#include <linux/zlib.h>
#include <linux/io.h>
-#include "bnx2x_reg.h"
-#include "bnx2x_fw_defs.h"
-#include "bnx2x_hsi.h"
-#include "bnx2x_link.h"
+
#include "bnx2x.h"
#include "bnx2x_init.h"
+#include "bnx2x_init_ops.h"
+#include "bnx2x_dump.h"
-#define DRV_MODULE_VERSION "1.45.26"
-#define DRV_MODULE_RELDATE "2009/01/26"
+#define DRV_MODULE_VERSION "1.48.105-1"
+#define DRV_MODULE_RELDATE "2009/04/22"
#define BNX2X_BC_VER 0x040200
+#include <linux/firmware.h>
+#include "bnx2x_fw_file_hdr.h"
+/* FW files */
+#define FW_FILE_PREFIX_E1 "bnx2x-e1-"
+#define FW_FILE_PREFIX_E1H "bnx2x-e1h-"
+
/* Time in jiffies before concluding the transmitter is hung */
#define TX_TIMEOUT (5*HZ)
static int multi_mode = 1;
module_param(multi_mode, int, 0);
+MODULE_PARM_DESC(multi_mode, " Use per-CPU queues");
static int disable_tpa;
-static int poll;
-static int debug;
-static int load_count[3]; /* 0-common, 1-port0, 2-port1 */
-
module_param(disable_tpa, int, 0);
+MODULE_PARM_DESC(disable_tpa, " Disable the TPA (LRO) feature");
static int int_mode;
module_param(int_mode, int, 0);
MODULE_PARM_DESC(int_mode, " Force interrupt mode (1 INT#x; 2 MSI)");
+static int poll;
module_param(poll, int, 0);
+MODULE_PARM_DESC(poll, " Use polling (for debug)");
+
+static int mrrs = -1;
+module_param(mrrs, int, 0);
+MODULE_PARM_DESC(mrrs, " Force Max Read Req Size (0..3) (for debug)");
+
+static int debug;
module_param(debug, int, 0);
-MODULE_PARM_DESC(disable_tpa, "disable the TPA (LRO) feature");
-MODULE_PARM_DESC(poll, "use polling (for debug)");
-MODULE_PARM_DESC(debug, "default debug msglevel");
+MODULE_PARM_DESC(debug, " Default debug msglevel");
+
+static int load_count[3]; /* 0-common, 1-port0, 2-port1 */
static struct workqueue_struct *bnx2x_wq;
dmae->comp_addr_hi = U64_HI(bnx2x_sp_mapping(bp, wb_comp));
dmae->comp_val = DMAE_COMP_VAL;
- DP(BNX2X_MSG_OFF, "dmae: opcode 0x%08x\n"
+ DP(BNX2X_MSG_OFF, "DMAE: opcode 0x%08x\n"
DP_LEVEL "src_addr [%x:%08x] len [%d *4] "
"dst_addr [%x:%08x (%08x)]\n"
DP_LEVEL "comp_addr [%x:%08x] comp_val 0x%08x\n",
DP(BNX2X_MSG_OFF, "wb_comp 0x%08x\n", *wb_comp);
if (!cnt) {
- BNX2X_ERR("dmae timeout!\n");
+ BNX2X_ERR("DMAE timeout!\n");
break;
}
cnt--;
dmae->comp_addr_hi = U64_HI(bnx2x_sp_mapping(bp, wb_comp));
dmae->comp_val = DMAE_COMP_VAL;
- DP(BNX2X_MSG_OFF, "dmae: opcode 0x%08x\n"
+ DP(BNX2X_MSG_OFF, "DMAE: opcode 0x%08x\n"
DP_LEVEL "src_addr [%x:%08x] len [%d *4] "
"dst_addr [%x:%08x (%08x)]\n"
DP_LEVEL "comp_addr [%x:%08x] comp_val 0x%08x\n",
while (*wb_comp != DMAE_COMP_VAL) {
if (!cnt) {
- BNX2X_ERR("dmae timeout!\n");
+ BNX2X_ERR("DMAE timeout!\n");
break;
}
cnt--;
static void bnx2x_fw_dump(struct bnx2x *bp)
{
u32 mark, offset;
- u32 data[9];
+ __be32 data[9];
int word;
mark = REG_RD(bp, MCP_REG_MCPR_SCRATCH + 0xf104);
BNX2X_ERR("begin crash dump -----------------\n");
- for_each_queue(bp, i) {
+ /* Indices */
+ /* Common */
+ BNX2X_ERR("def_c_idx(%u) def_u_idx(%u) def_x_idx(%u)"
+ " def_t_idx(%u) def_att_idx(%u) attn_state(%u)"
+ " spq_prod_idx(%u)\n",
+ bp->def_c_idx, bp->def_u_idx, bp->def_x_idx, bp->def_t_idx,
+ bp->def_att_idx, bp->attn_state, bp->spq_prod_idx);
+
+ /* Rx */
+ for_each_rx_queue(bp, i) {
struct bnx2x_fastpath *fp = &bp->fp[i];
- struct eth_tx_db_data *hw_prods = fp->hw_tx_prods;
- BNX2X_ERR("queue[%d]: tx_pkt_prod(%x) tx_pkt_cons(%x)"
- " tx_bd_prod(%x) tx_bd_cons(%x) *tx_cons_sb(%x)\n",
- i, fp->tx_pkt_prod, fp->tx_pkt_cons, fp->tx_bd_prod,
- fp->tx_bd_cons, le16_to_cpu(*fp->tx_cons_sb));
- BNX2X_ERR(" rx_bd_prod(%x) rx_bd_cons(%x)"
+ BNX2X_ERR("fp%d: rx_bd_prod(%x) rx_bd_cons(%x)"
" *rx_bd_cons_sb(%x) rx_comp_prod(%x)"
" rx_comp_cons(%x) *rx_cons_sb(%x)\n",
- fp->rx_bd_prod, fp->rx_bd_cons,
+ i, fp->rx_bd_prod, fp->rx_bd_cons,
le16_to_cpu(*fp->rx_bd_cons_sb), fp->rx_comp_prod,
fp->rx_comp_cons, le16_to_cpu(*fp->rx_cons_sb));
- BNX2X_ERR(" rx_sge_prod(%x) last_max_sge(%x)"
- " fp_c_idx(%x) *sb_c_idx(%x) fp_u_idx(%x)"
- " *sb_u_idx(%x) bd data(%x,%x)\n",
- fp->rx_sge_prod, fp->last_max_sge, fp->fp_c_idx,
- fp->status_blk->c_status_block.status_block_index,
- fp->fp_u_idx,
- fp->status_blk->u_status_block.status_block_index,
- hw_prods->packets_prod, hw_prods->bds_prod);
-
- start = TX_BD(le16_to_cpu(*fp->tx_cons_sb) - 10);
- end = TX_BD(le16_to_cpu(*fp->tx_cons_sb) + 245);
- for (j = start; j < end; j++) {
- struct sw_tx_bd *sw_bd = &fp->tx_buf_ring[j];
+ BNX2X_ERR(" rx_sge_prod(%x) last_max_sge(%x)"
+ " fp_u_idx(%x) *sb_u_idx(%x)\n",
+ fp->rx_sge_prod, fp->last_max_sge,
+ le16_to_cpu(fp->fp_u_idx),
+ fp->status_blk->u_status_block.status_block_index);
+ }
- BNX2X_ERR("packet[%x]=[%p,%x]\n", j,
- sw_bd->skb, sw_bd->first_bd);
- }
+ /* Tx */
+ for_each_tx_queue(bp, i) {
+ struct bnx2x_fastpath *fp = &bp->fp[i];
+ struct eth_tx_db_data *hw_prods = fp->hw_tx_prods;
- start = TX_BD(fp->tx_bd_cons - 10);
- end = TX_BD(fp->tx_bd_cons + 254);
- for (j = start; j < end; j++) {
- u32 *tx_bd = (u32 *)&fp->tx_desc_ring[j];
+ BNX2X_ERR("fp%d: tx_pkt_prod(%x) tx_pkt_cons(%x)"
+ " tx_bd_prod(%x) tx_bd_cons(%x) *tx_cons_sb(%x)\n",
+ i, fp->tx_pkt_prod, fp->tx_pkt_cons, fp->tx_bd_prod,
+ fp->tx_bd_cons, le16_to_cpu(*fp->tx_cons_sb));
+ BNX2X_ERR(" fp_c_idx(%x) *sb_c_idx(%x)"
+ " bd data(%x,%x)\n", le16_to_cpu(fp->fp_c_idx),
+ fp->status_blk->c_status_block.status_block_index,
+ hw_prods->packets_prod, hw_prods->bds_prod);
+ }
- BNX2X_ERR("tx_bd[%x]=[%x:%x:%x:%x]\n",
- j, tx_bd[0], tx_bd[1], tx_bd[2], tx_bd[3]);
- }
+ /* Rings */
+ /* Rx */
+ for_each_rx_queue(bp, i) {
+ struct bnx2x_fastpath *fp = &bp->fp[i];
start = RX_BD(le16_to_cpu(*fp->rx_cons_sb) - 10);
end = RX_BD(le16_to_cpu(*fp->rx_cons_sb) + 503);
- for (j = start; j < end; j++) {
+ for (j = start; j != end; j = RX_BD(j + 1)) {
u32 *rx_bd = (u32 *)&fp->rx_desc_ring[j];
struct sw_rx_bd *sw_bd = &fp->rx_buf_ring[j];
- BNX2X_ERR("rx_bd[%x]=[%x:%x] sw_bd=[%p]\n",
- j, rx_bd[1], rx_bd[0], sw_bd->skb);
+ BNX2X_ERR("fp%d: rx_bd[%x]=[%x:%x] sw_bd=[%p]\n",
+ i, j, rx_bd[1], rx_bd[0], sw_bd->skb);
}
start = RX_SGE(fp->rx_sge_prod);
end = RX_SGE(fp->last_max_sge);
- for (j = start; j < end; j++) {
+ for (j = start; j != end; j = RX_SGE(j + 1)) {
u32 *rx_sge = (u32 *)&fp->rx_sge_ring[j];
struct sw_rx_page *sw_page = &fp->rx_page_ring[j];
- BNX2X_ERR("rx_sge[%x]=[%x:%x] sw_page=[%p]\n",
- j, rx_sge[1], rx_sge[0], sw_page->page);
+ BNX2X_ERR("fp%d: rx_sge[%x]=[%x:%x] sw_page=[%p]\n",
+ i, j, rx_sge[1], rx_sge[0], sw_page->page);
}
start = RCQ_BD(fp->rx_comp_cons - 10);
end = RCQ_BD(fp->rx_comp_cons + 503);
- for (j = start; j < end; j++) {
+ for (j = start; j != end; j = RCQ_BD(j + 1)) {
u32 *cqe = (u32 *)&fp->rx_comp_ring[j];
- BNX2X_ERR("cqe[%x]=[%x:%x:%x:%x]\n",
- j, cqe[0], cqe[1], cqe[2], cqe[3]);
+ BNX2X_ERR("fp%d: cqe[%x]=[%x:%x:%x:%x]\n",
+ i, j, cqe[0], cqe[1], cqe[2], cqe[3]);
}
}
- BNX2X_ERR("def_c_idx(%u) def_u_idx(%u) def_x_idx(%u)"
- " def_t_idx(%u) def_att_idx(%u) attn_state(%u)"
- " spq_prod_idx(%u)\n",
- bp->def_c_idx, bp->def_u_idx, bp->def_x_idx, bp->def_t_idx,
- bp->def_att_idx, bp->attn_state, bp->spq_prod_idx);
+ /* Tx */
+ for_each_tx_queue(bp, i) {
+ struct bnx2x_fastpath *fp = &bp->fp[i];
+
+ start = TX_BD(le16_to_cpu(*fp->tx_cons_sb) - 10);
+ end = TX_BD(le16_to_cpu(*fp->tx_cons_sb) + 245);
+ for (j = start; j != end; j = TX_BD(j + 1)) {
+ struct sw_tx_bd *sw_bd = &fp->tx_buf_ring[j];
+
+ BNX2X_ERR("fp%d: packet[%x]=[%p,%x]\n",
+ i, j, sw_bd->skb, sw_bd->first_bd);
+ }
+
+ start = TX_BD(fp->tx_bd_cons - 10);
+ end = TX_BD(fp->tx_bd_cons + 254);
+ for (j = start; j != end; j = TX_BD(j + 1)) {
+ u32 *tx_bd = (u32 *)&fp->tx_desc_ring[j];
+
+ BNX2X_ERR("fp%d: tx_bd[%x]=[%x:%x:%x:%x]\n",
+ i, j, tx_bd[0], tx_bd[1], tx_bd[2], tx_bd[3]);
+ }
+ }
bnx2x_fw_dump(bp);
bnx2x_mc_assert(bp);
val, port, addr, (msix ? "MSI-X" : (msi ? "MSI" : "INTx")));
REG_WR(bp, addr, val);
+ /*
+ * Ensure that HC_CONFIG is written before leading/trailing edge config
+ */
+ mmiowb();
+ barrier();
if (CHIP_IS_E1H(bp)) {
/* init leading/trailing edge */
if (IS_E1HMF(bp)) {
val = (0xee0f | (1 << (BP_E1HVN(bp) + 4)));
if (bp->port.pmf)
- /* enable nig attention */
- val |= 0x0100;
+ /* enable nig and gpio3 attention */
+ val |= 0x1100;
} else
val = 0xffff;
REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, val);
REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, val);
}
+
+ /* Make sure that interrupts are indeed enabled from here on */
+ mmiowb();
}
static void bnx2x_int_disable(struct bnx2x *bp)
REG_WR(bp, addr, val);
if (REG_RD(bp, addr) != val)
BNX2X_ERR("BUG! proper val not read from IGU!\n");
+
}
static void bnx2x_int_disable_sync(struct bnx2x *bp, int disable_hw)
/* disable interrupt handling */
atomic_inc(&bp->intr_sem);
+ smp_wmb(); /* Ensure that bp->intr_sem update is SMP-safe */
+
if (disable_hw)
/* prevent the HW from sending interrupts */
bnx2x_int_disable(bp);
DP(BNX2X_MSG_OFF, "write 0x%08x to HC addr 0x%x\n",
(*(u32 *)&igu_ack), hc_addr);
REG_WR(bp, hc_addr, (*(u32 *)&igu_ack));
+
+ /* Make sure that ACK is written */
+ mmiowb();
+ barrier();
}
static inline u16 bnx2x_update_fpsb_idx(struct bnx2x_fastpath *fp)
/* Tell compiler that consumer and producer can change */
barrier();
return (fp->tx_pkt_prod != fp->tx_pkt_cons);
-
}
/* free skb in the packet ring at pos idx
return (s16)(fp->bp->tx_ring_size) - used;
}
-static void bnx2x_tx_int(struct bnx2x_fastpath *fp, int work)
+static void bnx2x_tx_int(struct bnx2x_fastpath *fp)
{
struct bnx2x *bp = fp->bp;
struct netdev_queue *txq;
bd_cons = bnx2x_free_tx_pkt(bp, fp, pkt_cons);
sw_cons++;
done++;
-
- if (done == work)
- break;
}
fp->tx_pkt_cons = sw_cons;
fp->tx_bd_cons = bd_cons;
- /* Need to make the tx_bd_cons update visible to start_xmit()
- * before checking for netif_tx_queue_stopped(). Without the
- * memory barrier, there is a small possibility that start_xmit()
- * will miss it and cause the queue to be stopped forever.
