#include <linux/errno.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
+#include <linux/if_ether.h>
#include <linux/skbuff.h>
-#include <linux/slab.h>
#include <linux/init.h>
#include <linux/bitops.h>
/* Information that need to be kept for each board. */
struct net_local {
- struct net_device_stats stats;
int last_restart;
ushort rx_head;
ushort rx_tail;
static int el16_probe1(struct net_device *dev, int ioaddr);
static int el16_open(struct net_device *dev);
-static int el16_send_packet(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t el16_send_packet(struct sk_buff *skb,
+ struct net_device *dev);
static irqreturn_t el16_interrupt(int irq, void *dev_id);
static void el16_rx(struct net_device *dev);
static int el16_close(struct net_device *dev);
-static struct net_device_stats *el16_get_stats(struct net_device *dev);
static void el16_tx_timeout (struct net_device *dev);
static void hardware_send_packet(struct net_device *dev, void *buf, short length, short pad);
return ERR_PTR(err);
}
+static const struct net_device_ops netdev_ops = {
+ .ndo_open = el16_open,
+ .ndo_stop = el16_close,
+ .ndo_start_xmit = el16_send_packet,
+ .ndo_tx_timeout = el16_tx_timeout,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
static int __init el16_probe1(struct net_device *dev, int ioaddr)
{
- static unsigned char init_ID_done, version_printed;
+ static unsigned char init_ID_done;
int i, irq, irqval, retval;
struct net_local *lp;
goto out;
}
- if (net_debug && version_printed++ == 0)
- printk(version);
-
- printk("%s: 3c507 at %#x,", dev->name, ioaddr);
+ pr_info("%s: 3c507 at %#x,", dev->name, ioaddr);
/* We should make a few more checks here, like the first three octets of
the S.A. for the manufacturer's code. */
irq = inb(ioaddr + IRQ_CONFIG) & 0x0f;
- irqval = request_irq(irq, &el16_interrupt, 0, DRV_NAME, dev);
+ irqval = request_irq(irq, el16_interrupt, 0, DRV_NAME, dev);
if (irqval) {
- printk(KERN_ERR "3c507: unable to get IRQ %d (irqval=%d).\n", irq, irqval);
+ pr_cont("\n");
+ pr_err("3c507: unable to get IRQ %d (irqval=%d).\n", irq, irqval);
retval = -EAGAIN;
goto out;
}
dev->base_addr = ioaddr;
outb(0x01, ioaddr + MISC_CTRL);
- for (i = 0; i < 6; i++) {
+ for (i = 0; i < 6; i++)
dev->dev_addr[i] = inb(ioaddr + i);
- printk(" %02x", dev->dev_addr[i]);
- }
+ pr_cont(" %pM", dev->dev_addr);
if (mem_start)
net_debug = mem_start & 7;
dev->if_port = (inb(ioaddr + ROM_CONFIG) & 0x80) ? 1 : 0;
dev->irq = inb(ioaddr + IRQ_CONFIG) & 0x0f;
- printk(", IRQ %d, %sternal xcvr, memory %#lx-%#lx.\n", dev->irq,
+ pr_cont(", IRQ %d, %sternal xcvr, memory %#lx-%#lx.\n", dev->irq,
dev->if_port ? "ex" : "in", dev->mem_start, dev->mem_end-1);
if (net_debug)
- printk(version);
+ pr_debug("%s", version);
lp = netdev_priv(dev);
- memset(lp, 0, sizeof(*lp));
spin_lock_init(&lp->lock);
lp->base = ioremap(dev->mem_start, RX_BUF_END);
if (!lp->base) {
- printk(KERN_ERR "3c507: unable to remap memory\n");
+ pr_err("3c507: unable to remap memory\n");
retval = -EAGAIN;
goto out1;
}
- dev->open = el16_open;
- dev->stop = el16_close;
- dev->hard_start_xmit = el16_send_packet;
- dev->get_stats = el16_get_stats;
- dev->tx_timeout = el16_tx_timeout;
+ dev->netdev_ops = &netdev_ops;
dev->watchdog_timeo = TX_TIMEOUT;
dev->ethtool_ops = &netdev_ethtool_ops;
dev->flags &= ~IFF_MULTICAST; /* Multicast doesn't work */
void __iomem *shmem = lp->base;
if (net_debug > 1)
- printk ("%s: transmit timed out, %s? ", dev->name,
+ pr_debug("%s: transmit timed out, %s? ", dev->name,
readw(shmem + iSCB_STATUS) & 0x8000 ? "IRQ conflict" :
"network cable problem");
/* Try to restart the adaptor. */
- if (lp->last_restart == lp->stats.tx_packets) {
+ if (lp->last_restart == dev->stats.tx_packets) {
if (net_debug > 1)
- printk ("Resetting board.\n");
+ pr_cont("Resetting board.\n");
/* Completely reset the adaptor. */
init_82586_mem (dev);
lp->tx_pkts_in_ring = 0;
} else {
/* Issue the channel attention signal and hope it "gets better". */
if (net_debug > 1)
- printk ("Kicking board.\n");
+ pr_cont("Kicking board.\n");
writew(0xf000 | CUC_START | RX_START, shmem + iSCB_CMD);
outb (0, ioaddr + SIGNAL_CA); /* Issue channel-attn. */
- lp->last_restart = lp->stats.tx_packets;
+ lp->last_restart = dev->stats.tx_packets;
}
- dev->trans_start = jiffies;
+ dev->trans_start = jiffies; /* prevent tx timeout */
netif_wake_queue (dev);
}
-static int el16_send_packet (struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t el16_send_packet (struct sk_buff *skb,
+ struct net_device *dev)
{
struct net_local *lp = netdev_priv(dev);
int ioaddr = dev->base_addr;
spin_lock_irqsave (&lp->lock, flags);
- lp->stats.tx_bytes += length;
+ dev->stats.tx_bytes += length;
/* Disable the 82586's input to the interrupt line. */
outb (0x80, ioaddr + MISC_CTRL);
hardware_send_packet (dev, buf, skb->len, length - skb->len);
- dev->trans_start = jiffies;
/* Enable the 82586 interrupt input. */
outb (0x84, ioaddr + MISC_CTRL);
/* You might need to clean up and record Tx statistics here. */
- return 0;
+ return NETDEV_TX_OK;
}
/* The typical workload of the driver:
void __iomem *shmem;
if (dev == NULL) {
- printk ("net_interrupt(): irq %d for unknown device.\n", irq);
+ pr_err("%s: net_interrupt(): irq %d for unknown device.\n",
+ dev->name, irq);
return IRQ_NONE;
}
status = readw(shmem+iSCB_STATUS);
if (net_debug > 4) {
- printk("%s: 3c507 interrupt, status %4.4x.\n", dev->name, status);
+ pr_debug("%s: 3c507 interrupt, status %4.4x.\n", dev->name, status);
}
/* Disable the 82586's input to the interrupt line. */
unsigned short tx_status = readw(shmem+lp->tx_reap);
if (!(tx_status & 0x8000)) {
if (net_debug > 5)
- printk("Tx command incomplete (%#x).\n", lp->tx_reap);
+ pr_debug("Tx command incomplete (%#x).\n", lp->tx_reap);
break;
}
/* Tx unsuccessful or some interesting status bit set. */
if (!(tx_status & 0x2000) || (tx_status & 0x0f3f)) {
- lp->stats.tx_errors++;
- if (tx_status & 0x0600) lp->stats.tx_carrier_errors++;
- if (tx_status & 0x0100) lp->stats.tx_fifo_errors++;
- if (!(tx_status & 0x0040)) lp->stats.tx_heartbeat_errors++;
- if (tx_status & 0x0020) lp->stats.tx_aborted_errors++;
- lp->stats.collisions += tx_status & 0xf;
+ dev->stats.tx_errors++;
+ if (tx_status & 0x0600) dev->stats.tx_carrier_errors++;
+ if (tx_status & 0x0100) dev->stats.tx_fifo_errors++;
+ if (!(tx_status & 0x0040)) dev->stats.tx_heartbeat_errors++;
+ if (tx_status & 0x0020) dev->stats.tx_aborted_errors++;
+ dev->stats.collisions += tx_status & 0xf;
}
- lp->stats.tx_packets++;
+ dev->stats.tx_packets++;
if (net_debug > 5)
- printk("Reaped %x, Tx status %04x.\n" , lp->tx_reap, tx_status);
+ pr_debug("Reaped %x, Tx status %04x.\n" , lp->tx_reap, tx_status);
lp->tx_reap += TX_BUF_SIZE;
if (lp->tx_reap > RX_BUF_START - TX_BUF_SIZE)
lp->tx_reap = TX_BUF_START;
if (status & 0x4000) { /* Packet received. */
if (net_debug > 5)
- printk("Received packet, rx_head %04x.\n", lp->rx_head);
+ pr_debug("Received packet, rx_head %04x.\n", lp->rx_head);
el16_rx(dev);
}
if ((status & 0x0700) != 0x0200 && netif_running(dev)) {
if (net_debug)
- printk("%s: Command unit stopped, status %04x, restarting.\n",
+ pr_debug("%s: Command unit stopped, status %04x, restarting.\n",
dev->name, status);
/* If this ever occurs we should really re-write the idle loop, reset
the Tx list, and do a complete restart of the command unit.
/* The Rx unit is not ready, it must be hung. Restart the receiver by
initializing the rx buffers, and issuing an Rx start command. */
if (net_debug)
- printk("%s: Rx unit stopped, status %04x, restarting.\n",
+ pr_debug("%s: Rx unit stopped, status %04x, restarting.\n",
dev->name, status);
init_rx_bufs(dev);
writew(RX_BUF_START,shmem+iSCB_RFA);
return 0;
}
-/* Get the current statistics. This may be called with the card open or
- closed. */
-static struct net_device_stats *el16_get_stats(struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
-
- /* ToDo: decide if there are any useful statistics from the SCB. */
-
- return &lp->stats;
-}
-
/* Initialize the Rx-block list. */
static void init_rx_bufs(struct net_device *dev)
{
memcpy_toio(lp->base, init_words + 5, sizeof(init_words) - 10);
/* Fill in the station address. */
- memcpy_toio(lp->base+SA_OFFSET, dev->dev_addr,
- sizeof(dev->dev_addr));
+ memcpy_toio(lp->base+SA_OFFSET, dev->dev_addr, ETH_ALEN);
/* The Tx-block list is written as needed. We just set up the values. */
lp->tx_cmd_link = IDLELOOP + 4;
int boguscnt = 50;
while (readw(shmem+iSCB_STATUS) == 0)
if (--boguscnt == 0) {
- printk("%s: i82586 initialization timed out with status %04x,"
- "cmd %04x.\n", dev->name,
- readw(shmem+iSCB_STATUS), readw(shmem+iSCB_CMD));
+ pr_warning("%s: i82586 initialization timed out with status %04x, cmd %04x.\n",
+ dev->name, readw(shmem+iSCB_STATUS), readw(shmem+iSCB_CMD));
break;
}
/* Issue channel-attn -- the 82586 won't start. */
/* Disable loopback and enable interrupts. */
outb(0x84, ioaddr + MISC_CTRL);
if (net_debug > 4)
- printk("%s: Initialized 82586, status %04x.\n", dev->name,
+ pr_debug("%s: Initialized 82586, status %04x.\n", dev->name,
readw(shmem+iSCB_STATUS));
- return;
}
static void hardware_send_packet(struct net_device *dev, void *buf, short length, short pad)
lp->tx_head = TX_BUF_START;
if (net_debug > 4) {
- printk("%s: 3c507 @%x send length = %d, tx_block %3x, next %3x.\n",
+ pr_debug("%s: 3c507 @%x send length = %d, tx_block %3x, next %3x.\n",
dev->name, ioaddr, length, tx_block, lp->tx_head);
}
void __iomem *data_frame = lp->base + data_buffer_addr;
ushort pkt_len = readw(data_frame);
- if (rfd_cmd != 0 || data_buffer_addr != rx_head + 22
- || (pkt_len & 0xC000) != 0xC000) {
- printk("%s: Rx frame at %#x corrupted, status %04x cmd %04x"
- "next %04x data-buf @%04x %04x.\n", dev->name, rx_head,
- frame_status, rfd_cmd, next_rx_frame, data_buffer_addr,
- pkt_len);
+ if (rfd_cmd != 0 || data_buffer_addr != rx_head + 22 ||
+ (pkt_len & 0xC000) != 0xC000) {
+ pr_err("%s: Rx frame at %#x corrupted, "
+ "status %04x cmd %04x next %04x "
+ "data-buf @%04x %04x.\n",
+ dev->name, rx_head, frame_status, rfd_cmd,
+ next_rx_frame, data_buffer_addr, pkt_len);
} else if ((frame_status & 0x2000) == 0) {
/* Frame Rxed, but with error. */
- lp->stats.rx_errors++;
- if (frame_status & 0x0800) lp->stats.rx_crc_errors++;
- if (frame_status & 0x0400) lp->stats.rx_frame_errors++;
- if (frame_status & 0x0200) lp->stats.rx_fifo_errors++;
- if (frame_status & 0x0100) lp->stats.rx_over_errors++;
- if (frame_status & 0x0080) lp->stats.rx_length_errors++;
+ dev->stats.rx_errors++;
+ if (frame_status & 0x0800) dev->stats.rx_crc_errors++;
+ if (frame_status & 0x0400) dev->stats.rx_frame_errors++;
+ if (frame_status & 0x0200) dev->stats.rx_fifo_errors++;
+ if (frame_status & 0x0100) dev->stats.rx_over_errors++;
+ if (frame_status & 0x0080) dev->stats.rx_length_errors++;
} else {
/* Malloc up new buffer. */
struct sk_buff *skb;
pkt_len &= 0x3fff;
skb = dev_alloc_skb(pkt_len+2);
if (skb == NULL) {
- printk("%s: Memory squeeze, dropping packet.\n", dev->name);
- lp->stats.rx_dropped++;
+ pr_err("%s: Memory squeeze, dropping packet.\n",
+ dev->name);
+ dev->stats.rx_dropped++;
break;
}
skb->protocol=eth_type_trans(skb,dev);
netif_rx(skb);
- dev->last_rx = jiffies;
- lp->stats.rx_packets++;
- lp->stats.rx_bytes += pkt_len;
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += pkt_len;
}
/* Clear the status word and set End-of-List on the rx frame. */
int __init init_module(void)
{
if (io == 0)
- printk("3c507: You should not use auto-probing with insmod!\n");
+ pr_notice("3c507: You should not use auto-probing with insmod!\n");
dev_3c507 = el16_probe(-1);
return IS_ERR(dev_3c507) ? PTR_ERR(dev_3c507) : 0;
}
}
#endif /* MODULE */
MODULE_LICENSE("GPL");
-
-
-/*
- * Local variables:
- * compile-command: "gcc -D__KERNEL__ -I/usr/src/linux/net/inet -I/usr/src/linux/drivers/net -Wall -Wstrict-prototypes -O6 -m486 -c 3c507.c"
- * version-control: t
- * kept-new-versions: 5
- * tab-width: 4
- * c-indent-level: 4
- * End:
- */