#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/compiler.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/ioport.h>
module_param_array(dynamic_ipg, bool, NULL, 0);
MODULE_PARM_DESC(dynamic_ipg, "Enable or Disable dynamic IPG, 1: Enable, 0: Disable");
-static struct pci_device_id amd8111e_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(amd8111e_pci_tbl) = {
{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD8111E_7462,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
/* Schedule a polling routine */
__napi_schedule(&lp->napi);
} else if (intren0 & RINTEN0) {
- printk("************Driver bug! \
- interrupt while in poll\n");
+ printk("************Driver bug! interrupt while in poll\n");
/* Fix by disable receive interrupts */
writel(RINTEN0, mmio + INTEN0);
}
This function will queue the transmit packets to the descriptors and will trigger the send operation. It also initializes the transmit descriptors with buffer physical address, byte count, ownership to hardware etc.
*/
-static int amd8111e_start_xmit(struct sk_buff *skb, struct net_device * dev)
+static netdev_tx_t amd8111e_start_xmit(struct sk_buff *skb,
+ struct net_device * dev)
{
struct amd8111e_priv *lp = netdev_priv(dev);
int tx_index;
writel( VAL1 | TDMD0, lp->mmio + CMD0);
writel( VAL2 | RDMD0,lp->mmio + CMD0);
- dev->trans_start = jiffies;
-
if(amd8111e_tx_queue_avail(lp) < 0){
netif_stop_queue(dev);
}
*/
static void amd8111e_set_multicast_list(struct net_device *dev)
{
- struct dev_mc_list* mc_ptr;
+ struct netdev_hw_addr *ha;
struct amd8111e_priv *lp = netdev_priv(dev);
u32 mc_filter[2] ;
- int i,bit_num;
+ int bit_num;
+
if(dev->flags & IFF_PROMISC){
writel( VAL2 | PROM, lp->mmio + CMD2);
return;
}
else
writel( PROM, lp->mmio + CMD2);
- if(dev->flags & IFF_ALLMULTI || dev->mc_count > MAX_FILTER_SIZE){
+ if (dev->flags & IFF_ALLMULTI ||
+ netdev_mc_count(dev) > MAX_FILTER_SIZE) {
/* get all multicast packet */
mc_filter[1] = mc_filter[0] = 0xffffffff;
- lp->mc_list = dev->mc_list;
lp->options |= OPTION_MULTICAST_ENABLE;
amd8111e_writeq(*(u64*)mc_filter,lp->mmio + LADRF);
return;
}
- if( dev->mc_count == 0 ){
+ if (netdev_mc_empty(dev)) {
/* get only own packets */
mc_filter[1] = mc_filter[0] = 0;
- lp->mc_list = NULL;
lp->options &= ~OPTION_MULTICAST_ENABLE;
amd8111e_writeq(*(u64*)mc_filter,lp->mmio + LADRF);
/* disable promiscous mode */
}
/* load all the multicast addresses in the logic filter */
lp->options |= OPTION_MULTICAST_ENABLE;
- lp->mc_list = dev->mc_list;
mc_filter[1] = mc_filter[0] = 0;
- for (i = 0, mc_ptr = dev->mc_list; mc_ptr && i < dev->mc_count;
- i++, mc_ptr = mc_ptr->next) {
- bit_num = (ether_crc_le(ETH_ALEN, mc_ptr->dmi_addr) >> 26) & 0x3f;
+ netdev_for_each_mc_addr(ha, dev) {
+ bit_num = (ether_crc_le(ETH_ALEN, ha->addr) >> 26) & 0x3f;
mc_filter[bit_num >> 5] |= 1 << (bit_num & 31);
}
amd8111e_writeq(*(u64*)mc_filter,lp->mmio+ LADRF);
int err;
u32 mii_regval;
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
-
switch(cmd) {
case SIOCGMIIPHY:
data->phy_id = lp->ext_phy_addr;
readl(lp->mmio + CMD7);
return 0;
}
-/* This function is called when a packet transmission fails to complete within a resonable period, on the assumption that an interrupts have been failed or the interface is locked up. This function will reinitialize the hardware */
+/*
+ * This function is called when a packet transmission fails to complete
+ * within a reasonable period, on the assumption that an interrupt have
+ * failed or the interface is locked up. This function will reinitialize
+ * the hardware.
+ */
static void amd8111e_tx_timeout(struct net_device *dev)
{
struct amd8111e_priv* lp = netdev_priv(dev);