Setting to > 1518 effectively disables this feature. */
static int rx_copybreak;
+static int dspcfg_workaround = 1;
+
/* Used to pass the media type, etc.
Both 'options[]' and 'full_duplex[]' should exist for driver
interoperability.
#define TX_TIMEOUT (2*HZ)
#define NATSEMI_HW_TIMEOUT 400
-#define NATSEMI_TIMER_FREQ 3*HZ
+#define NATSEMI_TIMER_FREQ 5*HZ
#define NATSEMI_PG0_NREGS 64
#define NATSEMI_RFDR_NREGS 8
#define NATSEMI_PG1_NREGS 4
KERN_INFO DRV_NAME " dp8381x driver, version "
DRV_VERSION ", " DRV_RELDATE "\n"
KERN_INFO " originally by Donald Becker <becker@scyld.com>\n"
- KERN_INFO " http://www.scyld.com/network/natsemi.html\n"
KERN_INFO " 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder\n";
MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
module_param(mtu, int, 0);
module_param(debug, int, 0);
module_param(rx_copybreak, int, 0);
+module_param(dspcfg_workaround, int, 1);
module_param_array(options, int, NULL, 0);
module_param_array(full_duplex, int, NULL, 0);
MODULE_PARM_DESC(mtu, "DP8381x MTU (all boards)");
MODULE_PARM_DESC(debug, "DP8381x default debug level");
MODULE_PARM_DESC(rx_copybreak,
"DP8381x copy breakpoint for copy-only-tiny-frames");
+MODULE_PARM_DESC(dspcfg_workaround, "DP8381x: control DspCfg workaround");
MODULE_PARM_DESC(options,
"DP8381x: Bits 0-3: media type, bit 17: full duplex");
MODULE_PARM_DESC(full_duplex, "DP8381x full duplex setting(s) (1)");
/* address of a sent-in-place packet/buffer, for later free() */
struct sk_buff *tx_skbuff[TX_RING_SIZE];
dma_addr_t tx_dma[TX_RING_SIZE];
+ struct net_device *dev;
+ struct napi_struct napi;
struct net_device_stats stats;
/* Media monitoring timer */
struct timer_list timer;
u32 srr;
/* expected DSPCFG value */
u16 dspcfg;
+ int dspcfg_workaround;
/* parms saved in ethtool format */
u16 speed; /* The forced speed, 10Mb, 100Mb, gigabit */
u8 duplex; /* Duplex, half or full */
static int start_tx(struct sk_buff *skb, struct net_device *dev);
static irqreturn_t intr_handler(int irq, void *dev_instance);
static void netdev_error(struct net_device *dev, int intr_status);
-static int natsemi_poll(struct net_device *dev, int *budget);
+static int natsemi_poll(struct napi_struct *napi, int budget);
static void netdev_rx(struct net_device *dev, int *work_done, int work_to_do);
static void netdev_tx_done(struct net_device *dev);
static int natsemi_change_mtu(struct net_device *dev, int new_mtu);
static int netdev_get_eeprom(struct net_device *dev, u8 *buf);
static const struct ethtool_ops ethtool_ops;
+#define NATSEMI_ATTR(_name) \
+static ssize_t natsemi_show_##_name(struct device *dev, \
+ struct device_attribute *attr, char *buf); \
+ static ssize_t natsemi_set_##_name(struct device *dev, \
+ struct device_attribute *attr, \
+ const char *buf, size_t count); \
+ static DEVICE_ATTR(_name, 0644, natsemi_show_##_name, natsemi_set_##_name)
+
+#define NATSEMI_CREATE_FILE(_dev, _name) \
+ device_create_file(&_dev->dev, &dev_attr_##_name)
+#define NATSEMI_REMOVE_FILE(_dev, _name) \
+ device_remove_file(&_dev->dev, &dev_attr_##_name)
+
+NATSEMI_ATTR(dspcfg_workaround);
+
+static ssize_t natsemi_show_dspcfg_workaround(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct netdev_private *np = netdev_priv(to_net_dev(dev));
+
+ return sprintf(buf, "%s\n", np->dspcfg_workaround ? "on" : "off");
+}
+
+static ssize_t natsemi_set_dspcfg_workaround(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct netdev_private *np = netdev_priv(to_net_dev(dev));
+ int new_setting;
+ unsigned long flags;
+
+ /* Find out the new setting */
+ if (!strncmp("on", buf, count - 1) || !strncmp("1", buf, count - 1))
+ new_setting = 1;
+ else if (!strncmp("off", buf, count - 1)
+ || !strncmp("0", buf, count - 1))
+ new_setting = 0;
+ else
+ return count;
+
+ spin_lock_irqsave(&np->lock, flags);
+
+ np->dspcfg_workaround = new_setting;
+
+ spin_unlock_irqrestore(&np->lock, flags);
+
+ return count;
+}
+
static inline void __iomem *ns_ioaddr(struct net_device *dev)
{
return (void __iomem *) dev->base_addr;
const int pcibar = 1; /* PCI base address register */
int prev_eedata;
u32 tmp;
+ DECLARE_MAC_BUF(mac);
/* when built into the kernel, we only print version if device is found */
#ifndef MODULE
dev = alloc_etherdev(sizeof (struct netdev_private));
if (!dev)
return -ENOMEM;
- SET_MODULE_OWNER(dev);
SET_NETDEV_DEV(dev, &pdev->dev);
i = pci_request_regions(pdev, DRV_NAME);
dev->irq = irq;
np = netdev_priv(dev);
+ netif_napi_add(dev, &np->napi, natsemi_poll, 64);
+ np->dev = dev;
np->pci_dev = pdev;
pci_set_drvdata(pdev, dev);
np->ignore_phy = 1;
else
np->ignore_phy = 0;
+ np->dspcfg_workaround = dspcfg_workaround;
/* Initial port:
* - If configured to ignore the PHY set up for external.
dev->do_ioctl = &netdev_ioctl;
dev->tx_timeout = &tx_timeout;
dev->watchdog_timeo = TX_TIMEOUT;
- dev->poll = natsemi_poll;
- dev->weight = 64;
#ifdef CONFIG_NET_POLL_CONTROLLER
dev->poll_controller = &natsemi_poll_controller;
if (i)
goto err_register_netdev;
+ if (NATSEMI_CREATE_FILE(pdev, dspcfg_workaround))
+ goto err_create_file;
+
if (netif_msg_drv(np)) {
- printk(KERN_INFO "natsemi %s: %s at %#08lx (%s), ",
- dev->name, natsemi_pci_info[chip_idx].name, iostart,
- pci_name(np->pci_dev));
- for (i = 0; i < ETH_ALEN-1; i++)
- printk("%02x:", dev->dev_addr[i]);
- printk("%02x, IRQ %d", dev->dev_addr[i], irq);
+ printk(KERN_INFO "natsemi %s: %s at %#08lx "
+ "(%s), %s, IRQ %d",
+ dev->name, natsemi_pci_info[chip_idx].name, iostart,
+ pci_name(np->pci_dev), print_mac(mac, dev->dev_addr), irq);
if (dev->if_port == PORT_TP)
printk(", port TP.\n");
else if (np->ignore_phy)
}
return 0;
+ err_create_file:
+ unregister_netdev(dev);
+
err_register_netdev:
iounmap(ioaddr);
a delay. Note that pre-2.0.34 kernels had a cache-alignment bug that
made udelay() unreliable.
The old method of using an ISA access as a delay, __SLOW_DOWN_IO__, is
- depricated.
+ deprecated.
*/
#define eeprom_delay(ee_addr) readl(ee_addr)
free_irq(dev->irq, dev);
return i;
}
+ napi_enable(&np->napi);
+
init_ring(dev);
spin_lock_irq(&np->lock);
init_registers(dev);
/* Set the timer to check for link beat. */
init_timer(&np->timer);
- np->timer.expires = jiffies + NATSEMI_TIMER_FREQ;
+ np->timer.expires = round_jiffies(jiffies + NATSEMI_TIMER_FREQ);
np->timer.data = (unsigned long)dev;
np->timer.function = &netdev_timer; /* timer handler */
add_timer(&np->timer);
* (these values all come from National)
*/
if (!(data & 0x80) || ((data >= 0xd8) && (data <= 0xff))) {
- struct netdev_private *np = netdev_priv(dev);
+ np = netdev_priv(dev);
/* the bug has been triggered - fix the coefficient */
writew(TSTDAT_FIXED, ioaddr + TSTDAT);
/* Enable interrupts by setting the interrupt mask. */
writel(DEFAULT_INTR, ioaddr + IntrMask);
- writel(1, ioaddr + IntrEnable);
+ natsemi_irq_enable(dev);
writel(RxOn | TxOn, ioaddr + ChipCmd);
writel(StatsClear, ioaddr + StatsCtrl); /* Clear Stats */
* It seems that a reference set for this chip went out with incorrect info,
* and there exist boards that aren't quite right. An unexpected voltage
* drop can cause the PHY to get itself in a weird state (basically reset).
- * NOTE: this only seems to affect revC chips.
+ * NOTE: this only seems to affect revC chips. The user can disable
+ * this check via dspcfg_workaround sysfs option.
* 3) check of death of the RX path due to OOM
*/
static void netdev_timer(unsigned long data)
struct net_device *dev = (struct net_device *)data;
struct netdev_private *np = netdev_priv(dev);
void __iomem * ioaddr = ns_ioaddr(dev);
- int next_tick = 5*HZ;
+ int next_tick = NATSEMI_TIMER_FREQ;
if (netif_msg_timer(np)) {
/* DO NOT read the IntrStatus register,
writew(1, ioaddr+PGSEL);
dspcfg = readw(ioaddr+DSPCFG);
writew(0, ioaddr+PGSEL);
- if (dspcfg != np->dspcfg) {
+ if (np->dspcfg_workaround && dspcfg != np->dspcfg) {
if (!netif_queue_stopped(dev)) {
spin_unlock_irq(&np->lock);
- if (netif_msg_hw(np))
+ if (netif_msg_drv(np))
printk(KERN_NOTICE "%s: possible phy reset: "
"re-initializing\n", dev->name);
disable_irq(dev->irq);
next_tick = 1;
}
}
- mod_timer(&np->timer, jiffies + next_tick);
+
+ if (next_tick > 1)
+ mod_timer(&np->timer, round_jiffies(jiffies + next_tick));
+ else
+ mod_timer(&np->timer, jiffies + next_tick);
}
static void dump_ring(struct net_device *dev)
struct netdev_private *np = netdev_priv(dev);
void __iomem * ioaddr = ns_ioaddr(dev);
unsigned entry;
+ unsigned long flags;
/* Note: Ordering is important here, set the field with the
"ownership" bit last, and only then increment cur_tx. */
np->tx_ring[entry].addr = cpu_to_le32(np->tx_dma[entry]);
- spin_lock_irq(&np->lock);
+ spin_lock_irqsave(&np->lock, flags);
if (!np->hands_off) {
np->tx_ring[entry].cmd_status = cpu_to_le32(DescOwn | skb->len);
dev_kfree_skb_irq(skb);
np->stats.tx_dropped++;
}
- spin_unlock_irq(&np->lock);
+ spin_unlock_irqrestore(&np->lock, flags);
dev->trans_start = jiffies;
struct netdev_private *np = netdev_priv(dev);
void __iomem * ioaddr = ns_ioaddr(dev);
- if (np->hands_off)
+ /* Reading IntrStatus automatically acknowledges so don't do
+ * that while interrupts are disabled, (for example, while a
+ * poll is scheduled). */
+ if (np->hands_off || !readl(ioaddr + IntrEnable))
return IRQ_NONE;
- /* Reading automatically acknowledges. */
np->intr_status = readl(ioaddr + IntrStatus);
+ if (!np->intr_status)
+ return IRQ_NONE;
+
if (netif_msg_intr(np))
printk(KERN_DEBUG
"%s: Interrupt, status %#08x, mask %#08x.\n",
dev->name, np->intr_status,
readl(ioaddr + IntrMask));
- if (!np->intr_status)
- return IRQ_NONE;
-
prefetch(&np->rx_skbuff[np->cur_rx % RX_RING_SIZE]);
- if (netif_rx_schedule_prep(dev)) {
+ if (netif_rx_schedule_prep(dev, &np->napi)) {
/* Disable interrupts and register for poll */
natsemi_irq_disable(dev);
- __netif_rx_schedule(dev);
- }
+ __netif_rx_schedule(dev, &np->napi);
+ } else
+ printk(KERN_WARNING
+ "%s: Ignoring interrupt, status %#08x, mask %#08x.\n",
+ dev->name, np->intr_status,
+ readl(ioaddr + IntrMask));
+
return IRQ_HANDLED;
}
/* This is the NAPI poll routine. As well as the standard RX handling
* it also handles all other interrupts that the chip might raise.
*/
-static int natsemi_poll(struct net_device *dev, int *budget)
+static int natsemi_poll(struct napi_struct *napi, int budget)
{
- struct netdev_private *np = netdev_priv(dev);
+ struct netdev_private *np = container_of(napi, struct netdev_private, napi);
+ struct net_device *dev = np->dev;
void __iomem * ioaddr = ns_ioaddr(dev);
-
- int work_to_do = min(*budget, dev->quota);
int work_done = 0;
do {
+ if (netif_msg_intr(np))
+ printk(KERN_DEBUG
+ "%s: Poll, status %#08x, mask %#08x.\n",
+ dev->name, np->intr_status,
+ readl(ioaddr + IntrMask));
+
+ /* netdev_rx() may read IntrStatus again if the RX state
+ * machine falls over so do it first. */
+ if (np->intr_status &
+ (IntrRxDone | IntrRxIntr | RxStatusFIFOOver |
+ IntrRxErr | IntrRxOverrun)) {
+ netdev_rx(dev, &work_done, budget);
+ }
+
if (np->intr_status &
(IntrTxDone | IntrTxIntr | IntrTxIdle | IntrTxErr)) {
spin_lock(&np->lock);
if (np->intr_status & IntrAbnormalSummary)
netdev_error(dev, np->intr_status);
- if (np->intr_status &
- (IntrRxDone | IntrRxIntr | RxStatusFIFOOver |
- IntrRxErr | IntrRxOverrun)) {
- netdev_rx(dev, &work_done, work_to_do);
- }
-
- *budget -= work_done;
- dev->quota -= work_done;
-
- if (work_done >= work_to_do)
- return 1;
+ if (work_done >= budget)
+ return work_done;
np->intr_status = readl(ioaddr + IntrStatus);
} while (np->intr_status);
- netif_rx_complete(dev);
+ netif_rx_complete(dev, napi);
/* Reenable interrupts providing nothing is trying to shut
* the chip down. */
spin_lock(&np->lock);
- if (!np->hands_off && netif_running(dev))
+ if (!np->hands_off)
natsemi_irq_enable(dev);
spin_unlock(&np->lock);
- return 0;
+ return work_done;
}
/* This routine is logically part of the interrupt handler, but separated
pkt_len = (desc_status & DescSizeMask) - 4;
if ((desc_status&(DescMore|DescPktOK|DescRxLong)) != DescPktOK){
if (desc_status & DescMore) {
+ unsigned long flags;
+
if (netif_msg_rx_err(np))
printk(KERN_WARNING
"%s: Oversized(?) Ethernet "
* reset procedure documented in
* AN-1287. */
- spin_lock_irq(&np->lock);
+ spin_lock_irqsave(&np->lock, flags);
reset_rx(dev);
reinit_rx(dev);
writel(np->ring_dma, ioaddr + RxRingPtr);
check_link(dev);
- spin_unlock_irq(&np->lock);
+ spin_unlock_irqrestore(&np->lock, flags);
/* We'll enable RX on exit from this
* function. */
* without copying to a minimally-sized skbuff. */
if (pkt_len < rx_copybreak
&& (skb = dev_alloc_skb(pkt_len + RX_OFFSET)) != NULL) {
- skb->dev = dev;
/* 16 byte align the IP header */
skb_reserve(skb, RX_OFFSET);
pci_dma_sync_single_for_cpu(np->pci_dev,
np->rx_dma[entry],
buflen,
PCI_DMA_FROMDEVICE);
- eth_copy_and_sum(skb,
- np->rx_skbuff[entry]->data, pkt_len, 0);
+ skb_copy_to_linear_data(skb,
+ np->rx_skbuff[entry]->data, pkt_len);
skb_put(skb, pkt_len);
pci_dma_sync_single_for_device(np->pci_dev,
np->rx_dma[entry],
dev->name);
}
np->stats.rx_fifo_errors++;
+ np->stats.rx_errors++;
}
/* Hmmmmm, it's not clear how to recover from PCI faults. */
if (intr_status & IntrPCIErr) {
printk(KERN_NOTICE "%s: PCI error %#08x\n", dev->name,
intr_status & IntrPCIErr);
np->stats.tx_fifo_errors++;
+ np->stats.tx_errors++;
np->stats.rx_fifo_errors++;
+ np->stats.rx_errors++;
}
spin_unlock(&np->lock);
}
memset(mc_filter, 0, sizeof(mc_filter));
for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
i++, mclist = mclist->next) {
- int i = (ether_crc(ETH_ALEN, mclist->dmi_addr) >> 23) & 0x1ff;
- mc_filter[i/8] |= (1 << (i & 0x07));
+ int b = (ether_crc(ETH_ALEN, mclist->dmi_addr) >> 23) & 0x1ff;
+ mc_filter[b/8] |= (1 << (b & 0x07));
}
rx_mode = RxFilterEnable | AcceptBroadcast
| AcceptMulticast | AcceptMyPhys;
* Could be used to send a netlink message.
*/
writel(WOLPkt | LinkChange, ioaddr + IntrMask);
- writel(1, ioaddr + IntrEnable);
+ natsemi_irq_enable(dev);
}
}
dev->name, np->cur_tx, np->dirty_tx,
np->cur_rx, np->dirty_rx);
+ napi_disable(&np->napi);
+
/*
* FIXME: what if someone tries to close a device
* that is suspended?
struct net_device *dev = pci_get_drvdata(pdev);
void __iomem * ioaddr = ns_ioaddr(dev);
+ NATSEMI_REMOVE_FILE(pdev, dspcfg_workaround);
unregister_netdev (dev);
pci_release_regions (pdev);
iounmap(ioaddr);
* disable_irq() to enforce synchronization.
* * natsemi_poll: checks before reenabling interrupts. suspend
* sets hands_off, disables interrupts and then waits with
- * netif_poll_disable().
+ * napi_disable().
*
* Interrupts must be disabled, otherwise hands_off can cause irq storms.
*/
disable_irq(dev->irq);
spin_lock_irq(&np->lock);
- writel(0, ioaddr + IntrEnable);
+ natsemi_irq_disable(dev);
np->hands_off = 1;
natsemi_stop_rxtx(dev);
netif_stop_queue(dev);
spin_unlock_irq(&np->lock);
enable_irq(dev->irq);
- netif_poll_disable(dev);
+ napi_disable(&np->napi);
/* Update the error counts. */
__get_stats(dev);
{
struct net_device *dev = pci_get_drvdata (pdev);
struct netdev_private *np = netdev_priv(dev);
+ int ret = 0;
rtnl_lock();
if (netif_device_present(dev))
goto out;
if (netif_running(dev)) {
BUG_ON(!np->hands_off);
- pci_enable_device(pdev);
+ ret = pci_enable_device(pdev);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "pci_enable_device() failed: %d\n", ret);
+ goto out;
+ }
/* pci_power_on(pdev); */
+ napi_enable(&np->napi);
+
natsemi_reset(dev);
init_ring(dev);
disable_irq(dev->irq);
spin_unlock_irq(&np->lock);
enable_irq(dev->irq);
- mod_timer(&np->timer, jiffies + 1*HZ);
+ mod_timer(&np->timer, round_jiffies(jiffies + 1*HZ));
}
netif_device_attach(dev);
- netif_poll_enable(dev);
out:
rtnl_unlock();
- return 0;
+ return ret;
}
#endif /* CONFIG_PM */
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff