mwl8k: use integral index instead of pointer for driver_data

[safe/jmp/linux-2.6] / drivers / net / seeq8005.c

diff --git a/drivers/net/seeq8005.c b/drivers/net/seeq8005.c
index 8ef9402..39246d4 100644 (file)
--- a/drivers/net/seeq8005.c
+++ b/drivers/net/seeq8005.c
@@ -81,7 +81,8 @@ struct net_local {
 static int seeq8005_probe1(struct net_device *dev, int ioaddr);
 static int seeq8005_open(struct net_device *dev);
 static void seeq8005_timeout(struct net_device *dev);
-static int seeq8005_send_packet(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t seeq8005_send_packet(struct sk_buff *skb,
+                                       struct net_device *dev);
 static irqreturn_t seeq8005_interrupt(int irq, void *dev_id);
 static void seeq8005_rx(struct net_device *dev);
 static int seeq8005_close(struct net_device *dev);
@@ -143,6 +144,17 @@ out:
        return ERR_PTR(err);
 }
 
+static const struct net_device_ops seeq8005_netdev_ops = {
+       .ndo_open               = seeq8005_open,
+       .ndo_stop               = seeq8005_close,
+       .ndo_start_xmit         = seeq8005_send_packet,
+       .ndo_tx_timeout         = seeq8005_timeout,
+       .ndo_set_multicast_list = set_multicast_list,
+       .ndo_change_mtu         = eth_change_mtu,
+       .ndo_set_mac_address    = eth_mac_addr,
+       .ndo_validate_addr      = eth_validate_addr,
+};
+
 /* This is the real probe routine.  Linux has a history of friendly device
    probes on the ISA bus.  A good device probes avoids doing writes, and
    verifies that the correct device exists and functions.  */
@@ -301,7 +313,8 @@ static int __init seeq8005_probe1(struct net_device *dev, int ioaddr)
 
        /* Retrieve and print the ethernet address. */
        for (i = 0; i < 6; i++)
-               printk(" %2.2x", dev->dev_addr[i] = SA_prom[i+6]);
+               dev->dev_addr[i] = SA_prom[i+6];
+       printk("%pM", dev->dev_addr);
 
        if (dev->irq == 0xff)
                ;                       /* Do nothing: a user-level program will set it. */
@@ -331,12 +344,8 @@ static int __init seeq8005_probe1(struct net_device *dev, int ioaddr)
                 }
        }
 #endif
-       dev->open               = seeq8005_open;
-       dev->stop               = seeq8005_close;
-       dev->hard_start_xmit    = seeq8005_send_packet;
-       dev->tx_timeout         = seeq8005_timeout;
+       dev->netdev_ops = &seeq8005_netdev_ops;
        dev->watchdog_timeo     = HZ/20;
-       dev->set_multicast_list = set_multicast_list;
        dev->flags &= ~IFF_MULTICAST;
 
        return 0;
@@ -386,14 +395,15 @@ static void seeq8005_timeout(struct net_device *dev)
        netif_wake_queue(dev);
 }
 
-static int seeq8005_send_packet(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t seeq8005_send_packet(struct sk_buff *skb,
+                                       struct net_device *dev)
 {
        short length = skb->len;
        unsigned char *buf;
 
        if (length < ETH_ZLEN) {
                if (skb_padto(skb, ETH_ZLEN))
-                       return 0;
+                       return NETDEV_TX_OK;
                length = ETH_ZLEN;
        }
        buf = skb->data;
@@ -407,7 +417,7 @@ static int seeq8005_send_packet(struct sk_buff *skb, struct net_device *dev)
        dev_kfree_skb (skb);
        /* You might need to clean up and record Tx statistics here. */
 
-       return 0;
+       return NETDEV_TX_OK;
 }
 
 /*
@@ -562,7 +572,6 @@ static void seeq8005_rx(struct net_device *dev)
 
                        skb->protocol=eth_type_trans(skb,dev);
                        netif_rx(skb);
-                       dev->last_rx = jiffies;
                        dev->stats.rx_packets++;
                        dev->stats.rx_bytes += pkt_len;
                }
@@ -744,12 +753,3 @@ void __exit cleanup_module(void)
 }
 
 #endif /* MODULE */
-
-/*
- * Local variables:
- *  compile-command: "gcc -D__KERNEL__ -I/usr/src/linux/net/inet -Wall -Wstrict-prototypes -O6 -m486 -c skeleton.c"
- *  version-control: t
- *  kept-new-versions: 5
- *  tab-width: 4
- * End:
- */