return;
RTL_W32(CounterAddrHigh, (u64)paddr >> 32);
- cmd = (u64)paddr & DMA_32BIT_MASK;
+ cmd = (u64)paddr & DMA_BIT_MASK(32);
RTL_W32(CounterAddrLow, cmd);
RTL_W32(CounterAddrLow, cmd | CounterDump);
tp->cp_cmd = PCIMulRW | RxChkSum;
if ((sizeof(dma_addr_t) > 4) &&
- !pci_set_dma_mask(pdev, DMA_64BIT_MASK) && use_dac) {
+ !pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) && use_dac) {
tp->cp_cmd |= PCIDAC;
dev->features |= NETIF_F_HIGHDMA;
} else {
- rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc < 0) {
if (netif_msg_probe(tp)) {
dev_err(&pdev->dev,
if (!tp->pcie_cap && netif_msg_probe(tp))
dev_info(&pdev->dev, "no PCI Express capability\n");
- /* Unneeded ? Don't mess with Mrs. Murphy. */
- rtl8169_irq_mask_and_ack(ioaddr);
+ RTL_W16(IntrMask, 0x0000);
/* Soft reset the chip. */
RTL_W8(ChipCmd, CmdReset);
msleep_interruptible(1);
}
+ RTL_W16(IntrStatus, 0xffff);
+
/* Identify chip attached to board */
rtl8169_get_mac_version(tp, ioaddr);
* Switching from MMIO to I/O access fixes the issue as well.
*/
RTL_W32(TxDescStartAddrHigh, ((u64) tp->TxPhyAddr) >> 32);
- RTL_W32(TxDescStartAddrLow, ((u64) tp->TxPhyAddr) & DMA_32BIT_MASK);
+ RTL_W32(TxDescStartAddrLow, ((u64) tp->TxPhyAddr) & DMA_BIT_MASK(32));
RTL_W32(RxDescAddrHigh, ((u64) tp->RxPhyAddr) >> 32);
- RTL_W32(RxDescAddrLow, ((u64) tp->RxPhyAddr) & DMA_32BIT_MASK);
+ RTL_W32(RxDescAddrLow, ((u64) tp->RxPhyAddr) & DMA_BIT_MASK(32));
}
static u16 rtl_rw_cpluscmd(void __iomem *ioaddr)
opts1 |= FirstFrag;
} else {
len = skb->len;
-
- if (unlikely(len < ETH_ZLEN)) {
- if (skb_padto(skb, ETH_ZLEN))
- goto err_update_stats;
- len = ETH_ZLEN;
- }
-
opts1 |= FirstFrag | LastFrag;
tp->tx_skb[entry].skb = skb;
}
err_stop:
netif_stop_queue(dev);
ret = NETDEV_TX_BUSY;
-err_update_stats:
dev->stats.tx_dropped++;
goto out;
}
int handled = 0;
int status;
+ /* loop handling interrupts until we have no new ones or
+ * we hit a invalid/hotplug case.
+ */
status = RTL_R16(IntrStatus);
+ while (status && status != 0xffff) {
+ handled = 1;
- /* hotplug/major error/no more work/shared irq */
- if ((status == 0xffff) || !status)
- goto out;
+ /* Handle all of the error cases first. These will reset
+ * the chip, so just exit the loop.
+ */
+ if (unlikely(!netif_running(dev))) {
+ rtl8169_asic_down(ioaddr);
+ break;
+ }
- handled = 1;
+ /* Work around for rx fifo overflow */
+ if (unlikely(status & RxFIFOOver) &&
+ (tp->mac_version == RTL_GIGA_MAC_VER_11)) {
+ netif_stop_queue(dev);
+ rtl8169_tx_timeout(dev);
+ break;
+ }
- if (unlikely(!netif_running(dev))) {
- rtl8169_asic_down(ioaddr);
- goto out;
- }
+ if (unlikely(status & SYSErr)) {
+ rtl8169_pcierr_interrupt(dev);
+ break;
+ }
- status &= tp->intr_mask;
- RTL_W16(IntrStatus,
- (status & RxFIFOOver) ? (status | RxOverflow) : status);
+ if (status & LinkChg)
+ rtl8169_check_link_status(dev, tp, ioaddr);
- if (!(status & tp->intr_event))
- goto out;
-
- /* Work around for rx fifo overflow */
- if (unlikely(status & RxFIFOOver) &&
- (tp->mac_version == RTL_GIGA_MAC_VER_11)) {
- netif_stop_queue(dev);
- rtl8169_tx_timeout(dev);
- goto out;
- }
+ /* We need to see the lastest version of tp->intr_mask to
+ * avoid ignoring an MSI interrupt and having to wait for
+ * another event which may never come.
+ */
+ smp_rmb();
+ if (status & tp->intr_mask & tp->napi_event) {
+ RTL_W16(IntrMask, tp->intr_event & ~tp->napi_event);
+ tp->intr_mask = ~tp->napi_event;
+
+ if (likely(napi_schedule_prep(&tp->napi)))
+ __napi_schedule(&tp->napi);
+ else if (netif_msg_intr(tp)) {
+ printk(KERN_INFO "%s: interrupt %04x in poll\n",
+ dev->name, status);
+ }
+ }
- if (unlikely(status & SYSErr)) {
- rtl8169_pcierr_interrupt(dev);
- goto out;
+ /* We only get a new MSI interrupt when all active irq
+ * sources on the chip have been acknowledged. So, ack
+ * everything we've seen and check if new sources have become
+ * active to avoid blocking all interrupts from the chip.
+ */
+ RTL_W16(IntrStatus,
+ (status & RxFIFOOver) ? (status | RxOverflow) : status);
+ status = RTL_R16(IntrStatus);
}
- if (status & LinkChg)
- rtl8169_check_link_status(dev, tp, ioaddr);
-
- if (status & tp->napi_event) {
- RTL_W16(IntrMask, tp->intr_event & ~tp->napi_event);
- tp->intr_mask = ~tp->napi_event;
-
- if (likely(netif_rx_schedule_prep(&tp->napi)))
- __netif_rx_schedule(&tp->napi);
- else if (netif_msg_intr(tp)) {
- printk(KERN_INFO "%s: interrupt %04x in poll\n",
- dev->name, status);
- }
- }
-out:
return IRQ_RETVAL(handled);
}
rtl8169_tx_interrupt(dev, tp, ioaddr);
if (work_done < budget) {
- netif_rx_complete(napi);
- tp->intr_mask = 0xffff;
- /*
- * 20040426: the barrier is not strictly required but the
- * behavior of the irq handler could be less predictable
- * without it. Btw, the lack of flush for the posted pci
- * write is safe - FR
+ napi_complete(napi);
+
+ /* We need for force the visibility of tp->intr_mask
+ * for other CPUs, as we can loose an MSI interrupt
+ * and potentially wait for a retransmit timeout if we don't.
+ * The posted write to IntrMask is safe, as it will
+ * eventually make it to the chip and we won't loose anything
+ * until it does.
*/
+ tp->intr_mask = 0xffff;
smp_wmb();
RTL_W16(IntrMask, tp->intr_event);
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff