/*******************************************************************************
- Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+ Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved.
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the Free
Contact Information:
Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*******************************************************************************/
*/
#define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET }
+/* Module Parameters are always initialized to -1, so that the driver
+ * can tell the difference between no user specified value or the
+ * user asking for the default value.
+ * The true default values are loaded in when e1000_check_options is called.
+ *
+ * This is a GCC extension to ANSI C.
+ * See the item "Labeled Elements in Initializers" in the section
+ * "Extensions to the C Language Family" of the GCC documentation.
+ */
+
#define E1000_PARAM(X, desc) \
static int __devinitdata X[E1000_MAX_NIC+1] = E1000_PARAM_INIT; \
static int num_##X = 0; \
*
* Valid Range: 100-100000 (0=off, 1=dynamic)
*
- * Default Value: 1
+ * Default Value: 8000
*/
E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");
+/* Enable Smart Power Down of the PHY
+ *
+ * Valid Range: 0, 1
+ *
+ * Default Value: 0 (disabled)
+ */
+
+E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down");
+
+/* Enable Kumeran Lock Loss workaround
+ *
+ * Valid Range: 0, 1
+ *
+ * Default Value: 1 (enabled)
+ */
+
+E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround");
+
#define AUTONEG_ADV_DEFAULT 0x2F
#define AUTONEG_ADV_MASK 0x2F
#define FLOW_CONTROL_DEFAULT FLOW_CONTROL_FULL
e1000_validate_option(int *value, struct e1000_option *opt,
struct e1000_adapter *adapter)
{
- if(*value == OPTION_UNSET) {
+ if (*value == OPTION_UNSET) {
*value = opt->def;
return 0;
}
}
break;
case range_option:
- if(*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
+ if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
DPRINTK(PROBE, INFO,
"%s set to %i\n", opt->name, *value);
return 0;
int i;
struct e1000_opt_list *ent;
- for(i = 0; i < opt->arg.l.nr; i++) {
+ for (i = 0; i < opt->arg.l.nr; i++) {
ent = &opt->arg.l.p[i];
- if(*value == ent->i) {
- if(ent->str[0] != '\0')
+ if (*value == ent->i) {
+ if (ent->str[0] != '\0')
DPRINTK(PROBE, INFO, "%s\n", ent->str);
return 0;
}
BUG();
}
- DPRINTK(PROBE, INFO, "Invalid %s specified (%i) %s\n",
+ DPRINTK(PROBE, INFO, "Invalid %s value specified (%i) %s\n",
opt->name, *value, opt->err);
*value = opt->def;
return -1;
e1000_check_options(struct e1000_adapter *adapter)
{
int bd = adapter->bd_number;
- if(bd >= E1000_MAX_NIC) {
+ if (bd >= E1000_MAX_NIC) {
DPRINTK(PROBE, NOTICE,
"Warning: no configuration for board #%i\n", bd);
DPRINTK(PROBE, NOTICE, "Using defaults for all values\n");
if (num_TxDescriptors > bd) {
tx_ring->count = TxDescriptors[bd];
e1000_validate_option(&tx_ring->count, &opt, adapter);
- E1000_ROUNDUP(tx_ring->count,
+ E1000_ROUNDUP(tx_ring->count,
REQ_TX_DESCRIPTOR_MULTIPLE);
} else {
tx_ring->count = opt.def;
}
- for (i = 0; i < adapter->num_queues; i++)
+ for (i = 0; i < adapter->num_tx_queues; i++)
tx_ring[i].count = tx_ring->count;
}
{ /* Receive Descriptor Count */
if (num_RxDescriptors > bd) {
rx_ring->count = RxDescriptors[bd];
e1000_validate_option(&rx_ring->count, &opt, adapter);
- E1000_ROUNDUP(rx_ring->count,
+ E1000_ROUNDUP(rx_ring->count,
REQ_RX_DESCRIPTOR_MULTIPLE);
} else {
rx_ring->count = opt.def;
}
- for (i = 0; i < adapter->num_queues; i++)
+ for (i = 0; i < adapter->num_rx_queues; i++)
rx_ring[i].count = rx_ring->count;
}
{ /* Checksum Offload Enable/Disable */
e1000_validate_option(&fc, &opt, adapter);
adapter->hw.fc = adapter->hw.original_fc = fc;
} else {
- adapter->hw.fc = opt.def;
+ adapter->hw.fc = adapter->hw.original_fc = opt.def;
}
}
{ /* Transmit Interrupt Delay */
if (num_TxIntDelay > bd) {
adapter->tx_int_delay = TxIntDelay[bd];
- e1000_validate_option(&adapter->tx_int_delay, &opt,
- adapter);
+ e1000_validate_option(&adapter->tx_int_delay, &opt,
+ adapter);
} else {
adapter->tx_int_delay = opt.def;
}
if (num_TxAbsIntDelay > bd) {
adapter->tx_abs_int_delay = TxAbsIntDelay[bd];
- e1000_validate_option(&adapter->tx_abs_int_delay, &opt,
- adapter);
+ e1000_validate_option(&adapter->tx_abs_int_delay, &opt,
+ adapter);
} else {
adapter->tx_abs_int_delay = opt.def;
}
if (num_RxIntDelay > bd) {
adapter->rx_int_delay = RxIntDelay[bd];
- e1000_validate_option(&adapter->rx_int_delay, &opt,
- adapter);
+ e1000_validate_option(&adapter->rx_int_delay, &opt,
+ adapter);
} else {
adapter->rx_int_delay = opt.def;
}
if (num_RxAbsIntDelay > bd) {
adapter->rx_abs_int_delay = RxAbsIntDelay[bd];
- e1000_validate_option(&adapter->rx_abs_int_delay, &opt,
- adapter);
+ e1000_validate_option(&adapter->rx_abs_int_delay, &opt,
+ adapter);
} else {
adapter->rx_abs_int_delay = opt.def;
}
if (num_InterruptThrottleRate > bd) {
adapter->itr = InterruptThrottleRate[bd];
- switch(adapter->itr) {
+ switch (adapter->itr) {
case 0:
- DPRINTK(PROBE, INFO, "%s turned off\n",
- opt.name);
+ DPRINTK(PROBE, INFO, "%s turned off\n",
+ opt.name);
break;
case 1:
- DPRINTK(PROBE, INFO, "%s set to dynamic mode\n",
- opt.name);
+ DPRINTK(PROBE, INFO, "%s set to dynamic mode\n",
+ opt.name);
break;
default:
- e1000_validate_option(&adapter->itr, &opt,
- adapter);
+ e1000_validate_option(&adapter->itr, &opt,
+ adapter);
break;
}
} else {
adapter->itr = opt.def;
}
}
+ { /* Smart Power Down */
+ struct e1000_option opt = {
+ .type = enable_option,
+ .name = "PHY Smart Power Down",
+ .err = "defaulting to Disabled",
+ .def = OPTION_DISABLED
+ };
+
+ if (num_SmartPowerDownEnable > bd) {
+ int spd = SmartPowerDownEnable[bd];
+ e1000_validate_option(&spd, &opt, adapter);
+ adapter->smart_power_down = spd;
+ } else {
+ adapter->smart_power_down = opt.def;
+ }
+ }
+ { /* Kumeran Lock Loss Workaround */
+ struct e1000_option opt = {
+ .type = enable_option,
+ .name = "Kumeran Lock Loss Workaround",
+ .err = "defaulting to Enabled",
+ .def = OPTION_ENABLED
+ };
+
+ if (num_KumeranLockLoss > bd) {
+ int kmrn_lock_loss = KumeranLockLoss[bd];
+ e1000_validate_option(&kmrn_lock_loss, &opt, adapter);
+ adapter->hw.kmrn_lock_loss_workaround_disabled = !kmrn_lock_loss;
+ } else {
+ adapter->hw.kmrn_lock_loss_workaround_disabled = !opt.def;
+ }
+ }
- switch(adapter->hw.media_type) {
+ switch (adapter->hw.media_type) {
case e1000_media_type_fiber:
case e1000_media_type_internal_serdes:
e1000_check_fiber_options(adapter);
e1000_check_fiber_options(struct e1000_adapter *adapter)
{
int bd = adapter->bd_number;
- if(num_Speed > bd) {
+ if (num_Speed > bd) {
DPRINTK(PROBE, INFO, "Speed not valid for fiber adapters, "
"parameter ignored\n");
}
- if(num_Duplex > bd) {
+ if (num_Duplex > bd) {
DPRINTK(PROBE, INFO, "Duplex not valid for fiber adapters, "
"parameter ignored\n");
}
- if((num_AutoNeg > bd) && (AutoNeg[bd] != 0x20)) {
+ if ((num_AutoNeg > bd) && (AutoNeg[bd] != 0x20)) {
DPRINTK(PROBE, INFO, "AutoNeg other than 1000/Full is "
"not valid for fiber adapters, "
"parameter ignored\n");
.p = dplx_list }}
};
+ if (e1000_check_phy_reset_block(&adapter->hw)) {
+ DPRINTK(PROBE, INFO,
+ "Link active due to SoL/IDER Session. "
+ "Speed/Duplex/AutoNeg parameter ignored.\n");
+ return;
+ }
if (num_Duplex > bd) {
dplx = Duplex[bd];
e1000_validate_option(&dplx, &opt, adapter);
}
}
- if((num_AutoNeg > bd) && (speed != 0 || dplx != 0)) {
+ if ((num_AutoNeg > bd) && (speed != 0 || dplx != 0)) {
DPRINTK(PROBE, INFO,
"AutoNeg specified along with Speed or Duplex, "
"parameter ignored\n");
switch (speed + dplx) {
case 0:
adapter->hw.autoneg = adapter->fc_autoneg = 1;
- if((num_Speed > bd) && (speed != 0 || dplx != 0))
+ if ((num_Speed > bd) && (speed != 0 || dplx != 0))
DPRINTK(PROBE, INFO,
"Speed and duplex autonegotiation enabled\n");
break;