* Writing these bits maps control to another
* register. mmd(0x1) addr(0x7)
*/
- mdio_write(cphy, 0x3, 0x8304, 0xdddd);
+ cphy_mdio_write(cphy, MDIO_MMD_PCS, 0x8304, 0xdddd);
return 0;
}
u32 led = 0;
#define LINK_ENABLE_BIT 0x1
- mdio_read(cphy, 0x1, 0x7, &led);
+ cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_CTRL2, &led);
if (do_enable & LINK_ENABLE_BIT) {
led |= LINK_ENABLE_BIT;
- mdio_write(cphy, 0x1, 0x7, led);
+ cphy_mdio_write(cphy, MDIO_MMD_PMAPMD, MDIO_CTRL2, led);
} else {
led &= ~LINK_ENABLE_BIT;
- mdio_write(cphy, 0x1, 0x7, led);
+ cphy_mdio_write(cphy, MDIO_MMD_PMAPMD, MDIO_CTRL2, led);
}
return 0;
}
static int mv88x201x_interrupt_enable(struct cphy *cphy)
{
- u32 elmer;
-
/* Enable PHY LASI interrupts. */
- mdio_write(cphy, 0x1, 0x9002, 0x1);
+ cphy_mdio_write(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_CTRL,
+ MDIO_PMA_LASI_LSALARM);
/* Enable Marvell interrupts through Elmer0. */
- t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
- elmer |= ELMER0_GP_BIT6;
- t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
+ if (t1_is_asic(cphy->adapter)) {
+ u32 elmer;
+
+ t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
+ elmer |= ELMER0_GP_BIT6;
+ t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
+ }
return 0;
}
static int mv88x201x_interrupt_disable(struct cphy *cphy)
{
- u32 elmer;
-
/* Disable PHY LASI interrupts. */
- mdio_write(cphy, 0x1, 0x9002, 0x0);
+ cphy_mdio_write(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_CTRL, 0x0);
/* Disable Marvell interrupts through Elmer0. */
- t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
- elmer &= ~ELMER0_GP_BIT6;
- t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
+ if (t1_is_asic(cphy->adapter)) {
+ u32 elmer;
+
+ t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
+ elmer &= ~ELMER0_GP_BIT6;
+ t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
+ }
return 0;
}
#ifdef MV88x2010_LINK_STATUS_BUGS
/* Required to read twice before clear takes affect. */
- mdio_read(cphy, 0x1, 0x9003, &val);
- mdio_read(cphy, 0x1, 0x9004, &val);
- mdio_read(cphy, 0x1, 0x9005, &val);
+ cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_RXSTAT, &val);
+ cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_TXSTAT, &val);
+ cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_STAT, &val);
/* Read this register after the others above it else
* the register doesn't clear correctly.
*/
- mdio_read(cphy, 0x1, 0x1, &val);
+ cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_STAT1, &val);
#endif
/* Clear link status. */
- mdio_read(cphy, 0x1, 0x1, &val);
+ cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_STAT1, &val);
/* Clear PHY LASI interrupts. */
- mdio_read(cphy, 0x1, 0x9005, &val);
+ cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_STAT, &val);
#ifdef MV88x2010_LINK_STATUS_BUGS
/* Do it again. */
- mdio_read(cphy, 0x1, 0x9003, &val);
- mdio_read(cphy, 0x1, 0x9004, &val);
+ cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_RXSTAT, &val);
+ cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_TXSTAT, &val);
#endif
/* Clear Marvell interrupts through Elmer0. */
- t1_tpi_read(cphy->adapter, A_ELMER0_INT_CAUSE, &elmer);
- elmer |= ELMER0_GP_BIT6;
- t1_tpi_write(cphy->adapter, A_ELMER0_INT_CAUSE, elmer);
+ if (t1_is_asic(cphy->adapter)) {
+ t1_tpi_read(cphy->adapter, A_ELMER0_INT_CAUSE, &elmer);
+ elmer |= ELMER0_GP_BIT6;
+ t1_tpi_write(cphy->adapter, A_ELMER0_INT_CAUSE, elmer);
+ }
return 0;
}
int *speed, int *duplex, int *fc)
{
u32 val = 0;
-#define LINK_STATUS_BIT 0x4
if (link_ok) {
/* Read link status. */
- mdio_read(cphy, 0x1, 0x1, &val);
- val &= LINK_STATUS_BIT;
- *link_ok = (val == LINK_STATUS_BIT);
+ cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_STAT1, &val);
+ val &= MDIO_STAT1_LSTATUS;
+ *link_ok = (val == MDIO_STAT1_LSTATUS);
/* Turn on/off Link LED */
led_link(cphy, *link_ok);
}
.interrupt_handler = mv88x201x_interrupt_handler,
.get_link_status = mv88x201x_get_link_status,
.set_loopback = mv88x201x_set_loopback,
+ .mmds = (MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS |
+ MDIO_DEVS_PHYXS | MDIO_DEVS_WIS),
};
-static struct cphy *mv88x201x_phy_create(adapter_t *adapter, int phy_addr,
- struct mdio_ops *mdio_ops)
+static struct cphy *mv88x201x_phy_create(struct net_device *dev, int phy_addr,
+ const struct mdio_ops *mdio_ops)
{
u32 val;
- struct cphy *cphy = kmalloc(sizeof(*cphy), GFP_KERNEL);
+ struct cphy *cphy = kzalloc(sizeof(*cphy), GFP_KERNEL);
if (!cphy)
return NULL;
- memset(cphy, 0, sizeof(*cphy));
- cphy_init(cphy, adapter, phy_addr, &mv88x201x_ops, mdio_ops);
+
+ cphy_init(cphy, dev, phy_addr, &mv88x201x_ops, mdio_ops);
/* Commands the PHY to enable XFP's clock. */
- mdio_read(cphy, 0x3, 0x8300, &val);
- mdio_write(cphy, 0x3, 0x8300, val | 1);
+ cphy_mdio_read(cphy, MDIO_MMD_PCS, 0x8300, &val);
+ cphy_mdio_write(cphy, MDIO_MMD_PCS, 0x8300, val | 1);
/* Clear link status. Required because of a bug in the PHY. */
- mdio_read(cphy, 0x1, 0x8, &val);
- mdio_read(cphy, 0x3, 0x8, &val);
+ cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_STAT2, &val);
+ cphy_mdio_read(cphy, MDIO_MMD_PCS, MDIO_STAT2, &val);
/* Allows for Link,Ack LED turn on/off */
led_init(cphy);
return 0;
}
-struct gphy t1_mv88x201x_ops = {
- mv88x201x_phy_create,
- mv88x201x_phy_reset
+const struct gphy t1_mv88x201x_ops = {
+ .create = mv88x201x_phy_create,
+ .reset = mv88x201x_phy_reset
};