{
if (dev->mc_count || dev->flags&(IFF_ALLMULTI|IFF_PROMISC))
{ /* Enable promiscuous mode */
- /*
- * We must make the kernel realise we had to move
- * into promisc mode or we start all out war on
- * the cable. - AC
- */
- dev->flags|=IFF_PROMISC;
-
de620_set_register(dev, W_TCR, (TCR_DEF & ~RXPBM) | RXALL);
}
else
PRINTK(("Read %d bytes\n", size));
skb->protocol=eth_type_trans(skb,dev);
netif_rx(skb); /* deliver it "upstairs" */
- dev->last_rx = jiffies;
/* count all receives */
dev->stats.rx_packets++;
dev->stats.rx_bytes += size;
return 0; /* all ok */
}
+static const struct net_device_ops de620_netdev_ops = {
+ .ndo_open = de620_open,
+ .ndo_stop = de620_close,
+ .ndo_start_xmit = de620_start_xmit,
+ .ndo_tx_timeout = de620_timeout,
+ .ndo_set_multicast_list = de620_set_multicast_list,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
/******************************************************************************
*
* Only start-up code below
struct net_device *dev;
int err = -ENOMEM;
int i;
- DECLARE_MAC_BUF(mac);
dev = alloc_etherdev(0);
if (!dev)
dev->broadcast[i] = 0xff;
}
- printk(", Ethernet Address: %s", print_mac(mac, dev->dev_addr));
+ printk(", Ethernet Address: %pM", dev->dev_addr);
printk(" (%dk RAM,",
(nic_data.RAM_Size) ? (nic_data.RAM_Size >> 2) : 64);
else
printk(" UTP)\n");
- dev->open = de620_open;
- dev->stop = de620_close;
- dev->hard_start_xmit = de620_start_xmit;
- dev->tx_timeout = de620_timeout;
+ dev->netdev_ops = &de620_netdev_ops;
dev->watchdog_timeo = HZ*2;
- dev->set_multicast_list = de620_set_multicast_list;
/* base_addr and irq are already set, see above! */
if (de620_debug) {
printk("\nEEPROM contents:\n");
printk("RAM_Size = 0x%02X\n", nic_data.RAM_Size);
- printk("NodeID = %02X:%02X:%02X:%02X:%02X:%02X\n",
- nic_data.NodeID[0], nic_data.NodeID[1],
- nic_data.NodeID[2], nic_data.NodeID[3],
- nic_data.NodeID[4], nic_data.NodeID[5]);
+ printk("NodeID = %pM\n", nic_data.NodeID);
printk("Model = %d\n", nic_data.Model);
printk("Media = %d\n", nic_data.Media);
printk("SCR = 0x%02x\n", nic_data.SCR);
}
#endif /* MODULE */
MODULE_LICENSE("GPL");
-
-
-/*
- * (add '-DMODULE' when compiling as loadable module)
- *
- * compile-command:
- * gcc -D__KERNEL__ -Wall -Wstrict-prototypes -O2 \
- * -fomit-frame-pointer -m486 \
- * -I/usr/src/linux/include -I../../net/inet -c de620.c
-*/
-/*
- * Local variables:
- * kernel-compile-command: "gcc -D__KERNEL__ -Ilinux/include -I../../net/inet -Wall -Wstrict-prototypes -O2 -m486 -c de620.c"
- * module-compile-command: "gcc -D__KERNEL__ -DMODULE -Ilinux/include -I../../net/inet -Wall -Wstrict-prototypes -O2 -m486 -c de620.c"
- * compile-command: "gcc -D__KERNEL__ -DMODULE -Ilinux/include -I../../net/inet -Wall -Wstrict-prototypes -O2 -m486 -c de620.c"
- * End:
- */