#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/pgtable.h>
+#include <asm/cacheflush.h>
#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || \
defined(CONFIG_M5272) || defined(CONFIG_M528x) || \
#define FEC_MAX_PORTS 1
#endif
+#if defined(CONFIG_FADS) || defined(CONFIG_RPXCLASSIC) || defined(CONFIG_M5272)
+#define HAVE_mii_link_interrupt
+#endif
+
/*
* Define the fixed address of the FEC hardware.
*/
#define FEC_FLASHMAC 0xf0006006
#elif defined(CONFIG_GILBARCONAP) || defined(CONFIG_SCALES)
#define FEC_FLASHMAC 0xf0006000
-#elif defined (CONFIG_MTD_KeyTechnology)
-#define FEC_FLASHMAC 0xffe04000
#elif defined(CONFIG_CANCam)
#define FEC_FLASHMAC 0xf0020000
#elif defined (CONFIG_M5272C3)
/* Hardware registers of the FEC device */
volatile fec_t *hwp;
+ struct net_device *netdev;
+
/* The saved address of a sent-in-place packet/buffer, for skfree(). */
unsigned char *tx_bounce[TX_RING_SIZE];
struct sk_buff* tx_skbuff[TX_RING_SIZE];
cbd_t *tx_bd_base;
cbd_t *cur_rx, *cur_tx; /* The next free ring entry */
cbd_t *dirty_tx; /* The ring entries to be free()ed. */
- struct net_device_stats stats;
uint tx_full;
- spinlock_t lock;
+ /* hold while accessing the HW like ringbuffer for tx/rx but not MAC */
+ spinlock_t hw_lock;
+ /* hold while accessing the mii_list_t() elements */
+ spinlock_t mii_lock;
uint phy_id;
uint phy_id_done;
static int fec_enet_open(struct net_device *dev);
static int fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev);
static void fec_enet_mii(struct net_device *dev);
-static irqreturn_t fec_enet_interrupt(int irq, void * dev_id, struct pt_regs * regs);
+static irqreturn_t fec_enet_interrupt(int irq, void * dev_id);
static void fec_enet_tx(struct net_device *dev);
static void fec_enet_rx(struct net_device *dev);
static int fec_enet_close(struct net_device *dev);
-static struct net_device_stats *fec_enet_get_stats(struct net_device *dev);
static void set_multicast_list(struct net_device *dev);
static void fec_restart(struct net_device *dev, int duplex);
static void fec_stop(struct net_device *dev);
static mii_list_t *mii_head;
static mii_list_t *mii_tail;
-static int mii_queue(struct net_device *dev, int request,
+static int mii_queue(struct net_device *dev, int request,
void (*func)(uint, struct net_device *));
/* Make MII read/write commands for the FEC.
#define MII_REG_SR 1 /* Status Register */
#define MII_REG_PHYIR1 2 /* PHY Identification Register 1 */
#define MII_REG_PHYIR2 3 /* PHY Identification Register 2 */
-#define MII_REG_ANAR 4 /* A-N Advertisement Register */
+#define MII_REG_ANAR 4 /* A-N Advertisement Register */
#define MII_REG_ANLPAR 5 /* A-N Link Partner Ability Register */
#define MII_REG_ANER 6 /* A-N Expansion Register */
#define MII_REG_ANNPTR 7 /* A-N Next Page Transmit Register */
#define PHY_CONF_LOOP 0x0002 /* 1 loopback mode enabled */
#define PHY_CONF_SPMASK 0x00f0 /* mask for speed */
#define PHY_CONF_10HDX 0x0010 /* 10 Mbit half duplex supported */
-#define PHY_CONF_10FDX 0x0020 /* 10 Mbit full duplex supported */
+#define PHY_CONF_10FDX 0x0020 /* 10 Mbit full duplex supported */
#define PHY_CONF_100HDX 0x0040 /* 100 Mbit half duplex supported */
-#define PHY_CONF_100FDX 0x0080 /* 100 Mbit full duplex supported */
+#define PHY_CONF_100FDX 0x0080 /* 100 Mbit full duplex supported */
#define PHY_STAT_LINK 0x0100 /* 1 up - 0 down */
#define PHY_STAT_FAULT 0x0200 /* 1 remote fault */
#define PHY_STAT_ANC 0x0400 /* 1 auto-negotiation complete */
#define PHY_STAT_SPMASK 0xf000 /* mask for speed */
#define PHY_STAT_10HDX 0x1000 /* 10 Mbit half duplex selected */
-#define PHY_STAT_10FDX 0x2000 /* 10 Mbit full duplex selected */
+#define PHY_STAT_10FDX 0x2000 /* 10 Mbit full duplex selected */
#define PHY_STAT_100HDX 0x4000 /* 100 Mbit half duplex selected */
-#define PHY_STAT_100FDX 0x8000 /* 100 Mbit full duplex selected */
+#define PHY_STAT_100FDX 0x8000 /* 100 Mbit full duplex selected */
static int
volatile fec_t *fecp;
volatile cbd_t *bdp;
unsigned short status;
+ unsigned long flags;
fep = netdev_priv(dev);
fecp = (volatile fec_t*)dev->base_addr;
return 1;
}
+ spin_lock_irqsave(&fep->hw_lock, flags);
/* Fill in a Tx ring entry */
bdp = fep->cur_tx;
* This should not happen, since dev->tbusy should be set.
*/
printk("%s: tx queue full!.\n", dev->name);
+ spin_unlock_irqrestore(&fep->hw_lock, flags);
return 1;
}
#endif
*/
fep->tx_skbuff[fep->skb_cur] = skb;
- fep->stats.tx_bytes += skb->len;
+ dev->stats.tx_bytes += skb->len;
fep->skb_cur = (fep->skb_cur+1) & TX_RING_MOD_MASK;
-
+
/* Push the data cache so the CPM does not get stale memory
* data.
*/
flush_dcache_range((unsigned long)skb->data,
(unsigned long)skb->data + skb->len);
- spin_lock_irq(&fep->lock);
-
/* Send it on its way. Tell FEC it's ready, interrupt when done,
* it's the last BD of the frame, and to put the CRC on the end.
*/
fep->cur_tx = (cbd_t *)bdp;
- spin_unlock_irq(&fep->lock);
+ spin_unlock_irqrestore(&fep->hw_lock, flags);
return 0;
}
struct fec_enet_private *fep = netdev_priv(dev);
printk("%s: transmit timed out.\n", dev->name);
- fep->stats.tx_errors++;
+ dev->stats.tx_errors++;
#ifndef final_version
{
int i;
bdp = fep->tx_bd_base;
printk(" tx: %u buffers\n", TX_RING_SIZE);
for (i = 0 ; i < TX_RING_SIZE; i++) {
- printk(" %08x: %04x %04x %08x\n",
+ printk(" %08x: %04x %04x %08x\n",
(uint) bdp,
bdp->cbd_sc,
bdp->cbd_datlen,
* This is called from the MPC core interrupt.
*/
static irqreturn_t
-fec_enet_interrupt(int irq, void * dev_id, struct pt_regs * regs)
+fec_enet_interrupt(int irq, void * dev_id)
{
struct net_device *dev = dev_id;
volatile fec_t *fecp;
uint int_events;
- int handled = 0;
+ irqreturn_t ret = IRQ_NONE;
fecp = (volatile fec_t*)dev->base_addr;
/* Get the interrupt events that caused us to be here.
*/
- while ((int_events = fecp->fec_ievent) != 0) {
+ do {
+ int_events = fecp->fec_ievent;
fecp->fec_ievent = int_events;
/* Handle receive event in its own function.
*/
if (int_events & FEC_ENET_RXF) {
- handled = 1;
+ ret = IRQ_HANDLED;
fec_enet_rx(dev);
}
them as part of the transmit process.
*/
if (int_events & FEC_ENET_TXF) {
- handled = 1;
+ ret = IRQ_HANDLED;
fec_enet_tx(dev);
}
if (int_events & FEC_ENET_MII) {
- handled = 1;
+ ret = IRQ_HANDLED;
fec_enet_mii(dev);
}
-
- }
- return IRQ_RETVAL(handled);
+
+ } while (int_events);
+
+ return ret;
}
struct sk_buff *skb;
fep = netdev_priv(dev);
- spin_lock(&fep->lock);
+ spin_lock_irq(&fep->hw_lock);
bdp = fep->dirty_tx;
while (((status = bdp->cbd_sc) & BD_ENET_TX_READY) == 0) {
if (status & (BD_ENET_TX_HB | BD_ENET_TX_LC |
BD_ENET_TX_RL | BD_ENET_TX_UN |
BD_ENET_TX_CSL)) {
- fep->stats.tx_errors++;
+ dev->stats.tx_errors++;
if (status & BD_ENET_TX_HB) /* No heartbeat */
- fep->stats.tx_heartbeat_errors++;
+ dev->stats.tx_heartbeat_errors++;
if (status & BD_ENET_TX_LC) /* Late collision */
- fep->stats.tx_window_errors++;
+ dev->stats.tx_window_errors++;
if (status & BD_ENET_TX_RL) /* Retrans limit */
- fep->stats.tx_aborted_errors++;
+ dev->stats.tx_aborted_errors++;
if (status & BD_ENET_TX_UN) /* Underrun */
- fep->stats.tx_fifo_errors++;
+ dev->stats.tx_fifo_errors++;
if (status & BD_ENET_TX_CSL) /* Carrier lost */
- fep->stats.tx_carrier_errors++;
+ dev->stats.tx_carrier_errors++;
} else {
- fep->stats.tx_packets++;
+ dev->stats.tx_packets++;
}
#ifndef final_version
* but we eventually sent the packet OK.
*/
if (status & BD_ENET_TX_DEF)
- fep->stats.collisions++;
-
+ dev->stats.collisions++;
+
/* Free the sk buffer associated with this last transmit.
*/
dev_kfree_skb_any(skb);
fep->tx_skbuff[fep->skb_dirty] = NULL;
fep->skb_dirty = (fep->skb_dirty + 1) & TX_RING_MOD_MASK;
-
+
/* Update pointer to next buffer descriptor to be transmitted.
*/
if (status & BD_ENET_TX_WRAP)
bdp = fep->tx_bd_base;
else
bdp++;
-
+
/* Since we have freed up a buffer, the ring is no longer
* full.
*/
}
}
fep->dirty_tx = (cbd_t *)bdp;
- spin_unlock(&fep->lock);
+ spin_unlock_irq(&fep->hw_lock);
}
struct sk_buff *skb;
ushort pkt_len;
__u8 *data;
-
+
#ifdef CONFIG_M532x
flush_cache_all();
-#endif
+#endif
fep = netdev_priv(dev);
fecp = (volatile fec_t*)dev->base_addr;
+ spin_lock_irq(&fep->hw_lock);
+
/* First, grab all of the stats for the incoming packet.
* These get messed up if we get called due to a busy condition.
*/
/* Check for errors. */
if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_NO |
BD_ENET_RX_CR | BD_ENET_RX_OV)) {
- fep->stats.rx_errors++;
+ dev->stats.rx_errors++;
if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH)) {
/* Frame too long or too short. */
- fep->stats.rx_length_errors++;
+ dev->stats.rx_length_errors++;
}
if (status & BD_ENET_RX_NO) /* Frame alignment */
- fep->stats.rx_frame_errors++;
+ dev->stats.rx_frame_errors++;
if (status & BD_ENET_RX_CR) /* CRC Error */
- fep->stats.rx_crc_errors++;
+ dev->stats.rx_crc_errors++;
if (status & BD_ENET_RX_OV) /* FIFO overrun */
- fep->stats.rx_fifo_errors++;
+ dev->stats.rx_fifo_errors++;
}
/* Report late collisions as a frame error.
* have in the buffer. So, just drop this frame on the floor.
*/
if (status & BD_ENET_RX_CL) {
- fep->stats.rx_errors++;
- fep->stats.rx_frame_errors++;
+ dev->stats.rx_errors++;
+ dev->stats.rx_frame_errors++;
goto rx_processing_done;
}
/* Process the incoming frame.
*/
- fep->stats.rx_packets++;
+ dev->stats.rx_packets++;
pkt_len = bdp->cbd_datlen;
- fep->stats.rx_bytes += pkt_len;
+ dev->stats.rx_bytes += pkt_len;
data = (__u8*)__va(bdp->cbd_bufaddr);
/* This does 16 byte alignment, exactly what we need.
if (skb == NULL) {
printk("%s: Memory squeeze, dropping packet.\n", dev->name);
- fep->stats.rx_dropped++;
+ dev->stats.rx_dropped++;
} else {
- skb->dev = dev;
skb_put(skb,pkt_len-4); /* Make room */
- eth_copy_and_sum(skb, data, pkt_len-4, 0);
+ skb_copy_to_linear_data(skb, data, pkt_len-4);
skb->protocol=eth_type_trans(skb,dev);
netif_rx(skb);
}
bdp = fep->rx_bd_base;
else
bdp++;
-
+
#if 1
/* Doing this here will keep the FEC running while we process
* incoming frames. On a heavily loaded network, we should be
*/
fecp->fec_r_des_active = 0;
#endif
+
+ spin_unlock_irq(&fep->hw_lock);
}
uint mii_reg;
fep = netdev_priv(dev);
+ spin_lock_irq(&fep->mii_lock);
+
ep = fep->hwp;
mii_reg = ep->fec_mii_data;
- spin_lock(&fep->lock);
-
if ((mip = mii_head) == NULL) {
printk("MII and no head!\n");
goto unlock;
ep->fec_mii_data = mip->mii_regval;
unlock:
- spin_unlock(&fep->lock);
+ spin_unlock_irq(&fep->mii_lock);
}
static int
/* Add PHY address to register command.
*/
fep = netdev_priv(dev);
- regval |= fep->phy_addr << 23;
+ spin_lock_irqsave(&fep->mii_lock, flags);
+ regval |= fep->phy_addr << 23;
retval = 0;
- spin_lock_irqsave(&fep->lock,flags);
-
if ((mip = mii_free) != NULL) {
mii_free = mip->mii_next;
mip->mii_regval = regval;
if (mii_head) {
mii_tail->mii_next = mip;
mii_tail = mip;
- }
- else {
+ } else {
mii_head = mii_tail = mip;
fep->hwp->fec_mii_data = regval;
}
- }
- else {
+ } else {
retval = 1;
}
- spin_unlock_irqrestore(&fep->lock,flags);
-
- return(retval);
+ spin_unlock_irqrestore(&fep->mii_lock, flags);
+ return retval;
}
static void mii_do_cmd(struct net_device *dev, const phy_cmd_t *c)
{
- int k;
-
if(!c)
return;
- for(k = 0; (c+k)->mii_data != mk_mii_end; k++) {
- mii_queue(dev, (c+k)->mii_data, (c+k)->funct);
- }
+ for (; c->mii_data != mk_mii_end; c++)
+ mii_queue(dev, c->mii_data, c->funct);
}
static void mii_parse_sr(uint mii_reg, struct net_device *dev)
status |= PHY_STAT_FAULT;
if (mii_reg & 0x0020)
status |= PHY_STAT_ANC;
-
*s = status;
}
{ mk_mii_end, }
};
static phy_info_t const phy_info_lxt970 = {
- .id = 0x07810000,
+ .id = 0x07810000,
.name = "LXT970",
.config = phy_cmd_lxt970_config,
.startup = phy_cmd_lxt970_startup,
.ack_int = phy_cmd_lxt970_ack_int,
.shutdown = phy_cmd_lxt970_shutdown
};
-
+
/* ------------------------------------------------------------------------- */
/* The Level one LXT971 is used on some of my custom boards */
#define MII_LXT971_LCR 20 /* LED Control Register */
#define MII_LXT971_TCR 30 /* Transmit Control Register */
-/*
+/*
* I had some nice ideas of running the MDIO faster...
* The 971 should support 8MHz and I tried it, but things acted really
* weird, so 2.5 MHz ought to be enough for anyone...
*s = status;
}
-
+
static phy_cmd_t const phy_cmd_lxt971_config[] = {
- /* limit to 10MBit because my prototype board
+ /* limit to 10MBit because my prototype board
* doesn't work with 100. */
{ mk_mii_read(MII_REG_CR), mii_parse_cr },
{ mk_mii_read(MII_REG_ANAR), mii_parse_anar },
/* Somehow does the 971 tell me that the link is down
* the first read after power-up.
* read here to get a valid value in ack_int */
- { mk_mii_read(MII_REG_SR), mii_parse_sr },
+ { mk_mii_read(MII_REG_SR), mii_parse_sr },
{ mk_mii_end, }
};
static phy_cmd_t const phy_cmd_lxt971_ack_int[] = {
{ mk_mii_end, }
};
static phy_info_t const phy_info_lxt971 = {
- .id = 0x0001378e,
+ .id = 0x0001378e,
.name = "LXT971",
.config = phy_cmd_lxt971_config,
.startup = phy_cmd_lxt971_startup,
}
static phy_cmd_t const phy_cmd_qs6612_config[] = {
- /* The PHY powers up isolated on the RPX,
+ /* The PHY powers up isolated on the RPX,
* so send a command to allow operation.
*/
{ mk_mii_write(MII_QS6612_PCR, 0x0dc0), NULL },
{ mk_mii_end, }
};
static phy_info_t const phy_info_qs6612 = {
- .id = 0x00181440,
+ .id = 0x00181440,
.name = "QS6612",
.config = phy_cmd_qs6612_config,
.startup = phy_cmd_qs6612_startup,
static phy_cmd_t const phy_cmd_am79c874_startup[] = { /* enable interrupts */
{ mk_mii_write(MII_AM79C874_ICSR, 0xff00), NULL },
{ mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
- { mk_mii_read(MII_REG_SR), mii_parse_sr },
+ { mk_mii_read(MII_REG_SR), mii_parse_sr },
{ mk_mii_end, }
};
static phy_cmd_t const phy_cmd_am79c874_ack_int[] = {
static phy_cmd_t const phy_cmd_ks8721bl_startup[] = { /* enable interrupts */
{ mk_mii_write(MII_KS8721BL_ICSR, 0xff00), NULL },
{ mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
- { mk_mii_read(MII_REG_SR), mii_parse_sr },
+ { mk_mii_read(MII_REG_SR), mii_parse_sr },
{ mk_mii_end, }
};
static phy_cmd_t const phy_cmd_ks8721bl_ack_int[] = {
{ mk_mii_end, }
};
static phy_info_t const phy_info_ks8721bl = {
- .id = 0x00022161,
+ .id = 0x00022161,
.name = "KS8721BL",
.config = phy_cmd_ks8721bl_config,
.startup = phy_cmd_ks8721bl_startup,
};
/* ------------------------------------------------------------------------- */
-#if !defined(CONFIG_M532x)
+#ifdef HAVE_mii_link_interrupt
#ifdef CONFIG_RPXCLASSIC
static void
mii_link_interrupt(void *dev_id);
#else
static irqreturn_t
-mii_link_interrupt(int irq, void * dev_id, struct pt_regs * regs);
+mii_link_interrupt(int irq, void * dev_id);
#endif
#endif
#if defined(CONFIG_M5272)
-
/*
* Code specific to Coldfire 5272 setup.
*/
static const struct idesc {
char *name;
unsigned short irq;
- irqreturn_t (*handler)(int, void *, struct pt_regs *);
+ irq_handler_t handler;
} *idp, id[] = {
{ "fec(RX)", 86, fec_enet_interrupt },
{ "fec(TX)", 87, fec_enet_interrupt },
/* Setup interrupt handlers. */
for (idp = id; idp->name; idp++) {
- if (request_irq(idp->irq, idp->handler, 0, idp->name, dev) != 0)
+ if (request_irq(idp->irq, idp->handler, IRQF_DISABLED, idp->name, dev) != 0)
printk("FEC: Could not allocate %s IRQ(%d)!\n", idp->name, idp->irq);
}
icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR3);
*icrp = 0x00000ddd;
icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
- *icrp = (*icrp & 0x70777777) | 0x0d000000;
+ *icrp = 0x0d000000;
}
static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_private *fep)
{
volatile unsigned long *icrp;
icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
- *icrp = (*icrp & 0x70777777) | 0x08000000;
+ *icrp = 0x08000000;
}
static void __inline__ fec_phy_ack_intr(void)
volatile unsigned long *icrp;
/* Acknowledge the interrupt */
icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
- *icrp = (*icrp & 0x77777777) | 0x08000000;
+ *icrp = 0x0d000000;
}
static void __inline__ fec_localhw_setup(void)
unsigned short irq;
} *idp, id[] = {
{ "fec(TXF)", 23 },
- { "fec(TXB)", 24 },
- { "fec(TXFIFO)", 25 },
- { "fec(TXCR)", 26 },
{ "fec(RXF)", 27 },
- { "fec(RXB)", 28 },
{ "fec(MII)", 29 },
- { "fec(LC)", 30 },
- { "fec(HBERR)", 31 },
- { "fec(GRA)", 32 },
- { "fec(EBERR)", 33 },
- { "fec(BABT)", 34 },
- { "fec(BABR)", 35 },
{ NULL },
};
/* Setup interrupt handlers. */
for (idp = id; idp->name; idp++) {
- if (request_irq(b+idp->irq, fec_enet_interrupt, 0, idp->name, dev) != 0)
+ if (request_irq(b+idp->irq, fec_enet_interrupt, IRQF_DISABLED, idp->name, dev) != 0)
printk("FEC: Could not allocate %s IRQ(%d)!\n", idp->name, b+idp->irq);
}
{
volatile u16 *gpio_paspar;
volatile u8 *gpio_pehlpar;
-
+
gpio_paspar = (volatile u16 *) (MCF_IPSBAR + 0x100056);
gpio_pehlpar = (volatile u16 *) (MCF_IPSBAR + 0x100058);
*gpio_paspar |= 0x0f00;
*gpio_pehlpar = 0xc0;
}
#endif
+
+#if defined(CONFIG_M527x)
+ /* Set up gpio outputs for MII lines */
+ {
+ volatile u8 *gpio_par_fec;
+ volatile u16 *gpio_par_feci2c;
+
+ gpio_par_feci2c = (volatile u16 *)(MCF_IPSBAR + 0x100082);
+ /* Set up gpio outputs for FEC0 MII lines */
+ gpio_par_fec = (volatile u8 *)(MCF_IPSBAR + 0x100078);
+
+ *gpio_par_feci2c |= 0x0f00;
+ *gpio_par_fec |= 0xc0;
+
+#if defined(CONFIG_FEC2)
+ /* Set up gpio outputs for FEC1 MII lines */
+ gpio_par_fec = (volatile u8 *)(MCF_IPSBAR + 0x100079);
+
+ *gpio_par_feci2c |= 0x00a0;
+ *gpio_par_fec |= 0xc0;
+#endif /* CONFIG_FEC2 */
+ }
+#endif /* CONFIG_M527x */
}
static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_private *fep)
unsigned short irq;
} *idp, id[] = {
{ "fec(TXF)", 23 },
- { "fec(TXB)", 24 },
- { "fec(TXFIFO)", 25 },
- { "fec(TXCR)", 26 },
{ "fec(RXF)", 27 },
- { "fec(RXB)", 28 },
{ "fec(MII)", 29 },
- { "fec(LC)", 30 },
- { "fec(HBERR)", 31 },
- { "fec(GRA)", 32 },
- { "fec(EBERR)", 33 },
- { "fec(BABT)", 34 },
- { "fec(BABR)", 35 },
{ NULL },
};
/* Setup interrupt handlers. */
for (idp = id; idp->name; idp++) {
- if (request_irq(b+idp->irq,fec_enet_interrupt,0,idp->name,dev)!=0)
+ if (request_irq(b+idp->irq, fec_enet_interrupt, IRQF_DISABLED, idp->name,dev) != 0)
printk("FEC: Could not allocate %s IRQ(%d)!\n", idp->name, b+idp->irq);
}
unsigned short irq;
} *idp, id[] = {
{ "fec(TXF)", 36 },
- { "fec(TXB)", 37 },
- { "fec(TXFIFO)", 38 },
- { "fec(TXCR)", 39 },
{ "fec(RXF)", 40 },
- { "fec(RXB)", 41 },
{ "fec(MII)", 42 },
- { "fec(LC)", 43 },
- { "fec(HBERR)", 44 },
- { "fec(GRA)", 45 },
- { "fec(EBERR)", 46 },
- { "fec(BABT)", 47 },
- { "fec(BABR)", 48 },
{ NULL },
};
/* Setup interrupt handlers. */
for (idp = id; idp->name; idp++) {
- if (request_irq(b+idp->irq,fec_enet_interrupt,0,idp->name,dev)!=0)
- printk("FEC: Could not allocate %s IRQ(%d)!\n",
+ if (request_irq(b+idp->irq, fec_enet_interrupt, IRQF_DISABLED, idp->name,dev) != 0)
+ printk("FEC: Could not allocate %s IRQ(%d)!\n",
idp->name, b+idp->irq);
}
immap->im_ioport.iop_pddir = 0x1c58; /* Pre rev. D */
else
immap->im_ioport.iop_pddir = 0x1fff; /* Rev. D and later */
-
+
/* Set MII speed to 2.5 MHz
*/
- fecp->fec_mii_speed = fep->phy_speed =
+ fecp->fec_mii_speed = fep->phy_speed =
((bd->bi_busfreq * 1000000) / 2500000) & 0x7e;
}
fecp = fep->hwp;
- /* Enable MII command finished interrupt
+ /* Enable MII command finished interrupt
*/
fecp->fec_ivec = (FEC_INTERRUPT/2) << 29;
}
printk(".\n");
}
-static void mii_display_config(struct net_device *dev)
+static void mii_display_config(struct work_struct *work)
{
- struct fec_enet_private *fep = netdev_priv(dev);
+ struct fec_enet_private *fep = container_of(work, struct fec_enet_private, phy_task);
+ struct net_device *dev = fep->netdev;
uint status = fep->phy_status;
/*
if (status & PHY_CONF_LOOP)
printk(", loopback enabled");
-
+
printk(".\n");
fep->sequence_done = 1;
}
-static void mii_relink(struct net_device *dev)
+static void mii_relink(struct work_struct *work)
{
- struct fec_enet_private *fep = netdev_priv(dev);
+ struct fec_enet_private *fep = container_of(work, struct fec_enet_private, phy_task);
+ struct net_device *dev = fep->netdev;
int duplex;
/*
if (fep->link) {
duplex = 0;
- if (fep->phy_status
+ if (fep->phy_status
& (PHY_STAT_100FDX | PHY_STAT_10FDX))
duplex = 1;
fec_restart(dev, duplex);
- }
- else
+ } else
fec_stop(dev);
#if 0
return;
fep->mii_phy_task_queued = 1;
- INIT_WORK(&fep->phy_task, (void*)mii_relink, dev);
+ INIT_WORK(&fep->phy_task, mii_relink);
schedule_work(&fep->phy_task);
}
return;
fep->mii_phy_task_queued = 1;
- INIT_WORK(&fep->phy_task, (void*)mii_display_config, dev);
+ INIT_WORK(&fep->phy_task, mii_display_config);
schedule_work(&fep->phy_task);
}
printk(" -- %s\n", phy_info[i]->name);
else
printk(" -- unknown PHY!\n");
-
+
fep->phy = phy_info[i];
fep->phy_id_done = 1;
}
if (fep->phy_addr < 32) {
if ((phytype = (mii_reg & 0xffff)) != 0xffff && phytype != 0) {
-
+
/* Got first part of ID, now get remainder.
*/
fep->phy_id = phytype << 16;
mii_queue(dev, mk_mii_read(MII_REG_PHYIR2),
mii_discover_phy3);
- }
- else {
+ } else {
fep->phy_addr++;
mii_queue(dev, mk_mii_read(MII_REG_PHYIR1),
mii_discover_phy);
/* This interrupt occurs when the PHY detects a link change.
*/
+#ifdef HAVE_mii_link_interrupt
#ifdef CONFIG_RPXCLASSIC
static void
mii_link_interrupt(void *dev_id)
#else
static irqreturn_t
-mii_link_interrupt(int irq, void * dev_id, struct pt_regs * regs)
+mii_link_interrupt(int irq, void * dev_id)
#endif
{
struct net_device *dev = dev_id;
return IRQ_HANDLED;
}
+#endif
static int
fec_enet_open(struct net_device *dev)
return 0;
}
-static struct net_device_stats *fec_enet_get_stats(struct net_device *dev)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
-
- return &fep->stats;
-}
-
/* Set or clear the multicast filter for this adaptor.
* Skeleton taken from sunlance driver.
* The CPM Ethernet implementation allows Multicast as well as individual
/* Catch all multicast addresses, so set the
* filter to all 1's.
*/
- ep->fec_hash_table_high = 0xffffffff;
- ep->fec_hash_table_low = 0xffffffff;
+ ep->fec_grp_hash_table_high = 0xffffffff;
+ ep->fec_grp_hash_table_low = 0xffffffff;
} else {
/* Clear filter and add the addresses in hash register.
*/
- ep->fec_hash_table_high = 0;
- ep->fec_hash_table_low = 0;
-
+ ep->fec_grp_hash_table_high = 0;
+ ep->fec_grp_hash_table_low = 0;
+
dmi = dev->mc_list;
for (j = 0; j < dev->mc_count; j++, dmi = dmi->next)
*/
if (!(dmi->dmi_addr[0] & 1))
continue;
-
+
/* calculate crc32 value of mac address
*/
crc = 0xffffffff;
which point to specific bit in he hash registers
*/
hash = (crc >> (32 - HASH_BITS)) & 0x3f;
-
+
if (hash > 31)
- ep->fec_hash_table_high |= 1 << (hash - 32);
+ ep->fec_grp_hash_table_high |= 1 << (hash - 32);
else
- ep->fec_hash_table_low |= 1 << hash;
+ ep->fec_grp_hash_table_low |= 1 << hash;
}
}
}
return -ENOMEM;
}
+ spin_lock_init(&fep->hw_lock);
+ spin_lock_init(&fep->mii_lock);
+
/* Create an Ethernet device instance.
*/
fecp = (volatile fec_t *) fec_hw[index];
fep->index = index;
fep->hwp = fecp;
+ fep->netdev = dev;
/* Whack a reset. We should wait for this.
*/
*/
fec_request_intrs(dev);
- fecp->fec_hash_table_high = 0;
- fecp->fec_hash_table_low = 0;
+ fecp->fec_grp_hash_table_high = 0;
+ fecp->fec_grp_hash_table_low = 0;
fecp->fec_r_buff_size = PKT_MAXBLR_SIZE;
fecp->fec_ecntrl = 2;
fecp->fec_r_des_active = 0;
+#ifndef CONFIG_M5272
+ fecp->fec_hash_table_high = 0;
+ fecp->fec_hash_table_low = 0;
+#endif
dev->base_addr = (unsigned long)fecp;
dev->tx_timeout = fec_timeout;
dev->watchdog_timeo = TX_TIMEOUT;
dev->stop = fec_enet_close;
- dev->get_stats = fec_enet_get_stats;
dev->set_multicast_list = set_multicast_list;
for (i=0; i<NMII-1; i++)
/* Clear and enable interrupts */
fecp->fec_ievent = 0xffc00000;
- fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_TXB |
- FEC_ENET_RXF | FEC_ENET_RXB | FEC_ENET_MII);
+ fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_RXF | FEC_ENET_MII);
/* Queue up command to detect the PHY and initialize the
* remainder of the interface.
/* Reset all multicast.
*/
- fecp->fec_hash_table_high = 0;
- fecp->fec_hash_table_low = 0;
+ fecp->fec_grp_hash_table_high = 0;
+ fecp->fec_grp_hash_table_low = 0;
/* Set maximum receive buffer size.
*/
if (duplex) {
fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04;/* MII enable */
fecp->fec_x_cntrl = 0x04; /* FD enable */
- }
- else {
+ } else {
/* MII enable|No Rcv on Xmit */
fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x06;
fecp->fec_x_cntrl = 0x00;
/* Enable interrupts we wish to service.
*/
- fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_TXB |
- FEC_ENET_RXF | FEC_ENET_RXB | FEC_ENET_MII);
+ fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_RXF | FEC_ENET_MII);
}
static void
static int __init fec_enet_module_init(void)
{
struct net_device *dev;
- int i, j, err;
+ int i, err;
+ DECLARE_MAC_BUF(mac);
printk("FEC ENET Version 0.2\n");
return -EIO;
}
- printk("%s: ethernet ", dev->name);
- for (j = 0; (j < 5); j++)
- printk("%02x:", dev->dev_addr[j]);
- printk("%02x\n", dev->dev_addr[5]);
+ printk("%s: ethernet %s\n",
+ dev->name, print_mac(mac, dev->dev_addr));
}
return 0;
}