- */
- smp_mb();
-
/* TBD need a thresh? */
if (unlikely(netif_tx_queue_stopped(txq))) {
__netif_tx_lock(txq, smp_processor_id());
+ /* Need to make the tx_bd_cons update visible to start_xmit()
+ * before checking for netif_tx_queue_stopped(). Without the
+ * memory barrier, there is a small possibility that
+ * start_xmit() will miss it and cause the queue to be stopped
+ * forever.
+ */
+ smp_mb();
+
if ((netif_tx_queue_stopped(txq)) &&
(bp->state == BNX2X_STATE_OPEN) &&
(bnx2x_tx_avail(fp) >= MAX_SKB_FRAGS + 3))
DP(BNX2X_MSG_SP,
"fp %d cid %d got ramrod #%d state is %x type is %d\n",
- FP_IDX(fp), cid, command, bp->state,
+ fp->index, cid, command, bp->state,
rr_cqe->ramrod_cqe.ramrod_type);
bp->spq_left++;
- if (FP_IDX(fp)) {
+ if (fp->index) {
switch (command | fp->state) {
case (RAMROD_CMD_ID_ETH_CLIENT_SETUP |
BNX2X_FP_STATE_OPENING):
for (i = 0; i < sizeof(struct ustorm_eth_rx_producers)/4; i++)
REG_WR(bp, BAR_USTRORM_INTMEM +
- USTORM_RX_PRODS_OFFSET(BP_PORT(bp), FP_CL_ID(fp)) + i*4,
+ USTORM_RX_PRODS_OFFSET(BP_PORT(bp), fp->cl_id) + i*4,
((u32 *)&rx_prods)[i]);
mmiowb(); /* keep prod updates ordered */
DP(NETIF_MSG_RX_STATUS,
"queue[%d]: hw_comp_cons %u sw_comp_cons %u\n",
- FP_IDX(fp), hw_comp_cons, sw_comp_cons);
+ fp->index, hw_comp_cons, sw_comp_cons);
while (sw_comp_cons != hw_comp_cons) {
struct sw_rx_bd *rx_buf = NULL;
len, cqe, comp_ring_cons);
#ifdef BNX2X_STOP_ON_ERROR
if (bp->panic)
- return -EINVAL;
+ return 0;
#endif
bnx2x_update_sge_prod(fp,
{
struct bnx2x_fastpath *fp = fp_cookie;
struct bnx2x *bp = fp->bp;
- int index = FP_IDX(fp);
+ int index = fp->index;
/* Return here if interrupt is disabled */
if (unlikely(atomic_read(&bp->intr_sem) != 0)) {
}
DP(BNX2X_MSG_FP, "got an MSI-X interrupt on IDX:SB [%d:%d]\n",
- index, FP_SB_ID(fp));
- bnx2x_ack_sb(bp, FP_SB_ID(fp), USTORM_ID, 0, IGU_INT_DISABLE, 0);
+ index, fp->sb_id);
+ bnx2x_ack_sb(bp, fp->sb_id, USTORM_ID, 0, IGU_INT_DISABLE, 0);
#ifdef BNX2X_STOP_ON_ERROR
if (unlikely(bp->panic))
DP(NETIF_MSG_INTR, "not our interrupt!\n");
return IRQ_NONE;
}
- DP(NETIF_MSG_INTR, "got an interrupt status %u\n", status);
+ DP(NETIF_MSG_INTR, "got an interrupt status 0x%x\n", status);
/* Return here if interrupt is disabled */
if (unlikely(atomic_read(&bp->intr_sem) != 0)) {
/* HW Lock for shared dual port PHYs */
static void bnx2x_acquire_phy_lock(struct bnx2x *bp)
{
- u32 ext_phy_type = XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config);
-
mutex_lock(&bp->port.phy_mutex);
- if ((ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072) ||
- (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073))
- bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+ if (bp->port.need_hw_lock)
+ bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_MDIO);
}
static void bnx2x_release_phy_lock(struct bnx2x *bp)
{
- u32 ext_phy_type = XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config);
-
- if ((ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072) ||
- (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073))
- bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+ if (bp->port.need_hw_lock)
+ bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_MDIO);
mutex_unlock(&bp->port.phy_mutex);
}
+int bnx2x_get_gpio(struct bnx2x *bp, int gpio_num, u8 port)
+{
+ /* The GPIO should be swapped if swap register is set and active */
+ int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) &&
+ REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ port;
+ int gpio_shift = gpio_num +
+ (gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0);
+ u32 gpio_mask = (1 << gpio_shift);
+ u32 gpio_reg;
+ int value;
+
+ if (gpio_num > MISC_REGISTERS_GPIO_3) {
+ BNX2X_ERR("Invalid GPIO %d\n", gpio_num);
+ return -EINVAL;
+ }
+
+ /* read GPIO value */
+ gpio_reg = REG_RD(bp, MISC_REG_GPIO);
+
+ /* get the requested pin value */
+ if ((gpio_reg & gpio_mask) == gpio_mask)
+ value = 1;
+ else
+ value = 0;
+
+ DP(NETIF_MSG_LINK, "pin %d value 0x%x\n", gpio_num, value);
+
+ return value;
+}
+
int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode, u8 port)
{
/* The GPIO should be swapped if swap register is set and active */
return 0;
}
+int bnx2x_set_gpio_int(struct bnx2x *bp, int gpio_num, u32 mode, u8 port)
+{
+ /* The GPIO should be swapped if swap register is set and active */
+ int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) &&
+ REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ port;
+ int gpio_shift = gpio_num +
+ (gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0);
+ u32 gpio_mask = (1 << gpio_shift);
+ u32 gpio_reg;
+
+ if (gpio_num > MISC_REGISTERS_GPIO_3) {
+ BNX2X_ERR("Invalid GPIO %d\n", gpio_num);
+ return -EINVAL;
+ }
+
+ bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
+ /* read GPIO int */
+ gpio_reg = REG_RD(bp, MISC_REG_GPIO_INT);
+
+ switch (mode) {
+ case MISC_REGISTERS_GPIO_INT_OUTPUT_CLR:
+ DP(NETIF_MSG_LINK, "Clear GPIO INT %d (shift %d) -> "
+ "output low\n", gpio_num, gpio_shift);
+ /* clear SET and set CLR */
+ gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_INT_SET_POS);
+ gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_INT_CLR_POS);
+ break;
+
+ case MISC_REGISTERS_GPIO_INT_OUTPUT_SET:
+ DP(NETIF_MSG_LINK, "Set GPIO INT %d (shift %d) -> "
+ "output high\n", gpio_num, gpio_shift);
+ /* clear CLR and set SET */
+ gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_INT_CLR_POS);
+ gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_INT_SET_POS);
+ break;
+
+ default:
+ break;
+ }
+
+ REG_WR(bp, MISC_REG_GPIO_INT, gpio_reg);
+ bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
+
+ return 0;
+}
+
static int bnx2x_set_spio(struct bnx2x *bp, int spio_num, u32 mode)
{
u32 spio_mask = (1 << spio_num);
bp->port.advertising &= ~(ADVERTISED_Asym_Pause |
ADVERTISED_Pause);
break;
+
case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH:
bp->port.advertising |= (ADVERTISED_Asym_Pause |
ADVERTISED_Pause);
break;
+
case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC:
bp->port.advertising |= ADVERTISED_Asym_Pause;
break;
+
default:
bp->port.advertising &= ~(ADVERTISED_Asym_Pause |
ADVERTISED_Pause);
if (bp->link_vars.flow_ctrl != BNX2X_FLOW_CTRL_NONE) {
if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_RX) {
printk(", receive ");
- if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_TX)
+ if (bp->link_vars.flow_ctrl &
+ BNX2X_FLOW_CTRL_TX)
printk("& transmit ");
} else {
printk(", transmit ");
}
}
-static u8 bnx2x_initial_phy_init(struct bnx2x *bp)
+static u8 bnx2x_initial_phy_init(struct bnx2x *bp, int load_mode)
{
if (!BP_NOMCP(bp)) {
u8 rc;
bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_BOTH;
bnx2x_acquire_phy_lock(bp);
+
+ if (load_mode == LOAD_DIAG)
+ bp->link_params.loopback_mode = LOOPBACK_XGXS_10;
+
rc = bnx2x_phy_init(&bp->link_params, &bp->link_vars);
+
bnx2x_release_phy_lock(bp);
bnx2x_calc_fc_adv(bp);
- if (bp->link_vars.link_up)
+ if (CHIP_REV_IS_SLOW(bp) && bp->link_vars.link_up) {
+ bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP);
bnx2x_link_report(bp);
-
+ }
return rc;
}
- BNX2X_ERR("Bootcode is missing -not initializing link\n");
+ BNX2X_ERR("Bootcode is missing - can not initialize link\n");
return -EINVAL;
}
bnx2x_calc_fc_adv(bp);
} else
- BNX2X_ERR("Bootcode is missing -not setting link\n");
+ BNX2X_ERR("Bootcode is missing - can not set link\n");
}
static void bnx2x__link_reset(struct bnx2x *bp)
{
if (!BP_NOMCP(bp)) {
bnx2x_acquire_phy_lock(bp);
- bnx2x_link_reset(&bp->link_params, &bp->link_vars);
+ bnx2x_link_reset(&bp->link_params, &bp->link_vars, 1);
bnx2x_release_phy_lock(bp);
} else
- BNX2X_ERR("Bootcode is missing -not resetting link\n");
+ BNX2X_ERR("Bootcode is missing - can not reset link\n");
}
static u8 bnx2x_link_test(struct bnx2x *bp)
bp->spq_prod_idx++;
}
+ /* Make sure that BD data is updated before writing the producer */
+ wmb();
+
REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_SPQ_PROD_OFFSET(func),
bp->spq_prod_idx);
+ mmiowb();
+
spin_unlock_bh(&bp->spq_lock);
return 0;
}
}
}
+static inline void bnx2x_fan_failure(struct bnx2x *bp)
+{
+ int port = BP_PORT(bp);
+
+ /* mark the failure */
+ bp->link_params.ext_phy_config &= ~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK;
+ bp->link_params.ext_phy_config |= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE;
+ SHMEM_WR(bp, dev_info.port_hw_config[port].external_phy_config,
+ bp->link_params.ext_phy_config);
+
+ /* log the failure */
+ printk(KERN_ERR PFX "Fan Failure on Network Controller %s has caused"
+ " the driver to shutdown the card to prevent permanent"
+ " damage. Please contact Dell Support for assistance\n",
+ bp->dev->name);
+}
static inline void bnx2x_attn_int_deasserted0(struct bnx2x *bp, u32 attn)
{
int port = BP_PORT(bp);
BNX2X_ERR("SPIO5 hw attention\n");
+ /* Fan failure attention */
switch (XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config)) {
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
- /* Fan failure attention */
-
- /* The PHY reset is controlled by GPIO 1 */
- bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
- MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
/* Low power mode is controlled by GPIO 2 */
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
- /* mark the failure */
- bp->link_params.ext_phy_config &=
- ~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK;
- bp->link_params.ext_phy_config |=
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE;
- SHMEM_WR(bp,
- dev_info.port_hw_config[port].
- external_phy_config,
- bp->link_params.ext_phy_config);
- /* log the failure */
- printk(KERN_ERR PFX "Fan Failure on Network"
- " Controller %s has caused the driver to"
- " shutdown the card to prevent permanent"
- " damage. Please contact Dell Support for"
- " assistance\n", bp->dev->name);
+ /* The PHY reset is controlled by GPIO 1 */
+ bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
+ MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
break;
default:
break;
}
+ bnx2x_fan_failure(bp);
+ }
+
+ if (attn & (AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_0 |
+ AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_1)) {
+ bnx2x_acquire_phy_lock(bp);
+ bnx2x_handle_module_detect_int(&bp->link_params);
+ bnx2x_release_phy_lock(bp);
}
if (attn & HW_INTERRUT_ASSERT_SET_0) {
{
u32 val;
- if (attn & BNX2X_DOORQ_ASSERT) {
+ if (attn & AEU_INPUTS_ATTN_BITS_DOORBELLQ_HW_INTERRUPT) {
val = REG_RD(bp, DORQ_REG_DORQ_INT_STS_CLR);
BNX2X_ERR("DB hw attention 0x%x\n", val);
#define UPDATE_EXTEND_TSTAT(s, t) \
do { \
- diff = le32_to_cpu(tclient->s) - old_tclient->s; \
- old_tclient->s = le32_to_cpu(tclient->s); \
+ diff = le32_to_cpu(tclient->s) - le32_to_cpu(old_tclient->s); \
+ old_tclient->s = tclient->s; \
ADD_EXTEND_64(qstats->t##_hi, qstats->t##_lo, diff); \
} while (0)
#define UPDATE_EXTEND_XSTAT(s, t) \
do { \
- diff = le32_to_cpu(xclient->s) - old_xclient->s; \
- old_xclient->s = le32_to_cpu(xclient->s); \
+ diff = le32_to_cpu(xclient->s) - le32_to_cpu(old_xclient->s); \
+ old_xclient->s = xclient->s; \
ADD_EXTEND_64(qstats->t##_hi, qstats->t##_lo, diff); \
} while (0)
struct bmac_stats *new = bnx2x_sp(bp, mac_stats.bmac_stats);
struct host_port_stats *pstats = bnx2x_sp(bp, port_stats);
struct bnx2x_eth_stats *estats = &bp->eth_stats;
- struct regpair diff;
+ struct {
+ u32 lo;
+ u32 hi;
+ } diff;
UPDATE_STAT64(rx_stat_grerb, rx_stat_ifhcinbadoctets);
UPDATE_STAT64(rx_stat_grfcs, rx_stat_dot3statsfcserrors);
struct nig_stats *old = &(bp->port.old_nig_stats);
struct host_port_stats *pstats = bnx2x_sp(bp, port_stats);
struct bnx2x_eth_stats *estats = &bp->eth_stats;
- struct regpair diff;
+ struct {
+ u32 lo;
+ u32 hi;
+ } diff;
u32 nig_timer_max;
if (bp->link_vars.mac_type == MAC_TYPE_BMAC)
bnx2x_emac_stats_update(bp);
else { /* unreached */
- BNX2X_ERR("stats updated by dmae but no MAC active\n");
+ BNX2X_ERR("stats updated by DMAE but no MAC active\n");
return -1;
}
"mac_discard %u mac_filter_discard %u "
"xxovrflow_discard %u brb_truncate_discard %u "
"ttl0_discard %u\n",
- old_tclient->checksum_discard,
+ le32_to_cpu(old_tclient->checksum_discard),
bnx2x_hilo(&qstats->etherstatsoverrsizepkts_hi),
bnx2x_hilo(&qstats->no_buff_discard_hi),
estats->mac_discard, estats->mac_filter_discard,
estats->xxoverflow_discard, estats->brb_truncate_discard,
- old_tclient->ttl0_discard);
+ le32_to_cpu(old_tclient->ttl0_discard));
for_each_queue(bp, i) {
printk(KERN_DEBUG "[%d]: %lu\t%lu\t%lu\n", i,
struct bnx2x_fastpath *fp = &bp->fp[0];
int rc;
- bnx2x_tx_int(fp, 1000);
+ bnx2x_tx_int(fp);
rc = bnx2x_rx_int(fp, 1000);
}
{
int port = BP_PORT(bp);
- bnx2x_init_fill(bp, BAR_USTRORM_INTMEM +
+ bnx2x_init_fill(bp, USTORM_INTMEM_ADDR +
USTORM_SB_HOST_STATUS_BLOCK_OFFSET(port, sb_id), 0,
sizeof(struct ustorm_status_block)/4);
- bnx2x_init_fill(bp, BAR_CSTRORM_INTMEM +
+ bnx2x_init_fill(bp, CSTORM_INTMEM_ADDR +
CSTORM_SB_HOST_STATUS_BLOCK_OFFSET(port, sb_id), 0,
sizeof(struct cstorm_status_block)/4);
}
{
int func = BP_FUNC(bp);
- bnx2x_init_fill(bp, BAR_USTRORM_INTMEM +
+ bnx2x_init_fill(bp, TSTORM_INTMEM_ADDR +
+ TSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), 0,
+ sizeof(struct tstorm_def_status_block)/4);
+ bnx2x_init_fill(bp, USTORM_INTMEM_ADDR +
USTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), 0,
sizeof(struct ustorm_def_status_block)/4);
- bnx2x_init_fill(bp, BAR_CSTRORM_INTMEM +
+ bnx2x_init_fill(bp, CSTORM_INTMEM_ADDR +
CSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), 0,
sizeof(struct cstorm_def_status_block)/4);
- bnx2x_init_fill(bp, BAR_XSTRORM_INTMEM +
+ bnx2x_init_fill(bp, XSTORM_INTMEM_ADDR +
XSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), 0,
sizeof(struct xstorm_def_status_block)/4);
- bnx2x_init_fill(bp, BAR_TSTRORM_INTMEM +
- TSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), 0,
- sizeof(struct tstorm_def_status_block)/4);
}
static void bnx2x_init_def_sb(struct bnx2x *bp,
REG_WR16(bp, BAR_USTRORM_INTMEM +
USTORM_SB_HC_DISABLE_OFFSET(port, sb_id,
U_SB_ETH_RX_CQ_INDEX),
- bp->rx_ticks ? 0 : 1);
+ (bp->rx_ticks/12) ? 0 : 1);
/* HC_INDEX_C_ETH_TX_CQ_CONS */
REG_WR8(bp, BAR_CSTRORM_INTMEM +
REG_WR16(bp, BAR_CSTRORM_INTMEM +
CSTORM_SB_HC_DISABLE_OFFSET(port, sb_id,
C_SB_ETH_TX_CQ_INDEX),
- bp->tx_ticks ? 0 : 1);
+ (bp->tx_ticks/12) ? 0 : 1);
}
}
if (fp->tpa_state[i] == BNX2X_TPA_START)
pci_unmap_single(bp->pdev,
pci_unmap_addr(rx_buf, mapping),
- bp->rx_buf_size,
- PCI_DMA_FROMDEVICE);
+ bp->rx_buf_size, PCI_DMA_FROMDEVICE);
dev_kfree_skb(skb);
rx_buf->skb = NULL;
struct eth_context *context = bnx2x_sp(bp, context[i].eth);
struct bnx2x_fastpath *fp = &bp->fp[i];
u8 cl_id = fp->cl_id;
- u8 sb_id = FP_SB_ID(fp);
+ u8 sb_id = fp->sb_id;
context->ustorm_st_context.common.sb_index_numbers =
BNX2X_RX_SB_INDEX_NUM;
- context->ustorm_st_context.common.clientId = FP_CL_ID(fp);
+ context->ustorm_st_context.common.clientId = cl_id;
context->ustorm_st_context.common.status_block_id = sb_id;
context->ustorm_st_context.common.flags =
(USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_MC_ALIGNMENT |
U64_HI(fp->tx_prods_mapping);
context->xstorm_st_context.db_data_addr_lo =
U64_LO(fp->tx_prods_mapping);
- context->xstorm_st_context.statistics_data = (fp->cl_id |
+ context->xstorm_st_context.statistics_data = (cl_id |
XSTORM_ETH_ST_CONTEXT_STATISTICS_ENABLE);
context->cstorm_st_context.sb_index_number =
C_SB_ETH_TX_CQ_INDEX;
for (i = 0; i < TSTORM_INDIRECTION_TABLE_SIZE; i++)
REG_WR8(bp, BAR_TSTRORM_INTMEM +
TSTORM_INDIRECTION_TABLE_OFFSET(func) + i,
- BP_CL_ID(bp) + (i % bp->num_rx_queues));
+ bp->fp->cl_id + (i % bp->num_rx_queues));
}
static void bnx2x_set_client_config(struct bnx2x *bp)
tstorm_mac_filter.mcast_drop_all = mask;
tstorm_mac_filter.bcast_drop_all = mask;
break;
+
case BNX2X_RX_MODE_NORMAL:
tstorm_mac_filter.bcast_accept_all = mask;
break;
+
case BNX2X_RX_MODE_ALLMULTI:
tstorm_mac_filter.mcast_accept_all = mask;
tstorm_mac_filter.bcast_accept_all = mask;
break;
+
case BNX2X_RX_MODE_PROMISC:
tstorm_mac_filter.ucast_accept_all = mask;
tstorm_mac_filter.mcast_accept_all = mask;
tstorm_mac_filter.bcast_accept_all = mask;
break;
+
default:
BNX2X_ERR("BAD rx mode (%d)\n", mode);
break;
struct bnx2x_fastpath *fp = &bp->fp[i];
REG_WR(bp, BAR_USTRORM_INTMEM +
- USTORM_CQE_PAGE_BASE_OFFSET(port, FP_CL_ID(fp)),
+ USTORM_CQE_PAGE_BASE_OFFSET(port, fp->cl_id),
U64_LO(fp->rx_comp_mapping));
REG_WR(bp, BAR_USTRORM_INTMEM +
- USTORM_CQE_PAGE_BASE_OFFSET(port, FP_CL_ID(fp)) + 4,
+ USTORM_CQE_PAGE_BASE_OFFSET(port, fp->cl_id) + 4,
U64_HI(fp->rx_comp_mapping));
REG_WR16(bp, BAR_USTRORM_INTMEM +
- USTORM_MAX_AGG_SIZE_OFFSET(port, FP_CL_ID(fp)),
+ USTORM_MAX_AGG_SIZE_OFFSET(port, fp->cl_id),
max_agg_size);
}
fp->cl_id = BP_L_ID(bp) + i;
fp->sb_id = fp->cl_id;
DP(NETIF_MSG_IFUP,
- "bnx2x_init_sb(%p,%p) index %d cl_id %d sb %d\n",
- bp, fp->status_blk, i, FP_CL_ID(fp), FP_SB_ID(fp));
+ "queue[%d]: bnx2x_init_sb(%p,%p) cl_id %d sb %d\n",
+ i, bp, fp->status_blk, fp->cl_id, fp->sb_id);
bnx2x_init_sb(bp, fp->status_blk, fp->status_blk_mapping,
- FP_SB_ID(fp));
+ fp->sb_id);
bnx2x_update_fpsb_idx(fp);
}
+ /* ensure status block indices were read */
+ rmb();
+
+
bnx2x_init_def_sb(bp, bp->def_status_blk, bp->def_status_blk_mapping,
DEF_SB_ID);
bnx2x_update_dsb_idx(bp);
mmiowb();
bnx2x_int_enable(bp);
+
+ /* Check for SPIO5 */
+ bnx2x_attn_int_deasserted0(bp,
+ REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + BP_PORT(bp)*4) &
+ AEU_INPUTS_ATTN_BITS_SPIO5);
}
/* end of nic init */
}
}
-static int bnx2x_gunzip(struct bnx2x *bp, u8 *zbuf, int len)
+static int bnx2x_gunzip(struct bnx2x *bp, const u8 *zbuf, int len)
{
int n, rc;
/* check gzip header */
- if ((zbuf[0] != 0x1f) || (zbuf[1] != 0x8b) || (zbuf[2] != Z_DEFLATED))
+ if ((zbuf[0] != 0x1f) || (zbuf[1] != 0x8b) || (zbuf[2] != Z_DEFLATED)) {
+ BNX2X_ERR("Bad gzip header\n");
return -EINVAL;
+ }
n = 10;
if (zbuf[3] & FNAME)
while ((zbuf[n++] != 0) && (n < len));
- bp->strm->next_in = zbuf + n;
+ bp->strm->next_in = (typeof(bp->strm->next_in))zbuf + n;
bp->strm->avail_in = len - n;
bp->strm->next_out = bp->gunzip_buf;
bp->strm->avail_out = FW_BUF_SIZE;
msleep(50);
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x03);
msleep(50);
- bnx2x_init_block(bp, BRB1_COMMON_START, BRB1_COMMON_END);
- bnx2x_init_block(bp, PRS_COMMON_START, PRS_COMMON_END);
+ bnx2x_init_block(bp, BRB1_BLOCK, COMMON_STAGE);
+ bnx2x_init_block(bp, PRS_BLOCK, COMMON_STAGE);
DP(NETIF_MSG_HW, "part2\n");
msleep(50);
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x03);
msleep(50);
- bnx2x_init_block(bp, BRB1_COMMON_START, BRB1_COMMON_END);
- bnx2x_init_block(bp, PRS_COMMON_START, PRS_COMMON_END);
+ bnx2x_init_block(bp, BRB1_BLOCK, COMMON_STAGE);
+ bnx2x_init_block(bp, PRS_BLOCK, COMMON_STAGE);
#ifndef BCM_ISCSI
/* set NIC mode */
REG_WR(bp, PRS_REG_NIC_MODE, 1);
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, 0x1403);
}
+
+static void bnx2x_setup_fan_failure_detection(struct bnx2x *bp)
+{
+ u32 val;
+ u8 port;
+ u8 is_required = 0;
+
+ val = SHMEM_RD(bp, dev_info.shared_hw_config.config2) &
+ SHARED_HW_CFG_FAN_FAILURE_MASK;
+
+ if (val == SHARED_HW_CFG_FAN_FAILURE_ENABLED)
+ is_required = 1;
+
+ /*
+ * The fan failure mechanism is usually related to the PHY type since
+ * the power consumption of the board is affected by the PHY. Currently,
+ * fan is required for most designs with SFX7101, BCM8727 and BCM8481.
+ */
+ else if (val == SHARED_HW_CFG_FAN_FAILURE_PHY_TYPE)
+ for (port = PORT_0; port < PORT_MAX; port++) {
+ u32 phy_type =
+ SHMEM_RD(bp, dev_info.port_hw_config[port].
+ external_phy_config) &
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK;
+ is_required |=
+ ((phy_type ==
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101) ||
+ (phy_type ==
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481));
+ }
+
+ DP(NETIF_MSG_HW, "fan detection setting: %d\n", is_required);
+
+ if (is_required == 0)
+ return;
+
+ /* Fan failure is indicated by SPIO 5 */
+ bnx2x_set_spio(bp, MISC_REGISTERS_SPIO_5,
+ MISC_REGISTERS_SPIO_INPUT_HI_Z);
+
+ /* set to active low mode */
+ val = REG_RD(bp, MISC_REG_SPIO_INT);
+ val |= ((1 << MISC_REGISTERS_SPIO_5) <<
+ MISC_REGISTERS_SPIO_INT_OLD_SET_POS);
+ REG_WR(bp, MISC_REG_SPIO_INT, val);
+
+ /* enable interrupt to signal the IGU */
+ val = REG_RD(bp, MISC_REG_SPIO_EVENT_EN);
+ val |= (1 << MISC_REGISTERS_SPIO_5);
+ REG_WR(bp, MISC_REG_SPIO_EVENT_EN, val);
+}
+
static int bnx2x_init_common(struct bnx2x *bp)
{
u32 val, i;
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0xffffffff);
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, 0xfffc);
- bnx2x_init_block(bp, MISC_COMMON_START, MISC_COMMON_END);
+ bnx2x_init_block(bp, MISC_BLOCK, COMMON_STAGE);
if (CHIP_IS_E1H(bp))
REG_WR(bp, MISC_REG_E1HMF_MODE, IS_E1HMF(bp));
msleep(30);
REG_WR(bp, MISC_REG_LCPLL_CTRL_REG_2, 0x0);
- bnx2x_init_block(bp, PXP_COMMON_START, PXP_COMMON_END);
+ bnx2x_init_block(bp, PXP_BLOCK, COMMON_STAGE);
if (CHIP_IS_E1(bp)) {
/* enable HW interrupt from PXP on USDM overflow
bit 16 on INT_MASK_0 */
REG_WR(bp, PXP_REG_PXP_INT_MASK_0, 0);
}
- bnx2x_init_block(bp, PXP2_COMMON_START, PXP2_COMMON_END);
+ bnx2x_init_block(bp, PXP2_BLOCK, COMMON_STAGE);
bnx2x_init_pxp(bp);
#ifdef __BIG_ENDIAN
REG_WR(bp, PXP2_REG_RQ_DISABLE_INPUTS, 0);
REG_WR(bp, PXP2_REG_RD_DISABLE_INPUTS, 0);
- bnx2x_init_block(bp, DMAE_COMMON_START, DMAE_COMMON_END);
+ bnx2x_init_block(bp, DMAE_BLOCK, COMMON_STAGE);
/* clean the DMAE memory */
bp->dmae_ready = 1;
bnx2x_init_fill(bp, TSEM_REG_PRAM, 0, 8);
- bnx2x_init_block(bp, TCM_COMMON_START, TCM_COMMON_END);
- bnx2x_init_block(bp, UCM_COMMON_START, UCM_COMMON_END);
- bnx2x_init_block(bp, CCM_COMMON_START, CCM_COMMON_END);
- bnx2x_init_block(bp, XCM_COMMON_START, XCM_COMMON_END);
+ bnx2x_init_block(bp, TCM_BLOCK, COMMON_STAGE);
+ bnx2x_init_block(bp, UCM_BLOCK, COMMON_STAGE);
+ bnx2x_init_block(bp, CCM_BLOCK, COMMON_STAGE);
+ bnx2x_init_block(bp, XCM_BLOCK, COMMON_STAGE);
bnx2x_read_dmae(bp, XSEM_REG_PASSIVE_BUFFER, 3);
bnx2x_read_dmae(bp, CSEM_REG_PASSIVE_BUFFER, 3);
bnx2x_read_dmae(bp, TSEM_REG_PASSIVE_BUFFER, 3);
bnx2x_read_dmae(bp, USEM_REG_PASSIVE_BUFFER, 3);
- bnx2x_init_block(bp, QM_COMMON_START, QM_COMMON_END);
+ bnx2x_init_block(bp, QM_BLOCK, COMMON_STAGE);
/* soft reset pulse */
REG_WR(bp, QM_REG_SOFT_RESET, 1);
REG_WR(bp, QM_REG_SOFT_RESET, 0);
#ifdef BCM_ISCSI
- bnx2x_init_block(bp, TIMERS_COMMON_START, TIMERS_COMMON_END);
+ bnx2x_init_block(bp, TIMERS_BLOCK, COMMON_STAGE);
#endif
- bnx2x_init_block(bp, DQ_COMMON_START, DQ_COMMON_END);
+ bnx2x_init_block(bp, DQ_BLOCK, COMMON_STAGE);
REG_WR(bp, DORQ_REG_DPM_CID_OFST, BCM_PAGE_SHIFT);
if (!CHIP_REV_IS_SLOW(bp)) {
/* enable hw interrupt from doorbell Q */
REG_WR(bp, DORQ_REG_DORQ_INT_MASK, 0);
}
- bnx2x_init_block(bp, BRB1_COMMON_START, BRB1_COMMON_END);
- bnx2x_init_block(bp, PRS_COMMON_START, PRS_COMMON_END);
+ bnx2x_init_block(bp, BRB1_BLOCK, COMMON_STAGE);
+ bnx2x_init_block(bp, PRS_BLOCK, COMMON_STAGE);
REG_WR(bp, PRS_REG_A_PRSU_20, 0xf);
/* set NIC mode */
REG_WR(bp, PRS_REG_NIC_MODE, 1);
if (CHIP_IS_E1H(bp))
REG_WR(bp, PRS_REG_E1HOV_MODE, IS_E1HMF(bp));
- bnx2x_init_block(bp, TSDM_COMMON_START, TSDM_COMMON_END);
- bnx2x_init_block(bp, CSDM_COMMON_START, CSDM_COMMON_END);
- bnx2x_init_block(bp, USDM_COMMON_START, USDM_COMMON_END);
- bnx2x_init_block(bp, XSDM_COMMON_START, XSDM_COMMON_END);
+ bnx2x_init_block(bp, TSDM_BLOCK, COMMON_STAGE);
+ bnx2x_init_block(bp, CSDM_BLOCK, COMMON_STAGE);
+ bnx2x_init_block(bp, USDM_BLOCK, COMMON_STAGE);
+ bnx2x_init_block(bp, XSDM_BLOCK, COMMON_STAGE);
- if (CHIP_IS_E1H(bp)) {
- bnx2x_init_fill(bp, TSTORM_INTMEM_ADDR, 0,
- STORM_INTMEM_SIZE_E1H/2);
- bnx2x_init_fill(bp,
- TSTORM_INTMEM_ADDR + STORM_INTMEM_SIZE_E1H/2,
- 0, STORM_INTMEM_SIZE_E1H/2);
- bnx2x_init_fill(bp, CSTORM_INTMEM_ADDR, 0,
- STORM_INTMEM_SIZE_E1H/2);
- bnx2x_init_fill(bp,
- CSTORM_INTMEM_ADDR + STORM_INTMEM_SIZE_E1H/2,
- 0, STORM_INTMEM_SIZE_E1H/2);
- bnx2x_init_fill(bp, XSTORM_INTMEM_ADDR, 0,
- STORM_INTMEM_SIZE_E1H/2);
- bnx2x_init_fill(bp,
- XSTORM_INTMEM_ADDR + STORM_INTMEM_SIZE_E1H/2,
- 0, STORM_INTMEM_SIZE_E1H/2);
- bnx2x_init_fill(bp, USTORM_INTMEM_ADDR, 0,
- STORM_INTMEM_SIZE_E1H/2);
- bnx2x_init_fill(bp,
- USTORM_INTMEM_ADDR + STORM_INTMEM_SIZE_E1H/2,
- 0, STORM_INTMEM_SIZE_E1H/2);
- } else { /* E1 */
- bnx2x_init_fill(bp, TSTORM_INTMEM_ADDR, 0,
- STORM_INTMEM_SIZE_E1);
- bnx2x_init_fill(bp, CSTORM_INTMEM_ADDR, 0,
- STORM_INTMEM_SIZE_E1);
- bnx2x_init_fill(bp, XSTORM_INTMEM_ADDR, 0,
- STORM_INTMEM_SIZE_E1);
- bnx2x_init_fill(bp, USTORM_INTMEM_ADDR, 0,
- STORM_INTMEM_SIZE_E1);
- }
-
- bnx2x_init_block(bp, TSEM_COMMON_START, TSEM_COMMON_END);
- bnx2x_init_block(bp, USEM_COMMON_START, USEM_COMMON_END);
- bnx2x_init_block(bp, CSEM_COMMON_START, CSEM_COMMON_END);
- bnx2x_init_block(bp, XSEM_COMMON_START, XSEM_COMMON_END);
+ bnx2x_init_fill(bp, TSTORM_INTMEM_ADDR, 0, STORM_INTMEM_SIZE(bp));
+ bnx2x_init_fill(bp, USTORM_INTMEM_ADDR, 0, STORM_INTMEM_SIZE(bp));
+ bnx2x_init_fill(bp, CSTORM_INTMEM_ADDR, 0, STORM_INTMEM_SIZE(bp));
+ bnx2x_init_fill(bp, XSTORM_INTMEM_ADDR, 0, STORM_INTMEM_SIZE(bp));
+
+ bnx2x_init_block(bp, TSEM_BLOCK, COMMON_STAGE);
+ bnx2x_init_block(bp, USEM_BLOCK, COMMON_STAGE);
+ bnx2x_init_block(bp, CSEM_BLOCK, COMMON_STAGE);
+ bnx2x_init_block(bp, XSEM_BLOCK, COMMON_STAGE);
/* sync semi rtc */
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET,
0x80000000);
- bnx2x_init_block(bp, UPB_COMMON_START, UPB_COMMON_END);
- bnx2x_init_block(bp, XPB_COMMON_START, XPB_COMMON_END);
- bnx2x_init_block(bp, PBF_COMMON_START, PBF_COMMON_END);
+ bnx2x_init_block(bp, UPB_BLOCK, COMMON_STAGE);
+ bnx2x_init_block(bp, XPB_BLOCK, COMMON_STAGE);
+ bnx2x_init_block(bp, PBF_BLOCK, COMMON_STAGE);
REG_WR(bp, SRC_REG_SOFT_RST, 1);
for (i = SRC_REG_KEYRSS0_0; i <= SRC_REG_KEYRSS1_9; i += 4) {
REG_WR(bp, i, 0xc0cac01a);
/* TODO: replace with something meaningful */
}
- bnx2x_init_block(bp, SRCH_COMMON_START, SRCH_COMMON_END);
+ bnx2x_init_block(bp, SRCH_BLOCK, COMMON_STAGE);
REG_WR(bp, SRC_REG_SOFT_RST, 0);
if (sizeof(union cdu_context) != 1024)
printk(KERN_ALERT PFX "please adjust the size of"
" cdu_context(%ld)\n", (long)sizeof(union cdu_context));
- bnx2x_init_block(bp, CDU_COMMON_START, CDU_COMMON_END);
+ bnx2x_init_block(bp, CDU_BLOCK, COMMON_STAGE);
val = (4 << 24) + (0 << 12) + 1024;
REG_WR(bp, CDU_REG_CDU_GLOBAL_PARAMS, val);
if (CHIP_IS_E1(bp)) {
REG_WR(bp, CDU_REG_CDU_DEBUG, 0);
}
- bnx2x_init_block(bp, CFC_COMMON_START, CFC_COMMON_END);
+ bnx2x_init_block(bp, CFC_BLOCK, COMMON_STAGE);
REG_WR(bp, CFC_REG_INIT_REG, 0x7FF);
/* enable context validation interrupt from CFC */
REG_WR(bp, CFC_REG_CFC_INT_MASK, 0);
/* set the thresholds to prevent CFC/CDU race */
REG_WR(bp, CFC_REG_DEBUG0, 0x20020000);
- bnx2x_init_block(bp, HC_COMMON_START, HC_COMMON_END);
- bnx2x_init_block(bp, MISC_AEU_COMMON_START, MISC_AEU_COMMON_END);
+ bnx2x_init_block(bp, HC_BLOCK, COMMON_STAGE);
+ bnx2x_init_block(bp, MISC_AEU_BLOCK, COMMON_STAGE);
/* PXPCS COMMON comes here */
+ bnx2x_init_block(bp, PXPCS_BLOCK, COMMON_STAGE);
/* Reset PCIE errors for debug */
REG_WR(bp, 0x2814, 0xffffffff);
REG_WR(bp, 0x3820, 0xffffffff);
/* EMAC0 COMMON comes here */
+ bnx2x_init_block(bp, EMAC0_BLOCK, COMMON_STAGE);
/* EMAC1 COMMON comes here */
+ bnx2x_init_block(bp, EMAC1_BLOCK, COMMON_STAGE);
/* DBU COMMON comes here */
+ bnx2x_init_block(bp, DBU_BLOCK, COMMON_STAGE);
/* DBG COMMON comes here */
+ bnx2x_init_block(bp, DBG_BLOCK, COMMON_STAGE);
- bnx2x_init_block(bp, NIG_COMMON_START, NIG_COMMON_END);
+ bnx2x_init_block(bp, NIG_BLOCK, COMMON_STAGE);
if (CHIP_IS_E1H(bp)) {
REG_WR(bp, NIG_REG_LLH_MF_MODE, IS_E1HMF(bp));
REG_WR(bp, NIG_REG_LLH_E1HOV_MODE, IS_E1HMF(bp));
}
switch (XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config)) {
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
- /* Fan failure is indicated by SPIO 5 */
- bnx2x_set_spio(bp, MISC_REGISTERS_SPIO_5,
- MISC_REGISTERS_SPIO_INPUT_HI_Z);
-
- /* set to active low mode */
- val = REG_RD(bp, MISC_REG_SPIO_INT);
- val |= ((1 << MISC_REGISTERS_SPIO_5) <<
- MISC_REGISTERS_SPIO_INT_OLD_SET_POS);
- REG_WR(bp, MISC_REG_SPIO_INT, val);
-
- /* enable interrupt to signal the IGU */
- val = REG_RD(bp, MISC_REG_SPIO_EVENT_EN);
- val |= (1 << MISC_REGISTERS_SPIO_5);
- REG_WR(bp, MISC_REG_SPIO_EVENT_EN, val);
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
+ bp->port.need_hw_lock = 1;
break;
default:
break;
}
+ bnx2x_setup_fan_failure_detection(bp);
+
/* clear PXP2 attentions */
REG_RD(bp, PXP2_REG_PXP2_INT_STS_CLR_0);
static int bnx2x_init_port(struct bnx2x *bp)
{
int port = BP_PORT(bp);
+ int init_stage = port ? PORT1_STAGE : PORT0_STAGE;
u32 low, high;
