#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/init.h>
/* function prototypes... This is easy because all the grot is in the
* generic LANCE support. All we have to support is probing for boards,
- * plus board-specific init, open and close actions.
+ * plus board-specific init, open and close actions.
* Oh, and we need to tell the generic code how to read and write LANCE registers...
*/
static int __devinit hplance_init_one(struct dio_dev *d,
const struct dio_device_id *ent);
-static void __devinit hplance_init(struct net_device *dev,
+static void __devinit hplance_init(struct net_device *dev,
struct dio_dev *d);
static void __devexit hplance_remove_one(struct dio_dev *d);
static void hplance_writerap(void *priv, unsigned short value);
.remove = __devexit_p(hplance_remove_one),
};
+static const struct net_device_ops hplance_netdev_ops = {
+ .ndo_open = hplance_open,
+ .ndo_stop = hplance_close,
+ .ndo_start_xmit = lance_start_xmit,
+ .ndo_set_multicast_list = lance_set_multicast,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = eth_mac_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = lance_poll,
+#endif
+};
+
/* Find all the HP Lance boards and initialise them... */
static int __devinit hplance_init_one(struct dio_dev *d,
const struct dio_device_id *ent)
{
struct net_device *dev;
int err = -ENOMEM;
+ int i;
dev = alloc_etherdev(sizeof(struct hplance_private));
if (!dev)
goto out_release_mem_region;
dio_set_drvdata(d, dev);
+
+ printk(KERN_INFO "%s: %s; select code %d, addr %2.2x", dev->name, d->name, d->scode, dev->dev_addr[0]);
+
+ for (i=1; i<6; i++) {
+ printk(":%2.2x", dev->dev_addr[i]);
+ }
+
+ printk(", irq %d\n", d->ipl);
+
return 0;
out_release_mem_region:
unsigned long va = (d->resource.start + DIO_VIRADDRBASE);
struct hplance_private *lp;
int i;
-
- printk(KERN_INFO "%s: %s; select code %d, addr", dev->name, d->name, d->scode);
/* reset the board */
out_8(va+DIO_IDOFF, 0xff);
/* Fill the dev fields */
dev->base_addr = va;
- dev->open = &hplance_open;
- dev->stop = &hplance_close;
-#ifdef CONFIG_NET_POLL_CONTROLLER
- dev->poll_controller = lance_poll;
-#endif
- dev->hard_start_xmit = &lance_start_xmit;
- dev->get_stats = &lance_get_stats;
- dev->set_multicast_list = &lance_set_multicast;
+ dev->netdev_ops = &hplance_netdev_ops;
dev->dma = 0;
-
+
for (i=0; i<6; i++) {
/* The NVRAM holds our ethernet address, one nibble per byte,
* at bytes NVRAMOFF+1,3,5,7,9...
*/
dev->dev_addr[i] = ((in_8(va + HPLANCE_NVRAMOFF + i*4 + 1) & 0xF) << 4)
| (in_8(va + HPLANCE_NVRAMOFF + i*4 + 3) & 0xF);
- printk("%c%2.2x", i == 0 ? ' ' : ':', dev->dev_addr[i]);
}
-
+
lp = netdev_priv(dev);
lp->lance.name = (char*)d->name; /* discards const, shut up gcc */
lp->lance.base = va;
lp->lance.lance_log_tx_bufs = LANCE_LOG_TX_BUFFERS;
lp->lance.rx_ring_mod_mask = RX_RING_MOD_MASK;
lp->lance.tx_ring_mod_mask = TX_RING_MOD_MASK;
- printk(", irq %d\n", lp->lance.irq);
}
/* This is disgusting. We have to check the DIO status register for ack every
{
int status;
struct lance_private *lp = netdev_priv(dev);
-
+
status = lance_open(dev); /* call generic lance open code */
if (status)
return status;
return 0;
}
-int __init hplance_init_module(void)
+static int __init hplance_init_module(void)
{
return dio_register_driver(&hplance_driver);
}
-void __exit hplance_cleanup_module(void)
+static void __exit hplance_cleanup_module(void)
{
dio_unregister_driver(&hplance_driver);
}