-#define VERSION "0.22"
+#define VERSION "0.23"
/* ns83820.c by Benjamin LaHaise with contributions.
*
* Questions/comments/discussion to linux-ns83820@kvack.org.
* 0.20 - fix stupid RFEN thinko. i am such a smurf.
* 20040828 0.21 - add hardware vlan accleration
* by Neil Horman <nhorman@redhat.com>
- * 20050406 0.22 - improved DAC ifdefs from Andi Kleen
+ * 20050406 0.22 - improved DAC ifdefs from Andi Kleen
* - removal of dead code from Adrian Bunk
* - fix half duplex collision behaviour
* Driver Overview
//#define dprintk printk
#define dprintk(x...) do { } while (0)
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/types.h>
#include <linux/pci.h>
+#include <linux/dma-mapping.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/delay.h>
-#include <linux/smp_lock.h>
#include <linux/workqueue.h>
#include <linux/init.h>
#include <linux/ip.h> /* for iph */
#include <linux/in.h> /* for IPPROTO_... */
-#include <linux/eeprom.h>
#include <linux/compiler.h>
#include <linux/prefetch.h>
#include <linux/ethtool.h>
+#include <linux/sched.h>
#include <linux/timer.h>
#include <linux/if_vlan.h>
+#include <linux/rtnetlink.h>
+#include <linux/jiffies.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#define LINK_DOWN 0x02
#define LINK_UP 0x04
-#define HW_ADDR_LEN sizeof(dma_addr_t)
+#define HW_ADDR_LEN sizeof(dma_addr_t)
#define desc_addr_set(desc, addr) \
do { \
((desc)[0] = cpu_to_le32(addr)); \
struct rx_info {
spinlock_t lock;
int up;
- long idle;
+ unsigned long idle;
struct sk_buff *skbs[NR_RX_DESC];
- u32 *next_rx_desc;
+ __le32 *next_rx_desc;
u16 next_rx, next_empty;
- u32 *descs;
+ __le32 *descs;
dma_addr_t phy_descs;
};
u8 __iomem *base;
struct pci_dev *pci_dev;
+ struct net_device *ndev;
#ifdef NS83820_VLAN_ACCEL_SUPPORT
struct vlan_group *vlgrp;
u32 MEAR_cache;
u32 IMR_cache;
- struct eeprom ee;
unsigned linkstate;
struct sk_buff *tx_skbs[NR_TX_DESC];
char pad[16] __attribute__((aligned(16)));
- u32 *tx_descs;
+ __le32 *tx_descs;
dma_addr_t tx_phy_descs;
struct timer_list tx_watchdog;
(((NR_TX_DESC-2 + dev->tx_done_idx - dev->tx_free_idx) % NR_TX_DESC) > MIN_TX_DESC_FREE)
-#ifdef NS83820_VLAN_ACCEL_SUPPORT
+#ifdef NS83820_VLAN_ACCEL_SUPPORT
static void ns83820_vlan_rx_register(struct net_device *ndev, struct vlan_group *grp)
{
struct ns83820 *dev = PRIV(ndev);
spin_unlock(&dev->tx_lock);
spin_unlock_irq(&dev->misc_lock);
}
-
-static void ns83820_vlan_rx_kill_vid(struct net_device *ndev, unsigned short vid)
-{
- struct ns83820 *dev = PRIV(ndev);
-
- spin_lock_irq(&dev->misc_lock);
- spin_lock(&dev->tx_lock);
- if (dev->vlgrp)
- dev->vlgrp->vlan_devices[vid] = NULL;
- spin_unlock(&dev->tx_lock);
- spin_unlock_irq(&dev->misc_lock);
-}
#endif
/* Packet Receiver
* conditions, still route realtime traffic with as low jitter as
* possible.
*/
-static inline void build_rx_desc(struct ns83820 *dev, u32 *desc, dma_addr_t link, dma_addr_t buf, u32 cmdsts, u32 extsts)
+static inline void build_rx_desc(struct ns83820 *dev, __le32 *desc, dma_addr_t link, dma_addr_t buf, u32 cmdsts, u32 extsts)
{
desc_addr_set(desc + DESC_LINK, link);
desc_addr_set(desc + DESC_BUFPTR, buf);
{
unsigned next_empty;
u32 cmdsts;
- u32 *sg;
+ __le32 *sg;
dma_addr_t buf;
next_empty = dev->rx_info.next_empty;
#endif
sg = dev->rx_info.descs + (next_empty * DESC_SIZE);
- if (unlikely(NULL != dev->rx_info.skbs[next_empty]))
- BUG();
+ BUG_ON(NULL != dev->rx_info.skbs[next_empty]);
dev->rx_info.skbs[next_empty] = skb;
dev->rx_info.next_empty = (next_empty + 1) % NR_RX_DESC;
cmdsts = REAL_RX_BUF_SIZE | CMDSTS_INTR;
- buf = pci_map_single(dev->pci_dev, skb->tail,
+ buf = pci_map_single(dev->pci_dev, skb->data,
REAL_RX_BUF_SIZE, PCI_DMA_FROMDEVICE);
build_rx_desc(dev, sg, 0, buf, cmdsts, 0);
/* update link of previous rx */
return 0;
}
-static inline int rx_refill(struct net_device *ndev, int gfp)
+static inline int rx_refill(struct net_device *ndev, gfp_t gfp)
{
struct ns83820 *dev = PRIV(ndev);
unsigned i;
for (i=0; i<NR_RX_DESC; i++) {
struct sk_buff *skb;
long res;
+
/* extra 16 bytes for alignment */
- skb = __dev_alloc_skb(REAL_RX_BUF_SIZE+16, gfp);
+ skb = __netdev_alloc_skb(ndev, REAL_RX_BUF_SIZE+16, gfp);
if (unlikely(!skb))
break;
- res = (long)skb->tail & 0xf;
- res = 0x10 - res;
- res &= 0xf;
- skb_reserve(skb, res);
-
- skb->dev = ndev;
+ skb_reserve(skb, skb->data - PTR_ALIGN(skb->data, 16));
if (gfp != GFP_ATOMIC)
spin_lock_irqsave(&dev->rx_info.lock, flags);
res = ns83820_add_rx_skb(dev, skb);
return i ? 0 : -ENOMEM;
}
-static void FASTCALL(rx_refill_atomic(struct net_device *ndev));
-static void fastcall rx_refill_atomic(struct net_device *ndev)
+static void rx_refill_atomic(struct net_device *ndev)
{
rx_refill(ndev, GFP_ATOMIC);
}
/* REFILL */
-static inline void queue_refill(void *_dev)
+static inline void queue_refill(struct work_struct *work)
{
- struct net_device *ndev = _dev;
- struct ns83820 *dev = PRIV(ndev);
+ struct ns83820 *dev = container_of(work, struct ns83820, tq_refill);
+ struct net_device *ndev = dev->ndev;
rx_refill(ndev, GFP_KERNEL);
if (dev->rx_info.up)
build_rx_desc(dev, dev->rx_info.descs + (DESC_SIZE * i), 0, 0, CMDSTS_OWN, 0);
}
-static void FASTCALL(phy_intr(struct net_device *ndev));
-static void fastcall phy_intr(struct net_device *ndev)
+static void phy_intr(struct net_device *ndev)
{
struct ns83820 *dev = PRIV(ndev);
- static char *speeds[] = { "10", "100", "1000", "1000(?)", "1000F" };
+ static const char *speeds[] = { "10", "100", "1000", "1000(?)", "1000F" };
u32 cfg, new_cfg;
u32 tbisr, tanar, tanlpar;
int speed, fullduplex, newlinkstate;
dprintk("phy_intr: tbisr=%08x, tanar=%08x, tanlpar=%08x\n",
tbisr, tanar, tanlpar);
- if ( (fullduplex = (tanlpar & TANAR_FULL_DUP)
- && (tanar & TANAR_FULL_DUP)) ) {
+ if ( (fullduplex = (tanlpar & TANAR_FULL_DUP) &&
+ (tanar & TANAR_FULL_DUP)) ) {
/* both of us are full duplex */
writel(readl(dev->base + TXCFG)
writel(readl(dev->base + GPIOR) | GPIOR_GP1_OUT,
dev->base + GPIOR);
- } else if(((tanlpar & TANAR_HALF_DUP)
- && (tanar & TANAR_HALF_DUP))
- || ((tanlpar & TANAR_FULL_DUP)
- && (tanar & TANAR_HALF_DUP))
- || ((tanlpar & TANAR_HALF_DUP)
- && (tanar & TANAR_FULL_DUP))) {
+ } else if (((tanlpar & TANAR_HALF_DUP) &&
+ (tanar & TANAR_HALF_DUP)) ||
+ ((tanlpar & TANAR_FULL_DUP) &&
+ (tanar & TANAR_HALF_DUP)) ||
+ ((tanlpar & TANAR_HALF_DUP) &&
+ (tanar & TANAR_FULL_DUP))) {
/* one or both of us are half duplex */
writel((readl(dev->base + TXCFG)
newlinkstate = (cfg & CFG_LNKSTS) ? LINK_UP : LINK_DOWN;
- if (newlinkstate & LINK_UP
- && dev->linkstate != newlinkstate) {
+ if (newlinkstate & LINK_UP &&
+ dev->linkstate != newlinkstate) {
netif_start_queue(ndev);
netif_wake_queue(ndev);
printk(KERN_INFO "%s: link now %s mbps, %s duplex and up.\n",
ndev->name,
speeds[speed],
fullduplex ? "full" : "half");
- } else if (newlinkstate & LINK_DOWN
- && dev->linkstate != newlinkstate) {
+ } else if (newlinkstate & LINK_DOWN &&
+ dev->linkstate != newlinkstate) {
netif_stop_queue(ndev);
printk(KERN_INFO "%s: link now down.\n", ndev->name);
}
writel(dev->IMR_cache, dev->base + IMR);
writel(1, dev->base + IER);
- spin_unlock_irq(&dev->misc_lock);
+ spin_unlock(&dev->misc_lock);
kick_rx(ndev);
struct sk_buff *skb = dev->rx_info.skbs[i];
dev->rx_info.skbs[i] = NULL;
clear_rx_desc(dev, i);
- if (skb)
- kfree_skb(skb);
+ kfree_skb(skb);
}
}
-static void FASTCALL(ns83820_rx_kick(struct net_device *ndev));
-static void fastcall ns83820_rx_kick(struct net_device *ndev)
+static void ns83820_rx_kick(struct net_device *ndev)
{
struct ns83820 *dev = PRIV(ndev);
/*if (nr_rx_empty(dev) >= NR_RX_DESC/4)*/ {
}
/* rx_irq
- *
+ *
*/
-static void FASTCALL(rx_irq(struct net_device *ndev));
-static void fastcall rx_irq(struct net_device *ndev)
+static void rx_irq(struct net_device *ndev)
{
struct ns83820 *dev = PRIV(ndev);
struct rx_info *info = &dev->rx_info;
unsigned next_rx;
int rx_rc, len;
- u32 cmdsts, *desc;
+ u32 cmdsts;
+ __le32 *desc;
unsigned long flags;
int nr = 0;
* that are 64 bytes with a vlan header appended
* like arp frames, or pings, are flagged as Runts
* when the tag is stripped and hardware. This
- * also means that the OK bit in the descriptor
+ * also means that the OK bit in the descriptor
* is cleared when the frame comes in so we have
* to do a specific length check here to make sure
* the frame would have been ok, had we not stripped
* the tag.
- */
+ */
if (likely((CMDSTS_OK & cmdsts) ||
- ((cmdsts & CMDSTS_RUNT) && len >= 56))) {
+ ((cmdsts & CMDSTS_RUNT) && len >= 56))) {
#else
if (likely(CMDSTS_OK & cmdsts)) {
#endif
skb->ip_summed = CHECKSUM_NONE;
}
skb->protocol = eth_type_trans(skb, ndev);
-#ifdef NS83820_VLAN_ACCEL_SUPPORT
+#ifdef NS83820_VLAN_ACCEL_SUPPORT
if(extsts & EXTSTS_VPKT) {
unsigned short tag;
tag = ntohs(extsts & EXTSTS_VTG_MASK);
static void do_tx_done(struct net_device *ndev)
{
struct ns83820 *dev = PRIV(ndev);
- u32 cmdsts, tx_done_idx, *desc;
-
- spin_lock_irq(&dev->tx_lock);
+ u32 cmdsts, tx_done_idx;
+ __le32 *desc;
dprintk("do_tx_done(%p)\n", ndev);
tx_done_idx = dev->tx_done_idx;
dev_kfree_skb_irq(skb);
atomic_dec(&dev->nr_tx_skbs);
} else
- pci_unmap_page(dev->pci_dev,
+ pci_unmap_page(dev->pci_dev,
addr,
len,
PCI_DMA_TODEVICE);
netif_start_queue(ndev);
netif_wake_queue(ndev);
}
- spin_unlock_irq(&dev->tx_lock);
}
static void ns83820_cleanup_tx(struct ns83820 *dev)
struct sk_buff *skb = dev->tx_skbs[i];
dev->tx_skbs[i] = NULL;
if (skb) {
- u32 *desc = dev->tx_descs + (i * DESC_SIZE);
+ __le32 *desc = dev->tx_descs + (i * DESC_SIZE);
pci_unmap_single(dev->pci_dev,
desc_addr_get(desc + DESC_BUFPTR),
le32_to_cpu(desc[DESC_CMDSTS]) & CMDSTS_LEN_MASK,
* while trying to track down a bug in either the zero copy code or
* the tx fifo (hence the MAX_FRAG_LEN).
*/
-static int ns83820_hard_start_xmit(struct sk_buff *skb, struct net_device *ndev)
+static netdev_tx_t ns83820_hard_start_xmit(struct sk_buff *skb,
+ struct net_device *ndev)
{
struct ns83820 *dev = PRIV(ndev);
u32 free_idx, cmdsts, extsts;
skb_frag_t *frag;
int stopped = 0;
int do_intr = 0;
- volatile u32 *first_desc;
+ volatile __le32 *first_desc;
dprintk("ns83820_hard_start_xmit\n");
if (unlikely(dev->CFG_cache & CFG_LNKSTS)) {
netif_stop_queue(ndev);
if (unlikely(dev->CFG_cache & CFG_LNKSTS))
- return 1;
+ return NETDEV_TX_BUSY;
netif_start_queue(ndev);
}
netif_start_queue(ndev);
goto again;
}
- return 1;
+ return NETDEV_TX_BUSY;
}
if (free_idx == dev->tx_intr_idx) {
if (!nr_frags)
frag = NULL;
extsts = 0;
- if (skb->ip_summed == CHECKSUM_HW) {
+ if (skb->ip_summed == CHECKSUM_PARTIAL) {
extsts |= EXTSTS_IPPKT;
- if (IPPROTO_TCP == skb->nh.iph->protocol)
+ if (IPPROTO_TCP == ip_hdr(skb)->protocol)
extsts |= EXTSTS_TCPPKT;
- else if (IPPROTO_UDP == skb->nh.iph->protocol)
+ else if (IPPROTO_UDP == ip_hdr(skb)->protocol)
extsts |= EXTSTS_UDPPKT;
}
first_desc = dev->tx_descs + (free_idx * DESC_SIZE);
for (;;) {
- volatile u32 *desc = dev->tx_descs + (free_idx * DESC_SIZE);
+ volatile __le32 *desc = dev->tx_descs + (free_idx * DESC_SIZE);
dprintk("frag[%3u]: %4u @ 0x%08Lx\n", free_idx, len,
(unsigned long long)buf);
if (stopped && (dev->tx_done_idx != tx_done_idx) && start_tx_okay(dev))
netif_start_queue(ndev);
- /* set the transmit start time to catch transmit timeouts */
- ndev->trans_start = jiffies;
- return 0;
+ return NETDEV_TX_OK;
}
static void ns83820_update_stats(struct ns83820 *dev)
return &dev->stats;
}
+/* Let ethtool retrieve info */
+static int ns83820_get_settings(struct net_device *ndev,
+ struct ethtool_cmd *cmd)
+{
+ struct ns83820 *dev = PRIV(ndev);
+ u32 cfg, tanar, tbicr;
+ int have_optical = 0;
+ int fullduplex = 0;
+
+ /*
+ * Here's the list of available ethtool commands from other drivers:
+ * cmd->advertising =
+ * cmd->speed =
+ * cmd->duplex =
+ * cmd->port = 0;
+ * cmd->phy_address =
+ * cmd->transceiver = 0;
+ * cmd->autoneg =
+ * cmd->maxtxpkt = 0;
+ * cmd->maxrxpkt = 0;
+ */
+
+ /* read current configuration */
+ cfg = readl(dev->base + CFG) ^ SPDSTS_POLARITY;
+ tanar = readl(dev->base + TANAR);
+ tbicr = readl(dev->base + TBICR);
+
+ if (dev->CFG_cache & CFG_TBI_EN) {
+ /* we have an optical interface */
+ have_optical = 1;
+ fullduplex = (cfg & CFG_DUPSTS) ? 1 : 0;
+
+ } else {
+ /* We have copper */
+ fullduplex = (cfg & CFG_DUPSTS) ? 1 : 0;
+ }
+
+ cmd->supported = SUPPORTED_Autoneg;
+
+ /* we have optical interface */
+ if (dev->CFG_cache & CFG_TBI_EN) {
+ cmd->supported |= SUPPORTED_1000baseT_Half |
+ SUPPORTED_1000baseT_Full |
+ SUPPORTED_FIBRE;
+ cmd->port = PORT_FIBRE;
+ } /* TODO: else copper related support */
+
+ cmd->duplex = fullduplex ? DUPLEX_FULL : DUPLEX_HALF;
+ switch (cfg / CFG_SPDSTS0 & 3) {
+ case 2:
+ cmd->speed = SPEED_1000;
+ break;
+ case 1:
+ cmd->speed = SPEED_100;
+ break;
+ default:
+ cmd->speed = SPEED_10;
+ break;
+ }
+ cmd->autoneg = (tbicr & TBICR_MR_AN_ENABLE) ? 1: 0;
+ return 0;
+}
+
+/* Let ethool change settings*/
+static int ns83820_set_settings(struct net_device *ndev,
+ struct ethtool_cmd *cmd)
+{
+ struct ns83820 *dev = PRIV(ndev);
+ u32 cfg, tanar;
+ int have_optical = 0;
+ int fullduplex = 0;
+
+ /* read current configuration */
+ cfg = readl(dev->base + CFG) ^ SPDSTS_POLARITY;
+ tanar = readl(dev->base + TANAR);
+
+ if (dev->CFG_cache & CFG_TBI_EN) {
+ /* we have optical */
+ have_optical = 1;
+ fullduplex = (tanar & TANAR_FULL_DUP);
+
+ } else {
+ /* we have copper */
+ fullduplex = cfg & CFG_DUPSTS;
+ }
+
+ spin_lock_irq(&dev->misc_lock);
+ spin_lock(&dev->tx_lock);
+
+ /* Set duplex */
+ if (cmd->duplex != fullduplex) {
+ if (have_optical) {
+ /*set full duplex*/
+ if (cmd->duplex == DUPLEX_FULL) {
+ /* force full duplex */
+ writel(readl(dev->base + TXCFG)
+ | TXCFG_CSI | TXCFG_HBI | TXCFG_ATP,
+ dev->base + TXCFG);
+ writel(readl(dev->base + RXCFG) | RXCFG_RX_FD,
+ dev->base + RXCFG);
+ /* Light up full duplex LED */
+ writel(readl(dev->base + GPIOR) | GPIOR_GP1_OUT,
+ dev->base + GPIOR);
+ } else {
+ /*TODO: set half duplex */
+ }
+
+ } else {
+ /*we have copper*/
+ /* TODO: Set duplex for copper cards */
+ }
+ printk(KERN_INFO "%s: Duplex set via ethtool\n",
+ ndev->name);
+ }
+
+ /* Set autonegotiation */
+ if (1) {
+ if (cmd->autoneg == AUTONEG_ENABLE) {
+ /* restart auto negotiation */
+ writel(TBICR_MR_AN_ENABLE | TBICR_MR_RESTART_AN,
+ dev->base + TBICR);
+ writel(TBICR_MR_AN_ENABLE, dev->base + TBICR);
+ dev->linkstate = LINK_AUTONEGOTIATE;
+
+ printk(KERN_INFO "%s: autoneg enabled via ethtool\n",
+ ndev->name);
+ } else {
+ /* disable auto negotiation */
+ writel(0x00000000, dev->base + TBICR);
+ }
+
+ printk(KERN_INFO "%s: autoneg %s via ethtool\n", ndev->name,
+ cmd->autoneg ? "ENABLED" : "DISABLED");
+ }
+
+ phy_intr(ndev);
+ spin_unlock(&dev->tx_lock);
+ spin_unlock_irq(&dev->misc_lock);
+
+ return 0;
+}
+/* end ethtool get/set support -df */
+
static void ns83820_get_drvinfo(struct net_device *ndev, struct ethtool_drvinfo *info)
{
struct ns83820 *dev = PRIV(ndev);
return cfg & CFG_LNKSTS ? 1 : 0;
}
-static struct ethtool_ops ops = {
- .get_drvinfo = ns83820_get_drvinfo,
- .get_link = ns83820_get_link
+static const struct ethtool_ops ops = {
+ .get_settings = ns83820_get_settings,
+ .set_settings = ns83820_set_settings,
+ .get_drvinfo = ns83820_get_drvinfo,
+ .get_link = ns83820_get_link
};
+/* this function is called in irq context from the ISR */
static void ns83820_mib_isr(struct ns83820 *dev)
{
- spin_lock(&dev->misc_lock);
+ unsigned long flags;
+ spin_lock_irqsave(&dev->misc_lock, flags);
ns83820_update_stats(dev);
- spin_unlock(&dev->misc_lock);
+ spin_unlock_irqrestore(&dev->misc_lock, flags);
}
static void ns83820_do_isr(struct net_device *ndev, u32 isr);
-static irqreturn_t ns83820_irq(int foo, void *data, struct pt_regs *regs)
+static irqreturn_t ns83820_irq(int foo, void *data)
{
struct net_device *ndev = data;
struct ns83820 *dev = PRIV(ndev);
static void ns83820_do_isr(struct net_device *ndev, u32 isr)
{
struct ns83820 *dev = PRIV(ndev);
+ unsigned long flags;
+
#ifdef DEBUG
if (isr & ~(ISR_PHY | ISR_RXDESC | ISR_RXEARLY | ISR_RXOK | ISR_RXERR | ISR_TXIDLE | ISR_TXOK | ISR_TXDESC))
Dprintk("odd isr? 0x%08x\n", isr);
if ((ISR_RXDESC | ISR_RXOK) & isr) {
prefetch(dev->rx_info.next_rx_desc);
- spin_lock_irq(&dev->misc_lock);
+ spin_lock_irqsave(&dev->misc_lock, flags);
dev->IMR_cache &= ~(ISR_RXDESC | ISR_RXOK);
writel(dev->IMR_cache, dev->base + IMR);
- spin_unlock_irq(&dev->misc_lock);
+ spin_unlock_irqrestore(&dev->misc_lock, flags);
tasklet_schedule(&dev->rx_tasklet);
//rx_irq(ndev);
dev->tx_idx = 0;
}
/* The may have been a race between a pci originated read
- * and the descriptor update from the cpu. Just in case,
- * kick the transmitter if the hardware thinks it is on a
+ * and the descriptor update from the cpu. Just in case,
+ * kick the transmitter if the hardware thinks it is on a
* different descriptor than we are.
*/
if (dev->tx_idx != dev->tx_free_idx)
* work has accumulated
*/
if ((ISR_TXDESC | ISR_TXIDLE | ISR_TXOK | ISR_TXERR) & isr) {
+ spin_lock_irqsave(&dev->tx_lock, flags);
do_tx_done(ndev);
+ spin_unlock_irqrestore(&dev->tx_lock, flags);
/* Disable TxOk if there are no outstanding tx packets.
*/
if ((dev->tx_done_idx == dev->tx_free_idx) &&
(dev->IMR_cache & ISR_TXOK)) {
- spin_lock_irq(&dev->misc_lock);
+ spin_lock_irqsave(&dev->misc_lock, flags);
dev->IMR_cache &= ~ISR_TXOK;
writel(dev->IMR_cache, dev->base + IMR);
- spin_unlock_irq(&dev->misc_lock);
+ spin_unlock_irqrestore(&dev->misc_lock, flags);
}
}
/* The TxIdle interrupt can come in before the transmit has
* completed. Normally we reap packets off of the combination
- * of TxDesc and TxIdle and leave TxOk disabled (since it
- * occurs on every packet), but when no further irqs of this
+ * of TxDesc and TxIdle and leave TxOk disabled (since it
+ * occurs on every packet), but when no further irqs of this
* nature are expected, we must enable TxOk.
*/
if ((ISR_TXIDLE & isr) && (dev->tx_done_idx != dev->tx_free_idx)) {
- spin_lock_irq(&dev->misc_lock);
+ spin_lock_irqsave(&dev->misc_lock, flags);
dev->IMR_cache |= ISR_TXOK;
writel(dev->IMR_cache, dev->base + IMR);
- spin_unlock_irq(&dev->misc_lock);
+ spin_unlock_irqrestore(&dev->misc_lock, flags);
}
/* MIB interrupt: one of the statistics counters is about to overflow */
static void ns83820_tx_timeout(struct net_device *ndev)
{
struct ns83820 *dev = PRIV(ndev);
- u32 tx_done_idx, *desc;
+ u32 tx_done_idx;
+ __le32 *desc;
unsigned long flags;
- local_irq_save(flags);
+ spin_lock_irqsave(&dev->tx_lock, flags);
tx_done_idx = dev->tx_done_idx;
desc = dev->tx_descs + (tx_done_idx * DESC_SIZE);
ndev->name,
tx_done_idx, dev->tx_free_idx, le32_to_cpu(desc[DESC_CMDSTS]));
- local_irq_restore(flags);
+ spin_unlock_irqrestore(&dev->tx_lock, flags);
}
static void ns83820_tx_watch(unsigned long data)
);
#endif
- if (time_after(jiffies, ndev->trans_start + 1*HZ) &&
+ if (time_after(jiffies, dev_trans_start(ndev) + 1*HZ) &&
dev->tx_done_idx != dev->tx_free_idx) {
printk(KERN_DEBUG "%s: ns83820_tx_watch: %u %u %d\n",
ndev->name,
unsigned i;
for (i=0; i<3; i++) {
u32 data;
-#if 0 /* I've left this in as an example of how to use eeprom.h */
- data = eeprom_readw(&dev->ee, 0xa + 2 - i);
-#else
+
/* Read from the perfect match memory: this is loaded by
* the chip from the EEPROM via the EELOAD self test.
*/
writel(i*2, dev->base + RFCR);
data = readl(dev->base + RFDR);
-#endif
+
*mac++ = data;
*mac++ = data >> 8;
}
else
and_mask &= ~(RFCR_AAU | RFCR_AAM);
- if (ndev->flags & IFF_ALLMULTI)
+ if (ndev->flags & IFF_ALLMULTI || ndev->mc_count)
or_mask |= RFCR_AAM;
else
and_mask &= ~RFCR_AAM;
{
struct ns83820 *dev = PRIV(ndev);
int timed_out = 0;
- long start;
+ unsigned long start;
u32 status;
int loops = 0;
break;
if (status & fail)
break;
- if ((jiffies - start) >= HZ) {
+ if (time_after_eq(jiffies, start + HZ)) {
timed_out = 1;
break;
}
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(1);
+ schedule_timeout_uninterruptible(1);
}
if (status & fail)
}
#endif
-static int __devinit ns83820_init_one(struct pci_dev *pci_dev, const struct pci_device_id *id)
+static const struct net_device_ops netdev_ops = {
+ .ndo_open = ns83820_open,
+ .ndo_stop = ns83820_stop,
+ .ndo_start_xmit = ns83820_hard_start_xmit,
+ .ndo_get_stats = ns83820_get_stats,
+ .ndo_change_mtu = ns83820_change_mtu,
+ .ndo_set_multicast_list = ns83820_set_multicast,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_tx_timeout = ns83820_tx_timeout,
+#ifdef NS83820_VLAN_ACCEL_SUPPORT
+ .ndo_vlan_rx_register = ns83820_vlan_rx_register,
+#endif
+};
+
+static int __devinit ns83820_init_one(struct pci_dev *pci_dev,
+ const struct pci_device_id *id)
{
struct net_device *ndev;
struct ns83820 *dev;
int using_dac = 0;
/* See if we can set the dma mask early on; failure is fatal. */
- if (sizeof(dma_addr_t) == 8 &&
- !pci_set_dma_mask(pci_dev, 0xffffffffffffffffULL)) {
+ if (sizeof(dma_addr_t) == 8 &&
+ !pci_set_dma_mask(pci_dev, DMA_BIT_MASK(64))) {
using_dac = 1;
- } else if (!pci_set_dma_mask(pci_dev, 0xffffffff)) {
+ } else if (!pci_set_dma_mask(pci_dev, DMA_BIT_MASK(32))) {
using_dac = 0;
} else {
- printk(KERN_WARNING "ns83820.c: pci_set_dma_mask failed!\n");
+ dev_warn(&pci_dev->dev, "pci_set_dma_mask failed!\n");
return -ENODEV;
}
ndev = alloc_etherdev(sizeof(struct ns83820));
dev = PRIV(ndev);
+
err = -ENOMEM;
if (!dev)
goto out;
+ dev->ndev = ndev;
+
spin_lock_init(&dev->rx_info.lock);
spin_lock_init(&dev->tx_lock);
spin_lock_init(&dev->misc_lock);
dev->pci_dev = pci_dev;
- dev->ee.cache = &dev->MEAR_cache;
- dev->ee.lock = &dev->misc_lock;
- SET_MODULE_OWNER(ndev);
SET_NETDEV_DEV(ndev, &pci_dev->dev);
- INIT_WORK(&dev->tq_refill, queue_refill, ndev);
+ INIT_WORK(&dev->tq_refill, queue_refill);
tasklet_init(&dev->rx_tasklet, rx_action, (unsigned long)ndev);
err = pci_enable_device(pci_dev);
if (err) {
- printk(KERN_INFO "ns83820: pci_enable_dev failed: %d\n", err);
+ dev_info(&pci_dev->dev, "pci_enable_dev failed: %d\n", err);
goto out_free;
}
dev->IMR_cache = 0;
- setup_ee_mem_bitbanger(&dev->ee, dev->base + MEAR, 3, 2, 1, 0,
- 0);
-
- err = request_irq(pci_dev->irq, ns83820_irq, SA_SHIRQ,
+ err = request_irq(pci_dev->irq, ns83820_irq, IRQF_SHARED,
DRV_NAME, ndev);
if (err) {
- printk(KERN_INFO "ns83820: unable to register irq %d\n",
- pci_dev->irq);
+ dev_info(&pci_dev->dev, "unable to register irq %d, err %d\n",
+ pci_dev->irq, err);
goto out_disable;
}
rtnl_lock();
err = dev_alloc_name(ndev, ndev->name);
if (err < 0) {
- printk(KERN_INFO "ns83820: unable to get netdev name: %d\n", err);
+ dev_info(&pci_dev->dev, "unable to get netdev name: %d\n", err);
goto out_free_irq;
}
ndev->name, le32_to_cpu(readl(dev->base + 0x22c)),
pci_dev->subsystem_vendor, pci_dev->subsystem_device);
- ndev->open = ns83820_open;
- ndev->stop = ns83820_stop;
- ndev->hard_start_xmit = ns83820_hard_start_xmit;
- ndev->get_stats = ns83820_get_stats;
- ndev->change_mtu = ns83820_change_mtu;
- ndev->set_multicast_list = ns83820_set_multicast;
+ ndev->netdev_ops = &netdev_ops;
SET_ETHTOOL_OPS(ndev, &ops);
- ndev->tx_timeout = ns83820_tx_timeout;
ndev->watchdog_timeo = 5 * HZ;
pci_set_drvdata(pci_dev, ndev);
/* When compiled with 64 bit addressing, we must always enable
* the 64 bit descriptor format.
*/
- if (sizeof(dma_addr_t) == 8)
+ if (sizeof(dma_addr_t) == 8)
dev->CFG_cache |= CFG_M64ADDR;
if (using_dac)
dev->CFG_cache |= CFG_T64ADDR;
writel(dev->CFG_cache, dev->base + CFG);
}
-#if 0 /* Huh? This sets the PCI latency register. Should be done via
+#if 0 /* Huh? This sets the PCI latency register. Should be done via
* the PCI layer. FIXME.
*/
if (readl(dev->base + SRR))
* can be transmitted is 8192 - FLTH - burst size.
* If only the transmit fifo was larger...
*/
- /* Ramit : 1024 DMA is not a good idea, it ends up banging
+ /* Ramit : 1024 DMA is not a good idea, it ends up banging
* some DELL and COMPAQ SMP systems */
writel(TXCFG_CSI | TXCFG_HBI | TXCFG_ATP | TXCFG_MXDMA512
| ((1600 / 32) * 0x100),
/* Set Rx to full duplex, don't accept runt, errored, long or length
* range errored packets. Use 512 byte DMA.
*/
- /* Ramit : 1024 DMA is not a good idea, it ends up banging
- * some DELL and COMPAQ SMP systems
+ /* Ramit : 1024 DMA is not a good idea, it ends up banging
+ * some DELL and COMPAQ SMP systems
* Turn on ALP, only we are accpeting Jumbo Packets */
writel(RXCFG_AEP | RXCFG_ARP | RXCFG_AIRL | RXCFG_RX_FD
| RXCFG_STRIPCRC
* also turn on tag stripping if hardware acceleration is enabled
*/
#ifdef NS83820_VLAN_ACCEL_SUPPORT
-#define VRCR_INIT_VALUE (VRCR_IPEN|VRCR_VTDEN|VRCR_VTREN)
+#define VRCR_INIT_VALUE (VRCR_IPEN|VRCR_VTDEN|VRCR_VTREN)
#else
#define VRCR_INIT_VALUE (VRCR_IPEN|VRCR_VTDEN)
#endif
#ifdef NS83820_VLAN_ACCEL_SUPPORT
/* We also support hardware vlan acceleration */
ndev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
- ndev->vlan_rx_register = ns83820_vlan_rx_register;
- ndev->vlan_rx_kill_vid = ns83820_vlan_rx_kill_vid;
#endif
if (using_dac) {
ndev->features |= NETIF_F_HIGHDMA;
}
- printk(KERN_INFO "%s: ns83820 v" VERSION ": DP83820 v%u.%u: %02x:%02x:%02x:%02x:%02x:%02x io=0x%08lx irq=%d f=%s\n",
+ printk(KERN_INFO "%s: ns83820 v" VERSION ": DP83820 v%u.%u: %pM io=0x%08lx irq=%d f=%s\n",
ndev->name,
(unsigned)readl(dev->base + SRR) >> 8,
(unsigned)readl(dev->base + SRR) & 0xff,
- ndev->dev_addr[0], ndev->dev_addr[1],
- ndev->dev_addr[2], ndev->dev_addr[3],
- ndev->dev_addr[4], ndev->dev_addr[5],
- addr, pci_dev->irq,
+ ndev->dev_addr, addr, pci_dev->irq,
(ndev->features & NETIF_F_HIGHDMA) ? "h,sg" : "sg"
);
static int __init ns83820_init(void)
{
printk(KERN_INFO "ns83820.c: National Semiconductor DP83820 10/100/1000 driver.\n");
- return pci_module_init(&driver);
+ return pci_register_driver(&driver);
}
static void __exit ns83820_exit(void)