
- struct sky2_hw *hw = sky2->hw;
- u16 port = sky2->port;
-
- netif_tx_lock_bh(dev);
- netif_poll_disable(sky2->hw->dev[0]);
-
- sky2->vlgrp = grp;
- if (grp) {
+ if (onoff) {
sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
RX_VLAN_STRIP_ON);
sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
TX_VLAN_TAG_OFF);
}
+}
+
+static void sky2_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
+ u16 port = sky2->port;
+
+ netif_tx_lock_bh(dev);
+ napi_disable(&hw->napi);
+
+ sky2->vlgrp = grp;
+ sky2_set_vlan_mode(hw, port, grp != NULL);
- netif_poll_enable(sky2->hw->dev[0]);
+ sky2_read32(hw, B0_Y2_SP_LISR);
+ napi_enable(&hw->napi);
netif_tx_unlock_bh(dev);
}
#endif
/*
* Allocate an skb for receiving. If the MTU is large enough
* make the skb non-linear with a fragment list of pages.
- *
- * It appears the hardware has a bug in the FIFO logic that
- * cause it to hang if the FIFO gets overrun and the receive buffer
- * is not 64 byte aligned. The buffer returned from netdev_alloc_skb is
- * aligned except if slab debugging is enabled.
*/
static struct sk_buff *sky2_rx_alloc(struct sky2_port *sky2)
{
struct sk_buff *skb;
- unsigned long p;
int i;
- skb = netdev_alloc_skb(sky2->netdev, sky2->rx_data_size + RX_SKB_ALIGN);
- if (!skb)
- goto nomem;
-
- p = (unsigned long) skb->data;
- skb_reserve(skb, ALIGN(p, RX_SKB_ALIGN) - p);
+ if (sky2->hw->flags & SKY2_HW_RAM_BUFFER) {
+ unsigned char *start;
+ /*
+ * Workaround for a bug in FIFO that cause hang
+ * if the FIFO if the receive buffer is not 64 byte aligned.
+ * The buffer returned from netdev_alloc_skb is
+ * aligned except if slab debugging is enabled.
+ */
+ skb = netdev_alloc_skb(sky2->netdev, sky2->rx_data_size + 8);
+ if (!skb)
+ goto nomem;
+ start = PTR_ALIGN(skb->data, 8);
+ skb_reserve(skb, start - skb->data);
+ } else {
+ skb = netdev_alloc_skb(sky2->netdev,
+ sky2->rx_data_size + NET_IP_ALIGN);
+ if (!skb)
+ goto nomem;
+ skb_reserve(skb, NET_IP_ALIGN);
+ }
for (i = 0; i < sky2->rx_nfrags; i++) {
struct page *page = alloc_page(GFP_ATOMIC);
struct sky2_hw *hw = sky2->hw;
struct rx_ring_info *re;
unsigned rxq = rxqaddr[sky2->port];
- unsigned i, size, space, thresh;
+ unsigned i, size, thresh;
sky2->rx_put = sky2->rx_next = 0;
sky2_qset(hw, rxq);
sky2_prefetch_init(hw, rxq, sky2->rx_le_map, RX_LE_SIZE - 1);
- rx_set_checksum(sky2);
+ if (!(hw->flags & SKY2_HW_NEW_LE))
+ rx_set_checksum(sky2);
/* Space needed for frame data + headers rounded up */
size = roundup(sky2->netdev->mtu + ETH_HLEN + VLAN_HLEN, 8);
/* Stopping point for hardware truncation */
thresh = (size - 8) / sizeof(u32);
- /* Account for overhead of skb - to avoid order > 0 allocation */
- space = SKB_DATA_ALIGN(size) + NET_SKB_PAD
- + sizeof(struct skb_shared_info);
-
- sky2->rx_nfrags = space >> PAGE_SHIFT;
+ sky2->rx_nfrags = size >> PAGE_SHIFT;
BUG_ON(sky2->rx_nfrags > ARRAY_SIZE(re->frag_addr));
- if (sky2->rx_nfrags != 0) {
- /* Compute residue after pages */
- space = sky2->rx_nfrags << PAGE_SHIFT;
+ /* Compute residue after pages */
+ size -= sky2->rx_nfrags << PAGE_SHIFT;
- if (space < size)
- size -= space;
- else
- size = 0;
+ /* Optimize to handle small packets and headers */
+ if (size < copybreak)
+ size = copybreak;
+ if (size < ETH_HLEN)
+ size = ETH_HLEN;
- /* Optimize to handle small packets and headers */
- if (size < copybreak)
- size = copybreak;
- if (size < ETH_HLEN)
- size = ETH_HLEN;
- }
sky2->rx_data_size = size;
/* Fill Rx ring */
struct sky2_port *sky2 = netdev_priv(dev);
struct sky2_hw *hw = sky2->hw;
unsigned port = sky2->port;
- u32 ramsize, imask;
+ u32 imask, ramsize;
int cap, err = -ENOMEM;
struct net_device *otherdev = hw->dev[sky2->port^1];
*/
if (otherdev && netif_running(otherdev) &&
(cap = pci_find_capability(hw->pdev, PCI_CAP_ID_PCIX))) {
- struct sky2_port *osky2 = netdev_priv(otherdev);
u16 cmd;
- cmd = sky2_pci_read16(hw, cap + PCI_X_CMD);
+ cmd = sky2_pci_read16(hw, cap + PCI_X_CMD);
cmd &= ~PCI_X_CMD_MAX_SPLIT;
sky2_pci_write16(hw, cap + PCI_X_CMD, cmd);
- sky2->rx_csum = 0;
- osky2->rx_csum = 0;
}
if (netif_msg_ifup(sky2))
GFP_KERNEL);
if (!sky2->tx_ring)
goto err_out;
- sky2->tx_prod = sky2->tx_cons = 0;
+
+ tx_init(sky2);
sky2->rx_le = pci_alloc_consistent(hw->pdev, RX_LE_BYTES,
&sky2->rx_le_map);
if (!sky2->rx_ring)
goto err_out;
- sky2_phy_power(hw, port, 1);
-
sky2_mac_init(hw, port);
/* Register is number of 4K blocks on internal RAM buffer. */
ramsize = sky2_read8(hw, B2_E_0) * 4;
- printk(KERN_INFO PFX "%s: ram buffer %dK\n", dev->name, ramsize);
-
if (ramsize > 0) {
u32 rxspace;
+ hw->flags |= SKY2_HW_RAM_BUFFER;
+ pr_debug(PFX "%s: ram buffer %dK\n", dev->name, ramsize);
if (ramsize < 16)
rxspace = ramsize / 2;
else
sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map,
TX_RING_SIZE - 1);
+#ifdef SKY2_VLAN_TAG_USED
+ sky2_set_vlan_mode(hw, port, sky2->vlgrp != NULL);
+#endif
+
err = sky2_rx_start(sky2);
if (err)
goto err_out;
imask |= portirq_msk[port];
sky2_write32(hw, B0_IMSK, imask);
+ sky2_set_multicast(dev);
return 0;
err_out:
struct tx_ring_info *re;
unsigned i, len;
dma_addr_t mapping;
- u32 addr64;
u16 mss;
u8 ctrl;
len = skb_headlen(skb);
mapping = pci_map_single(hw->pdev, skb->data, len, PCI_DMA_TODEVICE);
- addr64 = upper_32_bits(mapping);
- /* Send high bits if changed or crosses boundary */
- if (addr64 != sky2->tx_addr64 ||
- upper_32_bits(mapping + len) != sky2->tx_addr64) {
+ /* Send high bits if needed */
+ if (sizeof(dma_addr_t) > sizeof(u32)) {
le = get_tx_le(sky2);
- le->addr = cpu_to_le32(addr64);
+ le->addr = cpu_to_le32(upper_32_bits(mapping));
le->opcode = OP_ADDR64 | HW_OWNER;
- sky2->tx_addr64 = upper_32_bits(mapping + len);
}
/* Check for TCP Segmentation Offload */
mss = skb_shinfo(skb)->gso_size;
if (mss != 0) {
- if (hw->chip_id != CHIP_ID_YUKON_EX)
+
+ if (!(hw->flags & SKY2_HW_NEW_LE))
mss += ETH_HLEN + ip_hdrlen(skb) + tcp_hdrlen(skb);
if (mss != sky2->tx_last_mss) {
le = get_tx_le(sky2);
le->addr = cpu_to_le32(mss);
- if (hw->chip_id == CHIP_ID_YUKON_EX)
+
+ if (hw->flags & SKY2_HW_NEW_LE)
le->opcode = OP_MSS | HW_OWNER;
else
le->opcode = OP_LRGLEN | HW_OWNER;
/* Handle TCP checksum offload */
if (skb->ip_summed == CHECKSUM_PARTIAL) {
/* On Yukon EX (some versions) encoding change. */
- if (hw->chip_id == CHIP_ID_YUKON_EX
- && hw->chip_rev != CHIP_REV_YU_EX_B0)
+ if (hw->flags & SKY2_HW_AUTO_TX_SUM)
ctrl |= CALSUM; /* auto checksum */
else {
const unsigned offset = skb_transport_offset(skb);
mapping = pci_map_page(hw->pdev, frag->page, frag->page_offset,
frag->size, PCI_DMA_TODEVICE);
- addr64 = upper_32_bits(mapping);
- if (addr64 != sky2->tx_addr64) {
+
+ if (sizeof(dma_addr_t) > sizeof(u32)) {
le = get_tx_le(sky2);
- le->addr = cpu_to_le32(addr64);
+ le->addr = cpu_to_le32(upper_32_bits(mapping));
le->ctrl = 0;
le->opcode = OP_ADDR64 | HW_OWNER;
- sky2->tx_addr64 = addr64;
}
le = get_tx_le(sky2);
printk(KERN_DEBUG "%s: tx done %u\n",
dev->name, idx);
- sky2->net_stats.tx_packets++;
- sky2->net_stats.tx_bytes += re->skb->len;
+ dev->stats.tx_packets++;
+ dev->stats.tx_bytes += re->skb->len;
dev_kfree_skb_any(re->skb);
sky2->tx_next = RING_NEXT(idx, TX_RING_SIZE);
if (netif_msg_ifdown(sky2))
printk(KERN_INFO PFX "%s: disabling interface\n", dev->name);
- if (netif_carrier_ok(dev) && --hw->active == 0)
- del_timer(&hw->watchdog_timer);
-
- /* Stop more packets from being queued */
- netif_stop_queue(dev);
-
/* Disable port IRQ */
imask = sky2_read32(hw, B0_IMSK);
imask &= ~portirq_msk[port];
sky2_write32(hw, B0_IMSK, imask);
+ synchronize_irq(hw->pdev->irq);
+
sky2_gmac_reset(hw, port);
/* Stop transmitter */
ctrl &= ~(GM_GPCR_TX_ENA | GM_GPCR_RX_ENA);
gma_write16(hw, port, GM_GP_CTRL, ctrl);
+ /* Make sure no packets are pending */
+ napi_synchronize(&hw->napi);
+
sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET);
/* Workaround shared GMAC reset */
sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET);
- sky2_phy_power(hw, port, 0);
-
- netif_carrier_off(dev);
+ sky2_phy_power_down(hw, port);
/* turn off LED's */
sky2_write16(hw, B0_Y2LED, LED_STAT_OFF);
- synchronize_irq(hw->pdev->irq);
-
sky2_tx_clean(dev);
sky2_rx_clean(sky2);
static u16 sky2_phy_speed(const struct sky2_hw *hw, u16 aux)
{
- if (!sky2_is_copper(hw))
+ if (hw->flags & SKY2_HW_FIBRE_PHY)
return SPEED_1000;
- if (hw->chip_id == CHIP_ID_YUKON_FE)
- return (aux & PHY_M_PS_SPEED_100) ? SPEED_100 : SPEED_10;
+ if (!(hw->flags & SKY2_HW_GIGABIT)) {
+ if (aux & PHY_M_PS_SPEED_100)
+ return SPEED_100;
+ else
+ return SPEED_10;
+ }
switch (aux & PHY_M_PS_SPEED_MSK) {
case PHY_M_PS_SPEED_1000:
netif_carrier_on(sky2->netdev);
- if (hw->active++ == 0)
- mod_timer(&hw->watchdog_timer, jiffies + 1);
-
+ mod_timer(&hw->watchdog_timer, jiffies + 1);
/* Turn on link LED */
sky2_write8(hw, SK_REG(port, LNK_LED_REG),
LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF);
- if (hw->chip_id == CHIP_ID_YUKON_XL
- || hw->chip_id == CHIP_ID_YUKON_EC_U
- || hw->chip_id == CHIP_ID_YUKON_EX) {
- u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
- u16 led = PHY_M_LEDC_LOS_CTRL(1); /* link active */
-
- switch(sky2->speed) {
- case SPEED_10:
- led |= PHY_M_LEDC_INIT_CTRL(7);
- break;
-
- case SPEED_100:
- led |= PHY_M_LEDC_STA1_CTRL(7);
- break;
-
- case SPEED_1000:
- led |= PHY_M_LEDC_STA0_CTRL(7);
- break;
- }
-
- gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
- gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, led);
- gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
- }
-
if (netif_msg_link(sky2))
printk(KERN_INFO PFX
"%s: Link is up at %d Mbps, %s duplex, flow control %s\n",
netif_carrier_off(sky2->netdev);
- /* Stop watchdog if both ports are not active */
- if (--hw->active == 0)
- del_timer(&hw->watchdog_timer);
-
-
/* Turn on link LED */
sky2_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF);
/* Since the pause result bits seem to in different positions on
* different chips. look at registers.
*/
- if (!sky2_is_copper(hw)) {
+ if (hw->flags & SKY2_HW_FIBRE_PHY) {
/* Shift for bits in fiber PHY */
advert &= ~(ADVERTISE_PAUSE_CAP|ADVERTISE_PAUSE_ASYM);
lpa &= ~(LPA_PAUSE_CAP|LPA_PAUSE_ASYM);
if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU)
return -EINVAL;
- if (new_mtu > ETH_DATA_LEN && hw->chip_id == CHIP_ID_YUKON_FE)
+ if (new_mtu > ETH_DATA_LEN &&
+ (hw->chip_id == CHIP_ID_YUKON_FE ||
+ hw->chip_id == CHIP_ID_YUKON_FE_P))
return -EINVAL;
if (!netif_running(dev)) {
dev->trans_start = jiffies; /* prevent tx timeout */
netif_stop_queue(dev);
- netif_poll_disable(hw->dev[0]);
+ napi_disable(&hw->napi);
synchronize_irq(hw->pdev->irq);
- if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX)
+ if (!(hw->flags & SKY2_HW_RAM_BUFFER))
sky2_set_tx_stfwd(hw, port);
ctl = gma_read16(hw, port, GM_GP_CTRL);
err = sky2_rx_start(sky2);
sky2_write32(hw, B0_IMSK, imask);
+ sky2_read32(hw, B0_Y2_SP_LISR);
+ napi_enable(&hw->napi);
+
if (err)
dev_close(dev);
else {
gma_write16(hw, port, GM_GP_CTRL, ctl);
- netif_poll_enable(hw->dev[0]);
netif_wake_queue(dev);
}
sky2->rx_next = (sky2->rx_next + 1) % sky2->rx_pending;
prefetch(sky2->rx_ring + sky2->rx_next);
+ /* This chip has hardware problems that generates bogus status.
+ * So do only marginal checking and expect higher level protocols
+ * to handle crap frames.
+ */
+ if (sky2->hw->chip_id == CHIP_ID_YUKON_FE_P &&
+ sky2->hw->chip_rev == CHIP_REV_YU_FE2_A0 &&
+ length != count)
+ goto okay;
+
if (status & GMR_FS_ANY_ERR)
goto error;
/* if length reported by DMA does not match PHY, packet was truncated */
if (length != count)
- goto len_mismatch;
+ goto len_error;
+okay:
if (length < copybreak)
skb = receive_copy(sky2, re, length);
else
return skb;
-len_mismatch:
+len_error:
/* Truncation of overlength packets
causes PHY length to not match MAC length */
- ++sky2->net_stats.rx_length_errors;
+ ++dev->stats.rx_length_errors;
if (netif_msg_rx_err(sky2) && net_ratelimit())
- pr_info(PFX "%s: rx length mismatch: length %d status %#x\n",
- dev->name, length, status);
+ pr_info(PFX "%s: rx length error: status %#x length %d\n",
+ dev->name, status, length);
goto resubmit;
error:
- ++sky2->net_stats.rx_errors;
+ ++dev->stats.rx_errors;
if (status & GMR_FS_RX_FF_OV) {
- sky2->net_stats.rx_over_errors++;
+ dev->stats.rx_over_errors++;
goto resubmit;
}
dev->name, status, length);
if (status & (GMR_FS_LONG_ERR | GMR_FS_UN_SIZE))
- sky2->net_stats.rx_length_errors++;
+ dev->stats.rx_length_errors++;
if (status & GMR_FS_FRAGMENT)
- sky2->net_stats.rx_frame_errors++;
+ dev->stats.rx_frame_errors++;
if (status & GMR_FS_CRC_ERR)
- sky2->net_stats.rx_crc_errors++;
+ dev->stats.rx_crc_errors++;
goto resubmit;
}
}
/* Process status response ring */
-static int sky2_status_intr(struct sky2_hw *hw, int to_do)
+static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx)
{
int work_done = 0;
unsigned rx[2] = { 0, 0 };
- u16 hwidx = sky2_read16(hw, STAT_PUT_IDX);
rmb();
-
- while (hw->st_idx != hwidx) {
+ do {
struct sky2_port *sky2;
struct sky2_status_le *le = hw->st_le + hw->st_idx;
- unsigned port = le->css & CSS_LINK_BIT;
+ unsigned port;
struct net_device *dev;
struct sk_buff *skb;
u32 status;
u16 length;
+ u8 opcode = le->opcode;
+
+ if (!(opcode & HW_OWNER))
+ break;
hw->st_idx = RING_NEXT(hw->st_idx, STATUS_RING_SIZE);
+ port = le->css & CSS_LINK_BIT;
dev = hw->dev[port];
sky2 = netdev_priv(dev);
length = le16_to_cpu(le->length);
status = le32_to_cpu(le->status);
- switch (le->opcode & ~HW_OWNER) {
+ le->opcode = 0;
+ switch (opcode & ~HW_OWNER) {
case OP_RXSTAT:
++rx[port];
skb = sky2_receive(dev, length, status);
if (unlikely(!skb)) {
- sky2->net_stats.rx_dropped++;
+ dev->stats.rx_dropped++;
break;
}
/* This chip reports checksum status differently */
- if (hw->chip_id == CHIP_ID_YUKON_EX) {
+ if (hw->flags & SKY2_HW_NEW_LE) {
if (sky2->rx_csum &&
(le->css & (CSS_ISIPV4 | CSS_ISIPV6)) &&
(le->css & CSS_TCPUDPCSOK))
}
skb->protocol = eth_type_trans(skb, dev);
- sky2->net_stats.rx_packets++;
- sky2->net_stats.rx_bytes += skb->len;
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += skb->len;
dev->last_rx = jiffies;
#ifdef SKY2_VLAN_TAG_USED
if (!sky2->rx_csum)
break;
- if (hw->chip_id == CHIP_ID_YUKON_EX)
+ /* If this happens then driver assuming wrong format */
+ if (unlikely(hw->flags & SKY2_HW_NEW_LE)) {
+ if (net_ratelimit())
+ printk(KERN_NOTICE "%s: unexpected"
+ " checksum status\n",
+ dev->name);
break;
+ }
/* Both checksum counters are programmed to start at
* the same offset, so unless there is a problem they
default:
if (net_ratelimit())
printk(KERN_WARNING PFX
- "unknown status opcode 0x%x\n", le->opcode);
+ "unknown status opcode 0x%x\n", opcode);
}
- }
+ } while (hw->st_idx != idx);
/* Fully processed status ring so clear irq */
sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
static void sky2_hw_intr(struct sky2_hw *hw)
{
+ struct pci_dev *pdev = hw->pdev;
u32 status = sky2_read32(hw, B0_HWE_ISRC);
+ u32 hwmsk = sky2_read32(hw, B0_HWE_IMSK);
+
+ status &= hwmsk;
if (status & Y2_IS_TIST_OV)
sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ);
if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) {
u16 pci_err;
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
pci_err = sky2_pci_read16(hw, PCI_STATUS);
if (net_ratelimit())
- dev_err(&hw->pdev->dev, "PCI hardware error (0x%x)\n",
+ dev_err(&pdev->dev, "PCI hardware error (0x%x)\n",
pci_err);
- sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
sky2_pci_write16(hw, PCI_STATUS,
- pci_err | PCI_STATUS_ERROR_BITS);
+ pci_err | PCI_STATUS_ERROR_BITS);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
}
if (status & Y2_IS_PCI_EXP) {
/* PCI-Express uncorrectable Error occurred */
- u32 pex_err;
-
- pex_err = sky2_pci_read32(hw, PEX_UNC_ERR_STAT);
+ u32 err;
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
+ err = sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
+ sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
+ 0xfffffffful);
if (net_ratelimit())
- dev_err(&hw->pdev->dev, "PCI Express error (0x%x)\n",
- pex_err);
-
- /* clear the interrupt */
- sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
- sky2_pci_write32(hw, PEX_UNC_ERR_STAT,
- 0xffffffffUL);
- sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
-
- if (pex_err & PEX_FATAL_ERRORS) {
- u32 hwmsk = sky2_read32(hw, B0_HWE_IMSK);
- hwmsk &= ~Y2_IS_PCI_EXP;
- sky2_write32(hw, B0_HWE_IMSK, hwmsk);
- }
+ dev_err(&pdev->dev, "PCI Express error (0x%x)\n", err);
+
+ sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
}
if (status & Y2_HWE_L1_MASK)
gma_read16(hw, port, GM_TX_IRQ_SRC);
if (status & GM_IS_RX_FF_OR) {
- ++sky2->net_stats.rx_fifo_errors;
+ ++dev->stats.rx_fifo_errors;
sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_CLI_RX_FO);
}
if (status & GM_IS_TX_FF_UR) {
- ++sky2->net_stats.tx_fifo_errors;
+ ++dev->stats.tx_fifo_errors;
sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_FU);
}
}
sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_CLR_IRQ_CHK);
}
-/* Check for lost IRQ once a second */
+static int sky2_rx_hung(struct net_device *dev)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
+ unsigned port = sky2->port;
+ unsigned rxq = rxqaddr[port];
+ u32 mac_rp = sky2_read32(hw, SK_REG(port, RX_GMF_RP));
+ u8 mac_lev = sky2_read8(hw, SK_REG(port, RX_GMF_RLEV));
+ u8 fifo_rp = sky2_read8(hw, Q_ADDR(rxq, Q_RP));
+ u8 fifo_lev = sky2_read8(hw, Q_ADDR(rxq, Q_RL));
+
+ /* If idle and MAC or PCI is stuck */
+ if (sky2->check.last == dev->last_rx &&
+ ((mac_rp == sky2->check.mac_rp &&
+ mac_lev != 0 && mac_lev >= sky2->check.mac_lev) ||
+ /* Check if the PCI RX hang */
+ (fifo_rp == sky2->check.fifo_rp &&
+ fifo_lev != 0 && fifo_lev >= sky2->check.fifo_lev))) {
+ printk(KERN_DEBUG PFX "%s: hung mac %d:%d fifo %d (%d:%d)\n",
+ dev->name, mac_lev, mac_rp, fifo_lev, fifo_rp,
+ sky2_read8(hw, Q_ADDR(rxq, Q_WP)));
+ return 1;
+ } else {
+ sky2->check.last = dev->last_rx;
+ sky2->check.mac_rp = mac_rp;
+ sky2->check.mac_lev = mac_lev;
+ sky2->check.fifo_rp = fifo_rp;
+ sky2->check.fifo_lev = fifo_lev;
+ return 0;
+ }
+}
+
static void sky2_watchdog(unsigned long arg)
{
struct sky2_hw *hw = (struct sky2_hw *) arg;
+ /* Check for lost IRQ once a second */
if (sky2_read32(hw, B0_ISRC)) {
- struct net_device *dev = hw->dev[0];
+ napi_schedule(&hw->napi);
+ } else {
+ int i, active = 0;
- if (__netif_rx_schedule_prep(dev))
- __netif_rx_schedule(dev);
+ for (i = 0; i < hw->ports; i++) {
+ struct net_device *dev = hw->dev[i];
+ if (!netif_running(dev))
+ continue;
+ ++active;
+
+ /* For chips with Rx FIFO, check if stuck */
+ if ((hw->flags & SKY2_HW_RAM_BUFFER) &&
+ sky2_rx_hung(dev)) {
+ pr_info(PFX "%s: receiver hang detected\n",
+ dev->name);
+ schedule_work(&hw->restart_work);
+ return;
+ }
+ }
+
+ if (active == 0)
+ return;
}
- if (hw->active > 0)
- mod_timer(&hw->watchdog_timer, round_jiffies(jiffies + HZ));
+ mod_timer(&hw->watchdog_timer, round_jiffies(jiffies + HZ));
}
/* Hardware/software error handling */
sky2_le_error(hw, 1, Q_XA2, TX_RING_SIZE);
}
-static int sky2_poll(struct net_device *dev0, int *budget)
+static int sky2_poll(struct napi_struct *napi, int work_limit)
{
- struct sky2_hw *hw = ((struct sky2_port *) netdev_priv(dev0))->hw;
- int work_done;
+ struct sky2_hw *hw = container_of(napi, struct sky2_hw, napi);
u32 status = sky2_read32(hw, B0_Y2_SP_EISR);
+ int work_done = 0;
+ u16 idx;
if (unlikely(status & Y2_IS_ERROR))
sky2_err_intr(hw, status);
if (status & Y2_IS_IRQ_PHY2)
sky2_phy_intr(hw, 1);
- work_done = sky2_status_intr(hw, min(dev0->quota, *budget));
- *budget -= work_done;
- dev0->quota -= work_done;
+ while ((idx = sky2_read16(hw, STAT_PUT_IDX)) != hw->st_idx) {
+ work_done += sky2_status_intr(hw, work_limit - work_done, idx);
- /* More work? */
- if (hw->st_idx != sky2_read16(hw, STAT_PUT_IDX))
- return 1;
+ if (work_done >= work_limit)
+ goto done;
+ }
/* Bug/Errata workaround?
* Need to kick the TX irq moderation timer.
sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP);
sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
}
- netif_rx_complete(dev0);
-
+ napi_complete(napi);
sky2_read32(hw, B0_Y2_SP_LISR);
- return 0;
+done:
+
+ return work_done;
}
static irqreturn_t sky2_intr(int irq, void *dev_id)
{
struct sky2_hw *hw = dev_id;
- struct net_device *dev0 = hw->dev[0];
u32 status;
/* Reading this mask interrupts as side effect */
return IRQ_NONE;
prefetch(&hw->st_le[hw->st_idx]);
- if (likely(__netif_rx_schedule_prep(dev0)))
- __netif_rx_schedule(dev0);
+
+ napi_schedule(&hw->napi);
return IRQ_HANDLED;
}
static void sky2_netpoll(struct net_device *dev)
{
struct sky2_port *sky2 = netdev_priv(dev);
- struct net_device *dev0 = sky2->hw->dev[0];
- if (netif_running(dev) && __netif_rx_schedule_prep(dev0))
- __netif_rx_schedule(dev0);
+ napi_schedule(&sky2->hw->napi);
}
#endif
/* Chip internal frequency for clock calculations */
-static inline u32 sky2_mhz(const struct sky2_hw *hw)
+static u32 sky2_mhz(const struct sky2_hw *hw)
{
switch (hw->chip_id) {
case CHIP_ID_YUKON_EC:
case CHIP_ID_YUKON_EC_U:
case CHIP_ID_YUKON_EX:
- return 125; /* 125 Mhz */
+ case CHIP_ID_YUKON_SUPR:
+ case CHIP_ID_YUKON_UL_2:
+ return 125;
+
case CHIP_ID_YUKON_FE:
- return 100; /* 100 Mhz */
- default: /* YUKON_XL */
- return 156; /* 156 Mhz */
+ return 100;
+
+ case CHIP_ID_YUKON_FE_P:
+ return 50;
+
+ case CHIP_ID_YUKON_XL:
+ return 156;
+
+ default:
+ BUG();
}
}
{
u8 t8;
- /* Enable all clocks */
+ /* Enable all clocks and check for bad PCI access */
sky2_pci_write32(hw, PCI_DEV_REG3, 0);
sky2_write8(hw, B0_CTST, CS_RST_CLR);
hw->chip_id = sky2_read8(hw, B2_CHIP_ID);
- if (hw->chip_id < CHIP_ID_YUKON_XL || hw->chip_id > CHIP_ID_YUKON_FE) {
- dev_err(&hw->pdev->dev, "unsupported chip type 0x%x\n",
- hw->chip_id);
- return -EOPNOTSUPP;
- }
-
hw->chip_rev = (sky2_read8(hw, B2_MAC_CFG) & CFG_CHIP_R_MSK) >> 4;
- /* This rev is really old, and requires untested workarounds */
- if (hw->chip_id == CHIP_ID_YUKON_EC && hw->chip_rev == CHIP_REV_YU_EC_A1) {
- dev_err(&hw->pdev->dev, "unsupported revision Yukon-%s (0x%x) rev %d\n",
- yukon2_name[hw->chip_id - CHIP_ID_YUKON_XL],
- hw->chip_id, hw->chip_rev);
+ switch(hw->chip_id) {
+ case CHIP_ID_YUKON_XL:
+ hw->flags = SKY2_HW_GIGABIT | SKY2_HW_NEWER_PHY;
+ break;
+
+ case CHIP_ID_YUKON_EC_U:
+ hw->flags = SKY2_HW_GIGABIT
+ | SKY2_HW_NEWER_PHY
+ | SKY2_HW_ADV_POWER_CTL;
+ break;
+
+ case CHIP_ID_YUKON_EX:
+ hw->flags = SKY2_HW_GIGABIT
+ | SKY2_HW_NEWER_PHY
+ | SKY2_HW_NEW_LE
+ | SKY2_HW_ADV_POWER_CTL;
+
+ /* New transmit checksum */
+ if (hw->chip_rev != CHIP_REV_YU_EX_B0)
+ hw->flags |= SKY2_HW_AUTO_TX_SUM;
+ break;
+
+ case CHIP_ID_YUKON_EC:
+ /* This rev is really old, and requires untested workarounds */
+ if (hw->chip_rev == CHIP_REV_YU_EC_A1) {
+ dev_err(&hw->pdev->dev, "unsupported revision Yukon-EC rev A1\n");
+ return -EOPNOTSUPP;
+ }
+ hw->flags = SKY2_HW_GIGABIT;
+ break;
+
+ case CHIP_ID_YUKON_FE:
+ break;
+
+ case CHIP_ID_YUKON_FE_P:
+ hw->flags = SKY2_HW_NEWER_PHY
+ | SKY2_HW_NEW_LE
+ | SKY2_HW_AUTO_TX_SUM
+ | SKY2_HW_ADV_POWER_CTL;
+ break;
+
+ case CHIP_ID_YUKON_SUPR:
+ hw->flags = SKY2_HW_GIGABIT
+ | SKY2_HW_NEWER_PHY
+ | SKY2_HW_NEW_LE
+ | SKY2_HW_AUTO_TX_SUM
+ | SKY2_HW_ADV_POWER_CTL;
+ break;
+
+ case CHIP_ID_YUKON_UL_2:
+ hw->flags = SKY2_HW_GIGABIT
+ | SKY2_HW_ADV_POWER_CTL;
+ break;
+
+ default:
+ dev_err(&hw->pdev->dev, "unsupported chip type 0x%x\n",
+ hw->chip_id);
return -EOPNOTSUPP;
}
hw->pmd_type = sky2_read8(hw, B2_PMD_TYP);
+ if (hw->pmd_type == 'L' || hw->pmd_type == 'S' || hw->pmd_type == 'P')
+ hw->flags |= SKY2_HW_FIBRE_PHY;
+
hw->ports = 1;
t8 = sky2_read8(hw, B2_Y2_HW_RES);
if ((t8 & CFG_DUAL_MAC_MSK) == CFG_DUAL_MAC_MSK) {
static void sky2_reset(struct sky2_hw *hw)
{
+ struct pci_dev *pdev = hw->pdev;
u16 status;
- int i;
+ int i, cap;
+ u32 hwe_mask = Y2_HWE_ALL_MASK;
/* disable ASF */
if (hw->chip_id == CHIP_ID_YUKON_EX) {
sky2_write8(hw, B0_CTST, CS_RST_SET);
sky2_write8(hw, B0_CTST, CS_RST_CLR);
- /* clear PCI errors, if any */
- status = sky2_pci_read16(hw, PCI_STATUS);
-
+ /* allow writes to PCI config */
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
- sky2_pci_write16(hw, PCI_STATUS, status | PCI_STATUS_ERROR_BITS);
+ /* clear PCI errors, if any */
+ status = sky2_pci_read16(hw, PCI_STATUS);
+ status |= PCI_STATUS_ERROR_BITS;
+ sky2_pci_write16(hw, PCI_STATUS, status);
sky2_write8(hw, B0_CTST, CS_MRST_CLR);
- /* clear any PEX errors */
- if (pci_find_capability(hw->pdev, PCI_CAP_ID_EXP))
- sky2_pci_write32(hw, PEX_UNC_ERR_STAT, 0xffffffffUL);
+ cap = pci_find_capability(pdev, PCI_CAP_ID_EXP);
+ if (cap) {
+ sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
+ 0xfffffffful);
+ /* If error bit is stuck on ignore it */
+ if (sky2_read32(hw, B0_HWE_ISRC) & Y2_IS_PCI_EXP)
+ dev_info(&pdev->dev, "ignoring stuck error report bit\n");
+ else
+ hwe_mask |= Y2_IS_PCI_EXP;
+ }
sky2_power_on(hw);
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
for (i = 0; i < hw->ports; i++) {
sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET);
sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_CLR);
- if (hw->chip_id == CHIP_ID_YUKON_EX)
+ if (hw->chip_id == CHIP_ID_YUKON_EX ||
+ hw->chip_id == CHIP_ID_YUKON_SUPR)
sky2_write16(hw, SK_REG(i, GMAC_CTRL),
GMC_BYP_MACSECRX_ON | GMC_BYP_MACSECTX_ON
| GMC_BYP_RETR_ON);
}
- sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
-
/* Clear I2C IRQ noise */
sky2_write32(hw, B2_I2C_IRQ, 1);
sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XS2), SK_RI_TO_53);
}
- sky2_write32(hw, B0_HWE_IMSK, Y2_HWE_ALL_MASK);
+ sky2_write32(hw, B0_HWE_IMSK, hwe_mask);
for (i = 0; i < hw->ports; i++)
sky2_gmac_reset(hw, i);
int i, err;
rtnl_lock();
- sky2_write32(hw, B0_IMSK, 0);
- sky2_read32(hw, B0_IMSK);
-
- netif_poll_disable(hw->dev[0]);
-
for (i = 0; i < hw->ports; i++) {
dev = hw->dev[i];
if (netif_running(dev))
sky2_down(dev);
}
+ napi_disable(&hw->napi);
+ sky2_write32(hw, B0_IMSK, 0);
sky2_reset(hw);
sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
- netif_poll_enable(hw->dev[0]);
+ napi_enable(&hw->napi);
for (i = 0; i < hw->ports; i++) {
dev = hw->dev[i];
struct sky2_port *sky2 = netdev_priv(dev);
struct sky2_hw *hw = sky2->hw;
- if (wol->wolopts & ~sky2_wol_supported(sky2->hw))
+ if ((wol->wolopts & ~sky2_wol_supported(sky2->hw))
+ || !device_can_wakeup(&hw->pdev->dev))
return -EOPNOTSUPP;
sky2->wol = wol->wolopts;
- if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX)
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U ||
+ hw->chip_id == CHIP_ID_YUKON_EX ||
+ hw->chip_id == CHIP_ID_YUKON_FE_P)
sky2_write32(hw, B0_CTST, sky2->wol
? Y2_HW_WOL_ON : Y2_HW_WOL_OFF);
+ device_set_wakeup_enable(&hw->pdev->dev, sky2->wol);
+
if (!netif_running(dev))
sky2_wol_init(sky2);
return 0;
| SUPPORTED_100baseT_Full
| SUPPORTED_Autoneg | SUPPORTED_TP;
- if (hw->chip_id != CHIP_ID_YUKON_FE)
+ if (hw->flags & SKY2_HW_GIGABIT)
modes |= SUPPORTED_1000baseT_Half
| SUPPORTED_1000baseT_Full;
return modes;
ecmd->supported = sky2_supported_modes(hw);
ecmd->phy_address = PHY_ADDR_MARV;
if (sky2_is_copper(hw)) {
- ecmd->supported = SUPPORTED_10baseT_Half
- | SUPPORTED_10baseT_Full
- | SUPPORTED_100baseT_Half
- | SUPPORTED_100baseT_Full
- | SUPPORTED_1000baseT_Half
- | SUPPORTED_1000baseT_Full
- | SUPPORTED_Autoneg | SUPPORTED_TP;
ecmd->port = PORT_TP;
ecmd->speed = sky2->speed;
} else {
sky2->msg_enable = value;
}
-static int sky2_get_stats_count(struct net_device *dev)
+static int sky2_get_sset_count(struct net_device *dev, int sset)
{
- return ARRAY_SIZE(sky2_stats);
+ switch (sset) {
+ case ETH_SS_STATS:
+ return ARRAY_SIZE(sky2_stats);
+ default:
+ return -EOPNOTSUPP;
+ }
}
static void sky2_get_ethtool_stats(struct net_device *dev,
}
}
-static struct net_device_stats *sky2_get_stats(struct net_device *dev)
-{
- struct sky2_port *sky2 = netdev_priv(dev);
- return &sky2->net_stats;
-}
-
static int sky2_set_mac_address(struct net_device *dev, void *p)
{
struct sky2_port *sky2 = netdev_priv(dev);
/* Can have one global because blinking is controlled by
* ethtool and that is always under RTNL mutex
*/
-static void sky2_led(struct sky2_hw *hw, unsigned port, int on)
+static void sky2_led(struct sky2_port *sky2, enum led_mode mode)
{
- u16 pg;
+ struct sky2_hw *hw = sky2->hw;
+ unsigned port = sky2->port;
- switch (hw->chip_id) {
- case CHIP_ID_YUKON_XL:
+ spin_lock_bh(&sky2->phy_lock);
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U ||
+ hw->chip_id == CHIP_ID_YUKON_EX ||
+ hw->chip_id == CHIP_ID_YUKON_SUPR) {
+ u16 pg;
pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
- gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
- on ? (PHY_M_LEDC_LOS_CTRL(1) |
- PHY_M_LEDC_INIT_CTRL(7) |
- PHY_M_LEDC_STA1_CTRL(7) |
- PHY_M_LEDC_STA0_CTRL(7))
- : 0);
+
+ switch (mode) {
+ case MO_LED_OFF:
+ gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
+ PHY_M_LEDC_LOS_CTRL(8) |
+ PHY_M_LEDC_INIT_CTRL(8) |
+ PHY_M_LEDC_STA1_CTRL(8) |
+ PHY_M_LEDC_STA0_CTRL(8));
+ break;
+ case MO_LED_ON:
+ gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
+ PHY_M_LEDC_LOS_CTRL(9) |
+ PHY_M_LEDC_INIT_CTRL(9) |
+ PHY_M_LEDC_STA1_CTRL(9) |
+ PHY_M_LEDC_STA0_CTRL(9));
+ break;
+ case MO_LED_BLINK:
+ gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
+ PHY_M_LEDC_LOS_CTRL(0xa) |
+ PHY_M_LEDC_INIT_CTRL(0xa) |
+ PHY_M_LEDC_STA1_CTRL(0xa) |
+ PHY_M_LEDC_STA0_CTRL(0xa));
+ break;
+ case MO_LED_NORM:
+ gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
+ PHY_M_LEDC_LOS_CTRL(1) |
+ PHY_M_LEDC_INIT_CTRL(8) |
+ PHY_M_LEDC_STA1_CTRL(7) |
+ PHY_M_LEDC_STA0_CTRL(7));
+ }
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
- break;
+ } else
+ gm_phy_write(hw, port, PHY_MARV_LED_OVER,
+ PHY_M_LED_MO_DUP(mode) |
+ PHY_M_LED_MO_10(mode) |
+ PHY_M_LED_MO_100(mode) |
+ PHY_M_LED_MO_1000(mode) |
+ PHY_M_LED_MO_RX(mode) |
+ PHY_M_LED_MO_TX(mode));
- default:
- gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
- gm_phy_write(hw, port, PHY_MARV_LED_OVER,
- on ? PHY_M_LED_ALL : 0);
- }
+ spin_unlock_bh(&sky2->phy_lock);
}
/* blink LED's for finding board */
static int sky2_phys_id(struct net_device *dev, u32 data)
{
struct sky2_port *sky2 = netdev_priv(dev);
- struct sky2_hw *hw = sky2->hw;
- unsigned port = sky2->port;
- u16 ledctrl, ledover = 0;
- long ms;
- int interrupted;
- int onoff = 1;
-
- if (!data || data > (u32) (MAX_SCHEDULE_TIMEOUT / HZ))
- ms = jiffies_to_msecs(MAX_SCHEDULE_TIMEOUT);
- else
- ms = data * 1000;
-
- /* save initial values */
- spin_lock_bh(&sky2->phy_lock);
- if (hw->chip_id == CHIP_ID_YUKON_XL) {
- u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
- gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
- ledctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
- gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
- } else {
- ledctrl = gm_phy_read(hw, port, PHY_MARV_LED_CTRL);
- ledover = gm_phy_read(hw, port, PHY_MARV_LED_OVER);
- }
+ unsigned int i;
- interrupted = 0;
- while (!interrupted && ms > 0) {
- sky2_led(hw, port, onoff);
- onoff = !onoff;
-
- spin_unlock_bh(&sky2->phy_lock);
- interrupted = msleep_interruptible(250);
- spin_lock_bh(&sky2->phy_lock);
+ if (data == 0)
+ data = UINT_MAX;
- ms -= 250;
- }
-
- /* resume regularly scheduled programming */
- if (hw->chip_id == CHIP_ID_YUKON_XL) {
- u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
- gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
- gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ledctrl);
- gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
- } else {
- gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
- gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
+ for (i = 0; i < data; i++) {
+ sky2_led(sky2, MO_LED_ON);
+ if (msleep_interruptible(500))
+ break;
+ sky2_led(sky2, MO_LED_OFF);
+ if (msleep_interruptible(500))
+ break;
}
- spin_unlock_bh(&sky2->phy_lock);
+ sky2_led(sky2, MO_LED_NORM);
return 0;
}
err = sky2_up(dev);
if (err)
dev_close(dev);
- else
- sky2_set_multicast(dev);
}
return err;
{
const struct sky2_port *sky2 = netdev_priv(dev);
const void __iomem *io = sky2->hw->regs;
+ unsigned int b;
regs->version = 1;
- memset(p, 0, regs->len);
-
- memcpy_fromio(p, io, B3_RAM_ADDR);
- /* skip diagnostic ram region */
- memcpy_fromio(p + B3_RI_WTO_R1, io + B3_RI_WTO_R1, 0x2000 - B3_RI_WTO_R1);
+ for (b = 0; b < 128; b++) {
+ /* This complicated switch statement is to make sure and
+ * only access regions that are unreserved.
+ * Some blocks are only valid on dual port cards.
+ * and block 3 has some special diagnostic registers that
+ * are poison.
+ */
+ switch (b) {
+ case 3:
+ /* skip diagnostic ram region */
+ memcpy_fromio(p + 0x10, io + 0x10, 128 - 0x10);
+ break;
- /* copy GMAC registers */
- memcpy_fromio(p + BASE_GMAC_1, io + BASE_GMAC_1, 0x1000);
- if (sky2->hw->ports > 1)
- memcpy_fromio(p + BASE_GMAC_2, io + BASE_GMAC_2, 0x1000);
+ /* dual port cards only */
+ case 5: /* Tx Arbiter 2 */
+ case 9: /* RX2 */
+ case 14 ... 15: /* TX2 */
+ case 17: case 19: /* Ram Buffer 2 */
+ case 22 ... 23: /* Tx Ram Buffer 2 */
+ case 25: /* Rx MAC Fifo 1 */
+ case 27: /* Tx MAC Fifo 2 */
+ case 31: /* GPHY 2 */
+ case 40 ... 47: /* Pattern Ram 2 */
+ case 52: case 54: /* TCP Segmentation 2 */
+ case 112 ... 116: /* GMAC 2 */
+ if (sky2->hw->ports == 1)
+ goto reserved;
+ /* fall through */
+ case 0: /* Control */
+ case 2: /* Mac address */
+ case 4: /* Tx Arbiter 1 */
+ case 7: /* PCI express reg */
+ case 8: /* RX1 */
+ case 12 ... 13: /* TX1 */
+ case 16: case 18:/* Rx Ram Buffer 1 */
+ case 20 ... 21: /* Tx Ram Buffer 1 */
+ case 24: /* Rx MAC Fifo 1 */
+ case 26: /* Tx MAC Fifo 1 */
+ case 28 ... 29: /* Descriptor and status unit */
+ case 30: /* GPHY 1*/
+ case 32 ... 39: /* Pattern Ram 1 */
+ case 48: case 50: /* TCP Segmentation 1 */
+ case 56 ... 60: /* PCI space */
+ case 80 ... 84: /* GMAC 1 */
+ memcpy_fromio(p, io, 128);
+ break;
+ default:
+reserved:
+ memset(p, 0, 128);
+ }
+ p += 128;
+ io += 128;
+ }
}
/* In order to do Jumbo packets on these chips, need to turn off the
static int sky2_get_eeprom_len(struct net_device *dev)
{
struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
u16 reg2;
- reg2 = sky2_pci_read32(sky2->hw, PCI_DEV_REG2);
+ reg2 = sky2_pci_read16(hw, PCI_DEV_REG2);
return 1 << ( ((reg2 & PCI_VPD_ROM_SZ) >> 14) + 8);
}
-static u32 sky2_vpd_read(struct sky2_hw *hw, int cap, u16 offset)
+static int sky2_vpd_wait(const struct sky2_hw *hw, int cap, u16 busy)
{
- sky2_pci_write16(hw, cap + PCI_VPD_ADDR, offset);
+ unsigned long start = jiffies;
- while (!(sky2_pci_read16(hw, cap + PCI_VPD_ADDR) & PCI_VPD_ADDR_F))
- cpu_relax();
- return sky2_pci_read32(hw, cap + PCI_VPD_DATA);
+ while ( (sky2_pci_read16(hw, cap + PCI_VPD_ADDR) & PCI_VPD_ADDR_F) == busy) {
+ /* Can take up to 10.6 ms for write */
+ if (time_after(jiffies, start + HZ/4)) {
+ dev_err(&hw->pdev->dev, PFX "VPD cycle timed out");
+ return -ETIMEDOUT;
+ }
+ mdelay(1);
+ }
+
+ return 0;
}
-static void sky2_vpd_write(struct sky2_hw *hw, int cap, u16 offset, u32 val)
+static int sky2_vpd_read(struct sky2_hw *hw, int cap, void *data,
+ u16 offset, size_t length)
{
- sky2_pci_write32(hw, cap + PCI_VPD_DATA, val);
- sky2_pci_write16(hw, cap + PCI_VPD_ADDR, offset | PCI_VPD_ADDR_F);
- do {
- cpu_relax();
- } while (sky2_pci_read16(hw, cap + PCI_VPD_ADDR) & PCI_VPD_ADDR_F);
+ int rc = 0;
+
+ while (length > 0) {
+ u32 val;
+
+ sky2_pci_write16(hw, cap + PCI_VPD_ADDR, offset);
+ rc = sky2_vpd_wait(hw, cap, 0);
+ if (rc)
+ break;
+
+ val = sky2_pci_read32(hw, cap + PCI_VPD_DATA);
+
+ memcpy(data, &val, min(sizeof(val), length));
+ offset += sizeof(u32);
+ data += sizeof(u32);
+ length -= sizeof(u32);
+ }
+
+ return rc;
+}
+
+static int sky2_vpd_write(struct sky2_hw *hw, int cap, const void *data,
+ u16 offset, unsigned int length)
+{
+ unsigned int i;
+ int rc = 0;
+
+ for (i = 0; i < length; i += sizeof(u32)) {
+ u32 val = *(u32 *)(data + i);
+
+ sky2_pci_write32(hw, cap + PCI_VPD_DATA, val);
+ sky2_pci_write32(hw, cap + PCI_VPD_ADDR, offset | PCI_VPD_ADDR_F);
+
+ rc = sky2_vpd_wait(hw, cap, PCI_VPD_ADDR_F);
+ if (rc)
+ break;
+ }
+ return rc;
}
static int sky2_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
{
struct sky2_port *sky2 = netdev_priv(dev);
int cap = pci_find_capability(sky2->hw->pdev, PCI_CAP_ID_VPD);
- int length = eeprom->len;
- u16 offset = eeprom->offset;
if (!cap)
return -EINVAL;
eeprom->magic = SKY2_EEPROM_MAGIC;
- while (length > 0) {
- u32 val = sky2_vpd_read(sky2->hw, cap, offset);
- int n = min_t(int, length, sizeof(val));
-
- memcpy(data, &val, n);
- length -= n;
- data += n;
- offset += n;
- }
- return 0;
+ return sky2_vpd_read(sky2->hw, cap, data, eeprom->offset, eeprom->len);
}
static int sky2_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
{
struct sky2_port *sky2 = netdev_priv(dev);
int cap = pci_find_capability(sky2->hw->pdev, PCI_CAP_ID_VPD);
- int length = eeprom->len;
- u16 offset = eeprom->offset;
if (!cap)
return -EINVAL;
if (eeprom->magic != SKY2_EEPROM_MAGIC)
return -EINVAL;
- while (length > 0) {
- u32 val;
- int n = min_t(int, length, sizeof(val));
-
- if (n < sizeof(val))
- val = sky2_vpd_read(sky2->hw, cap, offset);
- memcpy(&val, data, n);
-
- sky2_vpd_write(sky2->hw, cap, offset, val);
+ /* Partial writes not supported */
+ if ((eeprom->offset & 3) || (eeprom->len & 3))
+ return -EINVAL;
- length -= n;
- data += n;
- offset += n;
- }
- return 0;
+ return sky2_vpd_write(sky2->hw, cap, data, eeprom->offset, eeprom->len);
}
.get_eeprom_len = sky2_get_eeprom_len,
.get_eeprom = sky2_get_eeprom,
.set_eeprom = sky2_set_eeprom,
- .get_sg = ethtool_op_get_sg,
.set_sg = ethtool_op_set_sg,
- .get_tx_csum = ethtool_op_get_tx_csum,
.set_tx_csum = sky2_set_tx_csum,
- .get_tso = ethtool_op_get_tso,
.set_tso = sky2_set_tso,
.get_rx_csum = sky2_get_rx_csum,
.set_rx_csum = sky2_set_rx_csum,
.get_pauseparam = sky2_get_pauseparam,
.set_pauseparam = sky2_set_pauseparam,
.phys_id = sky2_phys_id,
- .get_stats_count = sky2_get_stats_count,
+ .get_sset_count = sky2_get_sset_count,
.get_ethtool_stats = sky2_get_ethtool_stats,
};
{
struct net_device *dev = seq->private;
const struct sky2_port *sky2 = netdev_priv(dev);
- const struct sky2_hw *hw = sky2->hw;
+ struct sky2_hw *hw = sky2->hw;
unsigned port = sky2->port;
unsigned idx, last;
int sop;
sky2_read32(hw, B0_IMSK),
sky2_read32(hw, B0_Y2_SP_ICR));
- netif_poll_disable(hw->dev[0]);
+ napi_disable(&hw->napi);
last = sky2_read16(hw, STAT_PUT_IDX);
if (hw->st_idx == last)
last = sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_PUT_IDX)),
sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_LAST_IDX)));
- netif_poll_enable(hw->dev[0]);
+ sky2_read32(hw, B0_Y2_SP_LISR);
+ napi_enable(&hw->napi);
return 0;
}
unsigned long event, void *ptr)
{
struct net_device *dev = ptr;
+ struct sky2_port *sky2 = netdev_priv(dev);
- if (dev->open == sky2_up) {
- struct sky2_port *sky2 = netdev_priv(dev);
+ if (dev->open != sky2_up || !sky2_debug)
+ return NOTIFY_DONE;
- switch(event) {
- case NETDEV_CHANGENAME:
- if (!netif_running(dev))
- break;
- /* fallthrough */
- case NETDEV_DOWN:
- case NETDEV_GOING_DOWN:
- if (sky2->debugfs) {
- printk(KERN_DEBUG PFX "%s: remove debugfs\n",
- dev->name);
- debugfs_remove(sky2->debugfs);
- sky2->debugfs = NULL;
- }
+ switch(event) {
+ case NETDEV_CHANGENAME:
+ if (sky2->debugfs) {
+ sky2->debugfs = debugfs_rename(sky2_debug, sky2->debugfs,
+ sky2_debug, dev->name);
+ }
+ break;
- if (event != NETDEV_CHANGENAME)
- break;
- /* fallthrough for changename */
- case NETDEV_UP:
- if (sky2_debug) {
- struct dentry *d;
- d = debugfs_create_file(dev->name, S_IRUGO,
- sky2_debug, dev,
- &sky2_debug_fops);
- if (d == NULL || IS_ERR(d))
- printk(KERN_INFO PFX
- "%s: debugfs create failed\n",
- dev->name);
- else
- sky2->debugfs = d;
- }
- break;
+ case NETDEV_GOING_DOWN:
+ if (sky2->debugfs) {
+ printk(KERN_DEBUG PFX "%s: remove debugfs\n",
+ dev->name);
+ debugfs_remove(sky2->debugfs);
+ sky2->debugfs = NULL;
}
+ break;
+
+ case NETDEV_UP:
+ sky2->debugfs = debugfs_create_file(dev->name, S_IRUGO,
+ sky2_debug, dev,
+ &sky2_debug_fops);
+ if (IS_ERR(sky2->debugfs))
+ sky2->debugfs = NULL;
}
return NOTIFY_DONE;
struct net_device *dev = alloc_etherdev(sizeof(*sky2));
if (!dev) {
- dev_err(&hw->pdev->dev, "etherdev alloc failed");
+ dev_err(&hw->pdev->dev, "etherdev alloc failed\n");
return NULL;
}
- SET_MODULE_OWNER(dev);
SET_NETDEV_DEV(dev, &hw->pdev->dev);
dev->irq = hw->pdev->irq;
dev->open = sky2_up;
dev->stop = sky2_down;
dev->do_ioctl = sky2_ioctl;
dev->hard_start_xmit = sky2_xmit_frame;
- dev->get_stats = sky2_get_stats;
dev->set_multicast_list = sky2_set_multicast;
dev->set_mac_address = sky2_set_mac_address;
dev->change_mtu = sky2_change_mtu;
SET_ETHTOOL_OPS(dev, &sky2_ethtool_ops);
dev->tx_timeout = sky2_tx_timeout;
dev->watchdog_timeo = TX_WATCHDOG;
- if (port == 0)
- dev->poll = sky2_poll;
- dev->weight = NAPI_WEIGHT;
#ifdef CONFIG_NET_POLL_CONTROLLER
- /* Network console (only works on port 0)
- * because netpoll makes assumptions about NAPI
- */
if (port == 0)
dev->poll_controller = sky2_netpoll;
#endif
sky2->duplex = -1;
sky2->speed = -1;
sky2->advertising = sky2_supported_modes(hw);
- sky2->rx_csum = 1;
+ sky2->rx_csum = (hw->chip_id != CHIP_ID_YUKON_XL);
sky2->wol = wol;
spin_lock_init(&sky2->phy_lock);
dev->features |= NETIF_F_HIGHDMA;
#ifdef SKY2_VLAN_TAG_USED
- dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
- dev->vlan_rx_register = sky2_vlan_rx_register;
+ /* The workaround for FE+ status conflicts with VLAN tag detection. */
+ if (!(sky2->hw->chip_id == CHIP_ID_YUKON_FE_P &&
+ sky2->hw->chip_rev == CHIP_REV_YU_FE2_A0)) {
+ dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+ dev->vlan_rx_register = sky2_vlan_rx_register;
+ }
#endif
/* read the mac address */
static void __devinit sky2_show_addr(struct net_device *dev)
{
const struct sky2_port *sky2 = netdev_priv(dev);
+ DECLARE_MAC_BUF(mac);
if (netif_msg_probe(sky2))
- printk(KERN_INFO PFX "%s: addr %02x:%02x:%02x:%02x:%02x:%02x\n",
- dev->name,
- dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
- dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
+ printk(KERN_INFO PFX "%s: addr %s\n",
+ dev->name, print_mac(mac, dev->dev_addr));
}
/* Handle software interrupt used during MSI test */
return IRQ_NONE;
if (status & Y2_IS_IRQ_SW) {
- hw->msi = 1;
+ hw->flags |= SKY2_HW_USE_MSI;
wake_up(&hw->msi_wait);
sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
}
sky2_write8(hw, B0_CTST, CS_ST_SW_IRQ);
sky2_read8(hw, B0_CTST);
- wait_event_timeout(hw->msi_wait, hw->msi, HZ/10);
+ wait_event_timeout(hw->msi_wait, (hw->flags & SKY2_HW_USE_MSI), HZ/10);
- if (!hw->msi) {
+ if (!(hw->flags & SKY2_HW_USE_MSI)) {
/* MSI test failed, go back to INTx mode */
dev_info(&pdev->dev, "No interrupt generated using MSI, "
"switching to INTx mode.\n");
return err;
}
-static int __devinit pci_wake_enabled(struct pci_dev *dev)
+/*
+ * Read and parse the first part of Vital Product Data
+ */
+#define VPD_SIZE 128
+#define VPD_MAGIC 0x82
+
+static void __devinit sky2_vpd_info(struct sky2_hw *hw)
{
- int pm = pci_find_capability(dev, PCI_CAP_ID_PM);
- u16 value;
+ int cap = pci_find_capability(hw->pdev, PCI_CAP_ID_VPD);
+ const u8 *p;
+ u8 *vpd_buf = NULL;
+ u16 len;
+ static struct vpd_tag {
+ char tag[2];
+ char *label;
+ } vpd_tags[] = {
+ { "PN", "Part Number" },
+ { "EC", "Engineering Level" },
+ { "MN", "Manufacturer" },
+ };
- if (!pm)
- return 0;
- if (pci_read_config_word(dev, pm + PCI_PM_CTRL, &value))
- return 0;
- return value & PCI_PM_CTRL_PME_ENABLE;
+ if (!cap)
+ goto out;
+
+ vpd_buf = kmalloc(VPD_SIZE, GFP_KERNEL);
+ if (!vpd_buf)
+ goto out;
+
+ if (sky2_vpd_read(hw, cap, vpd_buf, 0, VPD_SIZE))
+ goto out;
+
+ if (vpd_buf[0] != VPD_MAGIC)
+ goto out;
+ len = vpd_buf[1];
+ if (len == 0 || len > VPD_SIZE - 4)
+ goto out;
+ p = vpd_buf + 3;
+ dev_info(&hw->pdev->dev, "%.*s\n", len, p);
+ p += len;
+
+ while (p < vpd_buf + VPD_SIZE - 4) {
+ int i;
+
+ if (!memcmp("RW", p, 2)) /* end marker */
+ break;
+
+ len = p[2];
+ if (len > (p - vpd_buf) - 4)
+ break;
+
+ for (i = 0; i < ARRAY_SIZE(vpd_tags); i++) {
+ if (!memcmp(vpd_tags[i].tag, p, 2)) {
+ printk(KERN_DEBUG " %s: %.*s\n",
+ vpd_tags[i].label, len, p + 3);
+ break;
+ }
+ }
+ p += len + 3;
+ }
+out:
+ kfree(vpd_buf);
+}
+
+/* This driver supports yukon2 chipset only */
+static const char *sky2_name(u8 chipid, char *buf, int sz)
+{
+ const char *name[] = {
+ "XL", /* 0xb3 */
+ "EC Ultra", /* 0xb4 */
+ "Extreme", /* 0xb5 */
+ "EC", /* 0xb6 */
+ "FE", /* 0xb7 */
+ "FE+", /* 0xb8 */
+ "Supreme", /* 0xb9 */
+ "UL 2", /* 0xba */
+ };
+
+ if (chipid >= CHIP_ID_YUKON_XL && chipid < CHIP_ID_YUKON_UL_2)
+ strncpy(buf, name[chipid - CHIP_ID_YUKON_XL], sz);
+ else
+ snprintf(buf, sz, "(chip %#x)", chipid);
+ return buf;
}
static int __devinit sky2_probe(struct pci_dev *pdev,
struct net_device *dev;
struct sky2_hw *hw;
int err, using_dac = 0, wol_default;
+ char buf1[16];
err = pci_enable_device(pdev);
if (err) {
}
}
- wol_default = pci_wake_enabled(pdev) ? WAKE_MAGIC : 0;
+ wol_default = device_may_wakeup(&pdev->dev) ? WAKE_MAGIC : 0;
err = -ENOMEM;
hw = kzalloc(sizeof(*hw), GFP_KERNEL);
#endif
/* ring for status responses */
- hw->st_le = pci_alloc_consistent(hw->pdev, STATUS_LE_BYTES,
- &hw->st_dma);
+ hw->st_le = pci_alloc_consistent(pdev, STATUS_LE_BYTES, &hw->st_dma);
if (!hw->st_le)
goto err_out_iounmap;
if (err)
goto err_out_iounmap;
- dev_info(&pdev->dev, "v%s addr 0x%llx irq %d Yukon-%s (0x%x) rev %d\n",
- DRV_VERSION, (unsigned long long)pci_resource_start(pdev, 0),
- pdev->irq, yukon2_name[hw->chip_id - CHIP_ID_YUKON_XL],
- hw->chip_id, hw->chip_rev);
+ dev_info(&pdev->dev, "Yukon-2 %s chip revision %d\n",
+ sky2_name(hw->chip_id, buf1, sizeof(buf1)), hw->chip_rev);
sky2_reset(hw);
+ sky2_vpd_info(hw);
+
dev = sky2_init_netdev(hw, 0, using_dac, wol_default);
if (!dev) {
err = -ENOMEM;
goto err_out_free_netdev;
}
- err = request_irq(pdev->irq, sky2_intr, hw->msi ? 0 : IRQF_SHARED,
+ netif_napi_add(dev, &hw->napi, sky2_poll, NAPI_WEIGHT);
+
+ err = request_irq(pdev->irq, sky2_intr,
+ (hw->flags & SKY2_HW_USE_MSI) ? 0 : IRQF_SHARED,
dev->name, hw);
if (err) {
dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq);
goto err_out_unregister;
}
sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
+ napi_enable(&hw->napi);
sky2_show_addr(dev);
return 0;
err_out_unregister:
- if (hw->msi)
+ if (hw->flags & SKY2_HW_USE_MSI)
pci_disable_msi(pdev);
unregister_netdev(dev);
err_out_free_netdev:
free_netdev(dev);
err_out_free_pci:
sky2_write8(hw, B0_CTST, CS_RST_SET);
- pci_free_consistent(hw->pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma);
+ pci_free_consistent(pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma);
err_out_iounmap:
iounmap(hw->regs);
err_out_free_hw:
static void __devexit sky2_remove(struct pci_dev *pdev)
{
struct sky2_hw *hw = pci_get_drvdata(pdev);
- struct net_device *dev0, *dev1;
+ int i;
if (!hw)
return;
del_timer_sync(&hw->watchdog_timer);
+ cancel_work_sync(&hw->restart_work);
- flush_scheduled_work();
+ for (i = hw->ports-1; i >= 0; --i)
+ unregister_netdev(hw->dev[i]);
sky2_write32(hw, B0_IMSK, 0);
- synchronize_irq(hw->pdev->irq);
-
- dev0 = hw->dev[0];
- dev1 = hw->dev[1];
- if (dev1)
- unregister_netdev(dev1);
- unregister_netdev(dev0);
sky2_power_aux(hw);
sky2_read8(hw, B0_CTST);
free_irq(pdev->irq, hw);
- if (hw->msi)
+ if (hw->flags & SKY2_HW_USE_MSI)
pci_disable_msi(pdev);
pci_free_consistent(pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma);
pci_release_regions(pdev);
pci_disable_device(pdev);
- if (dev1)
- free_netdev(dev1);
- free_netdev(dev0);
+ for (i = hw->ports-1; i >= 0; --i)
+ free_netdev(hw->dev[i]);
+
iounmap(hw->regs);
kfree(hw);
if (!hw)
return 0;
- netif_poll_disable(hw->dev[0]);
+ del_timer_sync(&hw->watchdog_timer);
+ cancel_work_sync(&hw->restart_work);
for (i = 0; i < hw->ports; i++) {
struct net_device *dev = hw->dev[i];
struct sky2_port *sky2 = netdev_priv(dev);
+ netif_device_detach(dev);
if (netif_running(dev))
sky2_down(dev);
}
sky2_write32(hw, B0_IMSK, 0);
+ napi_disable(&hw->napi);
sky2_power_aux(hw);
pci_save_state(pdev);
pci_enable_wake(pdev, PCI_D0, 0);
/* Re-enable all clocks */
- if (hw->chip_id == CHIP_ID_YUKON_EX || hw->chip_id == CHIP_ID_YUKON_EC_U)
+ if (hw->chip_id == CHIP_ID_YUKON_EX ||
+ hw->chip_id == CHIP_ID_YUKON_EC_U ||
+ hw->chip_id == CHIP_ID_YUKON_FE_P)
sky2_pci_write32(hw, PCI_DEV_REG3, 0);
sky2_reset(hw);
-
sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
+ napi_enable(&hw->napi);
for (i = 0; i < hw->ports; i++) {
struct net_device *dev = hw->dev[i];
+
+ netif_device_attach(dev);
if (netif_running(dev)) {
err = sky2_up(dev);
if (err) {
printk(KERN_ERR PFX "%s: could not up: %d\n",
dev->name, err);
+ rtnl_lock();
dev_close(dev);
+ rtnl_unlock();
goto out;
}
-
- sky2_set_multicast(dev);
}
}
- netif_poll_enable(hw->dev[0]);
-
return 0;
out:
dev_err(&pdev->dev, "resume failed (%d)\n", err);
if (!hw)
return;
- netif_poll_disable(hw->dev[0]);
+ del_timer_sync(&hw->watchdog_timer);
for (i = 0; i < hw->ports; i++) {
struct net_device *dev = hw->dev[i];
pci_disable_device(pdev);
pci_set_power_state(pdev, PCI_D3hot);
-
}
static struct pci_driver sky2_driver = {
static int __init sky2_init_module(void)
{
+ pr_info(PFX "driver version " DRV_VERSION "\n");
+
sky2_debug_init();
return pci_register_driver(&sky2_driver);
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff