Setting to > 1518 effectively disables this feature. */
static int rx_copybreak;
+static int dspcfg_workaround = 1;
+
/* Used to pass the media type, etc.
Both 'options[]' and 'full_duplex[]' should exist for driver
interoperability.
KERN_INFO DRV_NAME " dp8381x driver, version "
DRV_VERSION ", " DRV_RELDATE "\n"
KERN_INFO " originally by Donald Becker <becker@scyld.com>\n"
- KERN_INFO " http://www.scyld.com/network/natsemi.html\n"
KERN_INFO " 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder\n";
MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
module_param(mtu, int, 0);
module_param(debug, int, 0);
module_param(rx_copybreak, int, 0);
+module_param(dspcfg_workaround, int, 1);
module_param_array(options, int, NULL, 0);
module_param_array(full_duplex, int, NULL, 0);
MODULE_PARM_DESC(mtu, "DP8381x MTU (all boards)");
MODULE_PARM_DESC(debug, "DP8381x default debug level");
MODULE_PARM_DESC(rx_copybreak,
"DP8381x copy breakpoint for copy-only-tiny-frames");
+MODULE_PARM_DESC(dspcfg_workaround, "DP8381x: control DspCfg workaround");
MODULE_PARM_DESC(options,
"DP8381x: Bits 0-3: media type, bit 17: full duplex");
MODULE_PARM_DESC(full_duplex, "DP8381x full duplex setting(s) (1)");
u32 srr;
/* expected DSPCFG value */
u16 dspcfg;
+ int dspcfg_workaround;
/* parms saved in ethtool format */
u16 speed; /* The forced speed, 10Mb, 100Mb, gigabit */
u8 duplex; /* Duplex, half or full */
static int netdev_get_eeprom(struct net_device *dev, u8 *buf);
static const struct ethtool_ops ethtool_ops;
+#define NATSEMI_ATTR(_name) \
+static ssize_t natsemi_show_##_name(struct device *dev, \
+ struct device_attribute *attr, char *buf); \
+ static ssize_t natsemi_set_##_name(struct device *dev, \
+ struct device_attribute *attr, \
+ const char *buf, size_t count); \
+ static DEVICE_ATTR(_name, 0644, natsemi_show_##_name, natsemi_set_##_name)
+
+#define NATSEMI_CREATE_FILE(_dev, _name) \
+ device_create_file(&_dev->dev, &dev_attr_##_name)
+#define NATSEMI_REMOVE_FILE(_dev, _name) \
+ device_remove_file(&_dev->dev, &dev_attr_##_name)
+
+NATSEMI_ATTR(dspcfg_workaround);
+
+static ssize_t natsemi_show_dspcfg_workaround(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct netdev_private *np = netdev_priv(to_net_dev(dev));
+
+ return sprintf(buf, "%s\n", np->dspcfg_workaround ? "on" : "off");
+}
+
+static ssize_t natsemi_set_dspcfg_workaround(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct netdev_private *np = netdev_priv(to_net_dev(dev));
+ int new_setting;
+ unsigned long flags;
+
+ /* Find out the new setting */
+ if (!strncmp("on", buf, count - 1) || !strncmp("1", buf, count - 1))
+ new_setting = 1;
+ else if (!strncmp("off", buf, count - 1)
+ || !strncmp("0", buf, count - 1))
+ new_setting = 0;
+ else
+ return count;
+
+ spin_lock_irqsave(&np->lock, flags);
+
+ np->dspcfg_workaround = new_setting;
+
+ spin_unlock_irqrestore(&np->lock, flags);
+
+ return count;
+}
+
static inline void __iomem *ns_ioaddr(struct net_device *dev)
{
return (void __iomem *) dev->base_addr;
np->ignore_phy = 1;
else
np->ignore_phy = 0;
+ np->dspcfg_workaround = dspcfg_workaround;
/* Initial port:
* - If configured to ignore the PHY set up for external.
if (i)
goto err_register_netdev;
+ if (NATSEMI_CREATE_FILE(pdev, dspcfg_workaround))
+ goto err_create_file;
+
if (netif_msg_drv(np)) {
printk(KERN_INFO "natsemi %s: %s at %#08lx (%s), ",
dev->name, natsemi_pci_info[chip_idx].name, iostart,
}
return 0;
+ err_create_file:
+ unregister_netdev(dev);
+
err_register_netdev:
iounmap(ioaddr);
/* Enable interrupts by setting the interrupt mask. */
writel(DEFAULT_INTR, ioaddr + IntrMask);
- writel(1, ioaddr + IntrEnable);
+ natsemi_irq_enable(dev);
writel(RxOn | TxOn, ioaddr + ChipCmd);
writel(StatsClear, ioaddr + StatsCtrl); /* Clear Stats */
* It seems that a reference set for this chip went out with incorrect info,
* and there exist boards that aren't quite right. An unexpected voltage
* drop can cause the PHY to get itself in a weird state (basically reset).
- * NOTE: this only seems to affect revC chips.
+ * NOTE: this only seems to affect revC chips. The user can disable
+ * this check via dspcfg_workaround sysfs option.
* 3) check of death of the RX path due to OOM
*/
static void netdev_timer(unsigned long data)
writew(1, ioaddr+PGSEL);
dspcfg = readw(ioaddr+DSPCFG);
writew(0, ioaddr+PGSEL);
- if (dspcfg != np->dspcfg) {
+ if (np->dspcfg_workaround && dspcfg != np->dspcfg) {
if (!netif_queue_stopped(dev)) {
spin_unlock_irq(&np->lock);
- if (netif_msg_hw(np))
+ if (netif_msg_drv(np))
printk(KERN_NOTICE "%s: possible phy reset: "
"re-initializing\n", dev->name);
disable_irq(dev->irq);
struct netdev_private *np = netdev_priv(dev);
void __iomem * ioaddr = ns_ioaddr(dev);
unsigned entry;
+ unsigned long flags;
/* Note: Ordering is important here, set the field with the
"ownership" bit last, and only then increment cur_tx. */
np->tx_ring[entry].addr = cpu_to_le32(np->tx_dma[entry]);
- spin_lock_irq(&np->lock);
+ spin_lock_irqsave(&np->lock, flags);
if (!np->hands_off) {
np->tx_ring[entry].cmd_status = cpu_to_le32(DescOwn | skb->len);
dev_kfree_skb_irq(skb);
np->stats.tx_dropped++;
}
- spin_unlock_irq(&np->lock);
+ spin_unlock_irqrestore(&np->lock, flags);
dev->trans_start = jiffies;
struct netdev_private *np = netdev_priv(dev);
void __iomem * ioaddr = ns_ioaddr(dev);
- if (np->hands_off)
+ /* Reading IntrStatus automatically acknowledges so don't do
+ * that while interrupts are disabled, (for example, while a
+ * poll is scheduled). */
+ if (np->hands_off || !readl(ioaddr + IntrEnable))
return IRQ_NONE;
- /* Reading automatically acknowledges. */
np->intr_status = readl(ioaddr + IntrStatus);
+ if (!np->intr_status)
+ return IRQ_NONE;
+
if (netif_msg_intr(np))
printk(KERN_DEBUG
"%s: Interrupt, status %#08x, mask %#08x.\n",
dev->name, np->intr_status,
readl(ioaddr + IntrMask));
- if (!np->intr_status)
- return IRQ_NONE;
-
prefetch(&np->rx_skbuff[np->cur_rx % RX_RING_SIZE]);
if (netif_rx_schedule_prep(dev)) {
/* Disable interrupts and register for poll */
natsemi_irq_disable(dev);
__netif_rx_schedule(dev);
- }
+ } else
+ printk(KERN_WARNING
+ "%s: Ignoring interrupt, status %#08x, mask %#08x.\n",
+ dev->name, np->intr_status,
+ readl(ioaddr + IntrMask));
+
return IRQ_HANDLED;
}
int work_done = 0;
do {
+ if (netif_msg_intr(np))
+ printk(KERN_DEBUG
+ "%s: Poll, status %#08x, mask %#08x.\n",
+ dev->name, np->intr_status,
+ readl(ioaddr + IntrMask));
+
+ /* netdev_rx() may read IntrStatus again if the RX state
+ * machine falls over so do it first. */
+ if (np->intr_status &
+ (IntrRxDone | IntrRxIntr | RxStatusFIFOOver |
+ IntrRxErr | IntrRxOverrun)) {
+ netdev_rx(dev, &work_done, work_to_do);
+ }
+
if (np->intr_status &
(IntrTxDone | IntrTxIntr | IntrTxIdle | IntrTxErr)) {
spin_lock(&np->lock);
if (np->intr_status & IntrAbnormalSummary)
netdev_error(dev, np->intr_status);
- if (np->intr_status &
- (IntrRxDone | IntrRxIntr | RxStatusFIFOOver |
- IntrRxErr | IntrRxOverrun)) {
- netdev_rx(dev, &work_done, work_to_do);
- }
-
*budget -= work_done;
dev->quota -= work_done;
pkt_len = (desc_status & DescSizeMask) - 4;
if ((desc_status&(DescMore|DescPktOK|DescRxLong)) != DescPktOK){
if (desc_status & DescMore) {
+ unsigned long flags;
+
if (netif_msg_rx_err(np))
printk(KERN_WARNING
"%s: Oversized(?) Ethernet "
* reset procedure documented in
* AN-1287. */
- spin_lock_irq(&np->lock);
+ spin_lock_irqsave(&np->lock, flags);
reset_rx(dev);
reinit_rx(dev);
writel(np->ring_dma, ioaddr + RxRingPtr);
check_link(dev);
- spin_unlock_irq(&np->lock);
+ spin_unlock_irqrestore(&np->lock, flags);
/* We'll enable RX on exit from this
* function. */
* without copying to a minimally-sized skbuff. */
if (pkt_len < rx_copybreak
&& (skb = dev_alloc_skb(pkt_len + RX_OFFSET)) != NULL) {
- skb->dev = dev;
/* 16 byte align the IP header */
skb_reserve(skb, RX_OFFSET);
pci_dma_sync_single_for_cpu(np->pci_dev,
np->rx_dma[entry],
buflen,
PCI_DMA_FROMDEVICE);
- eth_copy_and_sum(skb,
- np->rx_skbuff[entry]->data, pkt_len, 0);
+ skb_copy_to_linear_data(skb,
+ np->rx_skbuff[entry]->data, pkt_len);
skb_put(skb, pkt_len);
pci_dma_sync_single_for_device(np->pci_dev,
np->rx_dma[entry],
dev->name);
}
np->stats.rx_fifo_errors++;
+ np->stats.rx_errors++;
}
/* Hmmmmm, it's not clear how to recover from PCI faults. */
if (intr_status & IntrPCIErr) {
printk(KERN_NOTICE "%s: PCI error %#08x\n", dev->name,
intr_status & IntrPCIErr);
np->stats.tx_fifo_errors++;
+ np->stats.tx_errors++;
np->stats.rx_fifo_errors++;
+ np->stats.rx_errors++;
}
spin_unlock(&np->lock);
}
* Could be used to send a netlink message.
*/
writel(WOLPkt | LinkChange, ioaddr + IntrMask);
- writel(1, ioaddr + IntrEnable);
+ natsemi_irq_enable(dev);
}
}
struct net_device *dev = pci_get_drvdata(pdev);
void __iomem * ioaddr = ns_ioaddr(dev);
+ NATSEMI_REMOVE_FILE(pdev, dspcfg_workaround);
unregister_netdev (dev);
pci_release_regions (pdev);
iounmap(ioaddr);
disable_irq(dev->irq);
spin_lock_irq(&np->lock);
- writel(0, ioaddr + IntrEnable);
+ natsemi_irq_disable(dev);
np->hands_off = 1;
natsemi_stop_rxtx(dev);
netif_stop_queue(dev);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff