return 0;
}
if (--attempts == 0)
- return -EAGAIN;
+ return -EAGAIN;
if (delay)
udelay(delay);
}
static void mi1_init(struct adapter *adap, const struct adapter_info *ai)
{
u32 clkdiv = adap->params.vpd.cclk / (2 * adap->params.vpd.mdc) - 1;
- u32 val = F_PREEN | V_MDIINV(ai->mdiinv) | V_MDIEN(ai->mdien) |
- V_CLKDIV(clkdiv);
+ u32 val = F_PREEN | V_CLKDIV(clkdiv);
- if (!(ai->caps & SUPPORTED_10000baseT_Full))
- val |= V_ST(1);
t3_write_reg(adap, A_MI1_CFG, val);
}
-#define MDIO_ATTEMPTS 10
+#define MDIO_ATTEMPTS 20
/*
- * MI1 read/write operations for direct-addressed PHYs.
+ * MI1 read/write operations for clause 22 PHYs.
*/
-static int mi1_read(struct adapter *adapter, int phy_addr, int mmd_addr,
- int reg_addr, unsigned int *valp)
+static int t3_mi1_read(struct adapter *adapter, int phy_addr, int mmd_addr,
+ int reg_addr, unsigned int *valp)
{
int ret;
u32 addr = V_REGADDR(reg_addr) | V_PHYADDR(phy_addr);
return -EINVAL;
mutex_lock(&adapter->mdio_lock);
+ t3_set_reg_field(adapter, A_MI1_CFG, V_ST(M_ST), V_ST(1));
t3_write_reg(adapter, A_MI1_ADDR, addr);
t3_write_reg(adapter, A_MI1_OP, V_MDI_OP(2));
- ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0, MDIO_ATTEMPTS, 20);
+ ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0, MDIO_ATTEMPTS, 10);
if (!ret)
*valp = t3_read_reg(adapter, A_MI1_DATA);
mutex_unlock(&adapter->mdio_lock);
return ret;
}
-static int mi1_write(struct adapter *adapter, int phy_addr, int mmd_addr,
+static int t3_mi1_write(struct adapter *adapter, int phy_addr, int mmd_addr,
int reg_addr, unsigned int val)
{
int ret;
return -EINVAL;
mutex_lock(&adapter->mdio_lock);
+ t3_set_reg_field(adapter, A_MI1_CFG, V_ST(M_ST), V_ST(1));
t3_write_reg(adapter, A_MI1_ADDR, addr);
t3_write_reg(adapter, A_MI1_DATA, val);
t3_write_reg(adapter, A_MI1_OP, V_MDI_OP(1));
- ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0, MDIO_ATTEMPTS, 20);
+ ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0, MDIO_ATTEMPTS, 10);
mutex_unlock(&adapter->mdio_lock);
return ret;
}
static const struct mdio_ops mi1_mdio_ops = {
- mi1_read,
- mi1_write
+ t3_mi1_read,
+ t3_mi1_write
};
/*
+ * Performs the address cycle for clause 45 PHYs.
+ * Must be called with the MDIO_LOCK held.
+ */
+static int mi1_wr_addr(struct adapter *adapter, int phy_addr, int mmd_addr,
+ int reg_addr)
+{
+ u32 addr = V_REGADDR(mmd_addr) | V_PHYADDR(phy_addr);
+
+ t3_set_reg_field(adapter, A_MI1_CFG, V_ST(M_ST), 0);
+ t3_write_reg(adapter, A_MI1_ADDR, addr);
+ t3_write_reg(adapter, A_MI1_DATA, reg_addr);
+ t3_write_reg(adapter, A_MI1_OP, V_MDI_OP(0));
+ return t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0,
+ MDIO_ATTEMPTS, 10);
+}
+
+/*
* MI1 read/write operations for indirect-addressed PHYs.
*/
static int mi1_ext_read(struct adapter *adapter, int phy_addr, int mmd_addr,
int reg_addr, unsigned int *valp)
{
int ret;
- u32 addr = V_REGADDR(mmd_addr) | V_PHYADDR(phy_addr);
mutex_lock(&adapter->mdio_lock);
- t3_write_reg(adapter, A_MI1_ADDR, addr);
- t3_write_reg(adapter, A_MI1_DATA, reg_addr);
- t3_write_reg(adapter, A_MI1_OP, V_MDI_OP(0));
- ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0, MDIO_ATTEMPTS, 20);
+ ret = mi1_wr_addr(adapter, phy_addr, mmd_addr, reg_addr);
if (!ret) {
t3_write_reg(adapter, A_MI1_OP, V_MDI_OP(3));
ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0,
- MDIO_ATTEMPTS, 20);
+ MDIO_ATTEMPTS, 10);
if (!ret)
*valp = t3_read_reg(adapter, A_MI1_DATA);
}
int reg_addr, unsigned int val)
{
int ret;
- u32 addr = V_REGADDR(mmd_addr) | V_PHYADDR(phy_addr);
mutex_lock(&adapter->mdio_lock);
- t3_write_reg(adapter, A_MI1_ADDR, addr);
- t3_write_reg(adapter, A_MI1_DATA, reg_addr);
- t3_write_reg(adapter, A_MI1_OP, V_MDI_OP(0));
- ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0, MDIO_ATTEMPTS, 20);
+ ret = mi1_wr_addr(adapter, phy_addr, mmd_addr, reg_addr);
if (!ret) {
t3_write_reg(adapter, A_MI1_DATA, val);
t3_write_reg(adapter, A_MI1_OP, V_MDI_OP(1));
ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0,
- MDIO_ATTEMPTS, 20);
+ MDIO_ATTEMPTS, 10);
}
mutex_unlock(&adapter->mdio_lock);
return ret;
return mdio_write(phy, 0, MII_BMCR, ctl);
}
+int t3_phy_lasi_intr_enable(struct cphy *phy)
+{
+ return mdio_write(phy, MDIO_DEV_PMA_PMD, LASI_CTRL, 1);
+}
+
+int t3_phy_lasi_intr_disable(struct cphy *phy)
+{
+ return mdio_write(phy, MDIO_DEV_PMA_PMD, LASI_CTRL, 0);
+}
+
+int t3_phy_lasi_intr_clear(struct cphy *phy)
+{
+ u32 val;
+
+ return mdio_read(phy, MDIO_DEV_PMA_PMD, LASI_STAT, &val);
+}
+
+int t3_phy_lasi_intr_handler(struct cphy *phy)
+{
+ unsigned int status;
+ int err = mdio_read(phy, MDIO_DEV_PMA_PMD, LASI_STAT, &status);
+
+ if (err)
+ return err;
+ return (status & 1) ? cphy_cause_link_change : 0;
+}
+
static const struct adapter_info t3_adap_info[] = {
- {2, 0, 0, 0,
+ {2, 0,
F_GPIO2_OEN | F_GPIO4_OEN |
- F_GPIO2_OUT_VAL | F_GPIO4_OUT_VAL, F_GPIO3 | F_GPIO5,
- 0,
+ F_GPIO2_OUT_VAL | F_GPIO4_OUT_VAL, { S_GPIO3, S_GPIO5 }, 0,
&mi1_mdio_ops, "Chelsio PE9000"},
- {2, 0, 0, 0,
+ {2, 0,
F_GPIO2_OEN | F_GPIO4_OEN |
- F_GPIO2_OUT_VAL | F_GPIO4_OUT_VAL, F_GPIO3 | F_GPIO5,
- 0,
+ F_GPIO2_OUT_VAL | F_GPIO4_OUT_VAL, { S_GPIO3, S_GPIO5 }, 0,
&mi1_mdio_ops, "Chelsio T302"},
- {1, 0, 0, 0,
+ {1, 0,
F_GPIO1_OEN | F_GPIO6_OEN | F_GPIO7_OEN | F_GPIO10_OEN |
F_GPIO11_OEN | F_GPIO1_OUT_VAL | F_GPIO6_OUT_VAL | F_GPIO10_OUT_VAL,
- 0, SUPPORTED_10000baseT_Full | SUPPORTED_AUI,
+ { 0 }, SUPPORTED_10000baseT_Full | SUPPORTED_AUI,
&mi1_mdio_ext_ops, "Chelsio T310"},
- {2, 0, 0, 0,
+ {2, 0,
F_GPIO1_OEN | F_GPIO2_OEN | F_GPIO4_OEN | F_GPIO5_OEN | F_GPIO6_OEN |
F_GPIO7_OEN | F_GPIO10_OEN | F_GPIO11_OEN | F_GPIO1_OUT_VAL |
- F_GPIO5_OUT_VAL | F_GPIO6_OUT_VAL | F_GPIO10_OUT_VAL, 0,
- SUPPORTED_10000baseT_Full | SUPPORTED_AUI,
+ F_GPIO5_OUT_VAL | F_GPIO6_OUT_VAL | F_GPIO10_OUT_VAL,
+ { S_GPIO9, S_GPIO3 }, SUPPORTED_10000baseT_Full | SUPPORTED_AUI,
&mi1_mdio_ext_ops, "Chelsio T320"},
};
return id < ARRAY_SIZE(t3_adap_info) ? &t3_adap_info[id] : NULL;
}
-#define CAPS_1G (SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Full | \
- SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg | SUPPORTED_MII)
-#define CAPS_10G (SUPPORTED_10000baseT_Full | SUPPORTED_AUI)
+struct port_type_info {
+ int (*phy_prep)(struct cphy *phy, struct adapter *adapter,
+ int phy_addr, const struct mdio_ops *ops);
+};
static const struct port_type_info port_types[] = {
- {NULL},
- {t3_ael1002_phy_prep, CAPS_10G | SUPPORTED_FIBRE,
- "10GBASE-XR"},
- {t3_vsc8211_phy_prep, CAPS_1G | SUPPORTED_TP | SUPPORTED_IRQ,
- "10/100/1000BASE-T"},
- {NULL, CAPS_1G | SUPPORTED_TP | SUPPORTED_IRQ,
- "10/100/1000BASE-T"},
- {t3_xaui_direct_phy_prep, CAPS_10G | SUPPORTED_TP, "10GBASE-CX4"},
- {NULL, CAPS_10G, "10GBASE-KX4"},
- {t3_qt2045_phy_prep, CAPS_10G | SUPPORTED_TP, "10GBASE-CX4"},
- {t3_ael1006_phy_prep, CAPS_10G | SUPPORTED_FIBRE,
- "10GBASE-SR"},
- {NULL, CAPS_10G | SUPPORTED_TP, "10GBASE-CX4"},
+ { NULL },
+ { t3_ael1002_phy_prep },
+ { t3_vsc8211_phy_prep },
+ { NULL},
+ { t3_xaui_direct_phy_prep },
+ { NULL },
+ { t3_qt2045_phy_prep },
+ { t3_ael1006_phy_prep },
+ { NULL },
};
-#undef CAPS_1G
-#undef CAPS_10G
-
#define VPD_ENTRY(name, len) \
u8 name##_kword[2]; u8 name##_len; u8 name##_data[len]
* addres is written to the control register. The hardware device will
* set the flag to 1 when 4 bytes have been read into the data register.
*/
-int t3_seeprom_read(struct adapter *adapter, u32 addr, u32 *data)
+int t3_seeprom_read(struct adapter *adapter, u32 addr, __le32 *data)
{
u16 val;
int attempts = EEPROM_MAX_POLL;
+ u32 v;
unsigned int base = adapter->params.pci.vpd_cap_addr;
if ((addr >= EEPROMSIZE && addr != EEPROM_STAT_ADDR) || (addr & 3))
CH_ERR(adapter, "reading EEPROM address 0x%x failed\n", addr);
return -EIO;
}
- pci_read_config_dword(adapter->pdev, base + PCI_VPD_DATA, data);
- *data = le32_to_cpu(*data);
+ pci_read_config_dword(adapter->pdev, base + PCI_VPD_DATA, &v);
+ *data = cpu_to_le32(v);
return 0;
}
* Write a 32-bit word to a location in VPD EEPROM using the card's PCI
* VPD ROM capability.
*/
-int t3_seeprom_write(struct adapter *adapter, u32 addr, u32 data)
+int t3_seeprom_write(struct adapter *adapter, u32 addr, __le32 data)
{
u16 val;
int attempts = EEPROM_MAX_POLL;
return -EINVAL;
pci_write_config_dword(adapter->pdev, base + PCI_VPD_DATA,
- cpu_to_le32(data));
+ le32_to_cpu(data));
pci_write_config_word(adapter->pdev,base + PCI_VPD_ADDR,
addr | PCI_VPD_ADDR_F);
do {
* Card information is normally at VPD_BASE but some early cards had
* it at 0.
*/
- ret = t3_seeprom_read(adapter, VPD_BASE, (u32 *)&vpd);
+ ret = t3_seeprom_read(adapter, VPD_BASE, (__le32 *)&vpd);
if (ret)
return ret;
addr = vpd.id_tag == 0x82 ? VPD_BASE : 0;
for (i = 0; i < sizeof(vpd); i += 4) {
ret = t3_seeprom_read(adapter, addr + i,
- (u32 *)((u8 *)&vpd + i));
+ (__le32 *)((u8 *)&vpd + i));
if (ret)
return ret;
}
SF_ERASE_SECTOR = 0xd8, /* erase sector */
FW_FLASH_BOOT_ADDR = 0x70000, /* start address of FW in flash */
- FW_VERS_ADDR = 0x77ffc, /* flash address holding FW version */
+ FW_VERS_ADDR = 0x7fffc, /* flash address holding FW version */
FW_MIN_SIZE = 8 /* at least version and csum */
};
1, 1, 5, 1);
if (ret)
return ret;
-
+
*vers = t3_read_reg(adapter, A_TP_EMBED_OP_FIELD1);
return 0;
major = G_TP_VERSION_MAJOR(vers);
minor = G_TP_VERSION_MINOR(vers);
- if (major == TP_VERSION_MAJOR && minor == TP_VERSION_MINOR)
+ if (major == TP_VERSION_MAJOR && minor == TP_VERSION_MINOR)
return 0;
if (major != TP_VERSION_MAJOR)
}
/**
- * t3_check_tpsram - check if provided protocol SRAM
+ * t3_check_tpsram - check if provided protocol SRAM
* is compatible with this driver
* @adapter: the adapter
* @tp_sram: the firmware image to write
* Checks if an adapter's tp sram is compatible with the driver.
* Returns 0 if the versions are compatible, a negative error otherwise.
*/
-int t3_check_tpsram(struct adapter *adapter, u8 *tp_sram, unsigned int size)
+int t3_check_tpsram(struct adapter *adapter, const u8 *tp_sram,
+ unsigned int size)
{
u32 csum;
unsigned int i;
- const u32 *p = (const u32 *)tp_sram;
+ const __be32 *p = (const __be32 *)tp_sram;
/* Verify checksum */
for (csum = 0, i = 0; i < size / sizeof(csum); i++)
{
u32 csum;
unsigned int i;
- const u32 *p = (const u32 *)fw_data;
+ const __be32 *p = (const __be32 *)fw_data;
int ret, addr, fw_sector = FW_FLASH_BOOT_ADDR >> 16;
if ((size & 3) || size < FW_MIN_SIZE)
phy->ops->get_link_status(phy, &link_ok, &speed, &duplex, &fc);
+ if (lc->requested_fc & PAUSE_AUTONEG)
+ fc &= lc->requested_fc;
+ else
+ fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX);
+
+ if (link_ok == lc->link_ok && speed == lc->speed &&
+ duplex == lc->duplex && fc == lc->fc)
+ return; /* nothing changed */
+
if (link_ok != lc->link_ok && adapter->params.rev > 0 &&
uses_xaui(adapter)) {
if (link_ok)
lc->link_ok = link_ok;
lc->speed = speed < 0 ? SPEED_INVALID : speed;
lc->duplex = duplex < 0 ? DUPLEX_INVALID : duplex;
- if (lc->requested_fc & PAUSE_AUTONEG)
- fc &= lc->requested_fc;
- else
- fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX);
if (link_ok && speed >= 0 && lc->autoneg == AUTONEG_ENABLE) {
/* Set MAC speed, duplex, and flow control to match PHY. */
fc);
/* Also disables autoneg */
phy->ops->set_speed_duplex(phy, lc->speed, lc->duplex);
- phy->ops->reset(phy, 0);
} else
phy->ops->autoneg_enable(phy);
} else {
unsigned int mask; /* bits to check in interrupt status */
const char *msg; /* message to print or NULL */
short stat_idx; /* stat counter to increment or -1 */
- unsigned short fatal:1; /* whether the condition reported is fatal */
+ unsigned short fatal; /* whether the condition reported is fatal */
};
/**
return fatal;
}
-#define SGE_INTR_MASK (F_RSPQDISABLED)
+#define SGE_INTR_MASK (F_RSPQDISABLED | \
+ F_UC_REQ_FRAMINGERROR | F_R_REQ_FRAMINGERROR | \
+ F_CPPARITYERROR | F_OCPARITYERROR | F_RCPARITYERROR | \
+ F_IRPARITYERROR | V_ITPARITYERROR(M_ITPARITYERROR) | \
+ V_FLPARITYERROR(M_FLPARITYERROR) | F_LODRBPARITYERROR | \
+ F_HIDRBPARITYERROR | F_LORCQPARITYERROR | \
+ F_HIRCQPARITYERROR)
#define MC5_INTR_MASK (F_PARITYERR | F_ACTRGNFULL | F_UNKNOWNCMD | \
F_REQQPARERR | F_DISPQPARERR | F_DELACTEMPTY | \
F_NFASRCHFAIL)
#define PCIE_INTR_MASK (F_UNXSPLCPLERRR | F_UNXSPLCPLERRC | F_PCIE_PIOPARERR |\
F_PCIE_WFPARERR | F_PCIE_RFPARERR | F_PCIE_CFPARERR | \
/* V_PCIE_MSIXPARERR(M_PCIE_MSIXPARERR) | */ \
- V_BISTERR(M_BISTERR) | F_PEXERR)
-#define ULPRX_INTR_MASK F_PARERR
-#define ULPTX_INTR_MASK 0
-#define CPLSW_INTR_MASK (F_TP_FRAMING_ERROR | \
+ F_RETRYBUFPARERR | F_RETRYLUTPARERR | F_RXPARERR | \
+ F_TXPARERR | V_BISTERR(M_BISTERR))
+#define ULPRX_INTR_MASK (F_PARERRDATA | F_PARERRPCMD | F_ARBPF1PERR | \
+ F_ARBPF0PERR | F_ARBFPERR | F_PCMDMUXPERR | \
+ F_DATASELFRAMEERR1 | F_DATASELFRAMEERR0)
+#define ULPTX_INTR_MASK 0xfc
+#define CPLSW_INTR_MASK (F_CIM_OP_MAP_PERR | F_TP_FRAMING_ERROR | \
F_SGE_FRAMING_ERROR | F_CIM_FRAMING_ERROR | \
F_ZERO_SWITCH_ERROR)
#define CIM_INTR_MASK (F_BLKWRPLINT | F_BLKRDPLINT | F_BLKWRCTLINT | \
F_BLKRDCTLINT | F_BLKWRFLASHINT | F_BLKRDFLASHINT | \
F_SGLWRFLASHINT | F_WRBLKFLASHINT | F_BLKWRBOOTINT | \
- F_FLASHRANGEINT | F_SDRAMRANGEINT | F_RSVDSPACEINT)
+ F_FLASHRANGEINT | F_SDRAMRANGEINT | F_RSVDSPACEINT | \
+ F_DRAMPARERR | F_ICACHEPARERR | F_DCACHEPARERR | \
+ F_OBQSGEPARERR | F_OBQULPHIPARERR | F_OBQULPLOPARERR | \
+ F_IBQSGELOPARERR | F_IBQSGEHIPARERR | F_IBQULPPARERR | \
+ F_IBQTPPARERR | F_ITAGPARERR | F_DTAGPARERR)
#define PMTX_INTR_MASK (F_ZERO_C_CMD_ERROR | ICSPI_FRM_ERR | OESPI_FRM_ERR | \
V_ICSPI_PAR_ERROR(M_ICSPI_PAR_ERROR) | \
V_OESPI_PAR_ERROR(M_OESPI_PAR_ERROR))
{F_PCIE_CFPARERR, "PCI command FIFO parity error", -1, 1},
{V_PCIE_MSIXPARERR(M_PCIE_MSIXPARERR),
"PCI MSI-X table/PBA parity error", -1, 1},
+ {F_RETRYBUFPARERR, "PCI retry buffer parity error", -1, 1},
+ {F_RETRYLUTPARERR, "PCI retry LUT parity error", -1, 1},
+ {F_RXPARERR, "PCI Rx parity error", -1, 1},
+ {F_TXPARERR, "PCI Tx parity error", -1, 1},
{V_BISTERR(M_BISTERR), "PCI BIST error", -1, 1},
{0}
};
{0}
};
+ static struct intr_info tp_intr_info_t3c[] = {
+ {0x1fffffff, "TP parity error", -1, 1},
+ {F_FLMRXFLSTEMPTY, "TP out of Rx pages", -1, 1},
+ {F_FLMTXFLSTEMPTY, "TP out of Tx pages", -1, 1},
+ {0}
+ };
+
if (t3_handle_intr_status(adapter, A_TP_INT_CAUSE, 0xffffffff,
- tp_intr_info, NULL))
+ adapter->params.rev < T3_REV_C ?
+ tp_intr_info : tp_intr_info_t3c, NULL))
t3_fatal_err(adapter);
}
{F_BLKWRCTLINT, "CIM block write to CTL space", -1, 1},
{F_BLKRDPLINT, "CIM block read from PL space", -1, 1},
{F_BLKWRPLINT, "CIM block write to PL space", -1, 1},
+ {F_DRAMPARERR, "CIM DRAM parity error", -1, 1},
+ {F_ICACHEPARERR, "CIM icache parity error", -1, 1},
+ {F_DCACHEPARERR, "CIM dcache parity error", -1, 1},
+ {F_OBQSGEPARERR, "CIM OBQ SGE parity error", -1, 1},
+ {F_OBQULPHIPARERR, "CIM OBQ ULPHI parity error", -1, 1},
+ {F_OBQULPLOPARERR, "CIM OBQ ULPLO parity error", -1, 1},
+ {F_IBQSGELOPARERR, "CIM IBQ SGELO parity error", -1, 1},
+ {F_IBQSGEHIPARERR, "CIM IBQ SGEHI parity error", -1, 1},
+ {F_IBQULPPARERR, "CIM IBQ ULP parity error", -1, 1},
+ {F_IBQTPPARERR, "CIM IBQ TP parity error", -1, 1},
+ {F_ITAGPARERR, "CIM itag parity error", -1, 1},
+ {F_DTAGPARERR, "CIM dtag parity error", -1, 1},
{0}
};
static void ulprx_intr_handler(struct adapter *adapter)
{
static const struct intr_info ulprx_intr_info[] = {
- {F_PARERR, "ULP RX parity error", -1, 1},
+ {F_PARERRDATA, "ULP RX data parity error", -1, 1},
+ {F_PARERRPCMD, "ULP RX command parity error", -1, 1},
+ {F_ARBPF1PERR, "ULP RX ArbPF1 parity error", -1, 1},
+ {F_ARBPF0PERR, "ULP RX ArbPF0 parity error", -1, 1},
+ {F_ARBFPERR, "ULP RX ArbF parity error", -1, 1},
+ {F_PCMDMUXPERR, "ULP RX PCMDMUX parity error", -1, 1},
+ {F_DATASELFRAMEERR1, "ULP RX frame error", -1, 1},
+ {F_DATASELFRAMEERR0, "ULP RX frame error", -1, 1},
{0}
};
STAT_ULP_CH0_PBL_OOB, 0},
{F_PBL_BOUND_ERR_CH1, "ULP TX channel 1 PBL out of bounds",
STAT_ULP_CH1_PBL_OOB, 0},
+ {0xfc, "ULP TX parity error", -1, 1},
{0}
};
static void cplsw_intr_handler(struct adapter *adapter)
{
static const struct intr_info cplsw_intr_info[] = {
-/* { F_CIM_OVFL_ERROR, "CPL switch CIM overflow", -1, 1 }, */
+ {F_CIM_OP_MAP_PERR, "CPL switch CIM parity error", -1, 1},
+ {F_CIM_OVFL_ERROR, "CPL switch CIM overflow", -1, 1},
{F_TP_FRAMING_ERROR, "CPL switch TP framing error", -1, 1},
{F_SGE_FRAMING_ERROR, "CPL switch SGE framing error", -1, 1},
{F_CIM_FRAMING_ERROR, "CPL switch CIM framing error", -1, 1},
*/
int t3_phy_intr_handler(struct adapter *adapter)
{
- u32 mask, gpi = adapter_info(adapter)->gpio_intr;
u32 i, cause = t3_read_reg(adapter, A_T3DBG_INT_CAUSE);
for_each_port(adapter, i) {
struct port_info *p = adap2pinfo(adapter, i);
- mask = gpi - (gpi & (gpi - 1));
- gpi -= mask;
-
- if (!(p->port_type->caps & SUPPORTED_IRQ))
+ if (!(p->phy.caps & SUPPORTED_IRQ))
continue;
- if (cause & mask) {
+ if (cause & (1 << adapter_info(adapter)->gpio_intr[i])) {
int phy_cause = p->phy.ops->intr_handler(&p->phy);
if (phy_cause & cphy_cause_link_change)
return 1;
}
+static unsigned int calc_gpio_intr(struct adapter *adap)
+{
+ unsigned int i, gpi_intr = 0;
+
+ for_each_port(adap, i)
+ if ((adap2pinfo(adap, i)->phy.caps & SUPPORTED_IRQ) &&
+ adapter_info(adap)->gpio_intr[i])
+ gpi_intr |= 1 << adapter_info(adap)->gpio_intr[i];
+ return gpi_intr;
+}
+
/**
* t3_intr_enable - enable interrupts
* @adapter: the adapter whose interrupts should be enabled
MC7_INTR_MASK},
{A_MC5_DB_INT_ENABLE, MC5_INTR_MASK},
{A_ULPRX_INT_ENABLE, ULPRX_INTR_MASK},
- {A_TP_INT_ENABLE, 0x3bfffff},
{A_PM1_TX_INT_ENABLE, PMTX_INTR_MASK},
{A_PM1_RX_INT_ENABLE, PMRX_INTR_MASK},
{A_CIM_HOST_INT_ENABLE, CIM_INTR_MASK},
adapter->slow_intr_mask = PL_INTR_MASK;
t3_write_regs(adapter, intr_en_avp, ARRAY_SIZE(intr_en_avp), 0);
+ t3_write_reg(adapter, A_TP_INT_ENABLE,
+ adapter->params.rev >= T3_REV_C ? 0x2bfffff : 0x3bfffff);
if (adapter->params.rev > 0) {
t3_write_reg(adapter, A_CPL_INTR_ENABLE,
t3_write_reg(adapter, A_ULPTX_INT_ENABLE, ULPTX_INTR_MASK);
}
- t3_write_reg(adapter, A_T3DBG_GPIO_ACT_LOW,
- adapter_info(adapter)->gpio_intr);
- t3_write_reg(adapter, A_T3DBG_INT_ENABLE,
- adapter_info(adapter)->gpio_intr);
+ t3_write_reg(adapter, A_T3DBG_INT_ENABLE, calc_gpio_intr(adapter));
+
if (is_pcie(adapter))
t3_write_reg(adapter, A_PCIE_INT_ENABLE, PCIE_INTR_MASK);
else
0, SG_CONTEXT_CMD_ATTEMPTS, 1);
}
+static int clear_sge_ctxt(struct adapter *adap, unsigned int id,
+ unsigned int type)
+{
+ t3_write_reg(adap, A_SG_CONTEXT_DATA0, 0);
+ t3_write_reg(adap, A_SG_CONTEXT_DATA1, 0);
+ t3_write_reg(adap, A_SG_CONTEXT_DATA2, 0);
+ t3_write_reg(adap, A_SG_CONTEXT_DATA3, 0);
+ return t3_sge_write_context(adap, id, type);
+}
+
/**
* t3_sge_init_ecntxt - initialize an SGE egress context
* @adapter: the adapter to configure
t3_write_reg((adap), A_ ## reg, (start)); \
start += size
-/*
+/**
* partition_mem - partition memory and configure TP memory settings
* @adap: the adapter
* @p: the TP parameters
V_AUTOSTATE2(1) | V_AUTOSTATE1(0) |
V_BYTETHRESHOLD(16384) | V_MSSTHRESHOLD(2) |
F_AUTOCAREFUL | F_AUTOENABLE | V_DACK_MODE(1));
- t3_set_reg_field(adap, A_TP_IN_CONFIG, F_IPV6ENABLE | F_NICMODE,
+ t3_set_reg_field(adap, A_TP_IN_CONFIG, F_RXFBARBPRIO | F_TXFBARBPRIO,
F_IPV6ENABLE | F_NICMODE);
t3_write_reg(adap, A_TP_TX_RESOURCE_LIMIT, 0x18141814);
t3_write_reg(adap, A_TP_PARA_REG4, 0x5050105);
F_ENABLEEPCMDAFULL,
F_ENABLEOCSPIFULL |F_TXDEFERENABLE | F_HEARBEATDACK |
F_TXCONGESTIONMODE | F_RXCONGESTIONMODE);
- t3_set_reg_field(adap, A_TP_PC_CONFIG2, F_CHDRAFULL, 0);
+ t3_set_reg_field(adap, A_TP_PC_CONFIG2, F_CHDRAFULL,
+ F_ENABLEIPV6RSS | F_ENABLENONOFDTNLSYN |
+ F_ENABLEARPMISS | F_DISBLEDAPARBIT0);
t3_write_reg(adap, A_TP_PROXY_FLOW_CNTL, 1080);
t3_write_reg(adap, A_TP_PROXY_FLOW_CNTL, 1000);
-
+
if (adap->params.rev > 0) {
tp_wr_indirect(adap, A_TP_EGRESS_CONFIG, F_REWRITEFORCETOSIZE);
t3_set_reg_field(adap, A_TP_PARA_REG3, F_TXPACEAUTO,
} else
t3_set_reg_field(adap, A_TP_PARA_REG3, 0, F_TXPACEFIXED);
+ if (adap->params.rev == T3_REV_C)
+ t3_set_reg_field(adap, A_TP_PC_CONFIG,
+ V_TABLELATENCYDELTA(M_TABLELATENCYDELTA),
+ V_TABLELATENCYDELTA(4));
+
t3_write_reg(adap, A_TP_TX_MOD_QUEUE_WEIGHT1, 0);
t3_write_reg(adap, A_TP_TX_MOD_QUEUE_WEIGHT0, 0);
t3_write_reg(adap, A_TP_MOD_CHANNEL_WEIGHT, 0);
V_PMMAXXFERLEN0(size) | V_PMMAXXFERLEN1(size));
}
-static void __devinit init_mtus(unsigned short mtus[])
+static void init_mtus(unsigned short mtus[])
{
/*
* See draft-mathis-plpmtud-00.txt for the values. The min is 88 so
/*
* Initial congestion control parameters.
*/
-static void __devinit init_cong_ctrl(unsigned short *a, unsigned short *b)
+static void init_cong_ctrl(unsigned short *a, unsigned short *b)
{
a[0] = a[1] = a[2] = a[3] = a[4] = a[5] = a[6] = a[7] = a[8] = 1;
a[9] = 2;
*
* Write the contents of the protocol SRAM.
*/
-int t3_set_proto_sram(struct adapter *adap, u8 *data)
+int t3_set_proto_sram(struct adapter *adap, const u8 *data)
{
int i;
- u32 *buf = (u32 *)data;
+ const __be32 *buf = (const __be32 *)data;
for (i = 0; i < PROTO_SRAM_LINES; i++) {
- t3_write_reg(adap, A_TP_EMBED_OP_FIELD5, cpu_to_be32(*buf++));
- t3_write_reg(adap, A_TP_EMBED_OP_FIELD4, cpu_to_be32(*buf++));
- t3_write_reg(adap, A_TP_EMBED_OP_FIELD3, cpu_to_be32(*buf++));
- t3_write_reg(adap, A_TP_EMBED_OP_FIELD2, cpu_to_be32(*buf++));
- t3_write_reg(adap, A_TP_EMBED_OP_FIELD1, cpu_to_be32(*buf++));
-
+ t3_write_reg(adap, A_TP_EMBED_OP_FIELD5, be32_to_cpu(*buf++));
+ t3_write_reg(adap, A_TP_EMBED_OP_FIELD4, be32_to_cpu(*buf++));
+ t3_write_reg(adap, A_TP_EMBED_OP_FIELD3, be32_to_cpu(*buf++));
+ t3_write_reg(adap, A_TP_EMBED_OP_FIELD2, be32_to_cpu(*buf++));
+ t3_write_reg(adap, A_TP_EMBED_OP_FIELD1, be32_to_cpu(*buf++));
+
t3_write_reg(adap, A_TP_EMBED_OP_FIELD0, i << 1 | 1 << 31);
if (t3_wait_op_done(adap, A_TP_EMBED_OP_FIELD0, 1, 1, 5, 1))
return -EIO;
V_REPLAYLMT(rpllmt));
t3_write_reg(adap, A_PCIE_PEX_ERR, 0xffffffff);
- t3_set_reg_field(adap, A_PCIE_CFG, F_PCIE_CLIDECEN, F_PCIE_CLIDECEN);
+ t3_set_reg_field(adap, A_PCIE_CFG, 0,
+ F_ENABLELINKDWNDRST | F_ENABLELINKDOWNRST |
+ F_PCIE_DMASTOPEN | F_PCIE_CLIDECEN);
}
/*
*/
int t3_init_hw(struct adapter *adapter, u32 fw_params)
{
- int err = -EIO, attempts = 100;
+ int err = -EIO, attempts, i;
const struct vpd_params *vpd = &adapter->params.vpd;
if (adapter->params.rev > 0)
adapter->params.mc5.nfilters,
adapter->params.mc5.nroutes))
goto out_err;
+
+ for (i = 0; i < 32; i++)
+ if (clear_sge_ctxt(adapter, i, F_CQ))
+ goto out_err;
}
if (tp_init(adapter, &adapter->params.tp))
if (is_pcie(adapter))
config_pcie(adapter);
else
- t3_set_reg_field(adapter, A_PCIX_CFG, 0, F_CLIDECEN);
+ t3_set_reg_field(adapter, A_PCIX_CFG, 0,
+ F_DMASTOPEN | F_CLIDECEN);
+
+ if (adapter->params.rev == T3_REV_C)
+ t3_set_reg_field(adapter, A_ULPTX_CONFIG, 0,
+ F_CFG_CQE_SOP_MASK);
t3_write_reg(adapter, A_PM1_RX_CFG, 0xffffffff);
t3_write_reg(adapter, A_PM1_RX_MODE, 0);
init_hw_for_avail_ports(adapter, adapter->params.nports);
t3_sge_init(adapter, &adapter->params.sge);
+ t3_write_reg(adapter, A_T3DBG_GPIO_ACT_LOW, calc_gpio_intr(adapter));
+
t3_write_reg(adapter, A_CIM_HOST_ACC_DATA, vpd->uclk | fw_params);
t3_write_reg(adapter, A_CIM_BOOT_CFG,
V_BOOTADDR(FW_FLASH_BOOT_ADDR >> 2));
t3_read_reg(adapter, A_CIM_BOOT_CFG); /* flush */
+ attempts = 100;
do { /* wait for uP to initialize */
msleep(20);
} while (t3_read_reg(adapter, A_CIM_HOST_ACC_DATA) && --attempts);
* Determines a card's PCI mode and associated parameters, such as speed
* and width.
*/
-static void __devinit get_pci_mode(struct adapter *adapter,
- struct pci_params *p)
+static void get_pci_mode(struct adapter *adapter, struct pci_params *p)
{
static unsigned short speed_map[] = { 33, 66, 100, 133 };
u32 pci_mode, pcie_cap;
* capabilities and default speed/duplex/flow-control/autonegotiation
* settings.
*/
-static void __devinit init_link_config(struct link_config *lc,
- unsigned int caps)
+static void init_link_config(struct link_config *lc, unsigned int caps)
{
lc->supported = caps;
lc->requested_speed = lc->speed = SPEED_INVALID;
* Calculates the size of an MC7 memory in bytes from the value of its
* configuration register.
*/
-static unsigned int __devinit mc7_calc_size(u32 cfg)
+static unsigned int mc7_calc_size(u32 cfg)
{
unsigned int width = G_WIDTH(cfg);
unsigned int banks = !!(cfg & F_BKS) + 1;
return MBs << 20;
}
-static void __devinit mc7_prep(struct adapter *adapter, struct mc7 *mc7,
- unsigned int base_addr, const char *name)
+static void mc7_prep(struct adapter *adapter, struct mc7 *mc7,
+ unsigned int base_addr, const char *name)
{
u32 cfg;
t3_write_reg(adapter, A_T3DBG_GPIO_EN,
ai->gpio_out | F_GPIO0_OEN | F_GPIO0_OUT_VAL);
t3_write_reg(adapter, A_MC5_DB_SERVER_INDEX, 0);
+ t3_write_reg(adapter, A_SG_OCO_BASE, V_BASE1(0xfff));
if (adapter->params.rev == 0 || !uses_xaui(adapter))
val |= F_ENRGMII;
}
/*
- * Reset the adapter.
+ * Reset the adapter.
* Older PCIe cards lose their config space during reset, PCI-X
* ones don't.
*/
-static int t3_reset_adapter(struct adapter *adapter)
+int t3_reset_adapter(struct adapter *adapter)
{
- int i, save_and_restore_pcie =
+ int i, save_and_restore_pcie =
adapter->params.rev < T3_REV_B2 && is_pcie(adapter);
uint16_t devid = 0;
return 0;
}
+static int init_parity(struct adapter *adap)
+{
+ int i, err, addr;
+
+ if (t3_read_reg(adap, A_SG_CONTEXT_CMD) & F_CONTEXT_CMD_BUSY)
+ return -EBUSY;
+
+ for (err = i = 0; !err && i < 16; i++)
+ err = clear_sge_ctxt(adap, i, F_EGRESS);
+ for (i = 0xfff0; !err && i <= 0xffff; i++)
+ err = clear_sge_ctxt(adap, i, F_EGRESS);
+ for (i = 0; !err && i < SGE_QSETS; i++)
+ err = clear_sge_ctxt(adap, i, F_RESPONSEQ);
+ if (err)
+ return err;
+
+ t3_write_reg(adap, A_CIM_IBQ_DBG_DATA, 0);
+ for (i = 0; i < 4; i++)
+ for (addr = 0; addr <= M_IBQDBGADDR; addr++) {
+ t3_write_reg(adap, A_CIM_IBQ_DBG_CFG, F_IBQDBGEN |
+ F_IBQDBGWR | V_IBQDBGQID(i) |
+ V_IBQDBGADDR(addr));
+ err = t3_wait_op_done(adap, A_CIM_IBQ_DBG_CFG,
+ F_IBQDBGBUSY, 0, 2, 1);
+ if (err)
+ return err;
+ }
+ return 0;
+}
+
/*
* Initialize adapter SW state for the various HW modules, set initial values
* for some adapter tunables, take PHYs out of reset, and initialize the MDIO
* interface.
*/
-int __devinit t3_prep_adapter(struct adapter *adapter,
- const struct adapter_info *ai, int reset)
+int t3_prep_adapter(struct adapter *adapter, const struct adapter_info *ai,
+ int reset)
{
int ret;
- unsigned int i, j = 0;
+ unsigned int i, j = -1;
get_pci_mode(adapter, &adapter->params.pci);
}
early_hw_init(adapter, ai);
+ ret = init_parity(adapter);
+ if (ret)
+ return ret;
for_each_port(adapter, i) {
u8 hw_addr[6];
+ const struct port_type_info *pti;
struct port_info *p = adap2pinfo(adapter, i);
- while (!adapter->params.vpd.port_type[j])
- ++j;
+ while (!adapter->params.vpd.port_type[++j])
+ ;
- p->port_type = &port_types[adapter->params.vpd.port_type[j]];
- p->port_type->phy_prep(&p->phy, adapter, ai->phy_base_addr + j,
- ai->mdio_ops);
+ pti = &port_types[adapter->params.vpd.port_type[j]];
+ ret = pti->phy_prep(&p->phy, adapter, ai->phy_base_addr + j,
+ ai->mdio_ops);
+ if (ret)
+ return ret;
mac_prep(&p->mac, adapter, j);
- ++j;
/*
* The VPD EEPROM stores the base Ethernet address for the
ETH_ALEN);
memcpy(adapter->port[i]->perm_addr, hw_addr,
ETH_ALEN);
- init_link_config(&p->link_config, p->port_type->caps);
+ init_link_config(&p->link_config, p->phy.caps);
p->phy.ops->power_down(&p->phy, 1);
- if (!(p->port_type->caps & SUPPORTED_IRQ))
+ if (!(p->phy.caps & SUPPORTED_IRQ))
adapter->params.linkpoll_period = 10;
}
t3_set_reg_field(adapter, A_T3DBG_GPIO_EN, F_GPIO0_OUT_VAL,
F_GPIO0_OUT_VAL);
}
+
+int t3_replay_prep_adapter(struct adapter *adapter)
+{
+ const struct adapter_info *ai = adapter->params.info;
+ unsigned int i, j = -1;
+ int ret;
+
+ early_hw_init(adapter, ai);
+ ret = init_parity(adapter);
+ if (ret)
+ return ret;
+
+ for_each_port(adapter, i) {
+ const struct port_type_info *pti;
+ struct port_info *p = adap2pinfo(adapter, i);
+
+ while (!adapter->params.vpd.port_type[++j])
+ ;
+
+ pti = &port_types[adapter->params.vpd.port_type[j]];
+ ret = pti->phy_prep(&p->phy, adapter, p->phy.addr, NULL);
+ if (ret)
+ return ret;
+ p->phy.ops->power_down(&p->phy, 1);
+ }
+
+return 0;
+}
+
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff