#include <asm/auxio.h>
#include <asm/pgtable.h>
#include <asm/irq.h>
-#include <asm/checksum.h>
#include "myri_sbus.h"
#include "myri_code.h"
myri_disable_irq(mp->lregs, cregs);
- while (tick++ <= 25) {
+ while (tick++ < 25) {
u32 softstate;
/* Wake it up. */
return 0;
}
-static int myri_load_lanai(struct myri_eth *mp)
+static int __devinit myri_load_lanai(struct myri_eth *mp)
{
struct net_device *dev = mp->dev;
struct myri_shmem __iomem *shmem = mp->shmem;
#ifdef DEBUG_HEADER
static void dump_ehdr(struct ethhdr *ehdr)
{
- printk("ehdr[h_dst(%02x:%02x:%02x:%02x:%02x:%02x)"
- "h_source(%02x:%02x:%02x:%02x:%02x:%02x)h_proto(%04x)]\n",
- ehdr->h_dest[0], ehdr->h_dest[1], ehdr->h_dest[2],
- ehdr->h_dest[3], ehdr->h_dest[4], ehdr->h_dest[4],
- ehdr->h_source[0], ehdr->h_source[1], ehdr->h_source[2],
- ehdr->h_source[3], ehdr->h_source[4], ehdr->h_source[4],
+ DECLARE_MAC_BUF(mac);
+ DECLARE_MAC_BUF(mac2);
+ printk("ehdr[h_dst(%s)"
+ "h_source(%s)"
+ "h_proto(%04x)]\n",
+ print_mac(mac, ehdr->h_dest), print_mac(mac2, ehdr->h_source),
ehdr->h_proto);
}
struct ethhdr *ehdr = (struct ethhdr *) (stuff + 2);
printk("pad[%02x:%02x]", stuff[0], stuff[1]);
- printk("ehdr[h_dst(%02x:%02x:%02x:%02x:%02x:%02x)"
- "h_source(%02x:%02x:%02x:%02x:%02x:%02x)h_proto(%04x)]\n",
- ehdr->h_dest[0], ehdr->h_dest[1], ehdr->h_dest[2],
- ehdr->h_dest[3], ehdr->h_dest[4], ehdr->h_dest[4],
- ehdr->h_source[0], ehdr->h_source[1], ehdr->h_source[2],
- ehdr->h_source[3], ehdr->h_source[4], ehdr->h_source[4],
- ehdr->h_proto);
+ dump_ehdr(ehdr);
}
#endif
sbus_unmap_single(mp->myri_sdev, dma_addr, skb->len, SBUS_DMA_TODEVICE);
dev_kfree_skb(skb);
mp->tx_skbs[entry] = NULL;
- mp->enet_stats.tx_packets++;
+ dev->stats.tx_packets++;
entry = NEXT_TX(entry);
}
mp->tx_old = entry;
}
-/* Determine the packet's protocol ID. The rule here is that we
+/* Determine the packet's protocol ID. The rule here is that we
* assume 802.3 if the type field is short enough to be a length.
* This is normal practice and works for any 'now in use' protocol.
*/
{
struct ethhdr *eth;
unsigned char *rawp;
-
- skb->mac.raw = (((unsigned char *)skb->data) + MYRI_PAD_LEN);
+
+ skb_set_mac_header(skb, MYRI_PAD_LEN);
skb_pull(skb, dev->hard_header_len);
eth = eth_hdr(skb);
-
+
#ifdef DEBUG_HEADER
DHDR(("myri_type_trans: "));
dump_ehdr(eth);
if (memcmp(eth->h_dest, dev->dev_addr, ETH_ALEN))
skb->pkt_type = PACKET_OTHERHOST;
}
-
+
if (ntohs(eth->h_proto) >= 1536)
return eth->h_proto;
-
+
rawp = skb->data;
-
+
/* This is a magic hack to spot IPX packets. Older Novell breaks
* the protocol design and runs IPX over 802.3 without an 802.2 LLC
* layer. We look for FFFF which isn't a used 802.2 SSAP/DSAP. This
*/
if (*(unsigned short *)rawp == 0xFFFF)
return htons(ETH_P_802_3);
-
+
/* Real 802.2 LLC */
return htons(ETH_P_802_2);
}
RX_ALLOC_SIZE, SBUS_DMA_FROMDEVICE);
if (len < (ETH_HLEN + MYRI_PAD_LEN) || (skb->data[0] != MYRI_PAD_LEN)) {
DRX(("ERROR["));
- mp->enet_stats.rx_errors++;
+ dev->stats.rx_errors++;
if (len < (ETH_HLEN + MYRI_PAD_LEN)) {
DRX(("BAD_LENGTH] "));
- mp->enet_stats.rx_length_errors++;
+ dev->stats.rx_length_errors++;
} else {
DRX(("NO_PADDING] "));
- mp->enet_stats.rx_frame_errors++;
+ dev->stats.rx_frame_errors++;
}
/* Return it to the LANAI. */
drop_it:
drops++;
DRX(("DROP "));
- mp->enet_stats.rx_dropped++;
+ dev->stats.rx_dropped++;
sbus_dma_sync_single_for_device(mp->myri_sdev,
sbus_readl(&rxd->myri_scatters[0].addr),
RX_ALLOC_SIZE,
copy_skb->dev = dev;
DRX(("resv_and_put "));
skb_put(copy_skb, len);
- memcpy(copy_skb->data, skb->data, len);
+ skb_copy_from_linear_data(skb, copy_skb->data, len);
/* Reuse original ring buffer. */
DRX(("reuse "));
netif_rx(skb);
dev->last_rx = jiffies;
- mp->enet_stats.rx_packets++;
- mp->enet_stats.rx_bytes += len;
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += len;
next:
DRX(("NEXT\n"));
entry = NEXT_RX(entry);
}
}
-static irqreturn_t myri_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t myri_interrupt(int irq, void *dev_id)
{
struct net_device *dev = (struct net_device *) dev_id;
struct myri_eth *mp = (struct myri_eth *) dev->priv;
printk(KERN_ERR "%s: transmit timed out, resetting\n", dev->name);
- mp->enet_stats.tx_errors++;
+ dev->stats.tx_errors++;
myri_init(mp, 0);
netif_wake_queue(dev);
}
return 0;
}
-/* Create the MyriNet MAC header for an arbitrary protocol layer
+/* Create the MyriNet MAC header for an arbitrary protocol layer
*
* saddr=NULL means use device source address
* daddr=NULL means leave destination address (eg unresolved arp)
*/
-static int myri_header(struct sk_buff *skb, struct net_device *dev, unsigned short type,
- void *daddr, void *saddr, unsigned len)
+static int myri_header(struct sk_buff *skb, struct net_device *dev,
+ unsigned short type, const void *daddr,
+ const void *saddr, unsigned len)
{
struct ethhdr *eth = (struct ethhdr *) skb_push(skb, ETH_HLEN);
unsigned char *pad = (unsigned char *) skb_push(skb, MYRI_PAD_LEN);
/* Set the protocol type. For a packet of type ETH_P_802_3 we put the length
* in here instead. It is up to the 802.2 layer to carry protocol information.
