MODULE_AUTHOR("Andy Fleming");
MODULE_LICENSE("GPL");
-static struct phy_driver genphy_driver;
-extern int mdio_bus_init(void);
-extern void mdio_bus_exit(void);
-
void phy_device_free(struct phy_device *phydev)
{
kfree(phydev);
}
+EXPORT_SYMBOL(phy_device_free);
static void phy_device_release(struct device *dev)
{
phy_device_free(to_phy_device(dev));
}
+static struct phy_driver genphy_driver;
+extern int mdio_bus_init(void);
+extern void mdio_bus_exit(void);
+
static LIST_HEAD(phy_fixup_list);
static DEFINE_MUTEX(phy_fixup_lock);
if (!fixup)
return -ENOMEM;
- strncpy(fixup->bus_id, bus_id, BUS_ID_SIZE);
+ strlcpy(fixup->bus_id, bus_id, sizeof(fixup->bus_id));
fixup->phy_uid = phy_uid;
fixup->phy_uid_mask = phy_uid_mask;
fixup->run = run;
*/
static int phy_needs_fixup(struct phy_device *phydev, struct phy_fixup *fixup)
{
- if (strcmp(fixup->bus_id, phydev->dev.bus_id) != 0)
+ if (strcmp(fixup->bus_id, dev_name(&phydev->dev)) != 0)
if (strcmp(fixup->bus_id, PHY_ANY_ID) != 0)
return 0;
err = fixup->run(phydev);
- if (err < 0)
+ if (err < 0) {
+ mutex_unlock(&phy_fixup_lock);
return err;
+ }
}
}
mutex_unlock(&phy_fixup_lock);
dev->addr = addr;
dev->phy_id = phy_id;
dev->bus = bus;
+ dev->dev.parent = bus->parent;
+ dev->dev.bus = &mdio_bus_type;
+ dev->irq = bus->irq != NULL ? bus->irq[addr] : PHY_POLL;
+ dev_set_name(&dev->dev, PHY_ID_FMT, bus->id, addr);
dev->state = PHY_DOWN;
if (r)
return ERR_PTR(r);
- /* If the phy_id is all Fs, there is no device there */
- if (0xffffffff == phy_id)
+ /* If the phy_id is mostly Fs, there is no device there */
+ if ((phy_id & 0x1fffffff) == 0x1fffffff)
return NULL;
dev = phy_device_create(bus, addr, phy_id);
return dev;
}
+EXPORT_SYMBOL(get_phy_device);
+
+/**
+ * phy_device_register - Register the phy device on the MDIO bus
+ * @phydev: phy_device structure to be added to the MDIO bus
+ */
+int phy_device_register(struct phy_device *phydev)
+{
+ int err;
+
+ /* Don't register a phy if one is already registered at this
+ * address */
+ if (phydev->bus->phy_map[phydev->addr])
+ return -EINVAL;
+ phydev->bus->phy_map[phydev->addr] = phydev;
+
+ /* Run all of the fixups for this PHY */
+ phy_scan_fixups(phydev);
+
+ err = device_register(&phydev->dev);
+ if (err) {
+ pr_err("phy %d failed to register\n", phydev->addr);
+ goto out;
+ }
+
+ return 0;
+
+ out:
+ phydev->bus->phy_map[phydev->addr] = NULL;
+ return err;
+}
+EXPORT_SYMBOL(phy_device_register);
/**
* phy_prepare_link - prepares the PHY layer to monitor link status
}
/**
+ * phy_connect_direct - connect an ethernet device to a specific phy_device
+ * @dev: the network device to connect
+ * @phydev: the pointer to the phy device
+ * @handler: callback function for state change notifications
+ * @flags: PHY device's dev_flags
+ * @interface: PHY device's interface
+ */
+int phy_connect_direct(struct net_device *dev, struct phy_device *phydev,
+ void (*handler)(struct net_device *), u32 flags,
+ phy_interface_t interface)
+{
+ int rc;
+
+ rc = phy_attach_direct(dev, phydev, flags, interface);
+ if (rc)
+ return rc;
+
+ phy_prepare_link(phydev, handler);
+ phy_start_machine(phydev, NULL);
+ if (phydev->irq > 0)
+ phy_start_interrupts(phydev);
+
+ return 0;
+}
+EXPORT_SYMBOL(phy_connect_direct);
+
+/**
* phy_connect - connect an ethernet device to a PHY device
* @dev: the network device to connect
* @bus_id: the id string of the PHY device to connect
phy_interface_t interface)
{
struct phy_device *phydev;
+ struct device *d;
+ int rc;
- phydev = phy_attach(dev, bus_id, flags, interface);
-
- if (IS_ERR(phydev))
- return phydev;
-
- phy_prepare_link(phydev, handler);
-
- phy_start_machine(phydev, NULL);
+ /* Search the list of PHY devices on the mdio bus for the
+ * PHY with the requested name */
+ d = bus_find_device_by_name(&mdio_bus_type, NULL, bus_id);
+ if (!d) {
+ pr_err("PHY %s not found\n", bus_id);
+ return ERR_PTR(-ENODEV);
+ }
+ phydev = to_phy_device(d);
- if (phydev->irq > 0)
- phy_start_interrupts(phydev);
+ rc = phy_connect_direct(dev, phydev, handler, flags, interface);
+ if (rc)
+ return ERR_PTR(rc);
return phydev;
}
}
EXPORT_SYMBOL(phy_disconnect);
-static int phy_compare_id(struct device *dev, void *data)
+int phy_init_hw(struct phy_device *phydev)
{
- return strcmp((char *)data, dev->bus_id) ? 0 : 1;
+ int ret;
+
+ if (!phydev->drv || !phydev->drv->config_init)
+ return 0;
+
+ ret = phy_scan_fixups(phydev);
+ if (ret < 0)
+ return ret;
+
+ return phydev->drv->config_init(phydev);
}
/**
- * phy_attach - attach a network device to a particular PHY device
+ * phy_attach_direct - attach a network device to a given PHY device pointer
* @dev: network device to attach
- * @bus_id: PHY device to attach
+ * @phydev: Pointer to phy_device to attach
* @flags: PHY device's dev_flags
* @interface: PHY device's interface
*
* the attaching device, and given a callback for link status
* change. The phy_device is returned to the attaching driver.
*/
-struct phy_device *phy_attach(struct net_device *dev,
- const char *bus_id, u32 flags, phy_interface_t interface)
+int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
+ u32 flags, phy_interface_t interface)
{
- struct bus_type *bus = &mdio_bus_type;
- struct phy_device *phydev;
- struct device *d;
-
- /* Search the list of PHY devices on the mdio bus for the
- * PHY with the requested name */
- d = bus_find_device(bus, NULL, (void *)bus_id, phy_compare_id);
-
- if (d) {
- phydev = to_phy_device(d);
- } else {
- printk(KERN_ERR "%s not found\n", bus_id);
- return ERR_PTR(-ENODEV);
- }
+ struct device *d = &phydev->dev;
/* Assume that if there is no driver, that it doesn't
* exist, and we should use the genphy driver. */
err = device_bind_driver(d);
if (err)
- return ERR_PTR(err);
+ return err;
}
if (phydev->attached_dev) {
- printk(KERN_ERR "%s: %s already attached\n",
- dev->name, bus_id);
- return ERR_PTR(-EBUSY);
+ dev_err(&dev->dev, "PHY already attached\n");
+ return -EBUSY;
}
phydev->attached_dev = dev;
/* Do initial configuration here, now that
* we have certain key parameters
* (dev_flags and interface) */
- if (phydev->drv->config_init) {
- int err;
-
- err = phy_scan_fixups(phydev);
-
- if (err < 0)
- return ERR_PTR(err);
+ return phy_init_hw(phydev);
+}
+EXPORT_SYMBOL(phy_attach_direct);
- err = phydev->drv->config_init(phydev);
+/**
+ * phy_attach - attach a network device to a particular PHY device
+ * @dev: network device to attach
+ * @bus_id: Bus ID of PHY device to attach
+ * @flags: PHY device's dev_flags
+ * @interface: PHY device's interface
+ *
+ * Description: Same as phy_attach_direct() except that a PHY bus_id
+ * string is passed instead of a pointer to a struct phy_device.
+ */
+struct phy_device *phy_attach(struct net_device *dev,
+ const char *bus_id, u32 flags, phy_interface_t interface)
+{
+ struct bus_type *bus = &mdio_bus_type;
+ struct phy_device *phydev;
+ struct device *d;
+ int rc;
- if (err < 0)
- return ERR_PTR(err);
+ /* Search the list of PHY devices on the mdio bus for the
+ * PHY with the requested name */
+ d = bus_find_device_by_name(bus, NULL, bus_id);
+ if (!d) {
+ pr_err("PHY %s not found\n", bus_id);
+ return ERR_PTR(-ENODEV);
}
+ phydev = to_phy_device(d);
+
+ rc = phy_attach_direct(dev, phydev, flags, interface);
+ if (rc)
+ return ERR_PTR(rc);
return phydev;
}
err = phy_write(phydev, MII_BMCR, ctl);
- if (err < 0)
- return err;
-
- /*
- * Run the fixups on this PHY, just in case the
- * board code needs to change something after a reset
- */
- err = phy_scan_fixups(phydev);
-
- if (err < 0)
- return err;
-
- /* We just reset the device, so we'd better configure any
- * settings the PHY requires to operate */
- if (phydev->drv->config_init)
- err = phydev->drv->config_init(phydev);
-
return err;
}
return ctl;
}
+EXPORT_SYMBOL(genphy_restart_aneg);
/**
*/
int genphy_config_aneg(struct phy_device *phydev)
{
- int result = 0;
+ int result;
- if (AUTONEG_ENABLE == phydev->autoneg) {
- int result = genphy_config_advert(phydev);
+ if (AUTONEG_ENABLE != phydev->autoneg)
+ return genphy_setup_forced(phydev);
+
+ result = genphy_config_advert(phydev);
+
+ if (result < 0) /* error */
+ return result;
+
+ if (result == 0) {
+ /* Advertisment hasn't changed, but maybe aneg was never on to
+ * begin with? Or maybe phy was isolated? */
+ int ctl = phy_read(phydev, MII_BMCR);
- if (result < 0) /* error */
- return result;
+ if (ctl < 0)
+ return ctl;
- /* Only restart aneg if we are advertising something different
- * than we were before. */
- if (result > 0)
- result = genphy_restart_aneg(phydev);
- } else
- result = genphy_setup_forced(phydev);
+ if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE))
+ result = 1; /* do restart aneg */
+ }
+
+ /* Only restart aneg if we are advertising something different
+ * than we were before. */
+ if (result > 0)
+ result = genphy_restart_aneg(phydev);
return result;
}
return 0;
}
+int genphy_suspend(struct phy_device *phydev)
+{
+ int value;
+
+ mutex_lock(&phydev->lock);
+
+ value = phy_read(phydev, MII_BMCR);
+ phy_write(phydev, MII_BMCR, (value | BMCR_PDOWN));
+
+ mutex_unlock(&phydev->lock);
+
+ return 0;
+}
+EXPORT_SYMBOL(genphy_suspend);
+
+int genphy_resume(struct phy_device *phydev)
+{
+ int value;
+
+ mutex_lock(&phydev->lock);
+
+ value = phy_read(phydev, MII_BMCR);
+ phy_write(phydev, MII_BMCR, (value & ~BMCR_PDOWN));
+ mutex_unlock(&phydev->lock);
+
+ return 0;
+}
+EXPORT_SYMBOL(genphy_resume);
/**
* phy_probe - probe and init a PHY device
{
int retval;
- memset(&new_driver->driver, 0, sizeof(new_driver->driver));
new_driver->driver.name = new_driver->name;
new_driver->driver.bus = &mdio_bus_type;
new_driver->driver.probe = phy_probe;
.features = 0,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
.driver = {.owner= THIS_MODULE, },
};
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff