-
menu "Infrared-port device drivers"
depends on IRDA!=n
If unsure, say Y.
+config BFIN_SIR
+ tristate "Blackfin SIR on UART"
+ depends on BLACKFIN && IRDA
+ default n
+ help
+ Say Y here if your want to enable SIR function on Blackfin UART
+ devices.
+
+ To activate this driver you can start irattach like:
+ "irattach irda0 -s"
+
+ Saying M, it will be built as a module named bfin_sir.
+
+ Note that you need to turn off one of the serial drivers for SIR
+ to use that UART.
+
+config BFIN_SIR0
+ bool "Blackfin SIR on UART0"
+ depends on BFIN_SIR && !SERIAL_BFIN_UART0
+
+config BFIN_SIR1
+ bool "Blackfin SIR on UART1"
+ depends on BFIN_SIR && !SERIAL_BFIN_UART1 && (!BF531 && !BF532 && !BF533 && !BF561)
+
+config BFIN_SIR2
+ bool "Blackfin SIR on UART2"
+ depends on BFIN_SIR && !SERIAL_BFIN_UART2 && (BF54x || BF538 || BF539)
+
+config BFIN_SIR3
+ bool "Blackfin SIR on UART3"
+ depends on BFIN_SIR && !SERIAL_BFIN_UART3 && (BF54x)
+
+choice
+ prompt "SIR Mode"
+ depends on BFIN_SIR
+ default SIR_BFIN_DMA
+
+config SIR_BFIN_DMA
+ bool "DMA mode"
+ depends on !DMA_UNCACHED_NONE
+
+config SIR_BFIN_PIO
+ bool "PIO mode"
+endchoice
+
comment "Dongle support"
+config SH_SIR
+ tristate "SuperH SIR on UART"
+ depends on IRDA && SUPERH && \
+ (CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7723 || \
+ CPU_SUBTYPE_SH7724)
+ default n
+ help
+ Say Y here if your want to enable SIR function on SuperH UART
+ devices.
+
config DONGLE
bool "Serial dongle support"
depends on IRTTY_SIR
config ESI_DONGLE
tristate "ESI JetEye PC dongle"
- depends on DONGLE && IRDA
+ depends on IRTTY_SIR && DONGLE && IRDA
help
Say Y here if you want to build support for the Extended Systems
JetEye PC dongle. To compile it as a module, choose M here. The ESI
config ACTISYS_DONGLE
tristate "ACTiSYS IR-220L and IR220L+ dongle"
- depends on DONGLE && IRDA
+ depends on IRTTY_SIR && DONGLE && IRDA
help
Say Y here if you want to build support for the ACTiSYS IR-220L and
IR220L+ dongles. To compile it as a module, choose M here. The
config TEKRAM_DONGLE
tristate "Tekram IrMate 210B dongle"
- depends on DONGLE && IRDA
+ depends on IRTTY_SIR && DONGLE && IRDA
help
Say Y here if you want to build support for the Tekram IrMate 210B
dongle. To compile it as a module, choose M here. The Tekram dongle
dongles you will have to start irattach like this:
"irattach -d tekram".
+config TOIM3232_DONGLE
+ tristate "TOIM3232 IrDa dongle"
+ depends on IRTTY_SIR && DONGLE && IRDA
+ help
+ Say Y here if you want to build support for the Vishay/Temic
+ TOIM3232 and TOIM4232 based dongles.
+ To compile it as a module, choose M here.
+
config LITELINK_DONGLE
tristate "Parallax LiteLink dongle"
- depends on DONGLE && IRDA
+ depends on IRTTY_SIR && DONGLE && IRDA
help
Say Y here if you want to build support for the Parallax Litelink
dongle. To compile it as a module, choose M here. The Parallax
config MA600_DONGLE
tristate "Mobile Action MA600 dongle"
- depends on DONGLE && IRDA && EXPERIMENTAL
+ depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
help
Say Y here if you want to build support for the Mobile Action MA600
dongle. To compile it as a module, choose M here. The MA600 dongle
config GIRBIL_DONGLE
tristate "Greenwich GIrBIL dongle"
- depends on DONGLE && IRDA && EXPERIMENTAL
+ depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
help
Say Y here if you want to build support for the Greenwich GIrBIL
dongle. If you want to compile it as a module, choose M here.
config MCP2120_DONGLE
tristate "Microchip MCP2120"
- depends on DONGLE && IRDA && EXPERIMENTAL
+ depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
help
Say Y here if you want to build support for the Microchip MCP2120
dongle. If you want to compile it as a module, choose M here.
config OLD_BELKIN_DONGLE
tristate "Old Belkin dongle"
- depends on DONGLE && IRDA && EXPERIMENTAL
+ depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
help
Say Y here if you want to build support for the Adaptec Airport 1000
and 2000 dongles. If you want to compile it as a module, choose
config ACT200L_DONGLE
tristate "ACTiSYS IR-200L dongle"
- depends on DONGLE && IRDA && EXPERIMENTAL
+ depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
help
Say Y here if you want to build support for the ACTiSYS IR-200L
dongle. If you want to compile it as a module, choose M here.
To activate support for ACTiSYS IR-200L dongle you will have to
start irattach like this: "irattach -d act200l".
-comment "Old SIR device drivers"
-
-config IRPORT_SIR
- tristate "IrPORT (IrDA serial driver)"
- depends on IRDA && BROKEN_ON_SMP
- ---help---
- Say Y here if you want to build support for the IrPORT IrDA device
- driver. To compile it as a module, choose M here: the module will be
- called irport. IrPORT can be used instead of IrTTY and sometimes
- this can be better. One example is if your IrDA port does not
- have echo-canceling, which will work OK with IrPORT since this
- driver is working in half-duplex mode only. You don't need to use
- irattach with IrPORT, but you just insert it the same way as FIR
- drivers (insmod irport io=0x3e8 irq=11). Notice that IrPORT is a
- SIR device driver which means that speed is limited to 115200 bps.
-
- If unsure, say Y.
-
-comment "Old Serial dongle support"
-
-config DONGLE_OLD
- bool "Old Serial dongle support"
- depends on (IRTTY_OLD || IRPORT_SIR) && BROKEN_ON_SMP
- help
- Say Y here if you have an infrared device that connects to your
- computer's serial port. These devices are called dongles. Then say Y
- or M to the driver for your particular dongle below.
-
- Note that the answer to this question won't directly affect the
- kernel: saying N will just cause the configurator to skip all
- the questions about serial dongles.
-
-config ESI_DONGLE_OLD
- tristate "ESI JetEye PC dongle"
- depends on DONGLE_OLD && IRDA
- help
- Say Y here if you want to build support for the Extended Systems
- JetEye PC dongle. To compile it as a module, choose M here. The ESI
- dongle attaches to the normal 9-pin serial port connector, and can
- currently only be used by IrTTY. To activate support for ESI
- dongles you will have to start irattach like this:
- "irattach -d esi".
-
-config ACTISYS_DONGLE_OLD
- tristate "ACTiSYS IR-220L and IR220L+ dongle"
- depends on DONGLE_OLD && IRDA
+config KINGSUN_DONGLE
+ tristate "KingSun/DonShine DS-620 IrDA-USB dongle"
+ depends on IRDA && USB && EXPERIMENTAL
help
- Say Y here if you want to build support for the ACTiSYS IR-220L and
- IR220L+ dongles. To compile it as a module, choose M here. The
- ACTiSYS dongles attaches to the normal 9-pin serial port connector,
- and can currently only be used by IrTTY. To activate support for
- ACTiSYS dongles you will have to start irattach like this:
- "irattach -d actisys" or "irattach -d actisys+".
+ Say Y or M here if you want to build support for the KingSun/DonShine
+ DS-620 IrDA-USB bridge device driver.
-config TEKRAM_DONGLE_OLD
- tristate "Tekram IrMate 210B dongle"
- depends on DONGLE_OLD && IRDA
- help
- Say Y here if you want to build support for the Tekram IrMate 210B
- dongle. To compile it as a module, choose M here. The Tekram dongle
- attaches to the normal 9-pin serial port connector, and can
- currently only be used by IrTTY. To activate support for Tekram
- dongles you will have to start irattach like this:
- "irattach -d tekram".
+ This USB bridge does not conform to the IrDA-USB device class
+ specification, and therefore needs its own specific driver. This
+ dongle supports SIR speed only (9600 bps).
-config GIRBIL_DONGLE_OLD
- tristate "Greenwich GIrBIL dongle"
- depends on DONGLE_OLD && IRDA
- help
- Say Y here if you want to build support for the Greenwich GIrBIL
- dongle. To compile it as a module, choose M here. The Greenwich
- dongle attaches to the normal 9-pin serial port connector, and can
- currently only be used by IrTTY. To activate support for Greenwich
- dongles you will have to insert "irattach -d girbil" in the
- /etc/irda/drivers script.
+ To compile it as a module, choose M here: the module will be called
+ kingsun-sir.
-config LITELINK_DONGLE_OLD
- tristate "Parallax LiteLink dongle"
- depends on DONGLE_OLD && IRDA
+config EP7211_DONGLE
+ tristate "EP7211 I/R support"
+ depends on IRTTY_SIR && ARCH_EP7211 && IRDA && EXPERIMENTAL
help
- Say Y here if you want to build support for the Parallax Litelink
- dongle. To compile it as a module, choose M here. The Parallax
- dongle attaches to the normal 9-pin serial port connector, and can
- currently only be used by IrTTY. To activate support for Parallax
- dongles you will have to start irattach like this:
- "irattach -d litelink".
+ Say Y here if you want to build support for the Cirrus logic
+ EP7211 chipset's infrared module.
-config MCP2120_DONGLE_OLD
- tristate "Microchip MCP2120"
- depends on DONGLE_OLD && IRDA
+config KSDAZZLE_DONGLE
+ tristate "KingSun Dazzle IrDA-USB dongle (EXPERIMENTAL)"
+ depends on IRDA && USB && EXPERIMENTAL
help
- Say Y here if you want to build support for the Microchip MCP2120
- dongle. To compile it as a module, choose M here. The MCP2120 dongle
- attaches to the normal 9-pin serial port connector, and can
- currently only be used by IrTTY. To activate support for MCP2120
- dongles you will have to insert "irattach -d mcp2120" in the
- /etc/irda/drivers script.
+ Say Y or M here if you want to build support for the KingSun Dazzle
+ IrDA-USB bridge device driver.
- You must build this dongle yourself. For more information see:
- <http://www.eyetap.org/~tangf/irda_sir_linux.html>
+ This USB bridge does not conform to the IrDA-USB device class
+ specification, and therefore needs its own specific driver. This
+ dongle supports SIR speeds only (9600 through 115200 bps).
-config OLD_BELKIN_DONGLE_OLD
- tristate "Old Belkin dongle"
- depends on DONGLE_OLD && IRDA
- help
- Say Y here if you want to build support for the Adaptec Airport 1000
- and 2000 dongles. To compile it as a module, choose M here: the module
- will be called old_belkin. Some information is contained in the
- comments at the top of <file:drivers/net/irda/old_belkin.c>.
+ To compile it as a module, choose M here: the module will be called
+ ksdazzle-sir.
-config ACT200L_DONGLE_OLD
- tristate "ACTiSYS IR-200L dongle (EXPERIMENTAL)"
- depends on DONGLE_OLD && EXPERIMENTAL && IRDA
+config KS959_DONGLE
+ tristate "KingSun KS-959 IrDA-USB dongle (EXPERIMENTAL)"
+ depends on IRDA && USB && EXPERIMENTAL
help
- Say Y here if you want to build support for the ACTiSYS IR-200L
- dongle. To compile it as a module, choose M here. The ACTiSYS
- IR-200L dongle attaches to the normal 9-pin serial port connector,
- and can currently only be used by IrTTY. To activate support for
- ACTiSYS IR-200L dongles you will have to start irattach like this:
- "irattach -d act200l".
-
-config MA600_DONGLE_OLD
- tristate "Mobile Action MA600 dongle (EXPERIMENTAL)"
- depends on DONGLE_OLD && EXPERIMENTAL && IRDA
- ---help---
- Say Y here if you want to build support for the Mobile Action MA600
- dongle. To compile it as a module, choose M here. The MA600 dongle
- attaches to the normal 9-pin serial port connector, and can
- currently only be tested on IrCOMM. To activate support for MA600
- dongles you will have to insert "irattach -d ma600" in the
- /etc/irda/drivers script. Note: irutils 0.9.15 requires no
- modification. irutils 0.9.9 needs modification. For more
- information, download the following tar gzip file.
+ Say Y or M here if you want to build support for the KingSun KS-959
+ IrDA-USB bridge device driver.
- There is a pre-compiled module on
- <http://engsvr.ust.hk/~eetwl95/ma600.html>
+ This USB bridge does not conform to the IrDA-USB device class
+ specification, and therefore needs its own specific driver. This
+ dongle supports SIR speeds only (9600 through 57600 bps).
-config EP7211_IR
- tristate "EP7211 I/R support"
- depends on DONGLE_OLD && ARCH_EP7211 && IRDA
+ To compile it as a module, choose M here: the module will be called
+ ks959-sir.
comment "FIR device drivers"
config USB_IRDA
tristate "IrDA USB dongles"
depends on IRDA && USB
+ select FW_LOADER
---help---
Say Y here if you want to build support for the USB IrDA FIR Dongle
device driver. To compile it as a module, choose M here: the module
will be called irda-usb. IrDA-USB support the various IrDA USB
- dongles available and most of their pecularities. Those dongles
+ dongles available and most of their peculiarities. Those dongles
plug in the USB port of your computer, are plug and play, and
support SIR and FIR (4Mbps) speeds. On the other hand, those
dongles tend to be less efficient than a FIR chipset.
config NSC_FIR
tristate "NSC PC87108/PC87338"
- depends on IRDA
+ depends on IRDA && ISA_DMA_API
help
Say Y here if you want to build support for the NSC PC87108 and
PC87338 IrDA chipsets. This driver supports SIR,
config WINBOND_FIR
tristate "Winbond W83977AF (IR)"
- depends on IRDA
+ depends on IRDA && ISA_DMA_API
help
Say Y here if you want to build IrDA support for the Winbond
W83977AF super-io chipset. This driver should be used for the IrDA
config TOSHIBA_FIR
tristate "Toshiba Type-O IR Port"
- depends on IRDA && PCI && !64BIT
+ depends on IRDA && PCI && !64BIT && VIRT_TO_BUS
help
Say Y here if you want to build support for the Toshiba Type-O IR
and Donau oboe chipsets. These chipsets are used by the Toshiba
config AU1000_FIR
tristate "Alchemy Au1000 SIR/FIR"
- depends on MIPS_AU1000 && IRDA
+ depends on SOC_AU1000 && IRDA
config SMC_IRCC_FIR
tristate "SMSC IrCC (EXPERIMENTAL)"
- depends on EXPERIMENTAL && IRDA
+ depends on EXPERIMENTAL && IRDA && ISA_DMA_API
help
Say Y here if you want to build support for the SMC Infrared
Communications Controller. It is used in a wide variety of
config ALI_FIR
tristate "ALi M5123 FIR (EXPERIMENTAL)"
- depends on EXPERIMENTAL && IRDA
+ depends on EXPERIMENTAL && IRDA && ISA_DMA_API
help
Say Y here if you want to build support for the ALi M5123 FIR
Controller. The ALi M5123 FIR Controller is embedded in ALi M1543C,
- M1535, M1535D, M1535+, M1535D Sourth Bridge. This driver supports
+ M1535, M1535D, M1535+, M1535D South Bridge. This driver supports
SIR, MIR and FIR (4Mbps) speeds.
To compile it as a module, choose M here: the module will be called
config VIA_FIR
tristate "VIA VT8231/VT1211 SIR/MIR/FIR"
- depends on IRDA
+ depends on IRDA && ISA_DMA_API
help
Say Y here if you want to build support for the VIA VT8231
and VIA VT1211 IrDA controllers, found on the motherboards using
- those those VIA chipsets. To use this controller, you will need
+ those VIA chipsets. To use this controller, you will need
to plug a specific 5 pins FIR IrDA dongle in the specific
motherboard connector. The driver provides support for SIR, MIR
and FIR (4Mbps) speeds.
To compile it as a module, choose M here: the module will be called
via-ircc.
+config PXA_FICP
+ tristate "Intel PXA2xx Internal FICP"
+ depends on ARCH_PXA && IRDA
+ help
+ Say Y or M here if you want to build support for the PXA2xx
+ built-in IRDA interface which can support both SIR and FIR.
+ This driver relies on platform specific helper routines so
+ available capabilities may vary from one PXA2xx target to
+ another.
+
+config MCS_FIR
+ tristate "MosChip MCS7780 IrDA-USB dongle"
+ depends on IRDA && USB && EXPERIMENTAL
+ select CRC32
+ help
+ Say Y or M here if you want to build support for the MosChip
+ MCS7780 IrDA-USB bridge device driver.
+
+ USB bridge based on the MosChip MCS7780 don't conform to the
+ IrDA-USB device class specification, and therefore need their
+ own specific driver. Those dongles support SIR and FIR (4Mbps)
+ speeds.
+
+ To compile it as a module, choose M here: the module will be called
+ mcs7780.
+
endmenu