u32 val;
REG_WR(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, 0);
/* Port PXP comes here */
+ bnx2x_init_block(bp, PXP_BLOCK, init_stage);
/* Port PXP2 comes here */
+ bnx2x_init_block(bp, PXP2_BLOCK, init_stage);
#ifdef BCM_ISCSI
/* Port0 1
* Port1 385 */
REG_WR(bp, PXP2_REG_PSWRQ_SRC0_L2P + func*4, PXP_ONE_ILT(i));
#endif
/* Port CMs come here */
- bnx2x_init_block(bp, (port ? XCM_PORT1_START : XCM_PORT0_START),
- (port ? XCM_PORT1_END : XCM_PORT0_END));
+ bnx2x_init_block(bp, XCM_BLOCK, init_stage);
/* Port QM comes here */
#ifdef BCM_ISCSI
REG_WR(bp, TM_REG_LIN0_SCAN_TIME + func*4, 1024/64*20);
REG_WR(bp, TM_REG_LIN0_MAX_ACTIVE_CID + func*4, 31);
- bnx2x_init_block(bp, func ? TIMERS_PORT1_START : TIMERS_PORT0_START,
- func ? TIMERS_PORT1_END : TIMERS_PORT0_END);
+ bnx2x_init_block(bp, TIMERS_BLOCK, init_stage);
#endif
/* Port DQ comes here */
+ bnx2x_init_block(bp, DQ_BLOCK, init_stage);
- bnx2x_init_block(bp, (port ? BRB1_PORT1_START : BRB1_PORT0_START),
- (port ? BRB1_PORT1_END : BRB1_PORT0_END));
+ bnx2x_init_block(bp, BRB1_BLOCK, init_stage);
if (CHIP_REV_IS_SLOW(bp) && !CHIP_IS_E1H(bp)) {
/* no pause for emulation and FPGA */
low = 0;
/* Port PRS comes here */
+ bnx2x_init_block(bp, PRS_BLOCK, init_stage);
/* Port TSDM comes here */
+ bnx2x_init_block(bp, TSDM_BLOCK, init_stage);
/* Port CSDM comes here */
+ bnx2x_init_block(bp, CSDM_BLOCK, init_stage);
/* Port USDM comes here */
+ bnx2x_init_block(bp, USDM_BLOCK, init_stage);
/* Port XSDM comes here */
- bnx2x_init_block(bp, port ? TSEM_PORT1_START : TSEM_PORT0_START,
- port ? TSEM_PORT1_END : TSEM_PORT0_END);
- bnx2x_init_block(bp, port ? USEM_PORT1_START : USEM_PORT0_START,
- port ? USEM_PORT1_END : USEM_PORT0_END);
- bnx2x_init_block(bp, port ? CSEM_PORT1_START : CSEM_PORT0_START,
- port ? CSEM_PORT1_END : CSEM_PORT0_END);
- bnx2x_init_block(bp, port ? XSEM_PORT1_START : XSEM_PORT0_START,
- port ? XSEM_PORT1_END : XSEM_PORT0_END);
+ bnx2x_init_block(bp, XSDM_BLOCK, init_stage);
+
+ bnx2x_init_block(bp, TSEM_BLOCK, init_stage);
+ bnx2x_init_block(bp, USEM_BLOCK, init_stage);
+ bnx2x_init_block(bp, CSEM_BLOCK, init_stage);
+ bnx2x_init_block(bp, XSEM_BLOCK, init_stage);
+
/* Port UPB comes here */
+ bnx2x_init_block(bp, UPB_BLOCK, init_stage);
/* Port XPB comes here */
+ bnx2x_init_block(bp, XPB_BLOCK, init_stage);
- bnx2x_init_block(bp, port ? PBF_PORT1_START : PBF_PORT0_START,
- port ? PBF_PORT1_END : PBF_PORT0_END);
+ bnx2x_init_block(bp, PBF_BLOCK, init_stage);
/* configure PBF to work without PAUSE mtu 9000 */
REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, 0);
/* Port SRCH comes here */
#endif
/* Port CDU comes here */
+ bnx2x_init_block(bp, CDU_BLOCK, init_stage);
/* Port CFC comes here */
+ bnx2x_init_block(bp, CFC_BLOCK, init_stage);
if (CHIP_IS_E1(bp)) {
REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0);
REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0);
}
- bnx2x_init_block(bp, port ? HC_PORT1_START : HC_PORT0_START,
- port ? HC_PORT1_END : HC_PORT0_END);
+ bnx2x_init_block(bp, HC_BLOCK, init_stage);
- bnx2x_init_block(bp, port ? MISC_AEU_PORT1_START :
- MISC_AEU_PORT0_START,
- port ? MISC_AEU_PORT1_END : MISC_AEU_PORT0_END);
+ bnx2x_init_block(bp, MISC_AEU_BLOCK, init_stage);
/* init aeu_mask_attn_func_0/1:
* - SF mode: bits 3-7 are masked. only bits 0-2 are in use
* - MF mode: bit 3 is masked. bits 0-2 are in use as in SF
(IS_E1HMF(bp) ? 0xF7 : 0x7));
/* Port PXPCS comes here */
+ bnx2x_init_block(bp, PXPCS_BLOCK, init_stage);
/* Port EMAC0 comes here */
+ bnx2x_init_block(bp, EMAC0_BLOCK, init_stage);
/* Port EMAC1 comes here */
+ bnx2x_init_block(bp, EMAC1_BLOCK, init_stage);
/* Port DBU comes here */
+ bnx2x_init_block(bp, DBU_BLOCK, init_stage);
/* Port DBG comes here */
- bnx2x_init_block(bp, port ? NIG_PORT1_START : NIG_PORT0_START,
- port ? NIG_PORT1_END : NIG_PORT0_END);
+ bnx2x_init_block(bp, DBG_BLOCK, init_stage);
+
+ bnx2x_init_block(bp, NIG_BLOCK, init_stage);
REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 1);
}
/* Port MCP comes here */
+ bnx2x_init_block(bp, MCP_BLOCK, init_stage);
/* Port DMAE comes here */
+ bnx2x_init_block(bp, DMAE_BLOCK, init_stage);
switch (XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config)) {
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
+ {
+ u32 swap_val, swap_override, aeu_gpio_mask, offset;
+
+ bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_3,
+ MISC_REGISTERS_GPIO_INPUT_HI_Z, port);
+
+ /* The GPIO should be swapped if the swap register is
+ set and active */
+ swap_val = REG_RD(bp, NIG_REG_PORT_SWAP);
+ swap_override = REG_RD(bp, NIG_REG_STRAP_OVERRIDE);
+
+ /* Select function upon port-swap configuration */
+ if (port == 0) {
+ offset = MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0;
+ aeu_gpio_mask = (swap_val && swap_override) ?
+ AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_1 :
+ AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_0;
+ } else {
+ offset = MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0;
+ aeu_gpio_mask = (swap_val && swap_override) ?
+ AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_0 :
+ AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_1;
+ }
+ val = REG_RD(bp, offset);
+ /* add GPIO3 to group */
+ val |= aeu_gpio_mask;
+ REG_WR(bp, offset, val);
+ }
+ break;
+
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
/* add SPIO 5 to group 0 */
val = REG_RD(bp, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
if (CHIP_IS_E1H(bp)) {
for (i = 0; i < 9; i++)
bnx2x_init_block(bp,
- cm_start[func][i], cm_end[func][i]);
+ cm_blocks[i], FUNC0_STAGE + func);
REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 1);
REG_WR(bp, NIG_REG_LLH0_FUNC_VLAN_ID + port*8, bp->e1hov);
REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0);
REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0);
}
- bnx2x_init_block(bp, hc_limits[func][0], hc_limits[func][1]);
+ bnx2x_init_block(bp, HC_BLOCK, FUNC0_STAGE + func);
/* Reset PCIE errors for debug */
REG_WR(bp, 0x2114, 0xffffffff);
pci_unmap_single(bp->pdev,
pci_unmap_addr(rx_buf, mapping),
- bp->rx_buf_size,
- PCI_DMA_FROMDEVICE);
+ bp->rx_buf_size, PCI_DMA_FROMDEVICE);
rx_buf->skb = NULL;
dev_kfree_skb(skb);
static void bnx2x_netif_start(struct bnx2x *bp)
{
- if (atomic_dec_and_test(&bp->intr_sem)) {
+ int intr_sem;
+
+ intr_sem = atomic_dec_and_test(&bp->intr_sem);
+ smp_wmb(); /* Ensure that bp->intr_sem update is SMP-safe */
+
+ if (intr_sem) {
if (netif_running(bp->dev)) {
bnx2x_napi_enable(bp);
bnx2x_int_enable(bp);
{
bnx2x_int_disable_sync(bp, disable_hw);
bnx2x_napi_disable(bp);
- if (netif_running(bp->dev)) {
- netif_tx_disable(bp->dev);
- bp->dev->trans_start = jiffies; /* prevent tx timeout */
- }
+ netif_tx_disable(bp->dev);
+ bp->dev->trans_start = jiffies; /* prevent tx timeout */
}
/*
*/
config->hdr.length = 2;
config->hdr.offset = port ? 32 : 0;
- config->hdr.client_id = BP_CL_ID(bp);
+ config->hdr.client_id = bp->fp->cl_id;
config->hdr.reserved1 = 0;
/* primary MAC */
config->config_table[0].cam_entry.lsb_mac_addr);
/* broadcast */
- config->config_table[1].cam_entry.msb_mac_addr = 0xffff;
- config->config_table[1].cam_entry.middle_mac_addr = 0xffff;
- config->config_table[1].cam_entry.lsb_mac_addr = 0xffff;
+ config->config_table[1].cam_entry.msb_mac_addr = cpu_to_le16(0xffff);
+ config->config_table[1].cam_entry.middle_mac_addr = cpu_to_le16(0xffff);
+ config->config_table[1].cam_entry.lsb_mac_addr = cpu_to_le16(0xffff);
config->config_table[1].cam_entry.flags = cpu_to_le16(port);
if (set)
config->config_table[1].target_table_entry.flags =
*/
config->hdr.length = 1;
config->hdr.offset = BP_FUNC(bp);
- config->hdr.client_id = BP_CL_ID(bp);
+ config->hdr.client_id = bp->fp->cl_id;
config->hdr.reserved1 = 0;
/* primary MAC */
int *state_p, int poll)
{
/* can take a while if any port is running */
- int cnt = 500;
+ int cnt = 5000;
DP(NETIF_MSG_IFUP, "%s for state to become %x on IDX [%d]\n",
poll ? "polling" : "waiting", state, idx);
}
mb(); /* state is changed by bnx2x_sp_event() */
- if (*state_p == state)
+ if (*state_p == state) {
+#ifdef BNX2X_STOP_ON_ERROR
+ DP(NETIF_MSG_IFUP, "exit (cnt %d)\n", 5000 - cnt);
+#endif
return 0;
+ }
msleep(1);
}
} else {
int port = BP_PORT(bp);
- DP(NETIF_MSG_IFUP, "NO MCP load counts before us %d, %d, %d\n",
+ DP(NETIF_MSG_IFUP, "NO MCP - load counts %d, %d, %d\n",
load_count[0], load_count[1], load_count[2]);
load_count[0]++;
load_count[1 + port]++;
- DP(NETIF_MSG_IFUP, "NO MCP new load counts %d, %d, %d\n",
+ DP(NETIF_MSG_IFUP, "NO MCP - new load counts %d, %d, %d\n",
load_count[0], load_count[1], load_count[2]);
if (load_count[0] == 1)
load_code = FW_MSG_CODE_DRV_LOAD_COMMON;
if (CHIP_IS_E1H(bp))
if (bp->mf_config & FUNC_MF_CFG_FUNC_DISABLED) {
- BNX2X_ERR("!!! mf_cfg function disabled\n");
+ DP(NETIF_MSG_IFUP, "mf_cfg function disabled\n");
bp->state = BNX2X_STATE_DISABLED;
}
bnx2x_set_mac_addr_e1h(bp, 1);
if (bp->port.pmf)
- bnx2x_initial_phy_init(bp);
+ bnx2x_initial_phy_init(bp, load_mode);
/* Start fast path */
switch (load_mode) {
netif_napi_del(&bnx2x_fp(bp, i, napi));
bnx2x_free_mem(bp);
- /* TBD we really need to reset the chip
- if we want to recover from this */
return rc;
}
static int bnx2x_stop_leading(struct bnx2x *bp)
{
- u16 dsb_sp_prod_idx;
+ __le16 dsb_sp_prod_idx;
/* if the other port is handling traffic,
this can take a lot of time */
int cnt = 500;
/* Send HALT ramrod */
bp->fp[0].state = BNX2X_FP_STATE_HALTING;
- bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_HALT, 0, 0, BP_CL_ID(bp), 0);
+ bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_HALT, 0, 0, bp->fp->cl_id, 0);
/* Wait for completion */
rc = bnx2x_wait_ramrod(bp, BNX2X_FP_STATE_HALTED, 0,
*bp->dsb_sp_prod, dsb_sp_prod_idx);
#ifdef BNX2X_STOP_ON_ERROR
bnx2x_panic();
-#else
- rc = -EBUSY;
#endif
+ rc = -EBUSY;
break;
}
cnt--;
struct bnx2x_fastpath *fp = &bp->fp[i];
cnt = 1000;
- smp_rmb();
while (bnx2x_has_tx_work_unload(fp)) {
- bnx2x_tx_int(fp, 1000);
+ bnx2x_tx_int(fp);
if (!cnt) {
BNX2X_ERR("timeout waiting for queue[%d]\n",
i);
}
cnt--;
msleep(1);
- smp_rmb();
}
}
/* Give HW time to discard old tx messages */
config->hdr.offset = BNX2X_MAX_EMUL_MULTI*(1 + port);
else
config->hdr.offset = BNX2X_MAX_MULTICAST*(1 + port);
- config->hdr.client_id = BP_CL_ID(bp);
+ config->hdr.client_id = bp->fp->cl_id;
config->hdr.reserved1 = 0;
bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_SET_MAC, 0,
if (!BP_NOMCP(bp))
reset_code = bnx2x_fw_command(bp, reset_code);
else {
- DP(NETIF_MSG_IFDOWN, "NO MCP load counts %d, %d, %d\n",
+ DP(NETIF_MSG_IFDOWN, "NO MCP - load counts %d, %d, %d\n",
load_count[0], load_count[1], load_count[2]);
load_count[0]--;
load_count[1 + port]--;
- DP(NETIF_MSG_IFDOWN, "NO MCP new load counts %d, %d, %d\n",
+ DP(NETIF_MSG_IFDOWN, "NO MCP - new load counts %d, %d, %d\n",
load_count[0], load_count[1], load_count[2]);
if (load_count[0] == 0)
reset_code = FW_MSG_CODE_DRV_UNLOAD_COMMON;
/* Report UNLOAD_DONE to MCP */
if (!BP_NOMCP(bp))
bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE);
+
bp->port.pmf = 0;
/* Free SKBs, SGEs, TPA pool and driver internals */
SHARED_HW_CFG_LED_MODE_MASK) >>
SHARED_HW_CFG_LED_MODE_SHIFT);
+ bp->link_params.feature_config_flags = 0;
+ val = SHMEM_RD(bp, dev_info.shared_feature_config.config);
+ if (val & SHARED_FEAT_CFG_OVERRIDE_PREEMPHASIS_CFG_ENABLED)
+ bp->link_params.feature_config_flags |=
+ FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED;
+ else
+ bp->link_params.feature_config_flags &=
+ ~FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED;
+
val = SHMEM_RD(bp, dev_info.bc_rev) >> 8;
bp->common.bc_ver = val;
BNX2X_DEV_INFO("bc_ver %X\n", val);
bp->flags |= NO_WOL_FLAG;
}
BNX2X_DEV_INFO("%sWoL capable\n",
- (bp->flags & NO_WOL_FLAG) ? "Not " : "");
+ (bp->flags & NO_WOL_FLAG) ? "not " : "");
val = SHMEM_RD(bp, dev_info.shared_hw_config.part_num);
val2 = SHMEM_RD(bp, dev_info.shared_hw_config.part_num[4]);
SUPPORTED_Asym_Pause);
break;
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
- BNX2X_DEV_INFO("ext_phy_type 0x%x (8705)\n",
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
+ BNX2X_DEV_INFO("ext_phy_type 0x%x (8072)\n",
ext_phy_type);
bp->port.supported |= (SUPPORTED_10000baseT_Full |
+ SUPPORTED_1000baseT_Full |
SUPPORTED_FIBRE |
+ SUPPORTED_Autoneg |
SUPPORTED_Pause |
SUPPORTED_Asym_Pause);
break;
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
- BNX2X_DEV_INFO("ext_phy_type 0x%x (8706)\n",
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
+ BNX2X_DEV_INFO("ext_phy_type 0x%x (8073)\n",
ext_phy_type);
bp->port.supported |= (SUPPORTED_10000baseT_Full |
+ SUPPORTED_2500baseX_Full |
SUPPORTED_1000baseT_Full |
SUPPORTED_FIBRE |
+ SUPPORTED_Autoneg |
SUPPORTED_Pause |
SUPPORTED_Asym_Pause);
break;
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
- BNX2X_DEV_INFO("ext_phy_type 0x%x (8072)\n",
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
+ BNX2X_DEV_INFO("ext_phy_type 0x%x (8705)\n",
ext_phy_type);
bp->port.supported |= (SUPPORTED_10000baseT_Full |
- SUPPORTED_1000baseT_Full |
SUPPORTED_FIBRE |
- SUPPORTED_Autoneg |
SUPPORTED_Pause |
SUPPORTED_Asym_Pause);
break;
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
- BNX2X_DEV_INFO("ext_phy_type 0x%x (8073)\n",
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
+ BNX2X_DEV_INFO("ext_phy_type 0x%x (8706)\n",
ext_phy_type);
bp->port.supported |= (SUPPORTED_10000baseT_Full |
- SUPPORTED_2500baseX_Full |
SUPPORTED_1000baseT_Full |
SUPPORTED_FIBRE |
+ SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause);
+ break;
+
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
+ BNX2X_DEV_INFO("ext_phy_type 0x%x (8726)\n",
+ ext_phy_type);
+
+ bp->port.supported |= (SUPPORTED_10000baseT_Full |
+ SUPPORTED_1000baseT_Full |
SUPPORTED_Autoneg |
+ SUPPORTED_FIBRE |
SUPPORTED_Pause |
SUPPORTED_Asym_Pause);
break;
SUPPORTED_Asym_Pause);
break;
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481:
+ BNX2X_DEV_INFO("ext_phy_type 0x%x (BCM8481)\n",
+ ext_phy_type);
+
+ bp->port.supported |= (SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full |
+ SUPPORTED_1000baseT_Full |
+ SUPPORTED_10000baseT_Full |
+ SUPPORTED_TP |
+ SUPPORTED_Autoneg |
+ SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause);
+ break;
+
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE:
BNX2X_ERR("XGXS PHY Failure detected 0x%x\n",
bp->link_params.ext_phy_config);
{
int port = BP_PORT(bp);
u32 val, val2;
+ u32 config;
+ u16 i;
bp->link_params.bp = bp;
bp->link_params.port = port;
- bp->link_params.serdes_config =
- SHMEM_RD(bp, dev_info.port_hw_config[port].serdes_config);
bp->link_params.lane_config =
SHMEM_RD(bp, dev_info.port_hw_config[port].lane_config);
bp->link_params.ext_phy_config =
bp->port.link_config =
SHMEM_RD(bp, dev_info.port_feature_config[port].link_config);
- BNX2X_DEV_INFO("serdes_config 0x%08x lane_config 0x%08x\n"
- KERN_INFO " ext_phy_config 0x%08x speed_cap_mask 0x%08x"
- " link_config 0x%08x\n",
- bp->link_params.serdes_config,
+ /* Get the 4 lanes xgxs config rx and tx */
+ for (i = 0; i < 2; i++) {
+ val = SHMEM_RD(bp,
+ dev_info.port_hw_config[port].xgxs_config_rx[i<<1]);
+ bp->link_params.xgxs_config_rx[i << 1] = ((val>>16) & 0xffff);
+ bp->link_params.xgxs_config_rx[(i << 1) + 1] = (val & 0xffff);
+
+ val = SHMEM_RD(bp,
+ dev_info.port_hw_config[port].xgxs_config_tx[i<<1]);
+ bp->link_params.xgxs_config_tx[i << 1] = ((val>>16) & 0xffff);
+ bp->link_params.xgxs_config_tx[(i << 1) + 1] = (val & 0xffff);
+ }
+
+ config = SHMEM_RD(bp, dev_info.port_feature_config[port].config);
+ if (config & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_ENABLED)
+ bp->link_params.feature_config_flags |=
+ FEATURE_CONFIG_MODULE_ENFORCMENT_ENABLED;
+ else
+ bp->link_params.feature_config_flags &=
+ ~FEATURE_CONFIG_MODULE_ENFORCMENT_ENABLED;
+
+ /* If the device is capable of WoL, set the default state according
+ * to the HW
+ */
+ bp->wol = (!(bp->flags & NO_WOL_FLAG) &&
+ (config & PORT_FEATURE_WOL_ENABLED));
+
+ BNX2X_DEV_INFO("lane_config 0x%08x ext_phy_config 0x%08x"
+ " speed_cap_mask 0x%08x link_config 0x%08x\n",
bp->link_params.lane_config,
bp->link_params.ext_phy_config,
bp->link_params.speed_cap_mask, bp->port.link_config);
"(0x%04x)\n",
func, bp->e1hov, bp->e1hov);
} else {
- BNX2X_DEV_INFO("Single function mode\n");
+ BNX2X_DEV_INFO("single function mode\n");
if (BP_E1HVN(bp)) {
BNX2X_ERR("!!! No valid E1HOV for func %d,"
" aborting\n", func);
/* Disable interrupt handling until HW is initialized */
atomic_set(&bp->intr_sem, 1);
+ smp_wmb(); /* Ensure that bp->intr_sem update is SMP-safe */
mutex_init(&bp->port.phy_mutex);
bp->dev->features |= NETIF_F_LRO;
}
+ bp->mrrs = mrrs;
bp->tx_ring_size = MAX_TX_AVAIL;
bp->rx_ring_size = MAX_RX_AVAIL;
switch (ext_phy_type) {
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
- case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
cmd->port = PORT_FIBRE;
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481:
cmd->port = PORT_TP;
break;
info->regdump_len = 0;
}
+#define IS_E1_ONLINE(info) (((info) & RI_E1_ONLINE) == RI_E1_ONLINE)
+#define IS_E1H_ONLINE(info) (((info) & RI_E1H_ONLINE) == RI_E1H_ONLINE)
+
+static int bnx2x_get_regs_len(struct net_device *dev)
+{
+ static u32 regdump_len;
+ struct bnx2x *bp = netdev_priv(dev);
+ int i;
+
+ if (regdump_len)
+ return regdump_len;
+
+ if (CHIP_IS_E1(bp)) {
+ for (i = 0; i < REGS_COUNT; i++)
+ if (IS_E1_ONLINE(reg_addrs[i].info))
+ regdump_len += reg_addrs[i].size;
+
+ for (i = 0; i < WREGS_COUNT_E1; i++)
+ if (IS_E1_ONLINE(wreg_addrs_e1[i].info))
+ regdump_len += wreg_addrs_e1[i].size *
+ (1 + wreg_addrs_e1[i].read_regs_count);
+
+ } else { /* E1H */
+ for (i = 0; i < REGS_COUNT; i++)
+ if (IS_E1H_ONLINE(reg_addrs[i].info))
+ regdump_len += reg_addrs[i].size;
+
+ for (i = 0; i < WREGS_COUNT_E1H; i++)
+ if (IS_E1H_ONLINE(wreg_addrs_e1h[i].info))
+ regdump_len += wreg_addrs_e1h[i].size *
+ (1 + wreg_addrs_e1h[i].read_regs_count);
+ }
+ regdump_len *= 4;
+ regdump_len += sizeof(struct dump_hdr);
+
+ return regdump_len;
+}
+
+static void bnx2x_get_regs(struct net_device *dev,
+ struct ethtool_regs *regs, void *_p)
+{
+ u32 *p = _p, i, j;
+ struct bnx2x *bp = netdev_priv(dev);
+ struct dump_hdr dump_hdr = {0};
+
+ regs->version = 0;
+ memset(p, 0, regs->len);
+
+ if (!netif_running(bp->dev))
+ return;
+
+ dump_hdr.hdr_size = (sizeof(struct dump_hdr) / 4) - 1;
+ dump_hdr.dump_sign = dump_sign_all;
+ dump_hdr.xstorm_waitp = REG_RD(bp, XSTORM_WAITP_ADDR);
+ dump_hdr.tstorm_waitp = REG_RD(bp, TSTORM_WAITP_ADDR);
+ dump_hdr.ustorm_waitp = REG_RD(bp, USTORM_WAITP_ADDR);
+ dump_hdr.cstorm_waitp = REG_RD(bp, CSTORM_WAITP_ADDR);
+ dump_hdr.info = CHIP_IS_E1(bp) ? RI_E1_ONLINE : RI_E1H_ONLINE;
+
+ memcpy(p, &dump_hdr, sizeof(struct dump_hdr));
+ p += dump_hdr.hdr_size + 1;
+
+ if (CHIP_IS_E1(bp)) {
+ for (i = 0; i < REGS_COUNT; i++)
+ if (IS_E1_ONLINE(reg_addrs[i].info))
+ for (j = 0; j < reg_addrs[i].size; j++)
+ *p++ = REG_RD(bp,
+ reg_addrs[i].addr + j*4);
+
+ } else { /* E1H */
+ for (i = 0; i < REGS_COUNT; i++)
+ if (IS_E1H_ONLINE(reg_addrs[i].info))
+ for (j = 0; j < reg_addrs[i].size; j++)
+ *p++ = REG_RD(bp,
+ reg_addrs[i].addr + j*4);
+ }
+}
+
static void bnx2x_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
struct bnx2x *bp = netdev_priv(dev);
return 0;
}
+static u32
+bnx2x_get_link(struct net_device *dev)
+{
+ struct bnx2x *bp = netdev_priv(dev);
+
+ return bp->link_vars.link_up;
+}
+
static int bnx2x_get_eeprom_len(struct net_device *dev)
{
struct bnx2x *bp = netdev_priv(dev);
MCPR_NVM_ACCESS_ENABLE_WR_EN)));
}
-static int bnx2x_nvram_read_dword(struct bnx2x *bp, u32 offset, u32 *ret_val,
+static int bnx2x_nvram_read_dword(struct bnx2x *bp, u32 offset, __be32 *ret_val,
u32 cmd_flags)
{
int count, i, rc;
/* we read nvram data in cpu order
* but ethtool sees it as an array of bytes
* converting to big-endian will do the work */
- val = cpu_to_be32(val);
- *ret_val = val;
+ *ret_val = cpu_to_be32(val);
rc = 0;
break;
}
{
int rc;
u32 cmd_flags;
- u32 val;
+ __be32 val;
if ((offset & 0x03) || (buf_size & 0x03) || (buf_size == 0)) {
DP(BNX2X_MSG_NVM,
int rc;
u32 cmd_flags;
u32 align_offset;
- u32 val;
+ __be32 val;
if (offset + buf_size > bp->common.flash_size) {
DP(BNX2X_MSG_NVM, "Invalid parameter: offset (0x%x) +"
if ((bp->state == BNX2X_STATE_OPEN) ||
(bp->state == BNX2X_STATE_DISABLED)) {
rc |= bnx2x_link_reset(&bp->link_params,
- &bp->link_vars);
+ &bp->link_vars, 1);
rc |= bnx2x_phy_init(&bp->link_params,
&bp->link_vars);
}
struct bnx2x *bp = netdev_priv(dev);
bp->rx_ticks = (u16) coal->rx_coalesce_usecs;
- if (bp->rx_ticks > 3000)
- bp->rx_ticks = 3000;
+ if (bp->rx_ticks > BNX2X_MAX_COALESCE_TOUT)
+ bp->rx_ticks = BNX2X_MAX_COALESCE_TOUT;
bp->tx_ticks = (u16) coal->tx_coalesce_usecs;
- if (bp->tx_ticks > 0x3000)
- bp->tx_ticks = 0x3000;
+ if (bp->tx_ticks > BNX2X_MAX_COALESCE_TOUT)
+ bp->tx_ticks = BNX2X_MAX_COALESCE_TOUT;
if (netif_running(dev))
bnx2x_update_coalesce(bp);
{
struct bnx2x *bp = netdev_priv(dev);
- epause->autoneg = (bp->link_params.req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO) &&
+ epause->autoneg = (bp->link_params.req_flow_ctrl ==
+ BNX2X_FLOW_CTRL_AUTO) &&
(bp->link_params.req_line_speed == SPEED_AUTO_NEG);
epause->rx_pause = ((bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_RX) ==
if (data) {
dev->features |= (NETIF_F_TSO | NETIF_F_TSO_ECN);
dev->features |= NETIF_F_TSO6;
+#ifdef BCM_VLAN
+ dev->vlan_features |= (NETIF_F_TSO | NETIF_F_TSO_ECN);
+ dev->vlan_features |= NETIF_F_TSO6;
+#endif
} else {
dev->features &= ~(NETIF_F_TSO | NETIF_F_TSO_ECN);
dev->features &= ~NETIF_F_TSO6;
+#ifdef BCM_VLAN
+ dev->vlan_features &= ~(NETIF_F_TSO | NETIF_F_TSO_ECN);
+ dev->vlan_features &= ~NETIF_F_TSO6;
+#endif
}
return 0;
u16 len;
int rc = -ENODEV;
- if (loopback_mode == BNX2X_MAC_LOOPBACK) {
+ /* check the loopback mode */
+ switch (loopback_mode) {
+ case BNX2X_PHY_LOOPBACK:
+ if (bp->link_params.loopback_mode != LOOPBACK_XGXS_10)
+ return -EINVAL;
+ break;
+ case BNX2X_MAC_LOOPBACK:
bp->link_params.loopback_mode = LOOPBACK_BMAC;
bnx2x_phy_init(&bp->link_params, &bp->link_vars);
-
- } else if (loopback_mode == BNX2X_PHY_LOOPBACK) {
- u16 cnt = 1000;
- bp->link_params.loopback_mode = LOOPBACK_XGXS_10;
- bnx2x_phy_init(&bp->link_params, &bp->link_vars);
- /* wait until link state is restored */
- if (link_up)
- while (cnt-- && bnx2x_test_link(&bp->link_params,
- &bp->link_vars))
- msleep(10);
- } else
+ break;
+ default:
return -EINVAL;
+ }
- pkt_size = 1514;
+ /* prepare the loopback packet */
+ pkt_size = (((bp->dev->mtu < ETH_MAX_PACKET_SIZE) ?
+ bp->dev->mtu : ETH_MAX_PACKET_SIZE) + ETH_HLEN);
skb = netdev_alloc_skb(bp->dev, bp->rx_buf_size);
if (!skb) {
rc = -ENOMEM;
for (i = ETH_HLEN; i < pkt_size; i++)
packet[i] = (unsigned char) (i & 0xff);
+ /* send the loopback packet */
num_pkts = 0;
tx_start_idx = le16_to_cpu(*fp->tx_cons_sb);
rx_start_idx = le16_to_cpu(*fp->rx_cons_sb);
wmb();
- fp->hw_tx_prods->bds_prod =
- cpu_to_le16(le16_to_cpu(fp->hw_tx_prods->bds_prod) + 1);
+ le16_add_cpu(&fp->hw_tx_prods->bds_prod, 1);
mb(); /* FW restriction: must not reorder writing nbd and packets */
- fp->hw_tx_prods->packets_prod =
- cpu_to_le32(le32_to_cpu(fp->hw_tx_prods->packets_prod) + 1);
- DOORBELL(bp, FP_IDX(fp), 0);
+ le32_add_cpu(&fp->hw_tx_prods->packets_prod, 1);
+ DOORBELL(bp, fp->index, 0);
mmiowb();
static int bnx2x_test_loopback(struct bnx2x *bp, u8 link_up)
{
- int rc = 0;
+ int rc = 0, res;
if (!netif_running(bp->dev))
return BNX2X_LOOPBACK_FAILED;
bnx2x_netif_stop(bp, 1);
bnx2x_acquire_phy_lock(bp);
- if (bnx2x_run_loopback(bp, BNX2X_MAC_LOOPBACK, link_up)) {
- DP(NETIF_MSG_PROBE, "MAC loopback failed\n");
- rc |= BNX2X_MAC_LOOPBACK_FAILED;
+ res = bnx2x_run_loopback(bp, BNX2X_PHY_LOOPBACK, link_up);
+ if (res) {
+ DP(NETIF_MSG_PROBE, " PHY loopback failed (res %d)\n", res);
+ rc |= BNX2X_PHY_LOOPBACK_FAILED;
}
- if (bnx2x_run_loopback(bp, BNX2X_PHY_LOOPBACK, link_up)) {
- DP(NETIF_MSG_PROBE, "PHY loopback failed\n");
- rc |= BNX2X_PHY_LOOPBACK_FAILED;
+ res = bnx2x_run_loopback(bp, BNX2X_MAC_LOOPBACK, link_up);
+ if (res) {
+ DP(NETIF_MSG_PROBE, " MAC loopback failed (res %d)\n", res);
+ rc |= BNX2X_MAC_LOOPBACK_FAILED;
}
bnx2x_release_phy_lock(bp);
{ 0x778, 0x70 },
{ 0, 0 }
};
- u32 buf[0x350 / 4];
+ __be32 buf[0x350 / 4];
u8 *data = (u8 *)buf;
int i, rc;
u32 magic, csum;
rc = bnx2x_nvram_read(bp, 0, data, 4);
if (rc) {
- DP(NETIF_MSG_PROBE, "magic value read (rc -%d)\n", -rc);
+ DP(NETIF_MSG_PROBE, "magic value read (rc %d)\n", rc);
goto test_nvram_exit;
}
nvram_tbl[i].size);
if (rc) {
DP(NETIF_MSG_PROBE,
- "nvram_tbl[%d] read data (rc -%d)\n", i, -rc);
+ "nvram_tbl[%d] read data (rc %d)\n", i, rc);
goto test_nvram_exit;
}
config->hdr.offset = (BP_PORT(bp) ? 32 : 0);
else
config->hdr.offset = BP_FUNC(bp);
- config->hdr.client_id = BP_CL_ID(bp);
+ config->hdr.client_id = bp->fp->cl_id;
config->hdr.reserved1 = 0;
rc = bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_SET_MAC, 0,
etest->flags &= ~ETH_TEST_FL_OFFLINE;
if (etest->flags & ETH_TEST_FL_OFFLINE) {
+ int port = BP_PORT(bp);
+ u32 val;
u8 link_up;
+ /* save current value of input enable for TX port IF */
+ val = REG_RD(bp, NIG_REG_EGRESS_UMP0_IN_EN + port*4);
+ /* disable input for TX port IF */
+ REG_WR(bp, NIG_REG_EGRESS_UMP0_IN_EN + port*4, 0);
+
link_up = bp->link_vars.link_up;
bnx2x_nic_unload(bp, UNLOAD_NORMAL);
bnx2x_nic_load(bp, LOAD_DIAG);
etest->flags |= ETH_TEST_FL_FAILED;
bnx2x_nic_unload(bp, UNLOAD_NORMAL);
+
+ /* restore input for TX port IF */
+ REG_WR(bp, NIG_REG_EGRESS_UMP0_IN_EN + port*4, val);
+
bnx2x_nic_load(bp, LOAD_NORMAL);
/* wait until link state is restored */
bnx2x_wait_for_link(bp, link_up);
.get_settings = bnx2x_get_settings,
.set_settings = bnx2x_set_settings,
.get_drvinfo = bnx2x_get_drvinfo,
+ .get_regs_len = bnx2x_get_regs_len,
+ .get_regs = bnx2x_get_regs,
.get_wol = bnx2x_get_wol,
.set_wol = bnx2x_set_wol,
.get_msglevel = bnx2x_get_msglevel,
.set_msglevel = bnx2x_set_msglevel,
.nway_reset = bnx2x_nway_reset,
- .get_link = ethtool_op_get_link,
+ .get_link = bnx2x_get_link,
.get_eeprom_len = bnx2x_get_eeprom_len,
.get_eeprom = bnx2x_get_eeprom,
.set_eeprom = bnx2x_set_eeprom,
bnx2x_update_fpsb_idx(fp);
if (bnx2x_has_tx_work(fp))
- bnx2x_tx_int(fp, budget);
+ bnx2x_tx_int(fp);
- if (bnx2x_has_rx_work(fp))
+ if (bnx2x_has_rx_work(fp)) {
work_done = bnx2x_rx_int(fp, budget);
- rmb(); /* BNX2X_HAS_WORK() reads the status block */
- /* must not complete if we consumed full budget */
- if ((work_done < budget) && !BNX2X_HAS_WORK(fp)) {
+ /* must not complete if we consumed full budget */
+ if (work_done >= budget)
+ goto poll_again;
+ }
+ /* BNX2X_HAS_WORK() reads the status block, thus we need to
+ * ensure that status block indices have been actually read
+ * (bnx2x_update_fpsb_idx) prior to this check (BNX2X_HAS_WORK)
+ * so that we won't write the "newer" value of the status block to IGU
+ * (if there was a DMA right after BNX2X_HAS_WORK and
+ * if there is no rmb, the memory reading (bnx2x_update_fpsb_idx)
+ * may be postponed to right before bnx2x_ack_sb). In this case
+ * there will never be another interrupt until there is another update
+ * of the status block, while there is still unhandled work.
+ */
+ rmb();
+
+ if (!BNX2X_HAS_WORK(fp)) {
#ifdef BNX2X_STOP_ON_ERROR
poll_panic:
#endif
napi_complete(napi);
- bnx2x_ack_sb(bp, FP_SB_ID(fp), USTORM_ID,
+ bnx2x_ack_sb(bp, fp->sb_id, USTORM_ID,
le16_to_cpu(fp->fp_u_idx), IGU_INT_NOP, 1);
- bnx2x_ack_sb(bp, FP_SB_ID(fp), CSTORM_ID,
+ bnx2x_ack_sb(bp, fp->sb_id, CSTORM_ID,
le16_to_cpu(fp->fp_c_idx), IGU_INT_ENABLE, 1);
}
+
+poll_again:
return work_done;
}
rc = XMIT_PLAIN;
else {
- if (skb->protocol == ntohs(ETH_P_IPV6)) {
+ if (skb->protocol == htons(ETH_P_IPV6)) {
rc = XMIT_CSUM_V6;
if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
rc |= XMIT_CSUM_TCP;
}
#if (MAX_SKB_FRAGS >= MAX_FETCH_BD - 3)
-/* check if packet requires linearization (packet is too fragmented) */
+/* check if packet requires linearization (packet is too fragmented)
+ no need to check fragmentation if page size > 8K (there will be no
+ violation to FW restrictions) */
static int bnx2x_pkt_req_lin(struct bnx2x *bp, struct sk_buff *skb,
u32 xmit_type)
{
wnd_sum -=
skb_shinfo(skb)->frags[wnd_idx].size;
}
-
} else {
/* in non-LSO too fragmented packet should always
be linearized */
ip_hdr(skb)->protocol, skb_shinfo(skb)->gso_type, xmit_type);
#if (MAX_SKB_FRAGS >= MAX_FETCH_BD - 3)
- /* First, check if we need to linearize the skb
- (due to FW restrictions) */
+ /* First, check if we need to linearize the skb (due to FW
+ restrictions). No need to check fragmentation if page size > 8K
+ (there will be no violation to FW restrictions) */
if (bnx2x_pkt_req_lin(bp, skb, xmit_type)) {
/* Statistics of linearization */
bp->lin_cnt++;
hlen = (skb_network_header(skb) - skb->data + vlan_off) / 2;
/* for now NS flag is not used in Linux */
- pbd->global_data = (hlen |
- ((skb->protocol == ntohs(ETH_P_8021Q)) <<
- ETH_TX_PARSE_BD_LLC_SNAP_EN_SHIFT));
+ pbd->global_data =
+ (hlen | ((skb->protocol == cpu_to_be16(ETH_P_8021Q)) <<
+ ETH_TX_PARSE_BD_LLC_SNAP_EN_SHIFT));
pbd->ip_hlen = (skb_transport_header(skb) -
skb_network_header(skb)) / 2;
*/
wmb();
- fp->hw_tx_prods->bds_prod =
- cpu_to_le16(le16_to_cpu(fp->hw_tx_prods->bds_prod) + nbd);
+ le16_add_cpu(&fp->hw_tx_prods->bds_prod, nbd);
mb(); /* FW restriction: must not reorder writing nbd and packets */
- fp->hw_tx_prods->packets_prod =
- cpu_to_le32(le32_to_cpu(fp->hw_tx_prods->packets_prod) + 1);
- DOORBELL(bp, FP_IDX(fp), 0);
+ le32_add_cpu(&fp->hw_tx_prods->packets_prod, 1);
+ DOORBELL(bp, fp->index, 0);
mmiowb();
fp->tx_bd_prod += nbd;
- dev->trans_start = jiffies;
if (unlikely(bnx2x_tx_avail(fp) < MAX_SKB_FRAGS + 3)) {
/* We want bnx2x_tx_int to "see" the updated tx_bd_prod
return 0;
}
-/* called with netif_tx_lock from set_multicast */
+/* called with netif_tx_lock from dev_mcast.c */
static void bnx2x_set_rx_mode(struct net_device *dev)
{
struct bnx2x *bp = netdev_priv(dev);
.ndo_open = bnx2x_open,
.ndo_stop = bnx2x_close,
.ndo_start_xmit = bnx2x_start_xmit,
- .ndo_set_multicast_list = bnx2x_set_rx_mode,
+ .ndo_set_multicast_list = bnx2x_set_rx_mode,
.ndo_set_mac_address = bnx2x_change_mac_addr,
.ndo_validate_addr = eth_validate_addr,
.ndo_do_ioctl = bnx2x_ioctl,
#endif
};
-
static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
struct net_device *dev)
{
goto err_out_release;
}
- if (pci_set_dma_mask(pdev, DMA_64BIT_MASK) == 0) {
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) == 0) {
bp->flags |= USING_DAC_FLAG;
- if (pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK) != 0) {
+ if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)) != 0) {
printk(KERN_ERR PFX "pci_set_consistent_dma_mask"
" failed, aborting\n");
rc = -EIO;
goto err_out_release;
}
- } else if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) != 0) {
+ } else if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) {
printk(KERN_ERR PFX "System does not support DMA,"
" aborting\n");
rc = -EIO;
dev->features |= NETIF_F_HW_CSUM;
if (bp->flags & USING_DAC_FLAG)
dev->features |= NETIF_F_HIGHDMA;
+ dev->features |= (NETIF_F_TSO | NETIF_F_TSO_ECN);
+ dev->features |= NETIF_F_TSO6;
#ifdef BCM_VLAN
dev->features |= (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX);
bp->flags |= (HW_VLAN_RX_FLAG | HW_VLAN_TX_FLAG);
+
+ dev->vlan_features |= NETIF_F_SG;
+ dev->vlan_features |= NETIF_F_HW_CSUM;
+ if (bp->flags & USING_DAC_FLAG)
+ dev->vlan_features |= NETIF_F_HIGHDMA;
+ dev->vlan_features |= (NETIF_F_TSO | NETIF_F_TSO_ECN);
+ dev->vlan_features |= NETIF_F_TSO6;
#endif
- dev->features |= (NETIF_F_TSO | NETIF_F_TSO_ECN);
- dev->features |= NETIF_F_TSO6;
return 0;
val = (val & PCICFG_LINK_SPEED) >> PCICFG_LINK_SPEED_SHIFT;
return val;
}
+static int __devinit bnx2x_check_firmware(struct bnx2x *bp)
+{
+ struct bnx2x_fw_file_hdr *fw_hdr;
+ struct bnx2x_fw_file_section *sections;
+ u16 *ops_offsets;
+ u32 offset, len, num_ops;
+ int i;
+ const struct firmware *firmware = bp->firmware;
+ const u8 * fw_ver;
+
+ if (firmware->size < sizeof(struct bnx2x_fw_file_hdr))
+ return -EINVAL;
+
+ fw_hdr = (struct bnx2x_fw_file_hdr *)firmware->data;
+ sections = (struct bnx2x_fw_file_section *)fw_hdr;
+
+ /* Make sure none of the offsets and sizes make us read beyond
+ * the end of the firmware data */
+ for (i = 0; i < sizeof(*fw_hdr) / sizeof(*sections); i++) {
+ offset = be32_to_cpu(sections[i].offset);
+ len = be32_to_cpu(sections[i].len);
+ if (offset + len > firmware->size) {
+ printk(KERN_ERR PFX "Section %d length is out of bounds\n", i);
+ return -EINVAL;
+ }
+ }
+
+ /* Likewise for the init_ops offsets */
+ offset = be32_to_cpu(fw_hdr->init_ops_offsets.offset);
+ ops_offsets = (u16 *)(firmware->data + offset);
+ num_ops = be32_to_cpu(fw_hdr->init_ops.len) / sizeof(struct raw_op);
+
+ for (i = 0; i < be32_to_cpu(fw_hdr->init_ops_offsets.len) / 2; i++) {
+ if (be16_to_cpu(ops_offsets[i]) > num_ops) {
+ printk(KERN_ERR PFX "Section offset %d is out of bounds\n", i);
+ return -EINVAL;
+ }
+ }
+
+ /* Check FW version */
+ offset = be32_to_cpu(fw_hdr->fw_version.offset);
+ fw_ver = firmware->data + offset;
+ if ((fw_ver[0] != BCM_5710_FW_MAJOR_VERSION) ||
+ (fw_ver[1] != BCM_5710_FW_MINOR_VERSION) ||
+ (fw_ver[2] != BCM_5710_FW_REVISION_VERSION) ||
+ (fw_ver[3] != BCM_5710_FW_ENGINEERING_VERSION)) {
+ printk(KERN_ERR PFX "Bad FW version:%d.%d.%d.%d."
+ " Should be %d.%d.%d.%d\n",
+ fw_ver[0], fw_ver[1], fw_ver[2],
+ fw_ver[3], BCM_5710_FW_MAJOR_VERSION,
+ BCM_5710_FW_MINOR_VERSION,
+ BCM_5710_FW_REVISION_VERSION,
+ BCM_5710_FW_ENGINEERING_VERSION);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void inline be32_to_cpu_n(const u8 *_source, u8 *_target, u32 n)
+{
+ u32 i;
+ const __be32 *source = (const __be32*)_source;
+ u32 *target = (u32*)_target;
+
+ for (i = 0; i < n/4; i++)
+ target[i] = be32_to_cpu(source[i]);
+}
+
+/*
+ Ops array is stored in the following format:
+ {op(8bit), offset(24bit, big endian), data(32bit, big endian)}
+ */
+static void inline bnx2x_prep_ops(const u8 *_source, u8 *_target, u32 n)
+{
+ u32 i, j, tmp;
+ const __be32 *source = (const __be32*)_source;
+ struct raw_op *target = (struct raw_op*)_target;
+
+ for (i = 0, j = 0; i < n/8; i++, j+=2) {
+ tmp = be32_to_cpu(source[j]);
+ target[i].op = (tmp >> 24) & 0xff;
+ target[i].offset = tmp & 0xffffff;
+ target[i].raw_data = be32_to_cpu(source[j+1]);
+ }
+}
+static void inline be16_to_cpu_n(const u8 *_source, u8 *_target, u32 n)
+{
+ u32 i;
+ u16 *target = (u16*)_target;
+ const __be16 *source = (const __be16*)_source;
+
+ for (i = 0; i < n/2; i++)
+ target[i] = be16_to_cpu(source[i]);
+}
+
+#define BNX2X_ALLOC_AND_SET(arr, lbl, func) \
+ do { \
+ u32 len = be32_to_cpu(fw_hdr->arr.len); \
+ bp->arr = kmalloc(len, GFP_KERNEL); \
+ if (!bp->arr) { \
+ printk(KERN_ERR PFX "Failed to allocate %d bytes for "#arr"\n", len); \
+ goto lbl; \
+ } \
+ func(bp->firmware->data + \
+ be32_to_cpu(fw_hdr->arr.offset), \
+ (u8*)bp->arr, len); \
+ } while (0)
+
+
+static int __devinit bnx2x_init_firmware(struct bnx2x *bp, struct device *dev)
+{
+ char fw_file_name[40] = {0};
+ int rc, offset;
+ struct bnx2x_fw_file_hdr *fw_hdr;
+
+ /* Create a FW file name */
+ if (CHIP_IS_E1(bp))
+ offset = sprintf(fw_file_name, FW_FILE_PREFIX_E1);
+ else
+ offset = sprintf(fw_file_name, FW_FILE_PREFIX_E1H);
+
+ sprintf(fw_file_name + offset, "%d.%d.%d.%d.fw",
+ BCM_5710_FW_MAJOR_VERSION,
+ BCM_5710_FW_MINOR_VERSION,
+ BCM_5710_FW_REVISION_VERSION,
+ BCM_5710_FW_ENGINEERING_VERSION);
+
+ printk(KERN_INFO PFX "Loading %s\n", fw_file_name);
+
+ rc = request_firmware(&bp->firmware, fw_file_name, dev);
+ if (rc) {
+ printk(KERN_ERR PFX "Can't load firmware file %s\n", fw_file_name);
+ goto request_firmware_exit;
+ }
+
+ rc = bnx2x_check_firmware(bp);
+ if (rc) {
+ printk(KERN_ERR PFX "Corrupt firmware file %s\n", fw_file_name);
+ goto request_firmware_exit;
+ }
+
+ fw_hdr = (struct bnx2x_fw_file_hdr *)bp->firmware->data;
+
+ /* Initialize the pointers to the init arrays */
+ /* Blob */
+ BNX2X_ALLOC_AND_SET(init_data, request_firmware_exit, be32_to_cpu_n);
+
+ /* Opcodes */
+ BNX2X_ALLOC_AND_SET(init_ops, init_ops_alloc_err, bnx2x_prep_ops);
+
+ /* Offsets */
+ BNX2X_ALLOC_AND_SET(init_ops_offsets, init_offsets_alloc_err, be16_to_cpu_n);
+
+ /* STORMs firmware */
+ bp->tsem_int_table_data = bp->firmware->data +
+ be32_to_cpu(fw_hdr->tsem_int_table_data.offset);
+ bp->tsem_pram_data = bp->firmware->data +
+ be32_to_cpu(fw_hdr->tsem_pram_data.offset);
+ bp->usem_int_table_data = bp->firmware->data +
+ be32_to_cpu(fw_hdr->usem_int_table_data.offset);
+ bp->usem_pram_data = bp->firmware->data +
+ be32_to_cpu(fw_hdr->usem_pram_data.offset);
+ bp->xsem_int_table_data = bp->firmware->data +
+ be32_to_cpu(fw_hdr->xsem_int_table_data.offset);
+ bp->xsem_pram_data = bp->firmware->data +
+ be32_to_cpu(fw_hdr->xsem_pram_data.offset);
+ bp->csem_int_table_data = bp->firmware->data +
+ be32_to_cpu(fw_hdr->csem_int_table_data.offset);
+ bp->csem_pram_data = bp->firmware->data +
+ be32_to_cpu(fw_hdr->csem_pram_data.offset);
+
+ return 0;
+init_offsets_alloc_err:
+ kfree(bp->init_ops);
+init_ops_alloc_err:
+ kfree(bp->init_data);
+request_firmware_exit:
+ release_firmware(bp->firmware);
+
+ return rc;
+}
+
+
static int __devinit bnx2x_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
if (rc)
goto init_one_exit;
+ /* Set init arrays */
+ rc = bnx2x_init_firmware(bp, &pdev->dev);
+ if (rc) {
+ printk(KERN_ERR PFX "Error loading firmware\n");
+ goto init_one_exit;
+ }
+
rc = register_netdev(dev);
if (rc) {
dev_err(&pdev->dev, "Cannot register net device\n");
(bnx2x_get_pcie_speed(bp) == 2) ? "5GHz (Gen2)" : "2.5GHz",
dev->base_addr, bp->pdev->irq);
printk(KERN_CONT "node addr %pM\n", dev->dev_addr);
+
return 0;
init_one_exit:
unregister_netdev(dev);
+ kfree(bp->init_ops_offsets);
+ kfree(bp->init_ops);
+ kfree(bp->init_data);
+ release_firmware(bp->firmware);
+
if (bp->regview)
iounmap(bp->regview);
static struct pci_error_handlers bnx2x_err_handler = {
.error_detected = bnx2x_io_error_detected,
- .slot_reset = bnx2x_io_slot_reset,
- .resume = bnx2x_io_resume,
+ .slot_reset = bnx2x_io_slot_reset,
+ .resume = bnx2x_io_resume,
};
static struct pci_driver bnx2x_pci_driver = {
static int __init bnx2x_init(void)
{
+ int ret;
+
bnx2x_wq = create_singlethread_workqueue("bnx2x");
if (bnx2x_wq == NULL) {
printk(KERN_ERR PFX "Cannot create workqueue\n");
return -ENOMEM;
}
- return pci_register_driver(&bnx2x_pci_driver);
+ ret = pci_register_driver(&bnx2x_pci_driver);
+ if (ret) {
+ printk(KERN_ERR PFX "Cannot register driver\n");
+ destroy_workqueue(bnx2x_wq);
+ }
+ return ret;
}
static void __exit bnx2x_cleanup(void)
module_init(bnx2x_init);
module_exit(bnx2x_cleanup);
+
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff