#include <linux/spinlock.h>
#include <linux/workqueue.h>
#include <linux/bitops.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
#include <asm/cacheflush.h>
-#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || \
- defined(CONFIG_M5272) || defined(CONFIG_M528x) || \
- defined(CONFIG_M520x) || defined(CONFIG_M532x)
+#ifndef CONFIG_ARCH_MXC
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
-#include "fec.h"
-#else
-#include <asm/8xx_immap.h>
-#include <asm/mpc8xx.h>
-#include "commproc.h"
#endif
-#if defined(CONFIG_FEC2)
-#define FEC_MAX_PORTS 2
-#else
-#define FEC_MAX_PORTS 1
-#endif
+#include "fec.h"
-#if defined(CONFIG_FADS) || defined(CONFIG_RPXCLASSIC) || defined(CONFIG_M5272)
-#define HAVE_mii_link_interrupt
+#ifdef CONFIG_ARCH_MXC
+#include <mach/hardware.h>
+#define FEC_ALIGNMENT 0xf
+#else
+#define FEC_ALIGNMENT 0x3
#endif
/*
* Define the fixed address of the FEC hardware.
*/
-static unsigned int fec_hw[] = {
#if defined(CONFIG_M5272)
- (MCF_MBAR + 0x840),
-#elif defined(CONFIG_M527x)
- (MCF_MBAR + 0x1000),
- (MCF_MBAR + 0x1800),
-#elif defined(CONFIG_M523x) || defined(CONFIG_M528x)
- (MCF_MBAR + 0x1000),
-#elif defined(CONFIG_M520x)
- (MCF_MBAR+0x30000),
-#elif defined(CONFIG_M532x)
- (MCF_MBAR+0xfc030000),
-#else
- &(((immap_t *)IMAP_ADDR)->im_cpm.cp_fec),
-#endif
-};
+#define HAVE_mii_link_interrupt
static unsigned char fec_mac_default[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
#else
#define FEC_FLASHMAC 0
#endif
+#endif /* CONFIG_M5272 */
/* Forward declarations of some structures to support different PHYs
*/
* account when setting it.
*/
#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
- defined(CONFIG_M520x) || defined(CONFIG_M532x)
+ defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_ARCH_MXC)
#define OPT_FRAME_SIZE (PKT_MAXBUF_SIZE << 16)
#else
#define OPT_FRAME_SIZE 0
struct net_device *netdev;
+ struct clk *clk;
+
/* The saved address of a sent-in-place packet/buffer, for skfree(). */
unsigned char *tx_bounce[TX_RING_SIZE];
struct sk_buff* tx_skbuff[TX_RING_SIZE];
/* CPM dual port RAM relative addresses.
*/
+ dma_addr_t bd_dma;
cbd_t *rx_bd_base; /* Address of Rx and Tx buffers. */
cbd_t *tx_bd_base;
cbd_t *cur_rx, *cur_tx; /* The next free ring entry */
* 4-byte boundaries. Use bounce buffers to copy data
* and get it aligned. Ugh.
*/
- if (bdp->cbd_bufaddr & 0x3) {
+ if (bdp->cbd_bufaddr & FEC_ALIGNMENT) {
unsigned int index;
index = bdp - fep->tx_bd_base;
- memcpy(fep->tx_bounce[index], (void *) bdp->cbd_bufaddr, bdp->cbd_datlen);
+ memcpy(fep->tx_bounce[index], (void *)skb->data, skb->len);
bdp->cbd_bufaddr = __pa(fep->tx_bounce[index]);
}
/* Push the data cache so the CPM does not get stale memory
* data.
*/
- flush_dcache_range((unsigned long)skb->data,
- (unsigned long)skb->data + skb->len);
+ dma_sync_single(NULL, bdp->cbd_bufaddr,
+ bdp->cbd_datlen, DMA_TO_DEVICE);
/* Send it on its way. Tell FEC it's ready, interrupt when done,
* it's the last BD of the frame, and to put the CRC on the end.
dev->stats.rx_bytes += pkt_len;
data = (__u8*)__va(bdp->cbd_bufaddr);
+ dma_sync_single(NULL, (unsigned long)__pa(data),
+ pkt_len - 4, DMA_FROM_DEVICE);
+
/* This does 16 byte alignment, exactly what we need.
* The packet length includes FCS, but we don't want to
* include that when passing upstream as it messes up
/* register definitions for the 8721 */
#define MII_KS8721BL_RXERCR 21
-#define MII_KS8721BL_ICSR 22
+#define MII_KS8721BL_ICSR 27
#define MII_KS8721BL_PHYCR 31
static phy_cmd_t const phy_cmd_ks8721bl_config[] = {
static void mii_parse_dp8384x_sr2(uint mii_reg, struct net_device *dev)
{
- struct fec_enet_private *fep = dev->priv;
+ struct fec_enet_private *fep = netdev_priv(dev);
volatile uint *s = &(fep->phy_status);
*s &= ~(PHY_STAT_SPMASK | PHY_STAT_LINK | PHY_STAT_ANC);
/* ------------------------------------------------------------------------- */
#ifdef HAVE_mii_link_interrupt
-#ifdef CONFIG_RPXCLASSIC
-static void
-mii_link_interrupt(void *dev_id);
-#else
static irqreturn_t
mii_link_interrupt(int irq, void * dev_id);
-#endif
-#endif
-#if defined(CONFIG_M5272)
/*
- * Code specific to Coldfire 5272 setup.
+ * This is specific to the MII interrupt setup of the M5272EVB.
*/
-static void __inline__ fec_request_intrs(struct net_device *dev)
-{
- volatile unsigned long *icrp;
- static const struct idesc {
- char *name;
- unsigned short irq;
- irq_handler_t handler;
- } *idp, id[] = {
- { "fec(RX)", 86, fec_enet_interrupt },
- { "fec(TX)", 87, fec_enet_interrupt },
- { "fec(OTHER)", 88, fec_enet_interrupt },
- { "fec(MII)", 66, mii_link_interrupt },
- { NULL },
- };
-
- /* Setup interrupt handlers. */
- for (idp = id; idp->name; idp++) {
- if (request_irq(idp->irq, idp->handler, IRQF_DISABLED, idp->name, dev) != 0)
- printk("FEC: Could not allocate %s IRQ(%d)!\n", idp->name, idp->irq);
- }
-
- /* Unmask interrupt at ColdFire 5272 SIM */
- icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR3);
- *icrp = 0x00000ddd;
- icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
- *icrp = 0x0d000000;
-}
-
-static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_private *fep)
-{
- volatile fec_t *fecp;
-
- fecp = fep->hwp;
- fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04;
- fecp->fec_x_cntrl = 0x00;
-
- /*
- * Set MII speed to 2.5 MHz
- * See 5272 manual section 11.5.8: MSCR
- */
- fep->phy_speed = ((((MCF_CLK / 4) / (2500000 / 10)) + 5) / 10) * 2;
- fecp->fec_mii_speed = fep->phy_speed;
-
- fec_restart(dev, 0);
-}
-
-static void __inline__ fec_get_mac(struct net_device *dev)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
- volatile fec_t *fecp;
- unsigned char *iap, tmpaddr[ETH_ALEN];
-
- fecp = fep->hwp;
-
- if (FEC_FLASHMAC) {
- /*
- * Get MAC address from FLASH.
- * If it is all 1's or 0's, use the default.
- */
- iap = (unsigned char *)FEC_FLASHMAC;
- if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) &&
- (iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0))
- iap = fec_mac_default;
- if ((iap[0] == 0xff) && (iap[1] == 0xff) && (iap[2] == 0xff) &&
- (iap[3] == 0xff) && (iap[4] == 0xff) && (iap[5] == 0xff))
- iap = fec_mac_default;
- } else {
- *((unsigned long *) &tmpaddr[0]) = fecp->fec_addr_low;
- *((unsigned short *) &tmpaddr[4]) = (fecp->fec_addr_high >> 16);
- iap = &tmpaddr[0];
- }
-
- memcpy(dev->dev_addr, iap, ETH_ALEN);
-
- /* Adjust MAC if using default MAC address */
- if (iap == fec_mac_default)
- dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index;
-}
-
-static void __inline__ fec_enable_phy_intr(void)
+static void __inline__ fec_request_mii_intr(struct net_device *dev)
{
+ if (request_irq(66, mii_link_interrupt, IRQF_DISABLED, "fec(MII)", dev) != 0)
+ printk("FEC: Could not allocate fec(MII) IRQ(66)!\n");
}
static void __inline__ fec_disable_phy_intr(void)
icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
*icrp = 0x0d000000;
}
-
-static void __inline__ fec_localhw_setup(void)
-{
-}
-
-/*
- * Do not need to make region uncached on 5272.
- */
-static void __inline__ fec_uncache(unsigned long addr)
-{
-}
-
-/* ------------------------------------------------------------------------- */
-
-#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
-
-/*
- * Code specific to Coldfire 5230/5231/5232/5234/5235,
- * the 5270/5271/5274/5275 and 5280/5282 setups.
- */
-static void __inline__ fec_request_intrs(struct net_device *dev)
-{
- struct fec_enet_private *fep;
- int b;
- static const struct idesc {
- char *name;
- unsigned short irq;
- } *idp, id[] = {
- { "fec(TXF)", 23 },
- { "fec(RXF)", 27 },
- { "fec(MII)", 29 },
- { NULL },
- };
-
- fep = netdev_priv(dev);
- b = (fep->index) ? 128 : 64;
-
- /* Setup interrupt handlers. */
- for (idp = id; idp->name; idp++) {
- if (request_irq(b+idp->irq, fec_enet_interrupt, IRQF_DISABLED, idp->name, dev) != 0)
- printk("FEC: Could not allocate %s IRQ(%d)!\n", idp->name, b+idp->irq);
- }
-
- /* Unmask interrupts at ColdFire 5280/5282 interrupt controller */
- {
- volatile unsigned char *icrp;
- volatile unsigned long *imrp;
- int i, ilip;
-
- b = (fep->index) ? MCFICM_INTC1 : MCFICM_INTC0;
- icrp = (volatile unsigned char *) (MCF_IPSBAR + b +
- MCFINTC_ICR0);
- for (i = 23, ilip = 0x28; (i < 36); i++)
- icrp[i] = ilip--;
-
- imrp = (volatile unsigned long *) (MCF_IPSBAR + b +
- MCFINTC_IMRH);
- *imrp &= ~0x0000000f;
- imrp = (volatile unsigned long *) (MCF_IPSBAR + b +
- MCFINTC_IMRL);
- *imrp &= ~0xff800001;
- }
-
-#if defined(CONFIG_M528x)
- /* Set up gpio outputs for MII lines */
- {
- volatile u16 *gpio_paspar;
- volatile u8 *gpio_pehlpar;
-
- gpio_paspar = (volatile u16 *) (MCF_IPSBAR + 0x100056);
- gpio_pehlpar = (volatile u16 *) (MCF_IPSBAR + 0x100058);
- *gpio_paspar |= 0x0f00;
- *gpio_pehlpar = 0xc0;
- }
#endif
-#if defined(CONFIG_M527x)
- /* Set up gpio outputs for MII lines */
- {
- volatile u8 *gpio_par_fec;
- volatile u16 *gpio_par_feci2c;
-
- gpio_par_feci2c = (volatile u16 *)(MCF_IPSBAR + 0x100082);
- /* Set up gpio outputs for FEC0 MII lines */
- gpio_par_fec = (volatile u8 *)(MCF_IPSBAR + 0x100078);
-
- *gpio_par_feci2c |= 0x0f00;
- *gpio_par_fec |= 0xc0;
-
-#if defined(CONFIG_FEC2)
- /* Set up gpio outputs for FEC1 MII lines */
- gpio_par_fec = (volatile u8 *)(MCF_IPSBAR + 0x100079);
-
- *gpio_par_feci2c |= 0x00a0;
- *gpio_par_fec |= 0xc0;
-#endif /* CONFIG_FEC2 */
- }
-#endif /* CONFIG_M527x */
-}
-
-static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_private *fep)
-{
- volatile fec_t *fecp;
-
- fecp = fep->hwp;
- fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04;
- fecp->fec_x_cntrl = 0x00;
-
- /*
- * Set MII speed to 2.5 MHz
- * See 5282 manual section 17.5.4.7: MSCR
- */
- fep->phy_speed = ((((MCF_CLK / 2) / (2500000 / 10)) + 5) / 10) * 2;
- fecp->fec_mii_speed = fep->phy_speed;
-
- fec_restart(dev, 0);
-}
-
-static void __inline__ fec_get_mac(struct net_device *dev)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
- volatile fec_t *fecp;
- unsigned char *iap, tmpaddr[ETH_ALEN];
-
- fecp = fep->hwp;
-
- if (FEC_FLASHMAC) {
- /*
- * Get MAC address from FLASH.
- * If it is all 1's or 0's, use the default.
- */
- iap = FEC_FLASHMAC;
- if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) &&
- (iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0))
- iap = fec_mac_default;
- if ((iap[0] == 0xff) && (iap[1] == 0xff) && (iap[2] == 0xff) &&
- (iap[3] == 0xff) && (iap[4] == 0xff) && (iap[5] == 0xff))
- iap = fec_mac_default;
- } else {
- *((unsigned long *) &tmpaddr[0]) = fecp->fec_addr_low;
- *((unsigned short *) &tmpaddr[4]) = (fecp->fec_addr_high >> 16);
- iap = &tmpaddr[0];
- }
-
- memcpy(dev->dev_addr, iap, ETH_ALEN);
-
- /* Adjust MAC if using default MAC address */
- if (iap == fec_mac_default)
- dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index;
-}
-
-static void __inline__ fec_enable_phy_intr(void)
-{
-}
-
-static void __inline__ fec_disable_phy_intr(void)
-{
-}
-
-static void __inline__ fec_phy_ack_intr(void)
-{
-}
-
-static void __inline__ fec_localhw_setup(void)
-{
-}
-
-/*
- * Do not need to make region uncached on 5272.
- */
-static void __inline__ fec_uncache(unsigned long addr)
-{
-}
-
-/* ------------------------------------------------------------------------- */
-
-#elif defined(CONFIG_M520x)
-
-/*
- * Code specific to Coldfire 520x
- */
-static void __inline__ fec_request_intrs(struct net_device *dev)
-{
- struct fec_enet_private *fep;
- int b;
- static const struct idesc {
- char *name;
- unsigned short irq;
- } *idp, id[] = {
- { "fec(TXF)", 23 },
- { "fec(RXF)", 27 },
- { "fec(MII)", 29 },
- { NULL },
- };
-
- fep = netdev_priv(dev);
- b = 64 + 13;
-
- /* Setup interrupt handlers. */
- for (idp = id; idp->name; idp++) {
- if (request_irq(b+idp->irq, fec_enet_interrupt, IRQF_DISABLED, idp->name,dev) != 0)
- printk("FEC: Could not allocate %s IRQ(%d)!\n", idp->name, b+idp->irq);
- }
-
- /* Unmask interrupts at ColdFire interrupt controller */
- {
- volatile unsigned char *icrp;
- volatile unsigned long *imrp;
-
- icrp = (volatile unsigned char *) (MCF_IPSBAR + MCFICM_INTC0 +
- MCFINTC_ICR0);
- for (b = 36; (b < 49); b++)
- icrp[b] = 0x04;
- imrp = (volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 +
- MCFINTC_IMRH);
- *imrp &= ~0x0001FFF0;
- }
- *(volatile unsigned char *)(MCF_IPSBAR + MCF_GPIO_PAR_FEC) |= 0xf0;
- *(volatile unsigned char *)(MCF_IPSBAR + MCF_GPIO_PAR_FECI2C) |= 0x0f;
-}
-
-static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_private *fep)
-{
- volatile fec_t *fecp;
-
- fecp = fep->hwp;
- fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04;
- fecp->fec_x_cntrl = 0x00;
-
- /*
- * Set MII speed to 2.5 MHz
- * See 5282 manual section 17.5.4.7: MSCR
- */
- fep->phy_speed = ((((MCF_CLK / 2) / (2500000 / 10)) + 5) / 10) * 2;
- fecp->fec_mii_speed = fep->phy_speed;
-
- fec_restart(dev, 0);
-}
-
-static void __inline__ fec_get_mac(struct net_device *dev)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
- volatile fec_t *fecp;
- unsigned char *iap, tmpaddr[ETH_ALEN];
-
- fecp = fep->hwp;
-
- if (FEC_FLASHMAC) {
- /*
- * Get MAC address from FLASH.
- * If it is all 1's or 0's, use the default.
- */
- iap = FEC_FLASHMAC;
- if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) &&
- (iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0))
- iap = fec_mac_default;
- if ((iap[0] == 0xff) && (iap[1] == 0xff) && (iap[2] == 0xff) &&
- (iap[3] == 0xff) && (iap[4] == 0xff) && (iap[5] == 0xff))
- iap = fec_mac_default;
- } else {
- *((unsigned long *) &tmpaddr[0]) = fecp->fec_addr_low;
- *((unsigned short *) &tmpaddr[4]) = (fecp->fec_addr_high >> 16);
- iap = &tmpaddr[0];
- }
-
- memcpy(dev->dev_addr, iap, ETH_ALEN);
-
- /* Adjust MAC if using default MAC address */
- if (iap == fec_mac_default)
- dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index;
-}
-
-static void __inline__ fec_enable_phy_intr(void)
-{
-}
-
-static void __inline__ fec_disable_phy_intr(void)
-{
-}
-
-static void __inline__ fec_phy_ack_intr(void)
-{
-}
-
-static void __inline__ fec_localhw_setup(void)
-{
-}
-
-static void __inline__ fec_uncache(unsigned long addr)
-{
-}
-
-/* ------------------------------------------------------------------------- */
-
-#elif defined(CONFIG_M532x)
-/*
- * Code specific for M532x
- */
-static void __inline__ fec_request_intrs(struct net_device *dev)
-{
- struct fec_enet_private *fep;
- int b;
- static const struct idesc {
- char *name;
- unsigned short irq;
- } *idp, id[] = {
- { "fec(TXF)", 36 },
- { "fec(RXF)", 40 },
- { "fec(MII)", 42 },
- { NULL },
- };
-
- fep = netdev_priv(dev);
- b = (fep->index) ? 128 : 64;
-
- /* Setup interrupt handlers. */
- for (idp = id; idp->name; idp++) {
- if (request_irq(b+idp->irq, fec_enet_interrupt, IRQF_DISABLED, idp->name,dev) != 0)
- printk("FEC: Could not allocate %s IRQ(%d)!\n",
- idp->name, b+idp->irq);
- }
-
- /* Unmask interrupts */
- MCF_INTC0_ICR36 = 0x2;
- MCF_INTC0_ICR37 = 0x2;
- MCF_INTC0_ICR38 = 0x2;
- MCF_INTC0_ICR39 = 0x2;
- MCF_INTC0_ICR40 = 0x2;
- MCF_INTC0_ICR41 = 0x2;
- MCF_INTC0_ICR42 = 0x2;
- MCF_INTC0_ICR43 = 0x2;
- MCF_INTC0_ICR44 = 0x2;
- MCF_INTC0_ICR45 = 0x2;
- MCF_INTC0_ICR46 = 0x2;
- MCF_INTC0_ICR47 = 0x2;
- MCF_INTC0_ICR48 = 0x2;
-
- MCF_INTC0_IMRH &= ~(
- MCF_INTC_IMRH_INT_MASK36 |
- MCF_INTC_IMRH_INT_MASK37 |
- MCF_INTC_IMRH_INT_MASK38 |
- MCF_INTC_IMRH_INT_MASK39 |
- MCF_INTC_IMRH_INT_MASK40 |
- MCF_INTC_IMRH_INT_MASK41 |
- MCF_INTC_IMRH_INT_MASK42 |
- MCF_INTC_IMRH_INT_MASK43 |
- MCF_INTC_IMRH_INT_MASK44 |
- MCF_INTC_IMRH_INT_MASK45 |
- MCF_INTC_IMRH_INT_MASK46 |
- MCF_INTC_IMRH_INT_MASK47 |
- MCF_INTC_IMRH_INT_MASK48 );
-
- /* Set up gpio outputs for MII lines */
- MCF_GPIO_PAR_FECI2C |= (0 |
- MCF_GPIO_PAR_FECI2C_PAR_MDC_EMDC |
- MCF_GPIO_PAR_FECI2C_PAR_MDIO_EMDIO);
- MCF_GPIO_PAR_FEC = (0 |
- MCF_GPIO_PAR_FEC_PAR_FEC_7W_FEC |
- MCF_GPIO_PAR_FEC_PAR_FEC_MII_FEC);
-}
-
-static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_private *fep)
-{
- volatile fec_t *fecp;
-
- fecp = fep->hwp;
- fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04;
- fecp->fec_x_cntrl = 0x00;
-
- /*
- * Set MII speed to 2.5 MHz
- */
- fep->phy_speed = ((((MCF_CLK / 2) / (2500000 / 10)) + 5) / 10) * 2;
- fecp->fec_mii_speed = fep->phy_speed;
-
- fec_restart(dev, 0);
-}
-
+#ifdef CONFIG_M5272
static void __inline__ fec_get_mac(struct net_device *dev)
{
struct fec_enet_private *fep = netdev_priv(dev);
* Get MAC address from FLASH.
* If it is all 1's or 0's, use the default.
*/
- iap = FEC_FLASHMAC;
+ iap = (unsigned char *)FEC_FLASHMAC;
if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) &&
(iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0))
iap = fec_mac_default;
/* Adjust MAC if using default MAC address */
if (iap == fec_mac_default)
- dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index;
-}
-
-static void __inline__ fec_enable_phy_intr(void)
-{
-}
-
-static void __inline__ fec_disable_phy_intr(void)
-{
-}
-
-static void __inline__ fec_phy_ack_intr(void)
-{
-}
-
-static void __inline__ fec_localhw_setup(void)
-{
-}
-
-/*
- * Do not need to make region uncached on 532x.
- */
-static void __inline__ fec_uncache(unsigned long addr)
-{
-}
-
-/* ------------------------------------------------------------------------- */
-
-
-#else
-
-/*
- * Code specific to the MPC860T setup.
- */
-static void __inline__ fec_request_intrs(struct net_device *dev)
-{
- volatile immap_t *immap;
-
- immap = (immap_t *)IMAP_ADDR; /* pointer to internal registers */
-
- if (request_8xxirq(FEC_INTERRUPT, fec_enet_interrupt, 0, "fec", dev) != 0)
- panic("Could not allocate FEC IRQ!");
-
-#ifdef CONFIG_RPXCLASSIC
- /* Make Port C, bit 15 an input that causes interrupts.
- */
- immap->im_ioport.iop_pcpar &= ~0x0001;
- immap->im_ioport.iop_pcdir &= ~0x0001;
- immap->im_ioport.iop_pcso &= ~0x0001;
- immap->im_ioport.iop_pcint |= 0x0001;
- cpm_install_handler(CPMVEC_PIO_PC15, mii_link_interrupt, dev);
-
- /* Make LEDS reflect Link status.
- */
- *((uint *) RPX_CSR_ADDR) &= ~BCSR2_FETHLEDMODE;
-#endif
-}
-
-static void __inline__ fec_get_mac(struct net_device *dev)
-{
- bd_t *bd;
-
- bd = (bd_t *)__res;
- memcpy(dev->dev_addr, bd->bi_enetaddr, ETH_ALEN);
-
-#ifdef CONFIG_RPXCLASSIC
- /* The Embedded Planet boards have only one MAC address in
- * the EEPROM, but can have two Ethernet ports. For the
- * FEC port, we create another address by setting one of
- * the address bits above something that would have (up to
- * now) been allocated.
- */
- dev->dev_adrd[3] |= 0x80;
-#endif
-}
-
-static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_private *fep)
-{
- extern uint _get_IMMR(void);
- volatile immap_t *immap;
- volatile fec_t *fecp;
-
- fecp = fep->hwp;
- immap = (immap_t *)IMAP_ADDR; /* pointer to internal registers */
-
- /* Configure all of port D for MII.
- */
- immap->im_ioport.iop_pdpar = 0x1fff;
-
- /* Bits moved from Rev. D onward.
- */
- if ((_get_IMMR() & 0xffff) < 0x0501)
- immap->im_ioport.iop_pddir = 0x1c58; /* Pre rev. D */
- else
- immap->im_ioport.iop_pddir = 0x1fff; /* Rev. D and later */
-
- /* Set MII speed to 2.5 MHz
- */
- fecp->fec_mii_speed = fep->phy_speed =
- ((bd->bi_busfreq * 1000000) / 2500000) & 0x7e;
-}
-
-static void __inline__ fec_enable_phy_intr(void)
-{
- volatile fec_t *fecp;
-
- fecp = fep->hwp;
-
- /* Enable MII command finished interrupt
- */
- fecp->fec_ivec = (FEC_INTERRUPT/2) << 29;
-}
-
-static void __inline__ fec_disable_phy_intr(void)
-{
-}
-
-static void __inline__ fec_phy_ack_intr(void)
-{
-}
-
-static void __inline__ fec_localhw_setup(void)
-{
- volatile fec_t *fecp;
-
- fecp = fep->hwp;
- fecp->fec_r_hash = PKT_MAXBUF_SIZE;
- /* Enable big endian and don't care about SDMA FC.
- */
- fecp->fec_fun_code = 0x78000000;
-}
-
-static void __inline__ fec_uncache(unsigned long addr)
-{
- pte_t *pte;
- pte = va_to_pte(mem_addr);
- pte_val(*pte) |= _PAGE_NO_CACHE;
- flush_tlb_page(init_mm.mmap, mem_addr);
+ dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index;
}
-
#endif
/* ------------------------------------------------------------------------- */
printk("FEC: No PHY device found.\n");
/* Disable external MII interface */
fecp->fec_mii_speed = fep->phy_speed = 0;
+#ifdef HAVE_mii_link_interrupt
fec_disable_phy_intr();
+#endif
}
}
/* This interrupt occurs when the PHY detects a link change.
*/
#ifdef HAVE_mii_link_interrupt
-#ifdef CONFIG_RPXCLASSIC
-static void
-mii_link_interrupt(void *dev_id)
-#else
static irqreturn_t
mii_link_interrupt(int irq, void * dev_id)
-#endif
{
struct net_device *dev = dev_id;
struct fec_enet_private *fep = netdev_priv(dev);
}
-/* Initialize the FEC Ethernet on 860T (or ColdFire 5272).
- */
/*
* XXX: We need to clean up on failure exits here.
+ *
+ * index is only used in legacy code
*/
-int __init fec_enet_init(struct net_device *dev)
+int __init fec_enet_init(struct net_device *dev, int index)
{
struct fec_enet_private *fep = netdev_priv(dev);
unsigned long mem_addr;
cbd_t *cbd_base;
volatile fec_t *fecp;
int i, j;
- static int index = 0;
-
- /* Only allow us to be probed once. */
- if (index >= FEC_MAX_PORTS)
- return -ENXIO;
/* Allocate memory for buffer descriptors.
*/
- mem_addr = __get_free_page(GFP_KERNEL);
+ mem_addr = (unsigned long)dma_alloc_coherent(NULL, PAGE_SIZE,
+ &fep->bd_dma, GFP_KERNEL);
if (mem_addr == 0) {
printk("FEC: allocate descriptor memory failed?\n");
return -ENOMEM;
/* Create an Ethernet device instance.
*/
- fecp = (volatile fec_t *) fec_hw[index];
+ fecp = (volatile fec_t *)dev->base_addr;
fep->index = index;
fep->hwp = fecp;
fecp->fec_ecntrl = 1;
udelay(10);
- /* Set the Ethernet address. If using multiple Enets on the 8xx,
- * this needs some work to get unique addresses.
- *
- * This is our default MAC address unless the user changes
- * it via eth_mac_addr (our dev->set_mac_addr handler).
- */
+ /* Set the Ethernet address */
+#ifdef CONFIG_M5272
fec_get_mac(dev);
+#else
+ {
+ unsigned long l;
+ l = fecp->fec_addr_low;
+ dev->dev_addr[0] = (unsigned char)((l & 0xFF000000) >> 24);
+ dev->dev_addr[1] = (unsigned char)((l & 0x00FF0000) >> 16);
+ dev->dev_addr[2] = (unsigned char)((l & 0x0000FF00) >> 8);
+ dev->dev_addr[3] = (unsigned char)((l & 0x000000FF) >> 0);
+ l = fecp->fec_addr_high;
+ dev->dev_addr[4] = (unsigned char)((l & 0xFF000000) >> 24);
+ dev->dev_addr[5] = (unsigned char)((l & 0x00FF0000) >> 16);
+ }
+#endif
cbd_base = (cbd_t *)mem_addr;
- /* XXX: missing check for allocation failure */
-
- fec_uncache(mem_addr);
/* Set receive and transmit descriptor base.
*/
mem_addr = __get_free_page(GFP_KERNEL);
/* XXX: missing check for allocation failure */
- fec_uncache(mem_addr);
-
/* Initialize the BD for every fragment in the page.
*/
for (j=0; j<FEC_ENET_RX_FRPPG; j++) {
/* Set receive and transmit descriptor base.
*/
- fecp->fec_r_des_start = __pa((uint)(fep->rx_bd_base));
- fecp->fec_x_des_start = __pa((uint)(fep->tx_bd_base));
+ fecp->fec_r_des_start = fep->bd_dma;
+ fecp->fec_x_des_start = (unsigned long)fep->bd_dma + sizeof(cbd_t)
+ * RX_RING_SIZE;
- /* Install our interrupt handlers. This varies depending on
- * the architecture.
- */
- fec_request_intrs(dev);
+#ifdef HAVE_mii_link_interrupt
+ fec_request_mii_intr(dev);
+#endif
fecp->fec_grp_hash_table_high = 0;
fecp->fec_grp_hash_table_low = 0;
fecp->fec_hash_table_low = 0;
#endif
- dev->base_addr = (unsigned long)fecp;
-
/* The FEC Ethernet specific entries in the device structure. */
dev->open = fec_enet_open;
dev->hard_start_xmit = fec_enet_start_xmit;
mii_free = mii_cmds;
/* setup MII interface */
- fec_set_mii(dev, fep);
+ fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04;
+ fecp->fec_x_cntrl = 0x00;
+
+ /*
+ * Set MII speed to 2.5 MHz
+ */
+ fep->phy_speed = ((((clk_get_rate(fep->clk) / 2 + 4999999)
+ / 2500000) / 2) & 0x3F) << 1;
+ fecp->fec_mii_speed = fep->phy_speed;
+ fec_restart(dev, 0);
/* Clear and enable interrupts */
fecp->fec_ievent = 0xffc00000;
fep->phy_addr = 0;
mii_queue(dev, mk_mii_read(MII_REG_PHYIR1), mii_discover_phy);
- index++;
return 0;
}
/* Clear any outstanding interrupt.
*/
fecp->fec_ievent = 0xffc00000;
- fec_enable_phy_intr();
/* Set station address.
*/
*/
fecp->fec_r_buff_size = PKT_MAXBLR_SIZE;
- fec_localhw_setup();
-
/* Set receive and transmit descriptor base.
*/
- fecp->fec_r_des_start = __pa((uint)(fep->rx_bd_base));
- fecp->fec_x_des_start = __pa((uint)(fep->tx_bd_base));
+ fecp->fec_r_des_start = fep->bd_dma;
+ fecp->fec_x_des_start = (unsigned long)fep->bd_dma + sizeof(cbd_t)
+ * RX_RING_SIZE;
fep->dirty_tx = fep->cur_tx = fep->tx_bd_base;
fep->cur_rx = fep->rx_bd_base;
/* Clear outstanding MII command interrupts.
*/
fecp->fec_ievent = FEC_ENET_MII;
- fec_enable_phy_intr();
fecp->fec_imask = FEC_ENET_MII;
fecp->fec_mii_speed = fep->phy_speed;
}
-static int __init fec_enet_module_init(void)
+static int __devinit
+fec_probe(struct platform_device *pdev)
{
- struct net_device *dev;
- int i, err;
- DECLARE_MAC_BUF(mac);
-
- printk("FEC ENET Version 0.2\n");
-
- for (i = 0; (i < FEC_MAX_PORTS); i++) {
- dev = alloc_etherdev(sizeof(struct fec_enet_private));
- if (!dev)
- return -ENOMEM;
- err = fec_enet_init(dev);
- if (err) {
- free_netdev(dev);
- continue;
+ struct fec_enet_private *fep;
+ struct net_device *ndev;
+ int i, irq, ret = 0;
+ struct resource *r;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r)
+ return -ENXIO;
+
+ r = request_mem_region(r->start, resource_size(r), pdev->name);
+ if (!r)
+ return -EBUSY;
+
+ /* Init network device */
+ ndev = alloc_etherdev(sizeof(struct fec_enet_private));
+ if (!ndev)
+ return -ENOMEM;
+
+ SET_NETDEV_DEV(ndev, &pdev->dev);
+
+ /* setup board info structure */
+ fep = netdev_priv(ndev);
+ memset(fep, 0, sizeof(*fep));
+
+ ndev->base_addr = (unsigned long)ioremap(r->start, resource_size(r));
+
+ if (!ndev->base_addr) {
+ ret = -ENOMEM;
+ goto failed_ioremap;
+ }
+
+ platform_set_drvdata(pdev, ndev);
+
+ /* This device has up to three irqs on some platforms */
+ for (i = 0; i < 3; i++) {
+ irq = platform_get_irq(pdev, i);
+ if (i && irq < 0)
+ break;
+ ret = request_irq(irq, fec_enet_interrupt, IRQF_DISABLED, pdev->name, ndev);
+ if (ret) {
+ while (i >= 0) {
+ irq = platform_get_irq(pdev, i);
+ free_irq(irq, ndev);
+ i--;
+ }
+ goto failed_irq;
}
- if (register_netdev(dev) != 0) {
- /* XXX: missing cleanup here */
- free_netdev(dev);
- return -EIO;
+ }
+
+ fep->clk = clk_get(&pdev->dev, "fec_clk");
+ if (IS_ERR(fep->clk)) {
+ ret = PTR_ERR(fep->clk);
+ goto failed_clk;
+ }
+ clk_enable(fep->clk);
+
+ ret = fec_enet_init(ndev, 0);
+ if (ret)
+ goto failed_init;
+
+ ret = register_netdev(ndev);
+ if (ret)
+ goto failed_register;
+
+ return 0;
+
+failed_register:
+failed_init:
+ clk_disable(fep->clk);
+ clk_put(fep->clk);
+failed_clk:
+ for (i = 0; i < 3; i++) {
+ irq = platform_get_irq(pdev, i);
+ if (irq > 0)
+ free_irq(irq, ndev);
+ }
+failed_irq:
+ iounmap((void __iomem *)ndev->base_addr);
+failed_ioremap:
+ free_netdev(ndev);
+
+ return ret;
+}
+
+static int __devexit
+fec_drv_remove(struct platform_device *pdev)
+{
+ struct net_device *ndev = platform_get_drvdata(pdev);
+ struct fec_enet_private *fep = netdev_priv(ndev);
+
+ platform_set_drvdata(pdev, NULL);
+
+ fec_stop(ndev);
+ clk_disable(fep->clk);
+ clk_put(fep->clk);
+ iounmap((void __iomem *)ndev->base_addr);
+ unregister_netdev(ndev);
+ free_netdev(ndev);
+ return 0;
+}
+
+static int
+fec_suspend(struct platform_device *dev, pm_message_t state)
+{
+ struct net_device *ndev = platform_get_drvdata(dev);
+ struct fec_enet_private *fep;
+
+ if (ndev) {
+ fep = netdev_priv(ndev);
+ if (netif_running(ndev)) {
+ netif_device_detach(ndev);
+ fec_stop(ndev);
}
+ }
+ return 0;
+}
- printk("%s: ethernet %s\n",
- dev->name, print_mac(mac, dev->dev_addr));
+static int
+fec_resume(struct platform_device *dev)
+{
+ struct net_device *ndev = platform_get_drvdata(dev);
+
+ if (ndev) {
+ if (netif_running(ndev)) {
+ fec_enet_init(ndev, 0);
+ netif_device_attach(ndev);
+ }
}
return 0;
}
+static struct platform_driver fec_driver = {
+ .driver = {
+ .name = "fec",
+ .owner = THIS_MODULE,
+ },
+ .probe = fec_probe,
+ .remove = __devexit_p(fec_drv_remove),
+ .suspend = fec_suspend,
+ .resume = fec_resume,
+};
+
+static int __init
+fec_enet_module_init(void)
+{
+ printk(KERN_INFO "FEC Ethernet Driver\n");
+
+ return platform_driver_register(&fec_driver);
+}
+
+static void __exit
+fec_enet_cleanup(void)
+{
+ platform_driver_unregister(&fec_driver);
+}
+
+module_exit(fec_enet_cleanup);
module_init(fec_enet_module_init);
MODULE_LICENSE("GPL");
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff