* Fast Ethernet Controller (FEC) driver for Motorola MPC8xx.
* Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
*
- * This version of the driver is specific to the FADS implementation,
- * since the board contains control registers external to the processor
- * for the control of the LevelOne LXT970 transceiver. The MPC860T manual
- * describes connections using the internal parallel port I/O, which
- * is basically all of Port D.
- *
* Right now, I am very wasteful with the buffers. I allocate memory
* pages and then divide them into 2K frame buffers. This way I know I
* have buffers large enough to hold one frame within one buffer descriptor.
* Copyright (c) 2004-2006 Macq Electronique SA.
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/spinlock.h>
#include <linux/workqueue.h>
#include <linux/bitops.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
+#include <asm/cacheflush.h>
-#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || \
- defined(CONFIG_M5272) || defined(CONFIG_M528x) || \
- defined(CONFIG_M520x) || defined(CONFIG_M532x)
+#ifndef CONFIG_ARCH_MXC
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
-#include "fec.h"
-#else
-#include <asm/8xx_immap.h>
-#include <asm/mpc8xx.h>
-#include "commproc.h"
#endif
-#if defined(CONFIG_FEC2)
-#define FEC_MAX_PORTS 2
+#include "fec.h"
+
+#ifdef CONFIG_ARCH_MXC
+#include <mach/hardware.h>
+#define FEC_ALIGNMENT 0xf
#else
-#define FEC_MAX_PORTS 1
+#define FEC_ALIGNMENT 0x3
#endif
/*
* Define the fixed address of the FEC hardware.
*/
-static unsigned int fec_hw[] = {
#if defined(CONFIG_M5272)
- (MCF_MBAR + 0x840),
-#elif defined(CONFIG_M527x)
- (MCF_MBAR + 0x1000),
- (MCF_MBAR + 0x1800),
-#elif defined(CONFIG_M523x) || defined(CONFIG_M528x)
- (MCF_MBAR + 0x1000),
-#elif defined(CONFIG_M520x)
- (MCF_MBAR+0x30000),
-#elif defined(CONFIG_M532x)
- (MCF_MBAR+0xfc030000),
-#else
- &(((immap_t *)IMAP_ADDR)->im_cpm.cp_fec),
-#endif
-};
+#define HAVE_mii_link_interrupt
static unsigned char fec_mac_default[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
#define FEC_FLASHMAC 0xf0006006
#elif defined(CONFIG_GILBARCONAP) || defined(CONFIG_SCALES)
#define FEC_FLASHMAC 0xf0006000
-#elif defined (CONFIG_MTD_KeyTechnology)
-#define FEC_FLASHMAC 0xffe04000
#elif defined(CONFIG_CANCam)
#define FEC_FLASHMAC 0xf0020000
#elif defined (CONFIG_M5272C3)
#else
#define FEC_FLASHMAC 0
#endif
+#endif /* CONFIG_M5272 */
/* Forward declarations of some structures to support different PHYs
*/
* account when setting it.
*/
#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
- defined(CONFIG_M520x) || defined(CONFIG_M532x)
+ defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_ARCH_MXC)
#define OPT_FRAME_SIZE (PKT_MAXBUF_SIZE << 16)
#else
#define OPT_FRAME_SIZE 0
/* Hardware registers of the FEC device */
volatile fec_t *hwp;
+ struct net_device *netdev;
+
+ struct clk *clk;
+
/* The saved address of a sent-in-place packet/buffer, for skfree(). */
unsigned char *tx_bounce[TX_RING_SIZE];
struct sk_buff* tx_skbuff[TX_RING_SIZE];
/* CPM dual port RAM relative addresses.
*/
+ dma_addr_t bd_dma;
cbd_t *rx_bd_base; /* Address of Rx and Tx buffers. */
cbd_t *tx_bd_base;
cbd_t *cur_rx, *cur_tx; /* The next free ring entry */
cbd_t *dirty_tx; /* The ring entries to be free()ed. */
- struct net_device_stats stats;
uint tx_full;
- spinlock_t lock;
+ /* hold while accessing the HW like ringbuffer for tx/rx but not MAC */
+ spinlock_t hw_lock;
+ /* hold while accessing the mii_list_t() elements */
+ spinlock_t mii_lock;
uint phy_id;
uint phy_id_done;
static int fec_enet_open(struct net_device *dev);
static int fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev);
static void fec_enet_mii(struct net_device *dev);
-static irqreturn_t fec_enet_interrupt(int irq, void * dev_id, struct pt_regs * regs);
+static irqreturn_t fec_enet_interrupt(int irq, void * dev_id);
static void fec_enet_tx(struct net_device *dev);
static void fec_enet_rx(struct net_device *dev);
static int fec_enet_close(struct net_device *dev);
-static struct net_device_stats *fec_enet_get_stats(struct net_device *dev);
static void set_multicast_list(struct net_device *dev);
static void fec_restart(struct net_device *dev, int duplex);
static void fec_stop(struct net_device *dev);
static mii_list_t *mii_head;
static mii_list_t *mii_tail;
-static int mii_queue(struct net_device *dev, int request,
+static int mii_queue(struct net_device *dev, int request,
void (*func)(uint, struct net_device *));
/* Make MII read/write commands for the FEC.
#define MII_REG_SR 1 /* Status Register */
#define MII_REG_PHYIR1 2 /* PHY Identification Register 1 */
#define MII_REG_PHYIR2 3 /* PHY Identification Register 2 */
-#define MII_REG_ANAR 4 /* A-N Advertisement Register */
+#define MII_REG_ANAR 4 /* A-N Advertisement Register */
#define MII_REG_ANLPAR 5 /* A-N Link Partner Ability Register */
#define MII_REG_ANER 6 /* A-N Expansion Register */
#define MII_REG_ANNPTR 7 /* A-N Next Page Transmit Register */
#define PHY_CONF_LOOP 0x0002 /* 1 loopback mode enabled */
#define PHY_CONF_SPMASK 0x00f0 /* mask for speed */
#define PHY_CONF_10HDX 0x0010 /* 10 Mbit half duplex supported */
-#define PHY_CONF_10FDX 0x0020 /* 10 Mbit full duplex supported */
+#define PHY_CONF_10FDX 0x0020 /* 10 Mbit full duplex supported */
#define PHY_CONF_100HDX 0x0040 /* 100 Mbit half duplex supported */
-#define PHY_CONF_100FDX 0x0080 /* 100 Mbit full duplex supported */
+#define PHY_CONF_100FDX 0x0080 /* 100 Mbit full duplex supported */
#define PHY_STAT_LINK 0x0100 /* 1 up - 0 down */
#define PHY_STAT_FAULT 0x0200 /* 1 remote fault */
#define PHY_STAT_ANC 0x0400 /* 1 auto-negotiation complete */
#define PHY_STAT_SPMASK 0xf000 /* mask for speed */
#define PHY_STAT_10HDX 0x1000 /* 10 Mbit half duplex selected */
-#define PHY_STAT_10FDX 0x2000 /* 10 Mbit full duplex selected */
+#define PHY_STAT_10FDX 0x2000 /* 10 Mbit full duplex selected */
#define PHY_STAT_100HDX 0x4000 /* 100 Mbit half duplex selected */
-#define PHY_STAT_100FDX 0x8000 /* 100 Mbit full duplex selected */
+#define PHY_STAT_100FDX 0x8000 /* 100 Mbit full duplex selected */
static int
struct fec_enet_private *fep;
volatile fec_t *fecp;
volatile cbd_t *bdp;
+ unsigned short status;
+ unsigned long flags;
fep = netdev_priv(dev);
fecp = (volatile fec_t*)dev->base_addr;
return 1;
}
+ spin_lock_irqsave(&fep->hw_lock, flags);
/* Fill in a Tx ring entry */
bdp = fep->cur_tx;
+ status = bdp->cbd_sc;
#ifndef final_version
- if (bdp->cbd_sc & BD_ENET_TX_READY) {
+ if (status & BD_ENET_TX_READY) {
/* Ooops. All transmit buffers are full. Bail out.
* This should not happen, since dev->tbusy should be set.
*/
printk("%s: tx queue full!.\n", dev->name);
+ spin_unlock_irqrestore(&fep->hw_lock, flags);
return 1;
}
#endif
/* Clear all of the status flags.
*/
- bdp->cbd_sc &= ~BD_ENET_TX_STATS;
+ status &= ~BD_ENET_TX_STATS;
/* Set buffer length and buffer pointer.
*/
* 4-byte boundaries. Use bounce buffers to copy data
* and get it aligned. Ugh.
*/
- if (bdp->cbd_bufaddr & 0x3) {
+ if (bdp->cbd_bufaddr & FEC_ALIGNMENT) {
unsigned int index;
index = bdp - fep->tx_bd_base;
- memcpy(fep->tx_bounce[index], (void *) bdp->cbd_bufaddr, bdp->cbd_datlen);
+ memcpy(fep->tx_bounce[index], (void *)skb->data, skb->len);
bdp->cbd_bufaddr = __pa(fep->tx_bounce[index]);
}
*/
fep->tx_skbuff[fep->skb_cur] = skb;
- fep->stats.tx_bytes += skb->len;
+ dev->stats.tx_bytes += skb->len;
fep->skb_cur = (fep->skb_cur+1) & TX_RING_MOD_MASK;
-
+
/* Push the data cache so the CPM does not get stale memory
* data.
*/
- flush_dcache_range((unsigned long)skb->data,
- (unsigned long)skb->data + skb->len);
-
- spin_lock_irq(&fep->lock);
+ dma_sync_single(NULL, bdp->cbd_bufaddr,
+ bdp->cbd_datlen, DMA_TO_DEVICE);
- /* Send it on its way. Tell FEC its ready, interrupt when done,
- * its the last BD of the frame, and to put the CRC on the end.
+ /* Send it on its way. Tell FEC it's ready, interrupt when done,
+ * it's the last BD of the frame, and to put the CRC on the end.
*/
- bdp->cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_INTR
+ status |= (BD_ENET_TX_READY | BD_ENET_TX_INTR
| BD_ENET_TX_LAST | BD_ENET_TX_TC);
+ bdp->cbd_sc = status;
dev->trans_start = jiffies;
/* Trigger transmission start */
- fecp->fec_x_des_active = 0x01000000;
+ fecp->fec_x_des_active = 0;
/* If this was the last BD in the ring, start at the beginning again.
*/
- if (bdp->cbd_sc & BD_ENET_TX_WRAP) {
+ if (status & BD_ENET_TX_WRAP) {
bdp = fep->tx_bd_base;
} else {
bdp++;
fep->cur_tx = (cbd_t *)bdp;
- spin_unlock_irq(&fep->lock);
+ spin_unlock_irqrestore(&fep->hw_lock, flags);
return 0;
}
struct fec_enet_private *fep = netdev_priv(dev);
printk("%s: transmit timed out.\n", dev->name);
- fep->stats.tx_errors++;
+ dev->stats.tx_errors++;
#ifndef final_version
{
int i;
bdp = fep->tx_bd_base;
printk(" tx: %u buffers\n", TX_RING_SIZE);
for (i = 0 ; i < TX_RING_SIZE; i++) {
- printk(" %08x: %04x %04x %08x\n",
+ printk(" %08x: %04x %04x %08x\n",
(uint) bdp,
bdp->cbd_sc,
bdp->cbd_datlen,
* This is called from the MPC core interrupt.
*/
static irqreturn_t
-fec_enet_interrupt(int irq, void * dev_id, struct pt_regs * regs)
+fec_enet_interrupt(int irq, void * dev_id)
{
struct net_device *dev = dev_id;
volatile fec_t *fecp;
uint int_events;
- int handled = 0;
+ irqreturn_t ret = IRQ_NONE;
fecp = (volatile fec_t*)dev->base_addr;
/* Get the interrupt events that caused us to be here.
*/
- while ((int_events = fecp->fec_ievent) != 0) {
+ do {
+ int_events = fecp->fec_ievent;
fecp->fec_ievent = int_events;
/* Handle receive event in its own function.
*/
if (int_events & FEC_ENET_RXF) {
- handled = 1;
+ ret = IRQ_HANDLED;
fec_enet_rx(dev);
}
them as part of the transmit process.
*/
if (int_events & FEC_ENET_TXF) {
- handled = 1;
+ ret = IRQ_HANDLED;
fec_enet_tx(dev);
}
if (int_events & FEC_ENET_MII) {
- handled = 1;
+ ret = IRQ_HANDLED;
fec_enet_mii(dev);
}
-
- }
- return IRQ_RETVAL(handled);
+
+ } while (int_events);
+
+ return ret;
}
{
struct fec_enet_private *fep;
volatile cbd_t *bdp;
+ unsigned short status;
struct sk_buff *skb;
fep = netdev_priv(dev);
- spin_lock(&fep->lock);
+ spin_lock_irq(&fep->hw_lock);
bdp = fep->dirty_tx;
- while ((bdp->cbd_sc&BD_ENET_TX_READY) == 0) {
+ while (((status = bdp->cbd_sc) & BD_ENET_TX_READY) == 0) {
if (bdp == fep->cur_tx && fep->tx_full == 0) break;
skb = fep->tx_skbuff[fep->skb_dirty];
/* Check for errors. */
- if (bdp->cbd_sc & (BD_ENET_TX_HB | BD_ENET_TX_LC |
+ if (status & (BD_ENET_TX_HB | BD_ENET_TX_LC |
BD_ENET_TX_RL | BD_ENET_TX_UN |
BD_ENET_TX_CSL)) {
- fep->stats.tx_errors++;
- if (bdp->cbd_sc & BD_ENET_TX_HB) /* No heartbeat */
- fep->stats.tx_heartbeat_errors++;
- if (bdp->cbd_sc & BD_ENET_TX_LC) /* Late collision */
- fep->stats.tx_window_errors++;
- if (bdp->cbd_sc & BD_ENET_TX_RL) /* Retrans limit */
- fep->stats.tx_aborted_errors++;
- if (bdp->cbd_sc & BD_ENET_TX_UN) /* Underrun */
- fep->stats.tx_fifo_errors++;
- if (bdp->cbd_sc & BD_ENET_TX_CSL) /* Carrier lost */
- fep->stats.tx_carrier_errors++;
+ dev->stats.tx_errors++;
+ if (status & BD_ENET_TX_HB) /* No heartbeat */
+ dev->stats.tx_heartbeat_errors++;
+ if (status & BD_ENET_TX_LC) /* Late collision */
+ dev->stats.tx_window_errors++;
+ if (status & BD_ENET_TX_RL) /* Retrans limit */
+ dev->stats.tx_aborted_errors++;
+ if (status & BD_ENET_TX_UN) /* Underrun */
+ dev->stats.tx_fifo_errors++;
+ if (status & BD_ENET_TX_CSL) /* Carrier lost */
+ dev->stats.tx_carrier_errors++;
} else {
- fep->stats.tx_packets++;
+ dev->stats.tx_packets++;
}
#ifndef final_version
- if (bdp->cbd_sc & BD_ENET_TX_READY)
+ if (status & BD_ENET_TX_READY)
printk("HEY! Enet xmit interrupt and TX_READY.\n");
#endif
/* Deferred means some collisions occurred during transmit,
* but we eventually sent the packet OK.
*/
- if (bdp->cbd_sc & BD_ENET_TX_DEF)
- fep->stats.collisions++;
-
+ if (status & BD_ENET_TX_DEF)
+ dev->stats.collisions++;
+
/* Free the sk buffer associated with this last transmit.
*/
dev_kfree_skb_any(skb);
fep->tx_skbuff[fep->skb_dirty] = NULL;
fep->skb_dirty = (fep->skb_dirty + 1) & TX_RING_MOD_MASK;
-
+
/* Update pointer to next buffer descriptor to be transmitted.
*/
- if (bdp->cbd_sc & BD_ENET_TX_WRAP)
+ if (status & BD_ENET_TX_WRAP)
bdp = fep->tx_bd_base;
else
bdp++;
-
+
/* Since we have freed up a buffer, the ring is no longer
* full.
*/
}
}
fep->dirty_tx = (cbd_t *)bdp;
- spin_unlock(&fep->lock);
+ spin_unlock_irq(&fep->hw_lock);
}
struct fec_enet_private *fep;
volatile fec_t *fecp;
volatile cbd_t *bdp;
+ unsigned short status;
struct sk_buff *skb;
ushort pkt_len;
__u8 *data;
+#ifdef CONFIG_M532x
+ flush_cache_all();
+#endif
+
fep = netdev_priv(dev);
fecp = (volatile fec_t*)dev->base_addr;
+ spin_lock_irq(&fep->hw_lock);
+
/* First, grab all of the stats for the incoming packet.
* These get messed up if we get called due to a busy condition.
*/
bdp = fep->cur_rx;
-while (!(bdp->cbd_sc & BD_ENET_RX_EMPTY)) {
+while (!((status = bdp->cbd_sc) & BD_ENET_RX_EMPTY)) {
#ifndef final_version
/* Since we have allocated space to hold a complete frame,
* the last indicator should be set.
*/
- if ((bdp->cbd_sc & BD_ENET_RX_LAST) == 0)
+ if ((status & BD_ENET_RX_LAST) == 0)
printk("FEC ENET: rcv is not +last\n");
#endif
goto rx_processing_done;
/* Check for errors. */
- if (bdp->cbd_sc & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_NO |
+ if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_NO |
BD_ENET_RX_CR | BD_ENET_RX_OV)) {
- fep->stats.rx_errors++;
- if (bdp->cbd_sc & (BD_ENET_RX_LG | BD_ENET_RX_SH)) {
+ dev->stats.rx_errors++;
+ if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH)) {
/* Frame too long or too short. */
- fep->stats.rx_length_errors++;
+ dev->stats.rx_length_errors++;
}
- if (bdp->cbd_sc & BD_ENET_RX_NO) /* Frame alignment */
- fep->stats.rx_frame_errors++;
- if (bdp->cbd_sc & BD_ENET_RX_CR) /* CRC Error */
- fep->stats.rx_crc_errors++;
- if (bdp->cbd_sc & BD_ENET_RX_OV) /* FIFO overrun */
- fep->stats.rx_crc_errors++;
+ if (status & BD_ENET_RX_NO) /* Frame alignment */
+ dev->stats.rx_frame_errors++;
+ if (status & BD_ENET_RX_CR) /* CRC Error */
+ dev->stats.rx_crc_errors++;
+ if (status & BD_ENET_RX_OV) /* FIFO overrun */
+ dev->stats.rx_fifo_errors++;
}
/* Report late collisions as a frame error.
* On this error, the BD is closed, but we don't know what we
* have in the buffer. So, just drop this frame on the floor.
*/
- if (bdp->cbd_sc & BD_ENET_RX_CL) {
- fep->stats.rx_errors++;
- fep->stats.rx_frame_errors++;
+ if (status & BD_ENET_RX_CL) {
+ dev->stats.rx_errors++;
+ dev->stats.rx_frame_errors++;
goto rx_processing_done;
}
/* Process the incoming frame.
*/
- fep->stats.rx_packets++;
+ dev->stats.rx_packets++;
pkt_len = bdp->cbd_datlen;
- fep->stats.rx_bytes += pkt_len;
+ dev->stats.rx_bytes += pkt_len;
data = (__u8*)__va(bdp->cbd_bufaddr);
+ dma_sync_single(NULL, (unsigned long)__pa(data),
+ pkt_len - 4, DMA_FROM_DEVICE);
+
/* This does 16 byte alignment, exactly what we need.
* The packet length includes FCS, but we don't want to
* include that when passing upstream as it messes up
if (skb == NULL) {
printk("%s: Memory squeeze, dropping packet.\n", dev->name);
- fep->stats.rx_dropped++;
+ dev->stats.rx_dropped++;
} else {
- skb->dev = dev;
skb_put(skb,pkt_len-4); /* Make room */
- eth_copy_and_sum(skb,
- (unsigned char *)__va(bdp->cbd_bufaddr),
- pkt_len-4, 0);
+ skb_copy_to_linear_data(skb, data, pkt_len-4);
skb->protocol=eth_type_trans(skb,dev);
netif_rx(skb);
}
/* Clear the status flags for this buffer.
*/
- bdp->cbd_sc &= ~BD_ENET_RX_STATS;
+ status &= ~BD_ENET_RX_STATS;
/* Mark the buffer empty.
*/
- bdp->cbd_sc |= BD_ENET_RX_EMPTY;
+ status |= BD_ENET_RX_EMPTY;
+ bdp->cbd_sc = status;
/* Update BD pointer to next entry.
*/
- if (bdp->cbd_sc & BD_ENET_RX_WRAP)
+ if (status & BD_ENET_RX_WRAP)
bdp = fep->rx_bd_base;
else
bdp++;
-
+
#if 1
/* Doing this here will keep the FEC running while we process
* incoming frames. On a heavily loaded network, we should be
* able to keep up at the expense of system resources.
*/
- fecp->fec_r_des_active = 0x01000000;
+ fecp->fec_r_des_active = 0;
#endif
- } /* while (!(bdp->cbd_sc & BD_ENET_RX_EMPTY)) */
+ } /* while (!((status = bdp->cbd_sc) & BD_ENET_RX_EMPTY)) */
fep->cur_rx = (cbd_t *)bdp;
#if 0
* our way back to the interrupt return only to come right back
* here.
*/
- fecp->fec_r_des_active = 0x01000000;
+ fecp->fec_r_des_active = 0;
#endif
+
+ spin_unlock_irq(&fep->hw_lock);
}
+/* called from interrupt context */
static void
fec_enet_mii(struct net_device *dev)
{
uint mii_reg;
fep = netdev_priv(dev);
+ spin_lock_irq(&fep->mii_lock);
+
ep = fep->hwp;
mii_reg = ep->fec_mii_data;
-
+
if ((mip = mii_head) == NULL) {
printk("MII and no head!\n");
- return;
+ goto unlock;
}
if (mip->mii_func != NULL)
if ((mip = mii_head) != NULL)
ep->fec_mii_data = mip->mii_regval;
+
+unlock:
+ spin_unlock_irq(&fep->mii_lock);
}
static int
/* Add PHY address to register command.
*/
fep = netdev_priv(dev);
- regval |= fep->phy_addr << 23;
+ spin_lock_irqsave(&fep->mii_lock, flags);
+ regval |= fep->phy_addr << 23;
retval = 0;
- save_flags(flags);
- cli();
-
if ((mip = mii_free) != NULL) {
mii_free = mip->mii_next;
mip->mii_regval = regval;
if (mii_head) {
mii_tail->mii_next = mip;
mii_tail = mip;
- }
- else {
+ } else {
mii_head = mii_tail = mip;
fep->hwp->fec_mii_data = regval;
}
- }
- else {
+ } else {
retval = 1;
}
- restore_flags(flags);
-
- return(retval);
+ spin_unlock_irqrestore(&fep->mii_lock, flags);
+ return retval;
}
static void mii_do_cmd(struct net_device *dev, const phy_cmd_t *c)
{
- int k;
-
if(!c)
return;
- for(k = 0; (c+k)->mii_data != mk_mii_end; k++) {
- mii_queue(dev, (c+k)->mii_data, (c+k)->funct);
- }
+ for (; c->mii_data != mk_mii_end; c++)
+ mii_queue(dev, c->mii_data, c->funct);
}
static void mii_parse_sr(uint mii_reg, struct net_device *dev)
status |= PHY_STAT_FAULT;
if (mii_reg & 0x0020)
status |= PHY_STAT_ANC;
-
*s = status;
}
{ mk_mii_end, }
};
static phy_info_t const phy_info_lxt970 = {
- .id = 0x07810000,
+ .id = 0x07810000,
.name = "LXT970",
.config = phy_cmd_lxt970_config,
.startup = phy_cmd_lxt970_startup,
.ack_int = phy_cmd_lxt970_ack_int,
.shutdown = phy_cmd_lxt970_shutdown
};
-
+
/* ------------------------------------------------------------------------- */
/* The Level one LXT971 is used on some of my custom boards */
#define MII_LXT971_LCR 20 /* LED Control Register */
#define MII_LXT971_TCR 30 /* Transmit Control Register */
-/*
+/*
* I had some nice ideas of running the MDIO faster...
* The 971 should support 8MHz and I tried it, but things acted really
* weird, so 2.5 MHz ought to be enough for anyone...
*s = status;
}
-
+
static phy_cmd_t const phy_cmd_lxt971_config[] = {
- /* limit to 10MBit because my prototype board
+ /* limit to 10MBit because my prototype board
* doesn't work with 100. */
{ mk_mii_read(MII_REG_CR), mii_parse_cr },
{ mk_mii_read(MII_REG_ANAR), mii_parse_anar },
/* Somehow does the 971 tell me that the link is down
* the first read after power-up.
* read here to get a valid value in ack_int */
- { mk_mii_read(MII_REG_SR), mii_parse_sr },
+ { mk_mii_read(MII_REG_SR), mii_parse_sr },
{ mk_mii_end, }
};
static phy_cmd_t const phy_cmd_lxt971_ack_int[] = {
{ mk_mii_end, }
};
static phy_info_t const phy_info_lxt971 = {
- .id = 0x0001378e,
+ .id = 0x0001378e,
.name = "LXT971",
.config = phy_cmd_lxt971_config,
.startup = phy_cmd_lxt971_startup,
}
static phy_cmd_t const phy_cmd_qs6612_config[] = {
- /* The PHY powers up isolated on the RPX,
+ /* The PHY powers up isolated on the RPX,
* so send a command to allow operation.
*/
{ mk_mii_write(MII_QS6612_PCR, 0x0dc0), NULL },
{ mk_mii_end, }
};
static phy_info_t const phy_info_qs6612 = {
- .id = 0x00181440,
+ .id = 0x00181440,
.name = "QS6612",
.config = phy_cmd_qs6612_config,
.startup = phy_cmd_qs6612_startup,
static phy_cmd_t const phy_cmd_am79c874_startup[] = { /* enable interrupts */
{ mk_mii_write(MII_AM79C874_ICSR, 0xff00), NULL },
{ mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
- { mk_mii_read(MII_REG_SR), mii_parse_sr },
+ { mk_mii_read(MII_REG_SR), mii_parse_sr },
{ mk_mii_end, }
};
static phy_cmd_t const phy_cmd_am79c874_ack_int[] = {
/* register definitions for the 8721 */
#define MII_KS8721BL_RXERCR 21
-#define MII_KS8721BL_ICSR 22
+#define MII_KS8721BL_ICSR 27
#define MII_KS8721BL_PHYCR 31
static phy_cmd_t const phy_cmd_ks8721bl_config[] = {
static phy_cmd_t const phy_cmd_ks8721bl_startup[] = { /* enable interrupts */
{ mk_mii_write(MII_KS8721BL_ICSR, 0xff00), NULL },
{ mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
- { mk_mii_read(MII_REG_SR), mii_parse_sr },
+ { mk_mii_read(MII_REG_SR), mii_parse_sr },
{ mk_mii_end, }
};
static phy_cmd_t const phy_cmd_ks8721bl_ack_int[] = {
{ mk_mii_end, }
};
static phy_info_t const phy_info_ks8721bl = {
- .id = 0x00022161,
+ .id = 0x00022161,
.name = "KS8721BL",
.config = phy_cmd_ks8721bl_config,
.startup = phy_cmd_ks8721bl_startup,
static void mii_parse_dp8384x_sr2(uint mii_reg, struct net_device *dev)
{
- struct fec_enet_private *fep = dev->priv;
+ struct fec_enet_private *fep = netdev_priv(dev);
volatile uint *s = &(fep->phy_status);
*s &= ~(PHY_STAT_SPMASK | PHY_STAT_LINK | PHY_STAT_ANC);
};
/* ------------------------------------------------------------------------- */
-#if !defined(CONFIG_M532x)
-#ifdef CONFIG_RPXCLASSIC
-static void
-mii_link_interrupt(void *dev_id);
-#else
+#ifdef HAVE_mii_link_interrupt
static irqreturn_t
-mii_link_interrupt(int irq, void * dev_id, struct pt_regs * regs);
-#endif
-#endif
-
-#if defined(CONFIG_M5272)
+mii_link_interrupt(int irq, void * dev_id);
/*
- * Code specific to Coldfire 5272 setup.
+ * This is specific to the MII interrupt setup of the M5272EVB.
*/
-static void __inline__ fec_request_intrs(struct net_device *dev)
-{
- volatile unsigned long *icrp;
- static const struct idesc {
- char *name;
- unsigned short irq;
- irqreturn_t (*handler)(int, void *, struct pt_regs *);
- } *idp, id[] = {
- { "fec(RX)", 86, fec_enet_interrupt },
- { "fec(TX)", 87, fec_enet_interrupt },
- { "fec(OTHER)", 88, fec_enet_interrupt },
- { "fec(MII)", 66, mii_link_interrupt },
- { NULL },
- };
-
- /* Setup interrupt handlers. */
- for (idp = id; idp->name; idp++) {
- if (request_irq(idp->irq, idp->handler, 0, idp->name, dev) != 0)
- printk("FEC: Could not allocate %s IRQ(%d)!\n", idp->name, idp->irq);
- }
-
- /* Unmask interrupt at ColdFire 5272 SIM */
- icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR3);
- *icrp = 0x00000ddd;
- icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
- *icrp = (*icrp & 0x70777777) | 0x0d000000;
-}
-
-static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_private *fep)
-{
- volatile fec_t *fecp;
-
- fecp = fep->hwp;
- fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04;
- fecp->fec_x_cntrl = 0x00;
-
- /*
- * Set MII speed to 2.5 MHz
- * See 5272 manual section 11.5.8: MSCR
- */
- fep->phy_speed = ((((MCF_CLK / 4) / (2500000 / 10)) + 5) / 10) * 2;
- fecp->fec_mii_speed = fep->phy_speed;
-
- fec_restart(dev, 0);
-}
-
-static void __inline__ fec_get_mac(struct net_device *dev)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
- volatile fec_t *fecp;
- unsigned char *iap, tmpaddr[ETH_ALEN];
-
- fecp = fep->hwp;
-
- if (FEC_FLASHMAC) {
- /*
- * Get MAC address from FLASH.
- * If it is all 1's or 0's, use the default.
- */
- iap = (unsigned char *)FEC_FLASHMAC;
- if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) &&
- (iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0))
- iap = fec_mac_default;
- if ((iap[0] == 0xff) && (iap[1] == 0xff) && (iap[2] == 0xff) &&
- (iap[3] == 0xff) && (iap[4] == 0xff) && (iap[5] == 0xff))
- iap = fec_mac_default;
- } else {
- *((unsigned long *) &tmpaddr[0]) = fecp->fec_addr_low;
- *((unsigned short *) &tmpaddr[4]) = (fecp->fec_addr_high >> 16);
- iap = &tmpaddr[0];
- }
-
- memcpy(dev->dev_addr, iap, ETH_ALEN);
-
- /* Adjust MAC if using default MAC address */
- if (iap == fec_mac_default)
- dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index;
-}
-
-static void __inline__ fec_enable_phy_intr(void)
+static void __inline__ fec_request_mii_intr(struct net_device *dev)
{
+ if (request_irq(66, mii_link_interrupt, IRQF_DISABLED, "fec(MII)", dev) != 0)
+ printk("FEC: Could not allocate fec(MII) IRQ(66)!\n");
}
static void __inline__ fec_disable_phy_intr(void)
{
volatile unsigned long *icrp;
icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
- *icrp = (*icrp & 0x70777777) | 0x08000000;
+ *icrp = 0x08000000;
}
static void __inline__ fec_phy_ack_intr(void)
volatile unsigned long *icrp;
/* Acknowledge the interrupt */
icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
- *icrp = (*icrp & 0x77777777) | 0x08000000;
+ *icrp = 0x0d000000;
}
-
-static void __inline__ fec_localhw_setup(void)
-{
-}
-
-/*
- * Do not need to make region uncached on 5272.
- */
-static void __inline__ fec_uncache(unsigned long addr)
-{
-}
-
-/* ------------------------------------------------------------------------- */
-
-#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
-
-/*
- * Code specific to Coldfire 5230/5231/5232/5234/5235,
- * the 5270/5271/5274/5275 and 5280/5282 setups.
- */
-static void __inline__ fec_request_intrs(struct net_device *dev)
-{
- struct fec_enet_private *fep;
- int b;
- static const struct idesc {
- char *name;
- unsigned short irq;
- } *idp, id[] = {
- { "fec(TXF)", 23 },
- { "fec(TXB)", 24 },
- { "fec(TXFIFO)", 25 },
- { "fec(TXCR)", 26 },
- { "fec(RXF)", 27 },
- { "fec(RXB)", 28 },
- { "fec(MII)", 29 },
- { "fec(LC)", 30 },
- { "fec(HBERR)", 31 },
- { "fec(GRA)", 32 },
- { "fec(EBERR)", 33 },
- { "fec(BABT)", 34 },
- { "fec(BABR)", 35 },
- { NULL },
- };
-
- fep = netdev_priv(dev);
- b = (fep->index) ? 128 : 64;
-
- /* Setup interrupt handlers. */
- for (idp = id; idp->name; idp++) {
- if (request_irq(b+idp->irq, fec_enet_interrupt, 0, idp->name, dev) != 0)
- printk("FEC: Could not allocate %s IRQ(%d)!\n", idp->name, b+idp->irq);
- }
-
- /* Unmask interrupts at ColdFire 5280/5282 interrupt controller */
- {
- volatile unsigned char *icrp;
- volatile unsigned long *imrp;
- int i;
-
- b = (fep->index) ? MCFICM_INTC1 : MCFICM_INTC0;
- icrp = (volatile unsigned char *) (MCF_IPSBAR + b +
- MCFINTC_ICR0);
- for (i = 23; (i < 36); i++)
- icrp[i] = 0x23;
-
- imrp = (volatile unsigned long *) (MCF_IPSBAR + b +
- MCFINTC_IMRH);
- *imrp &= ~0x0000000f;
- imrp = (volatile unsigned long *) (MCF_IPSBAR + b +
- MCFINTC_IMRL);
- *imrp &= ~0xff800001;
- }
-
-#if defined(CONFIG_M528x)
- /* Set up gpio outputs for MII lines */
- {
- volatile u16 *gpio_paspar;
- volatile u8 *gpio_pehlpar;
-
- gpio_paspar = (volatile u16 *) (MCF_IPSBAR + 0x100056);
- gpio_pehlpar = (volatile u16 *) (MCF_IPSBAR + 0x100058);
- *gpio_paspar |= 0x0f00;
- *gpio_pehlpar = 0xc0;
- }
#endif
-}
-
-static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_private *fep)
-{
- volatile fec_t *fecp;
-
- fecp = fep->hwp;
- fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04;
- fecp->fec_x_cntrl = 0x00;
-
- /*
- * Set MII speed to 2.5 MHz
- * See 5282 manual section 17.5.4.7: MSCR
- */
- fep->phy_speed = ((((MCF_CLK / 2) / (2500000 / 10)) + 5) / 10) * 2;
- fecp->fec_mii_speed = fep->phy_speed;
-
- fec_restart(dev, 0);
-}
+#ifdef CONFIG_M5272
static void __inline__ fec_get_mac(struct net_device *dev)
{
struct fec_enet_private *fep = netdev_priv(dev);
* Get MAC address from FLASH.
* If it is all 1's or 0's, use the default.
*/
- iap = FEC_FLASHMAC;
- if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) &&
- (iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0))
- iap = fec_mac_default;
- if ((iap[0] == 0xff) && (iap[1] == 0xff) && (iap[2] == 0xff) &&
- (iap[3] == 0xff) && (iap[4] == 0xff) && (iap[5] == 0xff))
- iap = fec_mac_default;
- } else {
- *((unsigned long *) &tmpaddr[0]) = fecp->fec_addr_low;
- *((unsigned short *) &tmpaddr[4]) = (fecp->fec_addr_high >> 16);
- iap = &tmpaddr[0];
- }
-
- memcpy(dev->dev_addr, iap, ETH_ALEN);
-
- /* Adjust MAC if using default MAC address */
- if (iap == fec_mac_default)
- dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index;
-}
-
-static void __inline__ fec_enable_phy_intr(void)
-{
-}
-
-static void __inline__ fec_disable_phy_intr(void)
-{
-}
-
-static void __inline__ fec_phy_ack_intr(void)
-{
-}
-
-static void __inline__ fec_localhw_setup(void)
-{
-}
-
-/*
- * Do not need to make region uncached on 5272.
- */
-static void __inline__ fec_uncache(unsigned long addr)
-{
-}
-
-/* ------------------------------------------------------------------------- */
-
-#elif defined(CONFIG_M520x)
-
-/*
- * Code specific to Coldfire 520x
- */
-static void __inline__ fec_request_intrs(struct net_device *dev)
-{
- struct fec_enet_private *fep;
- int b;
- static const struct idesc {
- char *name;
- unsigned short irq;
- } *idp, id[] = {
- { "fec(TXF)", 23 },
- { "fec(TXB)", 24 },
- { "fec(TXFIFO)", 25 },
- { "fec(TXCR)", 26 },
- { "fec(RXF)", 27 },
- { "fec(RXB)", 28 },
- { "fec(MII)", 29 },
- { "fec(LC)", 30 },
- { "fec(HBERR)", 31 },
- { "fec(GRA)", 32 },
- { "fec(EBERR)", 33 },
- { "fec(BABT)", 34 },
- { "fec(BABR)", 35 },
- { NULL },
- };
-
- fep = netdev_priv(dev);
- b = 64 + 13;
-
- /* Setup interrupt handlers. */
- for (idp = id; idp->name; idp++) {
- if (request_irq(b+idp->irq,fec_enet_interrupt,0,idp->name,dev)!=0)
- printk("FEC: Could not allocate %s IRQ(%d)!\n", idp->name, b+idp->irq);
- }
-
- /* Unmask interrupts at ColdFire interrupt controller */
- {
- volatile unsigned char *icrp;
- volatile unsigned long *imrp;
-
- icrp = (volatile unsigned char *) (MCF_IPSBAR + MCFICM_INTC0 +
- MCFINTC_ICR0);
- for (b = 36; (b < 49); b++)
- icrp[b] = 0x04;
- imrp = (volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 +
- MCFINTC_IMRH);
- *imrp &= ~0x0001FFF0;
- }
- *(volatile unsigned char *)(MCF_IPSBAR + MCF_GPIO_PAR_FEC) |= 0xf0;
- *(volatile unsigned char *)(MCF_IPSBAR + MCF_GPIO_PAR_FECI2C) |= 0x0f;
-}
-
-static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_private *fep)
-{
- volatile fec_t *fecp;
-
- fecp = fep->hwp;
- fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04;
- fecp->fec_x_cntrl = 0x00;
-
- /*
- * Set MII speed to 2.5 MHz
- * See 5282 manual section 17.5.4.7: MSCR
- */
- fep->phy_speed = ((((MCF_CLK / 2) / (2500000 / 10)) + 5) / 10) * 2;
- fecp->fec_mii_speed = fep->phy_speed;
-
- fec_restart(dev, 0);
-}
-
-static void __inline__ fec_get_mac(struct net_device *dev)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
- volatile fec_t *fecp;
- unsigned char *iap, tmpaddr[ETH_ALEN];
-
- fecp = fep->hwp;
-
- if (FEC_FLASHMAC) {
- /*
- * Get MAC address from FLASH.
- * If it is all 1's or 0's, use the default.
- */
- iap = FEC_FLASHMAC;
- if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) &&
- (iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0))
- iap = fec_mac_default;
- if ((iap[0] == 0xff) && (iap[1] == 0xff) && (iap[2] == 0xff) &&
- (iap[3] == 0xff) && (iap[4] == 0xff) && (iap[5] == 0xff))
- iap = fec_mac_default;
- } else {
- *((unsigned long *) &tmpaddr[0]) = fecp->fec_addr_low;
- *((unsigned short *) &tmpaddr[4]) = (fecp->fec_addr_high >> 16);
- iap = &tmpaddr[0];
- }
-
- memcpy(dev->dev_addr, iap, ETH_ALEN);
-
- /* Adjust MAC if using default MAC address */
- if (iap == fec_mac_default)
- dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index;
-}
-
-static void __inline__ fec_enable_phy_intr(void)
-{
-}
-
-static void __inline__ fec_disable_phy_intr(void)
-{
-}
-
-static void __inline__ fec_phy_ack_intr(void)
-{
-}
-
-static void __inline__ fec_localhw_setup(void)
-{
-}
-
-static void __inline__ fec_uncache(unsigned long addr)
-{
-}
-
-/* ------------------------------------------------------------------------- */
-
-#elif defined(CONFIG_M532x)
-/*
- * Code specific for M532x
- */
-static void __inline__ fec_request_intrs(struct net_device *dev)
-{
- struct fec_enet_private *fep;
- int b;
- static const struct idesc {
- char *name;
- unsigned short irq;
- } *idp, id[] = {
- { "fec(TXF)", 36 },
- { "fec(TXB)", 37 },
- { "fec(TXFIFO)", 38 },
- { "fec(TXCR)", 39 },
- { "fec(RXF)", 40 },
- { "fec(RXB)", 41 },
- { "fec(MII)", 42 },
- { "fec(LC)", 43 },
- { "fec(HBERR)", 44 },
- { "fec(GRA)", 45 },
- { "fec(EBERR)", 46 },
- { "fec(BABT)", 47 },
- { "fec(BABR)", 48 },
- { NULL },
- };
-
- fep = netdev_priv(dev);
- b = (fep->index) ? 128 : 64;
-
- /* Setup interrupt handlers. */
- for (idp = id; idp->name; idp++) {
- if (request_irq(b+idp->irq,fec_enet_interrupt,0,idp->name,dev)!=0)
- printk("FEC: Could not allocate %s IRQ(%d)!\n",
- idp->name, b+idp->irq);
- }
-
- /* Unmask interrupts */
- MCF_INTC0_ICR36 = 0x2;
- MCF_INTC0_ICR37 = 0x2;
- MCF_INTC0_ICR38 = 0x2;
- MCF_INTC0_ICR39 = 0x2;
- MCF_INTC0_ICR40 = 0x2;
- MCF_INTC0_ICR41 = 0x2;
- MCF_INTC0_ICR42 = 0x2;
- MCF_INTC0_ICR43 = 0x2;
- MCF_INTC0_ICR44 = 0x2;
- MCF_INTC0_ICR45 = 0x2;
- MCF_INTC0_ICR46 = 0x2;
- MCF_INTC0_ICR47 = 0x2;
- MCF_INTC0_ICR48 = 0x2;
-
- MCF_INTC0_IMRH &= ~(
- MCF_INTC_IMRH_INT_MASK36 |
- MCF_INTC_IMRH_INT_MASK37 |
- MCF_INTC_IMRH_INT_MASK38 |
- MCF_INTC_IMRH_INT_MASK39 |
- MCF_INTC_IMRH_INT_MASK40 |
- MCF_INTC_IMRH_INT_MASK41 |
- MCF_INTC_IMRH_INT_MASK42 |
- MCF_INTC_IMRH_INT_MASK43 |
- MCF_INTC_IMRH_INT_MASK44 |
- MCF_INTC_IMRH_INT_MASK45 |
- MCF_INTC_IMRH_INT_MASK46 |
- MCF_INTC_IMRH_INT_MASK47 |
- MCF_INTC_IMRH_INT_MASK48 );
-
- /* Set up gpio outputs for MII lines */
- MCF_GPIO_PAR_FECI2C |= (0 |
- MCF_GPIO_PAR_FECI2C_PAR_MDC_EMDC |
- MCF_GPIO_PAR_FECI2C_PAR_MDIO_EMDIO);
- MCF_GPIO_PAR_FEC = (0 |
- MCF_GPIO_PAR_FEC_PAR_FEC_7W_FEC |
- MCF_GPIO_PAR_FEC_PAR_FEC_MII_FEC);
-}
-
-static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_private *fep)
-{
- volatile fec_t *fecp;
-
- fecp = fep->hwp;
- fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04;
- fecp->fec_x_cntrl = 0x00;
-
- /*
- * Set MII speed to 2.5 MHz
- */
- fep->phy_speed = ((((MCF_CLK / 2) / (2500000 / 10)) + 5) / 10) * 2;
- fecp->fec_mii_speed = fep->phy_speed;
-
- fec_restart(dev, 0);
-}
-
-static void __inline__ fec_get_mac(struct net_device *dev)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
- volatile fec_t *fecp;
- unsigned char *iap, tmpaddr[ETH_ALEN];
-
- fecp = fep->hwp;
-
- if (FEC_FLASHMAC) {
- /*
- * Get MAC address from FLASH.
- * If it is all 1's or 0's, use the default.
- */
- iap = FEC_FLASHMAC;
+ iap = (unsigned char *)FEC_FLASHMAC;
if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) &&
(iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0))
iap = fec_mac_default;
/* Adjust MAC if using default MAC address */
if (iap == fec_mac_default)
- dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index;
-}
-
-static void __inline__ fec_enable_phy_intr(void)
-{
-}
-
-static void __inline__ fec_disable_phy_intr(void)
-{
-}
-
-static void __inline__ fec_phy_ack_intr(void)
-{
-}
-
-static void __inline__ fec_localhw_setup(void)
-{
-}
-
-/*
- * Do not need to make region uncached on 532x.
- */
-static void __inline__ fec_uncache(unsigned long addr)
-{
-}
-
-/* ------------------------------------------------------------------------- */
-
-
-#else
-
-/*
- * Code specific to the MPC860T setup.
- */
-static void __inline__ fec_request_intrs(struct net_device *dev)
-{
- volatile immap_t *immap;
-
- immap = (immap_t *)IMAP_ADDR; /* pointer to internal registers */
-
- if (request_8xxirq(FEC_INTERRUPT, fec_enet_interrupt, 0, "fec", dev) != 0)
- panic("Could not allocate FEC IRQ!");
-
-#ifdef CONFIG_RPXCLASSIC
- /* Make Port C, bit 15 an input that causes interrupts.
- */
- immap->im_ioport.iop_pcpar &= ~0x0001;
- immap->im_ioport.iop_pcdir &= ~0x0001;
- immap->im_ioport.iop_pcso &= ~0x0001;
- immap->im_ioport.iop_pcint |= 0x0001;
- cpm_install_handler(CPMVEC_PIO_PC15, mii_link_interrupt, dev);
-
- /* Make LEDS reflect Link status.
- */
- *((uint *) RPX_CSR_ADDR) &= ~BCSR2_FETHLEDMODE;
-#endif
-#ifdef CONFIG_FADS
- if (request_8xxirq(SIU_IRQ2, mii_link_interrupt, 0, "mii", dev) != 0)
- panic("Could not allocate MII IRQ!");
-#endif
-}
-
-static void __inline__ fec_get_mac(struct net_device *dev)
-{
- bd_t *bd;
-
- bd = (bd_t *)__res;
- memcpy(dev->dev_addr, bd->bi_enetaddr, ETH_ALEN);
-
-#ifdef CONFIG_RPXCLASSIC
- /* The Embedded Planet boards have only one MAC address in
- * the EEPROM, but can have two Ethernet ports. For the
- * FEC port, we create another address by setting one of
- * the address bits above something that would have (up to
- * now) been allocated.
- */
- dev->dev_adrd[3] |= 0x80;
-#endif
-}
-
-static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_private *fep)
-{
- extern uint _get_IMMR(void);
- volatile immap_t *immap;
- volatile fec_t *fecp;
-
- fecp = fep->hwp;
- immap = (immap_t *)IMAP_ADDR; /* pointer to internal registers */
-
- /* Configure all of port D for MII.
- */
- immap->im_ioport.iop_pdpar = 0x1fff;
-
- /* Bits moved from Rev. D onward.
- */
- if ((_get_IMMR() & 0xffff) < 0x0501)
- immap->im_ioport.iop_pddir = 0x1c58; /* Pre rev. D */
- else
- immap->im_ioport.iop_pddir = 0x1fff; /* Rev. D and later */
-
- /* Set MII speed to 2.5 MHz
- */
- fecp->fec_mii_speed = fep->phy_speed =
- ((bd->bi_busfreq * 1000000) / 2500000) & 0x7e;
-}
-
-static void __inline__ fec_enable_phy_intr(void)
-{
- volatile fec_t *fecp;
-
- fecp = fep->hwp;
-
- /* Enable MII command finished interrupt
- */
- fecp->fec_ivec = (FEC_INTERRUPT/2) << 29;
-}
-
-static void __inline__ fec_disable_phy_intr(void)
-{
-}
-
-static void __inline__ fec_phy_ack_intr(void)
-{
-}
-
-static void __inline__ fec_localhw_setup(void)
-{
- volatile fec_t *fecp;
-
- fecp = fep->hwp;
- fecp->fec_r_hash = PKT_MAXBUF_SIZE;
- /* Enable big endian and don't care about SDMA FC.
- */
- fecp->fec_fun_code = 0x78000000;
-}
-
-static void __inline__ fec_uncache(unsigned long addr)
-{
- pte_t *pte;
- pte = va_to_pte(mem_addr);
- pte_val(*pte) |= _PAGE_NO_CACHE;
- flush_tlb_page(init_mm.mmap, mem_addr);
+ dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index;
}
-
#endif
/* ------------------------------------------------------------------------- */
printk(".\n");
}
-static void mii_display_config(struct net_device *dev)
+static void mii_display_config(struct work_struct *work)
{
- struct fec_enet_private *fep = netdev_priv(dev);
+ struct fec_enet_private *fep = container_of(work, struct fec_enet_private, phy_task);
+ struct net_device *dev = fep->netdev;
uint status = fep->phy_status;
/*
if (status & PHY_CONF_LOOP)
printk(", loopback enabled");
-
+
printk(".\n");
fep->sequence_done = 1;
}
-static void mii_relink(struct net_device *dev)
+static void mii_relink(struct work_struct *work)
{
- struct fec_enet_private *fep = netdev_priv(dev);
+ struct fec_enet_private *fep = container_of(work, struct fec_enet_private, phy_task);
+ struct net_device *dev = fep->netdev;
int duplex;
/*
if (fep->link) {
duplex = 0;
- if (fep->phy_status
+ if (fep->phy_status
& (PHY_STAT_100FDX | PHY_STAT_10FDX))
duplex = 1;
fec_restart(dev, duplex);
- }
- else
+ } else
fec_stop(dev);
#if 0
return;
fep->mii_phy_task_queued = 1;
- INIT_WORK(&fep->phy_task, (void*)mii_relink, dev);
+ INIT_WORK(&fep->phy_task, mii_relink);
schedule_work(&fep->phy_task);
}
return;
fep->mii_phy_task_queued = 1;
- INIT_WORK(&fep->phy_task, (void*)mii_display_config, dev);
+ INIT_WORK(&fep->phy_task, mii_display_config);
schedule_work(&fep->phy_task);
}
printk(" -- %s\n", phy_info[i]->name);
else
printk(" -- unknown PHY!\n");
-
+
fep->phy = phy_info[i];
fep->phy_id_done = 1;
}
if (fep->phy_addr < 32) {
if ((phytype = (mii_reg & 0xffff)) != 0xffff && phytype != 0) {
-
+
/* Got first part of ID, now get remainder.
*/
fep->phy_id = phytype << 16;
mii_queue(dev, mk_mii_read(MII_REG_PHYIR2),
mii_discover_phy3);
- }
- else {
+ } else {
fep->phy_addr++;
mii_queue(dev, mk_mii_read(MII_REG_PHYIR1),
mii_discover_phy);
printk("FEC: No PHY device found.\n");
/* Disable external MII interface */
fecp->fec_mii_speed = fep->phy_speed = 0;
+#ifdef HAVE_mii_link_interrupt
fec_disable_phy_intr();
+#endif
}
}
/* This interrupt occurs when the PHY detects a link change.
*/
-#ifdef CONFIG_RPXCLASSIC
-static void
-mii_link_interrupt(void *dev_id)
-#else
+#ifdef HAVE_mii_link_interrupt
static irqreturn_t
-mii_link_interrupt(int irq, void * dev_id, struct pt_regs * regs)
-#endif
+mii_link_interrupt(int irq, void * dev_id)
{
struct net_device *dev = dev_id;
struct fec_enet_private *fep = netdev_priv(dev);
return IRQ_HANDLED;
}
+#endif
static int
fec_enet_open(struct net_device *dev)
return 0;
}
-static struct net_device_stats *fec_enet_get_stats(struct net_device *dev)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
-
- return &fep->stats;
-}
-
/* Set or clear the multicast filter for this adaptor.
* Skeleton taken from sunlance driver.
* The CPM Ethernet implementation allows Multicast as well as individual
ep = fep->hwp;
if (dev->flags&IFF_PROMISC) {
- /* Log any net taps. */
- printk("%s: Promiscuous mode enabled.\n", dev->name);
ep->fec_r_cntrl |= 0x0008;
} else {
/* Catch all multicast addresses, so set the
* filter to all 1's.
*/
- ep->fec_hash_table_high = 0xffffffff;
- ep->fec_hash_table_low = 0xffffffff;
+ ep->fec_grp_hash_table_high = 0xffffffff;
+ ep->fec_grp_hash_table_low = 0xffffffff;
} else {
/* Clear filter and add the addresses in hash register.
*/
- ep->fec_hash_table_high = 0;
- ep->fec_hash_table_low = 0;
-
+ ep->fec_grp_hash_table_high = 0;
+ ep->fec_grp_hash_table_low = 0;
+
dmi = dev->mc_list;
for (j = 0; j < dev->mc_count; j++, dmi = dmi->next)
*/
if (!(dmi->dmi_addr[0] & 1))
continue;
-
+
/* calculate crc32 value of mac address
*/
crc = 0xffffffff;
which point to specific bit in he hash registers
*/
hash = (crc >> (32 - HASH_BITS)) & 0x3f;
-
+
if (hash > 31)
- ep->fec_hash_table_high |= 1 << (hash - 32);
+ ep->fec_grp_hash_table_high |= 1 << (hash - 32);
else
- ep->fec_hash_table_low |= 1 << hash;
+ ep->fec_grp_hash_table_low |= 1 << hash;
}
}
}
}
-/* Initialize the FEC Ethernet on 860T (or ColdFire 5272).
- */
/*
* XXX: We need to clean up on failure exits here.
+ *
+ * index is only used in legacy code
*/
-int __init fec_enet_init(struct net_device *dev)
+int __init fec_enet_init(struct net_device *dev, int index)
{
struct fec_enet_private *fep = netdev_priv(dev);
unsigned long mem_addr;
cbd_t *cbd_base;
volatile fec_t *fecp;
int i, j;
- static int index = 0;
-
- /* Only allow us to be probed once. */
- if (index >= FEC_MAX_PORTS)
- return -ENXIO;
/* Allocate memory for buffer descriptors.
*/
- mem_addr = __get_free_page(GFP_KERNEL);
+ mem_addr = (unsigned long)dma_alloc_coherent(NULL, PAGE_SIZE,
+ &fep->bd_dma, GFP_KERNEL);
if (mem_addr == 0) {
printk("FEC: allocate descriptor memory failed?\n");
return -ENOMEM;
}
+ spin_lock_init(&fep->hw_lock);
+ spin_lock_init(&fep->mii_lock);
+
/* Create an Ethernet device instance.
*/
- fecp = (volatile fec_t *) fec_hw[index];
+ fecp = (volatile fec_t *)dev->base_addr;
fep->index = index;
fep->hwp = fecp;
+ fep->netdev = dev;
/* Whack a reset. We should wait for this.
*/
fecp->fec_ecntrl = 1;
udelay(10);
- /* Set the Ethernet address. If using multiple Enets on the 8xx,
- * this needs some work to get unique addresses.
- *
- * This is our default MAC address unless the user changes
- * it via eth_mac_addr (our dev->set_mac_addr handler).
- */
+ /* Set the Ethernet address */
+#ifdef CONFIG_M5272
fec_get_mac(dev);
+#else
+ {
+ unsigned long l;
+ l = fecp->fec_addr_low;
+ dev->dev_addr[0] = (unsigned char)((l & 0xFF000000) >> 24);
+ dev->dev_addr[1] = (unsigned char)((l & 0x00FF0000) >> 16);
+ dev->dev_addr[2] = (unsigned char)((l & 0x0000FF00) >> 8);
+ dev->dev_addr[3] = (unsigned char)((l & 0x000000FF) >> 0);
+ l = fecp->fec_addr_high;
+ dev->dev_addr[4] = (unsigned char)((l & 0xFF000000) >> 24);
+ dev->dev_addr[5] = (unsigned char)((l & 0x00FF0000) >> 16);
+ }
+#endif
cbd_base = (cbd_t *)mem_addr;
- /* XXX: missing check for allocation failure */
-
- fec_uncache(mem_addr);
/* Set receive and transmit descriptor base.
*/
mem_addr = __get_free_page(GFP_KERNEL);
/* XXX: missing check for allocation failure */
- fec_uncache(mem_addr);
-
/* Initialize the BD for every fragment in the page.
*/
for (j=0; j<FEC_ENET_RX_FRPPG; j++) {
/* Set receive and transmit descriptor base.
*/
- fecp->fec_r_des_start = __pa((uint)(fep->rx_bd_base));
- fecp->fec_x_des_start = __pa((uint)(fep->tx_bd_base));
+ fecp->fec_r_des_start = fep->bd_dma;
+ fecp->fec_x_des_start = (unsigned long)fep->bd_dma + sizeof(cbd_t)
+ * RX_RING_SIZE;
- /* Install our interrupt handlers. This varies depending on
- * the architecture.
- */
- fec_request_intrs(dev);
+#ifdef HAVE_mii_link_interrupt
+ fec_request_mii_intr(dev);
+#endif
- fecp->fec_hash_table_high = 0;
- fecp->fec_hash_table_low = 0;
+ fecp->fec_grp_hash_table_high = 0;
+ fecp->fec_grp_hash_table_low = 0;
fecp->fec_r_buff_size = PKT_MAXBLR_SIZE;
fecp->fec_ecntrl = 2;
fecp->fec_r_des_active = 0;
-
- dev->base_addr = (unsigned long)fecp;
+#ifndef CONFIG_M5272
+ fecp->fec_hash_table_high = 0;
+ fecp->fec_hash_table_low = 0;
+#endif
/* The FEC Ethernet specific entries in the device structure. */
dev->open = fec_enet_open;
dev->tx_timeout = fec_timeout;
dev->watchdog_timeo = TX_TIMEOUT;
dev->stop = fec_enet_close;
- dev->get_stats = fec_enet_get_stats;
dev->set_multicast_list = set_multicast_list;
for (i=0; i<NMII-1; i++)
mii_free = mii_cmds;
/* setup MII interface */
- fec_set_mii(dev, fep);
+ fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04;
+ fecp->fec_x_cntrl = 0x00;
+
+ /*
+ * Set MII speed to 2.5 MHz
+ */
+ fep->phy_speed = ((((clk_get_rate(fep->clk) / 2 + 4999999)
+ / 2500000) / 2) & 0x3F) << 1;
+ fecp->fec_mii_speed = fep->phy_speed;
+ fec_restart(dev, 0);
/* Clear and enable interrupts */
fecp->fec_ievent = 0xffc00000;
- fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_TXB |
- FEC_ENET_RXF | FEC_ENET_RXB | FEC_ENET_MII);
+ fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_RXF | FEC_ENET_MII);
/* Queue up command to detect the PHY and initialize the
* remainder of the interface.
fep->phy_addr = 0;
mii_queue(dev, mk_mii_read(MII_REG_PHYIR1), mii_discover_phy);
- index++;
return 0;
}
/* Clear any outstanding interrupt.
*/
fecp->fec_ievent = 0xffc00000;
- fec_enable_phy_intr();
/* Set station address.
*/
/* Reset all multicast.
*/
- fecp->fec_hash_table_high = 0;
- fecp->fec_hash_table_low = 0;
+ fecp->fec_grp_hash_table_high = 0;
+ fecp->fec_grp_hash_table_low = 0;
/* Set maximum receive buffer size.
*/
fecp->fec_r_buff_size = PKT_MAXBLR_SIZE;
- fec_localhw_setup();
-
/* Set receive and transmit descriptor base.
*/
- fecp->fec_r_des_start = __pa((uint)(fep->rx_bd_base));
- fecp->fec_x_des_start = __pa((uint)(fep->tx_bd_base));
+ fecp->fec_r_des_start = fep->bd_dma;
+ fecp->fec_x_des_start = (unsigned long)fep->bd_dma + sizeof(cbd_t)
+ * RX_RING_SIZE;
fep->dirty_tx = fep->cur_tx = fep->tx_bd_base;
fep->cur_rx = fep->rx_bd_base;
if (duplex) {
fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04;/* MII enable */
fecp->fec_x_cntrl = 0x04; /* FD enable */
- }
- else {
+ } else {
/* MII enable|No Rcv on Xmit */
fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x06;
fecp->fec_x_cntrl = 0x00;
/* Enable interrupts we wish to service.
*/
- fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_TXB |
- FEC_ENET_RXF | FEC_ENET_RXB | FEC_ENET_MII);
+ fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_RXF | FEC_ENET_MII);
}
static void
/* Clear outstanding MII command interrupts.
*/
fecp->fec_ievent = FEC_ENET_MII;
- fec_enable_phy_intr();
fecp->fec_imask = FEC_ENET_MII;
fecp->fec_mii_speed = fep->phy_speed;
}
-static int __init fec_enet_module_init(void)
+static int __devinit
+fec_probe(struct platform_device *pdev)
{
- struct net_device *dev;
- int i, j, err;
-
- printk("FEC ENET Version 0.2\n");
-
- for (i = 0; (i < FEC_MAX_PORTS); i++) {
- dev = alloc_etherdev(sizeof(struct fec_enet_private));
- if (!dev)
- return -ENOMEM;
- err = fec_enet_init(dev);
- if (err) {
- free_netdev(dev);
- continue;
+ struct fec_enet_private *fep;
+ struct net_device *ndev;
+ int i, irq, ret = 0;
+ struct resource *r;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r)
+ return -ENXIO;
+
+ r = request_mem_region(r->start, resource_size(r), pdev->name);
+ if (!r)
+ return -EBUSY;
+
+ /* Init network device */
+ ndev = alloc_etherdev(sizeof(struct fec_enet_private));
+ if (!ndev)
+ return -ENOMEM;
+
+ SET_NETDEV_DEV(ndev, &pdev->dev);
+
+ /* setup board info structure */
+ fep = netdev_priv(ndev);
+ memset(fep, 0, sizeof(*fep));
+
+ ndev->base_addr = (unsigned long)ioremap(r->start, resource_size(r));
+
+ if (!ndev->base_addr) {
+ ret = -ENOMEM;
+ goto failed_ioremap;
+ }
+
+ platform_set_drvdata(pdev, ndev);
+
+ /* This device has up to three irqs on some platforms */
+ for (i = 0; i < 3; i++) {
+ irq = platform_get_irq(pdev, i);
+ if (i && irq < 0)
+ break;
+ ret = request_irq(irq, fec_enet_interrupt, IRQF_DISABLED, pdev->name, ndev);
+ if (ret) {
+ while (i >= 0) {
+ irq = platform_get_irq(pdev, i);
+ free_irq(irq, ndev);
+ i--;
+ }
+ goto failed_irq;
}
- if (register_netdev(dev) != 0) {
- /* XXX: missing cleanup here */
- free_netdev(dev);
- return -EIO;
+ }
+
+ fep->clk = clk_get(&pdev->dev, "fec_clk");
+ if (IS_ERR(fep->clk)) {
+ ret = PTR_ERR(fep->clk);
+ goto failed_clk;
+ }
+ clk_enable(fep->clk);
+
+ ret = fec_enet_init(ndev, 0);
+ if (ret)
+ goto failed_init;
+
+ ret = register_netdev(ndev);
+ if (ret)
+ goto failed_register;
+
+ return 0;
+
+failed_register:
+failed_init:
+ clk_disable(fep->clk);
+ clk_put(fep->clk);
+failed_clk:
+ for (i = 0; i < 3; i++) {
+ irq = platform_get_irq(pdev, i);
+ if (irq > 0)
+ free_irq(irq, ndev);
+ }
+failed_irq:
+ iounmap((void __iomem *)ndev->base_addr);
+failed_ioremap:
+ free_netdev(ndev);
+
+ return ret;
+}
+
+static int __devexit
+fec_drv_remove(struct platform_device *pdev)
+{
+ struct net_device *ndev = platform_get_drvdata(pdev);
+ struct fec_enet_private *fep = netdev_priv(ndev);
+
+ platform_set_drvdata(pdev, NULL);
+
+ fec_stop(ndev);
+ clk_disable(fep->clk);
+ clk_put(fep->clk);
+ iounmap((void __iomem *)ndev->base_addr);
+ unregister_netdev(ndev);
+ free_netdev(ndev);
+ return 0;
+}
+
+static int
+fec_suspend(struct platform_device *dev, pm_message_t state)
+{
+ struct net_device *ndev = platform_get_drvdata(dev);
+ struct fec_enet_private *fep;
+
+ if (ndev) {
+ fep = netdev_priv(ndev);
+ if (netif_running(ndev)) {
+ netif_device_detach(ndev);
+ fec_stop(ndev);
}
+ }
+ return 0;
+}
+
+static int
+fec_resume(struct platform_device *dev)
+{
+ struct net_device *ndev = platform_get_drvdata(dev);
- printk("%s: ethernet ", dev->name);
- for (j = 0; (j < 5); j++)
- printk("%02x:", dev->dev_addr[j]);
- printk("%02x\n", dev->dev_addr[5]);
+ if (ndev) {
+ if (netif_running(ndev)) {
+ fec_enet_init(ndev, 0);
+ netif_device_attach(ndev);
+ }
}
return 0;
}
+static struct platform_driver fec_driver = {
+ .driver = {
+ .name = "fec",
+ .owner = THIS_MODULE,
+ },
+ .probe = fec_probe,
+ .remove = __devexit_p(fec_drv_remove),
+ .suspend = fec_suspend,
+ .resume = fec_resume,
+};
+
+static int __init
+fec_enet_module_init(void)
+{
+ printk(KERN_INFO "FEC Ethernet Driver\n");
+
+ return platform_driver_register(&fec_driver);
+}
+
+static void __exit
+fec_enet_cleanup(void)
+{
+ platform_driver_unregister(&fec_driver);
+}
+
+module_exit(fec_enet_cleanup);
module_init(fec_enet_module_init);
MODULE_LICENSE("GPL");