/* bnx2x_reg.h: Broadcom Everest network driver.
*
- * Copyright (c) 2007-2008 Broadcom Corporation
+ * Copyright (c) 2007-2009 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation.
*
- * The registers description starts with the regsister Access type followed
+ * The registers description starts with the register Access type followed
* by size in bits. For example [RW 32]. The access types are:
* R - Read only
* RC - Clear on read
address BRB1_IND_FREE_LIST_PRS_CRDT+1 initialize free tail. At address
BRB1_IND_FREE_LIST_PRS_CRDT+2 initialize parser initial credit. */
#define BRB1_REG_FREE_LIST_PRS_CRDT 0x60200
+/* [RW 10] The number of free blocks above which the High_llfc signal to
+ interface #n is de-asserted. */
+#define BRB1_REG_HIGH_LLFC_HIGH_THRESHOLD_0 0x6014c
+/* [RW 10] The number of free blocks below which the High_llfc signal to
+ interface #n is asserted. */
+#define BRB1_REG_HIGH_LLFC_LOW_THRESHOLD_0 0x6013c
/* [RW 23] LL RAM data. */
#define BRB1_REG_LL_RAM 0x61000
+/* [RW 10] The number of free blocks above which the Low_llfc signal to
+ interface #n is de-asserted. */
+#define BRB1_REG_LOW_LLFC_HIGH_THRESHOLD_0 0x6016c
+/* [RW 10] The number of free blocks below which the Low_llfc signal to
+ interface #n is asserted. */
+#define BRB1_REG_LOW_LLFC_LOW_THRESHOLD_0 0x6015c
/* [R 24] The number of full blocks. */
#define BRB1_REG_NUM_OF_FULL_BLOCKS 0x60090
/* [ST 32] The number of cycles that the write_full signal towards MAC #0
/* [RW 10] Write client 0: Assert pause threshold. */
#define BRB1_REG_PAUSE_LOW_THRESHOLD_0 0x60068
#define BRB1_REG_PAUSE_LOW_THRESHOLD_1 0x6006c
-/* [R 24] The number of full blocks occpied by port. */
+/* [R 24] The number of full blocks occupied by port. */
#define BRB1_REG_PORT_NUM_OCC_BLOCKS_0 0x60094
/* [RW 1] Reset the design by software. */
#define BRB1_REG_SOFT_RESET 0x600dc
stands for weight 8 (the most prioritised); 1 stands for weight 1(least
prioritised); 2 stands for weight 2; tc. */
#define CCM_REG_CQM_P_WEIGHT 0xd00b8
+/* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0
+ stands for weight 8 (the most prioritised); 1 stands for weight 1(least
+ prioritised); 2 stands for weight 2; tc. */
+#define CCM_REG_CQM_S_WEIGHT 0xd00bc
/* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded;
acknowledge output is deasserted; all other signals are treated as usual;
if 1 - normal activity. */
/* [RC 1] Set when the message length mismatch (relative to last indication)
at the SDM interface is detected. */
#define CCM_REG_CSDM_LENGTH_MIS 0xd0170
+/* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands for
+ weight 8 (the most prioritised); 1 stands for weight 1(least
+ prioritised); 2 stands for weight 2; tc. */
+#define CCM_REG_CSDM_WEIGHT 0xd00b4
/* [RW 28] The CM header for QM formatting in case of an error in the QM
inputs. */
#define CCM_REG_ERR_CCM_HDR 0xd0094
_(0..15) stands for the connection type (one of 16). */
#define CCM_REG_N_SM_CTX_LD_0 0xd004c
#define CCM_REG_N_SM_CTX_LD_1 0xd0050
-#define CCM_REG_N_SM_CTX_LD_10 0xd0074
-#define CCM_REG_N_SM_CTX_LD_11 0xd0078
-#define CCM_REG_N_SM_CTX_LD_12 0xd007c
-#define CCM_REG_N_SM_CTX_LD_13 0xd0080
-#define CCM_REG_N_SM_CTX_LD_14 0xd0084
-#define CCM_REG_N_SM_CTX_LD_15 0xd0088
#define CCM_REG_N_SM_CTX_LD_2 0xd0054
#define CCM_REG_N_SM_CTX_LD_3 0xd0058
#define CCM_REG_N_SM_CTX_LD_4 0xd005c
/* [RC 1] Set when the message length mismatch (relative to last indication)
at the STORM interface is detected. */
#define CCM_REG_STORM_LENGTH_MIS 0xd016c
+/* [RW 3] The weight of the STORM input in the WRR (Weighted Round robin)
+ mechanism. 0 stands for weight 8 (the most prioritised); 1 stands for
+ weight 1(least prioritised); 2 stands for weight 2 (more prioritised);
+ tc. */
+#define CCM_REG_STORM_WEIGHT 0xd009c
/* [RW 1] Input tsem Interface enable. If 0 - the valid input is
disregarded; acknowledge output is deasserted; all other signals are
treated as usual; if 1 - normal activity. */
set one of these bits. the bit description can be found in CFC
specifications */
#define CFC_REG_ERROR_VECTOR 0x10403c
+/* [WB 93] LCID info ram access */
+#define CFC_REG_INFO_RAM 0x105000
+#define CFC_REG_INFO_RAM_SIZE 1024
#define CFC_REG_INIT_REG 0x10404c
+#define CFC_REG_INTERFACES 0x104058
/* [RW 24] {weight_load_client7[2:0] to weight_load_client0[2:0]}. this
field allows changing the priorities of the weighted-round-robin arbiter
which selects which CFC load client should be served next */
#define CFC_REG_NUM_LCIDS_ALLOC 0x104020
/* [R 9] Number of Arriving LCIDs in Link List Block */
#define CFC_REG_NUM_LCIDS_ARRIVING 0x104004
-/* [R 9] Number of Inside LCIDs in Link List Block */
-#define CFC_REG_NUM_LCIDS_INSIDE 0x104008
/* [R 9] Number of Leaving LCIDs in Link List Block */
#define CFC_REG_NUM_LCIDS_LEAVING 0x104018
/* [RW 8] The event id for aggregated interrupt 0 */
#define CSDM_REG_AGG_INT_EVENT_0 0xc2038
-#define CSDM_REG_AGG_INT_EVENT_1 0xc203c
#define CSDM_REG_AGG_INT_EVENT_10 0xc2060
#define CSDM_REG_AGG_INT_EVENT_11 0xc2064
#define CSDM_REG_AGG_INT_EVENT_12 0xc2068
#define CSDM_REG_AGG_INT_EVENT_14 0xc2070
#define CSDM_REG_AGG_INT_EVENT_15 0xc2074
#define CSDM_REG_AGG_INT_EVENT_16 0xc2078
-#define CSDM_REG_AGG_INT_EVENT_17 0xc207c
-#define CSDM_REG_AGG_INT_EVENT_18 0xc2080
-#define CSDM_REG_AGG_INT_EVENT_19 0xc2084
#define CSDM_REG_AGG_INT_EVENT_2 0xc2040
-#define CSDM_REG_AGG_INT_EVENT_20 0xc2088
-#define CSDM_REG_AGG_INT_EVENT_21 0xc208c
-#define CSDM_REG_AGG_INT_EVENT_22 0xc2090
-#define CSDM_REG_AGG_INT_EVENT_23 0xc2094
-#define CSDM_REG_AGG_INT_EVENT_24 0xc2098
-#define CSDM_REG_AGG_INT_EVENT_25 0xc209c
-#define CSDM_REG_AGG_INT_EVENT_26 0xc20a0
-#define CSDM_REG_AGG_INT_EVENT_27 0xc20a4
-#define CSDM_REG_AGG_INT_EVENT_28 0xc20a8
-#define CSDM_REG_AGG_INT_EVENT_29 0xc20ac
#define CSDM_REG_AGG_INT_EVENT_3 0xc2044
-#define CSDM_REG_AGG_INT_EVENT_30 0xc20b0
-#define CSDM_REG_AGG_INT_EVENT_31 0xc20b4
#define CSDM_REG_AGG_INT_EVENT_4 0xc2048
-/* [RW 1] The T bit for aggregated interrupt 0 */
-#define CSDM_REG_AGG_INT_T_0 0xc20b8
-#define CSDM_REG_AGG_INT_T_1 0xc20bc
-#define CSDM_REG_AGG_INT_T_10 0xc20e0
-#define CSDM_REG_AGG_INT_T_11 0xc20e4
-#define CSDM_REG_AGG_INT_T_12 0xc20e8
-#define CSDM_REG_AGG_INT_T_13 0xc20ec
-#define CSDM_REG_AGG_INT_T_14 0xc20f0
-#define CSDM_REG_AGG_INT_T_15 0xc20f4
-#define CSDM_REG_AGG_INT_T_16 0xc20f8
-#define CSDM_REG_AGG_INT_T_17 0xc20fc
-#define CSDM_REG_AGG_INT_T_18 0xc2100
-#define CSDM_REG_AGG_INT_T_19 0xc2104
+#define CSDM_REG_AGG_INT_EVENT_5 0xc204c
+#define CSDM_REG_AGG_INT_EVENT_6 0xc2050
+#define CSDM_REG_AGG_INT_EVENT_7 0xc2054
+#define CSDM_REG_AGG_INT_EVENT_8 0xc2058
+#define CSDM_REG_AGG_INT_EVENT_9 0xc205c
+/* [RW 1] For each aggregated interrupt index whether the mode is normal (0)
+ or auto-mask-mode (1) */
+#define CSDM_REG_AGG_INT_MODE_10 0xc21e0
+#define CSDM_REG_AGG_INT_MODE_11 0xc21e4
+#define CSDM_REG_AGG_INT_MODE_12 0xc21e8
+#define CSDM_REG_AGG_INT_MODE_13 0xc21ec
+#define CSDM_REG_AGG_INT_MODE_14 0xc21f0
+#define CSDM_REG_AGG_INT_MODE_15 0xc21f4
+#define CSDM_REG_AGG_INT_MODE_16 0xc21f8
+#define CSDM_REG_AGG_INT_MODE_6 0xc21d0
+#define CSDM_REG_AGG_INT_MODE_7 0xc21d4
+#define CSDM_REG_AGG_INT_MODE_8 0xc21d8
+#define CSDM_REG_AGG_INT_MODE_9 0xc21dc
/* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
#define CSDM_REG_CFC_RSP_START_ADDR 0xc2008
/* [RW 16] The maximum value of the competion counter #0 */
#define DMAE_REG_GO_C1 0x102084
/* [RW 1] Command 10 go. */
#define DMAE_REG_GO_C10 0x102088
-#define DMAE_REG_GO_C10_SIZE 1
-/* [RW 1] Command 11 go. */
-#define DMAE_REG_GO_C11 0x10208c
-#define DMAE_REG_GO_C11_SIZE 1
-/* [RW 1] Command 12 go. */
-#define DMAE_REG_GO_C12 0x102090
-#define DMAE_REG_GO_C12_SIZE 1
-/* [RW 1] Command 13 go. */
-#define DMAE_REG_GO_C13 0x102094
-#define DMAE_REG_GO_C13_SIZE 1
-/* [RW 1] Command 14 go. */
-#define DMAE_REG_GO_C14 0x102098
-#define DMAE_REG_GO_C14_SIZE 1
-/* [RW 1] Command 15 go. */
-#define DMAE_REG_GO_C15 0x10209c
-#define DMAE_REG_GO_C15_SIZE 1
-/* [RW 1] Command 10 go. */
-#define DMAE_REG_GO_C10 0x102088
/* [RW 1] Command 11 go. */
#define DMAE_REG_GO_C11 0x10208c
/* [RW 1] Command 12 go. */
#define DORQ_REG_SHRT_CMHEAD 0x170054
#define HC_CONFIG_0_REG_ATTN_BIT_EN_0 (0x1<<4)
#define HC_CONFIG_0_REG_INT_LINE_EN_0 (0x1<<3)
+#define HC_CONFIG_0_REG_MSI_ATTN_EN_0 (0x1<<7)
#define HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 (0x1<<2)
#define HC_CONFIG_0_REG_SINGLE_ISR_EN_0 (0x1<<1)
#define HC_REG_AGG_INT_0 0x108050
#define MCP_REG_MCPR_NVM_READ 0x86410
#define MCP_REG_MCPR_NVM_SW_ARB 0x86420
#define MCP_REG_MCPR_NVM_WRITE 0x86408
-#define MCP_REG_MCPR_NVM_WRITE1 0x86428
#define MCP_REG_MCPR_SCRATCH 0xa0000
/* [R 32] read first 32 bit after inversion of function 0. mapped as
follows: [0] NIG attention for function0; [1] NIG attention for
#define MISC_REG_AEU_GENERAL_ATTN_10 0xa028
#define MISC_REG_AEU_GENERAL_ATTN_11 0xa02c
#define MISC_REG_AEU_GENERAL_ATTN_12 0xa030
-#define MISC_REG_AEU_GENERAL_ATTN_13 0xa034
-#define MISC_REG_AEU_GENERAL_ATTN_14 0xa038
-#define MISC_REG_AEU_GENERAL_ATTN_15 0xa03c
-#define MISC_REG_AEU_GENERAL_ATTN_16 0xa040
-#define MISC_REG_AEU_GENERAL_ATTN_17 0xa044
-#define MISC_REG_AEU_GENERAL_ATTN_18 0xa048
-#define MISC_REG_AEU_GENERAL_ATTN_19 0xa04c
-#define MISC_REG_AEU_GENERAL_ATTN_10 0xa028
-#define MISC_REG_AEU_GENERAL_ATTN_11 0xa02c
-#define MISC_REG_AEU_GENERAL_ATTN_12 0xa030
#define MISC_REG_AEU_GENERAL_ATTN_2 0xa008
-#define MISC_REG_AEU_GENERAL_ATTN_20 0xa050
-#define MISC_REG_AEU_GENERAL_ATTN_21 0xa054
#define MISC_REG_AEU_GENERAL_ATTN_3 0xa00c
#define MISC_REG_AEU_GENERAL_ATTN_4 0xa010
#define MISC_REG_AEU_GENERAL_ATTN_5 0xa014
set. if the appropriate bit is clear (the driver request to free a client
it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
be asserted). */
-#define MISC_REG_DRIVER_CONTROL_10 0xa3e0
-#define MISC_REG_DRIVER_CONTROL_10_SIZE 2
-/* [RW 32] The following driver registers(1...16) represent 16 drivers and
- 32 clients. Each client can be controlled by one driver only. One in each
- bit represent that this driver control the appropriate client (Ex: bit 5
- is set means this driver control client number 5). addr1 = set; addr0 =
- clear; read from both addresses will give the same result = status. write
- to address 1 will set a request to control all the clients that their
- appropriate bit (in the write command) is set. if the client is free (the
- appropriate bit in all the other drivers is clear) one will be written to
- that driver register; if the client isn't free the bit will remain zero.
- if the appropriate bit is set (the driver request to gain control on a
- client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
- interrupt will be asserted). write to address 0 will set a request to
- free all the clients that their appropriate bit (in the write command) is
- set. if the appropriate bit is clear (the driver request to free a client
- it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
- be asserted). */
-#define MISC_REG_DRIVER_CONTROL_11 0xa3e8
-#define MISC_REG_DRIVER_CONTROL_11_SIZE 2
-/* [RW 32] The following driver registers(1...16) represent 16 drivers and
- 32 clients. Each client can be controlled by one driver only. One in each
- bit represent that this driver control the appropriate client (Ex: bit 5
- is set means this driver control client number 5). addr1 = set; addr0 =
- clear; read from both addresses will give the same result = status. write
- to address 1 will set a request to control all the clients that their
- appropriate bit (in the write command) is set. if the client is free (the
- appropriate bit in all the other drivers is clear) one will be written to
- that driver register; if the client isn't free the bit will remain zero.
- if the appropriate bit is set (the driver request to gain control on a
- client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
- interrupt will be asserted). write to address 0 will set a request to
- free all the clients that their appropriate bit (in the write command) is
- set. if the appropriate bit is clear (the driver request to free a client
- it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
- be asserted). */
-#define MISC_REG_DRIVER_CONTROL_12 0xa3f0
-#define MISC_REG_DRIVER_CONTROL_12_SIZE 2
-/* [RW 32] The following driver registers(1...16) represent 16 drivers and
- 32 clients. Each client can be controlled by one driver only. One in each
- bit represent that this driver control the appropriate client (Ex: bit 5
- is set means this driver control client number 5). addr1 = set; addr0 =
- clear; read from both addresses will give the same result = status. write
- to address 1 will set a request to control all the clients that their
- appropriate bit (in the write command) is set. if the client is free (the
- appropriate bit in all the other drivers is clear) one will be written to
- that driver register; if the client isn't free the bit will remain zero.
- if the appropriate bit is set (the driver request to gain control on a
- client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
- interrupt will be asserted). write to address 0 will set a request to
- free all the clients that their appropriate bit (in the write command) is
- set. if the appropriate bit is clear (the driver request to free a client
- it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
- be asserted). */
-#define MISC_REG_DRIVER_CONTROL_13 0xa3f8
-#define MISC_REG_DRIVER_CONTROL_13_SIZE 2
-/* [RW 32] The following driver registers(1...16) represent 16 drivers and
- 32 clients. Each client can be controlled by one driver only. One in each
- bit represent that this driver control the appropriate client (Ex: bit 5
- is set means this driver control client number 5). addr1 = set; addr0 =
- clear; read from both addresses will give the same result = status. write
- to address 1 will set a request to control all the clients that their
- appropriate bit (in the write command) is set. if the client is free (the
- appropriate bit in all the other drivers is clear) one will be written to
- that driver register; if the client isn't free the bit will remain zero.
- if the appropriate bit is set (the driver request to gain control on a
- client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
- interrupt will be asserted). write to address 0 will set a request to
- free all the clients that their appropriate bit (in the write command) is
- set. if the appropriate bit is clear (the driver request to free a client
- it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
- be asserted). */
#define MISC_REG_DRIVER_CONTROL_1 0xa510
-#define MISC_REG_DRIVER_CONTROL_14 0xa5e0
-#define MISC_REG_DRIVER_CONTROL_14_SIZE 2
-/* [RW 32] The following driver registers(1...16) represent 16 drivers and
- 32 clients. Each client can be controlled by one driver only. One in each
- bit represent that this driver control the appropriate client (Ex: bit 5
- is set means this driver control client number 5). addr1 = set; addr0 =
- clear; read from both addresses will give the same result = status. write
- to address 1 will set a request to control all the clients that their
- appropriate bit (in the write command) is set. if the client is free (the
- appropriate bit in all the other drivers is clear) one will be written to
- that driver register; if the client isn't free the bit will remain zero.
- if the appropriate bit is set (the driver request to gain control on a
- client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
- interrupt will be asserted). write to address 0 will set a request to
- free all the clients that their appropriate bit (in the write command) is
- set. if the appropriate bit is clear (the driver request to free a client
- it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
- be asserted). */
-#define MISC_REG_DRIVER_CONTROL_15 0xa5e8
-#define MISC_REG_DRIVER_CONTROL_15_SIZE 2
-/* [RW 32] The following driver registers(1...16) represent 16 drivers and
- 32 clients. Each client can be controlled by one driver only. One in each
- bit represent that this driver control the appropriate client (Ex: bit 5
- is set means this driver control client number 5). addr1 = set; addr0 =
- clear; read from both addresses will give the same result = status. write
- to address 1 will set a request to control all the clients that their
- appropriate bit (in the write command) is set. if the client is free (the
- appropriate bit in all the other drivers is clear) one will be written to
- that driver register; if the client isn't free the bit will remain zero.
- if the appropriate bit is set (the driver request to gain control on a
- client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
- interrupt will be asserted). write to address 0 will set a request to
- free all the clients that their appropriate bit (in the write command) is
- set. if the appropriate bit is clear (the driver request to free a client
- it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
- be asserted). */
-#define MISC_REG_DRIVER_CONTROL_16 0xa5f0
-#define MISC_REG_DRIVER_CONTROL_16_SIZE 2
-/* [RW 32] The following driver registers(1...16) represent 16 drivers and
- 32 clients. Each client can be controlled by one driver only. One in each
- bit represent that this driver control the appropriate client (Ex: bit 5
- is set means this driver control client number 5). addr1 = set; addr0 =
- clear; read from both addresses will give the same result = status. write
- to address 1 will set a request to control all the clients that their
- appropriate bit (in the write command) is set. if the client is free (the
- appropriate bit in all the other drivers is clear) one will be written to
- that driver register; if the client isn't free the bit will remain zero.
- if the appropriate bit is set (the driver request to gain control on a
- client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
- interrupt will be asserted). write to address 0 will set a request to
- free all the clients that their appropriate bit (in the write command) is
- set. if the appropriate bit is clear (the driver request to free a client
- it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
- be asserted). */
#define MISC_REG_DRIVER_CONTROL_7 0xa3c8
/* [RW 1] e1hmf for WOL. If clr WOL signal o the PXP will be send on bit 0
only. */
#define MISC_REG_E1HMF_MODE 0xa5f8
+/* [RW 32] Debug only: spare RW register reset by core reset */
+#define MISC_REG_GENERIC_CR_0 0xa460
/* [RW 32] GPIO. [31-28] FLOAT port 0; [27-24] FLOAT port 0; When any of
these bits is written as a '1'; the corresponding SPIO bit will turn off
it's drivers and become an input. This is the reset state of all GPIO
This is the result value of the pin; not the drive value. Writing these
bits will have not effect. */
#define MISC_REG_GPIO 0xa490
+/* [RW 8] These bits enable the GPIO_INTs to signals event to the
+ IGU/MCP.according to the following map: [0] p0_gpio_0; [1] p0_gpio_1; [2]
+ p0_gpio_2; [3] p0_gpio_3; [4] p1_gpio_0; [5] p1_gpio_1; [6] p1_gpio_2;
+ [7] p1_gpio_3; */
+#define MISC_REG_GPIO_EVENT_EN 0xa2bc
+/* [RW 32] GPIO INT. [31-28] OLD_CLR port1; [27-24] OLD_CLR port0; Writing a
+ '1' to these bit clears the corresponding bit in the #OLD_VALUE register.
+ This will acknowledge an interrupt on the falling edge of corresponding
+ GPIO input (reset value 0). [23-16] OLD_SET [23-16] port1; OLD_SET port0;
+ Writing a '1' to these bit sets the corresponding bit in the #OLD_VALUE
+ register. This will acknowledge an interrupt on the rising edge of
+ corresponding SPIO input (reset value 0). [15-12] OLD_VALUE [11-8] port1;
+ OLD_VALUE port0; RO; These bits indicate the old value of the GPIO input
+ value. When the ~INT_STATE bit is set; this bit indicates the OLD value
+ of the pin such that if ~INT_STATE is set and this bit is '0'; then the
+ interrupt is due to a low to high edge. If ~INT_STATE is set and this bit
+ is '1'; then the interrupt is due to a high to low edge (reset value 0).
+ [7-4] INT_STATE port1; [3-0] INT_STATE RO port0; These bits indicate the
+ current GPIO interrupt state for each GPIO pin. This bit is cleared when
+ the appropriate #OLD_SET or #OLD_CLR command bit is written. This bit is
+ set when the GPIO input does not match the current value in #OLD_VALUE
+ (reset value 0). */
+#define MISC_REG_GPIO_INT 0xa494
/* [R 28] this field hold the last information that caused reserved
attention. bits [19:0] - address; [22:20] function; [23] reserved;
- [27:24] the master thatcaused the attention - according to the following
+ [27:24] the master that caused the attention - according to the following
encodeing:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 =
dbu; 8 = dmae */
#define MISC_REG_GRC_RSV_ATTN 0xa3c0
/* [R 28] this field hold the last information that caused timeout
attention. bits [19:0] - address; [22:20] function; [23] reserved;
- [27:24] the master thatcaused the attention - according to the following
+ [27:24] the master that caused the attention - according to the following
encodeing:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 =
dbu; 8 = dmae */
#define MISC_REG_GRC_TIMEOUT_ATTN 0xa3c4
command bit is written. This bit is set when the SPIO input does not
match the current value in #OLD_VALUE (reset value 0). */
#define MISC_REG_SPIO_INT 0xa500
+/* [RW 32] reload value for counter 4 if reload; the value will be reload if
+ the counter reached zero and the reload bit
+ (~misc_registers_sw_timer_cfg_4.sw_timer_cfg_4[1] ) is set */
+#define MISC_REG_SW_TIMER_RELOAD_VAL_4 0xa2fc
+/* [RW 32] the value of the counter for sw timers1-8. there are 8 addresses
+ in this register. addres 0 - timer 1; address - timer 2�address 7 -
+ timer 8 */
+#define MISC_REG_SW_TIMER_VAL 0xa5c0
/* [RW 1] Set by the MCP to remember if one or more of the drivers is/are
loaded; 0-prepare; -unprepare */
#define MISC_REG_UNPREPARED 0xa424
+#define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_BRCST (0x1<<0)
+#define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_MLCST (0x1<<1)
+#define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_NO_VLAN (0x1<<4)
+#define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_UNCST (0x1<<2)
+#define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_VLAN (0x1<<3)
#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT (0x1<<0)
#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_SERDES0_LINK_STATUS (0x1<<9)
#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK10G (0x1<<15)
/* [RW 1] MAC configuration for packets of port0. If 1 - all packet outputs
to emac for port0; other way to bmac for port0 */
#define NIG_REG_EGRESS_EMAC0_PORT 0x10058
-/* [RW 32] TX_MNG_FIFO in NIG_TX_PORT0; data[31:0] written in FIFO order. */
-#define NIG_REG_EGRESS_MNG0_FIFO 0x1045c
/* [RW 1] Input enable for TX PBF user packet port0 IF */
#define NIG_REG_EGRESS_PBF0_IN_EN 0x100cc
/* [RW 1] Input enable for TX PBF user packet port1 IF */
#define NIG_REG_EGRESS_PBF1_IN_EN 0x100d0
+/* [RW 1] Input enable for TX UMP management packet port0 IF */
+#define NIG_REG_EGRESS_UMP0_IN_EN 0x100d4
/* [RW 1] Input enable for RX_EMAC0 IF */
#define NIG_REG_EMAC0_IN_EN 0x100a4
/* [RW 1] output enable for TX EMAC pause port 0 IF */
/* [RW 17] Debug only. RX_EOP_DSCR_lb_FIFO in NIG_RX_EOP. Data
packet_length[13:0]; mac_error[14]; trunc_error[15]; parity[16] */
#define NIG_REG_INGRESS_EOP_LB_FIFO 0x104e4
+/* [RW 27] 0 - must be active for Everest A0; 1- for Everest B0 when latch
+ logic for interrupts must be used. Enable per bit of interrupt of
+ ~latch_status.latch_status */
+#define NIG_REG_LATCH_BC_0 0x16210
+/* [RW 27] Latch for each interrupt from Unicore.b[0]
+ status_emac0_misc_mi_int; b[1] status_emac0_misc_mi_complete;
+ b[2]status_emac0_misc_cfg_change; b[3]status_emac0_misc_link_status;
+ b[4]status_emac0_misc_link_change; b[5]status_emac0_misc_attn;
+ b[6]status_serdes0_mac_crs; b[7]status_serdes0_autoneg_complete;
+ b[8]status_serdes0_fiber_rxact; b[9]status_serdes0_link_status;
+ b[10]status_serdes0_mr_page_rx; b[11]status_serdes0_cl73_an_complete;
+ b[12]status_serdes0_cl73_mr_page_rx; b[13]status_serdes0_rx_sigdet;
+ b[14]status_xgxs0_remotemdioreq; b[15]status_xgxs0_link10g;
+ b[16]status_xgxs0_autoneg_complete; b[17]status_xgxs0_fiber_rxact;
+ b[21:18]status_xgxs0_link_status; b[22]status_xgxs0_mr_page_rx;
+ b[23]status_xgxs0_cl73_an_complete; b[24]status_xgxs0_cl73_mr_page_rx;
+ b[25]status_xgxs0_rx_sigdet; b[26]status_xgxs0_mac_crs */
+#define NIG_REG_LATCH_STATUS_0 0x18000
/* [RW 1] led 10g for port 0 */
#define NIG_REG_LED_10G_P0 0x10320
/* [RW 1] led 10g for port 1 */
/* [RW 4] led mode for port0: 0 MAC; 1-3 PHY1; 4 MAC2; 5-7 PHY4; 8-MAC3;
9-11PHY7; 12 MAC4; 13-15 PHY10; */
#define NIG_REG_LED_MODE_P0 0x102f0
+/* [RW 3] for port0 enable for llfc ppp and pause. b0 - brb1 enable; b1-
+ tsdm enable; b2- usdm enable */
+#define NIG_REG_LLFC_EGRESS_SRC_ENABLE_0 0x16070
+#define NIG_REG_LLFC_EGRESS_SRC_ENABLE_1 0x16074
+/* [RW 1] SAFC enable for port0. This register may get 1 only when
+ ~ppp_enable.ppp_enable = 0 and pause_enable.pause_enable =0 for the same
+ port */
+#define NIG_REG_LLFC_ENABLE_0 0x16208
+/* [RW 16] classes are high-priority for port0 */
+#define NIG_REG_LLFC_HIGH_PRIORITY_CLASSES_0 0x16058
+/* [RW 16] classes are low-priority for port0 */
+#define NIG_REG_LLFC_LOW_PRIORITY_CLASSES_0 0x16060
+/* [RW 1] Output enable of message to LLFC BMAC IF for port0 */
+#define NIG_REG_LLFC_OUT_EN_0 0x160c8
#define NIG_REG_LLH0_ACPI_PAT_0_CRC 0x1015c
#define NIG_REG_LLH0_ACPI_PAT_6_LEN 0x10154
#define NIG_REG_LLH0_BRB1_DRV_MASK 0x10244
#define NIG_REG_NIG_INT_STS_1 0x103c0
/* [R 32] Parity register #0 read */
#define NIG_REG_NIG_PRTY_STS 0x103d0
+/* [RW 1] Pause enable for port0. This register may get 1 only when
+ ~safc_enable.safc_enable = 0 and ppp_enable.ppp_enable =0 for the same
+ port */
+#define NIG_REG_PAUSE_ENABLE_0 0x160c0
/* [RW 1] Input enable for RX PBF LP IF */
#define NIG_REG_PBF_LB_IN_EN 0x100b4
/* [RW 1] Value of this register will be transmitted to port swap when
#define NIG_REG_PRS_EOP_OUT_EN 0x10104
/* [RW 1] Input enable for RX parser request IF */
#define NIG_REG_PRS_REQ_IN_EN 0x100b8
+/* [RW 5] control to serdes - CL45 DEVAD */
+#define NIG_REG_SERDES0_CTRL_MD_DEVAD 0x10370
+/* [RW 1] control to serdes; 0 - clause 45; 1 - clause 22 */
+#define NIG_REG_SERDES0_CTRL_MD_ST 0x1036c
/* [RW 5] control to serdes - CL22 PHY_ADD and CL45 PRTAD */
#define NIG_REG_SERDES0_CTRL_PHY_ADDR 0x10374
/* [R 1] status from serdes0 that inputs to interrupt logic of link status */
#define NIG_REG_XGXS_LANE_SEL_P0 0x102e8
/* [RW 1] selection for port0 for NIG_MUX block : 0 = SerDes; 1 = XGXS */
#define NIG_REG_XGXS_SERDES0_MODE_SEL 0x102e0
+#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_EMAC0_MISC_MI_INT (0x1<<0)
#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_SERDES0_LINK_STATUS (0x1<<9)
#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G (0x1<<15)
#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS (0xf<<18)
#define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_2 0x400e4
#define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_3 0x400e8
#define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_4 0x400ec
+#define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_5 0x400f0
/* [RW 32] The CM header for flush message where 'load existed' bit in CFC
load response is set and packet type is 0. Used in packet start message
to TCM. */
#define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_2 0x400c4
#define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_3 0x400c8
#define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_4 0x400cc
+#define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_5 0x400d0
/* [RW 32] The CM header for a match and packet type 1 for loopback port.
Used in packet start message to TCM. */
#define PRS_REG_CM_HDR_LOOPBACK_TYPE_1 0x4009c
#define PXP2_REG_PGL_ADDR_94_F0 0x120540
#define PXP2_REG_PGL_CONTROL0 0x120490
#define PXP2_REG_PGL_CONTROL1 0x120514
+#define PXP2_REG_PGL_DEBUG 0x120520
/* [RW 32] third dword data of expansion rom request. this register is
special. reading from it provides a vector outstanding read requests. if
a bit is zero it means that a read request on the corresponding tag did
#define PXP2_REG_PGL_INT_XSDM_5 0x1204e8
#define PXP2_REG_PGL_INT_XSDM_6 0x1204ec
#define PXP2_REG_PGL_INT_XSDM_7 0x1204f0
+/* [RW 3] this field allows one function to pretend being another function
+ when accessing any BAR mapped resource within the device. the value of
+ the field is the number of the function that will be accessed
+ effectively. after software write to this bit it must read it in order to
+ know that the new value is updated */
+#define PXP2_REG_PGL_PRETEND_FUNC_F0 0x120674
+#define PXP2_REG_PGL_PRETEND_FUNC_F1 0x120678
+#define PXP2_REG_PGL_PRETEND_FUNC_F2 0x12067c
+#define PXP2_REG_PGL_PRETEND_FUNC_F3 0x120680
+#define PXP2_REG_PGL_PRETEND_FUNC_F4 0x120684
+#define PXP2_REG_PGL_PRETEND_FUNC_F5 0x120688
+#define PXP2_REG_PGL_PRETEND_FUNC_F6 0x12068c
+#define PXP2_REG_PGL_PRETEND_FUNC_F7 0x120690
/* [R 1] this bit indicates that a read request was blocked because of
bus_master_en was deasserted */
#define PXP2_REG_PGL_READ_BLOCKED 0x120568
#define PXP2_REG_PSWRQ_BW_ADD1 0x1201c0
#define PXP2_REG_PSWRQ_BW_ADD10 0x1201e4
#define PXP2_REG_PSWRQ_BW_ADD11 0x1201e8
-#define PXP2_REG_PSWRQ_BW_ADD10 0x1201e4
-#define PXP2_REG_PSWRQ_BW_ADD11 0x1201e8
#define PXP2_REG_PSWRQ_BW_ADD2 0x1201c4
#define PXP2_REG_PSWRQ_BW_ADD28 0x120228
-#define PXP2_REG_PSWRQ_BW_ADD28 0x120228
#define PXP2_REG_PSWRQ_BW_ADD3 0x1201c8
#define PXP2_REG_PSWRQ_BW_ADD6 0x1201d4
#define PXP2_REG_PSWRQ_BW_ADD7 0x1201d8
#define PXP2_REG_PSWRQ_BW_L1 0x1202b0
#define PXP2_REG_PSWRQ_BW_L10 0x1202d4
#define PXP2_REG_PSWRQ_BW_L11 0x1202d8
-#define PXP2_REG_PSWRQ_BW_L10 0x1202d4
-#define PXP2_REG_PSWRQ_BW_L11 0x1202d8
#define PXP2_REG_PSWRQ_BW_L2 0x1202b4
#define PXP2_REG_PSWRQ_BW_L28 0x120318
-#define PXP2_REG_PSWRQ_BW_L28 0x120318
#define PXP2_REG_PSWRQ_BW_L3 0x1202b8
#define PXP2_REG_PSWRQ_BW_L6 0x1202c4
#define PXP2_REG_PSWRQ_BW_L7 0x1202c8
#define PXP2_REG_PSWRQ_BW_UB1 0x120238
#define PXP2_REG_PSWRQ_BW_UB10 0x12025c
#define PXP2_REG_PSWRQ_BW_UB11 0x120260
-#define PXP2_REG_PSWRQ_BW_UB10 0x12025c
-#define PXP2_REG_PSWRQ_BW_UB11 0x120260
#define PXP2_REG_PSWRQ_BW_UB2 0x12023c
#define PXP2_REG_PSWRQ_BW_UB28 0x1202a0
-#define PXP2_REG_PSWRQ_BW_UB28 0x1202a0
#define PXP2_REG_PSWRQ_BW_UB3 0x120240
#define PXP2_REG_PSWRQ_BW_UB6 0x12024c
#define PXP2_REG_PSWRQ_BW_UB7 0x120250
allocated for vq22 */
#define PXP2_REG_RD_MAX_BLKS_VQ22 0x1203d0
/* [RW 8] The maximum number of blocks in Tetris Buffer that can be
+ allocated for vq25 */
+#define PXP2_REG_RD_MAX_BLKS_VQ25 0x1203dc
+/* [RW 8] The maximum number of blocks in Tetris Buffer that can be
allocated for vq6 */
#define PXP2_REG_RD_MAX_BLKS_VQ6 0x120390
/* [RW 8] The maximum number of blocks in Tetris Buffer that can be
/* [RW 3] page size in L2P table for QM module; -4k; -8k; -16k; -32k; -64k;
-128k */
#define PXP2_REG_RQ_QM_P_SIZE 0x120050
-/* [RW 1] 1' indicates that the RBC has finished configurating the PSWRQ */
+/* [RW 1] 1' indicates that the RBC has finished configuring the PSWRQ */
#define PXP2_REG_RQ_RBC_DONE 0x1201b0
/* [RW 3] Max burst size filed for read requests port 0; 000 - 128B;
001:256B; 010: 512B; 11:1K:100:2K; 01:4K */
/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
buffer reaches this number has_payload will be asserted */
#define PXP2_REG_WR_DMAE_MPS 0x1205ec
-/* [RW 10] if Number of entries in dmae fifo will be higer than this
+/* [RW 10] if Number of entries in dmae fifo will be higher than this
threshold then has_payload indication will be asserted; the default value
should be equal to > write MBS size! */
#define PXP2_REG_WR_DMAE_TH 0x120368
/* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
buffer reaches this number has_payload will be asserted */
#define PXP2_REG_WR_TSDM_MPS 0x1205d4
-/* [RW 10] if Number of entries in usdmdp fifo will be higer than this
+/* [RW 10] if Number of entries in usdmdp fifo will be higher than this
threshold then has_payload indication will be asserted; the default value
should be equal to > write MBS size! */
#define PXP2_REG_WR_USDMDP_TH 0x120348
considered zero so practically there are only 20 bits in this register;
queues 63-0 */
#define QM_REG_BASEADDR 0x168900
+/* [RW 32] The base logical address (in bytes) of each physical queue. The
+ index I represents the physical queue number. The 12 lsbs are ignore and
+ considered zero so practically there are only 20 bits in this register;
+ queues 127-64 */
+#define QM_REG_BASEADDR_EXT_A 0x16e100
/* [RW 16] The byte credit cost for each task. This value is for both ports */
#define QM_REG_BYTECRDCOST 0x168234
/* [RW 16] The initial byte credit value for both ports. */
#define QM_REG_QVOQIDX_107 0x16e4b8
#define QM_REG_QVOQIDX_108 0x16e4bc
#define QM_REG_QVOQIDX_109 0x16e4c0
-#define QM_REG_QVOQIDX_100 0x16e49c
-#define QM_REG_QVOQIDX_101 0x16e4a0
-#define QM_REG_QVOQIDX_102 0x16e4a4
-#define QM_REG_QVOQIDX_103 0x16e4a8
-#define QM_REG_QVOQIDX_104 0x16e4ac
-#define QM_REG_QVOQIDX_105 0x16e4b0
-#define QM_REG_QVOQIDX_106 0x16e4b4
-#define QM_REG_QVOQIDX_107 0x16e4b8
-#define QM_REG_QVOQIDX_108 0x16e4bc
-#define QM_REG_QVOQIDX_109 0x16e4c0
#define QM_REG_QVOQIDX_11 0x168120
#define QM_REG_QVOQIDX_110 0x16e4c4
#define QM_REG_QVOQIDX_111 0x16e4c8
#define QM_REG_QVOQIDX_117 0x16e4e0
#define QM_REG_QVOQIDX_118 0x16e4e4
#define QM_REG_QVOQIDX_119 0x16e4e8
-#define QM_REG_QVOQIDX_110 0x16e4c4
-#define QM_REG_QVOQIDX_111 0x16e4c8
-#define QM_REG_QVOQIDX_112 0x16e4cc
-#define QM_REG_QVOQIDX_113 0x16e4d0
-#define QM_REG_QVOQIDX_114 0x16e4d4
-#define QM_REG_QVOQIDX_115 0x16e4d8
-#define QM_REG_QVOQIDX_116 0x16e4dc
-#define QM_REG_QVOQIDX_117 0x16e4e0
-#define QM_REG_QVOQIDX_118 0x16e4e4
-#define QM_REG_QVOQIDX_119 0x16e4e8
#define QM_REG_QVOQIDX_12 0x168124
#define QM_REG_QVOQIDX_120 0x16e4ec
#define QM_REG_QVOQIDX_121 0x16e4f0
#define QM_REG_QVOQIDX_125 0x16e500
#define QM_REG_QVOQIDX_126 0x16e504
#define QM_REG_QVOQIDX_127 0x16e508
-#define QM_REG_QVOQIDX_120 0x16e4ec
-#define QM_REG_QVOQIDX_121 0x16e4f0
-#define QM_REG_QVOQIDX_122 0x16e4f4
-#define QM_REG_QVOQIDX_123 0x16e4f8
-#define QM_REG_QVOQIDX_124 0x16e4fc
-#define QM_REG_QVOQIDX_125 0x16e500
-#define QM_REG_QVOQIDX_126 0x16e504
-#define QM_REG_QVOQIDX_127 0x16e508
#define QM_REG_QVOQIDX_13 0x168128
#define QM_REG_QVOQIDX_14 0x16812c
#define QM_REG_QVOQIDX_15 0x168130
#define QM_REG_QVOQIDX_57 0x1681d8
#define QM_REG_QVOQIDX_58 0x1681dc
#define QM_REG_QVOQIDX_59 0x1681e0
-#define QM_REG_QVOQIDX_50 0x1681bc
-#define QM_REG_QVOQIDX_51 0x1681c0
-#define QM_REG_QVOQIDX_52 0x1681c4
-#define QM_REG_QVOQIDX_53 0x1681c8
-#define QM_REG_QVOQIDX_54 0x1681cc
-#define QM_REG_QVOQIDX_55 0x1681d0
-#define QM_REG_QVOQIDX_56 0x1681d4
-#define QM_REG_QVOQIDX_57 0x1681d8
-#define QM_REG_QVOQIDX_58 0x1681dc
-#define QM_REG_QVOQIDX_59 0x1681e0
#define QM_REG_QVOQIDX_6 0x16810c
#define QM_REG_QVOQIDX_60 0x1681e4
#define QM_REG_QVOQIDX_61 0x1681e8
#define QM_REG_QVOQIDX_63 0x1681f0
#define QM_REG_QVOQIDX_64 0x16e40c
#define QM_REG_QVOQIDX_65 0x16e410
-#define QM_REG_QVOQIDX_66 0x16e414
-#define QM_REG_QVOQIDX_67 0x16e418
-#define QM_REG_QVOQIDX_68 0x16e41c
-#define QM_REG_QVOQIDX_69 0x16e420
-#define QM_REG_QVOQIDX_60 0x1681e4
-#define QM_REG_QVOQIDX_61 0x1681e8
-#define QM_REG_QVOQIDX_62 0x1681ec
-#define QM_REG_QVOQIDX_63 0x1681f0
-#define QM_REG_QVOQIDX_64 0x16e40c
-#define QM_REG_QVOQIDX_65 0x16e410
#define QM_REG_QVOQIDX_69 0x16e420
#define QM_REG_QVOQIDX_7 0x168110
#define QM_REG_QVOQIDX_70 0x16e424
#define QM_REG_QVOQIDX_77 0x16e440
#define QM_REG_QVOQIDX_78 0x16e444
#define QM_REG_QVOQIDX_79 0x16e448
-#define QM_REG_QVOQIDX_70 0x16e424
-#define QM_REG_QVOQIDX_71 0x16e428
-#define QM_REG_QVOQIDX_72 0x16e42c
-#define QM_REG_QVOQIDX_73 0x16e430
-#define QM_REG_QVOQIDX_74 0x16e434
-#define QM_REG_QVOQIDX_75 0x16e438
-#define QM_REG_QVOQIDX_76 0x16e43c
-#define QM_REG_QVOQIDX_77 0x16e440
-#define QM_REG_QVOQIDX_78 0x16e444
-#define QM_REG_QVOQIDX_79 0x16e448
#define QM_REG_QVOQIDX_8 0x168114
#define QM_REG_QVOQIDX_80 0x16e44c
#define QM_REG_QVOQIDX_81 0x16e450
-#define QM_REG_QVOQIDX_82 0x16e454
-#define QM_REG_QVOQIDX_83 0x16e458
-#define QM_REG_QVOQIDX_84 0x16e45c
-#define QM_REG_QVOQIDX_85 0x16e460
-#define QM_REG_QVOQIDX_86 0x16e464
-#define QM_REG_QVOQIDX_87 0x16e468
-#define QM_REG_QVOQIDX_88 0x16e46c
-#define QM_REG_QVOQIDX_89 0x16e470
-#define QM_REG_QVOQIDX_80 0x16e44c
-#define QM_REG_QVOQIDX_81 0x16e450
#define QM_REG_QVOQIDX_85 0x16e460
#define QM_REG_QVOQIDX_86 0x16e464
#define QM_REG_QVOQIDX_87 0x16e468
#define QM_REG_QVOQIDX_97 0x16e490
#define QM_REG_QVOQIDX_98 0x16e494
#define QM_REG_QVOQIDX_99 0x16e498
-#define QM_REG_QVOQIDX_90 0x16e474
-#define QM_REG_QVOQIDX_91 0x16e478
-#define QM_REG_QVOQIDX_92 0x16e47c
-#define QM_REG_QVOQIDX_93 0x16e480
-#define QM_REG_QVOQIDX_94 0x16e484
-#define QM_REG_QVOQIDX_95 0x16e488
-#define QM_REG_QVOQIDX_96 0x16e48c
-#define QM_REG_QVOQIDX_97 0x16e490
-#define QM_REG_QVOQIDX_98 0x16e494
-#define QM_REG_QVOQIDX_99 0x16e498
/* [RW 1] Initialization bit command */
#define QM_REG_SOFT_RESET 0x168428
/* [RW 8] The credit cost per every task in the QM. A value per each VOQ */
#define QM_REG_TASKCRDCOST_0 0x16809c
#define QM_REG_TASKCRDCOST_1 0x1680a0
-#define QM_REG_TASKCRDCOST_10 0x1680c4
-#define QM_REG_TASKCRDCOST_11 0x1680c8
#define QM_REG_TASKCRDCOST_2 0x1680a4
#define QM_REG_TASKCRDCOST_4 0x1680ac
#define QM_REG_TASKCRDCOST_5 0x1680b0
/* [R 16] The credit value for each VOQ */
#define QM_REG_VOQCREDIT_0 0x1682d0
#define QM_REG_VOQCREDIT_1 0x1682d4
-#define QM_REG_VOQCREDIT_10 0x1682f8
-#define QM_REG_VOQCREDIT_11 0x1682fc
#define QM_REG_VOQCREDIT_4 0x1682e0
/* [RW 16] The credit value that if above the QM is considered almost full */
#define QM_REG_VOQCREDITAFULLTHR 0x168090
/* [RW 16] The init and maximum credit for each VoQ */
#define QM_REG_VOQINITCREDIT_0 0x168060
#define QM_REG_VOQINITCREDIT_1 0x168064
-#define QM_REG_VOQINITCREDIT_10 0x168088
-#define QM_REG_VOQINITCREDIT_11 0x16808c
#define QM_REG_VOQINITCREDIT_2 0x168068
#define QM_REG_VOQINITCREDIT_4 0x168070
#define QM_REG_VOQINITCREDIT_5 0x168074
/* [RW 1] The port of which VOQ belongs */
#define QM_REG_VOQPORT_0 0x1682a0
#define QM_REG_VOQPORT_1 0x1682a4
-#define QM_REG_VOQPORT_10 0x1682c8
-#define QM_REG_VOQPORT_11 0x1682cc
#define QM_REG_VOQPORT_2 0x1682a8
/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
#define QM_REG_VOQQMASK_0_LSB 0x168240
#define QM_REG_WRRWEIGHTS_0 0x16880c
#define QM_REG_WRRWEIGHTS_1 0x168810
#define QM_REG_WRRWEIGHTS_10 0x168814
-#define QM_REG_WRRWEIGHTS_10_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_11 0x168818
-#define QM_REG_WRRWEIGHTS_11_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_12 0x16881c
-#define QM_REG_WRRWEIGHTS_12_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_13 0x168820
-#define QM_REG_WRRWEIGHTS_13_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_14 0x168824
-#define QM_REG_WRRWEIGHTS_14_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_15 0x168828
-#define QM_REG_WRRWEIGHTS_15_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_16 0x16e000
-#define QM_REG_WRRWEIGHTS_16_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_17 0x16e004
-#define QM_REG_WRRWEIGHTS_17_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_18 0x16e008
-#define QM_REG_WRRWEIGHTS_18_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_19 0x16e00c
-#define QM_REG_WRRWEIGHTS_19_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_10 0x168814
#define QM_REG_WRRWEIGHTS_11 0x168818
#define QM_REG_WRRWEIGHTS_12 0x16881c
#define QM_REG_WRRWEIGHTS_13 0x168820
#define QM_REG_WRRWEIGHTS_19 0x16e00c
#define QM_REG_WRRWEIGHTS_2 0x16882c
#define QM_REG_WRRWEIGHTS_20 0x16e010
-#define QM_REG_WRRWEIGHTS_20_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_21 0x16e014
-#define QM_REG_WRRWEIGHTS_21_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_22 0x16e018
-#define QM_REG_WRRWEIGHTS_22_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_23 0x16e01c
-#define QM_REG_WRRWEIGHTS_23_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_24 0x16e020
-#define QM_REG_WRRWEIGHTS_24_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_25 0x16e024
-#define QM_REG_WRRWEIGHTS_25_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_26 0x16e028
-#define QM_REG_WRRWEIGHTS_26_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_27 0x16e02c
-#define QM_REG_WRRWEIGHTS_27_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_28 0x16e030
-#define QM_REG_WRRWEIGHTS_28_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_29 0x16e034
-#define QM_REG_WRRWEIGHTS_29_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_20 0x16e010
#define QM_REG_WRRWEIGHTS_21 0x16e014
#define QM_REG_WRRWEIGHTS_22 0x16e018
#define QM_REG_WRRWEIGHTS_23 0x16e01c
#define QM_REG_WRRWEIGHTS_29 0x16e034
#define QM_REG_WRRWEIGHTS_3 0x168830
#define QM_REG_WRRWEIGHTS_30 0x16e038
-#define QM_REG_WRRWEIGHTS_30_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_31 0x16e03c
-#define QM_REG_WRRWEIGHTS_31_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_30 0x16e038
#define QM_REG_WRRWEIGHTS_31 0x16e03c
#define QM_REG_WRRWEIGHTS_4 0x168834
#define QM_REG_WRRWEIGHTS_5 0x168838
#define QM_REG_WRRWEIGHTS_9 0x168848
/* [R 6] Keep the fill level of the fifo from write client 1 */
#define QM_REG_XQM_WRC_FIFOLVL 0x168000
-#define BRB1_BRB1_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
-#define BRB1_BRB1_INT_STS_REG_ADDRESS_ERROR_SIZE 0
-#define BRB1_BRB1_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
-#define BRB1_BRB1_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
-#define BRB1_BRB1_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
-#define BRB1_BRB1_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
-#define BRB1_BRB1_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
-#define BRB1_BRB1_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
-#define CCM_CCM_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
-#define CCM_CCM_INT_STS_REG_ADDRESS_ERROR_SIZE 0
-#define CCM_CCM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
-#define CCM_CCM_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
-#define CCM_CCM_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
-#define CCM_CCM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
-#define CCM_CCM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
-#define CCM_CCM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
-#define CDU_CDU_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
-#define CDU_CDU_INT_STS_REG_ADDRESS_ERROR_SIZE 0
-#define CDU_CDU_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
-#define CDU_CDU_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
-#define CDU_CDU_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
-#define CDU_CDU_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
-#define CDU_CDU_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
-#define CDU_CDU_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
-#define CFC_CFC_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
-#define CFC_CFC_INT_STS_REG_ADDRESS_ERROR_SIZE 0
-#define CFC_CFC_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
-#define CFC_CFC_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
-#define CFC_CFC_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
-#define CFC_CFC_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
-#define CFC_CFC_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
-#define CFC_CFC_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
-#define CSDM_CSDM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
-#define CSDM_CSDM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
-#define CSDM_CSDM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define CSDM_CSDM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
-#define CSDM_CSDM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define CSDM_CSDM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
-#define CSDM_CSDM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
-#define CSDM_CSDM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
-#define CSEM_CSEM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
-#define CSEM_CSEM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
-#define CSEM_CSEM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define CSEM_CSEM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
-#define CSEM_CSEM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define CSEM_CSEM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
-#define CSEM_CSEM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
-#define CSEM_CSEM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
-#define DBG_DBG_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
-#define DBG_DBG_INT_STS_REG_ADDRESS_ERROR_SIZE 0
-#define DBG_DBG_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
-#define DBG_DBG_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
-#define DBG_DBG_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
-#define DBG_DBG_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
-#define DBG_DBG_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
-#define DBG_DBG_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
-#define DMAE_DMAE_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
-#define DMAE_DMAE_INT_STS_REG_ADDRESS_ERROR_SIZE 0
-#define DMAE_DMAE_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
-#define DMAE_DMAE_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
-#define DMAE_DMAE_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
-#define DMAE_DMAE_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
-#define DMAE_DMAE_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
-#define DMAE_DMAE_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
-#define DORQ_DORQ_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
-#define DORQ_DORQ_INT_STS_REG_ADDRESS_ERROR_SIZE 0
-#define DORQ_DORQ_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
-#define DORQ_DORQ_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
-#define DORQ_DORQ_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
-#define DORQ_DORQ_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
-#define DORQ_DORQ_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
-#define DORQ_DORQ_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
-#define HC_HC_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
-#define HC_HC_INT_STS_REG_ADDRESS_ERROR_SIZE 0
-#define HC_HC_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
-#define HC_HC_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
-#define HC_HC_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
-#define HC_HC_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
-#define HC_HC_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
-#define HC_HC_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
-#define MISC_MISC_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
-#define MISC_MISC_INT_STS_REG_ADDRESS_ERROR_SIZE 0
-#define MISC_MISC_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
-#define MISC_MISC_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
-#define MISC_MISC_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
-#define MISC_MISC_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
-#define MISC_MISC_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
-#define MISC_MISC_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
-#define NIG_NIG_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
-#define NIG_NIG_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
-#define NIG_NIG_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define NIG_NIG_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
-#define NIG_NIG_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define NIG_NIG_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
-#define NIG_NIG_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
-#define NIG_NIG_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
-#define PBF_PBF_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
-#define PBF_PBF_INT_STS_REG_ADDRESS_ERROR_SIZE 0
-#define PBF_PBF_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
-#define PBF_PBF_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
-#define PBF_PBF_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
-#define PBF_PBF_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
-#define PBF_PBF_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
-#define PBF_PBF_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
-#define PB_PB_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
-#define PB_PB_INT_STS_REG_ADDRESS_ERROR_SIZE 0
-#define PB_PB_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
-#define PB_PB_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
-#define PB_PB_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
-#define PB_PB_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
-#define PB_PB_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
-#define PB_PB_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
-#define PRS_PRS_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
-#define PRS_PRS_INT_STS_REG_ADDRESS_ERROR_SIZE 0
-#define PRS_PRS_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
-#define PRS_PRS_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
-#define PRS_PRS_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
-#define PRS_PRS_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
-#define PRS_PRS_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
-#define PRS_PRS_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
-#define PXP2_PXP2_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
-#define PXP2_PXP2_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
-#define PXP2_PXP2_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define PXP2_PXP2_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
-#define PXP2_PXP2_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define PXP2_PXP2_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
-#define PXP2_PXP2_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
-#define PXP2_PXP2_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
-#define PXP_PXP_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
-#define PXP_PXP_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
-#define PXP_PXP_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define PXP_PXP_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
-#define PXP_PXP_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define PXP_PXP_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
-#define PXP_PXP_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
-#define PXP_PXP_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
-#define QM_QM_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
-#define QM_QM_INT_STS_REG_ADDRESS_ERROR_SIZE 0
-#define QM_QM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
-#define QM_QM_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
-#define QM_QM_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
-#define QM_QM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
-#define QM_QM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
-#define QM_QM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
-#define SEM_FAST_SEM_FAST_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
-#define SEM_FAST_SEM_FAST_INT_STS_REG_ADDRESS_ERROR_SIZE 0
-#define SEM_FAST_SEM_FAST_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
-#define SEM_FAST_SEM_FAST_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
-#define SEM_FAST_SEM_FAST_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
-#define SEM_FAST_SEM_FAST_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
-#define SEM_FAST_SEM_FAST_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
-#define SEM_FAST_SEM_FAST_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
-#define SRC_SRC_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
-#define SRC_SRC_INT_STS_REG_ADDRESS_ERROR_SIZE 0
-#define SRC_SRC_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
-#define SRC_SRC_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
-#define SRC_SRC_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
-#define SRC_SRC_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
-#define SRC_SRC_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
-#define SRC_SRC_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
-#define TCM_TCM_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
-#define TCM_TCM_INT_STS_REG_ADDRESS_ERROR_SIZE 0
-#define TCM_TCM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
-#define TCM_TCM_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
-#define TCM_TCM_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
-#define TCM_TCM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
-#define TCM_TCM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
-#define TCM_TCM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
-#define TM_TM_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
-#define TM_TM_INT_STS_REG_ADDRESS_ERROR_SIZE 0
-#define TM_TM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
-#define TM_TM_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
-#define TM_TM_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
-#define TM_TM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
-#define TM_TM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
-#define TM_TM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
-#define TSDM_TSDM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
-#define TSDM_TSDM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
-#define TSDM_TSDM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define TSDM_TSDM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
-#define TSDM_TSDM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define TSDM_TSDM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
-#define TSDM_TSDM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
-#define TSDM_TSDM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
-#define TSEM_TSEM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
-#define TSEM_TSEM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
-#define TSEM_TSEM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define TSEM_TSEM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
-#define TSEM_TSEM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define TSEM_TSEM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
-#define TSEM_TSEM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
-#define TSEM_TSEM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
-#define UCM_UCM_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
-#define UCM_UCM_INT_STS_REG_ADDRESS_ERROR_SIZE 0
-#define UCM_UCM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
-#define UCM_UCM_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
-#define UCM_UCM_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
-#define UCM_UCM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
-#define UCM_UCM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
-#define UCM_UCM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
-#define USDM_USDM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
-#define USDM_USDM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
-#define USDM_USDM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define USDM_USDM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
-#define USDM_USDM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define USDM_USDM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
-#define USDM_USDM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
-#define USDM_USDM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
-#define USEM_USEM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
-#define USEM_USEM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
-#define USEM_USEM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define USEM_USEM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
-#define USEM_USEM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define USEM_USEM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
-#define USEM_USEM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
-#define USEM_USEM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
-#define XCM_XCM_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
-#define XCM_XCM_INT_STS_REG_ADDRESS_ERROR_SIZE 0
-#define XCM_XCM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
-#define XCM_XCM_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
-#define XCM_XCM_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
-#define XCM_XCM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
-#define XCM_XCM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
-#define XCM_XCM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
-#define XSDM_XSDM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
-#define XSDM_XSDM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
-#define XSDM_XSDM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define XSDM_XSDM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
-#define XSDM_XSDM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define XSDM_XSDM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
-#define XSDM_XSDM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
-#define XSDM_XSDM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
-#define XSEM_XSEM_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
-#define XSEM_XSEM_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
-#define XSEM_XSEM_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define XSEM_XSEM_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
-#define XSEM_XSEM_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
-#define XSEM_XSEM_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
-#define XSEM_XSEM_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
-#define XSEM_XSEM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
-#define CFC_DEBUG1_REG_WRITE_AC (0x1<<4)
-#define CFC_DEBUG1_REG_WRITE_AC_SIZE 4
-/* [R 1] debug only: This bit indicates wheter indicates that external
- buffer was wrapped (oldest data was thrown); Relevant only when
- ~dbg_registers_debug_target=2 (PCI) & ~dbg_registers_full_mode=1 (wrap); */
-#define DBG_REG_WRAP_ON_EXT_BUFFER 0xc124
-#define DBG_REG_WRAP_ON_EXT_BUFFER_SIZE 1
-/* [R 1] debug only: This bit indicates wheter the internal buffer was
- wrapped (oldest data was thrown) Relevant only when
- ~dbg_registers_debug_target=0 (internal buffer) */
-#define DBG_REG_WRAP_ON_INT_BUFFER 0xc128
-#define DBG_REG_WRAP_ON_INT_BUFFER_SIZE 1
-#define QM_QM_PRTY_STS_REG_WRBUFF (0x1<<8)
-#define QM_QM_PRTY_STS_REG_WRBUFF_SIZE 8
-#define QM_QM_PRTY_STS_CLR_REG_WRBUFF (0x1<<8)
-#define QM_QM_PRTY_STS_CLR_REG_WRBUFF_SIZE 8
-#define QM_QM_PRTY_STS_WR_REG_WRBUFF (0x1<<8)
-#define QM_QM_PRTY_STS_WR_REG_WRBUFF_SIZE 8
-#define QM_QM_PRTY_MASK_REG_WRBUFF (0x1<<8)
-#define QM_QM_PRTY_MASK_REG_WRBUFF_SIZE 8
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_0 0x16880c
-#define QM_REG_WRRWEIGHTS_0_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_1 0x168810
-#define QM_REG_WRRWEIGHTS_1_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_10 0x168814
-#define QM_REG_WRRWEIGHTS_10_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_11 0x168818
-#define QM_REG_WRRWEIGHTS_11_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_12 0x16881c
-#define QM_REG_WRRWEIGHTS_12_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_13 0x168820
-#define QM_REG_WRRWEIGHTS_13_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_14 0x168824
-#define QM_REG_WRRWEIGHTS_14_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_15 0x168828
-#define QM_REG_WRRWEIGHTS_15_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_2 0x16882c
-#define QM_REG_WRRWEIGHTS_2_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_3 0x168830
-#define QM_REG_WRRWEIGHTS_3_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_4 0x168834
-#define QM_REG_WRRWEIGHTS_4_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_5 0x168838
-#define QM_REG_WRRWEIGHTS_5_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_6 0x16883c
-#define QM_REG_WRRWEIGHTS_6_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_7 0x168840
-#define QM_REG_WRRWEIGHTS_7_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_8 0x168844
-#define QM_REG_WRRWEIGHTS_8_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_9 0x168848
-#define QM_REG_WRRWEIGHTS_9_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_16 0x16e000
-#define QM_REG_WRRWEIGHTS_16_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_17 0x16e004
-#define QM_REG_WRRWEIGHTS_17_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_18 0x16e008
-#define QM_REG_WRRWEIGHTS_18_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_19 0x16e00c
-#define QM_REG_WRRWEIGHTS_19_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_20 0x16e010
-#define QM_REG_WRRWEIGHTS_20_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_21 0x16e014
-#define QM_REG_WRRWEIGHTS_21_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_22 0x16e018
-#define QM_REG_WRRWEIGHTS_22_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_23 0x16e01c
-#define QM_REG_WRRWEIGHTS_23_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_24 0x16e020
-#define QM_REG_WRRWEIGHTS_24_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_25 0x16e024
-#define QM_REG_WRRWEIGHTS_25_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_26 0x16e028
-#define QM_REG_WRRWEIGHTS_26_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_27 0x16e02c
-#define QM_REG_WRRWEIGHTS_27_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_28 0x16e030
-#define QM_REG_WRRWEIGHTS_28_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_29 0x16e034
-#define QM_REG_WRRWEIGHTS_29_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_30 0x16e038
-#define QM_REG_WRRWEIGHTS_30_SIZE 1
-/* [RW 32] Wrr weights */
-#define QM_REG_WRRWEIGHTS_31 0x16e03c
-#define QM_REG_WRRWEIGHTS_31_SIZE 1
#define SRC_REG_COUNTFREE0 0x40500
/* [RW 1] If clr the searcher is compatible to E1 A0 - support only two
ports. If set the searcher support 8 functions. */
#define SRC_REG_KEYRSS0_0 0x40408
#define SRC_REG_KEYRSS0_7 0x40424
#define SRC_REG_KEYRSS1_9 0x40454
+#define SRC_REG_KEYSEARCH_0 0x40458
+#define SRC_REG_KEYSEARCH_1 0x4045c
+#define SRC_REG_KEYSEARCH_2 0x40460
+#define SRC_REG_KEYSEARCH_3 0x40464
+#define SRC_REG_KEYSEARCH_4 0x40468
+#define SRC_REG_KEYSEARCH_5 0x4046c
+#define SRC_REG_KEYSEARCH_6 0x40470
+#define SRC_REG_KEYSEARCH_7 0x40474
+#define SRC_REG_KEYSEARCH_8 0x40478
+#define SRC_REG_KEYSEARCH_9 0x4047c
#define SRC_REG_LASTFREE0 0x40530
#define SRC_REG_NUMBER_HASH_BITS0 0x40400
/* [RW 1] Reset internal state machines. */
/* [RC 1] Message length mismatch (relative to last indication) at the In#9
interface. */
#define TCM_REG_CSEM_LENGTH_MIS 0x50174
+/* [RW 3] The weight of the input csem in the WRR mechanism. 0 stands for
+ weight 8 (the most prioritised); 1 stands for weight 1(least
+ prioritised); 2 stands for weight 2; tc. */
+#define TCM_REG_CSEM_WEIGHT 0x500bc
/* [RW 8] The Event ID in case of ErrorFlg is set in the input message. */
#define TCM_REG_ERR_EVNT_ID 0x500a0
/* [RW 28] The CM erroneous header for QM and Timers formatting. */
type (one of 16). */
#define TCM_REG_N_SM_CTX_LD_0 0x50050
#define TCM_REG_N_SM_CTX_LD_1 0x50054
-#define TCM_REG_N_SM_CTX_LD_10 0x50078
-#define TCM_REG_N_SM_CTX_LD_11 0x5007c
-#define TCM_REG_N_SM_CTX_LD_12 0x50080
-#define TCM_REG_N_SM_CTX_LD_13 0x50084
-#define TCM_REG_N_SM_CTX_LD_14 0x50088
-#define TCM_REG_N_SM_CTX_LD_15 0x5008c
#define TCM_REG_N_SM_CTX_LD_2 0x50058
#define TCM_REG_N_SM_CTX_LD_3 0x5005c
#define TCM_REG_N_SM_CTX_LD_4 0x50060
+#define TCM_REG_N_SM_CTX_LD_5 0x50064
/* [RW 1] Input pbf Interface enable. If 0 - the valid input is disregarded;
acknowledge output is deasserted; all other signals are treated as usual;
if 1 - normal activity. */
disregarded; acknowledge output is deasserted; all other signals are
treated as usual; if 1 - normal activity. */
#define TCM_REG_STORM_TCM_IFEN 0x50010
+/* [RW 3] The weight of the STORM input in the WRR mechanism. 0 stands for
+ weight 8 (the most prioritised); 1 stands for weight 1(least
+ prioritised); 2 stands for weight 2; tc. */
+#define TCM_REG_STORM_WEIGHT 0x500ac
/* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded;
acknowledge output is deasserted; all other signals are treated as usual;
if 1 - normal activity. */
disregarded; acknowledge output is deasserted; all other signals are
treated as usual; if 1 - normal activity. */
#define TCM_REG_TM_TCM_IFEN 0x5001c
+/* [RW 3] The weight of the Timers input in the WRR mechanism. 0 stands for
+ weight 8 (the most prioritised); 1 stands for weight 1(least
+ prioritised); 2 stands for weight 2; tc. */
+#define TCM_REG_TM_WEIGHT 0x500d0
/* [RW 6] QM output initial credit. Max credit available - 32.Write writes
the initial credit value; read returns the current value of the credit
counter. Must be initialized to 32 at start-up. */
#define TCM_REG_TQM_INIT_CRD 0x5021c
+/* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0
+ stands for weight 8 (the most prioritised); 1 stands for weight 1(least
+ prioritised); 2 stands for weight 2; tc. */
+#define TCM_REG_TQM_P_WEIGHT 0x500c8
+/* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0
+ stands for weight 8 (the most prioritised); 1 stands for weight 1(least
+ prioritised); 2 stands for weight 2; tc. */
+#define TCM_REG_TQM_S_WEIGHT 0x500cc
/* [RW 28] The CM header value for QM request (primary). */
#define TCM_REG_TQM_TCM_HDR_P 0x50090
/* [RW 28] The CM header value for QM request (secondary). */
/* [RC 1] Message length mismatch (relative to last indication) at the In#8
interface. */
#define TCM_REG_USEM_LENGTH_MIS 0x50170
+/* [RW 3] The weight of the input usem in the WRR mechanism. 0 stands for
+ weight 8 (the most prioritised); 1 stands for weight 1(least
+ prioritised); 2 stands for weight 2; tc. */
+#define TCM_REG_USEM_WEIGHT 0x500b8
/* [RW 21] Indirect access to the descriptor table of the XX protection
mechanism. The fields are: [5:0] - length of the message; 15:6] - message
pointer; 20:16] - next pointer. */
The fields are:[4:0] - tail pointer; [10:5] - Link List size; 15:11] -
header pointer. */
#define TCM_REG_XX_TABLE 0x50240
-/* [RW 4] Load value for for cfc ac credit cnt. */
+/* [RW 4] Load value for cfc ac credit cnt. */
#define TM_REG_CFC_AC_CRDCNT_VAL 0x164208
/* [RW 4] Load value for cfc cld credit cnt. */
#define TM_REG_CFC_CLD_CRDCNT_VAL 0x164210
#define TM_REG_EN_CL1_INPUT 0x16400c
/* [RW 1] Enable client2 input. */
#define TM_REG_EN_CL2_INPUT 0x164010
+#define TM_REG_EN_LINEAR0_TIMER 0x164014
/* [RW 1] Enable real time counter. */
#define TM_REG_EN_REAL_TIME_CNT 0x1640d8
/* [RW 1] Enable for Timers state machines. */
/* [RW 4] Load value for expiration credit cnt. CFC max number of
outstanding load requests for timers (expiration) context loading. */
#define TM_REG_EXP_CRDCNT_VAL 0x164238
+/* [RW 32] Linear0 logic address. */
+#define TM_REG_LIN0_LOGIC_ADDR 0x164240
/* [RW 18] Linear0 Max active cid (in banks of 32 entries). */
#define TM_REG_LIN0_MAX_ACTIVE_CID 0x164048
/* [WB 64] Linear0 phy address. */
#define TM_REG_LIN0_PHY_ADDR 0x164270
+/* [RW 1] Linear0 physical address valid. */
+#define TM_REG_LIN0_PHY_ADDR_VALID 0x164248
+#define TM_REG_LIN0_SCAN_ON 0x1640d0
/* [RW 24] Linear0 array scan timeout. */
#define TM_REG_LIN0_SCAN_TIME 0x16403c
+/* [RW 32] Linear1 logic address. */
+#define TM_REG_LIN1_LOGIC_ADDR 0x164250
/* [WB 64] Linear1 phy address. */
#define TM_REG_LIN1_PHY_ADDR 0x164280
+/* [RW 1] Linear1 physical address valid. */
+#define TM_REG_LIN1_PHY_ADDR_VALID 0x164258
/* [RW 6] Linear timer set_clear fifo threshold. */
#define TM_REG_LIN_SETCLR_FIFO_ALFULL_THR 0x164070
/* [RW 2] Load value for pci arbiter credit cnt. */
#define TM_REG_PCIARB_CRDCNT_VAL 0x164260
-/* [RW 1] Timer software reset - active high. */
-#define TM_REG_TIMER_SOFT_RST 0x164004
/* [RW 20] The amount of hardware cycles for each timer tick. */
#define TM_REG_TIMER_TICK_SIZE 0x16401c
/* [RW 8] Timers Context region. */
#define TM_REG_TM_INT_STS 0x1640f0
/* [RW 8] The event id for aggregated interrupt 0 */
#define TSDM_REG_AGG_INT_EVENT_0 0x42038
+#define TSDM_REG_AGG_INT_EVENT_1 0x4203c
#define TSDM_REG_AGG_INT_EVENT_2 0x42040
-#define TSDM_REG_AGG_INT_EVENT_20 0x42088
-#define TSDM_REG_AGG_INT_EVENT_21 0x4208c
-#define TSDM_REG_AGG_INT_EVENT_22 0x42090
-#define TSDM_REG_AGG_INT_EVENT_23 0x42094
-#define TSDM_REG_AGG_INT_EVENT_24 0x42098
-#define TSDM_REG_AGG_INT_EVENT_25 0x4209c
-#define TSDM_REG_AGG_INT_EVENT_26 0x420a0
-#define TSDM_REG_AGG_INT_EVENT_27 0x420a4
-#define TSDM_REG_AGG_INT_EVENT_28 0x420a8
-#define TSDM_REG_AGG_INT_EVENT_29 0x420ac
#define TSDM_REG_AGG_INT_EVENT_3 0x42044
-#define TSDM_REG_AGG_INT_EVENT_30 0x420b0
-#define TSDM_REG_AGG_INT_EVENT_31 0x420b4
#define TSDM_REG_AGG_INT_EVENT_4 0x42048
+/* [RW 1] The T bit for aggregated interrupt 0 */
+#define TSDM_REG_AGG_INT_T_0 0x420b8
+#define TSDM_REG_AGG_INT_T_1 0x420bc
/* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
#define TSDM_REG_CFC_RSP_START_ADDR 0x42008
/* [RW 16] The maximum value of the competion counter #0 */
/* [RC 1] Set when the message length mismatch (relative to last indication)
at the dorq interface is detected. */
#define UCM_REG_DORQ_LENGTH_MIS 0xe0168
+/* [RW 3] The weight of the input dorq in the WRR mechanism. 0 stands for
+ weight 8 (the most prioritised); 1 stands for weight 1(least
+ prioritised); 2 stands for weight 2; tc. */
+#define UCM_REG_DORQ_WEIGHT 0xe00c0
/* [RW 8] The Event ID in case ErrorFlg input message bit is set. */
#define UCM_REG_ERR_EVNT_ID 0xe00a4
/* [RW 28] The CM erroneous header for QM and Timers formatting. */
connection type (one of 16). */
#define UCM_REG_N_SM_CTX_LD_0 0xe0054
#define UCM_REG_N_SM_CTX_LD_1 0xe0058
-#define UCM_REG_N_SM_CTX_LD_10 0xe007c
-#define UCM_REG_N_SM_CTX_LD_11 0xe0080
-#define UCM_REG_N_SM_CTX_LD_12 0xe0084
-#define UCM_REG_N_SM_CTX_LD_13 0xe0088
-#define UCM_REG_N_SM_CTX_LD_14 0xe008c
-#define UCM_REG_N_SM_CTX_LD_15 0xe0090
#define UCM_REG_N_SM_CTX_LD_2 0xe005c
#define UCM_REG_N_SM_CTX_LD_3 0xe0060
#define UCM_REG_N_SM_CTX_LD_4 0xe0064
disregarded; acknowledge output is deasserted; all other signals are
treated as usual; if 1 - normal activity. */
#define UCM_REG_STORM_UCM_IFEN 0xe0010
+/* [RW 3] The weight of the STORM input in the WRR mechanism. 0 stands for
+ weight 8 (the most prioritised); 1 stands for weight 1(least
+ prioritised); 2 stands for weight 2; tc. */
+#define UCM_REG_STORM_WEIGHT 0xe00b0
/* [RW 4] Timers output initial credit. Max credit available - 15.Write
writes the initial credit value; read returns the current value of the
credit counter. Must be initialized to 4 at start-up. */
disregarded; acknowledge output is deasserted; all other signals are
treated as usual; if 1 - normal activity. */
#define UCM_REG_TM_UCM_IFEN 0xe001c
+/* [RW 3] The weight of the Timers input in the WRR mechanism. 0 stands for
+ weight 8 (the most prioritised); 1 stands for weight 1(least
+ prioritised); 2 stands for weight 2; tc. */
+#define UCM_REG_TM_WEIGHT 0xe00d4
/* [RW 1] Input tsem Interface enable. If 0 - the valid input is
disregarded; acknowledge output is deasserted; all other signals are
treated as usual; if 1 - normal activity. */
stands for weight 8 (the most prioritised); 1 stands for weight 1(least
prioritised); 2 stands for weight 2; tc. */
#define UCM_REG_UQM_P_WEIGHT 0xe00cc
+/* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0
+ stands for weight 8 (the most prioritised); 1 stands for weight 1(least
+ prioritised); 2 stands for weight 2; tc. */
+#define UCM_REG_UQM_S_WEIGHT 0xe00d0
/* [RW 28] The CM header value for QM request (primary). */
#define UCM_REG_UQM_UCM_HDR_P 0xe0094
/* [RW 28] The CM header value for QM request (secondary). */
/* [RC 1] Set when the message length mismatch (relative to last indication)
at the SDM interface is detected. */
#define UCM_REG_USDM_LENGTH_MIS 0xe0158
+/* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands for
+ weight 8 (the most prioritised); 1 stands for weight 1(least
+ prioritised); 2 stands for weight 2; tc. */
+#define UCM_REG_USDM_WEIGHT 0xe00c8
/* [RW 1] Input xsem Interface enable. If 0 - the valid input is
disregarded; acknowledge output is deasserted; all other signals are
treated as usual; if 1 - normal activity. */
/* [RC 1] Set when the message length mismatch (relative to last indication)
at the xsem interface isdetected. */
#define UCM_REG_XSEM_LENGTH_MIS 0xe0164
+/* [RW 3] The weight of the input xsem in the WRR mechanism. 0 stands for
+ weight 8 (the most prioritised); 1 stands for weight 1(least
+ prioritised); 2 stands for weight 2; tc. */
+#define UCM_REG_XSEM_WEIGHT 0xe00bc
/* [RW 20] Indirect access to the descriptor table of the XX protection
mechanism. The fields are:[5:0] - message length; 14:6] - message
pointer; 19:15] - next pointer. */
/* [RW 8] The event id for aggregated interrupt 0 */
#define USDM_REG_AGG_INT_EVENT_0 0xc4038
#define USDM_REG_AGG_INT_EVENT_1 0xc403c
-#define USDM_REG_AGG_INT_EVENT_10 0xc4060
-#define USDM_REG_AGG_INT_EVENT_11 0xc4064
-#define USDM_REG_AGG_INT_EVENT_12 0xc4068
-#define USDM_REG_AGG_INT_EVENT_13 0xc406c
-#define USDM_REG_AGG_INT_EVENT_14 0xc4070
-#define USDM_REG_AGG_INT_EVENT_15 0xc4074
-#define USDM_REG_AGG_INT_EVENT_16 0xc4078
-#define USDM_REG_AGG_INT_EVENT_17 0xc407c
-#define USDM_REG_AGG_INT_EVENT_18 0xc4080
-#define USDM_REG_AGG_INT_EVENT_19 0xc4084
#define USDM_REG_AGG_INT_EVENT_2 0xc4040
-#define USDM_REG_AGG_INT_EVENT_20 0xc4088
-#define USDM_REG_AGG_INT_EVENT_21 0xc408c
-#define USDM_REG_AGG_INT_EVENT_22 0xc4090
-#define USDM_REG_AGG_INT_EVENT_23 0xc4094
-#define USDM_REG_AGG_INT_EVENT_24 0xc4098
-#define USDM_REG_AGG_INT_EVENT_25 0xc409c
-#define USDM_REG_AGG_INT_EVENT_26 0xc40a0
-#define USDM_REG_AGG_INT_EVENT_27 0xc40a4
-#define USDM_REG_AGG_INT_EVENT_28 0xc40a8
-#define USDM_REG_AGG_INT_EVENT_29 0xc40ac
-#define USDM_REG_AGG_INT_EVENT_3 0xc4044
-#define USDM_REG_AGG_INT_EVENT_30 0xc40b0
-#define USDM_REG_AGG_INT_EVENT_31 0xc40b4
#define USDM_REG_AGG_INT_EVENT_4 0xc4048
+#define USDM_REG_AGG_INT_EVENT_5 0xc404c
+#define USDM_REG_AGG_INT_EVENT_6 0xc4050
/* [RW 1] For each aggregated interrupt index whether the mode is normal (0)
or auto-mask-mode (1) */
#define USDM_REG_AGG_INT_MODE_0 0xc41b8
#define USDM_REG_AGG_INT_MODE_1 0xc41bc
-#define USDM_REG_AGG_INT_MODE_10 0xc41e0
-#define USDM_REG_AGG_INT_MODE_11 0xc41e4
-#define USDM_REG_AGG_INT_MODE_12 0xc41e8
-#define USDM_REG_AGG_INT_MODE_13 0xc41ec
-#define USDM_REG_AGG_INT_MODE_14 0xc41f0
-#define USDM_REG_AGG_INT_MODE_15 0xc41f4
-#define USDM_REG_AGG_INT_MODE_16 0xc41f8
-#define USDM_REG_AGG_INT_MODE_17 0xc41fc
-#define USDM_REG_AGG_INT_MODE_18 0xc4200
-#define USDM_REG_AGG_INT_MODE_19 0xc4204
+#define USDM_REG_AGG_INT_MODE_4 0xc41c8
+#define USDM_REG_AGG_INT_MODE_5 0xc41cc
+#define USDM_REG_AGG_INT_MODE_6 0xc41d0
+/* [RW 1] The T bit for aggregated interrupt 5 */
+#define USDM_REG_AGG_INT_T_5 0xc40cc
+#define USDM_REG_AGG_INT_T_6 0xc40d0
/* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
#define USDM_REG_CFC_RSP_START_ADDR 0xc4008
/* [RW 16] The maximum value of the competion counter #0 */
/* [RC 1] Set at message length mismatch (relative to last indication) at
the dorq interface. */
#define XCM_REG_DORQ_LENGTH_MIS 0x20230
+/* [RW 3] The weight of the input dorq in the WRR mechanism. 0 stands for
+ weight 8 (the most prioritised); 1 stands for weight 1(least
+ prioritised); 2 stands for weight 2; tc. */
+#define XCM_REG_DORQ_WEIGHT 0x200cc
/* [RW 8] The Event ID in case the ErrorFlg input message bit is set. */
#define XCM_REG_ERR_EVNT_ID 0x200b0
/* [RW 28] The CM erroneous header for QM and Timers formatting. */
/* [RC 1] Set at message length mismatch (relative to last indication) at
the nig0 interface. */
#define XCM_REG_NIG0_LENGTH_MIS 0x20238
+/* [RW 3] The weight of the input nig0 in the WRR mechanism. 0 stands for
+ weight 8 (the most prioritised); 1 stands for weight 1(least
+ prioritised); 2 stands for weight 2; tc. */
+#define XCM_REG_NIG0_WEIGHT 0x200d4
/* [RW 1] Input nig1 Interface enable. If 0 - the valid input is
disregarded; acknowledge output is deasserted; all other signals are
treated as usual; if 1 - normal activity. */
/* [RC 1] Set at message length mismatch (relative to last indication) at
the nig1 interface. */
#define XCM_REG_NIG1_LENGTH_MIS 0x2023c
-/* [RW 3] The weight of the input nig1 in the WRR mechanism. 0 stands for
- weight 8 (the most prioritised); 1 stands for weight 1(least
- prioritised); 2 stands for weight 2; tc. */
-#define XCM_REG_NIG1_WEIGHT 0x200d8
/* [RW 5] The number of double REG-pairs; loaded from the STORM context and
sent to STORM; for a specific connection type. The double REG-pairs are
used in order to align to STORM context row size of 128 bits. The offset
connection type (one of 16). */
#define XCM_REG_N_SM_CTX_LD_0 0x20060
#define XCM_REG_N_SM_CTX_LD_1 0x20064
-#define XCM_REG_N_SM_CTX_LD_10 0x20088
-#define XCM_REG_N_SM_CTX_LD_11 0x2008c
-#define XCM_REG_N_SM_CTX_LD_12 0x20090
-#define XCM_REG_N_SM_CTX_LD_13 0x20094
-#define XCM_REG_N_SM_CTX_LD_14 0x20098
-#define XCM_REG_N_SM_CTX_LD_15 0x2009c
#define XCM_REG_N_SM_CTX_LD_2 0x20068
#define XCM_REG_N_SM_CTX_LD_3 0x2006c
#define XCM_REG_N_SM_CTX_LD_4 0x20070
writes the initial credit value; read returns the current value of the
credit counter. Must be initialized to 4 at start-up. */
#define XCM_REG_TM_INIT_CRD 0x2041c
+/* [RW 3] The weight of the Timers input in the WRR mechanism. 0 stands for
+ weight 8 (the most prioritised); 1 stands for weight 1(least
+ prioritised); 2 stands for weight 2; tc. */
+#define XCM_REG_TM_WEIGHT 0x200ec
/* [RW 28] The CM header for Timers expiration command. */
#define XCM_REG_TM_XCM_HDR 0x200a8
/* [RW 1] Timers - CM Interface enable. If 0 - the valid input is
stands for weight 8 (the most prioritised); 1 stands for weight 1(least
prioritised); 2 stands for weight 2; tc. */
#define XCM_REG_XQM_P_WEIGHT 0x200e4
+/* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0
+ stands for weight 8 (the most prioritised); 1 stands for weight 1(least
+ prioritised); 2 stands for weight 2; tc. */
+#define XCM_REG_XQM_S_WEIGHT 0x200e8
/* [RW 28] The CM header value for QM request (primary). */
#define XCM_REG_XQM_XCM_HDR_P 0x200a0
/* [RW 28] The CM header value for QM request (secondary). */
#define XSDM_REG_AGG_INT_EVENT_12 0x166068
#define XSDM_REG_AGG_INT_EVENT_13 0x16606c
#define XSDM_REG_AGG_INT_EVENT_14 0x166070
-#define XSDM_REG_AGG_INT_EVENT_15 0x166074
-#define XSDM_REG_AGG_INT_EVENT_16 0x166078
-#define XSDM_REG_AGG_INT_EVENT_17 0x16607c
-#define XSDM_REG_AGG_INT_EVENT_18 0x166080
-#define XSDM_REG_AGG_INT_EVENT_19 0x166084
-#define XSDM_REG_AGG_INT_EVENT_10 0x166060
-#define XSDM_REG_AGG_INT_EVENT_11 0x166064
-#define XSDM_REG_AGG_INT_EVENT_12 0x166068
#define XSDM_REG_AGG_INT_EVENT_2 0x166040
-#define XSDM_REG_AGG_INT_EVENT_20 0x166088
-#define XSDM_REG_AGG_INT_EVENT_21 0x16608c
-#define XSDM_REG_AGG_INT_EVENT_22 0x166090
-#define XSDM_REG_AGG_INT_EVENT_23 0x166094
-#define XSDM_REG_AGG_INT_EVENT_24 0x166098
-#define XSDM_REG_AGG_INT_EVENT_25 0x16609c
-#define XSDM_REG_AGG_INT_EVENT_26 0x1660a0
-#define XSDM_REG_AGG_INT_EVENT_27 0x1660a4
-#define XSDM_REG_AGG_INT_EVENT_28 0x1660a8
-#define XSDM_REG_AGG_INT_EVENT_29 0x1660ac
#define XSDM_REG_AGG_INT_EVENT_3 0x166044
-#define XSDM_REG_AGG_INT_EVENT_30 0x1660b0
-#define XSDM_REG_AGG_INT_EVENT_31 0x1660b4
#define XSDM_REG_AGG_INT_EVENT_4 0x166048
#define XSDM_REG_AGG_INT_EVENT_5 0x16604c
#define XSDM_REG_AGG_INT_EVENT_6 0x166050
or auto-mask-mode (1) */
#define XSDM_REG_AGG_INT_MODE_0 0x1661b8
#define XSDM_REG_AGG_INT_MODE_1 0x1661bc
-#define XSDM_REG_AGG_INT_MODE_10 0x1661e0
-#define XSDM_REG_AGG_INT_MODE_11 0x1661e4
-#define XSDM_REG_AGG_INT_MODE_12 0x1661e8
-#define XSDM_REG_AGG_INT_MODE_13 0x1661ec
-#define XSDM_REG_AGG_INT_MODE_14 0x1661f0
-#define XSDM_REG_AGG_INT_MODE_15 0x1661f4
-#define XSDM_REG_AGG_INT_MODE_16 0x1661f8
-#define XSDM_REG_AGG_INT_MODE_17 0x1661fc
-#define XSDM_REG_AGG_INT_MODE_18 0x166200
-#define XSDM_REG_AGG_INT_MODE_19 0x166204
/* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
#define XSDM_REG_CFC_RSP_START_ADDR 0x166008
/* [RW 16] The maximum value of the competion counter #0 */
#define MCPR_NVM_COMMAND_FIRST (1L<<7)
#define MCPR_NVM_COMMAND_LAST (1L<<8)
#define MCPR_NVM_COMMAND_WR (1L<<5)
-#define MCPR_NVM_COMMAND_WREN (1L<<16)
-#define MCPR_NVM_COMMAND_WREN_BITSHIFT 16
-#define MCPR_NVM_COMMAND_WRDI (1L<<17)
-#define MCPR_NVM_COMMAND_WRDI_BITSHIFT 17
#define MCPR_NVM_SW_ARB_ARB_ARB1 (1L<<9)
#define MCPR_NVM_SW_ARB_ARB_REQ_CLR1 (1L<<5)
#define MCPR_NVM_SW_ARB_ARB_REQ_SET1 (1L<<1)
#define EMAC_RX_MODE_FLOW_EN (1L<<2)
#define EMAC_RX_MODE_KEEP_VLAN_TAG (1L<<10)
#define EMAC_RX_MODE_PROMISCUOUS (1L<<8)
+#define EMAC_RX_MODE_RESET (1L<<0)
#define EMAC_RX_MTU_SIZE_JUMBO_ENA (1L<<31)
#define EMAC_TX_MODE_EXT_PAUSE_EN (1L<<3)
+#define EMAC_TX_MODE_FLOW_EN (1L<<4)
+#define EMAC_TX_MODE_RESET (1L<<0)
#define MISC_REGISTERS_GPIO_0 0
#define MISC_REGISTERS_GPIO_1 1
#define MISC_REGISTERS_GPIO_2 2
#define MISC_REGISTERS_GPIO_FLOAT_POS 24
#define MISC_REGISTERS_GPIO_HIGH 1
#define MISC_REGISTERS_GPIO_INPUT_HI_Z 2
+#define MISC_REGISTERS_GPIO_INT_CLR_POS 24
+#define MISC_REGISTERS_GPIO_INT_OUTPUT_CLR 0
+#define MISC_REGISTERS_GPIO_INT_OUTPUT_SET 1
+#define MISC_REGISTERS_GPIO_INT_SET_POS 16
#define MISC_REGISTERS_GPIO_LOW 0
#define MISC_REGISTERS_GPIO_OUTPUT_HIGH 1
#define MISC_REGISTERS_GPIO_OUTPUT_LOW 0
#define MISC_REGISTERS_SPIO_7 7
#define MISC_REGISTERS_SPIO_CLR_POS 16
#define MISC_REGISTERS_SPIO_FLOAT (0xffL<<24)
-#define GRC_MISC_REGISTERS_SPIO_FLOAT7 0x80000000
-#define GRC_MISC_REGISTERS_SPIO_FLOAT6 0x40000000
-#define GRC_MISC_REGISTERS_SPIO_FLOAT5 0x20000000
-#define GRC_MISC_REGISTERS_SPIO_FLOAT4 0x10000000
#define MISC_REGISTERS_SPIO_FLOAT_POS 24
#define MISC_REGISTERS_SPIO_INPUT_HI_Z 2
#define MISC_REGISTERS_SPIO_INT_OLD_SET_POS 16
#define MISC_REGISTERS_SPIO_OUTPUT_LOW 0
#define MISC_REGISTERS_SPIO_SET_POS 8
#define HW_LOCK_MAX_RESOURCE_VALUE 31
-#define HW_LOCK_RESOURCE_8072_MDIO 0
#define HW_LOCK_RESOURCE_GPIO 1
+#define HW_LOCK_RESOURCE_MDIO 0
#define HW_LOCK_RESOURCE_PORT0_ATT_MASK 3
#define HW_LOCK_RESOURCE_SPIO 2
#define HW_LOCK_RESOURCE_UNDI 5
+#define PRS_FLAG_OVERETH_IPV4 1
#define AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR (1<<18)
#define AEU_INPUTS_ATTN_BITS_CCM_HW_INTERRUPT (1<<31)
#define AEU_INPUTS_ATTN_BITS_CDU_HW_INTERRUPT (1<<9)
#define AEU_INPUTS_ATTN_BITS_DMAE_HW_INTERRUPT (1<<11)
#define AEU_INPUTS_ATTN_BITS_DOORBELLQ_HW_INTERRUPT (1<<13)
#define AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR (1<<12)
+#define AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_0 (1<<5)
+#define AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_1 (1<<9)
#define AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR (1<<12)
#define AEU_INPUTS_ATTN_BITS_MISC_HW_INTERRUPT (1<<15)
#define AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR (1<<14)
#define LATCHED_ATTN_SCPAD_PARITY_MCP 33
#define GENERAL_ATTEN_WORD(atten_name) ((94 + atten_name) / 32)
-#define GENERAL_ATTEN_OFFSET(atten_name) (1 << ((94 + atten_name) % 32))
+#define GENERAL_ATTEN_OFFSET(atten_name)\
+ (1UL << ((94 + atten_name) % 32))
/*
* This file defines GRC base address for every block.
* This file is included by chipsim, asm microcode and cpp microcode.
#define PCICFG_COMMAND_INT_DISABLE (1<<10)
#define PCICFG_COMMAND_RESERVED (0x1f<<11)
#define PCICFG_STATUS_OFFSET 0x06
-#define PCICFG_REVESION_ID 0x08
+#define PCICFG_REVESION_ID_OFFSET 0x08
#define PCICFG_CACHE_LINE_SIZE 0x0c
#define PCICFG_LATENCY_TIMER 0x0d
#define PCICFG_BAR_1_LOW 0x10
#define PCICFG_PM_CSR_STATE (0x3<<0)
#define PCICFG_PM_CSR_PME_ENABLE (1<<8)
#define PCICFG_PM_CSR_PME_STATUS (1<<15)
+#define PCICFG_MSI_CAP_ID_OFFSET 0x58
+#define PCICFG_MSI_CONTROL_ENABLE (0x1<<16)
+#define PCICFG_MSI_CONTROL_MCAP (0x7<<17)
+#define PCICFG_MSI_CONTROL_MENA (0x7<<20)
+#define PCICFG_MSI_CONTROL_64_BIT_ADDR_CAP (0x1<<23)
+#define PCICFG_MSI_CONTROL_MSI_PVMASK_CAPABLE (0x1<<24)
#define PCICFG_GRC_ADDRESS 0x78
#define PCICFG_GRC_DATA 0x80
+#define PCICFG_MSIX_CAP_ID_OFFSET 0xa0
+#define PCICFG_MSIX_CONTROL_TABLE_SIZE (0x7ff<<16)
+#define PCICFG_MSIX_CONTROL_RESERVED (0x7<<27)
+#define PCICFG_MSIX_CONTROL_FUNC_MASK (0x1<<30)
+#define PCICFG_MSIX_CONTROL_MSIX_ENABLE (0x1<<31)
+
#define PCICFG_DEVICE_CONTROL 0xb4
+#define PCICFG_DEVICE_STATUS 0xb6
+#define PCICFG_DEVICE_STATUS_CORR_ERR_DET (1<<0)
+#define PCICFG_DEVICE_STATUS_NON_FATAL_ERR_DET (1<<1)
+#define PCICFG_DEVICE_STATUS_FATAL_ERR_DET (1<<2)
+#define PCICFG_DEVICE_STATUS_UNSUP_REQ_DET (1<<3)
+#define PCICFG_DEVICE_STATUS_AUX_PWR_DET (1<<4)
+#define PCICFG_DEVICE_STATUS_NO_PEND (1<<5)
#define PCICFG_LINK_CONTROL 0xbc
#define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KR 0x0080
#define MDIO_REG_BANK_RX0 0x80b0
+#define MDIO_RX0_RX_STATUS 0x10
+#define MDIO_RX0_RX_STATUS_SIGDET 0x8000
+#define MDIO_RX0_RX_STATUS_RX_SEQ_DONE 0x1000
#define MDIO_RX0_RX_EQ_BOOST 0x1c
#define MDIO_RX0_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
#define MDIO_RX0_RX_EQ_BOOST_OFFSET_CTRL 0x10
#define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1
#define MDIO_TX0_TX_DRIVER_ICBUF1T 1
+#define MDIO_REG_BANK_TX1 0x8070
+#define MDIO_TX1_TX_DRIVER 0x17
+#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000
+#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12
+#define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00
+#define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8
+#define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0
+#define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4
+#define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e
+#define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1
+#define MDIO_TX0_TX_DRIVER_ICBUF1T 1
+
+#define MDIO_REG_BANK_TX2 0x8080
+#define MDIO_TX2_TX_DRIVER 0x17
+#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000
+#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12
+#define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00
+#define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8
+#define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0
+#define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4
+#define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e
+#define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1
+#define MDIO_TX0_TX_DRIVER_ICBUF1T 1
+
+#define MDIO_REG_BANK_TX3 0x8090
+#define MDIO_TX3_TX_DRIVER 0x17
+#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000
+#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12
+#define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00
+#define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8
+#define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0
+#define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4
+#define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e
+#define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1
+#define MDIO_TX0_TX_DRIVER_ICBUF1T 1
+
#define MDIO_REG_BANK_XGXS_BLOCK0 0x8000
#define MDIO_BLOCK0_XGXS_CONTROL 0x10
#define MDIO_OVER_1G_LP_UP2_PREEMPHASIS_SHIFT 7
#define MDIO_OVER_1G_LP_UP3 0x1E
+#define MDIO_REG_BANK_REMOTE_PHY 0x8330
+#define MDIO_REMOTE_PHY_MISC_RX_STATUS 0x10
+#define MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_OVER1G_MSG 0x0010
+#define MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_BRCM_OUI_MSG 0x0600
+
#define MDIO_REG_BANK_BAM_NEXT_PAGE 0x8350
#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL 0x10
#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE 0x0001
#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN 0x0002
#define MDIO_REG_BANK_CL73_USERB0 0x8370
+#define MDIO_CL73_USERB0_CL73_UCTRL 0x10
+#define MDIO_CL73_USERB0_CL73_UCTRL_USTAT1_MUXSEL 0x0002
+#define MDIO_CL73_USERB0_CL73_USTAT1 0x11
+#define MDIO_CL73_USERB0_CL73_USTAT1_LINK_STATUS_CHECK 0x0100
+#define MDIO_CL73_USERB0_CL73_USTAT1_AN_GOOD_CHECK_BAM37 0x0400
#define MDIO_CL73_USERB0_CL73_BAM_CTRL1 0x12
#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_EN 0x8000
#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_STATION_MNGR_EN 0x4000
#define MDIO_PMA_REG_GEN_CTRL 0xca10
#define MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP 0x0188
#define MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET 0x018a
+#define MDIO_PMA_REG_M8051_MSGIN_REG 0xca12
+#define MDIO_PMA_REG_M8051_MSGOUT_REG 0xca13
#define MDIO_PMA_REG_ROM_VER1 0xca19
#define MDIO_PMA_REG_ROM_VER2 0xca1a
#define MDIO_PMA_REG_EDC_FFE_MAIN 0xca1b
#define MDIO_PMA_REG_PLL_BANDWIDTH 0xca1d
+#define MDIO_PMA_REG_PLL_CTRL 0xca1e
+#define MDIO_PMA_REG_MISC_CTRL0 0xca23
+#define MDIO_PMA_REG_LRM_MODE 0xca3f
#define MDIO_PMA_REG_CDR_BANDWIDTH 0xca46
#define MDIO_PMA_REG_MISC_CTRL1 0xca85
+#define MDIO_PMA_REG_SFP_TWO_WIRE_CTRL 0x8000
+#define MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK 0x000c
+#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IDLE 0x0000
+#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE 0x0004
+#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IN_PROGRESS 0x0008
+#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_FAILED 0x000c
+#define MDIO_PMA_REG_SFP_TWO_WIRE_BYTE_CNT 0x8002
+#define MDIO_PMA_REG_SFP_TWO_WIRE_MEM_ADDR 0x8003
+#define MDIO_PMA_REG_8726_TWO_WIRE_DATA_BUF 0xc820
+#define MDIO_PMA_REG_8726_TWO_WIRE_DATA_MASK 0xff
+#define MDIO_PMA_REG_8726_TX_CTRL1 0xca01
+#define MDIO_PMA_REG_8726_TX_CTRL2 0xca05
+
+#define MDIO_PMA_REG_8727_TWO_WIRE_SLAVE_ADDR 0x8005
+#define MDIO_PMA_REG_8727_TWO_WIRE_DATA_BUF 0x8007
+#define MDIO_PMA_REG_8727_TWO_WIRE_DATA_MASK 0xff
+#define MDIO_PMA_REG_8727_MISC_CTRL 0x8309
+#define MDIO_PMA_REG_8727_TX_CTRL1 0xca02
+#define MDIO_PMA_REG_8727_TX_CTRL2 0xca05
+#define MDIO_PMA_REG_8727_PCS_OPT_CTRL 0xc808
+#define MDIO_PMA_REG_8727_GPIO_CTRL 0xc80e
+
+#define MDIO_PMA_REG_8073_CHIP_REV 0xc801
+#define MDIO_PMA_REG_8073_SPEED_LINK_STATUS 0xc820
+#define MDIO_PMA_REG_8073_XAUI_WA 0xc841
+
#define MDIO_PMA_REG_7101_RESET 0xc000
#define MDIO_PMA_REG_7107_LED_CNTL 0xc007
#define MDIO_PMA_REG_7101_VER1 0xc026
#define MDIO_PMA_REG_7101_VER2 0xc027
+#define MDIO_PMA_REG_8481_PMD_SIGNAL 0xa811
+#define MDIO_PMA_REG_8481_LED1_MASK 0xa82c
+#define MDIO_PMA_REG_8481_LED2_MASK 0xa82f
+#define MDIO_PMA_REG_8481_LED3_MASK 0xa832
+#define MDIO_PMA_REG_8481_SIGNAL_MASK 0xa835
+#define MDIO_PMA_REG_8481_LINK_SIGNAL 0xa83b
+
#define MDIO_WIS_DEVAD 0x2
/*bcm*/
#define MDIO_XS_PLL_SEQUENCER 0x8000
#define MDIO_XS_SFX7101_XGXS_TEST1 0xc00a
+#define MDIO_XS_8706_REG_BANK_RX0 0x80bc
+#define MDIO_XS_8706_REG_BANK_RX1 0x80cc
+#define MDIO_XS_8706_REG_BANK_RX2 0x80dc
+#define MDIO_XS_8706_REG_BANK_RX3 0x80ec
+#define MDIO_XS_8706_REG_BANK_RXA 0x80fc
+
#define MDIO_AN_DEVAD 0x7
/*ieee*/
#define MDIO_AN_REG_CTRL 0x0000
#define MDIO_AN_REG_LINK_STATUS 0x8304
#define MDIO_AN_REG_CL37_CL73 0x8370
#define MDIO_AN_REG_CL37_AN 0xffe0
-#define MDIO_AN_REG_CL37_FD 0xffe4
+#define MDIO_AN_REG_CL37_FC_LD 0xffe4
+#define MDIO_AN_REG_CL37_FC_LP 0xffe5
+
+#define MDIO_AN_REG_8073_2_5G 0x8329
+#define MDIO_AN_REG_8481_LEGACY_MII_CTRL 0xffe0
+#define MDIO_AN_REG_8481_LEGACY_AN_ADV 0xffe4
+#define MDIO_AN_REG_8481_1000T_CTRL 0xffe9
+#define MDIO_AN_REG_8481_EXPANSION_REG_RD_RW 0xfff5
+#define MDIO_AN_REG_8481_EXPANSION_REG_ACCESS 0xfff7
+#define MDIO_AN_REG_8481_LEGACY_SHADOW 0xfffc
#define IGU_FUNC_BASE 0x0400
#define COMMAND_REG_SIMD_NOMASK 0x1c
+#define IGU_MEM_BASE 0x0000
+
+#define IGU_MEM_MSIX_BASE 0x0000
+#define IGU_MEM_MSIX_UPPER 0x007f
+#define IGU_MEM_MSIX_RESERVED_UPPER 0x01ff
+
+#define IGU_MEM_PBA_MSIX_BASE 0x0200
+#define IGU_MEM_PBA_MSIX_UPPER 0x0200
+
+#define IGU_CMD_BACKWARD_COMP_PROD_UPD 0x0201
+#define IGU_MEM_PBA_MSIX_RESERVED_UPPER 0x03ff
+
+#define IGU_CMD_INT_ACK_BASE 0x0400
+#define IGU_CMD_INT_ACK_UPPER\
+ (IGU_CMD_INT_ACK_BASE + MAX_SB_PER_PORT * NUM_OF_PORTS_PER_PATH - 1)
+#define IGU_CMD_INT_ACK_RESERVED_UPPER 0x04ff
+
+#define IGU_CMD_E2_PROD_UPD_BASE 0x0500
+#define IGU_CMD_E2_PROD_UPD_UPPER\
+ (IGU_CMD_E2_PROD_UPD_BASE + MAX_SB_PER_PORT * NUM_OF_PORTS_PER_PATH - 1)
+#define IGU_CMD_E2_PROD_UPD_RESERVED_UPPER 0x059f
+
+#define IGU_CMD_ATTN_BIT_UPD_UPPER 0x05a0
+#define IGU_CMD_ATTN_BIT_SET_UPPER 0x05a1
+#define IGU_CMD_ATTN_BIT_CLR_UPPER 0x05a2
+
+#define IGU_REG_SISR_MDPC_WMASK_UPPER 0x05a3
+#define IGU_REG_SISR_MDPC_WMASK_LSB_UPPER 0x05a4
+#define IGU_REG_SISR_MDPC_WMASK_MSB_UPPER 0x05a5
+#define IGU_REG_SISR_MDPC_WOMASK_UPPER 0x05a6
+
+#define IGU_REG_RESERVED_UPPER 0x05ff
+
+
+#define CDU_REGION_NUMBER_XCM_AG 2
+#define CDU_REGION_NUMBER_UCM_AG 4
+
+
+/**
+ * String-to-compress [31:8] = CID (all 24 bits)
+ * String-to-compress [7:4] = Region
+ * String-to-compress [3:0] = Type
+ */
+#define CDU_VALID_DATA(_cid, _region, _type)\
+ (((_cid) << 8) | (((_region)&0xf)<<4) | (((_type)&0xf)))
+#define CDU_CRC8(_cid, _region, _type)\
+ (calc_crc8(CDU_VALID_DATA(_cid, _region, _type), 0xff))
+#define CDU_RSRVD_VALUE_TYPE_A(_cid, _region, _type)\
+ (0x80 | ((CDU_CRC8(_cid, _region, _type)) & 0x7f))
+#define CDU_RSRVD_VALUE_TYPE_B(_crc, _type)\
+ (0x80 | ((_type)&0xf << 3) | ((CDU_CRC8(_cid, _region, _type)) & 0x7))
+#define CDU_RSRVD_INVALIDATE_CONTEXT_VALUE(_val) ((_val) & ~0x80)
+
+/******************************************************************************
+ * Description:
+ * Calculates crc 8 on a word value: polynomial 0-1-2-8
+ * Code was translated from Verilog.
+ * Return:
+ *****************************************************************************/
+static inline u8 calc_crc8(u32 data, u8 crc)
+{
+ u8 D[32];
+ u8 NewCRC[8];
+ u8 C[8];
+ u8 crc_res;
+ u8 i;
+
+ /* split the data into 31 bits */
+ for (i = 0; i < 32; i++) {
+ D[i] = (u8)(data & 1);
+ data = data >> 1;
+ }
+
+ /* split the crc into 8 bits */
+ for (i = 0; i < 8; i++) {
+ C[i] = crc & 1;
+ crc = crc >> 1;
+ }
+
+ NewCRC[0] = D[31] ^ D[30] ^ D[28] ^ D[23] ^ D[21] ^ D[19] ^ D[18] ^
+ D[16] ^ D[14] ^ D[12] ^ D[8] ^ D[7] ^ D[6] ^ D[0] ^ C[4] ^
+ C[6] ^ C[7];
+ NewCRC[1] = D[30] ^ D[29] ^ D[28] ^ D[24] ^ D[23] ^ D[22] ^ D[21] ^
+ D[20] ^ D[18] ^ D[17] ^ D[16] ^ D[15] ^ D[14] ^ D[13] ^
+ D[12] ^ D[9] ^ D[6] ^ D[1] ^ D[0] ^ C[0] ^ C[4] ^ C[5] ^
+ C[6];
+ NewCRC[2] = D[29] ^ D[28] ^ D[25] ^ D[24] ^ D[22] ^ D[17] ^ D[15] ^
+ D[13] ^ D[12] ^ D[10] ^ D[8] ^ D[6] ^ D[2] ^ D[1] ^ D[0] ^
+ C[0] ^ C[1] ^ C[4] ^ C[5];
+ NewCRC[3] = D[30] ^ D[29] ^ D[26] ^ D[25] ^ D[23] ^ D[18] ^ D[16] ^
+ D[14] ^ D[13] ^ D[11] ^ D[9] ^ D[7] ^ D[3] ^ D[2] ^ D[1] ^
+ C[1] ^ C[2] ^ C[5] ^ C[6];
+ NewCRC[4] = D[31] ^ D[30] ^ D[27] ^ D[26] ^ D[24] ^ D[19] ^ D[17] ^
+ D[15] ^ D[14] ^ D[12] ^ D[10] ^ D[8] ^ D[4] ^ D[3] ^ D[2] ^
+ C[0] ^ C[2] ^ C[3] ^ C[6] ^ C[7];
+ NewCRC[5] = D[31] ^ D[28] ^ D[27] ^ D[25] ^ D[20] ^ D[18] ^ D[16] ^
+ D[15] ^ D[13] ^ D[11] ^ D[9] ^ D[5] ^ D[4] ^ D[3] ^ C[1] ^
+ C[3] ^ C[4] ^ C[7];
+ NewCRC[6] = D[29] ^ D[28] ^ D[26] ^ D[21] ^ D[19] ^ D[17] ^ D[16] ^
+ D[14] ^ D[12] ^ D[10] ^ D[6] ^ D[5] ^ D[4] ^ C[2] ^ C[4] ^
+ C[5];
+ NewCRC[7] = D[30] ^ D[29] ^ D[27] ^ D[22] ^ D[20] ^ D[18] ^ D[17] ^
+ D[15] ^ D[13] ^ D[11] ^ D[7] ^ D[6] ^ D[5] ^ C[3] ^ C[5] ^
+ C[6];
+
+ crc_res = 0;
+ for (i = 0; i < 8; i++)
+ crc_res |= (NewCRC[i] << i);
+
+ return crc_res;
+}
+
+
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff