/*******************************************************************************
-
- Copyright(c) 1999 - 2004 Intel Corporation. All rights reserved.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by the Free
- Software Foundation; either version 2 of the License, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ Intel PRO/100 Linux driver
+ Copyright(c) 1999 - 2006 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
-
+
You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc., 59
- Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
- The full GNU General Public License is included in this distribution in the
- file called LICENSE.
-
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
Contact Information:
Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*******************************************************************************/
* enabled. 82557 pads with 7Eh, while the later controllers pad
* with 00h.
*
- * IV. Recieve
+ * IV. Receive
*
* The Receive Frame Area (RFA) comprises a ring of Receive Frame
* Descriptors (RFD) + data buffer, thus forming the simplified mode
* the RFD, the RFD must be dma_sync'ed to maintain a consistent
* view from software and hardware.
*
+ * In order to keep updates to the RFD link field from colliding with
+ * hardware writes to mark packets complete, we use the feature that
+ * hardware will not write to a size 0 descriptor and mark the previous
+ * packet as end-of-list (EL). After updating the link, we remove EL
+ * and only then restore the size such that hardware may use the
+ * previous-to-end RFD.
+ *
* Under typical operation, the receive unit (RU) is start once,
* and the controller happily fills RFDs as frames arrive. If
* replacement RFDs cannot be allocated, or the RU goes non-active,
* and Rx indication and re-allocation happen in the same context,
* therefore no locking is required. A software-generated interrupt
* is generated from the watchdog to recover from a failed allocation
- * senario where all Rx resources have been indicated and none re-
+ * scenario where all Rx resources have been indicated and none re-
* placed.
*
* V. Miscellaneous
* TODO:
* o several entry points race with dev->close
* o check for tx-no-resources/stop Q races with tx clean/wake Q
+ *
+ * FIXES:
+ * 2005/12/02 - Michael O'Donnell <Michael.ODonnell at stratus dot com>
+ * - Stratus87247: protect MDI control register manipulations
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/skbuff.h>
#include <linux/ethtool.h>
#include <linux/string.h>
+#include <linux/firmware.h>
#include <asm/unaligned.h>
#define DRV_NAME "e100"
-#define DRV_EXT "-NAPI"
-#define DRV_VERSION "3.4.8-k2"DRV_EXT
+#define DRV_EXT "-NAPI"
+#define DRV_VERSION "3.5.23-k6"DRV_EXT
#define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver"
-#define DRV_COPYRIGHT "Copyright(c) 1999-2005 Intel Corporation"
+#define DRV_COPYRIGHT "Copyright(c) 1999-2006 Intel Corporation"
#define PFX DRV_NAME ": "
#define E100_WATCHDOG_PERIOD (2 * HZ)
#define E100_NAPI_WEIGHT 16
+#define FIRMWARE_D101M "e100/d101m_ucode.bin"
+#define FIRMWARE_D101S "e100/d101s_ucode.bin"
+#define FIRMWARE_D102E "e100/d102e_ucode.bin"
+
MODULE_DESCRIPTION(DRV_DESCRIPTION);
MODULE_AUTHOR(DRV_COPYRIGHT);
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
+MODULE_FIRMWARE(FIRMWARE_D101M);
+MODULE_FIRMWARE(FIRMWARE_D101S);
+MODULE_FIRMWARE(FIRMWARE_D102E);
static int debug = 3;
+static int eeprom_bad_csum_allow = 0;
+static int use_io = 0;
module_param(debug, int, 0);
+module_param(eeprom_bad_csum_allow, int, 0);
+module_param(use_io, int, 0);
MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
+MODULE_PARM_DESC(eeprom_bad_csum_allow, "Allow bad eeprom checksums");
+MODULE_PARM_DESC(use_io, "Force use of i/o access mode");
#define DPRINTK(nlevel, klevel, fmt, args...) \
(void)((NETIF_MSG_##nlevel & nic->msg_enable) && \
printk(KERN_##klevel PFX "%s: %s: " fmt, nic->netdev->name, \
- __FUNCTION__ , ## args))
+ __func__ , ## args))
#define INTEL_8255X_ETHERNET_DEVICE(device_id, ich) {\
PCI_VENDOR_ID_INTEL, device_id, PCI_ANY_ID, PCI_ANY_ID, \
};
enum scb_status {
+ rus_no_res = 0x08,
rus_ready = 0x10,
rus_mask = 0x3C,
};
cuc_dump_complete = 0x0000A005,
cuc_dump_reset_complete = 0x0000A007,
};
-
+
enum port {
software_reset = 0x0000,
selftest = 0x0001,
};
struct rfd {
- u16 status;
- u16 command;
- u32 link;
- u32 rbd;
- u16 actual_size;
- u16 size;
+ __le16 status;
+ __le16 command;
+ __le32 link;
+ __le32 rbd;
+ __le16 actual_size;
+ __le16 size;
};
struct rx {
#define E100_MAX_MULTICAST_ADDRS 64
struct multi {
- u16 count;
+ __le16 count;
u8 addr[E100_MAX_MULTICAST_ADDRS * ETH_ALEN + 2/*pad*/];
};
/* Important: keep total struct u32-aligned */
#define UCODE_SIZE 134
struct cb {
- u16 status;
- u16 command;
- u32 link;
+ __le16 status;
+ __le16 command;
+ __le32 link;
union {
u8 iaaddr[ETH_ALEN];
- u32 ucode[UCODE_SIZE];
+ __le32 ucode[UCODE_SIZE];
struct config config;
struct multi multi;
struct {
u8 threshold;
u8 tbd_count;
struct {
- u32 buf_addr;
- u16 size;
+ __le32 buf_addr;
+ __le16 size;
u16 eol;
} tbd;
} tcb;
- u32 dump_buffer_addr;
+ __le32 dump_buffer_addr;
} u;
struct cb *next, *prev;
dma_addr_t dma_addr;
};
struct stats {
- u32 tx_good_frames, tx_max_collisions, tx_late_collisions,
+ __le32 tx_good_frames, tx_max_collisions, tx_late_collisions,
tx_underruns, tx_lost_crs, tx_deferred, tx_single_collisions,
tx_multiple_collisions, tx_total_collisions;
- u32 rx_good_frames, rx_crc_errors, rx_alignment_errors,
+ __le32 rx_good_frames, rx_crc_errors, rx_alignment_errors,
rx_resource_errors, rx_overrun_errors, rx_cdt_errors,
rx_short_frame_errors;
- u32 fc_xmt_pause, fc_rcv_pause, fc_rcv_unsupported;
- u16 xmt_tco_frames, rcv_tco_frames;
- u32 complete;
+ __le32 fc_xmt_pause, fc_rcv_pause, fc_rcv_unsupported;
+ __le16 xmt_tco_frames, rcv_tco_frames;
+ __le32 complete;
};
struct mem {
struct csr __iomem *csr;
enum scb_cmd_lo cuc_cmd;
unsigned int cbs_avail;
+ struct napi_struct napi;
struct cb *cbs;
struct cb *cb_to_use;
struct cb *cb_to_send;
struct cb *cb_to_clean;
- u16 tx_command;
+ __le16 tx_command;
/* End: frequently used values: keep adjacent for cache effect */
enum {
enum mac mac;
enum phy phy;
struct params params;
- struct net_device_stats net_stats;
struct timer_list watchdog;
struct timer_list blink_timer;
struct mii_if_info mii;
u32 rx_tco_frames;
u32 rx_over_length_errors;
- u8 rev_id;
u16 leds;
u16 eeprom_wc;
- u16 eeprom[256];
+ __le16 eeprom[256];
+ spinlock_t mdio_lock;
};
static inline void e100_write_flush(struct nic *nic)
{
/* Flush previous PCI writes through intermediate bridges
* by doing a benign read */
- (void)readb(&nic->csr->scb.status);
+ (void)ioread8(&nic->csr->scb.status);
}
-static inline void e100_enable_irq(struct nic *nic)
+static void e100_enable_irq(struct nic *nic)
{
unsigned long flags;
spin_lock_irqsave(&nic->cmd_lock, flags);
- writeb(irq_mask_none, &nic->csr->scb.cmd_hi);
- spin_unlock_irqrestore(&nic->cmd_lock, flags);
+ iowrite8(irq_mask_none, &nic->csr->scb.cmd_hi);
e100_write_flush(nic);
+ spin_unlock_irqrestore(&nic->cmd_lock, flags);
}
-static inline void e100_disable_irq(struct nic *nic)
+static void e100_disable_irq(struct nic *nic)
{
unsigned long flags;
spin_lock_irqsave(&nic->cmd_lock, flags);
- writeb(irq_mask_all, &nic->csr->scb.cmd_hi);
- spin_unlock_irqrestore(&nic->cmd_lock, flags);
+ iowrite8(irq_mask_all, &nic->csr->scb.cmd_hi);
e100_write_flush(nic);
+ spin_unlock_irqrestore(&nic->cmd_lock, flags);
}
static void e100_hw_reset(struct nic *nic)
{
/* Put CU and RU into idle with a selective reset to get
* device off of PCI bus */
- writel(selective_reset, &nic->csr->port);
+ iowrite32(selective_reset, &nic->csr->port);
e100_write_flush(nic); udelay(20);
/* Now fully reset device */
- writel(software_reset, &nic->csr->port);
+ iowrite32(software_reset, &nic->csr->port);
e100_write_flush(nic); udelay(20);
/* Mask off our interrupt line - it's unmasked after reset */
nic->mem->selftest.signature = 0;
nic->mem->selftest.result = 0xFFFFFFFF;
- writel(selftest | dma_addr, &nic->csr->port);
+ iowrite32(selftest | dma_addr, &nic->csr->port);
e100_write_flush(nic);
/* Wait 10 msec for self-test to complete */
msleep(10);
e100_disable_irq(nic);
/* Check results of self-test */
- if(nic->mem->selftest.result != 0) {
+ if (nic->mem->selftest.result != 0) {
DPRINTK(HW, ERR, "Self-test failed: result=0x%08X\n",
nic->mem->selftest.result);
return -ETIMEDOUT;
}
- if(nic->mem->selftest.signature == 0) {
+ if (nic->mem->selftest.signature == 0) {
DPRINTK(HW, ERR, "Self-test failed: timed out\n");
return -ETIMEDOUT;
}
return 0;
}
-static void e100_eeprom_write(struct nic *nic, u16 addr_len, u16 addr, u16 data)
+static void e100_eeprom_write(struct nic *nic, u16 addr_len, u16 addr, __le16 data)
{
u32 cmd_addr_data[3];
u8 ctrl;
/* Three cmds: write/erase enable, write data, write/erase disable */
cmd_addr_data[0] = op_ewen << (addr_len - 2);
cmd_addr_data[1] = (((op_write << addr_len) | addr) << 16) |
- cpu_to_le16(data);
+ le16_to_cpu(data);
cmd_addr_data[2] = op_ewds << (addr_len - 2);
/* Bit-bang cmds to write word to eeprom */
- for(j = 0; j < 3; j++) {
+ for (j = 0; j < 3; j++) {
/* Chip select */
- writeb(eecs | eesk, &nic->csr->eeprom_ctrl_lo);
+ iowrite8(eecs | eesk, &nic->csr->eeprom_ctrl_lo);
e100_write_flush(nic); udelay(4);
- for(i = 31; i >= 0; i--) {
+ for (i = 31; i >= 0; i--) {
ctrl = (cmd_addr_data[j] & (1 << i)) ?
eecs | eedi : eecs;
- writeb(ctrl, &nic->csr->eeprom_ctrl_lo);
+ iowrite8(ctrl, &nic->csr->eeprom_ctrl_lo);
e100_write_flush(nic); udelay(4);
- writeb(ctrl | eesk, &nic->csr->eeprom_ctrl_lo);
+ iowrite8(ctrl | eesk, &nic->csr->eeprom_ctrl_lo);
e100_write_flush(nic); udelay(4);
}
/* Wait 10 msec for cmd to complete */
msleep(10);
/* Chip deselect */
- writeb(0, &nic->csr->eeprom_ctrl_lo);
+ iowrite8(0, &nic->csr->eeprom_ctrl_lo);
e100_write_flush(nic); udelay(4);
}
};
/* General technique stolen from the eepro100 driver - very clever */
-static u16 e100_eeprom_read(struct nic *nic, u16 *addr_len, u16 addr)
+static __le16 e100_eeprom_read(struct nic *nic, u16 *addr_len, u16 addr)
{
u32 cmd_addr_data;
u16 data = 0;
cmd_addr_data = ((op_read << *addr_len) | addr) << 16;
/* Chip select */
- writeb(eecs | eesk, &nic->csr->eeprom_ctrl_lo);
+ iowrite8(eecs | eesk, &nic->csr->eeprom_ctrl_lo);
e100_write_flush(nic); udelay(4);
/* Bit-bang to read word from eeprom */
- for(i = 31; i >= 0; i--) {
+ for (i = 31; i >= 0; i--) {
ctrl = (cmd_addr_data & (1 << i)) ? eecs | eedi : eecs;
- writeb(ctrl, &nic->csr->eeprom_ctrl_lo);
+ iowrite8(ctrl, &nic->csr->eeprom_ctrl_lo);
e100_write_flush(nic); udelay(4);
-
- writeb(ctrl | eesk, &nic->csr->eeprom_ctrl_lo);
+
+ iowrite8(ctrl | eesk, &nic->csr->eeprom_ctrl_lo);
e100_write_flush(nic); udelay(4);
-
+
/* Eeprom drives a dummy zero to EEDO after receiving
* complete address. Use this to adjust addr_len. */
- ctrl = readb(&nic->csr->eeprom_ctrl_lo);
- if(!(ctrl & eedo) && i > 16) {
+ ctrl = ioread8(&nic->csr->eeprom_ctrl_lo);
+ if (!(ctrl & eedo) && i > 16) {
*addr_len -= (i - 16);
i = 17;
}
-
+
data = (data << 1) | (ctrl & eedo ? 1 : 0);
}
/* Chip deselect */
- writeb(0, &nic->csr->eeprom_ctrl_lo);
+ iowrite8(0, &nic->csr->eeprom_ctrl_lo);
e100_write_flush(nic); udelay(4);
- return le16_to_cpu(data);
+ return cpu_to_le16(data);
};
/* Load entire EEPROM image into driver cache and validate checksum */
e100_eeprom_read(nic, &addr_len, 0);
nic->eeprom_wc = 1 << addr_len;
- for(addr = 0; addr < nic->eeprom_wc; addr++) {
+ for (addr = 0; addr < nic->eeprom_wc; addr++) {
nic->eeprom[addr] = e100_eeprom_read(nic, &addr_len, addr);
- if(addr < nic->eeprom_wc - 1)
- checksum += cpu_to_le16(nic->eeprom[addr]);
+ if (addr < nic->eeprom_wc - 1)
+ checksum += le16_to_cpu(nic->eeprom[addr]);
}
/* The checksum, stored in the last word, is calculated such that
* the sum of words should be 0xBABA */
- checksum = le16_to_cpu(0xBABA - checksum);
- if(checksum != nic->eeprom[nic->eeprom_wc - 1]) {
+ if (cpu_to_le16(0xBABA - checksum) != nic->eeprom[nic->eeprom_wc - 1]) {
DPRINTK(PROBE, ERR, "EEPROM corrupted\n");
- return -EAGAIN;
+ if (!eeprom_bad_csum_allow)
+ return -EAGAIN;
}
return 0;
e100_eeprom_read(nic, &addr_len, 0);
nic->eeprom_wc = 1 << addr_len;
- if(start + count >= nic->eeprom_wc)
+ if (start + count >= nic->eeprom_wc)
return -EINVAL;
- for(addr = start; addr < start + count; addr++)
+ for (addr = start; addr < start + count; addr++)
e100_eeprom_write(nic, addr_len, addr, nic->eeprom[addr]);
/* The checksum, stored in the last word, is calculated such that
* the sum of words should be 0xBABA */
- for(addr = 0; addr < nic->eeprom_wc - 1; addr++)
- checksum += cpu_to_le16(nic->eeprom[addr]);
- nic->eeprom[nic->eeprom_wc - 1] = le16_to_cpu(0xBABA - checksum);
+ for (addr = 0; addr < nic->eeprom_wc - 1; addr++)
+ checksum += le16_to_cpu(nic->eeprom[addr]);
+ nic->eeprom[nic->eeprom_wc - 1] = cpu_to_le16(0xBABA - checksum);
e100_eeprom_write(nic, addr_len, nic->eeprom_wc - 1,
nic->eeprom[nic->eeprom_wc - 1]);
}
#define E100_WAIT_SCB_TIMEOUT 20000 /* we might have to wait 100ms!!! */
-static inline int e100_exec_cmd(struct nic *nic, u8 cmd, dma_addr_t dma_addr)
+#define E100_WAIT_SCB_FAST 20 /* delay like the old code */
+static int e100_exec_cmd(struct nic *nic, u8 cmd, dma_addr_t dma_addr)
{
unsigned long flags;
unsigned int i;
spin_lock_irqsave(&nic->cmd_lock, flags);
/* Previous command is accepted when SCB clears */
- for(i = 0; i < E100_WAIT_SCB_TIMEOUT; i++) {
- if(likely(!readb(&nic->csr->scb.cmd_lo)))
+ for (i = 0; i < E100_WAIT_SCB_TIMEOUT; i++) {
+ if (likely(!ioread8(&nic->csr->scb.cmd_lo)))
break;
cpu_relax();
- if(unlikely(i > (E100_WAIT_SCB_TIMEOUT >> 1)))
+ if (unlikely(i > E100_WAIT_SCB_FAST))
udelay(5);
}
- if(unlikely(i == E100_WAIT_SCB_TIMEOUT)) {
+ if (unlikely(i == E100_WAIT_SCB_TIMEOUT)) {
err = -EAGAIN;
goto err_unlock;
}
- if(unlikely(cmd != cuc_resume))
- writel(dma_addr, &nic->csr->scb.gen_ptr);
- writeb(cmd, &nic->csr->scb.cmd_lo);
+ if (unlikely(cmd != cuc_resume))
+ iowrite32(dma_addr, &nic->csr->scb.gen_ptr);
+ iowrite8(cmd, &nic->csr->scb.cmd_lo);
err_unlock:
spin_unlock_irqrestore(&nic->cmd_lock, flags);
return err;
}
-static inline int e100_exec_cb(struct nic *nic, struct sk_buff *skb,
+static int e100_exec_cb(struct nic *nic, struct sk_buff *skb,
void (*cb_prepare)(struct nic *, struct cb *, struct sk_buff *))
{
struct cb *cb;
spin_lock_irqsave(&nic->cb_lock, flags);
- if(unlikely(!nic->cbs_avail)) {
+ if (unlikely(!nic->cbs_avail)) {
err = -ENOMEM;
goto err_unlock;
}
nic->cbs_avail--;
cb->skb = skb;
- if(unlikely(!nic->cbs_avail))
+ if (unlikely(!nic->cbs_avail))
err = -ENOSPC;
cb_prepare(nic, cb, skb);
wmb();
cb->prev->command &= cpu_to_le16(~cb_s);
- while(nic->cb_to_send != nic->cb_to_use) {
- if(unlikely(e100_exec_cmd(nic, nic->cuc_cmd,
+ while (nic->cb_to_send != nic->cb_to_use) {
+ if (unlikely(e100_exec_cmd(nic, nic->cuc_cmd,
nic->cb_to_send->dma_addr))) {
/* Ok, here's where things get sticky. It's
* possible that we can't schedule the command
* because the controller is too busy, so
* let's just queue the command and try again
* when another command is scheduled. */
- if(err == -ENOSPC) {
+ if (err == -ENOSPC) {
//request a reset
schedule_work(&nic->tx_timeout_task);
}
{
u32 data_out = 0;
unsigned int i;
+ unsigned long flags;
- writel((reg << 16) | (addr << 21) | dir | data, &nic->csr->mdi_ctrl);
- for(i = 0; i < 100; i++) {
- udelay(20);
- if((data_out = readl(&nic->csr->mdi_ctrl)) & mdi_ready)
+ /*
+ * Stratus87247: we shouldn't be writing the MDI control
+ * register until the Ready bit shows True. Also, since
+ * manipulation of the MDI control registers is a multi-step
+ * procedure it should be done under lock.
+ */
+ spin_lock_irqsave(&nic->mdio_lock, flags);
+ for (i = 100; i; --i) {
+ if (ioread32(&nic->csr->mdi_ctrl) & mdi_ready)
break;
+ udelay(20);
}
+ if (unlikely(!i)) {
+ printk("e100.mdio_ctrl(%s) won't go Ready\n",
+ nic->netdev->name );
+ spin_unlock_irqrestore(&nic->mdio_lock, flags);
+ return 0; /* No way to indicate timeout error */
+ }
+ iowrite32((reg << 16) | (addr << 21) | dir | data, &nic->csr->mdi_ctrl);
+ for (i = 0; i < 100; i++) {
+ udelay(20);
+ if ((data_out = ioread32(&nic->csr->mdi_ctrl)) & mdi_ready)
+ break;
+ }
+ spin_unlock_irqrestore(&nic->mdio_lock, flags);
DPRINTK(HW, DEBUG,
"%s:addr=%d, reg=%d, data_in=0x%04X, data_out=0x%04X\n",
dir == mdi_read ? "READ" : "WRITE", addr, reg, data, data_out);
static void e100_get_defaults(struct nic *nic)
{
- struct param_range rfds = { .min = 16, .max = 256, .count = 64 };
- struct param_range cbs = { .min = 64, .max = 256, .count = 64 };
+ struct param_range rfds = { .min = 16, .max = 256, .count = 256 };
+ struct param_range cbs = { .min = 64, .max = 256, .count = 128 };
- pci_read_config_byte(nic->pdev, PCI_REVISION_ID, &nic->rev_id);
/* MAC type is encoded as rev ID; exception: ICH is treated as 82559 */
- nic->mac = (nic->flags & ich) ? mac_82559_D101M : nic->rev_id;
- if(nic->mac == mac_unknown)
+ nic->mac = (nic->flags & ich) ? mac_82559_D101M : nic->pdev->revision;
+ if (nic->mac == mac_unknown)
nic->mac = mac_82557_D100_A;
nic->params.rfds = rfds;
/* Quadwords to DMA into FIFO before starting frame transmit */
nic->tx_threshold = 0xE0;
- /* no interrupt for every tx completion, delay = 256us if not 557*/
+ /* no interrupt for every tx completion, delay = 256us if not 557 */
nic->tx_command = cpu_to_le16(cb_tx | cb_tx_sf |
((nic->mac >= mac_82558_D101_A4) ? cb_cid : cb_i));
/* Template for a freshly allocated RFD */
- nic->blank_rfd.command = cpu_to_le16(cb_el);
- nic->blank_rfd.rbd = 0xFFFFFFFF;
+ nic->blank_rfd.command = 0;
+ nic->blank_rfd.rbd = cpu_to_le32(0xFFFFFFFF);
nic->blank_rfd.size = cpu_to_le16(VLAN_ETH_FRAME_LEN);
/* MII setup */
config->adaptive_ifs = nic->adaptive_ifs;
config->loopback = nic->loopback;
- if(nic->mii.force_media && nic->mii.full_duplex)
+ if (nic->mii.force_media && nic->mii.full_duplex)
config->full_duplex_force = 0x1; /* 1=force, 0=auto */
- if(nic->flags & promiscuous || nic->loopback) {
+ if (nic->flags & promiscuous || nic->loopback) {
config->rx_save_bad_frames = 0x1; /* 1=save, 0=discard */
config->rx_discard_short_frames = 0x0; /* 1=discard, 0=save */
config->promiscuous_mode = 0x1; /* 1=on, 0=off */
}
- if(nic->flags & multicast_all)
+ if (nic->flags & multicast_all)
config->multicast_all = 0x1; /* 1=accept, 0=no */
/* disable WoL when up */
- if(netif_running(nic->netdev) || !(nic->flags & wol_magic))
+ if (netif_running(nic->netdev) || !(nic->flags & wol_magic))
config->magic_packet_disable = 0x1; /* 1=off, 0=on */
- if(nic->mac >= mac_82558_D101_A4) {
+ if (nic->mac >= mac_82558_D101_A4) {
config->fc_disable = 0x1; /* 1=Tx fc off, 0=Tx fc on */
config->mwi_enable = 0x1; /* 1=enable, 0=disable */
config->standard_tcb = 0x0; /* 1=standard, 0=extended */
config->rx_long_ok = 0x1; /* 1=VLANs ok, 0=standard */
- if(nic->mac >= mac_82559_D101M)
+ if (nic->mac >= mac_82559_D101M) {
config->tno_intr = 0x1; /* TCO stats enable */
- else
+ /* Enable TCO in extended config */
+ if (nic->mac >= mac_82551_10) {
+ config->byte_count = 0x20; /* extended bytes */
+ config->rx_d102_mode = 0x1; /* GMRC for TCO */
+ }
+ } else {
config->standard_stat_counter = 0x0;
+ }
}
DPRINTK(HW, DEBUG, "[00-07]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
c[16], c[17], c[18], c[19], c[20], c[21], c[22], c[23]);
}
-static void e100_load_ucode(struct nic *nic, struct cb *cb, struct sk_buff *skb)
+/*************************************************************************
+* CPUSaver parameters
+*
+* All CPUSaver parameters are 16-bit literals that are part of a
+* "move immediate value" instruction. By changing the value of
+* the literal in the instruction before the code is loaded, the
+* driver can change the algorithm.
+*
+* INTDELAY - This loads the dead-man timer with its initial value.
+* When this timer expires the interrupt is asserted, and the
+* timer is reset each time a new packet is received. (see
+* BUNDLEMAX below to set the limit on number of chained packets)
+* The current default is 0x600 or 1536. Experiments show that
+* the value should probably stay within the 0x200 - 0x1000.
+*
+* BUNDLEMAX -
+* This sets the maximum number of frames that will be bundled. In
+* some situations, such as the TCP windowing algorithm, it may be
+* better to limit the growth of the bundle size than let it go as
+* high as it can, because that could cause too much added latency.
+* The default is six, because this is the number of packets in the
+* default TCP window size. A value of 1 would make CPUSaver indicate
+* an interrupt for every frame received. If you do not want to put
+* a limit on the bundle size, set this value to xFFFF.
+*
+* BUNDLESMALL -
+* This contains a bit-mask describing the minimum size frame that
+* will be bundled. The default masks the lower 7 bits, which means
+* that any frame less than 128 bytes in length will not be bundled,
+* but will instead immediately generate an interrupt. This does
+* not affect the current bundle in any way. Any frame that is 128
+* bytes or large will be bundled normally. This feature is meant
+* to provide immediate indication of ACK frames in a TCP environment.
+* Customers were seeing poor performance when a machine with CPUSaver
+* enabled was sending but not receiving. The delay introduced when
+* the ACKs were received was enough to reduce total throughput, because
+* the sender would sit idle until the ACK was finally seen.
+*
+* The current default is 0xFF80, which masks out the lower 7 bits.
+* This means that any frame which is x7F (127) bytes or smaller
+* will cause an immediate interrupt. Because this value must be a
+* bit mask, there are only a few valid values that can be used. To
+* turn this feature off, the driver can write the value xFFFF to the
+* lower word of this instruction (in the same way that the other
+* parameters are used). Likewise, a value of 0xF800 (2047) would
+* cause an interrupt to be generated for every frame, because all
+* standard Ethernet frames are <= 2047 bytes in length.
+*************************************************************************/
+
+/* if you wish to disable the ucode functionality, while maintaining the
+ * workarounds it provides, set the following defines to:
+ * BUNDLESMALL 0
+ * BUNDLEMAX 1
+ * INTDELAY 1
+ */
+#define BUNDLESMALL 1
+#define BUNDLEMAX (u16)6
+#define INTDELAY (u16)1536 /* 0x600 */
+
+/* Initialize firmware */
+static const struct firmware *e100_request_firmware(struct nic *nic)
{
- int i;
- static const u32 ucode[UCODE_SIZE] = {
- /* NFS packets are misinterpreted as TCO packets and
- * incorrectly routed to the BMC over SMBus. This
- * microcode patch checks the fragmented IP bit in the
- * NFS/UDP header to distinguish between NFS and TCO. */
- 0x0EF70E36, 0x1FFF1FFF, 0x1FFF1FFF, 0x1FFF1FFF, 0x1FFF1FFF,
- 0x1FFF1FFF, 0x00906E41, 0x00800E3C, 0x00E00E39, 0x00000000,
- 0x00906EFD, 0x00900EFD, 0x00E00EF8,
- };
+ const char *fw_name;
+ const struct firmware *fw;
+ u8 timer, bundle, min_size;
+ int err;
+
+ /* do not load u-code for ICH devices */
+ if (nic->flags & ich)
+ return NULL;
+
+ /* Search for ucode match against h/w revision */
+ if (nic->mac == mac_82559_D101M)
+ fw_name = FIRMWARE_D101M;
+ else if (nic->mac == mac_82559_D101S)
+ fw_name = FIRMWARE_D101S;
+ else if (nic->mac == mac_82551_F || nic->mac == mac_82551_10)
+ fw_name = FIRMWARE_D102E;
+ else /* No ucode on other devices */
+ return NULL;
+
+ err = request_firmware(&fw, fw_name, &nic->pdev->dev);
+ if (err) {
+ DPRINTK(PROBE, ERR, "Failed to load firmware \"%s\": %d\n",
+ fw_name, err);
+ return ERR_PTR(err);
+ }
+ /* Firmware should be precisely UCODE_SIZE (words) plus three bytes
+ indicating the offsets for BUNDLESMALL, BUNDLEMAX, INTDELAY */
+ if (fw->size != UCODE_SIZE * 4 + 3) {
+ DPRINTK(PROBE, ERR, "Firmware \"%s\" has wrong size %zu\n",
+ fw_name, fw->size);
+ release_firmware(fw);
+ return ERR_PTR(-EINVAL);
+ }
+
+ /* Read timer, bundle and min_size from end of firmware blob */
+ timer = fw->data[UCODE_SIZE * 4];
+ bundle = fw->data[UCODE_SIZE * 4 + 1];
+ min_size = fw->data[UCODE_SIZE * 4 + 2];
+
+ if (timer >= UCODE_SIZE || bundle >= UCODE_SIZE ||
+ min_size >= UCODE_SIZE) {
+ DPRINTK(PROBE, ERR,
+ "\"%s\" has bogus offset values (0x%x,0x%x,0x%x)\n",
+ fw_name, timer, bundle, min_size);
+ release_firmware(fw);
+ return ERR_PTR(-EINVAL);
+ }
+ /* OK, firmware is validated and ready to use... */
+ return fw;
+}
+
+static void e100_setup_ucode(struct nic *nic, struct cb *cb,
+ struct sk_buff *skb)
+{
+ const struct firmware *fw = (void *)skb;
+ u8 timer, bundle, min_size;
+
+ /* It's not a real skb; we just abused the fact that e100_exec_cb
+ will pass it through to here... */
+ cb->skb = NULL;
+
+ /* firmware is stored as little endian already */
+ memcpy(cb->u.ucode, fw->data, UCODE_SIZE * 4);
+
+ /* Read timer, bundle and min_size from end of firmware blob */
+ timer = fw->data[UCODE_SIZE * 4];
+ bundle = fw->data[UCODE_SIZE * 4 + 1];
+ min_size = fw->data[UCODE_SIZE * 4 + 2];
- if(nic->mac == mac_82551_F || nic->mac == mac_82551_10) {
- for(i = 0; i < UCODE_SIZE; i++)
- cb->u.ucode[i] = cpu_to_le32(ucode[i]);
- cb->command = cpu_to_le16(cb_ucode);
- } else
- cb->command = cpu_to_le16(cb_nop);
+ /* Insert user-tunable settings in cb->u.ucode */
+ cb->u.ucode[timer] &= cpu_to_le32(0xFFFF0000);
+ cb->u.ucode[timer] |= cpu_to_le32(INTDELAY);
+ cb->u.ucode[bundle] &= cpu_to_le32(0xFFFF0000);
+ cb->u.ucode[bundle] |= cpu_to_le32(BUNDLEMAX);
+ cb->u.ucode[min_size] &= cpu_to_le32(0xFFFF0000);
+ cb->u.ucode[min_size] |= cpu_to_le32((BUNDLESMALL) ? 0xFFFF : 0xFF80);
+
+ cb->command = cpu_to_le16(cb_ucode | cb_el);
+}
+
+static inline int e100_load_ucode_wait(struct nic *nic)
+{
+ const struct firmware *fw;
+ int err = 0, counter = 50;
+ struct cb *cb = nic->cb_to_clean;
+
+ fw = e100_request_firmware(nic);
+ /* If it's NULL, then no ucode is required */
+ if (!fw || IS_ERR(fw))
+ return PTR_ERR(fw);
+
+ if ((err = e100_exec_cb(nic, (void *)fw, e100_setup_ucode)))
+ DPRINTK(PROBE,ERR, "ucode cmd failed with error %d\n", err);
+
+ /* must restart cuc */
+ nic->cuc_cmd = cuc_start;
+
+ /* wait for completion */
+ e100_write_flush(nic);
+ udelay(10);
+
+ /* wait for possibly (ouch) 500ms */
+ while (!(cb->status & cpu_to_le16(cb_complete))) {
+ msleep(10);
+ if (!--counter) break;
+ }
+
+ /* ack any interrupts, something could have been set */
+ iowrite8(~0, &nic->csr->scb.stat_ack);
+
+ /* if the command failed, or is not OK, notify and return */
+ if (!counter || !(cb->status & cpu_to_le16(cb_ok))) {
+ DPRINTK(PROBE,ERR, "ucode load failed\n");
+ err = -EPERM;
+ }
+
+ return err;
}
static void e100_setup_iaaddr(struct nic *nic, struct cb *cb,
u16 bmcr, stat, id_lo, id_hi, cong;
/* Discover phy addr by searching addrs in order {1,0,2,..., 31} */
- for(addr = 0; addr < 32; addr++) {
+ for (addr = 0; addr < 32; addr++) {
nic->mii.phy_id = (addr == 0) ? 1 : (addr == 1) ? 0 : addr;
bmcr = mdio_read(netdev, nic->mii.phy_id, MII_BMCR);
stat = mdio_read(netdev, nic->mii.phy_id, MII_BMSR);
stat = mdio_read(netdev, nic->mii.phy_id, MII_BMSR);
- if(!((bmcr == 0xFFFF) || ((stat == 0) && (bmcr == 0))))
+ if (!((bmcr == 0xFFFF) || ((stat == 0) && (bmcr == 0))))
break;
}
DPRINTK(HW, DEBUG, "phy_addr = %d\n", nic->mii.phy_id);
- if(addr == 32)
+ if (addr == 32)
return -EAGAIN;
/* Selected the phy and isolate the rest */
- for(addr = 0; addr < 32; addr++) {
- if(addr != nic->mii.phy_id) {
+ for (addr = 0; addr < 32; addr++) {
+ if (addr != nic->mii.phy_id) {
mdio_write(netdev, addr, MII_BMCR, BMCR_ISOLATE);
} else {
bmcr = mdio_read(netdev, addr, MII_BMCR);
/* Handle National tx phys */
#define NCS_PHY_MODEL_MASK 0xFFF0FFFF
- if((nic->phy & NCS_PHY_MODEL_MASK) == phy_nsc_tx) {
+ if ((nic->phy & NCS_PHY_MODEL_MASK) == phy_nsc_tx) {
/* Disable congestion control */
cong = mdio_read(netdev, nic->mii.phy_id, MII_NSC_CONG);
cong |= NSC_CONG_TXREADY;
mdio_write(netdev, nic->mii.phy_id, MII_NSC_CONG, cong);
}
- if((nic->mac >= mac_82550_D102) || ((nic->flags & ich) &&
- (mdio_read(netdev, nic->mii.phy_id, MII_TPISTATUS) & 0x8000) &&
- (nic->eeprom[eeprom_cnfg_mdix] & eeprom_mdix_enabled)))
- /* enable/disable MDI/MDI-X auto-switching */
+ if ((nic->mac >= mac_82550_D102) || ((nic->flags & ich) &&
+ (mdio_read(netdev, nic->mii.phy_id, MII_TPISTATUS) & 0x8000) &&
+ !(nic->eeprom[eeprom_cnfg_mdix] & eeprom_mdix_enabled))) {
+ /* enable/disable MDI/MDI-X auto-switching. */
mdio_write(netdev, nic->mii.phy_id, MII_NCONFIG,
- nic->mii.force_media ? 0 : NCONFIG_AUTO_SWITCH);
+ nic->mii.force_media ? 0 : NCONFIG_AUTO_SWITCH);
+ }
return 0;
}
e100_hw_reset(nic);
DPRINTK(HW, ERR, "e100_hw_init\n");
- if(!in_interrupt() && (err = e100_self_test(nic)))
+ if (!in_interrupt() && (err = e100_self_test(nic)))
return err;
- if((err = e100_phy_init(nic)))
+ if ((err = e100_phy_init(nic)))
return err;
- if((err = e100_exec_cmd(nic, cuc_load_base, 0)))
+ if ((err = e100_exec_cmd(nic, cuc_load_base, 0)))
return err;
- if((err = e100_exec_cmd(nic, ruc_load_base, 0)))
+ if ((err = e100_exec_cmd(nic, ruc_load_base, 0)))
return err;
- if((err = e100_exec_cb(nic, NULL, e100_load_ucode)))
+ if ((err = e100_load_ucode_wait(nic)))
return err;
- if((err = e100_exec_cb(nic, NULL, e100_configure)))
+ if ((err = e100_exec_cb(nic, NULL, e100_configure)))
return err;
- if((err = e100_exec_cb(nic, NULL, e100_setup_iaaddr)))
+ if ((err = e100_exec_cb(nic, NULL, e100_setup_iaaddr)))
return err;
- if((err = e100_exec_cmd(nic, cuc_dump_addr,
+ if ((err = e100_exec_cmd(nic, cuc_dump_addr,
nic->dma_addr + offsetof(struct mem, stats))))
return err;
- if((err = e100_exec_cmd(nic, cuc_dump_reset, 0)))
+ if ((err = e100_exec_cmd(nic, cuc_dump_reset, 0)))
return err;
e100_disable_irq(nic);
cb->command = cpu_to_le16(cb_multi);
cb->u.multi.count = cpu_to_le16(count * ETH_ALEN);
- for(i = 0; list && i < count; i++, list = list->next)
+ for (i = 0; list && i < count; i++, list = list->next)
memcpy(&cb->u.multi.addr[i*ETH_ALEN], &list->dmi_addr,
ETH_ALEN);
}
DPRINTK(HW, DEBUG, "mc_count=%d, flags=0x%04X\n",
netdev->mc_count, netdev->flags);
- if(netdev->flags & IFF_PROMISC)
+ if (netdev->flags & IFF_PROMISC)
nic->flags |= promiscuous;
else
nic->flags &= ~promiscuous;
- if(netdev->flags & IFF_ALLMULTI ||
+ if (netdev->flags & IFF_ALLMULTI ||
netdev->mc_count > E100_MAX_MULTICAST_ADDRS)
nic->flags |= multicast_all;
else
static void e100_update_stats(struct nic *nic)
{
- struct net_device_stats *ns = &nic->net_stats;
+ struct net_device *dev = nic->netdev;
+ struct net_device_stats *ns = &dev->stats;
struct stats *s = &nic->mem->stats;
- u32 *complete = (nic->mac < mac_82558_D101_A4) ? &s->fc_xmt_pause :
- (nic->mac < mac_82559_D101M) ? (u32 *)&s->xmt_tco_frames :
+ __le32 *complete = (nic->mac < mac_82558_D101_A4) ? &s->fc_xmt_pause :
+ (nic->mac < mac_82559_D101M) ? (__le32 *)&s->xmt_tco_frames :
&s->complete;
/* Device's stats reporting may take several microseconds to
- * complete, so where always waiting for results of the
+ * complete, so we're always waiting for results of the
* previous command. */
- if(*complete == le32_to_cpu(cuc_dump_reset_complete)) {
+ if (*complete == cpu_to_le32(cuc_dump_reset_complete)) {
*complete = 0;
nic->tx_frames = le32_to_cpu(s->tx_good_frames);
nic->tx_collisions = le32_to_cpu(s->tx_total_collisions);
ns->collisions += nic->tx_collisions;
ns->tx_errors += le32_to_cpu(s->tx_max_collisions) +
le32_to_cpu(s->tx_lost_crs);
- ns->rx_dropped += le32_to_cpu(s->rx_resource_errors);
ns->rx_length_errors += le32_to_cpu(s->rx_short_frame_errors) +
nic->rx_over_length_errors;
ns->rx_crc_errors += le32_to_cpu(s->rx_crc_errors);
ns->rx_frame_errors += le32_to_cpu(s->rx_alignment_errors);
ns->rx_over_errors += le32_to_cpu(s->rx_overrun_errors);
ns->rx_fifo_errors += le32_to_cpu(s->rx_overrun_errors);
+ ns->rx_missed_errors += le32_to_cpu(s->rx_resource_errors);
ns->rx_errors += le32_to_cpu(s->rx_crc_errors) +
le32_to_cpu(s->rx_alignment_errors) +
le32_to_cpu(s->rx_short_frame_errors) +
le32_to_cpu(s->tx_single_collisions);
nic->tx_multiple_collisions +=
le32_to_cpu(s->tx_multiple_collisions);
- if(nic->mac >= mac_82558_D101_A4) {
+ if (nic->mac >= mac_82558_D101_A4) {
nic->tx_fc_pause += le32_to_cpu(s->fc_xmt_pause);
nic->rx_fc_pause += le32_to_cpu(s->fc_rcv_pause);
nic->rx_fc_unsupported +=
le32_to_cpu(s->fc_rcv_unsupported);
- if(nic->mac >= mac_82559_D101M) {
+ if (nic->mac >= mac_82559_D101M) {
nic->tx_tco_frames +=
le16_to_cpu(s->xmt_tco_frames);
nic->rx_tco_frames +=
}
}
-
- if(e100_exec_cmd(nic, cuc_dump_reset, 0))
+
+ if (e100_exec_cmd(nic, cuc_dump_reset, 0))
DPRINTK(TX_ERR, DEBUG, "exec cuc_dump_reset failed\n");
}
/* Adjust inter-frame-spacing (IFS) between two transmits if
* we're getting collisions on a half-duplex connection. */
- if(duplex == DUPLEX_HALF) {
+ if (duplex == DUPLEX_HALF) {
u32 prev = nic->adaptive_ifs;
u32 min_frames = (speed == SPEED_100) ? 1000 : 100;
- if((nic->tx_frames / 32 < nic->tx_collisions) &&
+ if ((nic->tx_frames / 32 < nic->tx_collisions) &&
(nic->tx_frames > min_frames)) {
- if(nic->adaptive_ifs < 60)
+ if (nic->adaptive_ifs < 60)
nic->adaptive_ifs += 5;
} else if (nic->tx_frames < min_frames) {
- if(nic->adaptive_ifs >= 5)
+ if (nic->adaptive_ifs >= 5)
nic->adaptive_ifs -= 5;
}
- if(nic->adaptive_ifs != prev)
+ if (nic->adaptive_ifs != prev)
e100_exec_cb(nic, NULL, e100_configure);
}
}
mii_ethtool_gset(&nic->mii, &cmd);
- if(mii_link_ok(&nic->mii) && !netif_carrier_ok(nic->netdev)) {
- DPRINTK(LINK, INFO, "link up, %sMbps, %s-duplex\n",
- cmd.speed == SPEED_100 ? "100" : "10",
- cmd.duplex == DUPLEX_FULL ? "full" : "half");
- } else if(!mii_link_ok(&nic->mii) && netif_carrier_ok(nic->netdev)) {
- DPRINTK(LINK, INFO, "link down\n");
+ if (mii_link_ok(&nic->mii) && !netif_carrier_ok(nic->netdev)) {
+ printk(KERN_INFO "e100: %s NIC Link is Up %s Mbps %s Duplex\n",
+ nic->netdev->name,
+ cmd.speed == SPEED_100 ? "100" : "10",
+ cmd.duplex == DUPLEX_FULL ? "Full" : "Half");
+ } else if (!mii_link_ok(&nic->mii) && netif_carrier_ok(nic->netdev)) {
+ printk(KERN_INFO "e100: %s NIC Link is Down\n",
+ nic->netdev->name);
}
mii_check_link(&nic->mii);
/* Software generated interrupt to recover from (rare) Rx
- * allocation failure.
- * Unfortunately have to use a spinlock to not re-enable interrupts
- * accidentally, due to hardware that shares a register between the
- * interrupt mask bit and the SW Interrupt generation bit */
+ * allocation failure.
+ * Unfortunately have to use a spinlock to not re-enable interrupts
+ * accidentally, due to hardware that shares a register between the
+ * interrupt mask bit and the SW Interrupt generation bit */
spin_lock_irq(&nic->cmd_lock);
- writeb(readb(&nic->csr->scb.cmd_hi) | irq_sw_gen,&nic->csr->scb.cmd_hi);
- spin_unlock_irq(&nic->cmd_lock);
+ iowrite8(ioread8(&nic->csr->scb.cmd_hi) | irq_sw_gen,&nic->csr->scb.cmd_hi);
e100_write_flush(nic);
+ spin_unlock_irq(&nic->cmd_lock);
e100_update_stats(nic);
e100_adjust_adaptive_ifs(nic, cmd.speed, cmd.duplex);
- if(nic->mac <= mac_82557_D100_C)
+ if (nic->mac <= mac_82557_D100_C)
/* Issue a multicast command to workaround a 557 lock up */
e100_set_multicast_list(nic->netdev);
- if(nic->flags & ich && cmd.speed==SPEED_10 && cmd.duplex==DUPLEX_HALF)
+ if (nic->flags & ich && cmd.speed==SPEED_10 && cmd.duplex==DUPLEX_HALF)
/* Need SW workaround for ICH[x] 10Mbps/half duplex Tx hang. */
nic->flags |= ich_10h_workaround;
else
nic->flags &= ~ich_10h_workaround;
- mod_timer(&nic->watchdog, jiffies + E100_WATCHDOG_PERIOD);
+ mod_timer(&nic->watchdog,
+ round_jiffies(jiffies + E100_WATCHDOG_PERIOD));
}
-static inline void e100_xmit_prepare(struct nic *nic, struct cb *cb,
+static void e100_xmit_prepare(struct nic *nic, struct cb *cb,
struct sk_buff *skb)
{
cb->command = nic->tx_command;
/* interrupt every 16 packets regardless of delay */
- if((nic->cbs_avail & ~15) == nic->cbs_avail) cb->command |= cb_i;
+ if ((nic->cbs_avail & ~15) == nic->cbs_avail)
+ cb->command |= cpu_to_le16(cb_i);
cb->u.tcb.tbd_array = cb->dma_addr + offsetof(struct cb, u.tcb.tbd);
cb->u.tcb.tcb_byte_count = 0;
cb->u.tcb.threshold = nic->tx_threshold;
cb->u.tcb.tbd_count = 1;
cb->u.tcb.tbd.buf_addr = cpu_to_le32(pci_map_single(nic->pdev,
skb->data, skb->len, PCI_DMA_TODEVICE));
- // check for mapping failure?
+ /* check for mapping failure? */
cb->u.tcb.tbd.size = cpu_to_le16(skb->len);
}
struct nic *nic = netdev_priv(netdev);
int err;
- if(nic->flags & ich_10h_workaround) {
+ if (nic->flags & ich_10h_workaround) {
/* SW workaround for ICH[x] 10Mbps/half duplex Tx hang.
Issue a NOP command followed by a 1us delay before
issuing the Tx command. */
- if(e100_exec_cmd(nic, cuc_nop, 0))
+ if (e100_exec_cmd(nic, cuc_nop, 0))
DPRINTK(TX_ERR, DEBUG, "exec cuc_nop failed\n");
udelay(1);
}
err = e100_exec_cb(nic, skb, e100_xmit_prepare);
- switch(err) {
+ switch (err) {
case -ENOSPC:
/* We queued the skb, but now we're out of space. */
DPRINTK(TX_ERR, DEBUG, "No space for CB\n");
return 0;
}
-static inline int e100_tx_clean(struct nic *nic)
+static int e100_tx_clean(struct nic *nic)
{
+ struct net_device *dev = nic->netdev;
struct cb *cb;
int tx_cleaned = 0;
spin_lock(&nic->cb_lock);
- DPRINTK(TX_DONE, DEBUG, "cb->status = 0x%04X\n",
- nic->cb_to_clean->status);
-
/* Clean CBs marked complete */
- for(cb = nic->cb_to_clean;
+ for (cb = nic->cb_to_clean;
cb->status & cpu_to_le16(cb_complete);
cb = nic->cb_to_clean = cb->next) {
- if(likely(cb->skb != NULL)) {
- nic->net_stats.tx_packets++;
- nic->net_stats.tx_bytes += cb->skb->len;
+ DPRINTK(TX_DONE, DEBUG, "cb[%d]->status = 0x%04X\n",
+ (int)(((void*)cb - (void*)nic->cbs)/sizeof(struct cb)),
+ cb->status);
+
+ if (likely(cb->skb != NULL)) {
+ dev->stats.tx_packets++;
+ dev->stats.tx_bytes += cb->skb->len;
pci_unmap_single(nic->pdev,
le32_to_cpu(cb->u.tcb.tbd.buf_addr),
spin_unlock(&nic->cb_lock);
/* Recover from running out of Tx resources in xmit_frame */
- if(unlikely(tx_cleaned && netif_queue_stopped(nic->netdev)))
+ if (unlikely(tx_cleaned && netif_queue_stopped(nic->netdev)))
netif_wake_queue(nic->netdev);
return tx_cleaned;
static void e100_clean_cbs(struct nic *nic)
{
- if(nic->cbs) {
- while(nic->cbs_avail != nic->params.cbs.count) {
+ if (nic->cbs) {
+ while (nic->cbs_avail != nic->params.cbs.count) {
struct cb *cb = nic->cb_to_clean;
- if(cb->skb) {
+ if (cb->skb) {
pci_unmap_single(nic->pdev,
le32_to_cpu(cb->u.tcb.tbd.buf_addr),
le16_to_cpu(cb->u.tcb.tbd.size),
nic->cbs = pci_alloc_consistent(nic->pdev,
sizeof(struct cb) * count, &nic->cbs_dma_addr);
- if(!nic->cbs)
+ if (!nic->cbs)
return -ENOMEM;
- for(cb = nic->cbs, i = 0; i < count; cb++, i++) {
+ for (cb = nic->cbs, i = 0; i < count; cb++, i++) {
cb->next = (i + 1 < count) ? cb + 1 : nic->cbs;
cb->prev = (i == 0) ? nic->cbs + count - 1 : cb - 1;
static inline void e100_start_receiver(struct nic *nic, struct rx *rx)
{
- if(!nic->rxs) return;
- if(RU_SUSPENDED != nic->ru_running) return;
+ if (!nic->rxs) return;
+ if (RU_SUSPENDED != nic->ru_running) return;
/* handle init time starts */
- if(!rx) rx = nic->rxs;
+ if (!rx) rx = nic->rxs;
/* (Re)start RU if suspended or idle and RFA is non-NULL */
- if(rx->skb) {
+ if (rx->skb) {
e100_exec_cmd(nic, ruc_start, rx->dma_addr);
nic->ru_running = RU_RUNNING;
}
}
#define RFD_BUF_LEN (sizeof(struct rfd) + VLAN_ETH_FRAME_LEN)
-static inline int e100_rx_alloc_skb(struct nic *nic, struct rx *rx)
+static int e100_rx_alloc_skb(struct nic *nic, struct rx *rx)
{
- if(!(rx->skb = dev_alloc_skb(RFD_BUF_LEN + NET_IP_ALIGN)))
+ if (!(rx->skb = netdev_alloc_skb(nic->netdev, RFD_BUF_LEN + NET_IP_ALIGN)))
return -ENOMEM;
/* Align, init, and map the RFD. */
- rx->skb->dev = nic->netdev;
skb_reserve(rx->skb, NET_IP_ALIGN);
- memcpy(rx->skb->data, &nic->blank_rfd, sizeof(struct rfd));
+ skb_copy_to_linear_data(rx->skb, &nic->blank_rfd, sizeof(struct rfd));
rx->dma_addr = pci_map_single(nic->pdev, rx->skb->data,
RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
- if(pci_dma_mapping_error(rx->dma_addr)) {
+ if (pci_dma_mapping_error(nic->pdev, rx->dma_addr)) {
dev_kfree_skb_any(rx->skb);
- rx->skb = 0;
+ rx->skb = NULL;
rx->dma_addr = 0;
return -ENOMEM;
}
/* Link the RFD to end of RFA by linking previous RFD to
- * this one, and clearing EL bit of previous. */
- if(rx->prev->skb) {
+ * this one. We are safe to touch the previous RFD because
+ * it is protected by the before last buffer's el bit being set */
+ if (rx->prev->skb) {
struct rfd *prev_rfd = (struct rfd *)rx->prev->skb->data;
- put_unaligned(cpu_to_le32(rx->dma_addr),
- (u32 *)&prev_rfd->link);
- wmb();
- prev_rfd->command &= ~cpu_to_le16(cb_el);
+ put_unaligned_le32(rx->dma_addr, &prev_rfd->link);
pci_dma_sync_single_for_device(nic->pdev, rx->prev->dma_addr,
- sizeof(struct rfd), PCI_DMA_TODEVICE);
+ sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL);
}
return 0;
}
-static inline int e100_rx_indicate(struct nic *nic, struct rx *rx,
+static int e100_rx_indicate(struct nic *nic, struct rx *rx,
unsigned int *work_done, unsigned int work_to_do)
{
+ struct net_device *dev = nic->netdev;
struct sk_buff *skb = rx->skb;
struct rfd *rfd = (struct rfd *)skb->data;
u16 rfd_status, actual_size;
- if(unlikely(work_done && *work_done >= work_to_do))
+ if (unlikely(work_done && *work_done >= work_to_do))
return -EAGAIN;
/* Need to sync before taking a peek at cb_complete bit */
pci_dma_sync_single_for_cpu(nic->pdev, rx->dma_addr,
- sizeof(struct rfd), PCI_DMA_FROMDEVICE);
+ sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL);
rfd_status = le16_to_cpu(rfd->status);
DPRINTK(RX_STATUS, DEBUG, "status=0x%04X\n", rfd_status);
/* If data isn't ready, nothing to indicate */
- if(unlikely(!(rfd_status & cb_complete)))
+ if (unlikely(!(rfd_status & cb_complete))) {
+ /* If the next buffer has the el bit, but we think the receiver
+ * is still running, check to see if it really stopped while
+ * we had interrupts off.
+ * This allows for a fast restart without re-enabling
+ * interrupts */
+ if ((le16_to_cpu(rfd->command) & cb_el) &&
+ (RU_RUNNING == nic->ru_running))
+
+ if (ioread8(&nic->csr->scb.status) & rus_no_res)
+ nic->ru_running = RU_SUSPENDED;
return -ENODATA;
+ }
/* Get actual data size */
actual_size = le16_to_cpu(rfd->actual_size) & 0x3FFF;
- if(unlikely(actual_size > RFD_BUF_LEN - sizeof(struct rfd)))
+ if (unlikely(actual_size > RFD_BUF_LEN - sizeof(struct rfd)))
actual_size = RFD_BUF_LEN - sizeof(struct rfd);
/* Get data */
pci_unmap_single(nic->pdev, rx->dma_addr,
- RFD_BUF_LEN, PCI_DMA_FROMDEVICE);
+ RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
+
+ /* If this buffer has the el bit, but we think the receiver
+ * is still running, check to see if it really stopped while
+ * we had interrupts off.
+ * This allows for a fast restart without re-enabling interrupts.
+ * This can happen when the RU sees the size change but also sees
+ * the el bit set. */
+ if ((le16_to_cpu(rfd->command) & cb_el) &&
+ (RU_RUNNING == nic->ru_running)) {
- /* this allows for a fast restart without re-enabling interrupts */
- if(le16_to_cpu(rfd->command) & cb_el)
+ if (ioread8(&nic->csr->scb.status) & rus_no_res)
nic->ru_running = RU_SUSPENDED;
+ }
/* Pull off the RFD and put the actual data (minus eth hdr) */
skb_reserve(skb, sizeof(struct rfd));
skb_put(skb, actual_size);
skb->protocol = eth_type_trans(skb, nic->netdev);
- if(unlikely(!(rfd_status & cb_ok))) {
+ if (unlikely(!(rfd_status & cb_ok))) {
/* Don't indicate if hardware indicates errors */
- nic->net_stats.rx_dropped++;
dev_kfree_skb_any(skb);
- } else if(actual_size > nic->netdev->mtu + VLAN_ETH_HLEN) {
+ } else if (actual_size > ETH_DATA_LEN + VLAN_ETH_HLEN) {
/* Don't indicate oversized frames */
nic->rx_over_length_errors++;
- nic->net_stats.rx_dropped++;
dev_kfree_skb_any(skb);
} else {
- nic->net_stats.rx_packets++;
- nic->net_stats.rx_bytes += actual_size;
- nic->netdev->last_rx = jiffies;
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += actual_size;
netif_receive_skb(skb);
- if(work_done)
+ if (work_done)
(*work_done)++;
}
return 0;
}
-static inline void e100_rx_clean(struct nic *nic, unsigned int *work_done,
+static void e100_rx_clean(struct nic *nic, unsigned int *work_done,
unsigned int work_to_do)
{
struct rx *rx;
- int restart_required = 0;
- struct rx *rx_to_start = NULL;
-
- /* are we already rnr? then pay attention!!! this ensures that
- * the state machine progression never allows a start with a
- * partially cleaned list, avoiding a race between hardware
- * and rx_to_clean when in NAPI mode */
- if(RU_SUSPENDED == nic->ru_running)
- restart_required = 1;
+ int restart_required = 0, err = 0;
+ struct rx *old_before_last_rx, *new_before_last_rx;
+ struct rfd *old_before_last_rfd, *new_before_last_rfd;
/* Indicate newly arrived packets */
- for(rx = nic->rx_to_clean; rx->skb; rx = nic->rx_to_clean = rx->next) {
- int err = e100_rx_indicate(nic, rx, work_done, work_to_do);
- if(-EAGAIN == err) {
- /* hit quota so have more work to do, restart once
- * cleanup is complete */
- restart_required = 0;
+ for (rx = nic->rx_to_clean; rx->skb; rx = nic->rx_to_clean = rx->next) {
+ err = e100_rx_indicate(nic, rx, work_done, work_to_do);
+ /* Hit quota or no more to clean */
+ if (-EAGAIN == err || -ENODATA == err)
break;
- } else if(-ENODATA == err)
- break; /* No more to clean */
}
- /* save our starting point as the place we'll restart the receiver */
- if(restart_required)
- rx_to_start = nic->rx_to_clean;
+
+ /* On EAGAIN, hit quota so have more work to do, restart once
+ * cleanup is complete.
+ * Else, are we already rnr? then pay attention!!! this ensures that
+ * the state machine progression never allows a start with a
+ * partially cleaned list, avoiding a race between hardware
+ * and rx_to_clean when in NAPI mode */
+ if (-EAGAIN != err && RU_SUSPENDED == nic->ru_running)
+ restart_required = 1;
+
+ old_before_last_rx = nic->rx_to_use->prev->prev;
+ old_before_last_rfd = (struct rfd *)old_before_last_rx->skb->data;
/* Alloc new skbs to refill list */
- for(rx = nic->rx_to_use; !rx->skb; rx = nic->rx_to_use = rx->next) {
- if(unlikely(e100_rx_alloc_skb(nic, rx)))
+ for (rx = nic->rx_to_use; !rx->skb; rx = nic->rx_to_use = rx->next) {
+ if (unlikely(e100_rx_alloc_skb(nic, rx)))
break; /* Better luck next time (see watchdog) */
}
- if(restart_required) {
+ new_before_last_rx = nic->rx_to_use->prev->prev;
+ if (new_before_last_rx != old_before_last_rx) {
+ /* Set the el-bit on the buffer that is before the last buffer.
+ * This lets us update the next pointer on the last buffer
+ * without worrying about hardware touching it.
+ * We set the size to 0 to prevent hardware from touching this
+ * buffer.
+ * When the hardware hits the before last buffer with el-bit
+ * and size of 0, it will RNR interrupt, the RUS will go into
+ * the No Resources state. It will not complete nor write to
+ * this buffer. */
+ new_before_last_rfd =
+ (struct rfd *)new_before_last_rx->skb->data;
+ new_before_last_rfd->size = 0;
+ new_before_last_rfd->command |= cpu_to_le16(cb_el);
+ pci_dma_sync_single_for_device(nic->pdev,
+ new_before_last_rx->dma_addr, sizeof(struct rfd),
+ PCI_DMA_BIDIRECTIONAL);
+
+ /* Now that we have a new stopping point, we can clear the old
+ * stopping point. We must sync twice to get the proper
+ * ordering on the hardware side of things. */
+ old_before_last_rfd->command &= ~cpu_to_le16(cb_el);
+ pci_dma_sync_single_for_device(nic->pdev,
+ old_before_last_rx->dma_addr, sizeof(struct rfd),
+ PCI_DMA_BIDIRECTIONAL);
+ old_before_last_rfd->size = cpu_to_le16(VLAN_ETH_FRAME_LEN);
+ pci_dma_sync_single_for_device(nic->pdev,
+ old_before_last_rx->dma_addr, sizeof(struct rfd),
+ PCI_DMA_BIDIRECTIONAL);
+ }
+
+ if (restart_required) {
// ack the rnr?
- writeb(stat_ack_rnr, &nic->csr->scb.stat_ack);
- e100_start_receiver(nic, rx_to_start);
- if(work_done)
+ iowrite8(stat_ack_rnr, &nic->csr->scb.stat_ack);
+ e100_start_receiver(nic, nic->rx_to_clean);
+ if (work_done)
(*work_done)++;
}
}
nic->ru_running = RU_UNINITIALIZED;
- if(nic->rxs) {
- for(rx = nic->rxs, i = 0; i < count; rx++, i++) {
- if(rx->skb) {
+ if (nic->rxs) {
+ for (rx = nic->rxs, i = 0; i < count; rx++, i++) {
+ if (rx->skb) {
pci_unmap_single(nic->pdev, rx->dma_addr,
- RFD_BUF_LEN, PCI_DMA_FROMDEVICE);
+ RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
dev_kfree_skb(rx->skb);
}
}
{
struct rx *rx;
unsigned int i, count = nic->params.rfds.count;
+ struct rfd *before_last;
nic->rx_to_use = nic->rx_to_clean = NULL;
nic->ru_running = RU_UNINITIALIZED;
- if(!(nic->rxs = kmalloc(sizeof(struct rx) * count, GFP_ATOMIC)))
+ if (!(nic->rxs = kcalloc(count, sizeof(struct rx), GFP_ATOMIC)))
return -ENOMEM;
- memset(nic->rxs, 0, sizeof(struct rx) * count);
- for(rx = nic->rxs, i = 0; i < count; rx++, i++) {
+ for (rx = nic->rxs, i = 0; i < count; rx++, i++) {
rx->next = (i + 1 < count) ? rx + 1 : nic->rxs;
rx->prev = (i == 0) ? nic->rxs + count - 1 : rx - 1;
- if(e100_rx_alloc_skb(nic, rx)) {
+ if (e100_rx_alloc_skb(nic, rx)) {
e100_rx_clean_list(nic);
return -ENOMEM;
}
}
+ /* Set the el-bit on the buffer that is before the last buffer.
+ * This lets us update the next pointer on the last buffer without
+ * worrying about hardware touching it.
+ * We set the size to 0 to prevent hardware from touching this buffer.
+ * When the hardware hits the before last buffer with el-bit and size
+ * of 0, it will RNR interrupt, the RU will go into the No Resources
+ * state. It will not complete nor write to this buffer. */
+ rx = nic->rxs->prev->prev;
+ before_last = (struct rfd *)rx->skb->data;
+ before_last->command |= cpu_to_le16(cb_el);
+ before_last->size = 0;
+ pci_dma_sync_single_for_device(nic->pdev, rx->dma_addr,
+ sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL);
nic->rx_to_use = nic->rx_to_clean = nic->rxs;
nic->ru_running = RU_SUSPENDED;
return 0;
}
-static irqreturn_t e100_intr(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t e100_intr(int irq, void *dev_id)
{
struct net_device *netdev = dev_id;
struct nic *nic = netdev_priv(netdev);
- u8 stat_ack = readb(&nic->csr->scb.stat_ack);
+ u8 stat_ack = ioread8(&nic->csr->scb.stat_ack);
DPRINTK(INTR, DEBUG, "stat_ack = 0x%02X\n", stat_ack);
- if(stat_ack == stat_ack_not_ours || /* Not our interrupt */
+ if (stat_ack == stat_ack_not_ours || /* Not our interrupt */
stat_ack == stat_ack_not_present) /* Hardware is ejected */
return IRQ_NONE;
/* Ack interrupt(s) */
- writeb(stat_ack, &nic->csr->scb.stat_ack);
+ iowrite8(stat_ack, &nic->csr->scb.stat_ack);
/* We hit Receive No Resource (RNR); restart RU after cleaning */
- if(stat_ack & stat_ack_rnr)
+ if (stat_ack & stat_ack_rnr)
nic->ru_running = RU_SUSPENDED;
- e100_disable_irq(nic);
- netif_rx_schedule(netdev);
+ if (likely(netif_rx_schedule_prep(&nic->napi))) {
+ e100_disable_irq(nic);
+ __netif_rx_schedule(&nic->napi);
+ }
return IRQ_HANDLED;
}
-static int e100_poll(struct net_device *netdev, int *budget)
+static int e100_poll(struct napi_struct *napi, int budget)
{
- struct nic *nic = netdev_priv(netdev);
- unsigned int work_to_do = min(netdev->quota, *budget);
+ struct nic *nic = container_of(napi, struct nic, napi);
unsigned int work_done = 0;
- int tx_cleaned;
- e100_rx_clean(nic, &work_done, work_to_do);
- tx_cleaned = e100_tx_clean(nic);
+ e100_rx_clean(nic, &work_done, budget);
+ e100_tx_clean(nic);
- /* If no Rx and Tx cleanup work was done, exit polling mode. */
- if((!tx_cleaned && (work_done == 0)) || !netif_running(netdev)) {
- netif_rx_complete(netdev);
+ /* If budget not fully consumed, exit the polling mode */
+ if (work_done < budget) {
+ netif_rx_complete(napi);
e100_enable_irq(nic);
- return 0;
}
- *budget -= work_done;
- netdev->quota -= work_done;
-
- return 1;
+ return work_done;
}
#ifdef CONFIG_NET_POLL_CONTROLLER
static void e100_netpoll(struct net_device *netdev)
{
struct nic *nic = netdev_priv(netdev);
+
e100_disable_irq(nic);
- e100_intr(nic->pdev->irq, netdev, NULL);
+ e100_intr(nic->pdev->irq, netdev);
e100_tx_clean(nic);
e100_enable_irq(nic);
}
#endif
-static struct net_device_stats *e100_get_stats(struct net_device *netdev)
-{
- struct nic *nic = netdev_priv(netdev);
- return &nic->net_stats;
-}
-
static int e100_set_mac_address(struct net_device *netdev, void *p)
{
struct nic *nic = netdev_priv(netdev);
static int e100_change_mtu(struct net_device *netdev, int new_mtu)
{
- if(new_mtu < ETH_ZLEN || new_mtu > ETH_DATA_LEN)
+ if (new_mtu < ETH_ZLEN || new_mtu > ETH_DATA_LEN)
return -EINVAL;
netdev->mtu = new_mtu;
return 0;
}
-#ifdef CONFIG_PM
static int e100_asf(struct nic *nic)
{
/* ASF can be enabled from eeprom */
!(nic->eeprom[eeprom_config_asf] & eeprom_gcl) &&
((nic->eeprom[eeprom_smbus_addr] & 0xFF) != 0xFE));
}
-#endif
static int e100_up(struct nic *nic)
{
int err;
- if((err = e100_rx_alloc_list(nic)))
+ if ((err = e100_rx_alloc_list(nic)))
return err;
- if((err = e100_alloc_cbs(nic)))
+ if ((err = e100_alloc_cbs(nic)))
goto err_rx_clean_list;
- if((err = e100_hw_init(nic)))
+ if ((err = e100_hw_init(nic)))
goto err_clean_cbs;
e100_set_multicast_list(nic->netdev);
- e100_start_receiver(nic, 0);
+ e100_start_receiver(nic, NULL);
mod_timer(&nic->watchdog, jiffies);
- if((err = request_irq(nic->pdev->irq, e100_intr, SA_SHIRQ,
+ if ((err = request_irq(nic->pdev->irq, e100_intr, IRQF_SHARED,
nic->netdev->name, nic->netdev)))
goto err_no_irq;
netif_wake_queue(nic->netdev);
- netif_poll_enable(nic->netdev);
+ napi_enable(&nic->napi);
/* enable ints _after_ enabling poll, preventing a race between
* disable ints+schedule */
e100_enable_irq(nic);
static void e100_down(struct nic *nic)
{
/* wait here for poll to complete */
- netif_poll_disable(nic->netdev);
+ napi_disable(&nic->napi);
netif_stop_queue(nic->netdev);
e100_hw_reset(nic);
free_irq(nic->pdev->irq, nic->netdev);
{
struct nic *nic = netdev_priv(netdev);
- /* Reset outside of interrupt context, to avoid request_irq
+ /* Reset outside of interrupt context, to avoid request_irq
* in interrupt context */
schedule_work(&nic->tx_timeout_task);
}
-static void e100_tx_timeout_task(struct net_device *netdev)
+static void e100_tx_timeout_task(struct work_struct *work)
{
- struct nic *nic = netdev_priv(netdev);
+ struct nic *nic = container_of(work, struct nic, tx_timeout_task);
+ struct net_device *netdev = nic->netdev;
DPRINTK(TX_ERR, DEBUG, "scb.status=0x%02X\n",
- readb(&nic->csr->scb.status));
+ ioread8(&nic->csr->scb.status));
e100_down(netdev_priv(netdev));
e100_up(netdev_priv(netdev));
}
* in loopback mode, and the test passes if the received
* packet compares byte-for-byte to the transmitted packet. */
- if((err = e100_rx_alloc_list(nic)))
+ if ((err = e100_rx_alloc_list(nic)))
return err;
- if((err = e100_alloc_cbs(nic)))
+ if ((err = e100_alloc_cbs(nic)))
goto err_clean_rx;
/* ICH PHY loopback is broken so do MAC loopback instead */
- if(nic->flags & ich && loopback_mode == lb_phy)
+ if (nic->flags & ich && loopback_mode == lb_phy)
loopback_mode = lb_mac;
nic->loopback = loopback_mode;
- if((err = e100_hw_init(nic)))
+ if ((err = e100_hw_init(nic)))
goto err_loopback_none;
- if(loopback_mode == lb_phy)
+ if (loopback_mode == lb_phy)
mdio_write(nic->netdev, nic->mii.phy_id, MII_BMCR,
BMCR_LOOPBACK);
- e100_start_receiver(nic, 0);
+ e100_start_receiver(nic, NULL);
- if(!(skb = dev_alloc_skb(ETH_DATA_LEN))) {
+ if (!(skb = netdev_alloc_skb(nic->netdev, ETH_DATA_LEN))) {
err = -ENOMEM;
goto err_loopback_none;
}
msleep(10);
- if(memcmp(nic->rx_to_clean->skb->data + sizeof(struct rfd),
+ pci_dma_sync_single_for_cpu(nic->pdev, nic->rx_to_clean->dma_addr,
+ RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
+
+ if (memcmp(nic->rx_to_clean->skb->data + sizeof(struct rfd),
skb->data, ETH_DATA_LEN))
err = -EAGAIN;
err_loopback_none:
mdio_write(nic->netdev, nic->mii.phy_id, MII_BMCR, 0);
nic->loopback = lb_none;
- e100_hw_init(nic);
e100_clean_cbs(nic);
+ e100_hw_reset(nic);
err_clean_rx:
e100_rx_clean_list(nic);
return err;
strcpy(info->bus_info, pci_name(nic->pdev));
}
+#define E100_PHY_REGS 0x1C
static int e100_get_regs_len(struct net_device *netdev)
{
struct nic *nic = netdev_priv(netdev);
-#define E100_PHY_REGS 0x1C
-#define E100_REGS_LEN 1 + E100_PHY_REGS + \
- sizeof(nic->mem->dump_buf) / sizeof(u32)
- return E100_REGS_LEN * sizeof(u32);
+ return 1 + E100_PHY_REGS + sizeof(nic->mem->dump_buf);
}
static void e100_get_regs(struct net_device *netdev,
u32 *buff = p;
int i;
- regs->version = (1 << 24) | nic->rev_id;
- buff[0] = readb(&nic->csr->scb.cmd_hi) << 24 |
- readb(&nic->csr->scb.cmd_lo) << 16 |
- readw(&nic->csr->scb.status);
- for(i = E100_PHY_REGS; i >= 0; i--)
+ regs->version = (1 << 24) | nic->pdev->revision;
+ buff[0] = ioread8(&nic->csr->scb.cmd_hi) << 24 |
+ ioread8(&nic->csr->scb.cmd_lo) << 16 |
+ ioread16(&nic->csr->scb.status);
+ for (i = E100_PHY_REGS; i >= 0; i--)
buff[1 + E100_PHY_REGS - i] =
mdio_read(netdev, nic->mii.phy_id, i);
memset(nic->mem->dump_buf, 0, sizeof(nic->mem->dump_buf));
{
struct nic *nic = netdev_priv(netdev);
- if(wol->wolopts != WAKE_MAGIC && wol->wolopts != 0)
+ if ((wol->wolopts && wol->wolopts != WAKE_MAGIC) ||
+ !device_can_wakeup(&nic->pdev->dev))
return -EOPNOTSUPP;
- if(wol->wolopts)
+ if (wol->wolopts)
nic->flags |= wol_magic;
else
nic->flags &= ~wol_magic;
+ device_set_wakeup_enable(&nic->pdev->dev, wol->wolopts);
+
e100_exec_cb(nic, NULL, e100_configure);
return 0;
{
struct nic *nic = netdev_priv(netdev);
- if(eeprom->magic != E100_EEPROM_MAGIC)
+ if (eeprom->magic != E100_EEPROM_MAGIC)
return -EINVAL;
memcpy(&((u8 *)nic->eeprom)[eeprom->offset], bytes, eeprom->len);
struct param_range *rfds = &nic->params.rfds;
struct param_range *cbs = &nic->params.cbs;
- if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
+ if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
return -EINVAL;
- if(netif_running(netdev))
+ if (netif_running(netdev))
e100_down(nic);
rfds->count = max(ring->rx_pending, rfds->min);
rfds->count = min(rfds->count, rfds->max);
cbs->count = min(cbs->count, cbs->max);
DPRINTK(DRV, INFO, "Ring Param settings: rx: %d, tx %d\n",
rfds->count, cbs->count);
- if(netif_running(netdev))
+ if (netif_running(netdev))
e100_up(nic);
return 0;
"Mac loopback (offline)",
"Phy loopback (offline)",
};
-#define E100_TEST_LEN sizeof(e100_gstrings_test) / ETH_GSTRING_LEN
-
-static int e100_diag_test_count(struct net_device *netdev)
-{
- return E100_TEST_LEN;
-}
+#define E100_TEST_LEN ARRAY_SIZE(e100_gstrings_test)
static void e100_diag_test(struct net_device *netdev,
struct ethtool_test *test, u64 *data)
memset(data, 0, E100_TEST_LEN * sizeof(u64));
data[0] = !mii_link_ok(&nic->mii);
data[1] = e100_eeprom_load(nic);
- if(test->flags & ETH_TEST_FL_OFFLINE) {
+ if (test->flags & ETH_TEST_FL_OFFLINE) {
/* save speed, duplex & autoneg settings */
err = mii_ethtool_gset(&nic->mii, &cmd);
- if(netif_running(netdev))
+ if (netif_running(netdev))
e100_down(nic);
data[2] = e100_self_test(nic);
data[3] = e100_loopback_test(nic, lb_mac);
/* restore speed, duplex & autoneg settings */
err = mii_ethtool_sset(&nic->mii, &cmd);
- if(netif_running(netdev))
+ if (netif_running(netdev))
e100_up(nic);
}
- for(i = 0; i < E100_TEST_LEN; i++)
+ for (i = 0; i < E100_TEST_LEN; i++)
test->flags |= data[i] ? ETH_TEST_FL_FAILED : 0;
+
+ msleep_interruptible(4 * 1000);
}
static int e100_phys_id(struct net_device *netdev, u32 data)
{
struct nic *nic = netdev_priv(netdev);
- if(!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ))
+ if (!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ))
data = (u32)(MAX_SCHEDULE_TIMEOUT / HZ);
mod_timer(&nic->blink_timer, jiffies);
msleep_interruptible(data * 1000);
"rx_flow_control_unsupported", "tx_tco_packets", "rx_tco_packets",
};
#define E100_NET_STATS_LEN 21
-#define E100_STATS_LEN sizeof(e100_gstrings_stats) / ETH_GSTRING_LEN
+#define E100_STATS_LEN ARRAY_SIZE(e100_gstrings_stats)
-static int e100_get_stats_count(struct net_device *netdev)
+static int e100_get_sset_count(struct net_device *netdev, int sset)
{
- return E100_STATS_LEN;
+ switch (sset) {
+ case ETH_SS_TEST:
+ return E100_TEST_LEN;
+ case ETH_SS_STATS:
+ return E100_STATS_LEN;
+ default:
+ return -EOPNOTSUPP;
+ }
}
static void e100_get_ethtool_stats(struct net_device *netdev,
struct nic *nic = netdev_priv(netdev);
int i;
- for(i = 0; i < E100_NET_STATS_LEN; i++)
- data[i] = ((unsigned long *)&nic->net_stats)[i];
+ for (i = 0; i < E100_NET_STATS_LEN; i++)
+ data[i] = ((unsigned long *)&netdev->stats)[i];
data[i++] = nic->tx_deferred;
data[i++] = nic->tx_single_collisions;
static void e100_get_strings(struct net_device *netdev, u32 stringset, u8 *data)
{
- switch(stringset) {
+ switch (stringset) {
case ETH_SS_TEST:
memcpy(data, *e100_gstrings_test, sizeof(e100_gstrings_test));
break;
}
}
-static struct ethtool_ops e100_ethtool_ops = {
+static const struct ethtool_ops e100_ethtool_ops = {
.get_settings = e100_get_settings,
.set_settings = e100_set_settings,
.get_drvinfo = e100_get_drvinfo,
.set_eeprom = e100_set_eeprom,
.get_ringparam = e100_get_ringparam,
.set_ringparam = e100_set_ringparam,
- .self_test_count = e100_diag_test_count,
.self_test = e100_diag_test,
.get_strings = e100_get_strings,
.phys_id = e100_phys_id,
- .get_stats_count = e100_get_stats_count,
.get_ethtool_stats = e100_get_ethtool_stats,
+ .get_sset_count = e100_get_sset_count,
};
static int e100_do_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
static void e100_free(struct nic *nic)
{
- if(nic->mem) {
+ if (nic->mem) {
pci_free_consistent(nic->pdev, sizeof(struct mem),
nic->mem, nic->dma_addr);
nic->mem = NULL;
int err = 0;
netif_carrier_off(netdev);
- if((err = e100_up(nic)))
+ if ((err = e100_up(nic)))
DPRINTK(IFUP, ERR, "Cannot open interface, aborting.\n");
return err;
}
return 0;
}
+static const struct net_device_ops e100_netdev_ops = {
+ .ndo_open = e100_open,
+ .ndo_stop = e100_close,
+ .ndo_start_xmit = e100_xmit_frame,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_multicast_list = e100_set_multicast_list,
+ .ndo_set_mac_address = e100_set_mac_address,
+ .ndo_change_mtu = e100_change_mtu,
+ .ndo_do_ioctl = e100_do_ioctl,
+ .ndo_tx_timeout = e100_tx_timeout,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = e100_netpoll,
+#endif
+};
+
static int __devinit e100_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
struct nic *nic;
int err;
- if(!(netdev = alloc_etherdev(sizeof(struct nic)))) {
- if(((1 << debug) - 1) & NETIF_MSG_PROBE)
+ if (!(netdev = alloc_etherdev(sizeof(struct nic)))) {
+ if (((1 << debug) - 1) & NETIF_MSG_PROBE)
printk(KERN_ERR PFX "Etherdev alloc failed, abort.\n");
return -ENOMEM;
}
- netdev->open = e100_open;
- netdev->stop = e100_close;
- netdev->hard_start_xmit = e100_xmit_frame;
- netdev->get_stats = e100_get_stats;
- netdev->set_multicast_list = e100_set_multicast_list;
- netdev->set_mac_address = e100_set_mac_address;
- netdev->change_mtu = e100_change_mtu;
- netdev->do_ioctl = e100_do_ioctl;
+ netdev->netdev_ops = &e100_netdev_ops;
SET_ETHTOOL_OPS(netdev, &e100_ethtool_ops);
- netdev->tx_timeout = e100_tx_timeout;
netdev->watchdog_timeo = E100_WATCHDOG_PERIOD;
- netdev->poll = e100_poll;
- netdev->weight = E100_NAPI_WEIGHT;
-#ifdef CONFIG_NET_POLL_CONTROLLER
- netdev->poll_controller = e100_netpoll;
-#endif
- strcpy(netdev->name, pci_name(pdev));
+ strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
nic = netdev_priv(netdev);
+ netif_napi_add(netdev, &nic->napi, e100_poll, E100_NAPI_WEIGHT);
nic->netdev = netdev;
nic->pdev = pdev;
nic->msg_enable = (1 << debug) - 1;
pci_set_drvdata(pdev, netdev);
- if((err = pci_enable_device(pdev))) {
+ if ((err = pci_enable_device(pdev))) {
DPRINTK(PROBE, ERR, "Cannot enable PCI device, aborting.\n");
goto err_out_free_dev;
}
- if(!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
+ if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
DPRINTK(PROBE, ERR, "Cannot find proper PCI device "
"base address, aborting.\n");
err = -ENODEV;
goto err_out_disable_pdev;
}
- if((err = pci_request_regions(pdev, DRV_NAME))) {
+ if ((err = pci_request_regions(pdev, DRV_NAME))) {
DPRINTK(PROBE, ERR, "Cannot obtain PCI resources, aborting.\n");
goto err_out_disable_pdev;
}
- if((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK))) {
+ if ((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK))) {
DPRINTK(PROBE, ERR, "No usable DMA configuration, aborting.\n");
goto err_out_free_res;
}
- SET_MODULE_OWNER(netdev);
SET_NETDEV_DEV(netdev, &pdev->dev);
- nic->csr = ioremap(pci_resource_start(pdev, 0), sizeof(struct csr));
- if(!nic->csr) {
+ if (use_io)
+ DPRINTK(PROBE, INFO, "using i/o access mode\n");
+
+ nic->csr = pci_iomap(pdev, (use_io ? 1 : 0), sizeof(struct csr));
+ if (!nic->csr) {
DPRINTK(PROBE, ERR, "Cannot map device registers, aborting.\n");
err = -ENOMEM;
goto err_out_free_res;
}
- if(ent->driver_data)
+ if (ent->driver_data)
nic->flags |= ich;
else
nic->flags &= ~ich;
/* locks must be initialized before calling hw_reset */
spin_lock_init(&nic->cb_lock);
spin_lock_init(&nic->cmd_lock);
+ spin_lock_init(&nic->mdio_lock);
/* Reset the device before pci_set_master() in case device is in some
* funky state and has an interrupt pending - hint: we don't have the
nic->blink_timer.function = e100_blink_led;
nic->blink_timer.data = (unsigned long)nic;
- INIT_WORK(&nic->tx_timeout_task,
- (void (*)(void *))e100_tx_timeout_task, netdev);
+ INIT_WORK(&nic->tx_timeout_task, e100_tx_timeout_task);
- if((err = e100_alloc(nic))) {
+ if ((err = e100_alloc(nic))) {
DPRINTK(PROBE, ERR, "Cannot alloc driver memory, aborting.\n");
goto err_out_iounmap;
}
- e100_phy_init(nic);
-
- if((err = e100_eeprom_load(nic)))
+ if ((err = e100_eeprom_load(nic)))
goto err_out_free;
+ e100_phy_init(nic);
+
memcpy(netdev->dev_addr, nic->eeprom, ETH_ALEN);
- if(!is_valid_ether_addr(netdev->dev_addr)) {
- DPRINTK(PROBE, ERR, "Invalid MAC address from "
- "EEPROM, aborting.\n");
- err = -EAGAIN;
- goto err_out_free;
+ memcpy(netdev->perm_addr, nic->eeprom, ETH_ALEN);
+ if (!is_valid_ether_addr(netdev->perm_addr)) {
+ if (!eeprom_bad_csum_allow) {
+ DPRINTK(PROBE, ERR, "Invalid MAC address from "
+ "EEPROM, aborting.\n");
+ err = -EAGAIN;
+ goto err_out_free;
+ } else {
+ DPRINTK(PROBE, ERR, "Invalid MAC address from EEPROM, "
+ "you MUST configure one.\n");
+ }
}
/* Wol magic packet can be enabled from eeprom */
- if((nic->mac >= mac_82558_D101_A4) &&
- (nic->eeprom[eeprom_id] & eeprom_id_wol))
+ if ((nic->mac >= mac_82558_D101_A4) &&
+ (nic->eeprom[eeprom_id] & eeprom_id_wol)) {
nic->flags |= wol_magic;
+ device_set_wakeup_enable(&pdev->dev, true);
+ }
/* ack any pending wake events, disable PME */
- pci_enable_wake(pdev, 0, 0);
+ pci_pme_active(pdev, false);
strcpy(netdev->name, "eth%d");
- if((err = register_netdev(netdev))) {
+ if ((err = register_netdev(netdev))) {
DPRINTK(PROBE, ERR, "Cannot register net device, aborting.\n");
goto err_out_free;
}
- DPRINTK(PROBE, INFO, "addr 0x%lx, irq %d, "
- "MAC addr %02X:%02X:%02X:%02X:%02X:%02X\n",
- pci_resource_start(pdev, 0), pdev->irq,
- netdev->dev_addr[0], netdev->dev_addr[1], netdev->dev_addr[2],
- netdev->dev_addr[3], netdev->dev_addr[4], netdev->dev_addr[5]);
+ DPRINTK(PROBE, INFO, "addr 0x%llx, irq %d, MAC addr %pM\n",
+ (unsigned long long)pci_resource_start(pdev, use_io ? 1 : 0),
+ pdev->irq, netdev->dev_addr);
return 0;
err_out_free:
e100_free(nic);
err_out_iounmap:
- iounmap(nic->csr);
+ pci_iounmap(pdev, nic->csr);
err_out_free_res:
pci_release_regions(pdev);
err_out_disable_pdev:
{
struct net_device *netdev = pci_get_drvdata(pdev);
- if(netdev) {
+ if (netdev) {
struct nic *nic = netdev_priv(netdev);
unregister_netdev(netdev);
e100_free(nic);
- iounmap(nic->csr);
+ pci_iounmap(pdev, nic->csr);
free_netdev(netdev);
pci_release_regions(pdev);
pci_disable_device(pdev);
}
}
-#ifdef CONFIG_PM
static int e100_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct nic *nic = netdev_priv(netdev);
- if(netif_running(netdev))
+ if (netif_running(netdev))
e100_down(nic);
- e100_hw_reset(nic);
netif_device_detach(netdev);
pci_save_state(pdev);
- pci_enable_wake(pdev, pci_choose_state(pdev, state), nic->flags & (wol_magic | e100_asf(nic)));
+
+ if ((nic->flags & wol_magic) | e100_asf(nic)) {
+ if (pci_enable_wake(pdev, PCI_D3cold, true))
+ pci_enable_wake(pdev, PCI_D3hot, true);
+ } else {
+ pci_enable_wake(pdev, PCI_D3hot, false);
+ }
+
pci_disable_device(pdev);
- pci_set_power_state(pdev, pci_choose_state(pdev, state));
+ pci_set_power_state(pdev, PCI_D3hot);
return 0;
}
+#ifdef CONFIG_PM
static int e100_resume(struct pci_dev *pdev)
{
struct net_device *netdev = pci_get_drvdata(pdev);
pci_restore_state(pdev);
/* ack any pending wake events, disable PME */
pci_enable_wake(pdev, 0, 0);
- if(e100_hw_init(nic))
- DPRINTK(HW, ERR, "e100_hw_init failed\n");
netif_device_attach(netdev);
- if(netif_running(netdev))
+ if (netif_running(netdev))
e100_up(nic);
return 0;
}
-#endif
-
+#endif /* CONFIG_PM */
static void e100_shutdown(struct pci_dev *pdev)
{
+ e100_suspend(pdev, PMSG_SUSPEND);
+}
+
+/* ------------------ PCI Error Recovery infrastructure -------------- */
+/**
+ * e100_io_error_detected - called when PCI error is detected.
+ * @pdev: Pointer to PCI device
+ * @state: The current pci connection state
+ */
+static pci_ers_result_t e100_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
+{
struct net_device *netdev = pci_get_drvdata(pdev);
struct nic *nic = netdev_priv(netdev);
-#ifdef CONFIG_PM
- pci_enable_wake(pdev, 0, nic->flags & (wol_magic | e100_asf(nic)));
-#else
- pci_enable_wake(pdev, 0, nic->flags & (wol_magic));
-#endif
+ /* Similar to calling e100_down(), but avoids adapter I/O. */
+ e100_close(netdev);
+
+ /* Detach; put netif into a state similar to hotplug unplug. */
+ napi_enable(&nic->napi);
+ netif_device_detach(netdev);
+ pci_disable_device(pdev);
+
+ /* Request a slot reset. */
+ return PCI_ERS_RESULT_NEED_RESET;
}
+/**
+ * e100_io_slot_reset - called after the pci bus has been reset.
+ * @pdev: Pointer to PCI device
+ *
+ * Restart the card from scratch.
+ */
+static pci_ers_result_t e100_io_slot_reset(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct nic *nic = netdev_priv(netdev);
+
+ if (pci_enable_device(pdev)) {
+ printk(KERN_ERR "e100: Cannot re-enable PCI device after reset.\n");
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+ pci_set_master(pdev);
+
+ /* Only one device per card can do a reset */
+ if (0 != PCI_FUNC(pdev->devfn))
+ return PCI_ERS_RESULT_RECOVERED;
+ e100_hw_reset(nic);
+ e100_phy_init(nic);
+
+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * e100_io_resume - resume normal operations
+ * @pdev: Pointer to PCI device
+ *
+ * Resume normal operations after an error recovery
+ * sequence has been completed.
+ */
+static void e100_io_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct nic *nic = netdev_priv(netdev);
+
+ /* ack any pending wake events, disable PME */
+ pci_enable_wake(pdev, 0, 0);
+
+ netif_device_attach(netdev);
+ if (netif_running(netdev)) {
+ e100_open(netdev);
+ mod_timer(&nic->watchdog, jiffies);
+ }
+}
+
+static struct pci_error_handlers e100_err_handler = {
+ .error_detected = e100_io_error_detected,
+ .slot_reset = e100_io_slot_reset,
+ .resume = e100_io_resume,
+};
static struct pci_driver e100_driver = {
.name = DRV_NAME,
.probe = e100_probe,
.remove = __devexit_p(e100_remove),
#ifdef CONFIG_PM
+ /* Power Management hooks */
.suspend = e100_suspend,
.resume = e100_resume,
#endif
- .shutdown = e100_shutdown,
+ .shutdown = e100_shutdown,
+ .err_handler = &e100_err_handler,
};
static int __init e100_init_module(void)
{
- if(((1 << debug) - 1) & NETIF_MSG_DRV) {
+ if (((1 << debug) - 1) & NETIF_MSG_DRV) {
printk(KERN_INFO PFX "%s, %s\n", DRV_DESCRIPTION, DRV_VERSION);
printk(KERN_INFO PFX "%s\n", DRV_COPYRIGHT);
}
- return pci_module_init(&e100_driver);
+ return pci_register_driver(&e100_driver);
}
static void __exit e100_cleanup_module(void)
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff