/* Add more time here if your adapter won't work OK: */
#define DE600_SLOW_DOWN udelay(delay_time)
- /*
- * If you still have trouble reading/writing to the adapter,
- * modify the following "#define": (see <asm/io.h> for more info)
-#define REALLY_SLOW_IO
- */
-#define SLOW_IO_BY_JUMPING /* Looks "better" than dummy write to port 0x80 :-) */
-
-/* use 0 for production, 1 for verification, >2 for debug */
-#ifdef DE600_DEBUG
-#define PRINTK(x) if (de600_debug >= 2) printk x
-#else
-#define DE600_DEBUG 0
-#define PRINTK(x) /**/
-#endif
-
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include "de600.h"
-static unsigned int de600_debug = DE600_DEBUG;
-module_param(de600_debug, int, 0);
-MODULE_PARM_DESC(de600_debug, "DE-600 debug level (0-2)");
-
static unsigned int check_lost = 1;
module_param(check_lost, bool, 0);
MODULE_PARM_DESC(check_lost, "If set then check for unplugged de600");
return 0;
}
-static struct net_device_stats *get_stats(struct net_device *dev)
-{
- return (struct net_device_stats *)(dev->priv);
-}
-
static inline void trigger_interrupt(struct net_device *dev)
{
de600_put_command(FLIP_IRQ);
if (free_tx_pages <= 0) { /* Do timeouts, to avoid hangs. */
tickssofar = jiffies - dev->trans_start;
if (tickssofar < 5)
- return 1;
+ return NETDEV_TX_BUSY;
/* else */
printk(KERN_WARNING "%s: transmit timed out (%d), %s?\n", dev->name, tickssofar, "network cable problem");
/* Restart the adapter. */
spin_lock_irqsave(&de600_lock, flags);
if (adapter_init(dev)) {
spin_unlock_irqrestore(&de600_lock, flags);
- return 1;
+ return NETDEV_TX_BUSY;
}
spin_unlock_irqrestore(&de600_lock, flags);
}
/* Start real output */
- PRINTK(("de600_start_xmit:len=%d, page %d/%d\n", skb->len, tx_fifo_in, free_tx_pages));
+ pr_debug("de600_start_xmit:len=%d, page %d/%d\n", skb->len, tx_fifo_in, free_tx_pages);
if ((len = skb->len) < RUNT)
len = RUNT;
if (was_down || (de600_read_byte(READ_DATA, dev) != 0xde)) {
if (adapter_init(dev)) {
spin_unlock_irqrestore(&de600_lock, flags);
- return 1;
+ return NETDEV_TX_BUSY;
}
}
}
* Handle the network interface interrupts.
*/
-static irqreturn_t de600_interrupt(int irq, void *dev_id, struct pt_regs * regs)
+static irqreturn_t de600_interrupt(int irq, void *dev_id)
{
struct net_device *dev = dev_id;
u8 irq_status;
int retrig = 0;
int boguscount = 0;
- /* This might just as well be deleted now, no crummy drivers present :-) */
- if ((dev == NULL) || (DE600_IRQ != irq)) {
- printk(KERN_ERR "%s: bogus interrupt %d\n", dev?dev->name:"DE-600", irq);
- return IRQ_NONE;
- }
-
spin_lock(&de600_lock);
select_nic();
irq_status = de600_read_status(dev);
do {
- PRINTK(("de600_interrupt (%02X)\n", irq_status));
+ pr_debug("de600_interrupt (%02X)\n", irq_status);
if (irq_status & RX_GOOD)
de600_rx_intr(dev);
if (!(irq_status & TX_FAILED16)) {
tx_fifo_out = (tx_fifo_out + 1) % TX_PAGES;
++free_tx_pages;
- ((struct net_device_stats *)(dev->priv))->tx_packets++;
+ dev->stats.tx_packets++;
netif_wake_queue(dev);
}
}
/* else */
- skb->dev = dev;
skb_reserve(skb,2); /* Align */
/* 'skb->data' points to the start of sk_buff data area. */
netif_rx(skb);
/* update stats */
- dev->last_rx = jiffies;
- ((struct net_device_stats *)(dev->priv))->rx_packets++; /* count all receives */
- ((struct net_device_stats *)(dev->priv))->rx_bytes += size; /* count all received bytes */
+ dev->stats.rx_packets++; /* count all receives */
+ dev->stats.rx_bytes += size; /* count all received bytes */
/*
* If any worth-while packets have been received, netif_rx()
*/
}
+static const struct net_device_ops de600_netdev_ops = {
+ .ndo_open = de600_open,
+ .ndo_stop = de600_close,
+ .ndo_start_xmit = de600_start_xmit,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
+
static struct net_device * __init de600_probe(void)
{
int i;
struct net_device *dev;
int err;
- dev = alloc_etherdev(sizeof(struct net_device_stats));
+ dev = alloc_etherdev(0);
if (!dev)
return ERR_PTR(-ENOMEM);
- SET_MODULE_OWNER(dev);
if (!request_region(DE600_IO, 3, "de600")) {
printk(KERN_WARNING "DE600: port 0x%x busy\n", DE600_IO);
printk(KERN_INFO "%s: D-Link DE-600 pocket adapter", dev->name);
/* Alpha testers must have the version number to report bugs. */
- if (de600_debug > 1)
- printk(version);
+ pr_debug("%s", version);
/* probe for adapter */
err = -ENODEV;
goto out1;
}
- printk(", Ethernet Address: %02X", dev->dev_addr[0]);
- for (i = 1; i < ETH_ALEN; i++)
- printk(":%02X",dev->dev_addr[i]);
- printk("\n");
-
- dev->get_stats = get_stats;
+ printk(", Ethernet Address: %pM\n", dev->dev_addr);
- dev->open = de600_open;
- dev->stop = de600_close;
- dev->hard_start_xmit = &de600_start_xmit;
+ dev->netdev_ops = &de600_netdev_ops;
dev->flags&=~IFF_MULTICAST;
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff