iwlwifi: testing the wrong variable in iwl_add_bssid_station()

[safe/jmp/linux-2.6] / drivers / net / hp.c

diff --git a/drivers/net/hp.c b/drivers/net/hp.c
index c649a80..86ececd 100644 (file)
--- a/drivers/net/hp.c
+++ b/drivers/net/hp.c
@@ -59,8 +59,6 @@ static unsigned int hppclan_portlist[] __initdata =
 
 static int hp_probe1(struct net_device *dev, int ioaddr);
 
-static int hp_open(struct net_device *dev);
-static int hp_close(struct net_device *dev);
 static void hp_reset_8390(struct net_device *dev);
 static void hp_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
                                        int ring_page);
@@ -103,7 +101,7 @@ static int __init do_hp_probe(struct net_device *dev)
 #ifndef MODULE
 struct net_device * __init hp_probe(int unit)
 {
-       struct net_device *dev = alloc_ei_netdev();
+       struct net_device *dev = alloc_eip_netdev();
        int err;
 
        if (!dev)
@@ -127,7 +125,6 @@ static int __init hp_probe1(struct net_device *dev, int ioaddr)
        int i, retval, board_id, wordmode;
        const char *name;
        static unsigned version_printed;
-       DECLARE_MAC_BUF(mac);
 
        if (!request_region(ioaddr, HP_IO_EXTENT, DRV_NAME))
                return -EBUSY;
@@ -161,7 +158,7 @@ static int __init hp_probe1(struct net_device *dev, int ioaddr)
        for(i = 0; i < ETHER_ADDR_LEN; i++)
                dev->dev_addr[i] = inb(ioaddr + i);
 
-       printk(" %s", print_mac(mac, dev->dev_addr));
+       printk(" %pM", dev->dev_addr);
 
        /* Snarf the interrupt now.  Someday this could be moved to open(). */
        if (dev->irq < 2) {
@@ -176,7 +173,7 @@ static int __init hp_probe1(struct net_device *dev, int ioaddr)
                                outb_p(irqmap[irq] | HP_RUN, ioaddr + HP_CONFIGURE);
                                outb_p( 0x00 | HP_RUN, ioaddr + HP_CONFIGURE);
                                if (irq == probe_irq_off(cookie)                 /* It's a good IRQ line! */
-                                       && request_irq (irq, ei_interrupt, 0, DRV_NAME, dev) == 0) {
+                                       && request_irq (irq, eip_interrupt, 0, DRV_NAME, dev) == 0) {
                                        printk(" selecting IRQ %d.\n", irq);
                                        dev->irq = *irqp;
                                        break;
@@ -191,7 +188,7 @@ static int __init hp_probe1(struct net_device *dev, int ioaddr)
        } else {
                if (dev->irq == 2)
                        dev->irq = 9;
-               if ((retval = request_irq(dev->irq, ei_interrupt, 0, DRV_NAME, dev))) {
+               if ((retval = request_irq(dev->irq, eip_interrupt, 0, DRV_NAME, dev))) {
                        printk (" unable to get IRQ %d.\n", dev->irq);
                        goto out;
                }
@@ -199,11 +196,7 @@ static int __init hp_probe1(struct net_device *dev, int ioaddr)
 
        /* Set the base address to point to the NIC, not the "real" base! */
        dev->base_addr = ioaddr + NIC_OFFSET;
-       dev->open = &hp_open;
-       dev->stop = &hp_close;
-#ifdef CONFIG_NET_POLL_CONTROLLER
-       dev->poll_controller = ei_poll;
-#endif
+       dev->netdev_ops = &eip_netdev_ops;
 
        ei_status.name = name;
        ei_status.word16 = wordmode;
@@ -228,20 +221,6 @@ out:
        return retval;
 }
 
-static int
-hp_open(struct net_device *dev)
-{
-       ei_open(dev);
-       return 0;
-}
-
-static int
-hp_close(struct net_device *dev)
-{
-       ei_close(dev);
-       return 0;
-}
-
 static void
 hp_reset_8390(struct net_device *dev)
 {
@@ -261,7 +240,6 @@ hp_reset_8390(struct net_device *dev)
                printk("%s: hp_reset_8390() did not complete.\n", dev->name);
 
        if (ei_debug > 1) printk("8390 reset done (%ld).", jiffies);
-       return;
 }
 
 static void
@@ -381,7 +359,6 @@ hp_block_output(struct net_device *dev, int count,
                           dev->name, (start_page << 8) + count, addr);
        }
        outb_p(saved_config & (~HP_DATAON), nic_base - NIC_OFFSET + HP_CONFIGURE);
-       return;
 }
 
 /* This function resets the ethercard if something screws up. */
@@ -389,10 +366,9 @@ static void __init
 hp_init_card(struct net_device *dev)
 {
        int irq = dev->irq;
-       NS8390_init(dev, 0);
+       NS8390p_init(dev, 0);
        outb_p(irqmap[irq&0x0f] | HP_RUN,
                   dev->base_addr - NIC_OFFSET + HP_CONFIGURE);
-       return;
 }
 
 #ifdef MODULE
@@ -421,7 +397,7 @@ init_module(void)
                        if (this_dev != 0) break; /* only autoprobe 1st one */
                        printk(KERN_NOTICE "hp.c: Presently autoprobing (not recommended) for a single card.\n");
                }
-               dev = alloc_ei_netdev();
+               dev = alloc_eip_netdev();
                if (!dev)
                        break;
                dev->irq = irq[this_dev];