arguments "tq", "prop_seg", "phase_seg1", "phase_seg2" and "sjw".
If unsure, say Y.
-config CAN_SJA1000
- depends on CAN_DEV && HAS_IOMEM
- tristate "Philips SJA1000"
+config CAN_AT91
+ tristate "Atmel AT91 onchip CAN controller"
+ depends on CAN_DEV && ARCH_AT91SAM9263
---help---
- Driver for the SJA1000 CAN controllers from Philips or NXP
+ This is a driver for the SoC CAN controller in Atmel's AT91SAM9263.
-config CAN_SJA1000_ISA
- depends on CAN_SJA1000 && ISA
- tristate "ISA Bus based legacy SJA1000 driver"
+config CAN_TI_HECC
+ depends on CAN_DEV && ARCH_OMAP3
+ tristate "TI High End CAN Controller"
---help---
- This driver adds legacy support for SJA1000 chips connected to
- the ISA bus using I/O port, memory mapped or indirect access.
+ Driver for TI HECC (High End CAN Controller) module found on many
+ TI devices. The device specifications are available from www.ti.com
-config CAN_SJA1000_PLATFORM
- depends on CAN_SJA1000
- tristate "Generic Platform Bus based SJA1000 driver"
+config CAN_MCP251X
+ tristate "Microchip MCP251x SPI CAN controllers"
+ depends on CAN_DEV && SPI && HAS_DMA
---help---
- This driver adds support for the SJA1000 chips connected to
- the "platform bus" (Linux abstraction for directly to the
- processor attached devices). Which can be found on various
- boards from Phytec (http://www.phytec.de) like the PCM027,
- PCM038.
+ Driver for the Microchip MCP251x SPI CAN controllers.
-config CAN_SJA1000_OF_PLATFORM
- depends on CAN_SJA1000 && PPC_OF
- tristate "Generic OF Platform Bus based SJA1000 driver"
+config CAN_BFIN
+ depends on CAN_DEV && (BF534 || BF536 || BF537 || BF538 || BF539 || BF54x)
+ tristate "Analog Devices Blackfin on-chip CAN"
---help---
- This driver adds support for the SJA1000 chips connected to
- the OpenFirmware "platform bus" found on embedded systems with
- OpenFirmware bindings, e.g. if you have a PowerPC based system
- you may want to enable this option.
+ Driver for the Analog Devices Blackfin on-chip CAN controllers
-config CAN_EMS_PCI
- tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card"
- depends on PCI && CAN_SJA1000
- ---help---
- This driver is for the one, two or four channel CPC-PCI,
- CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
- (http://www.ems-wuensche.de).
+ To compile this driver as a module, choose M here: the
+ module will be called bfin_can.
-config CAN_KVASER_PCI
- tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
- depends on PCI && CAN_SJA1000
- ---help---
- This driver is for the the PCIcanx and PCIcan cards (1, 2 or
- 4 channel) from Kvaser (http://www.kvaser.com).
+source "drivers/net/can/mscan/Kconfig"
+
+source "drivers/net/can/sja1000/Kconfig"
+
+source "drivers/net/can/usb/Kconfig"
config CAN_DEBUG_DEVICES
bool "CAN devices debugging messages"