blackfin: Fix tty compile error in PIO mode

[safe/jmp/linux-2.6] / drivers / net / de620.c

diff --git a/drivers/net/de620.c b/drivers/net/de620.c
index d454e14..d52f34c 100644 (file)
--- a/drivers/net/de620.c
+++ b/drivers/net/de620.c
@@ -686,7 +686,6 @@ static int de620_rx_intr(struct net_device *dev)
                        PRINTK(("Read %d bytes\n", size));
                        skb->protocol=eth_type_trans(skb,dev);
                        netif_rx(skb); /* deliver it "upstairs" */
-                       dev->last_rx = jiffies;
                        /* count all receives */
                        dev->stats.rx_packets++;
                        dev->stats.rx_bytes += size;
@@ -785,6 +784,17 @@ static int adapter_init(struct net_device *dev)
        return 0; /* all ok */
 }
 
+static const struct net_device_ops de620_netdev_ops = {
+       .ndo_open               = de620_open,
+       .ndo_stop               = de620_close,
+       .ndo_start_xmit         = de620_start_xmit,
+       .ndo_tx_timeout         = de620_timeout,
+       .ndo_set_multicast_list = de620_set_multicast_list,
+       .ndo_change_mtu         = eth_change_mtu,
+       .ndo_set_mac_address    = eth_mac_addr,
+       .ndo_validate_addr      = eth_validate_addr,
+};
+
 /******************************************************************************
  *
  * Only start-up code below
@@ -800,7 +810,6 @@ struct net_device * __init de620_probe(int unit)
        struct net_device *dev;
        int err = -ENOMEM;
        int i;
-       DECLARE_MAC_BUF(mac);
 
        dev = alloc_etherdev(0);
        if (!dev)
@@ -853,7 +862,7 @@ struct net_device * __init de620_probe(int unit)
                dev->broadcast[i] = 0xff;
        }
 
-       printk(", Ethernet Address: %s", print_mac(mac, dev->dev_addr));
+       printk(", Ethernet Address: %pM", dev->dev_addr);
 
        printk(" (%dk RAM,",
                (nic_data.RAM_Size) ? (nic_data.RAM_Size >> 2) : 64);
@@ -863,12 +872,8 @@ struct net_device * __init de620_probe(int unit)
        else
                printk(" UTP)\n");
 
-       dev->open               = de620_open;
-       dev->stop               = de620_close;
-       dev->hard_start_xmit    = de620_start_xmit;
-       dev->tx_timeout         = de620_timeout;
+       dev->netdev_ops = &de620_netdev_ops;
        dev->watchdog_timeo     = HZ*2;
-       dev->set_multicast_list = de620_set_multicast_list;
 
        /* base_addr and irq are already set, see above! */
 
@@ -876,10 +881,7 @@ struct net_device * __init de620_probe(int unit)
        if (de620_debug) {
                printk("\nEEPROM contents:\n");
                printk("RAM_Size = 0x%02X\n", nic_data.RAM_Size);
-               printk("NodeID = %02X:%02X:%02X:%02X:%02X:%02X\n",
-                       nic_data.NodeID[0], nic_data.NodeID[1],
-                       nic_data.NodeID[2], nic_data.NodeID[3],
-                       nic_data.NodeID[4], nic_data.NodeID[5]);
+               printk("NodeID = %pM\n", nic_data.NodeID);
                printk("Model = %d\n", nic_data.Model);
                printk("Media = %d\n", nic_data.Media);
                printk("SCR = 0x%02x\n", nic_data.SCR);
@@ -1008,20 +1010,3 @@ void cleanup_module(void)
 }
 #endif /* MODULE */
 MODULE_LICENSE("GPL");
-
-
-/*
- * (add '-DMODULE' when compiling as loadable module)
- *
- * compile-command:
- *     gcc -D__KERNEL__ -Wall -Wstrict-prototypes -O2 \
- *      -fomit-frame-pointer -m486 \
- *     -I/usr/src/linux/include -I../../net/inet -c de620.c
-*/
-/*
- * Local variables:
- *  kernel-compile-command: "gcc -D__KERNEL__ -Ilinux/include -I../../net/inet -Wall -Wstrict-prototypes -O2 -m486 -c de620.c"
- *  module-compile-command: "gcc -D__KERNEL__ -DMODULE -Ilinux/include -I../../net/inet -Wall -Wstrict-prototypes -O2 -m486 -c de620.c"
- *  compile-command: "gcc -D__KERNEL__ -DMODULE -Ilinux/include -I../../net/inet -Wall -Wstrict-prototypes -O2 -m486 -c de620.c"
- * End:
- */