/*******************************************************************************
Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2008 Intel Corporation.
+ Copyright(c) 1999 - 2009 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw);
static s32 e1000_setup_link_82571(struct e1000_hw *hw);
static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw);
+static void e1000_clear_vfta_82571(struct e1000_hw *hw);
static bool e1000_check_mng_mode_82574(struct e1000_hw *hw);
static s32 e1000_led_on_82574(struct e1000_hw *hw);
static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw);
+static void e1000_power_down_phy_copper_82571(struct e1000_hw *hw);
/**
* e1000_init_phy_params_82571 - Init PHY func ptrs.
* @hw: pointer to the HW structure
- *
- * This is a function pointer entry point called by the api module.
**/
static s32 e1000_init_phy_params_82571(struct e1000_hw *hw)
{
phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
phy->reset_delay_us = 100;
+ phy->ops.power_up = e1000_power_up_phy_copper;
+ phy->ops.power_down = e1000_power_down_phy_copper_82571;
+
switch (hw->mac.type) {
case e1000_82571:
case e1000_82572:
/**
* e1000_init_nvm_params_82571 - Init NVM func ptrs.
* @hw: pointer to the HW structure
- *
- * This is a function pointer entry point called by the api module.
**/
static s32 e1000_init_nvm_params_82571(struct e1000_hw *hw)
{
/**
* e1000_init_mac_params_82571 - Init MAC func ptrs.
* @hw: pointer to the HW structure
- *
- * This is a function pointer entry point called by the api module.
**/
static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter)
{
mac->mta_reg_count = 128;
/* Set rar entry count */
mac->rar_entry_count = E1000_RAR_ENTRIES;
- /* Set if manageability features are enabled. */
- mac->arc_subsystem_valid = (er32(FWSM) & E1000_FWSM_MODE_MASK) ? 1 : 0;
+ /* Adaptive IFS supported */
+ mac->adaptive_ifs = true;
/* check for link */
switch (hw->phy.media_type) {
}
switch (hw->mac.type) {
+ case e1000_82573:
+ func->set_lan_id = e1000_set_lan_id_single_port;
+ func->check_mng_mode = e1000e_check_mng_mode_generic;
+ func->led_on = e1000e_led_on_generic;
+
+ /* FWSM register */
+ mac->has_fwsm = true;
+ /*
+ * ARC supported; valid only if manageability features are
+ * enabled.
+ */
+ mac->arc_subsystem_valid =
+ (er32(FWSM) & E1000_FWSM_MODE_MASK)
+ ? true : false;
+ break;
case e1000_82574:
case e1000_82583:
+ func->set_lan_id = e1000_set_lan_id_single_port;
func->check_mng_mode = e1000_check_mng_mode_82574;
func->led_on = e1000_led_on_82574;
break;
default:
func->check_mng_mode = e1000e_check_mng_mode_generic;
func->led_on = e1000e_led_on_generic;
+
+ /* FWSM register */
+ mac->has_fwsm = true;
break;
}
* indicates that the bootagent or EFI code has
* improperly left this bit enabled
*/
- hw_dbg(hw, "Please update your 82571 Bootagent\n");
+ e_dbg("Please update your 82571 Bootagent\n");
}
ew32(SWSM, swsm & ~E1000_SWSM_SMBI);
}
/*
- * Initialze device specific counter of SMBI acquisition
+ * Initialize device specific counter of SMBI acquisition
* timeouts.
*/
hw->dev_spec.e82571.smb_counter = 0;
struct e1000_hw *hw = &adapter->hw;
static int global_quad_port_a; /* global port a indication */
struct pci_dev *pdev = adapter->pdev;
- u16 eeprom_data = 0;
int is_port_b = er32(STATUS) & E1000_STATUS_FUNC_1;
s32 rc;
if (pdev->device == E1000_DEV_ID_82571EB_SERDES_QUAD)
adapter->flags &= ~FLAG_HAS_WOL;
break;
-
case e1000_82573:
+ case e1000_82574:
+ case e1000_82583:
+ /* Disable ASPM L0s due to hardware errata */
+ e1000e_disable_aspm(adapter->pdev, PCIE_LINK_STATE_L0S);
+
if (pdev->device == E1000_DEV_ID_82573L) {
- if (e1000_read_nvm(&adapter->hw, NVM_INIT_3GIO_3, 1,
- &eeprom_data) < 0)
- break;
- if (!(eeprom_data & NVM_WORD1A_ASPM_MASK)) {
- adapter->flags |= FLAG_HAS_JUMBO_FRAMES;
- adapter->max_hw_frame_size = DEFAULT_JUMBO;
- }
+ adapter->flags |= FLAG_HAS_JUMBO_FRAMES;
+ adapter->max_hw_frame_size = DEFAULT_JUMBO;
}
break;
default:
}
if (i == sw_timeout) {
- hw_dbg(hw, "Driver can't access device - SMBI bit is set.\n");
+ e_dbg("Driver can't access device - SMBI bit is set.\n");
hw->dev_spec.e82571.smb_counter++;
}
/* Get the FW semaphore. */
if (i == fw_timeout) {
/* Release semaphores */
e1000_put_hw_semaphore_82571(hw);
- hw_dbg(hw, "Driver can't access the NVM\n");
+ e_dbg("Driver can't access the NVM\n");
return -E1000_ERR_NVM;
}
u16 words, u16 *data)
{
struct e1000_nvm_info *nvm = &hw->nvm;
- u32 i;
- u32 eewr = 0;
+ u32 i, eewr = 0;
s32 ret_val = 0;
/*
*/
if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
(words == 0)) {
- hw_dbg(hw, "nvm parameter(s) out of bounds\n");
+ e_dbg("nvm parameter(s) out of bounds\n");
return -E1000_ERR_NVM;
}
timeout--;
}
if (!timeout) {
- hw_dbg(hw, "MNG configuration cycle has not completed.\n");
+ e_dbg("MNG configuration cycle has not completed.\n");
return -E1000_ERR_RESET;
}
/**
* e1000_set_d0_lplu_state_82571 - Set Low Power Linkup D0 state
* @hw: pointer to the HW structure
- * @active: TRUE to enable LPLU, FALSE to disable
+ * @active: true to enable LPLU, false to disable
*
* Sets the LPLU D0 state according to the active flag. When activating LPLU
* this function also disables smart speed and vice versa. LPLU will not be
* e1000_reset_hw_82571 - Reset hardware
* @hw: pointer to the HW structure
*
- * This resets the hardware into a known state. This is a
- * function pointer entry point called by the api module.
+ * This resets the hardware into a known state.
**/
static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
{
- u32 ctrl;
- u32 extcnf_ctrl;
- u32 ctrl_ext;
- u32 icr;
+ u32 ctrl, extcnf_ctrl, ctrl_ext, icr;
s32 ret_val;
u16 i = 0;
*/
ret_val = e1000e_disable_pcie_master(hw);
if (ret_val)
- hw_dbg(hw, "PCI-E Master disable polling has failed.\n");
+ e_dbg("PCI-E Master disable polling has failed.\n");
- hw_dbg(hw, "Masking off all interrupts\n");
+ e_dbg("Masking off all interrupts\n");
ew32(IMC, 0xffffffff);
ew32(RCTL, 0);
ctrl = er32(CTRL);
- hw_dbg(hw, "Issuing a global reset to MAC\n");
+ e_dbg("Issuing a global reset to MAC\n");
ew32(CTRL, ctrl | E1000_CTRL_RST);
if (hw->nvm.type == e1000_nvm_flash_hw) {
ew32(IMC, 0xffffffff);
icr = er32(ICR);
- if (hw->mac.type == e1000_82571 &&
- hw->dev_spec.e82571.alt_mac_addr_is_present)
- e1000e_set_laa_state_82571(hw, true);
+ /* Install any alternate MAC address into RAR0 */
+ ret_val = e1000_check_alt_mac_addr_generic(hw);
+ if (ret_val)
+ return ret_val;
+
+ e1000e_set_laa_state_82571(hw, true);
/* Reinitialize the 82571 serdes link state machine */
if (hw->phy.media_type == e1000_media_type_internal_serdes)
struct e1000_mac_info *mac = &hw->mac;
u32 reg_data;
s32 ret_val;
- u16 i;
- u16 rar_count = mac->rar_entry_count;
+ u16 i, rar_count = mac->rar_entry_count;
e1000_initialize_hw_bits_82571(hw);
/* Initialize identification LED */
ret_val = e1000e_id_led_init(hw);
- if (ret_val) {
- hw_dbg(hw, "Error initializing identification LED\n");
- return ret_val;
- }
+ if (ret_val)
+ e_dbg("Error initializing identification LED\n");
+ /* This is not fatal and we should not stop init due to this */
/* Disabling VLAN filtering */
- hw_dbg(hw, "Initializing the IEEE VLAN\n");
- e1000e_clear_vfta(hw);
+ e_dbg("Initializing the IEEE VLAN\n");
+ mac->ops.clear_vfta(hw);
/* Setup the receive address. */
/*
e1000e_init_rx_addrs(hw, rar_count);
/* Zero out the Multicast HASH table */
- hw_dbg(hw, "Zeroing the MTA\n");
+ e_dbg("Zeroing the MTA\n");
for (i = 0; i < mac->mta_reg_count; i++)
E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
/* ...for both queues. */
switch (mac->type) {
case e1000_82573:
+ e1000e_enable_tx_pkt_filtering(hw);
+ /* fall through */
case e1000_82574:
case e1000_82583:
- e1000e_enable_tx_pkt_filtering(hw);
reg_data = er32(GCR);
reg_data |= E1000_GCR_L1_ACT_WITHOUT_L0S_RX;
ew32(GCR, reg_data);
reg |= (1 << 22);
ew32(GCR, reg);
+ /*
+ * Workaround for hardware errata.
+ * apply workaround for hardware errata documented in errata
+ * docs Fixes issue where some error prone or unreliable PCIe
+ * completions are occurring, particularly with ASPM enabled.
+ * Without fix, issue can cause tx timeouts.
+ */
reg = er32(GCR2);
reg |= 1;
ew32(GCR2, reg);
default:
break;
}
-
- return;
}
/**
- * e1000e_clear_vfta - Clear VLAN filter table
+ * e1000_clear_vfta_82571 - Clear VLAN filter table
* @hw: pointer to the HW structure
*
* Clears the register array which contains the VLAN filter table by
* setting all the values to 0.
**/
-void e1000e_clear_vfta(struct e1000_hw *hw)
+static void e1000_clear_vfta_82571(struct e1000_hw *hw)
{
u32 offset;
u32 vfta_value = 0;
}
/**
- * e1000_update_mc_addr_list_82571 - Update Multicast addresses
- * @hw: pointer to the HW structure
- * @mc_addr_list: array of multicast addresses to program
- * @mc_addr_count: number of multicast addresses to program
- * @rar_used_count: the first RAR register free to program
- * @rar_count: total number of supported Receive Address Registers
- *
- * Updates the Receive Address Registers and Multicast Table Array.
- * The caller must have a packed mc_addr_list of multicast addresses.
- * The parameter rar_count will usually be hw->mac.rar_entry_count
- * unless there are workarounds that change this.
- **/
-static void e1000_update_mc_addr_list_82571(struct e1000_hw *hw,
- u8 *mc_addr_list,
- u32 mc_addr_count,
- u32 rar_used_count,
- u32 rar_count)
-{
- if (e1000e_get_laa_state_82571(hw))
- rar_count--;
-
- e1000e_update_mc_addr_list_generic(hw, mc_addr_list, mc_addr_count,
- rar_used_count, rar_count);
-}
-
-/**
* e1000_setup_link_82571 - Setup flow control and link settings
* @hw: pointer to the HW structure
*
static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw)
{
u32 ctrl;
- u32 led_ctrl;
s32 ret_val;
ctrl = er32(CTRL);
break;
case e1000_phy_igp_2:
ret_val = e1000e_copper_link_setup_igp(hw);
- /* Setup activity LED */
- led_ctrl = er32(LEDCTL);
- led_ctrl &= IGP_ACTIVITY_LED_MASK;
- led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
- ew32(LEDCTL, led_ctrl);
break;
default:
return -E1000_ERR_PHY;
* e1000_check_for_serdes_link_82571 - Check for link (Serdes)
* @hw: pointer to the HW structure
*
- * Checks for link up on the hardware. If link is not up and we have
- * a signal, then we need to force link up.
+ * Reports the link state as up or down.
+ *
+ * If autonegotiation is supported by the link partner, the link state is
+ * determined by the result of autonegotiation. This is the most likely case.
+ * If autonegotiation is not supported by the link partner, and the link
+ * has a valid signal, force the link up.
+ *
+ * The link state is represented internally here by 4 states:
+ *
+ * 1) down
+ * 2) autoneg_progress
+ * 3) autoneg_complete (the link successfully autonegotiated)
+ * 4) forced_up (the link has been forced up, it did not autonegotiate)
+ *
**/
static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
{
*/
mac->serdes_link_state =
e1000_serdes_link_autoneg_progress;
- hw_dbg(hw, "AN_UP -> AN_PROG\n");
+ mac->serdes_has_link = false;
+ e_dbg("AN_UP -> AN_PROG\n");
}
break;
if (rxcw & E1000_RXCW_C) {
/* Enable autoneg, and unforce link up */
ew32(TXCW, mac->txcw);
- ew32(CTRL,
- (ctrl & ~E1000_CTRL_SLU));
+ ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
mac->serdes_link_state =
e1000_serdes_link_autoneg_progress;
- hw_dbg(hw, "FORCED_UP -> AN_PROG\n");
+ mac->serdes_has_link = false;
+ e_dbg("FORCED_UP -> AN_PROG\n");
}
break;
case e1000_serdes_link_autoneg_progress:
- /*
- * If the LU bit is set in the STATUS register,
- * autoneg has completed sucessfully. If not,
- * try foring the link because the far end may be
- * available but not capable of autonegotiation.
- */
- if (status & E1000_STATUS_LU) {
- mac->serdes_link_state =
- e1000_serdes_link_autoneg_complete;
- hw_dbg(hw, "AN_PROG -> AN_UP\n");
+ if (rxcw & E1000_RXCW_C) {
+ /*
+ * We received /C/ ordered sets, meaning the
+ * link partner has autonegotiated, and we can
+ * trust the Link Up (LU) status bit.
+ */
+ if (status & E1000_STATUS_LU) {
+ mac->serdes_link_state =
+ e1000_serdes_link_autoneg_complete;
+ e_dbg("AN_PROG -> AN_UP\n");
+ mac->serdes_has_link = true;
+ } else {
+ /* Autoneg completed, but failed. */
+ mac->serdes_link_state =
+ e1000_serdes_link_down;
+ e_dbg("AN_PROG -> DOWN\n");
+ }
} else {
/*
- * Disable autoneg, force link up and
- * full duplex, and change state to forced
+ * The link partner did not autoneg.
+ * Force link up and full duplex, and change
+ * state to forced.
*/
- ew32(TXCW,
- (mac->txcw & ~E1000_TXCW_ANE));
+ ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE));
ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD);
ew32(CTRL, ctrl);
/* Configure Flow Control after link up. */
- ret_val =
- e1000e_config_fc_after_link_up(hw);
+ ret_val = e1000e_config_fc_after_link_up(hw);
if (ret_val) {
- hw_dbg(hw, "Error config flow control\n");
+ e_dbg("Error config flow control\n");
break;
}
mac->serdes_link_state =
e1000_serdes_link_forced_up;
- hw_dbg(hw, "AN_PROG -> FORCED_UP\n");
+ mac->serdes_has_link = true;
+ e_dbg("AN_PROG -> FORCED_UP\n");
}
- mac->serdes_has_link = true;
break;
case e1000_serdes_link_down:
default:
- /* The link was down but the receiver has now gained
+ /*
+ * The link was down but the receiver has now gained
* valid sync, so lets see if we can bring the link
- * up. */
+ * up.
+ */
ew32(TXCW, mac->txcw);
- ew32(CTRL,
- (ctrl & ~E1000_CTRL_SLU));
+ ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
mac->serdes_link_state =
e1000_serdes_link_autoneg_progress;
- hw_dbg(hw, "DOWN -> AN_PROG\n");
+ e_dbg("DOWN -> AN_PROG\n");
break;
}
} else {
if (!(rxcw & E1000_RXCW_SYNCH)) {
mac->serdes_has_link = false;
mac->serdes_link_state = e1000_serdes_link_down;
- hw_dbg(hw, "ANYSTATE -> DOWN\n");
+ e_dbg("ANYSTATE -> DOWN\n");
} else {
/*
- * We have sync, and can tolerate one
- * invalid (IV) codeword before declaring
- * link down, so reread to look again
+ * We have sync, and can tolerate one invalid (IV)
+ * codeword before declaring link down, so reread
+ * to look again.
*/
udelay(10);
rxcw = er32(RXCW);
if (rxcw & E1000_RXCW_IV) {
mac->serdes_link_state = e1000_serdes_link_down;
mac->serdes_has_link = false;
- hw_dbg(hw, "ANYSTATE -> DOWN\n");
+ e_dbg("ANYSTATE -> DOWN\n");
}
}
}
ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data);
if (ret_val) {
- hw_dbg(hw, "NVM Read Error\n");
+ e_dbg("NVM Read Error\n");
return ret_val;
}
bool e1000e_get_laa_state_82571(struct e1000_hw *hw)
{
if (hw->mac.type != e1000_82571)
- return 0;
+ return false;
return hw->dev_spec.e82571.laa_is_present;
}
* @hw: pointer to the HW structure
* @state: enable/disable locally administered address
*
- * Enable/Disable the current locally administers address state.
+ * Enable/Disable the current locally administered address state.
**/
void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state)
{
}
/**
+ * e1000_read_mac_addr_82571 - Read device MAC address
+ * @hw: pointer to the HW structure
+ **/
+static s32 e1000_read_mac_addr_82571(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+
+ /*
+ * If there's an alternate MAC address place it in RAR0
+ * so that it will override the Si installed default perm
+ * address.
+ */
+ ret_val = e1000_check_alt_mac_addr_generic(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = e1000_read_mac_addr_generic(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_power_down_phy_copper_82571 - Remove link during PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, or wake on lan is not enabled, remove the link.
+ **/
+static void e1000_power_down_phy_copper_82571(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ struct e1000_mac_info *mac = &hw->mac;
+
+ if (!(phy->ops.check_reset_block))
+ return;
+
+ /* If the management interface is not enabled, then power down */
+ if (!(mac->ops.check_mng_mode(hw) || phy->ops.check_reset_block(hw)))
+ e1000_power_down_phy_copper(hw);
+}
+
+/**
* e1000_clear_hw_cntrs_82571 - Clear device specific hardware counters
* @hw: pointer to the HW structure
*
**/
static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw)
{
- u32 temp;
-
e1000e_clear_hw_cntrs_base(hw);
- temp = er32(PRC64);
- temp = er32(PRC127);
- temp = er32(PRC255);
- temp = er32(PRC511);
- temp = er32(PRC1023);
- temp = er32(PRC1522);
- temp = er32(PTC64);
- temp = er32(PTC127);
- temp = er32(PTC255);
- temp = er32(PTC511);
- temp = er32(PTC1023);
- temp = er32(PTC1522);
-
- temp = er32(ALGNERRC);
- temp = er32(RXERRC);
- temp = er32(TNCRS);
- temp = er32(CEXTERR);
- temp = er32(TSCTC);
- temp = er32(TSCTFC);
-
- temp = er32(MGTPRC);
- temp = er32(MGTPDC);
- temp = er32(MGTPTC);
-
- temp = er32(IAC);
- temp = er32(ICRXOC);
-
- temp = er32(ICRXPTC);
- temp = er32(ICRXATC);
- temp = er32(ICTXPTC);
- temp = er32(ICTXATC);
- temp = er32(ICTXQEC);
- temp = er32(ICTXQMTC);
- temp = er32(ICRXDMTC);
+ er32(PRC64);
+ er32(PRC127);
+ er32(PRC255);
+ er32(PRC511);
+ er32(PRC1023);
+ er32(PRC1522);
+ er32(PTC64);
+ er32(PTC127);
+ er32(PTC255);
+ er32(PTC511);
+ er32(PTC1023);
+ er32(PTC1522);
+
+ er32(ALGNERRC);
+ er32(RXERRC);
+ er32(TNCRS);
+ er32(CEXTERR);
+ er32(TSCTC);
+ er32(TSCTFC);
+
+ er32(MGTPRC);
+ er32(MGTPDC);
+ er32(MGTPTC);
+
+ er32(IAC);
+ er32(ICRXOC);
+
+ er32(ICRXPTC);
+ er32(ICRXATC);
+ er32(ICTXPTC);
+ er32(ICTXATC);
+ er32(ICTXQEC);
+ er32(ICTXQMTC);
+ er32(ICRXDMTC);
}
static struct e1000_mac_operations e82571_mac_ops = {
.cleanup_led = e1000e_cleanup_led_generic,
.clear_hw_cntrs = e1000_clear_hw_cntrs_82571,
.get_bus_info = e1000e_get_bus_info_pcie,
+ .set_lan_id = e1000_set_lan_id_multi_port_pcie,
/* .get_link_up_info: media type dependent */
/* .led_on: mac type dependent */
.led_off = e1000e_led_off_generic,
- .update_mc_addr_list = e1000_update_mc_addr_list_82571,
+ .update_mc_addr_list = e1000e_update_mc_addr_list_generic,
+ .write_vfta = e1000_write_vfta_generic,
+ .clear_vfta = e1000_clear_vfta_82571,
.reset_hw = e1000_reset_hw_82571,
.init_hw = e1000_init_hw_82571,
.setup_link = e1000_setup_link_82571,
/* .setup_physical_interface: media type dependent */
.setup_led = e1000e_setup_led_generic,
+ .read_mac_addr = e1000_read_mac_addr_82571,
};
static struct e1000_phy_operations e82_phy_ops_igp = {
- .acquire_phy = e1000_get_hw_semaphore_82571,
+ .acquire = e1000_get_hw_semaphore_82571,
+ .check_polarity = e1000_check_polarity_igp,
.check_reset_block = e1000e_check_reset_block_generic,
- .commit_phy = NULL,
+ .commit = NULL,
.force_speed_duplex = e1000e_phy_force_speed_duplex_igp,
.get_cfg_done = e1000_get_cfg_done_82571,
.get_cable_length = e1000e_get_cable_length_igp_2,
- .get_phy_info = e1000e_get_phy_info_igp,
- .read_phy_reg = e1000e_read_phy_reg_igp,
- .release_phy = e1000_put_hw_semaphore_82571,
- .reset_phy = e1000e_phy_hw_reset_generic,
+ .get_info = e1000e_get_phy_info_igp,
+ .read_reg = e1000e_read_phy_reg_igp,
+ .release = e1000_put_hw_semaphore_82571,
+ .reset = e1000e_phy_hw_reset_generic,
.set_d0_lplu_state = e1000_set_d0_lplu_state_82571,
.set_d3_lplu_state = e1000e_set_d3_lplu_state,
- .write_phy_reg = e1000e_write_phy_reg_igp,
+ .write_reg = e1000e_write_phy_reg_igp,
.cfg_on_link_up = NULL,
};
static struct e1000_phy_operations e82_phy_ops_m88 = {
- .acquire_phy = e1000_get_hw_semaphore_82571,
+ .acquire = e1000_get_hw_semaphore_82571,
+ .check_polarity = e1000_check_polarity_m88,
.check_reset_block = e1000e_check_reset_block_generic,
- .commit_phy = e1000e_phy_sw_reset,
+ .commit = e1000e_phy_sw_reset,
.force_speed_duplex = e1000e_phy_force_speed_duplex_m88,
.get_cfg_done = e1000e_get_cfg_done,
.get_cable_length = e1000e_get_cable_length_m88,
- .get_phy_info = e1000e_get_phy_info_m88,
- .read_phy_reg = e1000e_read_phy_reg_m88,
- .release_phy = e1000_put_hw_semaphore_82571,
- .reset_phy = e1000e_phy_hw_reset_generic,
+ .get_info = e1000e_get_phy_info_m88,
+ .read_reg = e1000e_read_phy_reg_m88,
+ .release = e1000_put_hw_semaphore_82571,
+ .reset = e1000e_phy_hw_reset_generic,
.set_d0_lplu_state = e1000_set_d0_lplu_state_82571,
.set_d3_lplu_state = e1000e_set_d3_lplu_state,
- .write_phy_reg = e1000e_write_phy_reg_m88,
+ .write_reg = e1000e_write_phy_reg_m88,
.cfg_on_link_up = NULL,
};
static struct e1000_phy_operations e82_phy_ops_bm = {
- .acquire_phy = e1000_get_hw_semaphore_82571,
+ .acquire = e1000_get_hw_semaphore_82571,
+ .check_polarity = e1000_check_polarity_m88,
.check_reset_block = e1000e_check_reset_block_generic,
- .commit_phy = e1000e_phy_sw_reset,
+ .commit = e1000e_phy_sw_reset,
.force_speed_duplex = e1000e_phy_force_speed_duplex_m88,
.get_cfg_done = e1000e_get_cfg_done,
.get_cable_length = e1000e_get_cable_length_m88,
- .get_phy_info = e1000e_get_phy_info_m88,
- .read_phy_reg = e1000e_read_phy_reg_bm2,
- .release_phy = e1000_put_hw_semaphore_82571,
- .reset_phy = e1000e_phy_hw_reset_generic,
+ .get_info = e1000e_get_phy_info_m88,
+ .read_reg = e1000e_read_phy_reg_bm2,
+ .release = e1000_put_hw_semaphore_82571,
+ .reset = e1000e_phy_hw_reset_generic,
.set_d0_lplu_state = e1000_set_d0_lplu_state_82571,
.set_d3_lplu_state = e1000e_set_d3_lplu_state,
- .write_phy_reg = e1000e_write_phy_reg_bm2,
+ .write_reg = e1000e_write_phy_reg_bm2,
.cfg_on_link_up = NULL,
};
static struct e1000_nvm_operations e82571_nvm_ops = {
- .acquire_nvm = e1000_acquire_nvm_82571,
- .read_nvm = e1000e_read_nvm_eerd,
- .release_nvm = e1000_release_nvm_82571,
- .update_nvm = e1000_update_nvm_checksum_82571,
+ .acquire = e1000_acquire_nvm_82571,
+ .read = e1000e_read_nvm_eerd,
+ .release = e1000_release_nvm_82571,
+ .update = e1000_update_nvm_checksum_82571,
.valid_led_default = e1000_valid_led_default_82571,
- .validate_nvm = e1000_validate_nvm_checksum_82571,
- .write_nvm = e1000_write_nvm_82571,
+ .validate = e1000_validate_nvm_checksum_82571,
+ .write = e1000_write_nvm_82571,
};
struct e1000_info e1000_82571_info = {
| FLAG_RESET_OVERWRITES_LAA /* errata */
| FLAG_TARC_SPEED_MODE_BIT /* errata */
| FLAG_APME_CHECK_PORT_B,
+ .flags2 = FLAG2_DISABLE_ASPM_L1, /* errata 13 */
.pba = 38,
.max_hw_frame_size = DEFAULT_JUMBO,
.get_variants = e1000_get_variants_82571,
| FLAG_RX_CSUM_ENABLED
| FLAG_HAS_CTRLEXT_ON_LOAD
| FLAG_TARC_SPEED_MODE_BIT, /* errata */
+ .flags2 = FLAG2_DISABLE_ASPM_L1, /* errata 13 */
.pba = 38,
.max_hw_frame_size = DEFAULT_JUMBO,
.get_variants = e1000_get_variants_82571,
struct e1000_info e1000_82573_info = {
.mac = e1000_82573,
.flags = FLAG_HAS_HW_VLAN_FILTER
- | FLAG_HAS_JUMBO_FRAMES
| FLAG_HAS_WOL
| FLAG_APME_IN_CTRL3
| FLAG_RX_CSUM_ENABLED
| FLAG_HAS_SMART_POWER_DOWN
| FLAG_HAS_AMT
- | FLAG_HAS_ERT
| FLAG_HAS_SWSM_ON_LOAD,
.pba = 20,
.max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN,
| FLAG_HAS_SMART_POWER_DOWN
| FLAG_HAS_AMT
| FLAG_HAS_CTRLEXT_ON_LOAD,
- .pba = 20,
+ .pba = 36,
.max_hw_frame_size = DEFAULT_JUMBO,
.get_variants = e1000_get_variants_82571,
.mac_ops = &e82571_mac_ops,
| FLAG_HAS_SMART_POWER_DOWN
| FLAG_HAS_AMT
| FLAG_HAS_CTRLEXT_ON_LOAD,
- .pba = 20,
+ .pba = 36,
.max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN,
.get_variants = e1000_get_variants_82571,
.mac_ops = &e82571_mac_ops,
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff