static int macb_mii_probe(struct net_device *dev)
{
struct macb *bp = netdev_priv(dev);
- struct phy_device *phydev = NULL;
+ struct phy_device *phydev;
struct eth_platform_data *pdata;
- int phy_addr;
-
- /* find the first phy */
- for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
- if (bp->mii_bus->phy_map[phy_addr]) {
- phydev = bp->mii_bus->phy_map[phy_addr];
- break;
- }
- }
+ int ret;
+ phydev = phy_find_first(bp->mii_bus);
if (!phydev) {
printk (KERN_ERR "%s: no PHY found\n", dev->name);
return -1;
/* TODO : add pin_irq */
/* attach the mac to the phy */
- if (pdata && pdata->is_rmii) {
- phydev = phy_connect(dev, phydev->dev.bus_id,
- &macb_handle_link_change, 0, PHY_INTERFACE_MODE_RMII);
- } else {
- phydev = phy_connect(dev, phydev->dev.bus_id,
- &macb_handle_link_change, 0, PHY_INTERFACE_MODE_MII);
- }
-
- if (IS_ERR(phydev)) {
+ ret = phy_connect_direct(dev, phydev, &macb_handle_link_change, 0,
+ pdata && pdata->is_rmii ?
+ PHY_INTERFACE_MODE_RMII :
+ PHY_INTERFACE_MODE_MII);
+ if (ret) {
printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
- return PTR_ERR(phydev);
+ return ret;
}
/* mask with MAC supported features */
struct eth_platform_data *pdata;
int err = -ENXIO, i;
- /* Enable managment port */
+ /* Enable management port */
macb_writel(bp, NCR, MACB_BIT(MPE));
bp->mii_bus = mdiobus_alloc();
dev_dbg(&bp->pdev->dev, "macb_tx status = %02lx\n",
(unsigned long)status);
- if (status & MACB_BIT(UND)) {
+ if (status & (MACB_BIT(UND) | MACB_BIT(TSR_RLE))) {
int i;
- printk(KERN_ERR "%s: TX underrun, resetting buffers\n",
- bp->dev->name);
+ printk(KERN_ERR "%s: TX %s, resetting buffers\n",
+ bp->dev->name, status & MACB_BIT(UND) ?
+ "underrun" : "retry limit exceeded");
/* Transfer ongoing, disable transmitter, to avoid confusion */
if (status & MACB_BIT(TGO))
static int macb_poll(struct napi_struct *napi, int budget)
{
struct macb *bp = container_of(napi, struct macb, napi);
- struct net_device *dev = bp->dev;
int work_done;
u32 status;
macb_writel(bp, RSR, status);
work_done = 0;
- if (!status) {
- /*
- * This may happen if an interrupt was pending before
- * this function was called last time, and no packets
- * have been received since.
- */
- napi_complete(napi);
- goto out;
- }
dev_dbg(&bp->pdev->dev, "poll: status = %08lx, budget = %d\n",
(unsigned long)status, budget);
- if (!(status & MACB_BIT(REC))) {
- dev_warn(&bp->pdev->dev,
- "No RX buffers complete, status = %02lx\n",
- (unsigned long)status);
- napi_complete(napi);
- goto out;
- }
-
work_done = macb_rx(bp, budget);
if (work_done < budget)
napi_complete(napi);
* We've done what we can to clean the buffers. Make sure we
* get notified when new packets arrive.
*/
-out:
macb_writel(bp, IER, MACB_RX_INT_FLAGS);
/* TODO: Handle errors */
}
}
- if (status & (MACB_BIT(TCOMP) | MACB_BIT(ISR_TUND)))
+ if (status & (MACB_BIT(TCOMP) | MACB_BIT(ISR_TUND) |
+ MACB_BIT(ISR_RLE)))
macb_tx(bp);
/*
return IRQ_HANDLED;
}
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling receive - used by netconsole and other diagnostic tools
+ * to allow network i/o with interrupts disabled.
+ */
+static void macb_poll_controller(struct net_device *dev)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ macb_interrupt(dev->irq, dev);
+ local_irq_restore(flags);
+}
+#endif
+
static int macb_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct macb *bp = netdev_priv(dev);
dma_addr_t mapping;
unsigned int len, entry;
u32 ctrl;
+ unsigned long flags;
#ifdef DEBUG
int i;
#endif
len = skb->len;
- spin_lock_irq(&bp->lock);
+ spin_lock_irqsave(&bp->lock, flags);
/* This is a hard error, log it. */
if (TX_BUFFS_AVAIL(bp) < 1) {
netif_stop_queue(dev);
- spin_unlock_irq(&bp->lock);
+ spin_unlock_irqrestore(&bp->lock, flags);
dev_err(&bp->pdev->dev,
"BUG! Tx Ring full when queue awake!\n");
dev_dbg(&bp->pdev->dev, "tx_head = %u, tx_tail = %u\n",
bp->tx_head, bp->tx_tail);
- return 1;
+ return NETDEV_TX_BUSY;
}
entry = bp->tx_head;
if (TX_BUFFS_AVAIL(bp) < 1)
netif_stop_queue(dev);
- spin_unlock_irq(&bp->lock);
+ spin_unlock_irqrestore(&bp->lock, flags);
dev->trans_start = jiffies;
- return 0;
+ return NETDEV_TX_OK;
}
static void macb_free_consistent(struct macb *bp)
{
struct dev_mc_list *curr;
unsigned long mc_filter[2];
- unsigned int i, bitnr;
+ unsigned int bitnr;
struct macb *bp = netdev_priv(dev);
mc_filter[0] = mc_filter[1] = 0;
- curr = dev->mc_list;
- for (i = 0; i < dev->mc_count; i++, curr = curr->next) {
- if (!curr) break; /* unexpected end of list */
-
+ netdev_for_each_mc_addr(curr, dev) {
bitnr = hash_get_index(curr->dmi_addr);
mc_filter[bitnr >> 5] |= 1 << (bitnr & 31);
}
macb_writel(bp, HRB, -1);
macb_writel(bp, HRT, -1);
cfg |= MACB_BIT(NCFGR_MTI);
- } else if (dev->mc_count > 0) {
+ } else if (!netdev_mc_empty(dev)) {
/* Enable specific multicasts */
macb_sethashtable(dev);
cfg |= MACB_BIT(NCFGR_MTI);
strcpy(info->driver, bp->pdev->dev.driver->name);
strcpy(info->version, "$Revision: 1.14 $");
- strcpy(info->bus_info, bp->pdev->dev.bus_id);
+ strcpy(info->bus_info, dev_name(&bp->pdev->dev));
}
-static struct ethtool_ops macb_ethtool_ops = {
+static const struct ethtool_ops macb_ethtool_ops = {
.get_settings = macb_get_settings,
.set_settings = macb_set_settings,
.get_drvinfo = macb_get_drvinfo,
return phy_mii_ioctl(phydev, if_mii(rq), cmd);
}
+static const struct net_device_ops macb_netdev_ops = {
+ .ndo_open = macb_open,
+ .ndo_stop = macb_close,
+ .ndo_start_xmit = macb_start_xmit,
+ .ndo_set_multicast_list = macb_set_rx_mode,
+ .ndo_get_stats = macb_get_stats,
+ .ndo_do_ioctl = macb_ioctl,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = macb_poll_controller,
+#endif
+};
+
static int __init macb_probe(struct platform_device *pdev)
{
struct eth_platform_data *pdata;
goto err_out_iounmap;
}
- dev->open = macb_open;
- dev->stop = macb_close;
- dev->hard_start_xmit = macb_start_xmit;
- dev->get_stats = macb_get_stats;
- dev->set_multicast_list = macb_set_rx_mode;
- dev->do_ioctl = macb_ioctl;
+ dev->netdev_ops = &macb_netdev_ops;
netif_napi_add(dev, &bp->napi, macb_poll, 64);
dev->ethtool_ops = &macb_ethtool_ops;
phydev = bp->phy_dev;
printk(KERN_INFO "%s: attached PHY driver [%s] "
- "(mii_bus:phy_addr=%s, irq=%d)\n",
- dev->name, phydev->drv->name, phydev->dev.bus_id, phydev->irq);
+ "(mii_bus:phy_addr=%s, irq=%d)\n", dev->name,
+ phydev->drv->name, dev_name(&phydev->dev), phydev->irq);
return 0;