#include <linux/crc32.h>
#include <linux/mii.h>
#include <linux/phy.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
#include <asm/io.h>
#include <asm/irq.h>
* the local mdio pins, which may not be the same as system mdio bus, used for
* controlling the external PHYs, for example.
*/
-int gfar_local_mdio_write(struct gfar_mii *regs, int mii_id,
+int gfar_local_mdio_write(struct gfar_mii __iomem *regs, int mii_id,
int regnum, u16 value)
{
/* Set the PHY address and the register address we want to write */
* and are always tied to the local mdio pins, which may not be the
* same as system mdio bus, used for controlling the external PHYs, for eg.
*/
-int gfar_local_mdio_read(struct gfar_mii *regs, int mii_id, int regnum)
-
+int gfar_local_mdio_read(struct gfar_mii __iomem *regs, int mii_id, int regnum)
{
u16 value;
}
/* Reset the MIIM registers, and wait for the bus to free */
-int gfar_mdio_reset(struct mii_bus *bus)
+static int gfar_mdio_reset(struct mii_bus *bus)
{
struct gfar_mii __iomem *regs = (void __iomem *)bus->priv;
unsigned int timeout = PHY_INIT_TIMEOUT;
- spin_lock_bh(&bus->mdio_lock);
+ mutex_lock(&bus->mdio_lock);
/* Reset the management interface */
gfar_write(®s->miimcfg, MIIMCFG_RESET);
/* Wait until the bus is free */
while ((gfar_read(®s->miimind) & MIIMIND_BUSY) &&
- timeout--)
+ --timeout)
cpu_relax();
- spin_unlock_bh(&bus->mdio_lock);
+ mutex_unlock(&bus->mdio_lock);
- if(timeout <= 0) {
+ if(timeout == 0) {
printk(KERN_ERR "%s: The MII Bus is stuck!\n",
bus->name);
return -EBUSY;
return 0;
}
+/* Allocate an array which provides irq #s for each PHY on the given bus */
+static int *create_irq_map(struct device_node *np)
+{
+ int *irqs;
+ int i;
+ struct device_node *child = NULL;
+
+ irqs = kcalloc(PHY_MAX_ADDR, sizeof(int), GFP_KERNEL);
+
+ if (!irqs)
+ return NULL;
+
+ for (i = 0; i < PHY_MAX_ADDR; i++)
+ irqs[i] = PHY_POLL;
+
+ while ((child = of_get_next_child(np, child)) != NULL) {
+ int irq = irq_of_parse_and_map(child, 0);
+ const u32 *id;
+
+ if (irq == NO_IRQ)
+ continue;
+
+ id = of_get_property(child, "reg", NULL);
+
+ if (!id)
+ continue;
+
+ if (*id < PHY_MAX_ADDR && *id >= 0)
+ irqs[*id] = irq;
+ else
+ printk(KERN_WARNING "%s: "
+ "%d is not a valid PHY address\n",
+ np->full_name, *id);
+ }
+
+ return irqs;
+}
+
+
+void gfar_mdio_bus_name(char *name, struct device_node *np)
+{
+ const u32 *reg;
+
+ reg = of_get_property(np, "reg", NULL);
+
+ snprintf(name, MII_BUS_ID_SIZE, "%s@%x", np->name, reg ? *reg : 0);
+}
+
+/* Scan the bus in reverse, looking for an empty spot */
+static int gfar_mdio_find_free(struct mii_bus *new_bus)
+{
+ int i;
+
+ for (i = PHY_MAX_ADDR; i > 0; i--) {
+ u32 phy_id;
+
+ if (get_phy_id(new_bus, i, &phy_id))
+ return -1;
+
+ if (phy_id == 0xffffffff)
+ break;
+ }
+
+ return i;
+}
-int gfar_mdio_probe(struct device *dev)
+static int gfar_mdio_probe(struct of_device *ofdev,
+ const struct of_device_id *match)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct gianfar_mdio_data *pdata;
struct gfar_mii __iomem *regs;
+ struct gfar __iomem *enet_regs;
struct mii_bus *new_bus;
- struct resource *r;
int err = 0;
+ u64 addr, size;
+ struct device_node *np = ofdev->node;
+ struct device_node *tbi;
+ int tbiaddr = -1;
- if (NULL == dev)
- return -EINVAL;
-
- new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL);
-
+ new_bus = mdiobus_alloc();
if (NULL == new_bus)
return -ENOMEM;
new_bus->read = &gfar_mdio_read,
new_bus->write = &gfar_mdio_write,
new_bus->reset = &gfar_mdio_reset,
- new_bus->id = pdev->id;
+ gfar_mdio_bus_name(new_bus->id, np);
- pdata = (struct gianfar_mdio_data *)pdev->dev.platform_data;
+ /* Set the PHY base address */
+ addr = of_translate_address(np, of_get_address(np, 0, &size, NULL));
+ regs = ioremap(addr, size);
- if (NULL == pdata) {
- printk(KERN_ERR "gfar mdio %d: Missing platform data!\n", pdev->id);
- return -ENODEV;
+ if (NULL == regs) {
+ err = -ENOMEM;
+ goto err_free_bus;
}
- r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ new_bus->priv = (void __force *)regs;
- /* Set the PHY base address */
- regs = ioremap(r->start, sizeof (struct gfar_mii));
+ new_bus->irq = create_irq_map(np);
- if (NULL == regs) {
+ if (new_bus->irq == NULL) {
err = -ENOMEM;
- goto reg_map_fail;
+ goto err_unmap_regs;
}
- new_bus->priv = (void __force *)regs;
+ new_bus->parent = &ofdev->dev;
+ dev_set_drvdata(&ofdev->dev, new_bus);
+
+ /*
+ * This is mildly evil, but so is our hardware for doing this.
+ * Also, we have to cast back to struct gfar_mii because of
+ * definition weirdness done in gianfar.h.
+ */
+ enet_regs = (struct gfar __iomem *)
+ ((char *)regs - offsetof(struct gfar, gfar_mii_regs));
+
+ for_each_child_of_node(np, tbi) {
+ if (!strncmp(tbi->type, "tbi-phy", 8))
+ break;
+ }
- new_bus->irq = pdata->irq;
+ if (tbi) {
+ const u32 *prop = of_get_property(tbi, "reg", NULL);
- new_bus->dev = dev;
- dev_set_drvdata(dev, new_bus);
+ if (prop)
+ tbiaddr = *prop;
+ }
+
+ if (tbiaddr == -1) {
+ gfar_write(&enet_regs->tbipa, 0);
+
+ tbiaddr = gfar_mdio_find_free(new_bus);
+ }
+
+ /*
+ * We define TBIPA at 0 to be illegal, opting to fail for boards that
+ * have PHYs at 1-31, rather than change tbipa and rescan.
+ */
+ if (tbiaddr == 0) {
+ err = -EBUSY;
+
+ goto err_free_irqs;
+ }
+
+ gfar_write(&enet_regs->tbipa, tbiaddr);
+
+ /*
+ * The TBIPHY-only buses will find PHYs at every address,
+ * so we mask them all but the TBI
+ */
+ if (!of_device_is_compatible(np, "fsl,gianfar-mdio"))
+ new_bus->phy_mask = ~(1 << tbiaddr);
err = mdiobus_register(new_bus);
- if (0 != err) {
+ if (err != 0) {
printk (KERN_ERR "%s: Cannot register as MDIO bus\n",
new_bus->name);
- goto bus_register_fail;
+ goto err_free_irqs;
}
return 0;
-bus_register_fail:
+err_free_irqs:
+ kfree(new_bus->irq);
+err_unmap_regs:
iounmap(regs);
-reg_map_fail:
- kfree(new_bus);
+err_free_bus:
+ mdiobus_free(new_bus);
return err;
}
-int gfar_mdio_remove(struct device *dev)
+static int gfar_mdio_remove(struct of_device *ofdev)
{
- struct mii_bus *bus = dev_get_drvdata(dev);
+ struct mii_bus *bus = dev_get_drvdata(&ofdev->dev);
mdiobus_unregister(bus);
- dev_set_drvdata(dev, NULL);
+ dev_set_drvdata(&ofdev->dev, NULL);
iounmap((void __iomem *)bus->priv);
bus->priv = NULL;
- kfree(bus);
+ kfree(bus->irq);
+ mdiobus_free(bus);
return 0;
}
-static struct device_driver gianfar_mdio_driver = {
+static struct of_device_id gfar_mdio_match[] =
+{
+ {
+ .compatible = "fsl,gianfar-mdio",
+ },
+ {
+ .compatible = "fsl,gianfar-tbi",
+ },
+ {
+ .type = "mdio",
+ .compatible = "gianfar",
+ },
+ {},
+};
+
+static struct of_platform_driver gianfar_mdio_driver = {
.name = "fsl-gianfar_mdio",
- .bus = &platform_bus_type,
+ .match_table = gfar_mdio_match,
+
.probe = gfar_mdio_probe,
.remove = gfar_mdio_remove,
};
int __init gfar_mdio_init(void)
{
- return driver_register(&gianfar_mdio_driver);
+ return of_register_platform_driver(&gianfar_mdio_driver);
}
-void __exit gfar_mdio_exit(void)
+void gfar_mdio_exit(void)
{
- driver_unregister(&gianfar_mdio_driver);
+ of_unregister_platform_driver(&gianfar_mdio_driver);
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff