[PATCH] mv643xx_eth: Remove BIT0-BIT31 #defines

[safe/jmp/linux-2.6] / drivers / net / Kconfig

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index ae8037a..11ca9f0 100644 (file)
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -66,7 +66,7 @@ config BONDING
          'Trunking' by Sun, 802.3ad by the IEEE, and 'Bonding' in Linux.
 
          The driver supports multiple bonding modes to allow for both high
-         perfomance and high availability operation.
+         performance and high availability operation.
 
          Refer to <file:Documentation/networking/bonding.txt> for more
          information.
@@ -698,8 +698,8 @@ config VORTEX
        depends on NET_VENDOR_3COM && (PCI || EISA)
        select MII
        ---help---
-         This option enables driver support for a large number of 10mbps and
-         10/100mbps EISA, PCI and PCMCIA 3Com network cards:
+         This option enables driver support for a large number of 10Mbps and
+         10/100Mbps EISA, PCI and PCMCIA 3Com network cards:
 
          "Vortex"    (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI
          "Boomerang" (EtherLink XL 3c900 or 3c905)            PCI
@@ -1021,7 +1021,7 @@ config EEXPRESS_PRO
        depends on NET_ISA
        ---help---
          If you have a network (Ethernet) card of this type, say Y. This
-         driver supports intel i82595{FX,TX} based boards. Note however
+         driver supports Intel i82595{FX,TX} based boards. Note however
          that the EtherExpress PRO/100 Ethernet card has its own separate
          driver.  Please read the Ethernet-HOWTO, available from
          <http://www.tldp.org/docs.html#howto>.
@@ -1207,7 +1207,7 @@ config IBM_EMAC_RX_SKB_HEADROOM
        help
          Additional receive skb headroom. Note, that driver
          will always reserve at least 2 bytes to make IP header
-         aligned, so usualy there is no need to add any additional
+         aligned, so usually there is no need to add any additional
          headroom.
          
          If unsure, set to 0.
@@ -1933,7 +1933,7 @@ config MYRI_SBUS
          will be called myri_sbus.  This is recommended.
 
 config NS83820
-       tristate "National Semiconduct DP83820 support"
+       tristate "National Semiconductor DP83820 support"
        depends on PCI
        help
          This is a driver for the National Semiconductor DP83820 series
@@ -2020,8 +2020,8 @@ config SIS190
          will be called sis190.  This is recommended.
 
 config SKGE
-       tristate "New SysKonnect GigaEthernet support (EXPERIMENTAL)"
-       depends on PCI && EXPERIMENTAL
+       tristate "New SysKonnect GigaEthernet support"
+       depends on PCI
        select CRC32
        ---help---
          This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx
@@ -2194,6 +2194,7 @@ config GFAR_NAPI
 config MV643XX_ETH
        tristate "MV-643XX Ethernet support"
        depends on MOMENCO_OCELOT_C || MOMENCO_JAGUAR_ATX || MV64360 || MOMENCO_OCELOT_3 || PPC_MULTIPLATFORM
+       select MII
        help
          This driver supports the gigabit Ethernet on the Marvell MV643XX
          chipset which is used in the Momenco Ocelot C and Jaguar ATX and
@@ -2513,7 +2514,7 @@ config PPP_FILTER
          Say Y here if you want to be able to filter the packets passing over
          PPP interfaces.  This allows you to control which packets count as
          activity (i.e. which packets will reset the idle timer or bring up
-         a demand-dialled link) and which packets are to be dropped entirely.
+         a demand-dialed link) and which packets are to be dropped entirely.
          You need to say Y here if you wish to use the pass-filter and
          active-filter options to pppd.
 
@@ -2701,8 +2702,8 @@ config SHAPER
          <file:Documentation/networking/shaper.txt> for more information.
 
          An alternative to this traffic shaper is the experimental
-         Class-Based Queueing (CBQ) scheduling support which you get if you
-         say Y to "QoS and/or fair queueing" above.
+         Class-Based Queuing (CBQ) scheduling support which you get if you
+         say Y to "QoS and/or fair queuing" above.
 
          To compile this driver as a module, choose M here: the module
          will be called shaper.  If unsure, say N.