*/
- if (type != ETH_P_802_3)
+ if (type != ETH_P_802_3)
eth->h_proto = htons(type);
else
eth->h_proto = htons(len);
eth->h_dest[i] = 0;
return(dev->hard_header_len);
}
-
+
if (daddr) {
memcpy(eth->h_dest, daddr, dev->addr_len);
return dev->hard_header_len;
#endif
default:
- printk(KERN_DEBUG
- "%s: unable to resolve type %X addresses.\n",
+ printk(KERN_DEBUG
+ "%s: unable to resolve type %X addresses.\n",
dev->name, (int)eth->h_proto);
-
+
memcpy(eth->h_source, dev->dev_addr, dev->addr_len);
return 0;
break;
}
- return 0;
+ return 0;
}
-int myri_header_cache(struct neighbour *neigh, struct hh_cache *hh)
+static int myri_header_cache(const struct neighbour *neigh, struct hh_cache *hh)
{
unsigned short type = hh->hh_type;
unsigned char *pad;
struct ethhdr *eth;
- struct net_device *dev = neigh->dev;
+ const struct net_device *dev = neigh->dev;
pad = ((unsigned char *) hh->hh_data) +
HH_DATA_OFF(sizeof(*eth) + MYRI_PAD_LEN);
eth = (struct ethhdr *) (pad + MYRI_PAD_LEN);
- if (type == __constant_htons(ETH_P_802_3))
+ if (type == htons(ETH_P_802_3))
return -1;
/* Refill MyriNet padding identifiers, this is just being anal. */
/* Called by Address Resolution module to notify changes in address. */
-void myri_header_cache_update(struct hh_cache *hh, struct net_device *dev, unsigned char * haddr)
+void myri_header_cache_update(struct hh_cache *hh,
+ const struct net_device *dev,
+ const unsigned char * haddr)
{
memcpy(((u8*)hh->hh_data) + HH_DATA_OFF(sizeof(struct ethhdr)),
haddr, dev->addr_len);
return 0;
}
-static struct net_device_stats *myri_get_stats(struct net_device *dev)
-{ return &(((struct myri_eth *)dev->priv)->enet_stats); }
-
static void myri_set_multicast(struct net_device *dev)
{
/* Do nothing, all MyriCOM nodes transmit multicast frames
}
#endif
-static int __init myri_ether_init(struct sbus_dev *sdev)
+static const struct header_ops myri_header_ops = {
+ .create = myri_header,
+ .rebuild = myri_rebuild_header,
+ .cache = myri_header_cache,
+ .cache_update = myri_header_cache_update,
+};
+
+static int __devinit myri_ether_init(struct sbus_dev *sdev)
{
static int num;
static unsigned version_printed;
struct myri_eth *mp;
unsigned char prop_buf[32];
int i;
+ DECLARE_MAC_BUF(mac);
DET(("myri_ether_init(%p,%d):\n", sdev, num));
dev = alloc_etherdev(sizeof(struct myri_eth));
if (version_printed++ == 0)
printk(version);
- SET_MODULE_OWNER(dev);
SET_NETDEV_DEV(dev, &sdev->ofdev.dev);
mp = (struct myri_eth *) dev->priv;
dev->hard_start_xmit = &myri_start_xmit;
dev->tx_timeout = &myri_tx_timeout;
dev->watchdog_timeo = 5*HZ;
- dev->get_stats = &myri_get_stats;
dev->set_multicast_list = &myri_set_multicast;
dev->irq = sdev->irqs[0];
/* Register interrupt handler now. */
DET(("Requesting MYRIcom IRQ line.\n"));
if (request_irq(dev->irq, &myri_interrupt,
- SA_SHIRQ, "MyriCOM Ethernet", (void *) dev)) {
+ IRQF_SHARED, "MyriCOM Ethernet", (void *) dev)) {
printk("MyriCOM: Cannot register interrupt handler.\n");
goto err;
}
dev->mtu = MYRINET_MTU;
dev->change_mtu = myri_change_mtu;
- dev->hard_header = myri_header;
- dev->rebuild_header = myri_rebuild_header;
+ dev->header_ops = &myri_header_ops;
+
dev->hard_header_len = (ETH_HLEN + MYRI_PAD_LEN);
- dev->hard_header_cache = myri_header_cache;
- dev->header_cache_update= myri_header_cache_update;
/* Load code onto the LANai. */
DET(("Loading LANAI firmware\n"));
num++;
- printk("%s: MyriCOM MyriNET Ethernet ", dev->name);
-
- for (i = 0; i < 6; i++)
- printk("%2.2x%c", dev->dev_addr[i],
- i == 5 ? ' ' : ':');
- printk("\n");
+ printk("%s: MyriCOM MyriNET Ethernet %s\n",
+ dev->name, print_mac(mac, dev->dev_addr));
return 0;
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff